| Age | Commit message (Collapse) | Author |
|---|
|
Change-Id: Ie0ee6511e91c0bf1ff2f4ca49b24e3e5a36a06f2
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48005
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
This patch adds the first stage of the new CONFIG_CBFS_VERIFICATION
feature. It's not useful to end-users in this stage so it cannot be
selected in menuconfig (and should not be used other than for
development) yet. With this patch coreboot can verify the metadata hash
of the RO CBFS when it starts booting, but it does not verify individual
files yet. Likewise, verifying RW CBFSes with vboot is not yet
supported.
Verification is bootstrapped from a "metadata hash anchor" structure
that is embedded in the bootblock code and marked by a unique magic
number. This anchor contains both the CBFS metadata hash and a separate
hash for the FMAP which is required to find the primary CBFS. Both are
verified on first use in the bootblock (and halt the system on failure).
The CONFIG_TOCTOU_SAFETY option is also added for illustrative purposes
to show some paths that need to be different when full protection
against TOCTOU (time-of-check vs. time-of-use) attacks is desired. For
normal verification it is sufficient to check the FMAP and the CBFS
metadata hash only once in the bootblock -- for TOCTOU verification we
do the same, but we need to be extra careful that we do not re-read the
FMAP or any CBFS metadata in later stages. This is mostly achieved by
depending on the CBFS metadata cache and FMAP cache features, but we
allow for one edge case in case the RW CBFS metadata cache overflows
(which may happen during an RW update and could otherwise no longer be
fixed because mcache size is defined by RO code). This code is added to
demonstrate design intent but won't really matter until RW CBFS
verification can be supported.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I8930434de55eb938b042fdada9aa90218c0b5a34
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41120
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
With the upcoming introduction of CBFS verification, a lot more CBFS
files will have hashes. The current cbfstool default of always printing
hash attributes when they exist will make cbfstool print very messy.
Therefore, hide hash attribute output unless the user passed -v.
It would also be useful to be able to get file attributes like hashes in
machine parseable output. Unfortunately, our machine parseable format
(-k) doesn't really seem designed to be extensible. To avoid breaking
older parsers, this patch adds new attribute output behind -v (which
hopefully no current users pass since it doesn't change anything for -k
at the moment). With this patch cbfstool print -k -v may print an
arbitrary amount of extra tokens behind the predefined ones on a file
line. Tokens always begin with an identifying string (e.g. 'hash'),
followed by extra fields that should be separated by colons. Multiple
tokens are separated by the normal separator character (tab).
cbfstool print -k -v may also print additional information that applies
to the whole CBFS on separate lines. These lines will always begin with
a '[' (which hopefully nobody would use as a CBFS filename character
although we technically have no restrictions at the moment).
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I9e16cda393fa0bc1d8734d4b699e30e2ae99a36d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41119
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This function name clashes with cbfs_walk() in the new commonlib CBFS
stack, so rename it to cbfs_legacy_walk(). While we could replace it
with the new commonlib implementation, it still has support for certain
features in the deprecated pre-FMAP CBFSes (such as non-standard header
alignment), which are needed to handle old files but probably not
something we'd want to burden the commonlib implementation with. So
until we decide to deprecate support for those files from cbfstool as
well, it seems easier to just keep the existing implementation here.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I37c7e7aa9a206372817d8d0b8f66d72bafb4f346
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41118
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This patch reduces some code duplication in cbfstool by switching it to
use the CBFS data structure definitions in commonlib rather than its own
private copy. In addition, replace a few custom helpers related to hash
algorithms with the official vboot APIs of the same purpose.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I22eae1bcd76d85fff17749617cfe4f1de55603f4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41117
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
|
|
Looks like the option is generally not compatible with
garbage collections.
Nothing gets inlined, for example is_smp_boot() no longer
evaluates to constant false and thus the symbols from
secondary.S would need to be present for the build to pass
even if we set SMP=n.
Also the addresses of relocatable ramstage are currently
not normalised on the logs, so util/genprof would be unable
dress those.
Change-Id: I0b6f310e15e6f4992cd054d288903fea8390e5cf
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45757
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The template for overridetree.cb includes HeciEnabled, which has
been removed from the CNL config struct, so remove it from the
overridetree.
BUG=b:174360951
TEST=`new_variant_fulltest.sh puff` succeeds
Signed-off-by: Paul Fagerburg <pfagerburg@google.com>
Change-Id: I87f67c53cc75d9ddd40b4960739180a95de6ecd6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48129
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
|
|
Fix build on Debian/jessie
Change-Id: I987e7a03441b40ab06ccd54a21e38aac81a1c28d
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48004
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Build using docker results in error: Makefile:86: *** missing separator.
Add space after ifeq.
Tested: Building Facebook FBG1701 binary.
Change-Id: Ib42abe966e67dac380173ec982c9f6bd4cf074cc
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47992
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Add MT53D512M64D4NW-046 WT:F memory part to LP4x global list of
available LP4x parts and to the global JSON file containing LP4x parts
and their characteristics.
BUG=b:172993397
TEST=none
Change-Id: I09c6eab640c169dbdb451964967d14a31e314496
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47980
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Rob Barnes <robbarnes@google.com>
|
|
Print whether the SOC supports TME/MKTME. If the SOC supports the
feature, print the status of enable and lock bit from TME_ACTIVATE
MSR. -t option prints this status.
Sample output:
If TME/MKTME is supported:
============= Dumping INTEL TME/MKTME status =============
TME supported : YES
TME locked : YES
TME enabled : YES
====================================================
If TME/MKTME is not supported:
============= Dumping INTEL TME status =============
TME supported : NO
====================================================
Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com>
Change-Id: I584ac4b045ba80998d454283e02d3f28ef45692d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45088
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The previous commit (that was not touching inteltool.h)
marking internal functions as static is commit 6faccd1f00
Tested on: FreeBSD 13.0-CURRENT r355582
Change-Id: I4aba72f39b528fd70451a4656fd6c835ff766e49
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37767
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Commit 82a30a134c (util/crossgcc: Retry package downloads on failure) caused a regression for curl users.
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Change-Id: I0d946b86baad3f6409a5042701808da307e5bcb7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47911
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Our current cbfstool has always added a compression attribute to the
CBFS file header for all files that used the cbfstool_convert_raw()
function (basically anything other than a stage or payload), even if the
compression type was NONE. This was likely some sort of oversight, since
coreboot CBFS reading code has always accepted the absence of a
compression attribute to mean "no compression". This patch fixes the
behavior to avoid adding the attribute in these cases.
Change-Id: Ic4a41152db9df66376fa26096d6f3a53baea51de
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46835
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I8694a154d48c5a718b27d4beb858942db0feb997
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45550
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: I1cc02355e3fea7eb9ad98be6396a492dbbdc47b2
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46379
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
- Update url for docker install instructions.
- Update docker-cleanall target to require verification.
- Update docker-jenkins-attach target to check for docker and
use docker variable.
- Update spaces to tabs in the docs targets.
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: Ic1e1a545024fe1fdc37d7d8c7e6f54f124d1697b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47342
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
For whatever reason, I've had buildgcc fail to download packages a
number of times. Adding 2 additional retries before failing helps
with that problem.
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: I060eaa5a0da955436169e2199c1c62044dcfd5ea
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47338
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Changes (https://nasm.us/doc/nasmdocc.html):
Version 2.15.05:
Correct %ifid $ and %ifid $$ being treated as true.
Add --reproducible option to suppress NASM version numbers and
timestamps in output files.
Version 2.15.04:
Correct the encoding of the ENQCMDS and TILELOADT1 instructions.
Fix case where the COFF backend (the coff, win32 and win64 output
formats) would add padding bytes in the middle of a section if a
SECTION/SEGMENT directive was provided which repeated an
ALIGN= attribute. This neither matched legacy behavior, other
backends, or user expectations.
Fix SSE instructions not being recognized with an explicit memory
operation size (e.g. movsd qword [eax],xmm0).
Change-Id: I3f9aa8e743f2dc50fce1ce68718c0ae17209a509
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44694
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This release added support for SMBus predefined names: _SBA, _SBI, _SBR,
_SBT and _SBW.
CB:44507 and CB:41735 needs this version.
Change log: https://acpica.org/node/184
Change-Id: I3559e5bd884db4dccdaa5ac7edba4faf57da7930
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45750
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
|
|
MR0 may not always be programmed in the training result registers. Thus,
do not rely on its values. Also account for per-channel differences.
Change-Id: Iaf3b545ea55735b46caf1bd62d5859f2b3efa159
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47750
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This field is only 4 bits wide.
Change-Id: I2cb746e98176d58fc5be423e18babdaa8801b096
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47749
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Change-Id: Ib156b16b874f74f58bd816071db3a7acf33c5aaf
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47817
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In order to allow override trees to hide/unhide a device copy
the hidden state to the base device. This allows a sequence
of states like:
chipset.cb: mark device 'off' by default
devicetree.cb: mark device 'hidden' (to skip resource allocation)
overridetree.cb: mark device 'on' for device present on a variant
BUG=b:159143739
BRANCH=volteer
TEST=build volteer variants with TCSS RP0 either hidden or on
and check the resulting static.c to see if the hidden bit is
set appropriately.
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Change-Id: Iebe5f6d2fd93fbcc4329875565c2ebf4823da59b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47197
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Iaaf9c96dd0ed8c31bb50350d37646ca08a1bbff0
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47587
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Simplify macro generation and fix up "DEEP,EDGE_SINGLE" bug introduced
by commit 7bb756f (util/intelp2m: Update macros). Also update legacy
macro comments.
Change-Id: Ie49874d4abbdc7d1a18d63a62ccbce970ce78233
Signed-off-by: Benjamin Doron <benjamin.doron00@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47314
Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change adds the following memory parts to LP4x global list of
available LP4x parts and to the global JSON file containing LP4x parts
and their characteristics.
1. H9HCNNNCRMBLPR-NEE
2. H9HCNNNFBMBLPR-NEE
3. MT53D1G64D4NW-046 WT:A
BUG=b:172751925,b:172781673,b:172782100,b:172781562
TEST=cd <path_to_coreboot_src>/util/spd_tools/lp4x &&
./gen_spd <path_to_coreboot_src>/src/soc/intel/tigerlake/spd \
global_lp4x_mem_parts.json.txt "TGL"
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I37702770f707fe078920694468552c5db59c478f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47350
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The compress and uncompress options don't have arguments and shouldn't
consume the next token. So replace required_argument with no_argument
for the two options.
Change-Id: Ib9b190f2cf606109f82a65d00327871d6ffb7082
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47573
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Both the help and the maxsize option had the same short option character
assigned. Change the short option for maxsize to m to fix this and to
make it consistent with the rest of the code.
Change-Id: Icac1a7d4906345c37a5c7bed2b4995fea25f860e
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47574
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Work on this SoC was abandoned and never finished. It's not really
usable in its current state, so let's get rid of it.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I23453e3e47ac336ab61687004470e5e79172cafe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47428
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Due to the phony dependency to check for openssl, vboot-futility
was always rebuilt, and because it was newer than coreboot-futility,
it was always copied over.
Do that in parallel often enough and you run into race conditions,
as we did on our builders. Mark check-openssl-presence as order-only
dependency so that it's executed (and can bail out) but doesn't force
regeneration of vboot-futility.
Change-Id: Ib7fb798096d423d6b6cba5d199e12fe5917c3b41
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47453
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Add the missing special function gpio pad groups for CNL-LP.
The groups and names are documented in the PCH EDS, in Linux
(linux/drivers/pinctrl/intel/pinctrl-cannonlake.c) and other places.
Also, see soc/intel/tigerlake for reference.
Change-Id: I0509552da6ffad395c2b89df1676e1903c783695
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45201
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Add the missing special function gpio pad groups for CNL-H.
The groups and names are documented in the PCH EDS, in Linux
(linux/drivers/pinctrl/intel/pinctrl-cannonlake.c) and other places.
Also, see soc/intel/tigerlake for reference.
Change-Id: Ib83aeef9f4b6aa174e61ccbd87fb7b6450ed773b
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45204
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Add the missing native functions for special gpio pads for CNL-H,
which are documented in the PCH EDS and other places.
Also, see soc/intel/tigerlake for reference.
Change-Id: I71339d66362d29806c91375c214e9fb84c989201
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45203
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The names of the GPIO_RSVD_* are documented in the PCH EDS, in Linux
(linux/drivers/pinctrl/intel/pinctrl-cannonlake.c) and other places.
Also, see soc/intel/tigerlake for reference.
Change-Id: Ifd6cabb646000c8dff695c5c4f7196b2779f1430
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45202
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Add the missing native functions for special gpio pads for CNL-LP,
which are documented in the PCH EDS and other places.
Also, see soc/intel/tigerlake for reference.
Change-Id: Iedb726aa3afdbbbedafb67f6b7668bf591c2b9b4
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45305
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The names of the GPIO_RSVD_* are documented in the PCH EDS, in Linux
(linux/drivers/pinctrl/intel/pinctrl-cannonlake.c) and other places.
Also, see soc/intel/tigerlake for reference.
Change-Id: I86c7159d9f48560c41efdfe49f162aef00499d13
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45200
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Add support for dumping GPIOs on Intel Lewisburg SKU C621A.
Tested=On OCP Delta Lake DVT, verify it executes successfully.
Change-Id: I58797914aa5816aedace094c179e832150ad5e2e
Signed-off-by: Jingle Hsu <jingle_hsu@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47163
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Use command below to change the variable globally.
sed -i "s/\<variable\>/variable_u/g" `grep variable -rl ./ \
--exclude-dir=build --exclude-dir=crossgcc`
BUG=b:171334623
TEST=Build
Change-Id: I056a76663e84ebc940343d64178c18cb20df01a3
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46840
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: Ia0a7dea89fdb69e01f0abe577488f26a5d2bd6ed
Signed-off-by: Benjamin Doron <benjamin.doron00@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45008
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: I3a3d187fc24ab752dfe61893c15561a92d009fe2
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46062
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ie4ce0f1fb3aea8f12dfae9e5d16589262e7d6ab0
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45895
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I3e3bcc2c9e1b3edfed1ce845c1603b2a9a2bb044
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46867
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This config tries to mimic the actual devices of a mainboard
with Intel's Q35 chipset. It provides a much better base to
test coreboot (e.g. its allocator) and payloads.
Change-Id: Id465016e37ee75628a55b9da68facb4ae0efe822
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46768
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Add some mechanics to automatically have a `qemu` make target for
supported configurations. So with a QEMU target selected in Kconfig,
one would ideally only have to run `make qemu` to test things.
There are some notable variables that can be set or adapted in
`Makefile.inc` files, the make command line or the environment.
Primarily for `Makefile.inc` use:
QEMU-y the QEMU executable
QEMU_CFG-y a QEMU config that sets the available default devices,
used to run more comprehensive tests by default,
e.g. many more PCI devices
For general use:
QEMU_ARGS additional command line arguments (default: -serial stdio)
QEMU_EXTRA_CFGS additional config files that can add devices
QEMU_CFG_ARGS gathers config file related arguments,
can be used to override a default config (QEMU_CFG-y)
Examples:
$ # Run coreboot's default config with additional command line args
$ make qemu QEMU_ARGS="-cdrom site-local/grml64-small_2018.12.iso"
$ # Force QEMU's built-in config
$ make qemu QEMU_CFG_ARGS=
Change-Id: I658f86e05df416ae09be6d432f9a80f7f71f9f75
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46767
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
It slightly helps debugging issues when you know what to look out for.
Change-Id: I21eafaf8291701316aa920e458ba74535121b0a1
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47103
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
We are implementing a mechanism in coreboot to update CSME firmware,
this requires coreboot to be able to read CSME region. Exposing the
CSME data is not an issue since the data stored by CSE is all encrypted.
This patch provides a command line option "-r" which will enable read
access to CSME region when locking.
Without this change, locking SPI regions using ifdtool will block BIOS
access to read/access CSME. This will cause failure since BIOS can't
read basic information such as CSME version.
TEST=Flashrom returns success while erasing the SI_ME region.
After rebooting the DUT, DUT boots into OS without any issues on
Drawlat EVT.
Signed-off-by: Usha P <usha.p@intel.com>
Change-Id: I1d9a8e17fba19b717453476fbcb7bcf95b278abe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46441
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
These were originally ignored only inside util/ but these files
shouldn't be tracked anywhere.
Change-Id: Ie0846bd8bdd6e52f420f9dd2e72a8a922102ff90
Signed-off-by: Patrick Georgi <patrick@georgi.software>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47012
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
We all knew this was coming, 32 bits is never enough. Doing this early
so that it doesn't affect too much code yet. Take care of every usage of
fw_config throughout the codebase so the conversion is all done at once.
BUG=b:169668368
TEST=Hacked up this code to OR 0x1_000_0000 with CBI-sourced FW_CONFIG
and verify the console print contained that bit.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I6f2065d347eafa0ef7b346caeabdc3b626402092
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45939
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
To verify the consistency, see if timeless builds with and without
this patch result in identical coreboot.rom files.
BUG=b:154032833
TEST=Build & boot on mandolin
Change-Id: Icae73d0730106aab687486e555ba947796e5e757
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42859
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
core-ec will need it.
Change-Id: Id7d677a6f92ce266f893372a2540d77abb613707
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46940
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
There's no need for the global list of files to ignore, so use git's
ability to work with more local configuration.
Change-Id: I50882e6756cbc0fdfd899353cc23962544690fb3
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46879
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This will let you at least dump / add these regions.
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Change-Id: I195ba5e93823603e712cd16cecbb48141302bed6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46822
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
|
|
The linters touch every file under src and probably util. This makes
it difficult to see what files have been accessed by the builder.
The JENKINS_SKIP_LINT_TESTS variable will only be set on the jenkins
build that looks for unused files.
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: I12fa31641c2a72c5e07be1c4958467f7165f21bb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46807
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This matches the what-jenkins-does target.
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: I20b455e0161dcebf2eb9022bd142bbec99937a19
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46806
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
- The ccache files don't need atime.
- Enable strict atime for the git repos. This will help find unused
files.
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: I94bcc55ea5c5a74f3ad0292ca50b74874a0d920d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46804
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Jenkins has changed the name of the build directory, so it's not
currently building out of memory, it's writing to the SSD. This
changes the build back to tmpfs.
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: Iefcf53757862feb2025aa5696f9f5dbce9dd70dd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46803
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This tests some of the basic targets that coreboot-sdk needs to be
able to run.
I was running most of these tests manually after creating the sdk
image, but adding it into the Dockerfile makes sure they get run.
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: I0d4a2ad82042733a7966edb8ccf927676618977c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46802
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Because docker saves a container for every run command, by breaking
the coreboot build into 3 commands, it greatly increased the size of
the docker containers needed. When combined as one run command, the
coreboot repo that is downloaded, along with the coreboot test build
are deleted before the container is created. Since those directories
are deleted in a later run command, they don't even make it into the
final container, and just force coreboot-sdk users to download extra
data for no reason.
While splitting the build may help with debugging failures when
creating the docker container, that debugging can be done locally by
splitting up a working copy.
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: Ia28ee4e22c0a76dc45343755c45678795308adca
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46801
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Even though both python2 and python3 are now installed to the SDK, the
default python program is not. This sets the default to python2.
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: I4220c316df86cb2481143a79fadb70fc734e6879
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46800
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
- cscope: Run cscope targets
- ctags: Run ctags targets
- pbzip2: Allow compression on all cpu cores
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: I31ca45fcc5880f2b0346ca3f7d36a71ae18da979
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46799
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
util/broadcom/secimage was removed in commit aea00f496b1, so don't
try to test it anymore.
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: Ibcc018a6b8ed4ecd407f2dc374cec62900920a92
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46805
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
These sources are built but not used by cbfstool. The only .c file in
commonlib/ it really needs is fsp_relocate.c. Get rid of the others.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I6ebbb4161874f6279b6dbaffe7c3144226a6f9b9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46253
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I12dc449e06dee31b4b0811ab23c6e8635cf31512
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46667
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Cosmetic fix:
$ sudo ./ectool -p
Cannot get EC ports from /proc/ioports, fallback to default.EC RAM:
Change-Id: Icc2b5bbbbfe7685e4fe512af029ce00b33a26daa
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46666
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Right now IGD is hard coded to 0:2.0 and if that
device is there, it is blindly used, even if it is
not a graphics device. Look at the PCI class to make
sure we're not using the wrong device.
Change-Id: Ia7f52071bd202e2960faba0f46e4fa5e14ad65f8
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46673
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: Ifed43d058c70f75d88e9f4b2b07527782ebcbac5
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46672
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Currently sconfig generates a `static.h` to accompany
`static.c`. However, some payloads may decide they would like to consume
the FW_CONFIG macros as well. The current state of `static.h` makes this
impossible (relying on `device/device.h`).
This patch splits up `static.h` into 3 files: `static.h,
`static_devices.h`, and `static_fw_config.h`. `static.h` simply includes
the other two `.h` files to ensure no changes are needed to other
code. `static_devices.h` contains the extern'd definitions of the device
names recently introduced to sconfig. `static_fw_config.h` contains the
FW_CONFIG_FIELD_* macros only, which makes it easily consumable by a
payload which wishes to use FW_CONFIG.
Also refactor the generation of all these output files, as the code was
getting messy.
Change-Id: Ie0f4520ee055528c7be84d1d1e2dcea113ea8b5f
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45667
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Change-Id: I7210fb44ed54d365181ca23c6b92d2269dc8a697
Signed-off-by: Benjamin Doron <benjamin.doron00@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45007
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This force-downloads the qc_blobs repository, whose license is then
automatically accepted. This may also cause race conditions with git.
Change-Id: Id760172289abbe4d5ad5f230c9f1d3e1ab3908ec
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45607
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
We rely on `compiler.h` for definitions like `__packed`. Without it,
`smcbiosinfo.c` simply declared a global struct with that name, but
nothing was packed.
Found-by: reproducibility test
Change-Id: Ide055317115fc374a63812bcd3791445ca4f2dcc
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41784
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Most test descriptions are capitalised already. Follow suit.
Change-Id: I756331323a39643244c4adea4c440f305424d6d1
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46321
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Change-Id: I5a5f4e7067948c5cc7a715a08f7a5a3e9b391191
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45904
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Add support for dumping registers, default values for
EC on ITE IT8128F. Taken from datasheet 'IT8728F V0.4.2'
Test: 'superiotool -d -e' on board with IT8728F Super IO
Change-Id: I7074b740565edf458d6894c066b61c083a657cb8
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44417
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Update the information format in the comments above the macros in the
generated gpio.h file:
PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_39, UP_20K, DEEP, NF1, TxLASTRxE,
DISPUPD), /* LPSS_UART0_TXD */ -->(i)
/* GPIO_39 - LPSS_UART0_TXD */ --> (ii)
/* DW0: 0x44000400, DW1: 0x00003100 */ --> (ii)
/* DW0 : PAD_TRIG(OFF) - IGNORED */ --> (iii)
/* _PAD_CFG_STRUCT(GPIO_39, PAD_FUNC(NF1) | PAD_RESET(DEEP) |
PAD_TRIG(OFF), PAD_PULL(UP_20K) | PAD_IOSTERM(DISPUPD)), */ --> (iiii)
PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_39, UP_20K, DEEP, NF1, TxLASTRxE,
DISPUPD),
Also, in the case of field macros:
/* GPIO_39 - LPSS_UART0_TXD */ --> (ii)
/* DW0: 0x44000400, DW1: 0x00003100 */ --> (ii)
/* DW0 : PAD_TRIG(OFF) - IGNORED */ --> (iii)
/* PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_39, UP_20K, DEEP, NF1, TxLASTRxE,
DISPUPD), */ --> (iiii)
PAD_CFG_STRUCT(GPIO_39, PAD_FUNC(NF1) | PAD_RESET(DEEP) | PAD_TRIG(OFF),
PAD_PULL(UP_20K) | PAD_IOSTERM(DISPUPD)),
By default, if do not use the -i... option, then additional information
in comments will not be generated.
TEST:
git clone https://github.com/maxpoliak/inteltool-examples.git test
./intelp2m -n -file test/inteltool-asrock-h110m-stx.log
./intelp2m -fld cb -file test/inteltool-asrock-h110m-stx.log
./intelp2m -fld fsp -file test/inteltool-asrock-h110m-stx.log
./intelp2m -fld raw -file test/inteltool-asrock-h110m-stx.log
Before and after (now with -i key) the patch, gpio.h is no different.
Change-Id: I760f4aadece786ea455fb7569f42e06fefce2b61
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45168
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Tested on out-of-tree CML-U Purism board
Change-Id: I0371e913a75e47b8e6f5a3e4da47b1e401a72b5d
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45929
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add SPD support for DDR4 memory part H5ANAG6NCJR-XNC.
BUG=b:161772961
TEST=none
Change-Id: I71e4de9a28f78bbf8c7de1fcafa3596276a5f2f9
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45962
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This change extends the devicetree override one more layer and allows
the chipset to provide the base devicetree. This allows the chipset to
assign alias names to devices as well as set default register values.
This works for both the baseboard devicetree.cb as well as variant
overridetree.cb.
chipset.cb:
device pci 15.0 alias i2c0 off end
devicetree.cb:
device ref i2c0 on end
BUG=b:156957424
Change-Id: Ia7500a62f6211243b519424ef3834b9e7615e2fd
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44037
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
VBOOT_STARTS_VEFORE_BOOTBLOCK indicates that verstage starts before
bootblock. However "cbmem -1" will first try to match "bootblock
starting" to find out the beginning of console for current boot.
Change ENV_STRING for verstage to "verstage-before-bootblock" in the
case and add regex in cbmem utility to grab it.
BUG=b:159220781
TEST=flash and boot, check `cbmem -1`
BRANCH=zork
Signed-off-by: Kangheui Won <khwon@chromium.org>
Change-Id: Ica38f6bfeb05605caadac208e790fd072b352732
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46060
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
|
|
Add an empty SPD in SPD_SOURCES when creating a new variant of
hatch, volteer, waddledee, or waddledoo, so that coreboot can build
successfully.
For variants that use spd_tools, add an empty mem_parts_used.txt so
that the developer can add the supported memory parts and regenerate
the Makefile.inc with the correct SPD references.
Add an empty SPD for LPDDR4x for waddledee and waddledoo to use.
BUG=b:169422833
TEST=create a new variant of hatch, volteer, waddledee, and waddledoo.
Observe that each one succeeds.
Signed-off-by: Paul Fagerburg <pfagerburg@google.com>
Change-Id: I06dfb6103701bf8949180595f1e98fac48bcc585
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45746
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Every platform passes (and need to) the --flashsize to the command
parameter, so we remove the macro definition about a built-time
romsize defined in Makefile.
Change-Id: I894e833ed23a7da38b36986b624e7dcdf1f4090c
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45780
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
New Jenkins complaint about the original code that return
value gets to nowhere. Fix that with a new variable.
Change-Id: I8099b856ccb751dc380d0e95f5fe319cc3e2c6cc
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45812
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add Makefile.inc to compliant with other tools.
Makefile is kept for building amdfwtool by typing make
in the folder.
Change-Id: I3688d93de4459f5f838955892086b4b9bf30a9b8
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45286
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This reverts commit f23794cf04030bb8d1d7ebe0a3634dffd092e2f7.
Reason for revert: This change breaks compatibility if the changes
in CB:44775 are not also included. CB:44775 is still under discussion,
so revert this change to make spd_tools usable again.
Signed-off-by: Rob Barnes <robbarnes@google.com>
Change-Id: I5840a1b895dcbc8b91c76d8b60df2f95b93a4370
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44999
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
New (maybe) compile tool complains the warning below.
warning: comparison between signed and unsigned
integer expressions [-Wsign-compare]
Fix all of them.
Change-Id: I59624326233284e6c3595df49625563254949c45
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45893
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
BUG=b:153888802
TEST=Able to list correct PCH revision, SPI/eSPI frequency as per
ADL SPI flash guide.
Without this CL :
PCH Revision: 500 series Tiger Point
With this CL :
PCH Revision: 500 series Tiger Point/ 600 series Alder Point
Change-Id: I0faf0f0fdb625ff82eb0033b5b77e6470971bc23
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45808
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Change-Id: I42074387a08b66b038ad2939f31be263eaa3af0e
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44473
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Using bincfg, generate Intel 82579LM GBE region firmware.
* Intel 82579LM is used in Lenovo models including x220 and x230.
* PXE is disabled.
* Intel 82579V variant could be generated with a few modifications to
set. Noted in set file comments.
Change-Id: I377cbe2f77f2aef39f452dc6511a0ea6b2015963
Signed-off-by: Tom Hiller <thrilleratplay@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44510
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I5aa4b9ac4fa1ceb6f3c2ade214d47b29246ece55
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44474
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
Add memory part H5ANAG6NDMR-XNC. Attributes are derived from data
sheets.
BUG=b:165611994
TEST=Compared generated SPD with data sheets and checked in SPD
Change-Id: Ifdcc7536441e9f0b94543c6f06fe466596f752dc
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45647
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Change-Id: I46af7a225238046f393bbc4b3a214bebc527e079
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45733
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
We need at least one SPD in SPD_SOURCES when creating a new variant
of trembyle or dalboz, or else coreboot won't build. Add the empty
DDR4 SPD so that we can build the new variant.
Add an empty mem_parts_used.txt so that the developer can add the
supported memory parts and regenerate spd/Makefile.inc using
spd_tools.
BUG=b:169199396
TEST=create a new variant of dalboz or trembyle and observe that
the build succeeds.
Signed-off-by: Paul Fagerburg <pfagerburg@chromium.org>
Change-Id: I764690c76529780186d0a1d156a623821f9d6972
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45638
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
|
|
Read the correct bits for measured and verified boot, print information
about some other bits.
Signed-off-by: Pablo Stebler <pablo@stebler.xyz>
Change-Id: Ie79d6da33032aee94d716bf0698b5501bbc424fa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45516
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Add defines for the start and size of the FMAP sections to the
optionally generated header file. For the defines the name of the
corresponding FMAP section is used without the full path, since every
section name should be unique anyway as documented here:
Documentation/lib/flashmap.md
BUG=b:157068645
TEST=Generated header file contains expected defines.
BRANCH=zork
Change-Id: Ie31161cfd304b69a3cb4bb366bf365d979e77c64
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45594
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
One bit wide bitfields should always be unsigned, since they can only be
either 0 or -1, but never 1 which is assigned to that bit field in some
cases. Making this unsigned allows it to have the values 0 or 1 which is
what we want there.
BUG=b:157068645
BRANCH=zork
Change-Id: I99c236df583528848b455ef424504e6c2a33c5d6
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45593
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
ACPI tables are generated at runtime for camera components. Remove
the static ASL file.
BUG=b:168755528
TEST=create a new variant of Waddledoo and observe that the build
succeeds.
Signed-off-by: Paul Fagerburg <pfagerburg@chromium.org>
Change-Id: Ie9e3d5856d5e95562df03814ab31e4e79a40a968
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45629
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I2076af9c70b626673a83af9abf464d376cda711b
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45463
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
TEST = ./intelp2m -n -file inteltool.log;
./intelp2m -fld cb -file inteltool.log;
./intelp2m -fld fsp -file inteltool.log;
./intelp2m -fld raw -file inteltool.log.
Before and after the patch, gpio.h is no different.
Change-Id: I8af28960e41fcb97f03fe97c42cdddde07b3615a
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45167
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
Check that nobody misuses the Kconfigs SUBSYSTEM_*_ID. They are meant to
be used for overriding the devicetree subsystem ids locally but shall
not be added to a board's Kconfig. Instead, the devicetree option
`subsystemid` should be used.
Add a linter script for this that finds and warns about such misuse.
Also add a note in the Kconfigs' description.
TEST=CB:45513
Change-Id: I21c021c718154f1396f795a555af47a76d6efe03
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45513
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Extract the steps to parse and override a devicetree into a function
so it can be used multiple times without copying the same logic.
Change-Id: I4e496a223757beb22e3bd678eb6115968bd32529
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44036
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
