| Age | Commit message (Collapse) | Author |
|---|
|
Leaving the user as coreboot caused the entrypoint to run as coreboot,
which means we couldn't mount directories or run sshd correctly.
Switching to root at the end of the file fixes this.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ie10e1d7ad4def0faafe3bcd580a77e23c3bfe948
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79067
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Some boards (e.g. prodrive/hermes) that do not provide their own FMAP
and therefore have been generated by the build system (+ ifdtool)
experience a failure when trying to build with an IFD that contains
regions which do not have equivalent fmap names (set to NULL).
Therefore add a NULL check for the fmapname and ignore the region if we
do not have an fmapname.
Test: compile prodrive/hermes
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: Ib4589b7fdbd11d644214ca5601536e9aeb26882f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79010
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
To see which Kconfig symbols are actually used, and to verify that
they're used correctly, kconfig_lint scans the C code. It gives an error
if it sees a CONFIG(symbol) where the symbol doesn't exist.
This creates a problem when a C preprocessor macro is created to match
multiple Kconfig symbols. The simple solution here is to just ignore
those C preprocessor macro definitions as beyond the scope of this
linter.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I5a20e8bb5a3e19e380802cba712d6dd3ff2f4dc0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78681
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Instead of installing the pip modules system-wide, and possibly causing
conflicts, install them into a virtual environment for the coreboot
user.
If we wanted to, in the future, we could install different versions of
the modules into different virtual environment directories to allow
for testing or anything else we needed.
Change-Id: I49c749a13a698bfb7af29bf07e42ac14b67b2ae7
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79006
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
The branch for the encapsulate tool accidentally got caught up in the
switch from master to main. The default branch for this tool has not
changed, so still needs to be referenced as master.
Change-Id: I0ff47308dcbf30888e4e88637bab63f20467307a
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79005
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
The builds from the configs directory were not being saved in the
junit.xml files that Jenkins uses to determine pass vs fail of the
individual builds.
This also fixes the path to a log file that I noticed while testing.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I37dbee676cc9e507e612ce66994a04aba062757a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78863
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The latest updates to Vboot use libnss, so add the library to the
coreboot sdk.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Iee0c44296b189b5327ef8f950b1bba9eb668f298
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78867
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
gnatgcc is deprecated and in recent GCC releases its purpose is
fulfilled by the gcc binary. In case of a deprecated gnatgcc version is
installed, it doesn't provide the expected output and hostcc_has_gnat1()
fails. In this case, just set the value of CC to gcc.
It's still required to install GNAT in addition to GCC.
Change-Id: I730bdfda81268d10bd2a41ef5cb4e3810b76a42c
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78215
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Somehow two words slipped in here where the "bad" and "good" spellings
are the same, which doesn't make sense. Remove them.
Change-Id: I9b53ce8538616c164efb4eb25ff859975ddadfd2
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78822
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
This was reverted via commit 9ab3a1fe4a1d and causes unapply to fail
so we adjust the patch to preserve the original return value.
Change-Id: I5ad2180854e0263d2d097b059cb16ec478b859c5
Signed-off-by: Richard Marko <srk@48.io>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78442
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I0c47a603cc6e6174cd4895ff9f44b5bc242c653e
Signed-off-by: Richard Marko <srk@48.io>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78441
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Adds commit 48ad5c23680c util/kconfig: chmod +w before savedefconfig
to quilt patch series.
Change-Id: I381dce2fee995227efc60169fd90ab505c99b74b
Signed-off-by: Richard Marko <srk@48.io>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78440
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This prevents a headscratcher when .config in root doesn't have a write
permission bit set which causes a build failure of savedefconfig
not able to write to copied file, for example
*** Error while saving defconfig to:
build/mainboard/emulation/qemu-i440fx/cbfs-file.eU5E0t.out.tmp2
Change-Id: I2e7d35c9f6e8add3e7438d163850bc5fda5a99b2
Signed-off-by: Richard Marko <srk@48.io>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78415
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
In the unlikely but possible event where the name of the CBFS file is
longer than 232 characters, `cbfs_create_file_header()' would overflow
the buffer it allocated when it copies the CBFS filename.
Change-Id: If1825b5af21f7a20ce2a7ccb2d45b195c2fb67b0
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78500
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
The flag activates some Win32 compatibility quirks and on
clang/openbsd it enables so many of them that the code doesn't compile
anymore. Therefore move it into the "Win32 area" in that Makefile.
Change-Id: Ic77c04941e40a568f1d74cec09eb3d22a66e69b0
Signed-off-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78724
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I97756f603e304c6b50387ba2aaac416ae31db681
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78493
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
The linker can make relocation entries of a symbol which has a value
of zero point to the undefined symbol entry. It is permitted since
when the symbol value is zero as the documentation of the relocation
entry `r_info' field states:
"If the index is STN_UNDEF, the undefined symbol index, the relocation
uses 0 as the symbol value."
The ELF binary does not really have any missing symbols. It is an
optimization as the symbol points to the undefined symbol because its
value is zero.
A typical way to hit this cbfstool limitation is to define an empty
region using the REGION macro in the linker script. Here is an
example if we assume `CONFIG_MY_REGION' is set to 0:
.car.data {
[...]
REGION(my_region, CONFIG_MY_REGION_SIZE)
[...]
}
A region is defined as follow:
#define REGION_SIZE(name) ((size_t)_##name##_size)
#define DECLARE_REGION(name) \
extern u8 _##name[]; \
extern u8 _e##name[]; \
extern u8 _##name##_size[];
So the size of the region is actually the address of the
`_##name##_size' symbol. Therefore, the `_my_region_size' symbol
address is zero and the linker can make the relocation entry of this
symbol point to the undefined symbol index.
In such a situation, cbfstool hits a segmentation fault when it
attempts to relocate the symbol in `parse_elf_to_xip_stage()'
function. We resolves this issue by making cbfstool skips relocation
entries pointing to the undefined symbol similarly to the way it skips
relocation relative to absolute symbols. A symbol which value is zero
can be considered an absolute symbol and therefore should not be
relocated.
Of course, we could argue that we could just prevent the declaration
of an empty region as illustrated in the following example:
.car.data {
[...]
#if CONFIG_MY_REGION_SIZE > 0
REGION(my_region, CONFIG_MY_REGION_SIZE)
#endif
[...]
}
However, this is not a satisfying solution because:
1. It requires to add unnecessary code in the linker script as an empty
region is a valid declaration. Such a workaround requires the code
using it to mark the region symbols as weak symbols to handle the
situation where the region is not defined.
2. There could be other situations which have yet to be uncovered which
would lead the same cbfstool crash.
3. A binary with an empty region is a valid ELF file and cbfstool
should not crash when it is asked to create an eXecute-In-Place stage
out of it.
Change-Id: I2803fd3e96e7ff7a0b22d72d50bfbce7acaeb941
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77699
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
XFS is barely used. In order to save some space, drop it from the
package list.
Change-Id: Ic1cc567eb3f555bdf5567f3d036c84ce58691128
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78400
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Bump to 23.05 and also rename settings in order to compliant with newest
namespaces and names.
Change-Id: I4a23466bef5c45ebb82d92038ec2595103c984d3
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78399
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
This script lists all new commits from users with few merged commits.
By default, it looks at the last week, and considers anyone with fewer
than 5 commits merged to be a new user.
Currently the only command line argument that's accepted is the gerrit
username of the person running the query. To modify any of the other
options, the values hard-coded into the script need to be updated.
To keep down the number of repeated queries, the script saves lists of
users considered to be experienced, as well as the commits from new
users that it lists.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ic698798f3fddc77900c8c4e6f8427991bda3f2d1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78184
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nicholas Chin <nic.c3.14@gmail.com>
|
|
Check for pkg-config presence and fail out with actionable message.
BUG=b:302521446
TEST=Build successfully with working pkg-config and failed build with no
pkg-config
Change-Id: I5d604145c919e7f71680d1e095dc68cb21868319
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78191
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
The `SDK_VERSION` was incorrectly set to itself instead of keeping the
`COREBOOT_IMAGE_TAG` variable, leaving it as an empty string.
Test: Run `make coreboot-sdk` and see `SDK_VERSION` matches the tag.
Fixes: d3a89cdb749a ("util/docker: Replace use of sed with build args")
Change-Id: I4c8be7d0f7c1ac82da397e720d13a7075f22ec4d
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78141
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Since commit 9b186e0ffef4 ("util/xcompile: Add NASM to xcompile") NASM
from the coreboot toolchain is properly hooked up to the build system.
So it's not needed to install the distro package. Remove it.
Change-Id: I2ab0317531e25ae6d5baa8be8ac4d41dc145658f
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77728
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Support generating Jasper Lake GPIO configuration from inteltool logs
Change-Id: I519d27e0c91c8d9159224d9bc1c6e49c83270b7a
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78093
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maxim <max.senia.poliak@gmail.com>
|
|
Revise the Makefile.inc rules for generating FMD parser files.
- lex: If --header-file is supported then the lex (usually flex) should
also support '-o' so we don't need to do redirection (-t).
- yacc: Bison is already required by bincfg and sconfig so we
can change the default parser compiler to Bison. That also
allows us to use -o and --defines to override the output files.
- both: Line directives are only helpful when debugging the scanner and
the parser, so we should remove them to get better git diff
results (-L for lex, -l for bison).
Also regenerated the shipped files with latest version of flex (2.6.4)
and bison (3.8.2).
Change-Id: I15b58ff65dcd9f3f3a6095aa004091ff733ffec3
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75851
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
The mapped windows is up to 16M. Even if the flash size is 32MB, it is
not mapped at 0xFE000000.
So using "0xFFFFFFFF - rom_size + 1" to get the "rom_base_address" can
only explain well when rom_size is less or equal to 16MB. For larger
size, it is not physically correct (Even though it can get expected
result).
If the flash size is larger than 16M, we assume the given addresses
are already relative ones. So we don't need the physical base address
any more.
This commit is part of a series of patches to support 32/64M flash.
BUG=b:255374782
Change-Id: I9eea45f0be45a959c4150030e7e213923510ad68
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72959
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Besides fw.cfg, each combo entry needs dedicated APCB files. If no new
APCB is provided, the main APCB is used for all entries.
The combo is fully supported after this.
Change-Id: I21c2bf7d98ded43848ae8a8bb61d1ded1a277f88
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58620
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
There is a technical debt in ChromeOS flashrom, `cros_alias.c`, which
is to work around ChromeOS calling flashrom with `-p host` instead of
`-p internal`.
Replace all `-p host` occurrences with `-p internal`.
BUG=b:296978620
TEST=none
Signed-off-by: Hsuan Ting Chen <roccochen@chromium.org>
Change-Id: I81674213b9a21598002f349ced1130f0844841ca
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77865
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
The primary branch changed names. To remain robust, just use HEAD,
which will point to whatever is authoritative.
Change-Id: I809ea748a5e51f4eea6bc227fa1fc5c8b07fe2ef
Signed-off-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78015
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Fails to build on musl libc as pci/types.h expects "POSIX types", which
are not implemented, instead of stdint.h when using pre-C99 versions.
Change-Id: Id1cf5bd72a0b4d76c87dc62c443d02df18ddd3fe
Signed-off-by: Nicholas Sudsgaard <devel@nsudsgaard.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77791
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For x86 eXecute-In-Place (XIP) pre-memory `.data` section support, we
have to use an extra segment as the VMA/LMA of the data is different
than the VMA/LMA of the code.
To support this requirement, this patch makes cbfstool:
1. Allow the load of an ELF with an extra segment
2. Makes add-stage for XIP (cf. parse_elf_to_xip_stage()) write its
content to the output binary.
To prevent the creation of unsuitable binaries, cbfstool verifies that
the LMA addresses of the segments are consecutives.
TEST=XIP pre-memory stages with a `.data` section have the `.data`
section covered by a second segment properly included right after
the code.
Change-Id: I480b4b047546c8aa4e12dfb688e0299f80283234
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77584
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For x86 eXecute-In-Place (XIP) .data section support, cbfstool need to
to skip relocation of the .data section symbols in addition to
.car.data section symbols.
To support this requirement, this patch makes the `-S` option take a
multiple section names separated by commas.
TEST=With `-S ".car.data .data"`, XIP pre-memory stages with
a `.data` section do not have any of the `.car.data` or `.data`
section symbols relocated.
Change-Id: Icf09ee5a318e37c5da94bba6c0a0f39485963d3a
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77560
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
This will be needed to switch over to main branch in coreboot
Change-Id: I90fadf2352d56074ce8b58d559a73b0c53fac14b
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75782
Reviewed-by: Patrick Georgi <patrick@coreboot.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In preparation for switching over coreboot.
Change-Id: Id66f0def84b913fc8fdd4ee77fef996e45dbd4f5
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75780
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This is only needed once we want to recreate the docker
Change-Id: I493acb4de615508b08826f814ef6ac1b37cbdf0c
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75781
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Iea1a7e61b60c4bf04be2fed9c503eaf7e20fe462
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75783
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
... so we can switch coreboot over.
Change-Id: Ib0487014fd49829e0d021533b04df9e8bd1a757a
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75779
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nicholas Chin <nic.c3.14@gmail.com>
|
|
Change-Id: I9ab101e06ed670dfe6802f9bd0df128d056446db
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77540
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
We don't have file for the fuse chain, but we need to set the level
for some cases.
Change-Id: Idb546f761ae10b0d19a9879a9a644b788828d523
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77506
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
|
|
Change-Id: I1fb3630bf5e8a56ddcf6102faffde568134accc9
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77375
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I6c985974e2eeea1329b2dbb232711c72b0bd99bc
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76852
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Change-Id: I67d443cb15d89482b20b01f4068502b16ac8fc8e
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76865
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Change-Id: I08187c339ebbe84b183f3c6e53f0eea540620fbf
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77505
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This patch adds support for logging the firmware splash screen event
to the event log. There could be two possible scenarios for this
event: enabled and disabled.
BUG=b:284799726
TEST=Verify that the event shows up in the event log when the user
selects the HAVE_FSP_LOGO_SUPPORT and BMP_LOGO configs to display
the firmware splash screen.
Change-Id: I1e224903df21159d6eef2849a7d6fb05de09f543
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77508
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Use "int foo(void)" instead of old-style "int foo()".
Change-Id: Ieb151c2db1c0ee9222dbacccae78ca725bdcde08
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77498
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use "int foo(void)" instead of old-style "int foo()".
Change-Id: I19869ce2f47b543af4552ea23ce1fd1beea2f892
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77497
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use "int foo(void)" instead of old-style "int foo()".
Change-Id: I609c0332132389c07b03db40dc48dc94ca836a56
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77496
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
x86 assembly code uses a lot of nested macros so increase the default
value from 20 to 1000.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: Ic23c452514de7dc1aa420541b756c443180b8b37
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77430
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The tool 'toada' which converts the Kconfig output to ada syntax keeps
running even when it can't parse something. Change that behavior to
halt, and update the error message to show where the error is coming
from.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I29807a054581060d04b9ecbe02f2ba666c46bcf2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77422
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Any builds using ADA were getting a message saying:
`couldn't parse value '-1' for 'SEABIOS_DEBUG_LEVEL'`
This change allows toada to parse negative integers.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I6507c54976b67f1ad70846b6bd6c54c861130d3d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77421
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Add new documentation generated by util/util_readme/util_readme.sh.
This also fixes the following Sphinx warning:
util/abuild/index.md: WARNING: document isn't included in any toctree
Change-Id: I26c33af3c5a5853f6bcce23e982a6b192b01f1d7
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77441
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nicholas Chin <nic.c3.14@gmail.com>
|
|
In order to support logging of events for PSR data backup command
status during CSE firmware downgrade, add support for
ELOG_TYPE_PSR_DATA_BACKUP and ELOG_TYPE_PSR_DATA_LOST types.
BRANCH=None
BUG=b:273207144
TEST=Verify event shows in eventlog after CSE firmware downgrade
Change-Id: Ibb78ac8d420bb7a64328ce009ddcb99030519ec6
Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com>
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77005
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Anil Kumar K <anil.kumar.k@intel.com>
|
|
When the script is run, it fetches a new copy of the repo, then creates
a tag, signed by GPG. When this signing step runs, a window pops up for
the user to enter their PGP key's passphrase. This window prevents the
user from doing anything else on their desktop, like looking up the
passphrase. It also times out after a while, and causes the script to
fail at that point.
To prevent this annoyance, pause right before the step asking for the
passphrase until the user is ready.
Because the submodules aren't tagged, we can delay their update until
after the tag is created to lower the amount of time needed before the
tag & signing step.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I414dfc0f8944b4408881392278a2bce2a364992b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77366
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This script allows any user with abandon rights to abandon patches that
haven't been touched (reviewed, commented on, rebased, etc) in over a
year.
As a part of the release process, we're now going to run the script to
abandon all of those patches so that we don't get to the point of
needing to abandon 1300 patches again in the future.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I4a07c09edf02d9c1858a58322095eefbceb529d3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77365
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
The doc.coreboot.org container is several years out of date, using the
three year old Alpine 3.8 as the base image along with Sphinx related
pip packages which are even older. Accordingly, update the documentation
related pip packages in the coreboot-jenkins-node container as well.
- Update doc.coreboot.org to Alpine 3.18.3
- Update documentation related pip packages on coreboot-jenkins-node
and doc.coreboot.org to the latest versions on PyPI
- Update Sphinx to 6.2.1 as the latest version of sphinx_rtd_theme does
not yet support sphinx >= 7
The updates also noticeably improve performance, dropping documentation
build times from ~75 s down to ~42 s on my system from the Alpine+Python
updates alone, and further down to ~35 s with the rest of the updates.
TEST: The documentation builds and renders properly when built using the
updated container.
Change-Id: I38dfd22ee71c3779ab5fd3b3060e4675e9e3fe54
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73159
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
If IASL isn't installed, the genbuild script throws a confusing warning.
This can and should be ignored because toolchain.inc will find this and
provide a much better error message.
The trailing >/dev/null was probably intended to do this, but didn't
actually affect anything.
Adding quotes around the IASL command will make "" be the command that
tries to get run instead of `-v` when IASL isn't present. This will
always be a failure, whereas `-v` could theoretically be a valid
command.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ibff93db670766c4de21faa7553f2003450465407
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76857
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
This binutils patch was pushed by the original author using the word
"loosing", which means "to release" instead of "losing", meaning to drop
or misplace.
I did not change the spelling of the commit message inside the patch so
that the patch can still be tracked easily, but wanted to fix the
mistaken spelling which appears when the patch is applied when building
the crossgcc toolchain.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I66fd596a79c9eb331f473d175180cf7bb5a38529
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77327
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
- Change delimiter characters to safe characters to keep the output
from getting mangled when imported into a spreadsheet.
- Change hyphens for statistics to asterisks for easier use in the
release notes.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I94f581d697f58cb29a662ac70ef9fd1d8c1e98ef
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77332
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
- Print submodule updates the way we want it for the release.
- Change hyphens on stats to asterisks.
- Add asterisks before authors.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I23e39fa47fe418ee51fb957fcb5fc25b50950e38
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77331
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The -f|--fetch option is being added to download and verify the tarballs
without doing a build. This will be used specifically to archive the
toolchain tarballs for the release.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ia68dbdcbf2d0fa4bb433511dc5e2f980f6762204
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77333
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
We've had issues in the past where building with a sufficient number of
processors would expose a previously hidden timing issue in the build.
Those have frequently been in the path of a single chip or architecture,
so this adds a few different builds.
I'd like to have a representative sampling without increasing the build
time too much so maybe in the future, we can modify the clang build
targets to be different than the GCC targets.
These can be updated to different targets over time.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I51e39bc1ce6b9b7c257d0170ce3d2b5ab99d35df
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77329
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
The test-abuild target fails since the `scan-build` switch is missing a
dash. Fix it.
Change-Id: Iae10f639c43fed7709698e620e732cddce5658d8
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74240
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
scanbuild and ccache don't work together, so separate ccache from the
rest of the abuild options. All of the other tests get ccache, but
scanbuild never does.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: If057ed20c687ac8b501d20c6b4af91f8c0ab84b7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77326
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
When installing the python modules with pip3 as root, the installer
throws a lot of warnings about conflicts and recommends that it not
be run that way. This change installs the python modules as the
coreboot user instead. The --break-system-packages argument can now
be removed.
It takes along some other changes made to the coreboot home directory
which also don't need to be run as root, and now adds the .local/bin
directory into the path.
The trailing docker PATH configuration is discarded as cleanup - it
doesn't have any effect. Nothing uses it in the Dockerfile, and it
doesn't end up updating the path, which is set by /etc/profile.
Change-Id: Ie8273009bb527e267584bba84504191aa7294ca3
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76855
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The libfreetype6-dev has been a transitional package pointing at
libfreetype-dev for a while now. The libfreetype6-dev package is
currently out of date in debian sid, so it's a good time to switch
away from it.
TEST=Rebuild coreboot-sdk
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: If40e9eacf871d3840745ea18ec2ff5975cc62da7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77328
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The default branch for the board-status repo was renamed to main, and
thus the -u option for board_status.sh no longer works as it tries to
push to master. Update the branch accordingly.
TEST: board_status.sh is able to upload results to review.coreboot.org
using the -u flag.
Change-Id: Ic90e95d8701e21c4ae30a7ac85560eebe7658d79
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77324
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I83e3c383faec0fd7b2cf768b7a4c237edd986666
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76469
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Excluding the "recommended" packages reduces the size of the container
image from ~8.40GB to ~7.23GB.
Install the following packages in addition as they are useful for one or
the other case, or at some point even required:
* ca-certificates
* less
* neovim
* openssh-client
Change-Id: Ic38ba75765e3a0c21bbfe3f380880c9ac575d0d2
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76085
Reviewed-by: Nicholas Chin <nic.c3.14@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
While Debian Sid provides GCC version 13, GNAT is still on version 12.
To keep them in sync, install GNAT 13 explicitly instead of the meta
package that is still referring to GNAT 12.
The coreboot toolchain including GNAT still compiles fine.
Change-Id: Ifb2b4c5fbaf3c0a8a78f6ebe244e2ccfec664b41
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77191
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
The site-local directory is not checked into the coreboot tree, so this
change excludes it by default. By adding the site-local directory,
an issue could be missed in the rest of the coreboot tree.
This change also adds a new command-line argument of -S or --site_local
that re-enables the site-local checking.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I95efa3e7b2cbb84e5c84d263222d8e914626d314
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77138
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
The docker-shell target was originally intended to point at the
docker-jenkins-node image, and was documented as such. It was actually
split into two targets - docker-shell and docker-jenkins-shell.
This fixes the documentation for docker-shell and adds new help
for docker-jenkins-shell. The docker-jenkins-shell target is also
noted as phoney now.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ib3ce82f6a73a2f81e5ae51ce8063ae4e59ef67db
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76854
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Now that all of the makefiles under the src tree have SPDX headers,
add that expectation to the license header lint tool by removing
the exception for Makefile.inc.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Iab9d3262621af09a1c625378ae2e61e8a736cdf8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76952
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Based on contents from coreboot wiki[1], this patch adds much needed
documentation for the very important abuild utility.
On top of what was there:
- Mainboard targets have been updated
- Added example for building one variant of one board
- Added example for building boards selectively and/or with custom
configurations using --skip_set/--skip_unset, -K, and config files
[1] https://www.coreboot.org/Abuild
Change-Id: I69701eaeef616828bc30736aba2f617e844a3148
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76775
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
The command "git branch -a | grep -q ${branch}" may not exit with 0 when
pipefail is set. "grep -q" exits immediately with exit code 0 as soon as
a match is found. However, at that point "git branch -a" may be still
writing to the pipe, leading to SIGPIPE. When pipefail is set,
PIPESTATUS 141 will be returned. Fix the problem by not using "grep -q".
Also fix the branch name in the generated commit subject.
Change-Id: Ic07efb5e2a4f3b7bbc6e76da9e026771bc685bdb
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77085
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The change does the following:
- adds PCH IDs for 700 series chipsets per the DOC# 619362 rev 2.2
- updates GPIO table for PCH-S per the DOC# 618659 rev 2.1
- enables dumping GPIOs for 700 series PCH
Change-Id: I4509ad714772ce90cdee5135227c02640acb6085
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75873
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
IT8784E is basically a IT8786E stripped from serial ports 3-6.
There are very few minor register differences in EC IO space and GPIO
LDN, which are covered by this patch.
Based on IT8784E-I Preliminary Specification V0.7.1 (non-public).
TEST=Dump SIO configuration on Protectli VP4670 (vault_cml).
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I5de8aeaff9697b854281391083f77a1083d12fe6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74172
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Use C99 flexible arrays instead of deprecated fake flexible arrays.
This reduce difference with upstream.
Change-Id: I24016493280e22f34ae5cce49fe7c1f520270f9a
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76869
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
This reduce the difference with linux v6.5-rc4.
Change-Id: I64bbc09b531ea217514601386dd517af92aa40f1
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70200
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This reduce the difference with linux v6.5-rc4. and check for
const static or static <non ptr type> const declarations.
Change-Id: Ib4b37e130f2edbfe0385f0707a8c910a244bcfc7
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70202
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
This reduces the difference with linux v6.5-rc4.
Change-Id: I9f0e9f12a177c32b401fda74cbb30c5c259b3744
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70201
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
This reduces the difference with linux v6.5-rc4.
Change-Id: I59d9619f2e58f24e0a5474bcfa79351e3afb933d
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76870
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
This reduce the difference with linux v6.5-rc4.
Change-Id: I63b3561471d3bd0ebfe7e5733c6dd6fb673904e0
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65829
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Problem:
Me: $ util/abuild/abuild -t asus/p2b -b p2b-ls
abuild: No such target: asus/p2b, variant: p2b-ls
Cause: We identify boards and variants using path names in tree, so
I type in the test command above. abuild identifies all board variants
the Kconfig way, in all caps and all underscores.
Result: Expectation gap and abuild can't find anything where we expect
it to. All variants with a hyphen in their names are affected.
Fix: Add a substitution to replace hyphens with underscores.
Test: I get my abuild with the command above, even a variant-specific
test config works.
Change-Id: I10d5b471dac41c50a85c4a309ec561b02687bb9a
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41918
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Change-Id: Ic1450f0fa8eb69273aa907dea2eba8f7e7131ef1
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72510
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Add packages required to extract the `mrc.bin` from a ChromeOS firmware
image as per the instructions provided in
https://doc.coreboot.org/northbridge/intel/haswell/mrc.bin.html
Change-Id: I81ed4ef55f0ba745a8a0a0cc85c2b00360f59297
Signed-off-by: Tom Hiller <thrilleratplay@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67160
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
The test for the docker cache directory was used by two different
targets, so turn it into its own target.
Add missing $ for whoami commands.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ic5e1d28110097eb502959e81bafe77faa0fc7fae
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76707
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
The coreboot-jenkins-test docker image takes the coreboot-jenkins-node
docker image and runs a series of tests to verify that things build
properly.
This was original created to test the coreboot-sdk, but build functions
like the documentation have been moved from the sdk image into the
jenkins node, so the test needs to be renamed.
Add the makefile target to the help and phony target list at the same
time.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I0e6282bbb163064f177c8e68e7180ba2bdc101f1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76706
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Some stages in bootflow prefer to use 16 bytes UUID instead of
traditional 2 bytes FWID to identify the firmware components they
verify/validate. Hence add version 2 of hash table which identifies
firmware components using UUID. Other than UUID and a reserved field for
alignment reasons, the format of the hash table is very similar to hash
table v1.
BUG=b:277292697
TEST=Build and boot to OS in Myst with PSP Verstage enabled. Ensure that
the hash table v2 is built and installed into BIOS image for the
components that are configured in amdfw.cfg file. Ensure that the
validation by PSP is successful for all the relevant components during
the boot flow.
Change-Id: I2899154086cf8e90c3327178157b07ead034b16e
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76586
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Tim Van Patten <timvp@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Currently this tool generates a hash table to verify signed binaries,
with a 2 byte FWID as the only kind of identifier. Going forward some
binaries are going to adopt 16 byte UUID identifiers and more binaries
will follow in the future SoCs. Hence add support for handling multiple
firmware identifier types. While at this remove the unused fwid from the
PSP FW table.
BUG=b:277292697
TEST=Build BIOS image and boot to OS in Myst & Skyrim.
Change-Id: I5180dc0fe812b174b1d40fea9f00a85d6ef00f2f
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76585
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Remove old workaround for automake and aclocal.
Change-Id: Ifc00a479fd08d9ee4d97df6da8762bae2d097827
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76740
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Debian sid symlinks already python3 to python.
Change-Id: Ibc3b2b047df7e1066624d4dd8aa9664ab1869222
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75875
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
To support full 64-bit addresses, there is a new field `ext_lfb_base`
since Linux 4.1. It is unclear, however, how a loader is supposed to
know if the kernel is compatible with this. Filling these previously
reserved bits doesn't hurt, but an old kernel would probably ignore
them and not know that it's handling a clipped, invalid address. So
we play safe, and only allow 64-bit addresses for kernels after the
2.15 version bump of the boot protocol.
Change-Id: Ib20184cf207f092062a91ac3e6aa819b956efd33
Signed-off-by: Nico Huber <nico.h@gmx.de>
Co-authored-by: Bill XIE <persmule@hardenedlinux.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76479
Reviewed-by: Bill XIE <persmule@hardenedlinux.org>
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Icb9a5bdf94013fe493dc8ec634cf3094bcff2838
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75803
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This reverts commit 91f5da477677cc6a7a7d5cdc50f5d2bf71981e44.
Commit breaks booting on MDN (and likely others). Boot hangs on:
[NOTE ] MRC: no data in 'RW_MRC_CACHE'
Change-Id: Id8042690af2764d6e46fe01287be598091b1a239
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76718
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Translate the coreboot framebuffer info from coreboot tables to
the Linux zero page.
Tested in QEMU/Q35 with a kernel w/ efifb enabled.
Change-Id: I2447b2366df8dd8ffe741c943de544d8b4d02dff
Signed-off-by: Nico Huber <nico.h@gmx.de>
Co-authored-by: Bill XIE <persmule@hardenedlinux.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76431
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Bill XIE <persmule@hardenedlinux.org>
|
|
Use C99 flexible arrays instead of older style of one-element or
zero-length arrays.
It allows the compiler to generate errors when the flexible array does
not occur at the end in the structure.
Change-Id: I6b87680ec9f501945ae266ae4e4927efd2399d56
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76815
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Drop the program name and split the printf call with multiple lines of
text into separate printk calls.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I43df1fd02ce0fdbb6b22e1d4eda45017811c48d8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76774
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use the domain number in static references to pci device so that
device domain 0x20 on
device pci 00.0 on end
end
results in
DEVTREE_CONST struct device *const __pci_32_00_0 = &dev_#something;
in static.c
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I7a98b2325ee08feb1a3d1d4b333f3f4e53934b00
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76466
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Some SoC like Genoa require this.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I01ff792e8016b16f34bc69722469b63cae5a42ff
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76468
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
|
|
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: Ife8c166350030cb89d794ac42834d79ec933f278
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76467
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
