blob: d07f1118a8235697e4cbf25facbbac72ce28e2bf (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
|
# Squared
## Overview
### Top
![][overview_top]
### Bottom
![][overview_bottom]
* **Legend**
* [BLUE][header_cn16_link]: UART0 / USB connector
* [GREEN][header_gpio_link]: UART1 / GPIO header
* [RED][header_cn22_link]: SPI header
* YELLOW: Indicates pin 1
## Mainboard components
### Platform
```eval_rst
+------------------+----------------------------------+
| CPU | Intel Atom, Celeron, Pentium |
+------------------+----------------------------------+
| PCH | Intel Apollo Lake |
+------------------+----------------------------------+
| EC / Super IO | N/A |
+------------------+----------------------------------+
| Coprocessor | Intel TXE 3.0 |
+------------------+----------------------------------+
```
### Flash chip
```eval_rst
+---------------------+------------+
| Type | Value |
+=====================+============+
| Socketed flash | no |
+---------------------+------------+
| Vendor | Winbond |
+---------------------+------------+
| Model | W25Q128FW |
+---------------------+------------+
| Voltage | 1.8V |
+---------------------+------------+
| Size | 16 MiB |
+---------------------+------------+
| Package | SOIC-8 |
+---------------------+------------+
| Write protection | No |
+---------------------+------------+
| Internal flashing | No |
+---------------------+------------+
| In curcuit flashing | Yes |
+---------------------+------------+
```
### Debugging
#### UART0 (CN16)
This connector is located on the **bottom** side (see [here][overview_bottom_link]).
![][header_cn16]
#### UART1 (GPIO header)
The GPIO header is located on the **bottom** side (see [here][overview_bottom_link]).
![][header_gpio]
## Building and flashing coreboot
### Using the SPI header
The SPI header is located on the **bottom** side (see [here][overview_bottom_link]).
![][header_cn22]
### Preperations
In order to build coreboot, it's neccessary to extract some files from the vendor firmware. Make sure that you have a fully working dump.
```bash
[upsquared]$ ls
firmware_vendor.rom
```
```bash
[upsquared]$ mkdir extracted && cd extracted
[extracted]$ ifdtool -x ../firmware_vendor.rom
File ../firmware_vendor.rom is 16777216 bytes
Peculiar firmware descriptor, assuming Ibex Peak compatibility.
Flash Region 0 (Flash Descriptor): 00000000 - 00000fff
Flash Region 1 (BIOS): 00001000 - 00efefff
Flash Region 2 (Intel ME): 07fff000 - 00000fff (unused)
Flash Region 3 (GbE): 07fff000 - 00000fff (unused)
Flash Region 4 (Platform Data): 07fff000 - 00000fff (unused)
Flash Region 5 (Reserved): 00eff000 - 00ffefff
Flash Region 6 (Reserved): 07fff000 - 00000fff (unused)
Flash Region 7 (Reserved): 07fff000 - 00000fff (unused)
Flash Region 8 (EC): 07fff000 - 00000fff (unused)
```
```bash
flashregion_0_flashdescriptor.bin
flashregion_1_bios.bin
flashregion_5_reserved.bin
```
### Clean up
```bash
[coreboot]$ make distclean
```
### Configuring
```bash
[coreboot]$ touch .config
[coreboot]$ ./util/scripts/config --enable VENDOR_UP
[coreboot]$ ./util/scripts/config --enable BOARD_UP_SQUARED
[coreboot]$ ./util/scripts/config --enable NEED_IFWI
[coreboot]$ ./util/scripts/config --enable HAVE_IFD_BIN
[coreboot]$ ./util/scripts/config --set-str IFWI_FILE_NAME "<flashregion_1_bios.bin>"
[coreboot]$ ./util/scripts/config --set-str IFD_BIN_PATH "<flashregion_0_flashdescriptor.bin>"
[coreboot]$ make olddefconfig
```
### Building
```bash
[coreboot]$ make
```
Now you should have a working and ready to use coreboot build at `build/coreboot.rom`.
### Flashing
```bash
[coreboot]$ flashrom -p <your_programmer> -w build/coreboot.rom
```
## Board status
### Working
- bootblock, romstage, ramstage
- Serial console UART0, UART1
- SPI flash console
- iGPU init with libgfxinit
- LAN1, LAN2
- USB2, USB3
- HDMI, DisplayPort
- eMMC
- flashing with flashrom externally
### Work in progress
- Documentation
- ACPI
### Not working / Known issues
- Generally SeaBIOS works, but it can't find the CBFS region and therefore it can't load seavgabios. This is because of changes at the Apollolake platform.
### Untested
- GPIO pin header
- 60 pin EXHAT
- Camera interface
- MIPI-CSI2 2-lane (2MP)
- MIPI-CSI2 4-lane (8MP)
- SATA3
- USB3 OTG
- embedded DisplayPort
- M.2 slot
- mini PCIe
- flashing with flashrom internally using Linux
[header_cn16]: header_cn16_10pin_uart0.svg
[header_cn16_link]: #uart0-cn16
[header_cn22]: header_cn22_12pin_spi.svg
[header_cn22_link]: #using-the-spi-header
[header_gpio]: header_40pin_gpio_uart1.svg
[header_gpio_link]: #uart1-gpio-header
[overview_top]: top.jpg
[overview_bottom]: bottom.jpg
[overview_bottom_link]: #bottom
|
