| Age | Commit message (Collapse) | Author |
|---|
|
checkpatch: add option for excluding directories
when importing code from external sources
Using --exclude <dir> we should be able to exclude a list of well
defined locations in the tree that carry sources from other projects
with other styles.
This comes from the 01org/zephyr project in github:
Original-Change-Id: I7d321e85eed6bc37d5c6879ae88e21d20028a433
Original-Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change-Id: Icc9e841e7d84026d6ab857ff90b0f093515ccaad
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/18568
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
|
|
This adds support for the Wildcat Point LP for intelmetool.
When the tool detected a Wildcat Point LP,
then the ME will be reported as difficult-to-remove.
Change-Id: I35423db11cdc1e21e7f02ce90dace7fb4d236c45
Signed-off-by: Huan Truong <htruong@tnhh.net>
Reviewed-on: https://review.coreboot.org/18575
Tested-by: build bot (Jenkins)
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
The intel ME checker tool would segfault if it reaches the end of
the loop without having the dev pointer set. This happens when
it gets to the end of the previous loop without knowing what to do
with any of the devices it sees.
This patch makes sure the pointer is not NULL before accessing it.
Change-Id: Ia13191799d7e00185947f9df5188cb2666c43e2a
Signed-off-by: Huan Truong <htruong@tnhh.net>
Reviewed-on: https://review.coreboot.org/18573
Tested-by: build bot (Jenkins)
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This was removed from the previous version, but we'd like it in
a separate patch, so it's obvious and can easily be applied to the
next version.
Change-Id: I9396009e82e762aa0cc037dbe9e7133962af6354
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/18577
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This is version 03aed21 from linux/scripts, updated on Dec 12, 2016.
The version needs to be updated because Perl version 5.20 deprecated the
/C regex expression. Perl version 5.24 removed it completely, so the
old version fails to run on the coreboot builders.
Change-Id: Ib97997237ca64c65d7f91d568ae4bec000804331
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/18571
Tested-by: build bot (Jenkins)
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
All files:
- Previously, various things were hardcoded into the docker containers
that made it necessary to update the Dockerfile files for each new
version of the sdk. Turn those into 'Variables" that are updated during
the build step. Because the makefile is piping the dockerfile through
the sed command and back into the docker build command, the normal
docker "COPY" keyword doesn't work.
coreboot-jenkins-node changes:
- Run ssh-keygen -A to explicitly generate the ssh keys. This fixes an
error: Could not load host key: /etc/ssh/ssh_host_dsa_key
coreboot-sdk changes:
- Remove apt-get upgrade command - The Dockerfile guide recommends
not to run this.
- Change libssl-dev to libssl1.0-dev. libssl-dev's header files won't
build the Chrome-EC codebase.
- Add libisl-dev, needed to build the riscv toolchain.
- Build the toolchain using the -b option
- Add environment variables containing the version and commit that the
coreboot-sdk was built from.
Makefile:
- Update targets to use the version and commit variables
Change-Id: I2c1376fe4b791da2a62fca11bc92c4774cbef1c8
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/18001
Tested-by: build bot (Jenkins)
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
- GCC gets updated from 5.2.0 to 6.3.0:
gcc-6.3.0_riscv.patch is a diff between 5fcb8c4 and 173684b in
riscv-gcc, and it needs gcc-6.3.0_memmodel.patch.
- Binutils goes from 2.26.1 to 2.28:
There is a build error for MIPS gold so I add patch for it.
- GMP gets a bump from 6.1.0 to 6.1.2
- MPFR is updated from 3.1.4 to 3.1.5
- GDB is upgraded from 6.1.1 to 6.1.2
- IASL is changed from 20160831 to 20161222
- LLVM is changed from 3.8.0 to 3.9.1
Change-Id: I20fea838d798c430d8c4d2cc6b07614d967c60c5
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17189
Tested-by: build bot (Jenkins)
|
|
Relevant changes (commit 250b2ec):
* Fix a bug for ME6 Ignition images.
* Fix signature checking for ME11 and later.
* Add command line arguments.
* Add an option to relocate the FTPR partition to the top of the
ME region, recovering most of the ME region space.
* Print the image minimum size.
* Add write boundary checks, to prevent writes on other regions
in case of bugs.
The new changes have been tested on multiple platforms by the
me_cleaner users. They have been tested also on the author's
X220T with coreboot, where the ME region has been shrinked up to
84 kB without any issue.
Change-Id: I3bd6b4cba9f5eebc3cd4892dd9f188744a06c42b
Signed-off-by: Nicola Corna <nicola@corna.info>
Reviewed-on: https://review.coreboot.org/18473
Tested-by: build bot (Jenkins)
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
Change-Id: I7de37a026a0899c2d07ea17c9377c8d2283450ab
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Reviewed-on: https://review.coreboot.org/18481
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
It explains the prerequisites to run the script, some
background on how to setup the computer running the script,
and the board it gathers the information from.
That information is too long to fit inside the script's
help.
Change-Id: Iecba7310ff1583149c02728e955716775bcbbdc4
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
Reviewed-on: https://review.coreboot.org/6660
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This company doesn't do custom hardware anymore and doesn't
host the sources anymore. We therefore point to the archived
sources instead.
Change-Id: I5ce4f6a468b852fc1d0947fe2b28a5297f14c437
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
Reviewed-on: https://review.coreboot.org/11889
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Tested-by: build bot (Jenkins)
|
|
Update sconfig lex and yacc files to add support for a new "SPI" device
type in the devicetree. SPI device takes only parameter i.e. chip select
number for the device on the SPI bus.
Re-generate the shipped files for sconfig using flex 2.6.0 and bison
3.0.4 (make CONFIG_SCONFIG_GENPARSER=1). Clean up local paths that leak
into generated files.
BUG=chrome-os-partner:59832
BRANCH=None
TEST=Compiles successfully.
Change-Id: If0831e25b3e4ed87827ad92356d7bf47b6387884
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/18339
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
Change-Id: I7c1e3cf558d447838819b4d6a63d93d48d5f13e0
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/18316
Tested-by: build bot (Jenkins)
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Change-Id: Ic8e850bdf75d38fc061fb3a8c55d38bcf09c305a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Found-by: Coverity Scan #1129146
Reviewed-on: https://review.coreboot.org/17886
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Given a specification of bitfields defined e.g. as follows:
specfile:
{
"field1" : 8,
"field2" : 4,
"field3" : 4
}
and a set of values for setting defaults:
setterfile:
{
"field1" = 0xff,
"field2" = 0xf,
"field3" = 0xf
}
You can generate a binary packed blob as follows:
./blobtool specfile setterfile binaryoutput
binaryoutput: ff ff
The reverse is also possible, i.e. you can regenerate the setter:
./blobtool -d specfile binaryoutput setterorig
setterorig:
# AUTOGENERATED SETTER BY BLOBTOOL
{
"field1" = 0xff,
"field2" = 0xf,
"field3" = 0xf
}
This tool comes with spec/set files for X200 flash descriptor
and ICH9M GbE region, and can be extended or used to decompile
other data blobs with known specs.
Change-Id: I744d6b421003feb4fc460133603af7e6bd80b1d6
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Reviewed-on: https://review.coreboot.org/17445
Tested-by: build bot (Jenkins)
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
With coreboot 4.4 switched to "Descriptor mode" for Lenovo T500
it automatically unlocks all flash regions. For Gbe region
the "Requester ID" was hardcoded resulting in *dead* Gbe.
Keep board specific "Requester ID" while unlocking Gbe region.
Allows Lenovo T500 to boot with IFD "Descriptor mode" with unlocked
flash regions.
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Change-Id: Ia4b5d1928e84bee42182fc83020e3a13fadc93c4
Reviewed-on: https://review.coreboot.org/18055
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Adds checks for OpenBSD in all the places that were already checking for
NetBSD. This fixes e.g.:
ec.c:21:20: error: sys/io.h: No such file or directory
which was caused by defaulting to Linux.
Also, OpenBSD calls its amd64 iopl amd64_iopl instead of x86_64_iopl.
This change just defines iopl appropriately depending on the
OS and architecture.
TEST=Build on OpenBSD 6.0 or -current from 2017-01-25.
Change-Id: If6d92a9850c15cd9f8e287cc4f963d3ff881f72c
Signed-off-by: Steven Dee <i@wholezero.org>
Reviewed-on: https://review.coreboot.org/18260
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Speed up the execution of this script from ~6 seconds to ~1 on my
system.
There are some changes to its output, but they're actually _more_
correct: so far, architectures without compiler support kept compiler
options for architectures that ran successfully earlier.
Change-Id: I0532ea2178fbedb114a75cfd5ba39301e534e742
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/18262
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This fixes the build for the generated code for boards with PS/2
keyboard, since commit 448e386309c updated the pc_keyboard_init()
function.
Change-Id: I776b49b847985296eaca4af6d6e49ab5d6abbafe
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Reviewed-on: https://review.coreboot.org/18242
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Intel Core 2 is not further specified since not all chipsets support
quad cores, which could confuse users.
Change-Id: I86c0a41743fe784f432347fa639d3c26604e058e
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/18235
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
- Use dashes instead of underscores for consistency and to match other
coreboot targets
- Fix a couple of places where old target names were referenced
- Remove double 'help' target from .PHONEY target list
Change-Id: I3b464ebf74653a8cc880e982316fd883757ec728
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/18000
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Kill running docker containers before trying to remove images or
containers.
Change-Id: Id2de90edbe5d0dc6ecb906be7101ad9744dbd11e
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/17999
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
- Fix TODO: restrict $1 to allowed values.
- Specifically exclude 'oem' board status directories.
- Exclude any directory that doesn't follow the date format to keep
the script from breaking again in the future if something it doesn't
recognize is pushed. Just ignore it for the wiki.
- Fix shellcheck warnings.
Change-Id: I2864f09f5f1b1f5ec626d06e4849830400ef5814
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/18225
Tested-by: build bot (Jenkins)
Reviewed-by: Timothy Pearson <tpearson@raptorengineering.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
me_cleaner is a tool to strip down Intel ME/TXE images by removing all
the non-fundamental code, while keeping the ME/TXE image valid and
suitable for booting the system. The remaining code (ROMP and BUP
modules) is the one responsible for the very basic initialization of
the ME/TXE subsystem and can't be removed.
This tool exploits the fact that:
* Each ME/TXE partition is signed individually and it is possible to
remove both the partition and the signature.
* The ME/TXE modules are not signed directly, instead they are hashed
and the list of their hashes is hashed again and signed: this
means that modifying a module doesn't invalidate the signature,
but only the hash of that single module.
* The modules hashes are checked only when the corresponding module
needs to be executed.
* The system can boot after the execution of the first module (BUP,
inside the FTPR partition), even if the subsequent stages fail.
Currently me_cleaner works on every Intel platform with Intel ME or
Intel TXE with the following limitations:
* Doesn't work when Intel Boot Guard is set in Verified Boot mode.
* Doesn't fully work on Nehalem yet.
* On Skylake and later generations, since the partitions' internal
structure has changed, me_cleaner leaves intact the FTPR
partition, removing all the the other partitions.
This tool has been tested on multiple platforms and architectures by
different users, and seems to be stable. The reports are available
here:
https://github.com/corna/me_cleaner/issues/3
A more in-depth description of me_cleaner is available here:
https://github.com/corna/me_cleaner/wiki/How-does-it-work%3F
Change-Id: I9013799e9adea0dea0775b9afe718de5fc4ca748
Signed-off-by: Nicola Corna <nicola@corna.info>
Reviewed-on: https://review.coreboot.org/18203
Tested-by: build bot (Jenkins)
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
If compression failed, just store the uncompressed data, which is what
cbfstool does as well.
Change-Id: I67f51982b332d6ec1bea7c9ba179024fc5344743
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/18201
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
When the ME is hidden (most likely because it was disabled), it cannot
be found until activate_me() is called.
Change-Id: Ie1f65f61eb131577d7254af582e2709660f4da27
Signed-off-by: Dan Elkouby <streetwalrus@codewalr.us>
Reviewed-on: https://review.coreboot.org/18149
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
It's a BSD function, also, we missed to include `endian.h`.
Just including `endian.h` doesn't fix the problem for everyone.
Instead of digging deeper, just use our own endian-conversion from
`commonlib`.
Change-Id: Ia781b2258cafb0bcbe8408752a133cd28a888786
Reported-by: Werner Zeh <werner.zeh@siemens.com>
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/18157
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
The script now automatically discovers the original branch (if known)
and configures itself appropriately.
Additionally, commit messages for changes coming _from_ upstream will
be prefixed with "UPSTREAM: ".
With the optional --cros argument, it also adds a BUG/BRANCH/TEST block
at the right place in the commit message (right above the metadata) if
one doesn't already exist.
Change-Id: I81864ddca62fd99a9eb905d7075e5b53f58c4eb5
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/18135
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
cbfstool ... add ... -c precompression assumes the input file to be
created by cbfs-compression-tool's compress command and uses that to add
the file with correct metadata.
When adding the locale_*.bin files to Chrome OS images, this provides a
nice speedup (since we can parallelize the precompression and avoid
compressing everything twice) while creating a bit-identical file.
Change-Id: Iadd106672c505909528b55e2cd43c914b95b6c6d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/18102
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
cbfs-compression-tool provides a way to benchmark the compression
algorithms as used by cbfstool (and coreboot) and allows to
pre-compress data for later consumption by cbfstool (once it supports
the format).
For an impression, the benchmark's results on my machine:
measuring 'none'
compressing 10485760 bytes to 10485760 took 0 seconds
measuring 'LZMA'
compressing 10485760 bytes to 1736 took 2 seconds
measuring 'LZ4'
compressing 10485760 bytes to 41880 took 0 seconds
And a possible use for external compression, parallel and non-parallel
(60MB in 53 files compressed to 650KB on a machine with 40 threads):
$ time (ls -1 *.* |xargs -n 1 -P $(nproc) -I '{}' cbfs-compression-tool compress '{}' out/'{}' LZMA)
real 0m0.786s
user 0m11.440s
sys 0m0.044s
$ time (ls -1 *.* |xargs -n 1 -P 1 -I '{}' cbfs-compression-tool compress '{}' out/'{}' LZMA)
real 0m10.444s
user 0m10.280s
sys 0m0.064s
Change-Id: I40be087e85d09a895b1ed277270350ab65a4d6d4
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/18099
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This speeds up the lzma encoder approximately four-fold.
Change-Id: Ibf896098799693ddd0f8a6c74bda2e518ecea869
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/18098
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
There are systems that come with curl but not wget (eg macOS) and they
now have to install one less additional dependency.
Also fix some cosmetic issues in console output and require valid
certificates on https downloads.
Change-Id: Idc2ce892fbb6629aebfe1ae2a95dcef4d5d93aca
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/18048
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
When running abuild outside of jenkins, because all of the builds are
printed intermixed, it's easy to miss when a board has failed the build
by looking at the output. This saves a list of failed builds and prints
the list at the end of the run.
- Add a command line option to mark when abuild is being called
recursively.
- Add all failed builds to a list.
- Print the list when a non-recursive abuild run exits.
Change-Id: Icb40ed8083a57bbcde49297d2b0814f98dcbb6c8
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17890
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Variable name of inteltoolArgs was fixed.
The way of passing arguments to inteltool was changed from "-a -f"
to "-af" which is better as the string seems to be parsed
as a single argument.
Change-Id: I0c48fb1e912261748ba9e2b91c291bac28b9e856
Signed-off-by: Sebastian 'Swift Geek' Grzywna <swiftgeek@gmail.com>
Reviewed-on: https://review.coreboot.org/18050
Reviewed-by: Stefan Tauner <stefan.tauner@gmx.at>
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Gerrit will let you push a patch without a signed-off-by line,
although I believe it can't actually be merged. Instead of catching
it either manually, or when the patch is attempting to be merged,
catch this in the jenkins builder.
Change-Id: I80161befa157266dd4e3209839a06ff398aab6bb
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17941
Tested-by: build bot (Jenkins)
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
That's undefined behavior in C
Change-Id: I671ed8abf02e57a7cc993d1a85354e905f51717d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Found-by: Coverity Scan #1229557
Reviewed-on: https://review.coreboot.org/18014
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This allows the make jenkins-build-toolchain to use the
BUILDGCC_OPTIONS variable. Previously, the options were hardcoded.
Change-Id: I5f4c1d3fc8c714ec3640356ae3c86ae157f486d2
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17766
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
If we use ccache we have to interpret spaces in $CC as separation
characters. The downside is that we can't support spaces in the
compiler's path. But, well...
Change-Id: I4e6e6324389354669a755f570083a40ff00b1bbf
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/18018
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins)
|
|
cbfs-payload-linux.c:255:43: note: add parentheses around left
hand side expression to silence this warning
if ((hdr->protocol_version >= 0x200) && (!hdr->loadflags & 1)) {
[pg: also fix the semantics. Thanks Nico for catching this]
BUG=chromium:665657
TEST=coreboot-utils builds
Change-Id: I025c784330885cce8ae43c44f9d938394af30ed5
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 35c4935f2a89c3d3b45213372bcf0474a60eda43
Original-Change-Id: I8758e7d158ca32e87107797f2a33b9d9a0e4676f
Original-Reviewed-on: https://chromium-review.googlesource.com/411335
Original-Commit-Ready: Manoj Gupta <manojgupta@chromium.org>
Original-Tested-by: Manoj Gupta <manojgupta@chromium.org>
Original-Reviewed-by: Mike Frysinger <vapier@chromium.org>
Reviewed-on: https://review.coreboot.org/17568
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Change-Id: Iab6fe065faeacfca3b41eb5bae1075dcfb1a2b05
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Found-by: scan-build (clang 3.8)
Reviewed-on: https://review.coreboot.org/18021
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: Idbe147c1217f793b0360a752383203c658b0bdce
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Found-by: Coverity Scan #1287090
Reviewed-on: https://review.coreboot.org/18020
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Only allocate ptr_type when it's actually used.
Change-Id: Iea5f93601a42f02a1866bdff099f63935fdd5b8d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Found-by: Coverity Scan #1129117
Reviewed-on: https://review.coreboot.org/18017
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
argv is only filled for macro->argc > 0.
Change-Id: I5ff21098384afc823efa14be3d5565507fb2b3b2
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Found-by: Coverity Scan #1287089
Reviewed-on: https://review.coreboot.org/18016
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
closure_type is copied then never used again. Close that leak.
Change-Id: Idd4201f7fc6495fde5ad2e1feb7e499e38986e92
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Found-by: Coverity Scan #1287073
Reviewed-on: https://review.coreboot.org/18015
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I0fa231ca3d33300a671810e994c5be54ac10a18b
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17723
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Without this change inteltool cannot read BIOS_CNTL values nor can it
read the SPIBAR values.
Change-Id: I9ff16e060aca66e3cb11c8315a6843ccecd1d3c2
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/17979
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The ICH7 SPIBAR offset and registers are different from later
generation.
ICH8 has a different offset from later generation.
ICH6 has no SPI controller.
Change-Id: I7691bce619089b15805114047bcb1fd121a5722b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/17978
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Based on datasheet: "W83627EHF/EF W83627EHG/EG WINBOND LPC I/O,
Revision : 1.0"
Change-Id: Ia2e5ab8bc454a34a89fe2cf06bfba55261109785
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/17457
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Based on datasheet: "W83627DHG WINBOND LPC I/O, Version: 1.4"
Change-Id: Id20dff7539d926ef6f68265efbfc7420539d9bca
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/17964
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
It's usually not too interesting, so hide it behind -v.
Change-Id: Icffb5ea4d70300ab06dfa0c9134d265433260368
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/17899
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
On a 32-bit system, pointers are 32-bit wide, and not 64-bit, resulting
in the warning below.
```
mmap.c: In function ‘map_physical_exact’:
mmap.c:26:20: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
virt_addr = mmap((void*)mapto, len, PROT_WRITE | PROT_READ,
^
```
Fix this by using compatible types.
Change-Id: I4ede26127efcbd5668b978e6880a0535607e373d
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://review.coreboot.org/17970
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
CXXFLAGS seems to be used a lot and have to be specified independently
from CFLAGS.
Change-Id: Iff4c76e54a46e908299b532fd848165a3dc04d43
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/17937
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I8ff8d51507dcf12cd554c8b4713074a99e47c11e
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/17942
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
GCC 6 can optionally default to building all binaries as position
independent executables (PIE). This breaks linking against static
libraries that are compiled without position independent code (PIC).
Building GMP `--with-pic` in this case seems to be the least fragile
solution.
TEST=Run `make all` and `make BUILDGCC_OPTIONS=-b build-i386` in
util/crossgcc on Debian Stretch.
Change-Id: I5f3185af9c8d599379a628e18724b217b88be974
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/17936
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
|
|
The earlier loop exits gracefully iff i == index. In other cases, member
might be NULL, so check that the scan was successful before using its
results.
Change-Id: I818c233d797d82fa819243c4626dd9c4b7de3ac6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Found-by: Coverity Scan #1129147
Reviewed-on: https://review.coreboot.org/17887
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I5c77b3c5ea3fbc249a8c564a521c2c3c45e1c560
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Found-by: Coverity Scan #1323510
Reviewed-on: https://review.coreboot.org/17877
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I0f78b55b28011cdefc90665bca2a7ea17647e955
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Found-by: Coverity Scan #1129127
Reviewed-on: https://review.coreboot.org/17885
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: I7f9c38fd6e75b32fe1ed8a60c7054f4dd1fcd5c0
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Found-by: Coverity Scan #1129104
Reviewed-on: https://review.coreboot.org/17884
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I0d260254bab714ec939fc199b3a133b0fc05b10d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Found-by: Coverity Scan #1129112
Reviewed-on: https://review.coreboot.org/17883
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I088730fd87dd39fa2c36a06c5770fad05a5808b0
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Found-by: Coverity Scan #1323511, #1323512
Reviewed-on: https://review.coreboot.org/17882
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: Ib53408e8b186c07aa8e42c67131d39c4add05983
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Found-by: Coverity Scan #1323515
Reviewed-on: https://review.coreboot.org/17881
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
It's later tested for NULL, but never initialized to make that test work
reliably.
Change-Id: Iadee1af224507a6dd39956306f3eafa687895176
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Found-by: Coverity Scan #1323515
Reviewed-on: https://review.coreboot.org/17880
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: Ieea7ac7fbc618cd12f843f1606f9ebab37cae67e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Found-by: Coverity Scan #1323508
Reviewed-on: https://review.coreboot.org/17879
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
filebuffer is treated like a string, so it should be zero-terminated
like a string.
Change-Id: I078aa39906394be64023424731fe0c7ae2019899
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Found-by: Coverity Scan #1323473
Reviewed-on: https://review.coreboot.org/17878
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I5193c6a9f08398b881c971c7175654ba5775b34a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Found-by: Coverity Scan #1323509
Reviewed-on: https://review.coreboot.org/17876
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
To make the generated descriptor compatible with latest libflashrom.
Change-Id: I005159dd24e72da9cc43119103c96c5dd5b90a55
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/17447
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I72a7776d530d1cf0b8fa39e558990df3dc7f7805
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Found-by: Coverity Scan #1295494
Reviewed-on: https://review.coreboot.org/17861
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins)
|
|
We might not care much about this buffer, but we really use it later
on...
Change-Id: Ia16270f836d05d8b454e77de7b5babeb6bb05d6d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Found-by: Coverity Scan #1294797
Reviewed-on: https://review.coreboot.org/17860
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I66cb1c88155ef58610bacfb899e0132e4143c7ac
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Found-by: Coverity Scan #1325836
Reviewed-on: https://review.coreboot.org/17859
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: I8b5caf5423135fe683a24db6700b895a2685cb98
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Found-by: Coverity Scan #1323507
Reviewed-on: https://review.coreboot.org/17858
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
- Because $configoptions contains embedded newlines that we want to be
interpreted when we pipe it out to the config file, change that back to
a printf, and tell shellcheck that we want to do it.
- 'make olddefconfig' & 'yes "" | make oldconfig' give us the same
output for the config file, but olddefconfig doesn't generate the log
the way oldconfig does. Go back to the previous behavior.
- Don't overwrite the config log with make savedefconfig.
Change-Id: I4966a3bb2541b452eeb4ca73ac3cd727f8525636
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17853
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
So far, cbfstool write, when used with the -u/-d options (to "fill
upwards/downwards") left the parts of the region alone for which there
was no new data to write.
When adding -i [0..255], these parts are overwritten with the given
value.
BUG=chromium:595715
BRANCH=none
TEST=cbfstool write -u -i 0 ... does the right thing (fill the unused
space with zeroes)
Change-Id: I1b1c0eeed2862bc9fe5f66caae93b08fe21f465c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: baf378c5f2afdae9946600ef6ff07408a3668fe0
Original-Change-Id: I3752f731f8e6592b1a390ab565aa56e6b7de6765
Original-Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/417319
Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org>
Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Reviewed-on: https://review.coreboot.org/17787
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
We never specified what value add-int should write by default.
Change-Id: I240be4842fc374690c4a718fc4d8f0a03d63003c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/17796
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Show an error if a symbol does not have a defined type.
This caused a problem of an undefined symbol in check_defaults, so
we just skip those symbols there as we can't verify the default pattern
without knowing the type.
Change-Id: I28711a77962e16f6fc89789400363edd0fdd0931
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17345
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Since we've removed them from the tree, add a check to keep them out.
Change-Id: I2995da765fee8796a297963d54a1c34f56376efe
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17658
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Overriding symbols within a .config is pretty common when doing
automated builds with various different options. The warning
text makes it sound like this is an issue, so change it to say
'notice' instead. We could get rid of it completely, but it's
not a bad thing to know that we have two copies of the same symbol
in the .config.
BUG=chrome-os-partner:54059
TEST=copy a disabled kconfig option to the end and set it to y.
See notice text instead of warning.
Change-Id: I9f575b2275233f638e42676263348c807e6515bd
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/16691
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Commands for working with docker images:
build-coreboot-sdk - Build coreboot-sdk container
upload-coreboot-sdk - Upload coreboot-sdk to hub.docker.com
build-coreboot-jenkins-node - Build coreboot-jenkins-node container
upload-coreboot-jenkins-node - Upload coreboot-jenkins-node to hub.docker.com
clean_coreboot_containers - remove all docker coreboot containers
clean_coreboot_images - remove all docker coreboot images
Commands for using docker images
docker_build_coreboot <BUILD_CMD=target> - Build coreboot under coreboot-sdk
docker_abuild <ABUILD_ARGS='-a -B'> - Run abuild under coreboot-sdk
Change-Id: I3a75b0615747d32f593948f53eab076f303271bf
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/16388
Tested-by: build bot (Jenkins)
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
- Show an error if a directory is added after the command line options
to catch scripts using the old parameters.
- If an invalid parameter is specified, show the parameter.
Change-Id: Ie8948361f1c51e89a99bdb13df8c554747cd521d
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17741
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
cbroot was previously specified by just adding it to the end of the
command line with no explicit identifier. This change allows it to
go anywhere in the command line and adds the -R or --root identifier.
This makes the command line more consistent. Most of the time, this
argument isn't even needed, as the automatic detection finds cbroot.
Change-Id: I1d6fd8f51765d0d8b29be8af1e8105e06dd44cc8
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17740
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
- Indent with spaces for consistency
- Change lbroot to cbroot
- Remove incomplete list of options from usage line
- Capitalize first word of all option text
- Alphabetize options other than version and help
- Move version and help options to the end
Change-Id: Id5bd4db8d7e3705cbbb93895a46a3608cd1b09e2
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17724
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This cleans up the shellcheck warnings in abuild.
Warning count:
1 Unexpected ==.
1 Use "${var:?}" to ensure this never expands to / .
1 VARIABLE appears unused. Verify it or export it.
1 Use "$@" (with quotes) to prevent whitespace problems.
2 Consider using { cmd1; cmd2; } >> file instead of individual redirects.
2 Expressions don't expand in single quotes, use double quotes for that.
3 Prefer [ p ] || [ q ] as [ p -o q ] is not well defined.
4 $/${} is unnecessary on arithmetic variables.
5 Check exit code directly with 'if mycmd;', not indirectly with $?.
5 Use cd ... || exit in case cd fails.
11 Declare and assign separately to avoid masking return values.
13 Use $(..) instead of legacy `..`.
20 Don't use variables in the printf format string.
104 Double quote to prevent globbing.
Change-Id: I9c77e122435ba87ce3a4aee76b5022f7265f9ef2
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17722
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Update abuild to allow for building saved miniconfig files.
If one or more config files exist for a platform under
coreboot/configs, they will be built instead of the automatically
generated default config.
The config filename needs to start with "config.$VENDOR_$BOARD" to be
picked up by the abuild script.
- Update to version 0.10.0
- Add -d parameter to specify the saved config file directory
- Break 2nd half of create_config function into update_config
to set the payload for saved config files.
- Unset new payload Kconfig options that could be set in a saved
config file.
- Update a bunch of MAINBOARD variable names to BUILD_NAME since
the build name isn't necessarily the same as the mainboard name.
- Split build_target into two functions - build_target and
build_config because one mainboard can now build multiple
configurations.
- Update remove target and call it directly from build_target()
instead of from build_targets()
Change-Id: I1a276d3e507b178f7dcd9dc125fa9c59f1ab47bd
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17590
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
For some reason the \n in the defconfig save error was not escaped.
Change-Id: I6a76b258f461a194fe17aae2b4fa04326b46d8d6
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17742
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
|
|
Change-Id: Ifc5ec645dd27663c1b1fde9ff16d48534606a554
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17600
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins)
|
|
Prototype changed here:
e258b9a intel sandy/ivy: Improve DIMM replacement detection
Change-Id: Id79238db2e497b9163f3bd1b1d5d4bc11fe4da9e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17711
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
It turned out that newer GNAT versions can build our current (5.3.0)
GNAT without bootstrapping. So adapt the version enforcement.
Change-Id: Ie7189e8bcadeee56cf5c2172e8c0ae7cd534685a
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/17706
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
With some newer versions of GCC (experienced with GCC 6.2.1 on Arch-
Linux) the first stage of a boostrapping fails due to a mismatching
function prototype. Also add a missing `static` to the signature.
Change-Id: Ia927036ccd725550f1191890515578bc80c74f80
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/17704
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: Iaf208705d0cd450288af721d53053b2d3407a336
Found-by: Coverity Scan #1325836
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/17698
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Because of the varied environments that coreboot is built under, we
don't want to have symbolic links in the tree.
Change-Id: I4cf9d95a437626cb52e3032a5e6cba83320a334b
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17633
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
As devicetree files can have different name followed by extension cb
Exclude all .cb file from the license header check.
Change-Id: I37b651eedd77cbf3d3e65ff0f027f971b0a2d2ac
Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com>
Reviewed-on: https://review.coreboot.org/17186
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
- Show number of threads being used to build.
- Show the version number of each package when skipping it.
- Show whether the tool is a host or target build.
Change-Id: I1134c08b417a731859e6b25fe38aecf01a85927b
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17418
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
- All of the symbols are in the .config, so if .config is include in
the search all of the symbols are always found.
- There are now some Kconfig symbols in the Documentation directory,
so that needs to be excluded.
- 3rdparty has lots of Kconfig symbols that are unrelated to what
is being searched for.
Change-Id: I0ff56d0a0916338a8b94f5210b8e0b3be5194f41
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17588
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Don't search for symbols in the payloads directory, except for specific
files that are actively added back to the search.
Change-Id: I6f28dc7dee040b8061fa5644066f3613367b6d84
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17443
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Otherwise errors similar to "touch: cannot touch
'${TARGETDIR}/.GMP.6.1.0.success': No such file
or directory" might occur.
Change-Id: I4f24c93a25b7d567d3ce14a0415d20fd0778c9c8
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/17603
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Use a unique bus/device/function if a bay trail LPC bridge was found.
TEST=Run on MinnowBoard MAX Turbot and customer's LynxPoint-LP.
Change-Id: Ib4b50aaf9817ac94f46c28925081540676226d84
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/17464
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: I35c4340cf14ca1609ce3bfcac78cc4e286eff34a
Signed-off-by: Martin Roth <martinroth@chromium.org>
Reviewed-on: https://review.coreboot.org/17326
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: I33e41b745e7ec55ed39d7125fc74b1619d28bb54
Signed-off-by: Martin Roth <martinroth@chromium.org>
Reviewed-on: https://review.coreboot.org/17325
Tested-by: build bot (Jenkins)
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Previously, the .success file for each target didn't save the version,
of the package that was built. This created problems when someone
wanted to update to a new version and could not rebuild.
Change-Id: I9975b198ac4a7de8ff9323502e1cbd0379a1dbb8
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17417
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
- Return an error if the specified file could not be opened. To do this
cleanly, the return value was added.
- Since there's now a unified return value, use it where it makes sense.
- Don't return an error from --help. If you've asked for usage, it's
not an error.
Change-Id: I7c712d1e1927c2d4957b044b87ad26475b7a0e3b
Signed-off-by: Martin Roth <martinroth@chromium.org>
Reviewed-on: https://review.coreboot.org/17324
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Change-Id: I0ddb4516c03b0240d9134b35753ad901932d3f53
Signed-off-by: Martin Roth <martinroth@chromium.org>
Reviewed-on: https://review.coreboot.org/17323
Tested-by: build bot (Jenkins)
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
