blob: 6db8cefef08464f453e0dc8a3b424413931252a1 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
|
# QEMU AArch64 emulator
This page describes how to build and run coreboot for QEMU/AArch64.
You can use LinuxBoot via `make menuconfig` or an arbitrary FIT image
as a payload for QEMU/AArch64.
## Running coreboot in QEMU
```bash
qemu-system-aarch64 -bios ./build/coreboot.rom \
-M virt,secure=on,virtualization=on -cpu cortex-a53 \
-nographic -m 8192M
```
- The default CPU in QEMU for AArch64 is a cortex-a15 which is 32-bit
ARM CPU. You need to specify 64-bit ARM CPU via `-cpu cortex-a53`.
- The default privilege level in QEMU for AArch64 is EL1 that we can't
have the right to access EL3/EL2 registers. You need to enable EL3/EL2
via `-machine secure=on,virtualization=on`.
- You need to specify the size of memory more than 544 MiB because 512
MiB is reserved for the kernel.
- The maximum size of memory is 255GiB (-m 261120).
## Building coreboot with an arbitrary FIT payload
There are 3 steps to make coreboot.rom for QEMU/AArch64. If you select
LinuxBoot, step 2 and 3 have done by LinuxBoot.
1. Get a DTB (Device Tree Blob)
2. Build a FIT image with a DTB
3. Add a FIT image to coreboot.rom
### 1. Get a DTB
You can get the DTB from QEMU with the following command.
```
$ qemu-system-aarch64 \
-M virt,dumpdtb=virt.dtb,secure=on,virtualization=on \
-cpu cortex-a53 -nographic -m 8192M
```
### 2. Build a FIT image with a DTB
You need to write an image source file that has an `.its` extension to
configure kernels, ramdisks, and DTBs.
See [Flattened uImage Tree documentation](../../lib/payloads/fit.md) for more details.
### 3. Add a FIT image to coreboot.rom
You can use cbfstool to add the payload you created in step 2 to
the coreboot.rom.
```
$ ./build/cbfstool ./build/coreboot.rom add -f <path-to-a-payload>/uImage \
-n fallback/payload -t fit -c lzma
```
|
