path: root/src/cpu/amd/model_fxx/fidvid.c

#if CONFIG_SET_FIDVID

#ifndef SB_VFSMAF
#define SB_VFSMAF 1
#endif

#define FX_SUPPORT 1

static inline void print_debug_fv(const char *str, u32 val)
{
#if CONFIG_SET_FIDVID_DEBUG
	printk(BIOS_DEBUG, "%s%x\n", str, val);
#endif
}

static inline void print_debug_fv_8(const char *str, u8 val)
{
#if CONFIG_SET_FIDVID_DEBUG
	printk(BIOS_DEBUG, "%s%02x\n", str, val);
#endif
}

static inline void print_debug_fv_64(const char *str, u32 val, u32 val2)
{
#if CONFIG_SET_FIDVID_DEBUG
	printk(BIOS_DEBUG, "%s%x%x\n", str, val, val2);
#endif
}

static void enable_fid_change(void)
{
	u32 dword;
	u32 nodes;
	int i;

	nodes = ((pci_read_config32(PCI_DEV(0, 0x18, 0), 0x60) >> 4) & 7) + 1;

	for (i = 0; i < nodes; i++) {
		dword = pci_read_config32(PCI_DEV(0, 0x18 + i, 3), 0xd8);
		dword &= 0x8ff00000;
		dword |= (2 << 28) | (0x02710);
		pci_write_config32(PCI_DEV(0, 0x18 + i, 3), 0xd8, dword);

		dword = 0x04e2a707;
		pci_write_config32(PCI_DEV(0, 0x18 + i, 3), 0xd4, dword);

		/* disable the DRAM interface at first, it will be enabled
		 * by raminit again (see also erratum #181) */
#if CONFIG_K8_REV_F_SUPPORT
		dword = pci_read_config32(PCI_DEV(0, 0x18 + i, 2), 0x94);
		dword |= (1 << 14);
		pci_write_config32(PCI_DEV(0, 0x18 + i, 2), 0x94, dword);
#else
		dword = pci_read_config32(PCI_DEV(0, 0x18 + i, 2), 0x90);
		dword |= (1 << 24);
		pci_write_config32(PCI_DEV(0, 0x18 + i, 2), 0x90, dword);
		dword = pci_read_config32(PCI_DEV(0, 0x18 + i, 2), 0x94);
		dword |= (1 << 25);
		pci_write_config32(PCI_DEV(0, 0x18 + i, 2), 0x94, dword);
#endif

		dword = 0x23070700;	/* enable FID/VID change */
//              dword = 0x00070000; /* enable FID/VID change */
		pci_write_config32(PCI_DEV(0, 0x18 + i, 3), 0x80, dword);

#if CONFIG_HAVE_ACPI_RESUME
		dword = 0x21132113;
#else
		dword = 0x00132113;
#endif
		pci_write_config32(PCI_DEV(0, 0x18 + i, 3), 0x84, dword);

	}
}

#if !CONFIG_SET_FIDVID_ONE_BY_ONE
static unsigned set_fidvid_without_init(unsigned fidvid)
{
	msr_t msr;
	u32 vid;
	u32 fid;

	fid = (fidvid >> 8) & 0x3f;
	vid = (fidvid >> 16) & 0x3f;

	/* set new FID/VID */
	msr.hi = 1;
	msr.lo = (vid << 8) | fid;
	wrmsr(0xc0010041, msr);
	return fidvid;
}
#endif

static u32 set_fidvid(unsigned apicid, unsigned fidvid, int showmessage)
{

/*  CurrentFID--> 4x(00h)   5x(02h)   6x(04h)   7x(06h) ...
 *       --------------------------------------
 * TargetFID   | Next_FID, Next_FID, Next_FID, Next_FID ...
 *      |      | Next_FID, Next_FID, Next_FID, Next_FID ...
 *     \|/     | Next_FID, Next_FID, Next_FID, Next_FID ...
 */
	static const u8 next_fid_200[] = {
/*         x4  x5  x6  x7  x8  x9 x10 x11 x12 x13 x14 x15  x16 */
/* x4 */    0, -1, -1, -1,  0,  0,  9, 10, 11, 12, 13, 14, 15, /*  800 */
/* x5 */   -1,  0, -1, -1, -1,  5,  5,  5, 11, 12, 13, 14, 15, /* 1000 */
/* x6 */   -1, -1,  0, -1, -1, -1, -1,  6,  6,  6, 13, 14, 15, /* 1200 */
/* x7 */   -1, -1, -1,  0, -1, -1, -1, -1, -1,  7,  7,  7, 15, /* 1400 */
/* lower table to upper table boarder (table 70 and 71 in BKDG) */
/* x8 */    8, -1, -1, -1,  0,  8,  9, 10, 11, 12, 13, 14, 15, /* 1600 */
/* x9 */    9,  9, -1, -1,  9,  0,  9, 10, 11, 12, 13, 14, 15, /* 1800 */
/*x10 */    9, 10, -1, -1,  9, 10,  0, 10, 11, 12, 13, 14, 15, /* 2000 */
/*x11 */    9, 11, 11, -1,  9, 10, 11,  0, 11, 12, 13, 14, 15, /* 2200 */
/*x12 */    9, 11, 12, -1,  9, 10, 11, 12,  0, 12, 13, 14, 15, /* 2400 */
/*x13 */    9, 11, 13, 13,  9, 10, 11, 12, 13,  0, 13, 14, 15, /* 2600 */
/*x14 */    9, 11, 13, 14,  9, 10, 11, 12, 13, 14,  0, 14, 15, /* 2800 */
/*x15 */    9, 11, 13, 15,  9, 10, 11, 12, 13, 14, 15,  0, 15, /* 3000 */
/*x15 */    9, 11, 13, 15,  9, 10, 11, 12, 13, 14, 15, 16,  0, /* 3200 */
	};

	msr_t msr;
	u32 vid_new;
	u32 fid_new;
	u32 vid_max;
	u32 fid_max;
	u32 vid_cur;
	u32 fid_cur;
	unsigned apicidx;

	int step_limit;
	int loop;

	apicidx = lapicid();

	if (apicid != apicidx) {
		printk(BIOS_ERR,
		       "wrong apicid, we want change %x, but it is %x\n",
		       apicid, apicidx);
		return fidvid;
	}

	fid_new = (fidvid >> 8) & 0x3f;
	vid_new = (fidvid >> 16) & 0x3f;

	msr = rdmsr(0xc0010042);

	vid_cur = msr.hi & 0x3f;
	fid_cur = msr.lo & 0x3f;

	if ((vid_cur == vid_new) && (fid_cur == fid_new))
		return fidvid;

	vid_max = (msr.hi >> (48 - 32)) & 0x3f;
	fid_max = ((msr.lo >> 16) & 0x3f);	/* max fid */

#if FX_SUPPORT
	if (fid_max >= ((25 - 4) * 2)) {	/* FX max fid is 5G */
		fid_max = ((msr.lo >> 8) & 0x3f) + 5 * 2;	/* max FID is min fid + 1G */
		if (fid_max >= ((25 - 4) * 2)) {
			fid_max = (10 - 4) * 2;	/* hard set to 2G */
		}
	}
#endif

	/* set vid to max */
	/* TODO - make this more correct. Not a big deal for setting max...
	 * BKDG figure 11
	 * if TargetFID > InitialFID
	 *      TargetVID = FinalVID - RVO
	 * else
	 *      if CurrentVID > FinalVID
	 *              TargetVID = FinalVID - RVO
	 *      else
	 *              TargetVID = CurrentVIDD - RVO
	 */
	msr.hi = 1;
	msr.lo = (vid_max << 8) | (fid_cur);
#if SB_VFSMAF == 1
	msr.lo |= (1 << 16);	/* init changes */
#endif
	wrmsr(0xc0010041, msr);
#if SB_VFSMAF == 0
	ldtstop_sb();
#endif

	for (loop = 0; loop < 100000; loop++) {
		msr = rdmsr(0xc0010042);
		if (!(msr.lo & (1 << 31)))
			break;
	}
	vid_cur = msr.hi & 0x3f;

	/* BKDG figure 12 and 13
	 * if current fid is odd
	 *	current fid -1 (next lower and even fid)(odd fid for rev G)
	 * if current fid in high-freq table
	 *	while current fid < target fid
	 *		transition to next higher fid in table
	 * else if target fid > VCO portal of current fid
	 *	transition to highest portal fid in higher fid table
	 *		while current fid < target fid
	 *			transition to next higher fid in table
	 * else
	 *	transition to target fid
	 */

	printk(BIOS_DEBUG, "Current fid_cur: 0x%x, fid_max: 0x%x\n", fid_cur,
	       fid_max);
	printk(BIOS_DEBUG, "Requested fid_new: 0x%x\n", fid_new);

	step_limit = 8;		/* max 8 steps just in case... */
	while ((fid_cur != fid_new) && (step_limit--)) {
		u32 fid_temp;
		int step;

		if (fid_cur < fid_new)
			/* Force Fid steps even. step == 0 means 100MHz step */
			step = ((fid_new / 2) - (fid_cur / 2)) * 2;
		else
			step = ((fid_cur / 2) - (fid_new / 2)) * 2;

		/* If 200MHz step OR past 3200 max table value */
		if ((step == 2) || (fid_new >= 0x18 || fid_cur >= 0x18)) {

			printk(BIOS_DEBUG, "200MHz step ");

			/* Step +/- 200MHz at a time */
			if (fid_cur < fid_new)
				fid_temp = fid_cur + 2;
			else
				fid_temp = fid_cur - 2;

		} else if (step > 2) {	/* If more than a 200MHz step */
			int temp;

			/* look it up in the table */
			printk(BIOS_DEBUG, "FidVid table step ");

			temp =
			    next_fid_200[((fid_new / 2) * 13) + (fid_cur / 2)];

			if (temp > 0)
				fid_temp = (temp - 4) * 2;	/* Table 108 */
			else if (temp == 0)
				fid_temp = fid_new;
			else
				break;	/* table error */

		} else {	/* step < 2 (100MHz) */
			printk(BIOS_DEBUG, "100MHz step ");

			/* The table adjust in 200MHz increments. If requested,
			 * do the 100MHz increment if the CPU supports it.*/
			if (cpuid_edx(0x80000007) & (1 << 6)) {
				fid_temp = fid_cur + 1;
			} else {
				/* 100 MHz not supported. Get out of the loop */
				printk(BIOS_DEBUG, "is not supported.\n");
				break;
			}
		}

		if (fid_temp > fid_max) {
			printk(BIOS_DEBUG, "fid_temp 0x%x > fid_max 0x%x\n",
			       fid_temp, fid_max);
			break;
		}

		printk(BIOS_DEBUG, "fidvid: 0x%x\n", fid_temp);

		/* set target fid */
		msr.hi = 0x190;	/* 2 us for AMD NPT Family 0Fh Processors */
		msr.lo = (vid_cur << 8) | fid_temp;
#if SB_VFSMAF == 1
		msr.lo |= (1 << 16);	/* init changes */
#endif
		wrmsr(0xc0010041, msr);
#if SB_VFSMAF == 0
		ldtstop_sb();
#endif

#if CONFIG_SET_FIDVID_DEBUG
		if (showmessage) {
			print_debug_fv_8("set_fidvid APICID = ", apicid);
			print_debug_fv_64("fidvid ctrl msr ", msr.hi, msr.lo);
		}
#endif

		for (loop = 0; loop < 100000; loop++) {
			msr = rdmsr(0xc0010042);
			if (!(msr.lo & (1 << 31)))
				break;
		}
		fid_cur = msr.lo & 0x3f;

#if CONFIG_SET_FIDVID_DEBUG
		if (showmessage) {
			print_debug_fv_64("fidvid status msr ", msr.hi, msr.lo);
		}
#endif
	}

	/* set vid to final */
	/* TODO - make this more correct. Not a big deal for setting max...
	 * BKDG figure 11
	 * if TargetFID > InitialFID
	 *	TargetVID = FinalVID - RVO
	 * else
	 *	if CurrentVID > FinalVID
	 *		TargetVID = FinalVID - RVO
	 *	else
	 *		TargetVID = CurrentVIDD - RVO
	 */
	msr.hi = 1;
	msr.lo = (vid_new << 8) | (fid_cur);
#if SB_VFSMAF == 1
	msr.lo |= (1 << 16);	// init changes
#endif
	wrmsr(0xc0010041, msr);
#if SB_VFSMAF == 0
	ldtstop_sb();
#endif

	for (loop = 0; loop < 100000; loop++) {
		msr = rdmsr(0xc0010042);
		if (!(msr.lo & (1 << 31)))
			break;
	}
	vid_cur = msr.hi & 0x3f;

	fidvid = (vid_cur << 16) | (fid_cur << 8);

	if (showmessage) {
		if (vid_new != vid_cur) {
			printk(BIOS_ERR, "set vid failed for apicid =%02x\n",
			       apicidx);
		}
		if (fid_new != fid_cur) {
			printk(BIOS_ERR, "set fid failed for apicid =%02x\n",
			       apicidx);
		}
	}

	return fidvid;

}

static void init_fidvid_ap(unsigned bsp_apicid, unsigned apicid)
{
	u32 send;
	u32 readback = 0;
	unsigned timeout = 1;
	msr_t msr;
	u32 vid_cur;
	u32 fid_cur;
	u32 fid_max;
	int loop;

	if ((cpuid_edx(0x80000007) & 0x06) != 0x06)
		return; /* FID/VID change not supported */

	msr = rdmsr(0xc0010042);
	fid_max = ((msr.lo >> 16) & 0x3f);	/* max fid */
#if FX_SUPPORT
	if (fid_max >= ((25 - 4) * 2)) {	/* FX max fid is 5G */
		fid_max = ((msr.lo >> 8) & 0x3f) + 5 * 2;	/* maxFID = minFID + 1G */
		if (fid_max >= ((25 - 4) * 2)) {
			fid_max = (10 - 4) * 2;	/* hard set to 2G */
		}
	}
#endif
	send = fid_max << 8;

	send |= ((msr.hi >> (48 - 32)) & 0x3f) << 16;	/* max vid */
	send |= (apicid << 24);	/* ap apicid */

#if CONFIG_SET_FIDVID_ONE_BY_ONE
	vid_cur = msr.hi & 0x3f;
	fid_cur = msr.lo & 0x3f;

	/* set to current */
	msr.hi = 1;
	msr.lo = (vid_cur << 8) | (fid_cur);
	wrmsr(0xc0010041, msr);
#endif

	timeout = wait_cpu_state(bsp_apicid, 1);
	if (timeout) {
		printk(BIOS_DEBUG, "fidvid_ap_stage1: time out while reading"
		       " from BSP on %02x\n", apicid);
	}
	/* send signal to BSP about this AP max fid and vid */
	/* AP at state 1 that sent our fid and vid */
	lapic_write(LAPIC_MSG_REG, send | 1);

//      wait_cpu_state(bsp_apicid, 2); /* don't need we can use apicid directly */
	loop = 1000000;
	while (--loop > 0) {
		/* remote read BSP signal that include vid/fid that need to set */
		if (lapic_remote_read(bsp_apicid, LAPIC_MSG_REG, &readback) !=
		    0)
			continue;
		if (((readback >> 24) & 0xff) == apicid)
			break;	/* it is this cpu turn */
	}

	if (loop > 0) {
#if CONFIG_SET_FIDVID_ONE_BY_ONE
		readback = set_fidvid(apicid, readback & 0xffff00, 1);	// this AP
#else
		readback = set_fidvid_without_init(readback & 0xffff00);	// this AP
#endif
		/* send signal to BSP that this AP fid/vid is set */
		/* allow to change state2 is together with apicid */
		/* AP at state that We set the requested fid/vid */
		send = (apicid << 24) | (readback & 0x00ffff00);
	} else {
		printk(BIOS_DEBUG, "%s: time out while reading from BSP on %02x",
		       __func__, apicid);
	}

	lapic_write(LAPIC_MSG_REG, send | 2);

	timeout = wait_cpu_state(bsp_apicid, 3);
	if (timeout) {
		printk(BIOS_DEBUG, "%s: time out while reading from BSP on %02x",
		       __func__, apicid);
	}
}

static u32 calc_common_fidvid(unsigned fidvid, unsigned fidvidx)
{
	/* FIXME: need to check the change path to verify if it is reachable
	 * when common fid is small than 1.6G */
	if ((fidvid & 0xff00) <= (fidvidx & 0xff00)) {
		return fidvid;
	} else {
		return fidvidx;
	}
}

struct fidvid_st {
	unsigned common_fidvid;
};

static void init_fidvid_bsp_stage1(u32 ap_apicid, void *gp)
{
	u32 readback = 0;
	u32 timeout = 1;

	struct fidvid_st *fvp = gp;
	int loop;

	print_debug_fv("state 1: ap_apicid=", ap_apicid);

	loop = 1000000;
	while (--loop > 0) {
		if (lapic_remote_read(ap_apicid, LAPIC_MSG_REG, &readback) != 0)
			continue;
		if ((readback & 0xff) == 1) {
			timeout = 0;
			break;	/* target ap is in stage 1 */
		}
	}

	if (timeout) {
		printk(BIOS_DEBUG, "%s: timed out reading from ap %02x\n",
		       __func__, ap_apicid);
		return;
	}

	print_debug_fv("\treadback = ", readback);

	fvp->common_fidvid = calc_common_fidvid(fvp->common_fidvid, readback & 0xffff00);

	print_debug_fv("\tcommon_fidvid=", fvp->common_fidvid);
}

static void init_fidvid_bsp_stage2(unsigned ap_apicid, void *gp)
{
	unsigned readback = 0;
	unsigned timeout = 1;

	struct fidvid_st *fvp = gp;
	int loop;

	print_debug_fv("state 2: ap_apicid=", ap_apicid);

	/* all set to state2 */
	lapic_write(LAPIC_MSG_REG, fvp->common_fidvid | (ap_apicid << 24) | 2);

	loop = 1000000;
	while (--loop > 0) {
		if (lapic_remote_read(ap_apicid, LAPIC_MSG_REG, &readback) != 0)
			continue;
		if ((readback & 0xff) == 2) {
			timeout = 0;
			break;	/* target ap is stage 2, its FID has been set */
		}
	}

	if (timeout) {
		printk(BIOS_DEBUG, "%s: time out while reading from ap %02x",
		       __func__, ap_apicid);
		return;
	}

	print_debug_fv("\treadback=", readback);
}

#if CONFIG_SET_FIDVID_STORE_AP_APICID_AT_FIRST
struct ap_apicid_st {
	u32 num;
	unsigned apicid[16];	/* 8 way dual core need 16 */
};

static void store_ap_apicid(unsigned ap_apicid, void *gp)
{
	struct ap_apicid_st *p = gp;

	p->apicid[p->num++] = ap_apicid;

}
#endif

static void init_fidvid_bsp(unsigned bsp_apicid)
{
	u32 vid_max;
	u32 fid_max;

	struct fidvid_st fv;

#if CONFIG_SET_FIDVID_STORE_AP_APICID_AT_FIRST
	struct ap_apicid_st ap_apicidx;
	unsigned i;
#endif

	msr_t msr;
	msr = rdmsr(0xc0010042);
	fid_max = ((msr.lo >> 16) & 0x3f);	/* max fid */
#if FX_SUPPORT == 1
	if (fid_max >= ((25 - 4) * 2)) {	/* FX max fid is 5G */
		fid_max = ((msr.lo >> 8) & 0x3f) + 5 * 2;	/* maxFID = minFID + 1G */
		if (fid_max >= ((25 - 4) * 2)) {
			fid_max = (10 - 4) * 2;	/* hard set to 2G */
		}
	}
#endif
	vid_max = ((msr.hi >> (48 - 32)) & 0x3f);	//max vid
	fv.common_fidvid = (fid_max << 8) | (vid_max << 16);

	/* for all APs (We know the APIC ID of all APs even the APIC ID is lifted)
	 * remote read from AP about max fid/vid */

	/* let all ap trains to state 1 */
	lapic_write(LAPIC_MSG_REG, (bsp_apicid << 24) | 1);

	/* calculate the common max fid/vid that could be used for
	 * all APs and BSP */
#if CONFIG_SET_FIDVID_STORE_AP_APICID_AT_FIRST
	ap_apicidx.num = 0;

	for_each_ap(bsp_apicid, CONFIG_SET_FIDVID_CORE0_ONLY, store_ap_apicid, &ap_apicidx);

	for (i = 0; i < ap_apicidx.num; i++) {
		init_fidvid_bsp_stage1(ap_apicidx.apicid[i], &fv);
	}
#else
	for_each_ap(bsp_apicid, CONFIG_SET_FIDVID_CORE0_ONLY, init_fidvid_bsp_stage1, &fv);
#endif

#if 0
	unsigned fid, vid;
	/* Can we use max only? So we can only set fid in one around,
	 * otherwise we need to set that to max after raminit */
	/* set fid vid to DQS training required */
	fid = (fv.common_fidvid >> 8) & 0x3f;
	vid = (fv.common_fidvid >> 16) & 0x3f;

	if (fid > (10 - 4) * 2) {
		fid = (10 - 4) * 2;	// x10
	}

	if (vid >= 0x1f) {
		vid += 4;	/* unit is 12.5mV */
	} else {
		vid += 2;	/* unit is 25mV */
	}

	fv.common_fidvid = (fid << 8) | (vid << 16);

	print_debug_fv("common_fidvid=", fv.common_fidvid);

#endif

#if CONFIG_SET_FIDVID_ONE_BY_ONE
	/* set BSP fid and vid */
	print_debug_fv("bsp apicid=", bsp_apicid);
	fv.common_fidvid = set_fidvid(bsp_apicid, fv.common_fidvid, 1);
	print_debug_fv("common_fidvid=", fv.common_fidvid);
#endif

	/* For all APs ( We know the APIC ID of all AP even the APIC ID is lifted)
	 *  send signal to the AP it could change it's fid/vid */
	/* remote read signal from AP that AP is done */

	fv.common_fidvid &= 0xffff00;

	/* set state 2 allow is in init_fidvid_bsp_stage2 */
#if CONFIG_SET_FIDVID_STORE_AP_APICID_AT_FIRST
	for (i = 0; i < ap_apicidx.num; i++) {
		init_fidvid_bsp_stage2(ap_apicidx.apicid[i], &fv);
	}
#else
	for_each_ap(bsp_apicid, CONFIG_SET_FIDVID_CORE0_ONLY, init_fidvid_bsp_stage2, &fv);
#endif

#if !CONFIG_SET_FIDVID_ONE_BY_ONE
	/* set BSP fid and vid */
	print_debug_fv("bsp apicid=", bsp_apicid);
	fv.common_fidvid = set_fidvid(bsp_apicid, fv.common_fidvid, 1);
	print_debug_fv("common_fidvid=", fv.common_fidvid);

#endif

	/* clear the state */
	lapic_write(LAPIC_MSG_REG, fv.common_fidvid | (bsp_apicid << 24) | 3);

	/* here wait a while, so last ap could read pack, and stop it, don't
	 * call init_timer too early or just don't use init_timer */
}
#endif