| Age | Commit message (Collapse) | Author |
|---|
|
Platform has argument, but has_arg was mistakenly set to 0.
Change-Id: I7d5c31c2b1da544cb73d9e213d463332fcdba7df
Signed-off-by: Vojtech Vesely <vojtech.vesely@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80432
Reviewed-by: Jan Samek <jan.samek@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marvin Drees <marvin.drees@9elements.com>
|
|
This tool doesn't have a makefile, when trying to compile it manually
with the given instructions it even fails to compile after fixing the
paths in the given command, and it references the non-existing
PCI_BUS_SEGN_BITS Kconfig symbol, so just drop this.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8ca75db281a215bf3f194ab72a107f666dc0694e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79934
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The device IDs were taken from the 200 series datasheet (page 24).
Change-Id: I34b5cb61dd7b561778cc8506858cd436e6f04f9a
Signed-off-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80419
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
GMP and IASL don't compile with the default compiler and linker flags:
- GMP's check for the MacOS architecture hard coded x86_64 but it also
needs to know about arm64.
- iasl does some trickery on pointer alignment to save space(?), so we
need to tell clang about it.
Change-Id: If4cca9d3e55051a6121d992e5320bee1df17af9f
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80435
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Just a memory leak fix in Linux 6.7.
Change-Id: I1ff302dafa01e78429a30ff18e21ffe0b45ce46e
Signed-off-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80263
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
This patch switches the cbmem utility from its own IP checksum
implementation to the commonlib version (which is good because the old
one had a couple of bugs: doesn't work on odd sizes and may overflow
its carry accumulator with input larger than 64K).
Change-Id: I0bef2c85c37ddd3438b7ac6389e9daa3e4955b31
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80256
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds support for the new command-line option `-E` to
the ifdtool, which enables users (primarily factory users) to
protect GPR0.
Additionally, this patch refactors some code while adding support for
enabling GPR0 protection.
For more information on the scope of GPR0 (General Protection Range 0),
please refer to the Intel Meteor Lake-U Type 4 Client Platform SPI
Programming Guide, Document Number 768150.
BUG=b:270275115
TEST=Able to test GPR0 protection on google/rex and google/yahiko.
> ifdtool -p mtl -E image.bin -O image.bin_lock
...
Value at GPRD offset (64) is 0x83220004
--------- GPR0 Protected Range --------------
Start address = 0x00004000
End address = 0x00322fff
...
GPR0 protection is now enabled
Change-Id: I27c533ae4109c79299f4e7ff75e750d7cc64280f
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80235
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
|
|
This renames bus to upstream and link_list to downstream.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I80a81b6b8606e450ff180add9439481ec28c2420
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78330
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
GCC_OPTIONS is only used for target specific options right now,
so rename to TARGET_GCC_OPTIONS and only use them in the
non-bootstrap build.
Adapt BINUTILS_OPTIONS for consistency, even though it doesn't
have the same problem.
Change-Id: I5e4f54b758dd7daf4e69101c19dfa1212fa64cf6
Signed-off-by: Patrick Georgi <patrick@georgi.software>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80229
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Id86ebc20cf5af5b65812c3f09235d0cba86d13f2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80126
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Multiple links are unused throughout the tree and make the code more
confusing as an iteration over all busses is needed to get downstream
devices. This also not done consistently e.g. the allocator does not
care about multiple links on busses. A better way of dealing multiple
links below a device is to feature dummy devices with each their
respective bus.
This drops the sconfig capability to declare the same device multiple
times which was previously used to declare multiple links.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: Iab6fe269faef46ae77ed1ea425440cf5c7dbd49b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78328
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jincheng Li <jincheng.li@intel.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
This patch refactors GPR0 unlock function to add few important
logic as below
1. Perform GPR0 unlock if GPR0 is locked.
2. While unlocking dump the GPRD PCH strap details
3. Additionally, print the GPR start and end range if GPR0
protection is enabled.
TEST=Able to test GPR0 protection on google/rex and google/yahiko.
Exp 1: Trying to unlock GPR0 protection for a locked image
> ifdtool -p mtl -g image.bin -O image.bin_unlock
File image.bin is 33554432 bytes
Value at GPRD offset (64) is 0x83220004
--------- GPR0 Protected Range --------------
Start address = 0x00004000
End address = 0x00322fff
Writing new image to image.bin_unlock
Exp 2: Trying to unlock GPR0 protection for a unlocked image
> ifdtool -p mtl -g image.bin_unlock -O image.bin_unlock
File image.bin_unlock is 33554432 bytes
GPR0 protection is already disabled
Change-Id: Id35ebdefe83182ad7a3e735bdd2998baa0ec3ed7
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80216
Reviewed-by: YH Lin <yueherngl@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ib69236fb5d68272f92405512dc231fa75ecccaa6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80125
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ieaf7894f49a90f562b164924cc025e3eab5a3f7f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80129
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ib77cb3a0852092ac414fe0160fe10d6e58fcf660
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80127
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
The .inc suffix is confusing to various tools as it's not specific to
Makefiles. This means that editors don't recognize the files, and don't
open them with highlighting and any other specific editor functionality.
This issue is also seen in the release notes generation script where
Makefiles get renamed before running cloc.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I2a6a4d1eb7e0d0cd32c8690caf3eff340cdb0d8c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80124
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
The .inc suffix is confusing to various tools as it's not specific to
Makefiles. This means that editors don't recognize the files, and don't
open them with highlighting and any other specific editor functionality.
This issue is also seen in the release notes generation script where
Makefiles get renamed before running cloc.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I434940ebb46853980596f7ad55d27a62c90280fa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80123
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Make sure that any new files generated get the Makefile.mk name.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I3880d5911ff8de01751befdffc99ba5a961416f7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80113
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Now that the files are renamed, make sure all references to Makefile.inc
are updated as well.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I09e235eecf0c32c80a41bfcbbd3580cce6555e10
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80112
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
The .inc suffix is confusing to various tools as it's not specific to
Makefiles. This means that editors don't recognize the files, and don't
open them with highlighting and any other specific editor functionality.
This issue is also seen in the release notes generation script where
Makefiles get renamed before running cloc.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ie7038712de8cc646632d5e7d29550e3260bf2c62
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80103
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The .inc suffix is confusing to various tools as it's not specific to
Makefiles. This means that editors don't recognize the files, and don't
open them with highlighting and any other specific editor functionality.
This issue is also seen in the release notes generation script where
Makefiles get renamed before running cloc.
The rest of the Makefiles will be renamed in following commits.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Idaf69c6871d0bc1ee5e2e53157b8631c55eb3db9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80063
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Reformat alternate dump output to show default values before read
values, and to use brackets to visually indicate which values differ
from the defaults.
old output:
Register dump:
idx val def
0x07: 0x0b (0x00)
0x10: 0xff (0xff)
0x11: 0xff (0xff)
...
new output:
Register dump:
idx def val
0x07: 0x00 [0x0b]
0x10: 0xff 0xff
0x11: 0xff 0xff
...
TEST=build/dump registers from Erying SRMJ4 w/Nuvoton NCT6796D.
Change-Id: Idef2cc136151328b114620eb297ab8fd62b71bcd
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80004
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Registers and default values taken from public datasheet:
https://www.nuvoton.com/resource-files/NCT6796D_Datasheet_V0_6.pdf
TEST=build/dump SIO registers on Erying SRMJ4 mainboard
Change-Id: I0ff940a17b0c38a5ca66e90dd4e075a2b04dcfc1
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80003
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add PCI IDs and descriptor strings to support the integrated
north/south bridges and GPU for the i9-13900H CPU.
---
CPU: ID 0xb06a2, Processor Type 0x0, Family 0x6, Model 0xba, Stepping 0x2
Northbridge: 8086:a706 (13th generation (Raptor Lake H family) Core Processor)
Southbridge: 8086:519d (Raptor Lake)
IGD: 8086:a7a0 (Intel(R) Iris Xe Graphics [RPL-P])
SBREG_BAR = 0xfd000000 (MEM)
---
TEST=build/run inteltool on Erying SRMJ4 mainboard, verify
PCI IDs not unknown, GPIOs dumped.
Change-Id: I4cf3f419f103a1a7d4c6850f2257b7e7d45f3b18
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79962
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Currently autoport fills in USB current '0' if the detected setting
isn't one of the known settings. This works as 0 is a valid setting
from C point of view, but it's not supported on desktop PCs and on
mobile platform results in the lowest possible USB PHY gain. Thus
this might cause instabilities as the original firmware had stronger
USB drive currents and gain settings.
Add more known USB current fields to the map and generate a FIXME
as comment when the detected current isn't one of the known entries
instead of defaulting to 0.
Change-Id: I48f4d636ce3401ba188f5519b5ff45fccf13f080
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78828
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Always use the high-level API region_offset() and region_sz()
functions. This excludes the internal `region.c` code as well
as unit tests. FIT payload support was also skipped, as it
seems it never tried to use the API and would need a bigger
overhaul.
Change-Id: Iaae116a1ab2da3b2ea2a5ebcd0c300b238582834
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79904
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
SOUTH_BRIDGE_OPTIONS Kconfig symbol is no longer used.
Change-Id: I2380f1ce48afd191755d8b3dcab0b51909f5231f
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79913
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
As per Intel Meteor Lake SPI programming doc, the BIOS region should
have a read access enabled for device expansion 2 region
(aka region 9).
This patch ensures that BIOS region is able to read the device
expansion 2 region for Intel Meteor Lake platform as known as
SPI padding region.
BUG=b:274356894
BRANCH=firmware-rex-15709.B
TEST=Able to flash screebo AP FW image using flashrom on DUT.
Without this patch:
> flashrom -p internal -r /tmp/bios.rom
flashrom 1.4.0-devel on Linux 6.1.67-09255-ge8ae3115f8b0 (x86_64)
...
...
Found Winbond flash chip "W25Q256JW_DTR" (32768 kB, Programmer-specific)
on internal.
Reading flash... Transaction error between offset 0x0072f000 and
0x0072f03f (= 0x0072f000 + 63)!
read_flash: failed to read (0x72f000..0x7fffff).
Read operation failed!
FAILED.
FAILED
With this patch:
> flashrom -p internal -r /tmp/bios.rom
flashrom 1.4.0-devel on Linux 6.1.68-09294-g001fdda5287d (x86_64)
...
...
Found Winbond flash chip "W25Q256JW_DTR" (32768 kB, Programmer-specific)
on internal.
Reading flash... done.
SUCCESS
Change-Id: I18c44aa9a0f890f01a889247da118b69a58936e8
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79902
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
A following error occurred when I commit, it seems that the extra `\`
after `\.md$` is unnecessary.
File Binary file src/mainboard/google/guybrush/data.apcb matches has
lines ending with whitespace.
File Binary file src/mainboard/google/skyrim/data.apcb matches has
lines ending with whitespace.
File Binary file src/mainboard/google/zork/data.apcb matches has
lines ending with whitespace.
test failed
Signed-off-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com>
Change-Id: I315a37ccc3c6ebb67f7a250402549761c699dd1b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79782
Reviewed-by: cong yang <yangcong5@huaqin.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
Platforms from CNL onwards support up to 16 flash regions, not 12. The
permissions for regions [15:12] are stored in extended region
read/write access fields in the FLMSTR registers. Currently ifdtool
treats these fields as reserved, so they're not modified when locking or
unlocking.
Add support for extended regions so that they are locked/unlocked by the
--lock/--unlock options. This will make the locked/unlocked descriptors
generated by ifdtool match those generated by mFIT.
BUG=b:270275115
TEST=Without this change:
`ifdtool -lr -p adl` on unlocked image:
Before:
00000080 ff ff ff ff ff ff ff ff ff ff ff ff 00 00 00 00
00000090 ff ff ff ff
After:
00000080 ff 07 20 00 ff 05 40 00 ff 00 00 00 00 00 00 00
00000090 ff 00 00 00
`ifdtool -u -p adl` on locked image:
Before:
00000080 00 07 20 00 00 05 40 00 00 00 00 00 00 00 00 00
00000090 00 00 00 00
After:
00000080 00 ff ff ff 00 ff ff ff 00 ff ff ff 00 00 00 00
00000090 00 ff ff ff
With this change:
`ifdtool -lr -p adl` on unlocked image:
Before:
00000080 ff ff ff ff ff ff ff ff ff ff ff ff 00 00 00 00
00000090 ff ff ff ff
After:
00000080 00 07 20 00 00 05 40 00 00 00 00 00 00 00 00 00
00000090 00 00 00 00
`ifdtool -u -p adl` on locked image:
Before:
00000080 00 07 20 00 00 05 40 00 00 00 00 00 00 00 00 00
00000090 00 00 00 00
After:
00000080 ff ff ff ff ff ff ff ff ff ff ff ff 00 00 00 00
00000090 ff ff ff ff
Change-Id: Iaa43524d91c399a996ade56f2f613b4110a44aad
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79790
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
On ChromeOS devices with updateable CSE firmware, the GPR0 (Global
Protected Range) register is used to ensure the CSE RO is write
protected even when the FLMSTR-based protection is temporarily disabled
by coreboot to allow updating the CSE RW. For more details see
Documentation/soc/intel/cse_fw_update/cse_fw_update.md
Therefore to allow modifying the CSE firmware from the CPU, the
descriptor must have both the FLMSTR-based protection disabled (which
can be done using ifdtool --unlock), and GPR0 disabled.
Add an ifdtool option for disabling GPR0. For now I've added support for
all platforms for which I have the SPI programming guide. Support for
more platforms can be added in the future if needed.
BUG=b:270275115
TEST=Run `ifdtool -p adl -g image.bin -O image-unlocked.bin` on a locked
craask image, check the GPR0 field is set to 0.
Change-Id: Iee13ce0b702b3c7a443501cb4fc282580869d03a
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79788
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The package 'bluezFull' got superseded by 'bluez'. So just remove the
related line since 'bluez' is the default.
Change-Id: Ibf72c37205017b27012064b311a9510136351c0f
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79416
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marvin Evers <marvin.n.evers@gmail.com>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
|
|
Following commands were used to test if everything builds:
* make crossgcc
* make clang
* make what-jenkins-does
Change-Id: I8d04c570f91215f534f173db2ae559b64b58012f
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79316
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
|
|
Use same indent levels for switch/case in order to comply with the
linter.
Change-Id: I2dd0c2ccc4f4ae7af7dd815723adf757244d2005
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79448
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
.apcb files are binary configuration data and not human readable;
exclude them from license, newline, and whitespace checks.
Change-Id: Idc1ddd5067cb97ef8b5758a0b8bf040d1e421871
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79589
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
To quote its repo[0]: Wuffs is a memory-safe programming language (and
a standard library written in that language) for Wrangling Untrusted
File Formats Safely. Wrangling includes parsing, decoding and encoding.
It compiles its library, written in its own language, to a C/C++ source
file that can then be used independently without needing support for
the language. That library is now imported to src/vendorcode/wuffs/.
This change modifies our linters to ignore that directory because
it's supposed to contain the wuffs compiler's result verbatim.
Nigel Tao provided an initial wrapper around wuffs' jpeg decoder
that implements our JPEG API. I further changed it a bit regarding
data placement, dropped stuff from our API that wasn't ever used,
or isn't used anymore, and generally made it fit coreboot a bit
better. Features are Nigel's, bugs are mine.
This commit also adapts our jpeg fuzz test to work with the modified
API. After limiting it to deal only with approximately screen sized
inputs, it fuzzed for 25 hours CPU time without a single hang or
crash. This is a notable improvement over running the test with our
old decoder which crashes within a minute.
Finally, I tried the new parser with a pretty-much-random JPEG file
I got from the internet, and it just showed it (once the resolution
matched), which is also a notable improvement over the old decoder
which is very particular about the subset of JPEG it supports.
In terms of code size, a QEmu build's ramstage increases
from 128060 bytes decompressed (64121 bytes after LZMA)
to 172304 bytes decompressed (82734 bytes after LZMA).
[0] https://github.com/google/wuffs
Change-Id: If8fa7da69da1ad412f27c2c5e882393c7739bc82
Signed-off-by: Patrick Georgi <patrick@coreboot.org>
Based-on-work-by: Nigel Tao <nigeltao@golang.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78271
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When using the --skip_set and --skip_unset arguments, the config line
looked like a statement that the build was being skipped instead of
abuild just printing the configuration.
This updates those config statements to better show that it's the
config and not stating that this particular build is being skipped.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I6cc59f9b33dcda51aeb3640d449037a0aa054e36
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76936
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Following commands were used to test if everything builds:
* make crossgcc
* make clang
* make what-jenkins-does
Change-Id: Iab15fe908aa6ca81724ed7557caf70c38817ad25
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79389
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Zebreus <lennarteichhorn@googlemail.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Following commands were used to test if everything builds:
* make crossgcc
* make clang
* make what-jenkins-does
Change-Id: I60e00932332801c0f62d88b7860afb330d9469e4
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79384
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Zebreus <lennarteichhorn@googlemail.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Rename Dockerfile to Dockerfile.base since additional Dockerfiles basing
on this one will be added later.
Change-Id: I70f2c89f739068749e1017524b6f8ef1b03d6456
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79344
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Zebreus <lennarteichhorn@googlemail.com>
|
|
Following commands were used to test if everything builds:
* make crossgcc
* make clang
* make what-jenkins-does
Change-Id: I757e6dbac557bcb640777b819529a978bf54ed93
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79314
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Zebreus <lennarteichhorn@googlemail.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Integration for additional container images might be added to the
Makefile at some later point. However, in order to build and test new
images just add a simple script which fulfills that requirement until
then.
Change-Id: Ibd0a6d59f395e074c784452849650d7f03b4f1d8
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79361
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Rename Dockerfile to Dockerfile.base since additional Dockerfiles basing
on this one will be added later.
Change-Id: I611feca234ae7600f9c17ae397f9f3903879c057
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79362
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Change-Id: I25396e5480c45729710b16345f997c78e8bcbccb
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79363
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Inteltool is GPLv2 licensed so all files that link to it should be GPLv2
by default. In addition, the contents of several of these headers were
originally moved directly from gpio_groups.c, which is explicitly marked
as GPL-2.0-only.
Change-Id: Ie897cb238c0c9e89fe677c999cbf1803f5f4609a
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78628
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
The "config" targets exist to edit the .config file, and so they
should be more forgiving with invalid configs (that they'll convert
into valid configs on save). They will still emit warnings about
invalid symbols, but not exit with an error.
The regular build process still fails if the .config looks unexpected
(for example when there's an unknown config flag).
Change-Id: If427e075766c68d493dd406609f21b6bb27d1d74
Signed-off-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79298
Reviewed-by: Mike Banon <mikebdp2@gmail.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
cmd and cmd_conf_cfg are necessary for `make menuconfig`
and `make nconfig`.
Change-Id: Ie16ef31a8e0137f3fd4129fb73ca6ef4669173cc
Signed-off-by: Patrick Georgi <patrick@georgi.software>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79264
Reviewed-by: Mike Banon <mikebdp2@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Upstream reimplemented KCONFIG_STRICT, just calling it KCONFIG_WERROR.
Therefore, adapt our build system and documentation. Upstream is less
strict at this time, but there's a proposed patch that got imported.
TEST=`util/abuild/abuild -C` output (config.h and
config.build) remains the same. Also, the failure type fixed in
https://review.coreboot.org/c/coreboot/+/11272 can be detected,
which I tested by manually breaking our Kconfig in a similar way.
Change-Id: I322fb08a2f7308b93cff71a5dd4136f1a998773b
Signed-off-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79259
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
This follows commit c79e96b4eb3 which did the rename across the tree
except in these places. Remove the flag from CHROMEOS abuild builds
because it never really belonged there.
Change-Id: If98fa27f64d6b676d3edf68ba6fbaacf7ac422e4
Signed-off-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79258
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Changelogs:
* https://gcc.gnu.org/gcc-12/changes.html
* https://gcc.gnu.org/gcc-13/changes.html
Porting guides:
* https://gcc.gnu.org/gcc-12/porting_to.html
* https://gcc.gnu.org/gcc-13/porting_to.html
Change-Id: I4f2ed4de4811abaa13528906de71eee29a8f2910
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Signed-off-by: Nico Huber <nico.h@gmx.de>
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70771
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
TEST=`util/abuild/abuild -C` output (config.h and config.build) remains
the same
Change-Id: If717d064d87b0045f276a4ee963db0a62230f5d8
Signed-off-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79182
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
TEST=`util/abuild/abuild -C` output (config.h and config.build) remains
the same
Change-Id: Idbcd88165271b58ba3697c66df447af0b8b57b1b
Signed-off-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79181
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Minor bugfix, plus stuff that doesn't really affect us.
TEST=`util/abuild/abuild -C` output (config.h and config.build) remains
the same
Change-Id: I0af0c2ae4cb11bb58457830ffcd8bb8c2422a3d1
Signed-off-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79180
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The upstream build system uses a newly introduced function `read-file`,
so copy that in from Linux 6.2.
TEST=`util/abuild/abuild -C` output (config.h and config.build) remains
the same
Change-Id: Ic100bf189ebd3eaa0eb26904ae8602910329a180
Signed-off-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79179
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
This also cleans up our patch queue.
TEST=`util/abuild/abuild -C` output (config.h and config.build) remains
the same
Change-Id: I79159130ba3515ede59e9fb9fbf087e2ed76257a
Signed-off-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79203
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Add more packages which are useful for a coreboot development and build
environment and also make neovim the default editor.
Change-Id: Ied09a9b9500d85348fc9c3862247bd8b85e50b54
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77724
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I4dbe9b7a05171bb244ec1ebe6ce7d390a6373d61
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78883
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
ChromeOS has switched to using the main branch, update accordingly.
BUG=b:294218930
TEST=None
Change-Id: I31f67ef4fb175a4e4896b5bed81d5ae1cdddb827
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79143
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
While having select statements in Kconfig.name files is valid in the
syntax of the Kconfig language, having the selections split between the
normal Kconfig file and Kconfig.name files makes it harder to see what's
going on.
Kconfig.name files will now be limited to their original purpose of
selecting a particular board or board variant, not actually configuring
that board.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I2aab78e296f2958e77a938b1afa40a25a6aa82b0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78972
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
These perl modules are needed to run the coverage-report target for
gcov.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: If32a42ce17edcbae94394f770c26d3300abebcbe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79072
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Leaving the user as coreboot caused the entrypoint to run as coreboot,
which means we couldn't mount directories or run sshd correctly.
Switching to root at the end of the file fixes this.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ie10e1d7ad4def0faafe3bcd580a77e23c3bfe948
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79067
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Some boards (e.g. prodrive/hermes) that do not provide their own FMAP
and therefore have been generated by the build system (+ ifdtool)
experience a failure when trying to build with an IFD that contains
regions which do not have equivalent fmap names (set to NULL).
Therefore add a NULL check for the fmapname and ignore the region if we
do not have an fmapname.
Test: compile prodrive/hermes
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: Ib4589b7fdbd11d644214ca5601536e9aeb26882f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79010
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
To see which Kconfig symbols are actually used, and to verify that
they're used correctly, kconfig_lint scans the C code. It gives an error
if it sees a CONFIG(symbol) where the symbol doesn't exist.
This creates a problem when a C preprocessor macro is created to match
multiple Kconfig symbols. The simple solution here is to just ignore
those C preprocessor macro definitions as beyond the scope of this
linter.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I5a20e8bb5a3e19e380802cba712d6dd3ff2f4dc0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78681
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Instead of installing the pip modules system-wide, and possibly causing
conflicts, install them into a virtual environment for the coreboot
user.
If we wanted to, in the future, we could install different versions of
the modules into different virtual environment directories to allow
for testing or anything else we needed.
Change-Id: I49c749a13a698bfb7af29bf07e42ac14b67b2ae7
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79006
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
The branch for the encapsulate tool accidentally got caught up in the
switch from master to main. The default branch for this tool has not
changed, so still needs to be referenced as master.
Change-Id: I0ff47308dcbf30888e4e88637bab63f20467307a
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79005
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
The builds from the configs directory were not being saved in the
junit.xml files that Jenkins uses to determine pass vs fail of the
individual builds.
This also fixes the path to a log file that I noticed while testing.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I37dbee676cc9e507e612ce66994a04aba062757a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78863
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The latest updates to Vboot use libnss, so add the library to the
coreboot sdk.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Iee0c44296b189b5327ef8f950b1bba9eb668f298
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78867
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
gnatgcc is deprecated and in recent GCC releases its purpose is
fulfilled by the gcc binary. In case of a deprecated gnatgcc version is
installed, it doesn't provide the expected output and hostcc_has_gnat1()
fails. In this case, just set the value of CC to gcc.
It's still required to install GNAT in addition to GCC.
Change-Id: I730bdfda81268d10bd2a41ef5cb4e3810b76a42c
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78215
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Somehow two words slipped in here where the "bad" and "good" spellings
are the same, which doesn't make sense. Remove them.
Change-Id: I9b53ce8538616c164efb4eb25ff859975ddadfd2
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78822
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
This was reverted via commit 9ab3a1fe4a1d and causes unapply to fail
so we adjust the patch to preserve the original return value.
Change-Id: I5ad2180854e0263d2d097b059cb16ec478b859c5
Signed-off-by: Richard Marko <srk@48.io>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78442
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I0c47a603cc6e6174cd4895ff9f44b5bc242c653e
Signed-off-by: Richard Marko <srk@48.io>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78441
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Adds commit 48ad5c23680c util/kconfig: chmod +w before savedefconfig
to quilt patch series.
Change-Id: I381dce2fee995227efc60169fd90ab505c99b74b
Signed-off-by: Richard Marko <srk@48.io>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78440
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This prevents a headscratcher when .config in root doesn't have a write
permission bit set which causes a build failure of savedefconfig
not able to write to copied file, for example
*** Error while saving defconfig to:
build/mainboard/emulation/qemu-i440fx/cbfs-file.eU5E0t.out.tmp2
Change-Id: I2e7d35c9f6e8add3e7438d163850bc5fda5a99b2
Signed-off-by: Richard Marko <srk@48.io>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78415
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
In the unlikely but possible event where the name of the CBFS file is
longer than 232 characters, `cbfs_create_file_header()' would overflow
the buffer it allocated when it copies the CBFS filename.
Change-Id: If1825b5af21f7a20ce2a7ccb2d45b195c2fb67b0
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78500
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
The flag activates some Win32 compatibility quirks and on
clang/openbsd it enables so many of them that the code doesn't compile
anymore. Therefore move it into the "Win32 area" in that Makefile.
Change-Id: Ic77c04941e40a568f1d74cec09eb3d22a66e69b0
Signed-off-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78724
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I97756f603e304c6b50387ba2aaac416ae31db681
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78493
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
The linker can make relocation entries of a symbol which has a value
of zero point to the undefined symbol entry. It is permitted since
when the symbol value is zero as the documentation of the relocation
entry `r_info' field states:
"If the index is STN_UNDEF, the undefined symbol index, the relocation
uses 0 as the symbol value."
The ELF binary does not really have any missing symbols. It is an
optimization as the symbol points to the undefined symbol because its
value is zero.
A typical way to hit this cbfstool limitation is to define an empty
region using the REGION macro in the linker script. Here is an
example if we assume `CONFIG_MY_REGION' is set to 0:
.car.data {
[...]
REGION(my_region, CONFIG_MY_REGION_SIZE)
[...]
}
A region is defined as follow:
#define REGION_SIZE(name) ((size_t)_##name##_size)
#define DECLARE_REGION(name) \
extern u8 _##name[]; \
extern u8 _e##name[]; \
extern u8 _##name##_size[];
So the size of the region is actually the address of the
`_##name##_size' symbol. Therefore, the `_my_region_size' symbol
address is zero and the linker can make the relocation entry of this
symbol point to the undefined symbol index.
In such a situation, cbfstool hits a segmentation fault when it
attempts to relocate the symbol in `parse_elf_to_xip_stage()'
function. We resolves this issue by making cbfstool skips relocation
entries pointing to the undefined symbol similarly to the way it skips
relocation relative to absolute symbols. A symbol which value is zero
can be considered an absolute symbol and therefore should not be
relocated.
Of course, we could argue that we could just prevent the declaration
of an empty region as illustrated in the following example:
.car.data {
[...]
#if CONFIG_MY_REGION_SIZE > 0
REGION(my_region, CONFIG_MY_REGION_SIZE)
#endif
[...]
}
However, this is not a satisfying solution because:
1. It requires to add unnecessary code in the linker script as an empty
region is a valid declaration. Such a workaround requires the code
using it to mark the region symbols as weak symbols to handle the
situation where the region is not defined.
2. There could be other situations which have yet to be uncovered which
would lead the same cbfstool crash.
3. A binary with an empty region is a valid ELF file and cbfstool
should not crash when it is asked to create an eXecute-In-Place stage
out of it.
Change-Id: I2803fd3e96e7ff7a0b22d72d50bfbce7acaeb941
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77699
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
XFS is barely used. In order to save some space, drop it from the
package list.
Change-Id: Ic1cc567eb3f555bdf5567f3d036c84ce58691128
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78400
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Bump to 23.05 and also rename settings in order to compliant with newest
namespaces and names.
Change-Id: I4a23466bef5c45ebb82d92038ec2595103c984d3
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78399
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
This script lists all new commits from users with few merged commits.
By default, it looks at the last week, and considers anyone with fewer
than 5 commits merged to be a new user.
Currently the only command line argument that's accepted is the gerrit
username of the person running the query. To modify any of the other
options, the values hard-coded into the script need to be updated.
To keep down the number of repeated queries, the script saves lists of
users considered to be experienced, as well as the commits from new
users that it lists.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ic698798f3fddc77900c8c4e6f8427991bda3f2d1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78184
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nicholas Chin <nic.c3.14@gmail.com>
|
|
Check for pkg-config presence and fail out with actionable message.
BUG=b:302521446
TEST=Build successfully with working pkg-config and failed build with no
pkg-config
Change-Id: I5d604145c919e7f71680d1e095dc68cb21868319
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78191
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
The `SDK_VERSION` was incorrectly set to itself instead of keeping the
`COREBOOT_IMAGE_TAG` variable, leaving it as an empty string.
Test: Run `make coreboot-sdk` and see `SDK_VERSION` matches the tag.
Fixes: d3a89cdb749a ("util/docker: Replace use of sed with build args")
Change-Id: I4c8be7d0f7c1ac82da397e720d13a7075f22ec4d
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78141
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Since commit 9b186e0ffef4 ("util/xcompile: Add NASM to xcompile") NASM
from the coreboot toolchain is properly hooked up to the build system.
So it's not needed to install the distro package. Remove it.
Change-Id: I2ab0317531e25ae6d5baa8be8ac4d41dc145658f
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77728
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Support generating Jasper Lake GPIO configuration from inteltool logs
Change-Id: I519d27e0c91c8d9159224d9bc1c6e49c83270b7a
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78093
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maxim <max.senia.poliak@gmail.com>
|
|
Revise the Makefile.inc rules for generating FMD parser files.
- lex: If --header-file is supported then the lex (usually flex) should
also support '-o' so we don't need to do redirection (-t).
- yacc: Bison is already required by bincfg and sconfig so we
can change the default parser compiler to Bison. That also
allows us to use -o and --defines to override the output files.
- both: Line directives are only helpful when debugging the scanner and
the parser, so we should remove them to get better git diff
results (-L for lex, -l for bison).
Also regenerated the shipped files with latest version of flex (2.6.4)
and bison (3.8.2).
Change-Id: I15b58ff65dcd9f3f3a6095aa004091ff733ffec3
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75851
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
The mapped windows is up to 16M. Even if the flash size is 32MB, it is
not mapped at 0xFE000000.
So using "0xFFFFFFFF - rom_size + 1" to get the "rom_base_address" can
only explain well when rom_size is less or equal to 16MB. For larger
size, it is not physically correct (Even though it can get expected
result).
If the flash size is larger than 16M, we assume the given addresses
are already relative ones. So we don't need the physical base address
any more.
This commit is part of a series of patches to support 32/64M flash.
BUG=b:255374782
Change-Id: I9eea45f0be45a959c4150030e7e213923510ad68
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72959
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Besides fw.cfg, each combo entry needs dedicated APCB files. If no new
APCB is provided, the main APCB is used for all entries.
The combo is fully supported after this.
Change-Id: I21c2bf7d98ded43848ae8a8bb61d1ded1a277f88
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58620
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
There is a technical debt in ChromeOS flashrom, `cros_alias.c`, which
is to work around ChromeOS calling flashrom with `-p host` instead of
`-p internal`.
Replace all `-p host` occurrences with `-p internal`.
BUG=b:296978620
TEST=none
Signed-off-by: Hsuan Ting Chen <roccochen@chromium.org>
Change-Id: I81674213b9a21598002f349ced1130f0844841ca
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77865
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
The primary branch changed names. To remain robust, just use HEAD,
which will point to whatever is authoritative.
Change-Id: I809ea748a5e51f4eea6bc227fa1fc5c8b07fe2ef
Signed-off-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78015
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Fails to build on musl libc as pci/types.h expects "POSIX types", which
are not implemented, instead of stdint.h when using pre-C99 versions.
Change-Id: Id1cf5bd72a0b4d76c87dc62c443d02df18ddd3fe
Signed-off-by: Nicholas Sudsgaard <devel@nsudsgaard.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77791
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For x86 eXecute-In-Place (XIP) pre-memory `.data` section support, we
have to use an extra segment as the VMA/LMA of the data is different
than the VMA/LMA of the code.
To support this requirement, this patch makes cbfstool:
1. Allow the load of an ELF with an extra segment
2. Makes add-stage for XIP (cf. parse_elf_to_xip_stage()) write its
content to the output binary.
To prevent the creation of unsuitable binaries, cbfstool verifies that
the LMA addresses of the segments are consecutives.
TEST=XIP pre-memory stages with a `.data` section have the `.data`
section covered by a second segment properly included right after
the code.
Change-Id: I480b4b047546c8aa4e12dfb688e0299f80283234
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77584
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For x86 eXecute-In-Place (XIP) .data section support, cbfstool need to
to skip relocation of the .data section symbols in addition to
.car.data section symbols.
To support this requirement, this patch makes the `-S` option take a
multiple section names separated by commas.
TEST=With `-S ".car.data .data"`, XIP pre-memory stages with
a `.data` section do not have any of the `.car.data` or `.data`
section symbols relocated.
Change-Id: Icf09ee5a318e37c5da94bba6c0a0f39485963d3a
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77560
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
This will be needed to switch over to main branch in coreboot
Change-Id: I90fadf2352d56074ce8b58d559a73b0c53fac14b
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75782
Reviewed-by: Patrick Georgi <patrick@coreboot.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In preparation for switching over coreboot.
Change-Id: Id66f0def84b913fc8fdd4ee77fef996e45dbd4f5
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75780
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This is only needed once we want to recreate the docker
Change-Id: I493acb4de615508b08826f814ef6ac1b37cbdf0c
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75781
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Iea1a7e61b60c4bf04be2fed9c503eaf7e20fe462
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75783
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
... so we can switch coreboot over.
Change-Id: Ib0487014fd49829e0d021533b04df9e8bd1a757a
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75779
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nicholas Chin <nic.c3.14@gmail.com>
|
|
Change-Id: I9ab101e06ed670dfe6802f9bd0df128d056446db
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77540
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
We don't have file for the fuse chain, but we need to set the level
for some cases.
Change-Id: Idb546f761ae10b0d19a9879a9a644b788828d523
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77506
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
|
|
Change-Id: I1fb3630bf5e8a56ddcf6102faffde568134accc9
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77375
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
