summaryrefslogtreecommitdiff
path: root/util
AgeCommit message (Expand)Author
2008-01-22Flashrom did not use the read function for verifying, it used direct memoryCarl-Daniel Hailfinger
2008-01-22Make sure we delay writing the next byte long enough in SPI byteCarl-Daniel Hailfinger
2008-01-21Omitting the wait for SPI ready when there is no data to be read, e.g.Ronald Hoogenboom
2008-01-21This patch adds version information to flashrom. Because 'v' and 'V'Bernhard Walle
2008-01-19Add Bingxun Shi <bingxunshi@gmail.com> to the list of contributors (trivial).Uwe Hermann
2008-01-19Small superiotool fix to detect more Winbond W83627EHF chips. TheUwe Hermann
2008-01-19This patch is for winbond w83627DHG superio support in superiotool.Bingxun Shi
2008-01-19Support SPI flash chips bigger than 512 kByte sitting behind IT8716FRonald Hoogenboom
2008-01-18Document the --list-supported option. Various small fixes (trivial).Uwe Hermann
2008-01-18Minor documentation improvements/fixes in the README and manpage (trivial).Uwe Hermann
2008-01-18rename linuxbios_* files in utils repository.Stefan Reinauer
2008-01-18rename linuxbios_* files, too.Stefan Reinauer
2008-01-18util/ renamesStefan Reinauer
2008-01-18rename linuxbios -> corebootStefan Reinauer
2008-01-18for some reasons the externals did not get committed.Stefan Reinauer
2008-01-18Rename almost all occurences of LinuxBIOS to coreboot. Stefan Reinauer
2008-01-15Add new --list-supported switch for printing the list of Super I/OsRobinson P. Tryon
2008-01-11This patch removes '\n' from the help output since this looks a bit strange.Bernhard Walle
2008-01-10Enable MX25L8005 support in flashrom. The #defines were already there.Harald Gutmann
2008-01-07Add support for the SST25VF040B 4 Mbit SPI flash chip.Carl-Daniel Hailfinger
2008-01-04Add board enable for the gigabyte ga_2761gxdk boardRonald G. Minnich
2008-01-04Print at least the vendor for SPI flash chips if the exact chip ID isCarl-Daniel Hailfinger
2007-12-31Unfortunately, EN29F002T, EN29F002AT, EN29F002ANT, EN29F002NT all haveCarl-Daniel Hailfinger
2007-12-31Add continuation ID support to jedec.cCarl-Daniel Hailfinger
2007-12-31This fixes a few vendor IDs to conform with JEDEC publication 106WCarl-Daniel Hailfinger
2007-12-29All SPI chips mentioned in flashchips.c had their sector size listed asCarl-Daniel Hailfinger
2007-12-29Print the chip status register for all SPI chips on probe if verboseCarl-Daniel Hailfinger
2007-12-29Add 25VF016B support to flashrom. Untested, but verified against theCarl-Daniel Hailfinger
2007-12-17Add support for ST M25P05-A, M25P10-A, M25P20, M25P40, M25P16, M25P32,Carl-Daniel Hailfinger
2007-12-17Add dump support for NSC PC87317.Ulf Jordan
2007-12-17To make it easier to add new SPI chips to flashchips.c, rename functionsCarl-Daniel Hailfinger
2007-12-16Add support for ST M25P80 chips to flashrom. Detection was tested.Carl-Daniel Hailfinger
2007-12-14Add dump support for SMSC LPC47M192.Ulf Jordan
2007-12-14Add dump support for NSC PC97317.Ulf Jordan
2007-12-13Add detection and dump support for NSC PC97307.Ulf Jordan
2007-12-13Add dump support for NSC PC8741x.Ulf Jordan
2007-12-10Add support for more atmel chips:Frederico Silva
2007-12-08Add detection and dump support for NSC PC87309.Ulf Jordan
2007-12-07Add/fix some LDN descriptions (trivial).Uwe Hermann
2007-12-07Fix typo. According to National's datasheet PC87317 has SID = 0xd0 andUlf Jordan
2007-12-04Various coding style fixes, constification, fixed typos (trivial).Uwe Hermann
2007-12-02Add board-enable for Acorp 6A815EPD.Jonathan A. Kollasch
2007-11-29Various small fixes (trivial).Uwe Hermann
2007-11-25Dump support for SMSC FDC37C67x.Robinson P. Tryon
2007-11-24Add dump support for the PC87366.Ulf Jordan
2007-11-22Dump support for the SMSC LPC47B27x (trivial).Uwe Hermann
2007-11-17Detection support for more Super I/Os. Small fixes (trivial).Uwe Hermann
2007-11-14Add detection and dump support for the SMSC FDC37N958FR (trivial).Uwe Hermann
2007-11-13[LinuxBIOS] flashrom support for AMD Geode CS5536Lane Brooks
2007-11-13Add dump support for NSC PC87360.Ulf Jordan
2007-11-13Fix ATMEL 29C020 detection with flashrom. The JEDEC probe routine hadCarl-Daniel Hailfinger
2007-11-13Grouping register dumps by 8 register values per group for better readability.Frieder Ferlemann
2007-11-12Drop superfluous exit_conf_mode*() calls, we don't want to call them twice.Uwe Hermann
2007-10-31Use the preferred order of 'static const' instead of 'const static'.Uwe Hermann
2007-10-30K8 resource dump utility from Rudolf MarekRudolf Marek
2007-10-30Add support for Intel 440MX systems.Uwe Hermann
2007-10-25Added Am29LV040BPeter Lemenkov
2007-10-24This change removes all warnings from romcc in my build environment,Stefan Reinauer
2007-10-24smaller changes to silence build warnings. (trivial)Stefan Reinauer
2007-10-22Flashrom: Add more Vendor IDs and ensure correct sorting in flash.h.Peter Lemenkov
2007-10-22Introduce block and sector erase routines to flashrom, but do not useCarl-Daniel Hailfinger
2007-10-18Remove hardcoded wait from SPI write/erase routines and check the chipCarl-Daniel Hailfinger
2007-10-18Documentation fixes and updates (trivial).Uwe Hermann
2007-10-18Add generic SPI flash erase and write support to flashrom. The firstCarl-Daniel Hailfinger
2007-10-17Some cosmetic cleanups in the flashrom code and output.Uwe Hermann
2007-10-17Drop support for the --human-readable option. It's not any more useful thanUwe Hermann
2007-10-17Print the version number always, not only in verbose mode.Uwe Hermann
2007-10-17Add dump support for the Winbond W83697SF.Idwer Vollering
2007-10-17Fix wrong values/typos in chipset_enable.c. This has been confirmed byCarl-Daniel Hailfinger
2007-10-16Multiple flashrom fixes:Uwe Hermann
2007-10-16Add detection support for the Winbond W83977AF as found in theUwe Hermann
2007-10-16Add Gigabyte M61P-S3 SPI flash support to board_enable.cMichael van der Kolff
2007-10-16Convert the existing it8716f_* functions to generic_spi_* functions byCarl-Daniel Hailfinger
2007-10-16Fix the detection for the Winbond W83697SF. Unfortunately the revisionUwe Hermann
2007-10-16Dump support for the Winbond W83977TF.Idwer Vollering
2007-10-15(forgot to add spi.c)Carl-Daniel Hailfinger
2007-10-15Move SPI code out of board_enable.c where it started its life. The SPICarl-Daniel Hailfinger
2007-10-15Fix stupid thinko in the Winbond detection code which prevented someUwe Hermann
2007-10-14Add dump support for the NSC PC8374L (trivial).Uwe Hermann
2007-10-13Set the superiotool version number from svn at build time.Ulf Jordan
2007-10-13Dump support for the SMSC LPC47N227.Stefan Reinauer
2007-10-12Changes to flashrom to support the K8N-NEO3, first tested at Google on GSOC d...Ronald G. Minnich
2007-10-11Superiotool manpage/documentation improvements (trivial).Uwe Hermann
2007-10-10Revert my last cleanup patch.Uwe Hermann
2007-10-10Cosmetic changes to make the flashrom output more consistent (trivial).Uwe Hermann
2007-10-08Fixup a register dump attached to the wrong Super I/O. Seems somethingUwe Hermann
2007-10-08Add detection support for lots more SMSC Super I/Os (trivial).Uwe Hermann
2007-10-07Some more ITE chips and small fixes (trivial).Uwe Hermann
2007-10-07Detection support for a bunch of NSC Super I/Os (trivial).Uwe Hermann
2007-10-07Print a short message if no Super I/O chip could be detected (trivial).Uwe Hermann
2007-10-07Add a list of contributors to the README (trivial). Also, a small hintUwe Hermann
2007-10-07Add dump support for the Winbond W83627THF/THG.David Hendricks
2007-10-07Add a manpage for superiotool (trivial).Uwe Hermann
2007-10-07Dump support for the SMSC FDC37B72x.Robinson P. Tryon
2007-10-07Dump support for the SMSC FDC37B78x.Robinson P. Tryon
2007-10-07Dump support for the SMSC FDC37M81x.Robinson P. Tryon
2007-10-05Add dump support for the Winbond W83627HF/F/HG/G.Rasmus Wiman
2007-10-05Add dump support for the SMSC LPC47M10x (trivial).Uwe Hermann
2007-10-05Add dump support for the ITE IT8661F. Note that this chip will not yetRobinson P. Tryon
2007-10-04Add some more Winbond chips (trivial).Uwe Hermann
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-20 05:00:46 +0000