Age | Commit message (Expand) | Author |
2008-11-02 | Add support for the ST M50FW002 chip to flashrom. Identification only, | Carl-Daniel Hailfinger |
2008-11-02 | inteltool 82945G/GZ/P/PL Support (trivial) | Stefan Reinauer |
2008-10-31 | Move the nvramtool manpage to section 8 (as it's only really usable as root), | Uwe Hermann |
2008-10-30 | Allow nvramtool to build and work on FreeBSD. Tested on FreeBSD 7. | Andriy Gapon |
2008-10-30 | Mark two more chips as fully tested (trivial). | Uwe Hermann |
2008-10-29 | Flashrom support for some Numonyx parts (M25PE) | Stefan Reinauer |
2008-10-29 | Enable SPI boot flash support on EP80579, which has the ICH7 register set | Ed Swierk |
2008-10-28 | Allow superiotool to compile and work on FreeBSD. Tested on FreeBSD 7. | Andriy Gapon |
2008-10-28 | Mark Winbond W39V040FA" (512 KB) as fully supported, tested by | Uwe Hermann |
2008-10-28 | Add support for the Intel 82371MX (MPIIX) southbridge (trivial). | Uwe Hermann |
2008-10-26 | Add support for the Intel 82371FB PIIX and 82371SB (PIIX3) southbridges. | Uwe Hermann |
2008-10-25 | Add support for the VIA VT82C586A/B chipset, improve documentation. | Uwe Hermann |
2008-10-23 | Add support for the ITE IT8661F/IT8770F, IT8673F, and IT8671F/IT8687R. | Urja Rannikko |
2008-10-21 | Reduce serial output, otherwise flashing will fail very often (trivial). | Uwe Hermann |
2008-10-19 | Add register definitions for W83627HF based on publicly available | Andriy Gapon |
2008-10-18 | Coding-style fixes for flashrom, partly indent-aided (trivial). | Uwe Hermann |
2008-10-18 | flashrom: Allow the SiS 620 chipset to detect and read at least 256kb chips. | Urja Rannikko |
2008-10-15 | SB600 has four write once LPC ROM protect areas. It is not possible to write | Marc Jones |
2008-10-14 | Drop global register 0x07 for all Super I/Os (trivial). | Uwe Hermann |
2008-10-14 | Add dump support to ITE IT8726F, and add comments and a missing GPIO | Josh Profitt |
2008-10-10 | Add ICH10 support to flashrom. | Carl-Daniel Hailfinger |
2008-10-10 | flashrom: Check that a filename was specified also when using force read | Peter Stuge |
2008-10-09 | Add Fintek F71882FG support (trivial). | Uwe Hermann |
2008-10-07 | Support for AM29F002(N)B[BT]. Fully tested on AM29F002NBT. | Mats Erik Andersson |
2008-10-01 | Add some more Super I/O IDs/names (trivial). | Uwe Hermann |
2008-09-30 | Add an abuild command line option for -fno-stack-protect for toolchains that ... | Marc Jones |
2008-09-30 | This patch fixes support for the AT49F002N(T) chip in the flashrom tool. | Tim ter Laak |
2008-09-30 | flashrom: ST M29F040B status TEST_OK_ PROBE READ ERASE WRITE | Peter Stuge |
2008-09-29 | flashrom: Fix typo in r3615 (TEST_PREW -> TEST_OK_PREW) | Peter Stuge |
2008-09-29 | Mark the SyncMOS S29C51002T as working (trivial). | Uwe Hermann |
2008-09-27 | Add string support to nvramtool. | Stefan Reinauer |
2008-09-26 | Activate proper support for EN29F002(A)(N)[BT]. | Mats Erik Andersson |
2008-09-18 | fix two minor bugs in nvramtool. (trivial) | Stefan Reinauer |
2008-09-10 | flashrom: Winbond W49V002A TEST_OK_ PROBE READ ERASE WRITE | Peter Stuge |
2008-09-07 | flashrom: Debug print actual time base calculated by myusec_calibrate_delay() | Peter Stuge |
2008-09-04 | This changes the python generated makefiles | Carl-Daniel Hailfinger |
2008-09-03 | flashrom: Only find "unknown .. SPI chip" if no other chip was found | Peter Stuge |
2008-09-02 | flashrom: SST49LF016C TEST_OK_ PROBE READ ERASE WRITE | Peter Stuge |
2008-08-27 | flashrom: SST25VF016B TEST_OK_ PROBE READ ERASE WRITE | Peter Stuge |
2008-08-20 | flashrom: Recognize the Intel EP80579 LPC flash interface. | Ed Swierk |
2008-08-20 | split the one file, as the several printing functions will continue to grow | Stefan Reinauer |
2008-08-20 | use seperate array for core 2 cpus (trivial) | Stefan Reinauer |
2008-08-19 | Add support for MSI KT4V to flashrom. The KT4V is autodetected and supports | Sean Nelson |
2008-08-18 | inteltool: match cpuid before attempting to print MSRs (trivial) | Stefan Reinauer |
2008-08-15 | fix typo in superiotool (trivial) | Stefan Reinauer |
2008-08-12 | flashrom: Fix error -EINVAL on mmap() | Segher Boessenkool |
2008-08-08 | flashrom: ST M50FW040 TEST_OK PROBE READ ERASE WRITE | Peter Stuge |
2008-08-06 | Add the contents of buildrom's | Ward Vandewege |
2008-08-02 | update copyright year (trivial) | Stefan Reinauer |
2008-08-02 | tested another intel chip (trivial) | Stefan Reinauer |
2008-08-01 | fix build warnings for buildrom (trivial) | Stefan Reinauer |
2008-08-01 | fix typos in config.g, and don't arbitrarily hide some build information | Stefan Reinauer |
2008-07-21 | flashrom: Winbond W39V040C and MSI K8T Neo2-F | Peter Stuge |
2008-07-19 | superiotool: add support for SMSC SIO10N268 (trivial) | Stefan Reinauer |
2008-07-19 | add support for 2 new SMSC superio chips. Information is a bit ambiguous | Stefan Reinauer |
2008-07-11 | Fix and clean up coreboot image detection heuristic. | Carl-Daniel Hailfinger |
2008-07-07 | flashrom: Trivial SPI cleanups | Peter Stuge |
2008-07-07 | flashrom: Trivial indent fix in ichspi.c | Peter Stuge |
2008-07-06 | r3415 removed symbolic constants for device IDs by accident. | Carl-Daniel Hailfinger |
2008-07-06 | flashrom: Add AMIC A29002 | Andreas Thienemann |
2008-07-05 | Adding support for flashing system with Nvidia MCP67 | Stefan Reinauer |
2008-07-05 | flashrom: Add PCI IDs for EPIA-CN | Peter Stuge |
2008-07-03 | Minor cosmetics, e.g. make stuff fit in 80 chars/line etc. (trivial). | Uwe Hermann |
2008-07-03 | Mark SST49LF040B as tested. | Carl-Daniel Hailfinger |
2008-07-03 | Mark the SST SST49LF040 as OK (tested by me), all operations (trivial). | Uwe Hermann |
2008-07-03 | flashrom: Winbond W25x80 TEST_OK PROBE READ ERASE WRITE | Peter Stuge |
2008-07-03 | Improve coreboot image detection heuristic in flashrom. It's not | Carl-Daniel Hailfinger |
2008-07-02 | flashrom: probe_flash() cleanup for better code readability | Peter Stuge |
2008-07-02 | set w39v080fa to fully supported. I'm am flashing this chip several times a | Stefan Reinauer |
2008-07-02 | flashrom: Update to TEST_OK for Winbond W39V040FA PROBE READ | Peter Stuge |
2008-07-02 | flashrom: Don't rm *~ in make clean, who knows what files that could be | Peter Stuge |
2008-07-02 | flashrom: Unknown vendor:board message can be triggered by -m too | Peter Stuge |
2008-07-02 | flashrom: Case insensitive matching of vendor:board strings in coreboot table | Peter Stuge |
2008-06-30 | First attempt to clean up SPI probing and create a common | Stefan Reinauer |
2008-06-30 | Mine AMIC flash chip needs 4 bytes RDID. This enables to use the new probing ... | Rudolf Marek |
2008-06-30 | Mine AMIC flash chip needs 4 bytes RDID. Following patch adds support for that. | Rudolf Marek |
2008-06-30 | This patch adds support for VIA SPI controller on VT8237S. It is similar with | Rudolf Marek |
2008-06-29 | Add a debug marker after ICH SPI opcode programming. | Carl-Daniel Hailfinger |
2008-06-29 | flashrom: Fix ICH7 non-SPI that broke in r3393 | Peter Stuge |
2008-06-28 | Use symbolic constants for PCI subsystem probing in flashrom. | Carl-Daniel Hailfinger |
2008-06-27 | * ICH7 SPI support | Stefan Reinauer |
2008-06-27 | indent according to development guidelines (trivial) | Stefan Reinauer |
2008-06-26 | Winbond W39V080FA: Probe and Read are OK. | Jens Kühnel |
2008-06-24 | flashrom: Test status OK for ST M50FW040 PROBE READ | Peter Stuge |
2008-06-24 | flashrom: Test status OK for Macronix MX25L8005 PROBE READ ERASE WRITE | Peter Stuge |
2008-06-24 | flashrom: Increase delay in probe_jedec() after Product ID Entry to 10ms | Peter Stuge |
2008-06-24 | flashrom: Slight restructure of SPI probe_ functions | Peter Stuge |
2008-06-22 | Some flashrom documentation fixes, and removal of duplicated info (trivial). | Uwe Hermann |
2008-06-22 | flashrom: A few changes were committed before the DoC remove, update README. | Peter Stuge |
2008-06-22 | as per Peter's suggestion. clean binary in make clean | Stefan Reinauer |
2008-06-22 | flashrom: Remove dead M-Systems Disk on Chip code | Peter Stuge |
2008-06-22 | flashrom: Update test status to TEST_OK_PREW for ST M50FLW080A and SST49LF008A | Peter Stuge |
2008-06-22 | flashrom: Some Makefile cleaning | Peter Stuge |
2008-06-21 | flashrom: Fix OBJS in Makefile to compile stm50flw0x0x.c like the others | Peter Stuge |
2008-06-21 | flashrom: Uppercase AMIC since that's what they write in datasheets. | Peter Stuge |
2008-06-21 | flashrom: Update comment to match delay change in probe_jedec() r3373 | Peter Stuge |
2008-06-21 | flashrom: Update test status for Atmel AT29C020 and SST29EE010 | Peter Stuge |
2008-06-21 | flashrom: Increase delay in probe_jedec() to 2ms to reliably detect AT29C020 | Peter Stuge |
2008-06-20 | flashrom: Show expected and read byte on verify failure. Trivial. | Peter Stuge |
2008-06-18 | flashrom: Add support for AMIC Technology A49LF040A and do not probe W29EE011... | Jens Kuehnel |