1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
|
/*
* Copyright 2013 Google Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <stdlib.h>
#include <config.h>
#include <types.h>
#include <console/uart.h>
#include <arch/io.h>
#include <boot/coreboot_tables.h>
#include <cpu/ti/am335x/uart.h>
#define EFR_ENHANCED_EN (1 << 4)
#define FCR_FIFO_EN (1 << 0)
#define MCR_TCR_TLR (1 << 6)
#define SYSC_SOFTRESET (1 << 1)
#define SYSS_RESETDONE (1 << 0)
#define LSR_RXFIFOE (1 << 0)
#define LSR_TXFIFOE (1 << 5)
/*
* Initialise the serial port with the given baudrate divisor. The settings
* are always 8 data bits, no parity, 1 stop bit, no start bits.
*/
static void am335x_uart_init(struct am335x_uart *uart, uint16_t div)
{
uint16_t lcr_orig, efr_orig, mcr_orig;
/* reset the UART */
write16(uart->sysc | SYSC_SOFTRESET, &uart->sysc);
while (!(read16(&uart->syss) & SYSS_RESETDONE))
;
/* 1. switch to register config mode B */
lcr_orig = read16(&uart->lcr);
write16(0xbf, &uart->lcr);
/*
* 2. Set EFR ENHANCED_EN bit. To access this bit, registers must
* be in TCR_TLR submode, meaning EFR[4] = 1 and MCR[6] = 1.
*/
efr_orig = read16(&uart->efr);
write16(efr_orig | EFR_ENHANCED_EN, &uart->efr);
/* 3. Switch to register config mode A */
write16(0x80, &uart->lcr);
/* 4. Enable register submode TCR_TLR to access the UARTi.UART_TLR */
mcr_orig = read16(&uart->mcr);
write16(mcr_orig | MCR_TCR_TLR, &uart->mcr);
/* 5. Enable the FIFO. For now we'll ignore FIFO triggers and DMA */
write16(FCR_FIFO_EN, &uart->fcr);
/* 6. Switch to configuration mode B */
write16(0xbf, &uart->lcr);
/* Skip steps 7 and 8 (setting up FIFO triggers for DMA) */
/* 9. Restore original EFR value */
write16(efr_orig, &uart->efr);
/* 10. Switch to config mode A */
write16(0x80, &uart->lcr);
/* 11. Restore original MCR value */
write16(mcr_orig, &uart->mcr);
/* 12. Restore original LCR value */
write16(lcr_orig, &uart->lcr);
/* Protocol, baud rate and interrupt settings */
/* 1. Disable UART access to DLL and DLH registers */
write16(read16(&uart->mdr1) | 0x7, &uart->mdr1);
/* 2. Switch to config mode B */
write16(0xbf, &uart->lcr);
/* 3. Enable access to IER[7:4] */
write16(efr_orig | EFR_ENHANCED_EN, &uart->efr);
/* 4. Switch to operational mode */
write16(0x0, &uart->lcr);
/* 5. Clear IER */
write16(0x0, &uart->ier);
/* 6. Switch to config mode B */
write16(0xbf, &uart->lcr);
/* 7. Set dll and dlh to the desired values (table 19-25) */
write16((div >> 8), &uart->dlh);
write16((div & 0xff), &uart->dll);
/* 8. Switch to operational mode to access ier */
write16(0x0, &uart->lcr);
/* 9. Clear ier to disable all interrupts */
write16(0x0, &uart->ier);
/* 10. Switch to config mode B */
write16(0xbf, &uart->lcr);
/* 11. Restore efr */
write16(efr_orig, &uart->efr);
/* 12. Set protocol formatting 8n1 (8 bit data, no parity, 1 stop bit) */
write16(0x3, &uart->lcr);
/* 13. Load the new UART mode */
write16(0x0, &uart->mdr1);
}
/*
* Read a single byte from the serial port. Returns 1 on success, 0
* otherwise. When the function is successful, the character read is
* written into its argument c.
*/
static unsigned char am335x_uart_rx_byte(struct am335x_uart *uart)
{
while (!(read16(&uart->lsr) & LSR_RXFIFOE));
return read8(&uart->rhr);
}
/*
* Output a single byte to the serial port.
*/
static void am335x_uart_tx_byte(struct am335x_uart *uart, unsigned char data)
{
while (!(read16(&uart->lsr) & LSR_TXFIFOE));
return write8(data, &uart->thr);
}
unsigned int uart_platform_refclk(void)
{
return 48000000;
}
uintptr_t uart_platform_base(int idx)
{
const unsigned int bases[] = {
0x44e09000, 0x48022000, 0x48024000,
0x481a6000, 0x481a8000, 0x481aa000
};
if (idx < ARRAY_SIZE(bases))
return bases[idx];
return 0;
}
void uart_init(int idx)
{
struct am335x_uart *uart = uart_platform_baseptr(idx);
uint16_t div = (uint16_t) uart_baudrate_divisor(
default_baudrate(), uart_platform_refclk(), 16);
am335x_uart_init(uart, div);
}
unsigned char uart_rx_byte(int idx)
{
struct am335x_uart *uart = uart_platform_baseptr(idx);
return am335x_uart_rx_byte(uart);
}
void uart_tx_byte(int idx, unsigned char data)
{
struct am335x_uart *uart = uart_platform_baseptr(idx);
am335x_uart_tx_byte(uart, data);
}
void uart_tx_flush(int idx)
{
}
#ifndef __PRE_RAM__
void uart_fill_lb(void *data)
{
struct lb_serial serial;
serial.type = LB_SERIAL_TYPE_MEMORY_MAPPED;
serial.baseaddr = uart_platform_base(CONFIG_UART_FOR_CONSOLE);
serial.baud = default_baudrate();
lb_add_serial(&serial, data);
lb_add_console(LB_TAG_CONSOLE_SERIAL8250MEM, data);
}
#endif
|
