path: root/src/acpi/device.c

/* SPDX-License-Identifier: GPL-2.0-only */

#include <assert.h>
#include <string.h>
#include <acpi/acpi.h>
#include <acpi/acpi_device.h>
#include <acpi/acpigen.h>
#include <acpi/acpigen_pci.h>
#include <device/device.h>
#include <stdlib.h>
#include <types.h>
#include <crc_byte.h>

#if CONFIG(GENERIC_GPIO_LIB)
#include <gpio.h>
#endif

#define ACPI_DP_UUID		"daffd814-6eba-4d8c-8a91-bc9bbf4aa301"
#define ACPI_DP_CHILD_UUID	"dbb8e3e6-5886-4ba6-8795-1319f52a966b"

/*
 * Below properties are defined at
 * https://docs.microsoft.com/en-us/windows-hardware/drivers/pci/dsd-for-pcie-root-ports
 */
#define ACPI_DSD_EXTERNAL_FACING_PORT_UUID "EFCC06CC-73AC-4BC3-BFF0-76143807C389"
#define ACPI_DSD_EXTERNAL_FACING_PORT_NAME "ExternalFacingPort"

#define ACPI_DSD_HOTPLUG_IN_D3_UUID "6211E2C0-58A3-4AF3-90E1-927A4E0C55A4"
#define ACPI_DSD_HOTPLUG_IN_D3_NAME "HotPlugSupportInD3"

/* ID for the DmaProperty _DSD */
#define ACPI_DSD_DMA_PROPERTY_UUID "70D24161-6DD5-4C9E-8070-705531292865"
#define ACPI_DSD_DMA_PROPERTY_NAME "DmaProperty"

/*
 * Below properties are defined at
 * https://docs.microsoft.com/en-us/windows-hardware/design/component-guidelines/power-management-for-storage-hardware-devices-intro
 */
#define ACPI_DSD_STORAGE_D3_UUID "5025030F-842F-4AB4-A561-99A5189762D0"
#define ACPI_DSD_STORAGE_D3_NAME "StorageD3Enable"

/* Write GPIO descriptor of DSD property */
int acpi_device_write_dsd_gpio(struct acpi_gpio *gpio, int *curr_index)
{
	int ret = -1;

	if (!gpio || !curr_index)
		return ret;

	if (gpio->pin_count == 0)
		return ret;

	acpi_device_write_gpio(gpio);
	ret = *curr_index++;

	return ret;
}

/* Write empty word value and return pointer to it */
static void *acpi_device_write_zero_len(void)
{
	char *p = acpigen_get_current();
	acpigen_emit_word(0);
	return p;
}

/* Fill in length value from start to current at specified location */
static void acpi_device_fill_from_len(char *ptr, char *start)
{
	uint16_t len = acpigen_get_current() - start;
	ptr[0] = len & 0xff;
	ptr[1] = (len >> 8) & 0xff;
}

/*
 * Fill in the length field with the value calculated from after
 * the 16bit field to acpigen current as this length value does
 * not include the length field itself.
 */
static void acpi_device_fill_len(void *ptr)
{
	acpi_device_fill_from_len(ptr, ptr + sizeof(uint16_t));
}

/* Locate and return the ACPI name for this device */
const char *acpi_device_name(const struct device *dev)
{
	const struct device *pdev = dev;
	const char *name = NULL;

	if (!dev)
		return NULL;

	/* Check for device specific handler */
	if (dev->ops && dev->ops->acpi_name) {
		name = dev->ops->acpi_name(dev);
		if (name)
			return name;
	}

	/* Walk up the tree to find if any parent can identify this device */
	while (pdev->upstream) {
		pdev = pdev->upstream->dev;
		if (!pdev)
			break;
		if (is_root_device(pdev))
			break;
		if (pdev->ops && pdev->ops->acpi_name)
			name = pdev->ops->acpi_name(dev);
		if (name)
			return name;
	}

	return NULL;
}

/* Locate and return the ACPI _HID (Hardware ID) for this device */
const char *acpi_device_hid(const struct device *dev)
{
	if (!dev)
		return NULL;

	/* Check for device specific handler */
	if (dev->ops->acpi_hid)
		return dev->ops->acpi_hid(dev);

	/*
	 * Don't walk up the tree to find any parent that can identify this device, as
	 * PNP devices are hard to identify.
	 */

	return NULL;
}

/*
 * Generate unique ID based on the ACPI path.
 * Collisions on the same _HID are possible but very unlikely.
 */
uint32_t acpi_device_uid(const struct device *dev)
{
	const char *path = acpi_device_path(dev);
	if (!path)
		return 0;

	return CRC(path, strlen(path), crc32_byte);
}

/* Recursive function to find the root device and print a path from there */
static ssize_t acpi_device_path_fill(const struct device *dev, char *buf,
				     size_t buf_len, size_t cur)
{
	const char *name = acpi_device_name(dev);
	ssize_t next = 0;

	if (!name)
		return -1;

	/*
	 * Make sure this name segment will fit, including the path segment
	 * separator and possible NUL terminator if this is the last segment.
	 */
	if (!dev || (cur + strlen(name) + 2) > buf_len)
		return cur;

	/* Walk up the tree to the root device */
	if (!is_root_device(dev) && dev->upstream && dev->upstream->dev)
		next = acpi_device_path_fill(dev->upstream->dev, buf, buf_len, cur);
	if (next < 0)
		return next;

	/* Fill in the path from the root device */
	next += snprintf(buf + next, buf_len - next, "%s%s",
			 (is_root_device(dev) || (strlen(name) == 0)) ?
			 "" : ".", name);

	return next;
}

/*
 * Warning: just as with dev_path() this uses a static buffer
 * so should not be called multiple times in one statement
 */
const char *acpi_device_path(const struct device *dev)
{
	static char buf[DEVICE_PATH_MAX] = {};

	if (!dev)
		return NULL;

	if (acpi_device_path_fill(dev, buf, sizeof(buf), 0) <= 0)
		return NULL;

	return buf;
}

/* Return the path of the parent device as the ACPI Scope for this device */
const char *acpi_device_scope(const struct device *dev)
{
	static char buf[DEVICE_PATH_MAX] = {};

	if (!dev || !dev->upstream || !dev->upstream->dev)
		return NULL;

	if (acpi_device_path_fill(dev->upstream->dev, buf, sizeof(buf), 0) <= 0)
		return NULL;

	return buf;
}

/* Concatenate the device path and provided name suffix */
const char *acpi_device_path_join(const struct device *dev, const char *name)
{
	static char buf[DEVICE_PATH_MAX] = {};
	ssize_t len;

	if (!dev)
		return NULL;

	/* Build the path of this device */
	len = acpi_device_path_fill(dev, buf, sizeof(buf), 0);
	if (len <= 0)
		return NULL;

	/* Ensure there is room for the added name, separator, and NUL */
	if ((len + strlen(name) + 2) > sizeof(buf))
		return NULL;
	snprintf(buf + len, sizeof(buf) - len, ".%s", name);

	return buf;
}

int acpi_device_status(const struct device *dev)
{
	if (!dev->enabled)
		return ACPI_STATUS_DEVICE_ALL_OFF;
	if (dev->hidden)
		return ACPI_STATUS_DEVICE_HIDDEN_ON;
	return ACPI_STATUS_DEVICE_ALL_ON;
}

/* Write the unique _UID based on ACPI device path. */
void acpi_device_write_uid(const struct device *dev)
{
	acpigen_write_name_integer("_UID", acpi_device_uid(dev));
}

/* ACPI 6.1 section 6.4.3.6: Extended Interrupt Descriptor */
void acpi_device_write_interrupt(const struct acpi_irq *irq)
{
	void *desc_length;
	uint8_t flags;

	if (!irq || !irq->pin)
		return;

	/* This is supported by GpioInt() but not Interrupt() */
	if (irq->polarity == ACPI_IRQ_ACTIVE_BOTH)
		return;

	/* Byte 0: Descriptor Type */
	acpigen_emit_byte(ACPI_DESCRIPTOR_INTERRUPT);

	/* Byte 1-2: Length (filled in later) */
	desc_length = acpi_device_write_zero_len();

	/*
	 * Byte 3: Flags
	 *  [7:5]: Reserved
	 *    [4]: Wake     (0=NO_WAKE   1=WAKE)
	 *    [3]: Sharing  (0=EXCLUSIVE 1=SHARED)
	 *    [2]: Polarity (0=HIGH      1=LOW)
	 *    [1]: Mode     (0=LEVEL     1=EDGE)
	 *    [0]: Resource (0=PRODUCER  1=CONSUMER)
	 */
	flags = 1 << 0; /* ResourceConsumer */
	if (irq->mode == ACPI_IRQ_EDGE_TRIGGERED)
		flags |= 1 << 1;
	if (irq->polarity == ACPI_IRQ_ACTIVE_LOW)
		flags |= 1 << 2;
	if (irq->shared == ACPI_IRQ_SHARED)
		flags |= 1 << 3;
	if (irq->wake == ACPI_IRQ_WAKE)
		flags |= 1 << 4;
	acpigen_emit_byte(flags);

	/* Byte 4: Interrupt Table Entry Count */
	acpigen_emit_byte(1);

	/* Byte 5-8: Interrupt Number */
	acpigen_emit_dword(irq->pin);

	/* Fill in Descriptor Length (account for len word) */
	acpi_device_fill_len(desc_length);
}

/* ACPI 6.1 section 6.4.3.8.1 - GPIO Interrupt or I/O */
void acpi_device_write_gpio(const struct acpi_gpio *gpio)
{
	void *start, *desc_length;
	void *pin_table_offset, *vendor_data_offset, *resource_offset;
	uint16_t flags = 0;
	int pin;

	if (!gpio || gpio->type > ACPI_GPIO_TYPE_IO)
		return;

	start = acpigen_get_current();

	/* Byte 0: Descriptor Type */
	acpigen_emit_byte(ACPI_DESCRIPTOR_GPIO);

	/* Byte 1-2: Length (fill in later) */
	desc_length = acpi_device_write_zero_len();

	/* Byte 3: Revision ID */
	acpigen_emit_byte(ACPI_GPIO_REVISION_ID);

	/* Byte 4: GpioIo or GpioInt */
	acpigen_emit_byte(gpio->type);

	/*
	 * Byte 5-6: General Flags
	 *   [15:1]: 0 => Reserved
	 *      [0]: 1 => ResourceConsumer
	 */
	acpigen_emit_word(1 << 0);

	switch (gpio->type) {
	case ACPI_GPIO_TYPE_INTERRUPT:
		/*
		 * Byte 7-8: GPIO Interrupt Flags
		 *   [15:5]: 0 => Reserved
		 *      [4]: Wake     (0=NO_WAKE   1=WAKE)
		 *      [3]: Sharing  (0=EXCLUSIVE 1=SHARED)
		 *    [2:1]: Polarity (0=HIGH      1=LOW     2=BOTH)
		 *      [0]: Mode     (0=LEVEL     1=EDGE)
		 */
		if (gpio->irq.mode == ACPI_IRQ_EDGE_TRIGGERED)
			flags |= 1 << 0;
		if (gpio->irq.shared == ACPI_IRQ_SHARED)
			flags |= 1 << 3;
		if (gpio->irq.wake == ACPI_IRQ_WAKE)
			flags |= 1 << 4;

		switch (gpio->irq.polarity) {
		case ACPI_IRQ_ACTIVE_HIGH:
			flags |= 0 << 1;
			break;
		case ACPI_IRQ_ACTIVE_LOW:
			flags |= 1 << 1;
			break;
		case ACPI_IRQ_ACTIVE_BOTH:
			flags |= 2 << 1;
			break;
		}
		break;

	case ACPI_GPIO_TYPE_IO:
		/*
		 * Byte 7-8: GPIO IO Flags
		 *   [15:4]: 0 => Reserved
		 *      [3]: Sharing  (0=EXCLUSIVE 1=SHARED)
		 *      [2]: 0 => Reserved
		 *    [1:0]: IO Restriction
		 *           0 => IoRestrictionNone
		 *           1 => IoRestrictionInputOnly
		 *           2 => IoRestrictionOutputOnly
		 *           3 => IoRestrictionNoneAndPreserve
		 */
		flags |= gpio->io_restrict & 3;
		if (gpio->io_shared)
			flags |= 1 << 3;
		break;
	}
	acpigen_emit_word(flags);

	/*
	 * Byte 9: Pin Configuration
	 *  0x01 => Default (no configuration applied)
	 *  0x02 => Pull-up
	 *  0x03 => Pull-down
	 *  0x04-0x7F => Reserved
	 *  0x80-0xff => Vendor defined
	 */
	acpigen_emit_byte(gpio->pull);

	/* Byte 10-11: Output Drive Strength in 1/100 mA */
	acpigen_emit_word(gpio->output_drive_strength);

	/* Byte 12-13: Debounce Timeout in 1/100 ms */
	acpigen_emit_word(gpio->interrupt_debounce_timeout);

	/* Byte 14-15: Pin Table Offset, relative to start */
	pin_table_offset = acpi_device_write_zero_len();

	/* Byte 16: Reserved */
	acpigen_emit_byte(0);

	/* Byte 17-18: Resource Source Name Offset, relative to start */
	resource_offset = acpi_device_write_zero_len();

	/* Byte 19-20: Vendor Data Offset, relative to start */
	vendor_data_offset = acpi_device_write_zero_len();

	/* Byte 21-22: Vendor Data Length */
	acpigen_emit_word(0);

	/* Fill in Pin Table Offset */
	acpi_device_fill_from_len(pin_table_offset, start);

	/* Pin Table, one word for each pin */
	for (pin = 0; pin < gpio->pin_count; pin++) {
		uint16_t acpi_pin = gpio->pins[pin];
#if CONFIG(GENERIC_GPIO_LIB)
		acpi_pin = gpio_acpi_pin(acpi_pin);
#endif
		acpigen_emit_word(acpi_pin);
	}

	/* Fill in Resource Source Name Offset */
	acpi_device_fill_from_len(resource_offset, start);

	/* Resource Source Name String */
#if CONFIG(GENERIC_GPIO_LIB)
	acpigen_emit_string(gpio->resource ? : gpio_acpi_path(gpio->pins[0]));
#else
	acpigen_emit_string(gpio->resource);
#endif

	/* Fill in Vendor Data Offset */
	acpi_device_fill_from_len(vendor_data_offset, start);

	/* Fill in GPIO Descriptor Length (account for len word) */
	acpi_device_fill_len(desc_length);
}

/* ACPI 6.1 section 6.4.3.8.2.1 - I2cSerialBus() */
void acpi_device_write_i2c(const struct acpi_i2c *i2c)
{
	void *desc_length, *type_length;

	/* Byte 0: Descriptor Type */
	acpigen_emit_byte(ACPI_DESCRIPTOR_SERIAL_BUS);

	/* Byte 1+2: Length (filled in later) */
	desc_length = acpi_device_write_zero_len();

	/* Byte 3: Revision ID */
	acpigen_emit_byte(ACPI_I2C_SERIAL_BUS_REVISION_ID);

	/* Byte 4: Resource Source Index is Reserved */
	acpigen_emit_byte(0);

	/* Byte 5: Serial Bus Type is I2C */
	acpigen_emit_byte(ACPI_SERIAL_BUS_TYPE_I2C);

	/*
	 * Byte 6: Flags
	 *  [7:2]: 0 => Reserved
	 *    [1]: 1 => ResourceConsumer
	 *    [0]: 0 => ControllerInitiated
	 */
	acpigen_emit_byte(1 << 1);

	/*
	 * Byte 7-8: Type Specific Flags
	 *   [15:1]: 0 => Reserved
	 *      [0]: 0 => 7bit, 1 => 10bit
	 */
	acpigen_emit_word(i2c->mode_10bit);

	/* Byte 9: Type Specific Revision ID */
	acpigen_emit_byte(ACPI_I2C_TYPE_SPECIFIC_REVISION_ID);

	/* Byte 10-11: I2C Type Data Length */
	type_length = acpi_device_write_zero_len();

	/* Byte 12-15: I2C Bus Speed */
	acpigen_emit_dword(i2c->speed);

	/* Byte 16-17: I2C Slave Address */
	acpigen_emit_word(i2c->address);

	/* Fill in Type Data Length */
	acpi_device_fill_len(type_length);

	/* Byte 18+: ResourceSource */
	acpigen_emit_string(i2c->resource);

	/* Fill in I2C Descriptor Length */
	acpi_device_fill_len(desc_length);
}

/* ACPI 6.1 section 6.4.3.8.2.2 - SpiSerialBus() */
void acpi_device_write_spi(const struct acpi_spi *spi)
{
	void *desc_length, *type_length;
	uint16_t flags = 0;

	/* Byte 0: Descriptor Type */
	acpigen_emit_byte(ACPI_DESCRIPTOR_SERIAL_BUS);

	/* Byte 1+2: Length (filled in later) */
	desc_length = acpi_device_write_zero_len();

	/* Byte 3: Revision ID */
	acpigen_emit_byte(ACPI_SPI_SERIAL_BUS_REVISION_ID);

	/* Byte 4: Resource Source Index is Reserved */
	acpigen_emit_byte(0);

	/* Byte 5: Serial Bus Type is SPI */
	acpigen_emit_byte(ACPI_SERIAL_BUS_TYPE_SPI);

	/*
	 * Byte 6: Flags
	 *  [7:2]: 0 => Reserved
	 *    [1]: 1 => ResourceConsumer
	 *    [0]: 0 => ControllerInitiated
	 */
	acpigen_emit_byte(1 << 1);

	/*
	 * Byte 7-8: Type Specific Flags
	 *   [15:2]: 0 => Reserved
	 *      [1]: 0 => ActiveLow, 1 => ActiveHigh
	 *      [0]: 0 => FourWire, 1 => ThreeWire
	 */
	if (spi->wire_mode == SPI_3_WIRE_MODE)
		flags |= 1 << 0;
	if (spi->device_select_polarity == SPI_POLARITY_HIGH)
		flags |= 1 << 1;
	acpigen_emit_word(flags);

	/* Byte 9: Type Specific Revision ID */
	acpigen_emit_byte(ACPI_SPI_TYPE_SPECIFIC_REVISION_ID);

	/* Byte 10-11: SPI Type Data Length */
	type_length = acpi_device_write_zero_len();

	/* Byte 12-15: Connection Speed */
	acpigen_emit_dword(spi->speed);

	/* Byte 16: Data Bit Length */
	acpigen_emit_byte(spi->data_bit_length);

	/* Byte 17: Clock Phase */
	acpigen_emit_byte(spi->clock_phase);

	/* Byte 18: Clock Polarity */
	acpigen_emit_byte(spi->clock_polarity);

	/* Byte 19-20: Device Selection */
	acpigen_emit_word(spi->device_select);

	/* Fill in Type Data Length */
	acpi_device_fill_len(type_length);

	/* Byte 21+: ResourceSource String */
	acpigen_emit_string(spi->resource);

	/* Fill in SPI Descriptor Length */
	acpi_device_fill_len(desc_length);
}

/* UART Serial Bus - UARTSerialBusV2() */
void acpi_device_write_uart(const struct acpi_uart *uart)
{
	void *desc_length, *type_length;
	uint16_t flags;

	/* Byte 0: Descriptor Type */
	acpigen_emit_byte(ACPI_DESCRIPTOR_SERIAL_BUS);

	/* Byte 1+2: Length (filled in later) */
	desc_length = acpi_device_write_zero_len();

	/* Byte 3: Revision ID */
	acpigen_emit_byte(ACPI_UART_SERIAL_BUS_REVISION_ID);

	/* Byte 4: Resource Source Index is Reserved */
	acpigen_emit_byte(0);

	/* Byte 5: Serial Bus Type is UART */
	acpigen_emit_byte(ACPI_SERIAL_BUS_TYPE_UART);

	/*
	 * Byte 6: Flags
	 *  [7:2]: 0 => Reserved
	 *    [1]: 1 => ResourceConsumer
	 *    [0]: 0 => ControllerInitiated
	 */
	acpigen_emit_byte(BIT(1));

	/*
	 * Byte 7-8: Type Specific Flags
	 *   [15:8]: 0 => Reserved
	 *      [7]: 0 => Little Endian, 1 => Big Endian
	 *    [6:4]: Data bits
	 *    [3:2]: Stop bits
	 *    [1:0]: Flow control
	 */
	flags = uart->flow_control & 3;
	flags |= (uart->stop_bits & 3) << 2;
	flags |= (uart->data_bits & 7) << 4;
	flags |= (uart->endian & 1) << 7;
	acpigen_emit_word(flags);

	/* Byte 9: Type Specific Revision ID */
	acpigen_emit_byte(ACPI_UART_TYPE_SPECIFIC_REVISION_ID);

	/* Byte 10-11: Type Data Length */
	type_length = acpi_device_write_zero_len();

	/* Byte 12-15: Initial Baud Rate */
	acpigen_emit_dword(uart->initial_baud_rate);

	/* Byte 16-17: RX FIFO size */
	acpigen_emit_word(uart->rx_fifo_bytes);

	/* Byte 18-19: TX FIFO size */
	acpigen_emit_word(uart->tx_fifo_bytes);

	/* Byte 20: Parity */
	acpigen_emit_byte(uart->parity);

	/* Byte 21: Lines Enabled */
	acpigen_emit_byte(uart->lines_in_use);

	/* Fill in Type Data Length */
	acpi_device_fill_len(type_length);

	/* Byte 22+: ResourceSource */
	acpigen_emit_string(uart->resource);

	/* Fill in Descriptor Length */
	acpi_device_fill_len(desc_length);
}

#define ACPI_POWER_RESOURCE_STATUS_ON_OP	ONE_OP
#define ACPI_POWER_RESOURCE_STATUS_OFF_OP	ZERO_OP

/**
 * Writes an ACPI fragment that will check the GPIO and return 0 if the GPIO
 * state does not match the active parameter.
 */
static void acpigen_write_gpio_STA(const struct acpi_gpio *gpio, bool active)
{
	if (!gpio || !gpio->pin_count)
		return;

	/* Read current GPIO status into Local0. */
	acpigen_get_tx_gpio(gpio);

	/*
	 * If (!Local0)
	 * {
	 *     Return (Zero)
	 * }
	 */
	acpigen_write_if();
	if (active)
		acpigen_emit_byte(LNOT_OP);
	acpigen_emit_byte(LOCAL0_OP);
	acpigen_write_return_op(ACPI_POWER_RESOURCE_STATUS_OFF_OP);
	acpigen_write_if_end();
}

static void acpigen_write_power_res_STA(const struct acpi_power_res_params *params)
{
	acpigen_write_method_serialized("_STA", 0);

	/* Verify all the GPIOs are in the ON state, otherwise return 0 */
	acpigen_write_gpio_STA(params->enable_gpio, true);
	acpigen_write_gpio_STA(params->reset_gpio, false);
	acpigen_write_gpio_STA(params->stop_gpio, false);

	/* All GPIOs are in the ON state */
	acpigen_write_return_op(ACPI_POWER_RESOURCE_STATUS_ON_OP);

	acpigen_pop_len(); /* Method */
}

/* PowerResource() with Enable and/or Reset control */
void acpi_device_add_power_res(const struct acpi_power_res_params *params)
{
	static uint8_t id;
	static const char * const power_res_dev_states[] = { "_PR0", "_PR3" };
	unsigned int reset_gpio = params->reset_gpio ? params->reset_gpio->pins[0] : 0;
	unsigned int enable_gpio = params->enable_gpio ? params->enable_gpio->pins[0] : 0;
	unsigned int stop_gpio = params->stop_gpio ? params->stop_gpio->pins[0] : 0;
	char pr_name[ACPI_NAME_BUFFER_SIZE];

	if (!reset_gpio && !enable_gpio && !stop_gpio)
		return;

	snprintf(pr_name, sizeof(pr_name), "PR%02X", id++);

	/* PowerResource (PR##, 0, 0) */
	acpigen_write_power_res(pr_name, 0, 0, power_res_dev_states,
				ARRAY_SIZE(power_res_dev_states));

	if (params->use_gpio_for_status) {
		acpigen_write_power_res_STA(params);
	} else {
		/* Method (_STA, 0, NotSerialized) { Return (0x1) } */
		acpigen_write_STA(ACPI_POWER_RESOURCE_STATUS_ON_OP);
	}

	/* Method (_ON, 0, Serialized) */
	acpigen_write_method_serialized("_ON", 0);
	/* Call _STA and early return if the device is already enabled, since the Linux
	   kernel doesn't check the device status before calling _ON. This avoids
	   unnecessary delays while booting. */
	if (params->use_gpio_for_status) {
		/* Local0 = _STA () */
		acpigen_write_store();
		acpigen_emit_namestring("_STA");
		acpigen_emit_byte(LOCAL0_OP);
		/* If (( Local0 == ACPI_POWER_RESOURCE_STATUS_ON_OP)) */
		acpigen_write_if_lequal_op_op(LOCAL0_OP, ACPI_POWER_RESOURCE_STATUS_ON_OP);
		acpigen_write_return_op(ZERO_OP);
		acpigen_write_if_end();
	}
	if (reset_gpio)
		acpigen_enable_tx_gpio(params->reset_gpio);
	if (enable_gpio) {
		acpigen_enable_tx_gpio(params->enable_gpio);
		if (params->enable_delay_ms)
			acpigen_write_sleep(params->enable_delay_ms);
	}
	if (reset_gpio) {
		acpigen_disable_tx_gpio(params->reset_gpio);
		if (params->reset_delay_ms)
			acpigen_write_sleep(params->reset_delay_ms);
	}
	if (stop_gpio) {
		acpigen_disable_tx_gpio(params->stop_gpio);
		if (params->stop_delay_ms)
			acpigen_write_sleep(params->stop_delay_ms);
	}
	acpigen_pop_len();		/* _ON method */

	/* Method (_OFF, 0, Serialized) */
	acpigen_write_method_serialized("_OFF", 0);
	if (stop_gpio) {
		acpigen_enable_tx_gpio(params->stop_gpio);
		if (params->stop_off_delay_ms)
			acpigen_write_sleep(params->stop_off_delay_ms);
	}
	if (reset_gpio) {
		acpigen_enable_tx_gpio(params->reset_gpio);
		if (params->reset_off_delay_ms)
			acpigen_write_sleep(params->reset_off_delay_ms);
	}
	if (enable_gpio) {
		acpigen_disable_tx_gpio(params->enable_gpio);
		if (params->enable_off_delay_ms)
			acpigen_write_sleep(params->enable_off_delay_ms);
	}
	acpigen_pop_len();		/* _OFF method */

	acpigen_pop_len();		/* PowerResource PR## */
}

static void acpi_dp_write_array(const struct acpi_dp *array);
static void acpi_dp_write_value(const struct acpi_dp *prop)
{
	switch (prop->type) {
	case ACPI_DP_TYPE_INTEGER:
		acpigen_write_integer(prop->integer);
		break;
	case ACPI_DP_TYPE_STRING:
	case ACPI_DP_TYPE_CHILD:
		acpigen_write_string(prop->string);
		break;
	case ACPI_DP_TYPE_REFERENCE:
		acpigen_emit_namestring(prop->string);
		break;
	case ACPI_DP_TYPE_ARRAY:
		acpi_dp_write_array(prop->array);
		break;
	default:
		break;
	}
}

/* Package (2) { "prop->name", VALUE } */
static void acpi_dp_write_property(const struct acpi_dp *prop)
{
	acpigen_write_package(2);
	acpigen_write_string(prop->name);
	acpi_dp_write_value(prop);
	acpigen_pop_len();
}

/* Write array of Device Properties */
static void acpi_dp_write_array(const struct acpi_dp *array)
{
	const struct acpi_dp *dp;
	char *pkg_count;

	/* Package element count determined as it is populated */
	pkg_count = acpigen_write_package(0);

	/*
	 * Only acpi_dp of type DP_TYPE_TABLE is allowed to be an array.
	 * DP_TYPE_TABLE does not have a value to be written. Thus, start
	 * the loop from next type in the array.
	 */
	for (dp = array->next; dp; dp = dp->next) {
		acpi_dp_write_value(dp);
		(*pkg_count)++;
	}

	acpigen_pop_len();
}

static void acpi_dp_free(struct acpi_dp *dp)
{
	while (dp) {
		struct acpi_dp *p = dp->next;

		switch (dp->type) {
		case ACPI_DP_TYPE_CHILD:
			acpi_dp_free(dp->child);
			break;
		case ACPI_DP_TYPE_ARRAY:
			acpi_dp_free(dp->array);
			break;
		default:
			break;
		}

		free(dp);
		dp = p;
	}
}

static bool acpi_dp_write_properties(struct acpi_dp *prop, const char *uuid)
{
	struct acpi_dp *dp;
	char *prop_count = NULL;

	/* Print base properties */
	for (dp = prop; dp; dp = dp->next) {
		if (dp->type == ACPI_DP_TYPE_TABLE ||
		    dp->type == ACPI_DP_TYPE_CHILD ||
		    dp->type == ACPI_DP_TYPE_PACKAGE)
			continue;

		/*
		 * The UUID and package is only added when
		 * we come across the first property.  This
		 * is to avoid creating a zero-length package
		 * in situations where there are only children.
		 */
		if (!prop_count) {
			/* ToUUID (dp->uuid) */
			acpigen_write_uuid(uuid);
			/*
			 * Package (PROP), element count determined as
			 * it is populated
			 */
			prop_count = acpigen_write_package(0);
		}
		(*prop_count)++;
		acpi_dp_write_property(dp);
	}
	if (prop_count) {
		/* Package (PROP) length, if a package was written */
		acpigen_pop_len();
		return true;
	}
	return false;
}

static void acpi_dp_write_(struct acpi_dp *table)
{
	struct acpi_dp *dp, *prop;
	char *dp_count;
	int child_count = 0;

	if (!table || table->type != ACPI_DP_TYPE_TABLE || !table->next)
		return;

	/* Name (name) */
	acpigen_write_name(table->name);

	/* Device Property list starts with the next entry */
	prop = table->next;

	/* Package (DP), default to assuming no properties or children */
	dp_count = acpigen_write_package(0);

	/* Print base properties */
	if (acpi_dp_write_properties(prop, table->uuid))
		*dp_count += 2;

	/* Count child properties */
	for (dp = prop; dp; dp = dp->next)
		if (dp->type == ACPI_DP_TYPE_CHILD)
			child_count++;

	/* Add child properties to the base table */
	if (child_count) {
		/* Update DP package count */
		*dp_count += 2;
		/* ToUUID (ACPI_DP_CHILD_UUID) */
		acpigen_write_uuid(ACPI_DP_CHILD_UUID);

		/* Print child pointer properties */
		acpigen_write_package(child_count);

		for (dp = prop; dp; dp = dp->next)
			if (dp->type == ACPI_DP_TYPE_CHILD)
				acpi_dp_write_property(dp);
		/* Package (CHILD) length */
		acpigen_pop_len();
	}

	/* Write packages of properties with unique UUID */
	for (dp = prop; dp; dp = dp->next)
		if (dp->type == ACPI_DP_TYPE_PACKAGE)
			if (acpi_dp_write_properties(dp->child, dp->uuid))
				*dp_count += 2;

	/* Package (DP) length */
	acpigen_pop_len();

	/* Recursively parse children into separate tables */
	for (dp = prop; dp; dp = dp->next)
		if (dp->type == ACPI_DP_TYPE_CHILD)
			acpi_dp_write_(dp->child);
}

void acpi_dp_write(struct acpi_dp *table)
{
	acpi_dp_write_(table);

	/* Clean up */
	acpi_dp_free(table);
}

static struct acpi_dp *acpi_dp_new(struct acpi_dp *dp, enum acpi_dp_type type,
				   const char *name)
{
	struct acpi_dp *new;

	new = malloc(sizeof(struct acpi_dp));
	if (!new)
		return NULL;

	memset(new, 0, sizeof(*new));
	new->type = type;
	new->name = name;
	new->uuid = ACPI_DP_UUID;

	if (dp) {
		/* Add to end of property list */
		while (dp->next)
			dp = dp->next;
		dp->next = new;
	}

	return new;
}

struct acpi_dp *acpi_dp_new_table(const char *name)
{
	return acpi_dp_new(NULL, ACPI_DP_TYPE_TABLE, name);
}

size_t acpi_dp_add_property_list(struct acpi_dp *dp,
				 const struct acpi_dp *property_list,
				 size_t property_count)
{
	const struct acpi_dp *prop;
	size_t i, properties_added = 0;

	if (!dp || !property_list)
		return 0;

	for (i = 0; i < property_count; i++) {
		prop = &property_list[i];

		if (prop->type == ACPI_DP_TYPE_UNKNOWN || !prop->name)
			continue;

		switch (prop->type) {
		case ACPI_DP_TYPE_INTEGER:
			acpi_dp_add_integer(dp, prop->name, prop->integer);
			break;
		case ACPI_DP_TYPE_STRING:
			acpi_dp_add_string(dp, prop->name, prop->string);
			break;
		case ACPI_DP_TYPE_REFERENCE:
			acpi_dp_add_reference(dp, prop->name, prop->string);
			break;
		case ACPI_DP_TYPE_ARRAY:
			acpi_dp_add_array(dp, prop->array);
			break;
		case ACPI_DP_TYPE_CHILD:
			acpi_dp_add_child(dp, prop->name, prop->child);
			break;
		default:
			continue;
		}

		++properties_added;
	}

	return properties_added;
}

struct acpi_dp *acpi_dp_add_integer(struct acpi_dp *dp, const char *name,
				    uint64_t value)
{
	if (!dp)
		return NULL;

	struct acpi_dp *new = acpi_dp_new(dp, ACPI_DP_TYPE_INTEGER, name);

	if (new)
		new->integer = value;

	return new;
}

struct acpi_dp *acpi_dp_add_string(struct acpi_dp *dp, const char *name,
				   const char *string)
{
	if (!dp)
		return NULL;

	struct acpi_dp *new = acpi_dp_new(dp, ACPI_DP_TYPE_STRING, name);

	if (new)
		new->string = string;

	return new;
}

struct acpi_dp *acpi_dp_add_reference(struct acpi_dp *dp, const char *name,
				      const char *reference)
{
	if (!dp)
		return NULL;

	struct acpi_dp *new = acpi_dp_new(dp, ACPI_DP_TYPE_REFERENCE, name);

	if (new)
		new->string = reference;

	return new;
}

struct acpi_dp *acpi_dp_add_child(struct acpi_dp *dp, const char *name,
				  struct acpi_dp *child)
{
	struct acpi_dp *new;

	if (!dp || !child || child->type != ACPI_DP_TYPE_TABLE)
		return NULL;

	new = acpi_dp_new(dp, ACPI_DP_TYPE_CHILD, name);
	if (new) {
		new->child = child;
		new->string = child->name;
	}

	return new;
}

struct acpi_dp *acpi_dp_add_package(struct acpi_dp *dp, struct acpi_dp *package)
{
	struct acpi_dp *new;

	if (!dp || !package || package->type != ACPI_DP_TYPE_TABLE)
		return NULL;

	new = acpi_dp_new(dp, ACPI_DP_TYPE_PACKAGE, NULL);
	if (new) {
		new->uuid = package->name;
		new->child = package;
	}

	return new;
}

struct acpi_dp *acpi_dp_add_array(struct acpi_dp *dp, struct acpi_dp *array)
{
	struct acpi_dp *new;

	if (!dp || !array || array->type != ACPI_DP_TYPE_TABLE)
		return NULL;

	new = acpi_dp_new(dp, ACPI_DP_TYPE_ARRAY, array->name);
	if (new)
		new->array = array;

	return new;
}

struct acpi_dp *acpi_dp_add_integer_array(struct acpi_dp *dp, const char *name,
					  const uint64_t *array, int len)
{
	struct acpi_dp *dp_array;
	int i;

	if (!dp || len <= 0)
		return NULL;

	dp_array = acpi_dp_new_table(name);
	if (!dp_array)
		return NULL;

	for (i = 0; i < len; i++)
		if (!acpi_dp_add_integer(dp_array, NULL, array[i]))
			break;

	acpi_dp_add_array(dp, dp_array);

	return dp_array;
}

struct acpi_dp *acpi_dp_add_gpio_array(struct acpi_dp *dp, const char *name,
				       const struct acpi_gpio_res_params *params,
				       size_t param_count)
{
	struct acpi_dp *gpio;
	uint32_t i;

	if (!dp || !param_count)
		return NULL;

	gpio = acpi_dp_new_table(name);
	if (!gpio)
		return NULL;

	/*
	 * Generate ACPI identifiers as follows:
	 * Package () {
	 *     name,           // e.g. cs-gpios
	 *     Package() {
	 *           ref, index, pin, active_low, // GPIO-0 (params[0])
	 *           ref, index, pin, active_low, // GPIO-1 (params[1])
	 *           ...
	 *     }
	 * }
	 */
	for (i = 0; i < param_count; i++, params++) {
		/*
		 * If refs is NULL, leave a hole in the gpio array. This can be used in
		 * conditions where some controllers use both GPIOs and native signals.
		 */
		if (!params->ref) {
			acpi_dp_add_integer(gpio, NULL, 0);
			continue;
		}

		/* The device that has _CRS containing GpioIO()/GpioInt() */
		acpi_dp_add_reference(gpio, NULL, params->ref);

		/* Index of the GPIO resource in _CRS starting from zero */
		acpi_dp_add_integer(gpio, NULL, params->index);

		/* Pin in the GPIO resource, typically zero */
		acpi_dp_add_integer(gpio, NULL, params->pin);

		/* Set if pin is active low */
		acpi_dp_add_integer(gpio, NULL, params->active_low);
	}
	acpi_dp_add_array(dp, gpio);

	return gpio;
}


struct acpi_dp *acpi_dp_add_gpio(struct acpi_dp *dp, const char *name,
				 const char *ref, int index, int pin,
				 int active_low)
{
	struct acpi_gpio_res_params param = {
		.ref = ref,
		.index = index,
		.pin = pin,
		.active_low = active_low,
	};

	return acpi_dp_add_gpio_array(dp, name, &param, 1);
}

/*
 * This function writes a PCI device with _ADR object:
 * Example:
 * Scope (\_SB.PCI0)
 * {
 *    Device (IGFX)
 *    {
 *       Name (_ADR, 0x0000000000000000)
 *       Method (_STA, 0, NotSerialized) { Return (status) }
 *    }
 * }
 */
void acpi_device_write_pci_dev(const struct device *dev)
{
	const char *scope = acpi_device_scope(dev);
	const char *name = acpi_device_name(dev);

	assert(dev->path.type == DEVICE_PATH_PCI);
	assert(name);
	assert(scope);

	acpigen_write_scope(scope);
	acpigen_write_device(name);

	acpigen_write_ADR_pci_device(dev);
	acpigen_write_STA(acpi_device_status(dev));

	acpigen_pop_len(); /* Device */
	acpigen_pop_len(); /* Scope */
}

/*
 * Helper function to add given integer property with an UUID to _DSD in the current scope.
 *
 * dsd   - Pointer to a _DSD object.
 *         Append to existing _DSD object if not NULL.
 *         Create new _DSD object and flush it if NULL.
 * uuid  - Pointer to the UUID string.
 * name  - Pointer to the property name string.
 * value - Value of the integer property.
 */
static void acpi_device_add_integer_property_with_uuid(struct acpi_dp *dsd,
						const char *uuid,
						const char *name,
						uint64_t value)
{
	struct acpi_dp *prev_dsd = dsd, *pkg;
	if (prev_dsd == NULL)
		dsd = acpi_dp_new_table("_DSD");
	pkg = acpi_dp_new_table(uuid);
	acpi_dp_add_integer(pkg, name, value);
	acpi_dp_add_package(dsd, pkg);
	if (prev_dsd == NULL)
		acpi_dp_write(dsd);
}

/* _DSD with ExternalFacingPort */
void acpi_device_add_external_facing_port(struct acpi_dp *dsd)
{
	acpi_device_add_integer_property_with_uuid(dsd,
						ACPI_DSD_EXTERNAL_FACING_PORT_UUID,
						ACPI_DSD_EXTERNAL_FACING_PORT_NAME,
						1);
}

/* _DSD with HotPlugSupportInD3 */
void acpi_device_add_hotplug_support_in_d3(struct acpi_dp *dsd)
{
	acpi_device_add_integer_property_with_uuid(dsd,
						ACPI_DSD_HOTPLUG_IN_D3_UUID,
						ACPI_DSD_HOTPLUG_IN_D3_NAME,
						1);
}

/* _DSD with DmaProperty */
void acpi_device_add_dma_property(struct acpi_dp *dsd)
{
	acpi_device_add_integer_property_with_uuid(dsd,
						ACPI_DSD_DMA_PROPERTY_UUID,
						ACPI_DSD_DMA_PROPERTY_NAME,
						1);
}

/* _DSD with StorageD3Enable */
void acpi_device_add_storage_d3_enable(struct acpi_dp *dsd)
{
	acpi_device_add_integer_property_with_uuid(dsd,
						ACPI_DSD_STORAGE_D3_UUID,
						ACPI_DSD_STORAGE_D3_NAME,
						1);
}