| Age | Commit message (Collapse) | Author |
|---|
|
Upstream proposed and merged a patch fixing the ARM Trusted Firmware
build issue that occurs with recent version sof binutils. This includes
this patch instead of the previous one.
See binutils commit 7ea12e5c3ad54da440c08f32da09534e63e515ca:
"Fix the generation of alignment frags in code sections for AArch64."
The issue was reported at:
https://sourceware.org/bugzilla/show_bug.cgi?id=20364
Change-Id: I16a8043d3562107b8e84e93d3f3d768d26dac7e4
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-on: https://review.coreboot.org/16110
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: Idfd1bd8240413026b992ae1382a57bccf9d8ddb5
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/16082
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The mainboard chip.h files were (mostly) removed long ago.
Change-Id: I1d5a9381945427c96868fa17756e6ecabb1048b2
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/16080
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The command line parameters for these modes haven't worked in two
years and nobody noticed. They're obviously not getting used, so
remove them.
TEST=Generate static.c before and after the change, verify they're
identical.
Change-Id: I1d746fb53a2f232155f663f4debc447d53d4cf6b
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/16079
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Instead of having directories and file names hardcoded, pass in the full
path and filename of both the input and output files.
In the makefile, create variables for these values, and use them in
places that previously had the names and paths written out.
Change-Id: Icb6f536547ce3193980ec5d60c786a29755c2813
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/16078
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Instead of forcing the hardcoded 'devicetree.cb' filename under the
mainboard directory, this allows mainboards to select a filename for
the devicetree file.
This allows mainboard variants that need to use different devicetree
files to live under the same directory.
Change-Id: I761e676ba5d5f70d1fb86656b528f63db169fcef
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12529
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I1f4626e1bda92af38e7967d7e05a4c7143942cf6
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/16074
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Free any buffers if required.
Change-Id: Iccd435dba51275d875a5fdb5649cdcd0541fd84c
Signed-off-by: Furquan Shaikh <furquan@google.com>
Found-by: Coverity Scan # 1361254
Reviewed-on: https://review.coreboot.org/16073
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Free segs whenever returning from cbfs_payload_make_elf()
Change-Id: I0dd722dd488723cecffe1f5621244bb0344056a6
Signed-off-by: Furquan Shaikh <furquan@google.com>
Found-by: Coverity Scan # 1361268
Reviewed-on: https://review.coreboot.org/16072
Tested-by: build bot (Jenkins)
Reviewed-by: Antonello Dettori <dev@dettori.io>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This relieves caller from having to check if the parameter being passed
in is NULL.
Change-Id: I3ea935c12d46c6fb5534e0f2077232b9e25240f1
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/16076
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I8b9cfe56b5893ba11047fcc1a6727e7e12a15772
Signed-off-by: Furquan Shaikh <furquan@google.com>
Found-by: Coverity Scan # 1361276
Reviewed-on: https://review.coreboot.org/16071
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
This replaces all occurrences of a hardcoded vboot path to the
VBOOT_SOURCE variable, that may be overridden from the command line,
witch fallback to the source from 3rdparty.
Change-Id: Ia57d498d38719cc71e17060b76b0162c4ab363ed
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-on: https://review.coreboot.org/15825
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
during the boot, romstage occurs before postchar which is before
ramstage. Place the tables in the proper boot order when generating
the final webpage.
TEST=Build and run on Galileo Gen2
Change-Id: I5df3ceb797aced58fe5ea3d10d78254a27341e47
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/16042
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Don't require that the routines in the .optional file be listed in the
.complete data file. Concatinate the two files when building the
complete symbol list.
TEST=Build and run on Galileo Gen2
Change-Id: I596134e1a19311d357aa0d93cfb33c7ca9801e2e
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/16037
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Ensure that the output file is created by processing the .debug files
before the .elf files.
TEST=Build and run on Galileo Gen2
Change-Id: Ief8d774249c9d8eb313f3d10f04d7e4f2e3cf491
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/16041
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Document how to use the checklist and how to generate the data files.
TEST=Build and run on Amenia
Change-Id: Idffc0683e916cbc5a984028886dc3d89a01d0595
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/16036
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I66de6a33b43c284198c0a0a97c5c6a10f9b96e02
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/16019
Tested-by: build bot (Jenkins)
Reviewed-by: Omar Pakker
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The interface to strtoul() is a weird mess. It may or may not set errno
if no conversion is done. So check for empty strings and trailing
characters.
Change-Id: I82373d2a0102fc89144bd12376b5ea3b10c70153
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/16012
Tested-by: build bot (Jenkins)
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This examines characters in coreboot's sourcecode to look for values
that are not TAB, or in the range of space (0x20) to ~ (0x7F).
It specifically excludes copyright lines so that names with high-
ASCII characters are not flagged.
Change-Id: I40f7e61fd403cbad19cf0746e2017c53e7379bf8
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/15979
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
These non-ascii & unprintable characters aren't needed.
Change-Id: I129f729f66d6a692de729d76971f7deb7a19c254
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/15977
Tested-by: build bot (Jenkins)
Reviewed-by: Omar Pakker
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: I7930d5cded290f2605d0c92a9c465a3f0c1291a2
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/15974
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Newer Linux kernels fail to detect the initramfs using the old 16M
offset. Increase the offset to the minimum working value, 64M.
Tested-on: qemu pc, 64-bit virtual CPU, linux 4.6 x86_64
Change-Id: I8678fc33eec23ca8f5e0d58723e04d434cd9d732
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
Reviewed-on: https://review.coreboot.org/15999
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I9fee87b7331ee05d4e984cb024f124abb2c97a69
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Found-by: Coverity Scan #1347357
Reviewed-on: https://review.coreboot.org/15962
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
A struct pci_dev was allocated but not freed.
Change-Id: I6a8bbef6a118fc1f0aa7037e72c4d0dda9208f4b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Found-by: Coverity Scan #1353037
Reviewed-on: https://review.coreboot.org/15971
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
There can be cases where "found" wasn't initialized, do so.
Change-Id: Ifef8d61daa70e27ec39b7a8f3481d2316dfaa36e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Found-by: Coverity Scan #1347334
Reviewed-on: https://review.coreboot.org/15969
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Reserved regions showed different behavior for debug and regular builds.
Debug output was unfriendly, regular was wrong.
Print a proper error message and exit instead.
Change-Id: I9842ff61f7d554800e2041e8c4c607f22b2df79f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Found-by: Coverity Scan #1287076
Reviewed-on: https://review.coreboot.org/15968
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
This adds support for the Nuvoton NCT6791D Super I/O chip to the
superiotool.
The implementation is based on the Datasheet supplied by Nuvoton:
Datasheet Version: January 8th, 2016 Revision 1.11
Datasheet deviation:
- Defaults for control registers 0x20 and 0x21 are invalid.
Datasheet: 0xc562. Actual: 0xc803.
Change-Id: I8ced9738cd41960cbab7b5ea38ff19192d210672
Signed-off-by: Omar Pakker <omarpakker+coreboot@gmail.com>
Reviewed-on: https://review.coreboot.org/15252
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This removes the newlines from all files found by the new
int-015-final-newlines script.
Change-Id: I65b6d5b403fe3fa30b7ac11958cc0f9880704ed7
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/15975
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Turned out that there are versions of the patch command that use the
left hand side path for new files created by a patch. This behavior is
incompatible with some of our patches. Stripping the topmost dir from
the path with -p1 helps.
While touching that line, I couldn't resist to drop a command
substituion (the `echo $patch`). It really shouldn't be necessary as the
path to the patch file is already expanded in the head of the for loop.
Change-Id: I95398605db6dd54a8b08d8bc84c6602edbea6e10
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/15908
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
Tested-by: build bot (Jenkins)
|
|
crosfirmware.sh and extract_blobs.sh are not executable, change that.
Change-Id: Ib04df580a9acd4a422aedbdc15013b2ef505459a
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/15922
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Omar Pakker
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: If505021c6dd4bc1c98094dc6e4a3da1ea7753859
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/15916
Tested-by: build bot (Jenkins)
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Change-Id: Iba5fc92d8740d0bb7d41f8a83513ba7fb97be592
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/15900
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Update MSR's registers regarding "Intel® 64 and IA-32
Architectures Software Developer’s Manual"- April 2015.
"64-ia-32-architectures-software-developer-manual-325462.pdf"
Change-Id: I71e399c4a6fef9de6a5581b64a6918660b2f8445
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/15798
Tested-by: build bot (Jenkins)
Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
|
|
Change-Id: I8b7d2263591608e0ab9504262bb06eac4cb52850
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/15779
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This renames the VB_SOURCE variable to VBOOT_SOURCE in the build system,
providing increased clarity about what it represents.
Since the submodule itself is called "vboot", it makes sense to use that
name in full instead of a very shortened (and confusing) version of it.
Change-Id: Ib343b6642363665ec1205134832498a59b7c4a26
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-on: https://review.coreboot.org/15824
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
When no CFLAGS are explicitly provided to it, the GMP configure script
will figure out the best optimization flags to use on its own. In
particular, it will setup the march, mfpu and mtune flags based on
hardware detection.
However, when CFLAGS are provided, they are used as-is and such
detection doesn't happen. When the march, mfpu and mtune flags are not
provided (which happens when GMP wasn't built already), not only will
related optimizations be disabled, but some code might not build because
of missing support. This happens with NEON instructions on ARMv7 hosts.
Thus, it is better not to set CFLAGS and leave it up to the GMP
configure script to get them right and still reuse those later.
Change-Id: I6ffcbac1298523d1b8ddf29a8bca1b00298828a7
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-on: https://review.coreboot.org/15452
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Split the additional time stamps concerning depthcharge from
the cbmem utility sourcecode and move them into
commonlib/timestamp_serialized.h header.
Change-Id: Ic23c3bc12eac246336b2ba7c7c39eb2673897d5a
Signed-off-by: Antonello Dettori <dev@dettori.io>
Reviewed-on: https://review.coreboot.org/15725
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The binutils patch went in without updating the revision,
so we need to update it now. This was done in commit bcfa7ccb
(buildgcc: Update to binutils-2.26.1 & Fix aarch64 build issue)
Change-Id: Ifad4a2e3973f1f60d0ea840945e2bd097e1b4474
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/15712
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
- Update to the latest version of GNU binutils
- Add a patch to undo the changes to binutils done by commit c1baaddf
so that arm-trusted-firmware builds correctly again.
Test: Build arm-trusted-firmware (ATF) with this patch. Build ATF
with binutils 2.26.1 changing the '.align x,0' to '.align x', which
changes the padding bytes to NOP instructions. Verify that everything
except the padding bytes is the same.
See https://sourceware.org/bugzilla/show_bug.cgi?id=20364 for more
information about this issue.
Change-Id: I559c863c307b4146f8be8ab44b15c9c606555544
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/15711
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
See https://github.com/riscv/riscv-isa-sim/issues/54 for more
information.
Change-Id: I8cda8dc07866d395eb3ce5d94df8232840fa8b82
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/15288
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
olddefconfig is used to expand the miniconfig files with all the default
values removed by the 'savedefconfig' target.
Change-Id: Ic9c62f4c334919e8be478d30099819b90891670a
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/15319
Tested-by: build bot (Jenkins)
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Bootstrapping gcc is the recommended way if your host gcc's version
doesn't match the gcc version you're going to build. While a build
with an outdated host gcc usually succeeds, an outdated gnat seems
to be a bigger issue.
v3: Some library controversy: gcc likes the libraries it ships with
most but we don't want to install shared libraries. So we build
them static --disable-shared) and install only the minimum
(libgcc, libada, libstdc++). However, as the code of these
libraries might be used to build a shared library we have to
compile them with `-fPIC`.
v4: o Updated getopt strings.
o The workaround for clang (-fbracket-depth=1024) isn't needed
for bootstrapping and also breaks the build, as clang is only
used for the first stage in that case and gcc doesn't know
that option.
So far build tested with `make BUILDGCC_OPTIONS="-b -l c,ada"` on
o Ubuntu 14.04 "Trusty Tahr" (i386)
o Debian 8 "Jessie" (x86_64) (building python (-S) works too)
o current Arch Linux (x86_64)
o FreeBSD 10.3 (x86_64) (with gcc-aux package)
and with clang host compiler, thus C only: `make BUILDGCC_OPTIONS="-b"`
on
o Debian 8 "Jessie" (x86_64)
o FreeBSD 10.3 (x86_64)
v5: Rebased after toolchain updates to GCC 5.3.0 etc.
Build tested with `make BUILDGCC_OPTIONS="-b -l c,ada"` on
o Debian 8 "Jessie" (x86_64)
Change-Id: Icb47d3e9dbafc55737fbc3ce62a084fb9d5f359a
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/13473
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Refactor build() to make things more flexible:
Add a parameter that tells if we build a package for the host or for a
target architecture. This is just passed to the build_$package()
function and can be used later to take different steps in each case
(e.g. for bootstrapping a host gcc).
Move .success files into the destination directory. That way we can tell
that a package has been built even if the package build directory has
been removed.
Change-Id: I52a7245714a040d11f6e1ac8bdbff8057bb7f0a1
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/13471
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Due to a newer flex version with which the scanner was recreated, we
also have to make the compiler less strict on the generated code.
Change-Id: I3758c0dcb2f5661d072b54a30d6a4ebe094854e6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/15482
Tested-by: build bot (Jenkins)
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Require the user to specify which architecture the payload/stage
was built for before extracting it.
Change-Id: I8ffe90a6af24e76739fd25456383a566edb0da7e
Signed-off-by: Antonello Dettori <dev@dettori.io>
Reviewed-on: https://review.coreboot.org/15438
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This linker error was the problem:
build/util/kconfig/zconf.tab.o: In function `conf_read_simple':
/home/jn/dev/coreboot/util/kconfig/confdata.c:413: undefined reference to `kconfig_warnings'
/home/jn/dev/coreboot/util/kconfig/confdata.c:413: undefined reference to `kconfig_warnings'
build/util/kconfig/zconf.tab.o: In function `sym_calc_value':
/home/jn/dev/coreboot/util/kconfig/symbol.c:388: undefined reference to `kconfig_warnings'
/home/jn/dev/coreboot/util/kconfig/symbol.c:388: undefined reference to `kconfig_warnings'
collect2: error: ld returned 1 exit status
/home/jn/dev/coreboot/util/kconfig/Makefile:339: recipe for target 'build/util/kconfig/gconf' failed
make: *** [build/util/kconfig/gconf] Error 1
Change-Id: I4a667c7c15b35618fb9ad536f2be5044b8031ab4
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/15505
Tested-by: build bot (Jenkins)
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I04add4e6fc957cb9a0cdefe79ec9e97e3cebdf8e
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/15322
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The name 'bpdt_size' is used for a function as well as ia local variable.
As ifwitool is compiled using HOSTCC, there can be an older gcc version
used for the compilation. With gcc version 4.4.7 I get the following
error: declaration of 'bpdt_size' shadows a global declaration
To fix it, rename the function to get_bpdt_size so that names are
unique now.
Change-Id: I47791c705ac4ab28307c52b86940a7a14a5cfef8
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/15343
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Rewrite inline assembly for ARMv7+ to correctly annotate inputs and
outputs. On ARM GCC 6.1.1, this causes assembly output to change from
the incorrect
@ r0 is allocated to hold dst and x0
@ r1 is allocated to hold src and x1
ldr r0, [r1] @ clobbers dst!
ldr r1, [r1, #4]
str r0, [r0]
str r1, [r0, #4]
to the correct
@ r0 is allocated to hold dst
@ r1 is allocated to hold src and x1
@ r3 is allocated to hold x0
ldr r3, [r1]
ldr r1, [r1, #4]
str r3, [r0]
str r1, [r0, #4]
Also modify checkpatch.pl to ignore spaces before opening brackets when
used in inline assembly.
Change-Id: I255995f5e0a7b1a95375258755a93972c51d79b8
Signed-off-by: Benjamin Barenblat <bbaren@google.com>
Reviewed-on: https://review.coreboot.org/15216
Tested-by: build bot (Jenkins)
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
When doing make in util/cbfstool it contaminates the tree because it generates
the fmd_parser.
Change-Id: Ida855d1e57560c76d3fcfcc8e2f7f75bcdfdd5d4
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: https://review.coreboot.org/15221
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
fmaptool generates a header file used to hardcode certain values from
the FMAP in coreboot's binaries, to avoid having to find and parse the
FMAP manually for every access. For the offset of the FMAP itself this
has already been using the absolute offset from the base of the whole
ROM, but for individual CBFS sections it only used the offset from the
immediate parent FMAP region. Since the code using it intentionally has
no knowledge of the whole section tree, this causes problems as soon as
the CBFS is a child section of something not at absolute offset 0 (as is
the case for most x86 Chromebooks).
Change-Id: If0c516083949fe5ac8cdae85e00a4461dcbdf853
Reported-by: Rolf Evers-Fischer <embedded24@evers-fischer.de>
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/15273
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This is required because SPIKE doesn't support loading flat files yet.
Change-Id: If745d78712ca8108b5dcc21591201bc2d3f70b86
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/14964
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Implement function that automatically converts a SELF payload,
extracted from the CBFS, into an ELF file.
The code has been tested on the following payloads:
Working: GRUB, FILO, SeaBIOS, nvramcui, coreinfo and tint
Currently not working: none
Change-Id: I51599e65419bfa4ada8fe24b119acb20c9936227
Signed-off-by: Antonello Dettori <dettori.an@gmail.com>
Reviewed-on: https://review.coreboot.org/15139
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Allow to write multiple phdrs, one for each non-consecutive section
of the ELF.
Previously it only worked for ELFs contaning a single
program header.
Change-Id: If6f95e999373a0cab4414b811e8ced4c93c67c30
Signed-off-by: Antonello Dettori <dev@dettori.io>
Reviewed-on: https://review.coreboot.org/15215
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Checksum is calculated by using 2s complement method. 8-bit sum of the
entire subpart directory from first byte of header to last byte of last
partition directory entry.
BUG=chrome-os-partner:53508
Change-Id: I991d79dfdb5331ab732bf0d71cf8223d63426fa8
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15200
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I07523252eacffb323e2bb54c306f5e9ac83e4cbd
Signed-off-by: Rolf Evers-Fischer <embedded24@evers-fischer.de>
Reviewed-on: https://review.coreboot.org/15162
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
1. The checksum method that was documented is not correct. So, no use
filling in a value based on wrong calculations. This can be added back
once updated information is available.
2. Checksum does not seem to affect the booting up of SoC. So, fill in 0
for now.
Change-Id: I0e49ac8e0e04abb6d7c9be70323612bdef309975
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15145
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Update pack and header order and mark the entries as mandatory and
recommended w.r.t. ordering (mandatory = essential for booting,
recommended = okay to change, but this config is tested and known to work).
Change-Id: Ia089bdaa0703de830bb9553130caf91a3665d2c4
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15144
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: Ib674ab7ca8b6464de553a86536b1762fda98d94e
Signed-off-by: Chris Ching <chingcodes@google.com>
Reviewed-on: https://review.coreboot.org/14901
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Scan the boot block when building it with C_ENVIRONMENT_BOOTBLOCK
selected.
TEST=Build and run with Galileo Gen2
Change-Id: I922f761c31e95efde0975d8572c47084b91b2879
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/15130
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The current implementation from Vladimir simply dumps 1 MB of memory
contents starting at the base address of the second PCI device (which
most likely is the VGA controller on Intel systems). This locks up a
number of different systems, e.g. my Ibex Peak-based T410s.
This patch documents the issue and stops dumping the graphics registers
for the -a/--all parameter.
Change-Id: I581bdc63db60afaf4792bc11fbeed73aab57f63a
Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at>
Reviewed-on: https://review.coreboot.org/14627
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Adds a label for each tool included in the cbfstool package
in order to build them more easily through Make.
Change-Id: Id1e5164240cd12d22cba18d7cc4571fbadad38af
Signed-off-by: Antonello Dettori <dettori.an@gmail.com>
Reviewed-on: https://review.coreboot.org/15075
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This adds the ISA bridge device id for the Intel C160/X99 series
chipset to the intelmetool.
Change-Id: I2e7db0fe1692985ebb167b9a44ab412a45a9f3bd
Signed-off-by: Omar Pakker <omarpakker+coreboot@gmail.com>
Reviewed-on: https://review.coreboot.org/15053
Tested-by: build bot (Jenkins)
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Build the <board>_checklist.html file which contains a checklist table
for each stage of coreboot. This processing builds a set of implemented
(done) routines which are marked green in the table. The remaining
required routines (work-to-do) are marked red in the table and the
optional routines are marked yellow in the table. The table heading
for each stage contains a completion percentage in terms of count of
routines (done .vs. required).
Add some Kconfig values:
* CREATE_BOARD_CHECKLIST - When selected creates the checklist file
* MAKE_CHECKLIST_PUBLIC - Copies the checklist file into the
Documenation directory
* CHECKLIST_DATA_FILE_LOCATION - Location of the checklist data files:
* <stage>_complete.dat - Lists all of the weak routines
* <stage>_optional.dat - Lists weak routines which may be optionally
implemented
TEST=Build with Galileo Gen2.
Change-Id: Ie056f8bb6d45ff7f3bc6390b5630b5063f54c527
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/15011
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: Ie7a12a39116ee08f5e24c81c97695201169a63f7
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15022
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
- Supports following operations:
1. add raw/dir sub-partition
2. extract raw/dir sub-partition
3. print info
4. delete raw sub-partition
5. replace raw/dir sub-partition
Change-Id: I683a0ab13cc50eb60eecca34db4a8ffefc8dccbd
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/14896
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This avoids re-declaring common macros like ARRAY_SIZE, MIN, MAX and
ALIGN. Also removes the issues around including both files in any
tool.
Also, fix comparison error in various files by replacing int with
size_t.
Change-Id: I06c763e5dd1bec97e8335499468bbdb016eb28e5
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/14978
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Since fit.c is the only caller of this function move it out of common.c
and into fit.c.
Change-Id: I64cc31a6d89ee425c5b07745ea5ca9437e2f3fcf
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/14949
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Add support for chip NCT6102D / NCT6106D in superiotool
Change-Id: I689ff8e796f43a5aac144e9898df750407588b1f
Signed-off-by: Roberto Muñoz Gómez <munoz.roberto@gmail.com>
Reviewed-on: https://review.coreboot.org/14206
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins)
|
|
If '-b' isn't passed when adding an FSP file type to CBFS allow
the currently linked address to be used. i.e. don't relocate the
FSP module and just add it to CBFS.
Change-Id: I61fefd962ca9cf8aff7a4ca2bea52341ab41d67b
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14839
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Change-Id: I274c990e69634ebcb9dd77470cbf1515281de312
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/14683
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add support for a basic generic device in the devicetree to bind to a
device that does not have a specific bus, but may need to be described
in tables for the operating system. For instance some chips may have
various GPIO connections that need described but do not fall under any
other device.
In order to support this export the basic 'scan_static_bus()' that can
be used in a device_operations->scan_bus() method to scan for the generic
devices.
It has been possible to get a semi-generic device by using a fake PNP
device, but that isn't really appropriate for many devices.
Also Re-generate the shipped files for sconfig. Use flex 2.6.0 to avoid
everything being rewritten. Clean up the local paths that leak into the
generated configs.
Change-Id: If45a5b18825bdb2cf1e4ba4297ee426cbd1678e3
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/14789
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
|
|
Use the second token for an i2c device entry in devicetree.cb to
indicate if it should use 10-bit addressing or 7-bit. The default if
not provided is to use 7-bit addressing, but it can be changed to
10-bit addressing with the ".1" suffix. For example:
chip drivers/i2c/generic
device i2c 3a.1 on end
end
Change-Id: I1d81a7e154fbc040def4d99ad07966fac242a472
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/14788
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Currently you cannot assign a string to a register in devicetree because
the quotes are removed when parsing and the literal is assigned directly.
Add a parse option for two double-quotation marks to indicate a string
and return a quoted literal that can be assigned to a register with a
'const char *' type.
Example:
chip drivers/i2c/generic
register "hid" = ""INT343B""
register "uid" = "1"
device i2c 15 on end
end
Change-Id: I621cde1f7547494a8035fbbab771f29522da1687
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/14787
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Long options can be useful when writing examples and documentation
as they are more expressive and obvious to the reader.
Change-Id: I39496765ba1f15ccc2ffe1ad730f0f95702f82b8
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: https://review.coreboot.org/14736
Tested-by: build bot (Jenkins)
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
|
|
If the option is not provided, ssh uses the default port for the host,
which is usually 22, but may be overridden in the user's SSH
configuration.
Change-Id: I303e9aeae16bd73a96c5e6d54f8e39482613db28
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/14522
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
In some configurations, "git push <remote>" (without a branch name)
refuses to do anything.
Change-Id: I23a401b39dd851e9723676586c7f29afa111b49d
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/14539
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
- manpage
- usage message
- new warning message if -S is used on an unsupported chipset
Change-Id: I1acaa5f4232b65244ec00fd22ec7460d9cc387f1
Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at>
Reviewed-on: https://review.coreboot.org/14624
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
FSP 2.0 uses the same relocate logic as FSP 1.1. Thus, rename
fsp1_1_relocate to more generic fsp_component_relocate that can be
used by cbfstool to relocate either FSP 1.1 or FSP 2.0
components. Allow FSP1.1 driver to still call fsp1_1_relocate which
acts as a wrapper for fsp_component_relocate.
Change-Id: I14a6efde4d86a340663422aff5ee82175362d1b0
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/14749
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Currently, convert_fsp assumes that the component is always XIP. This
is no longer true with FSP 2.0 and Apollolake platform. Thus, add the
option -y|--xip for FSP which will allow the caller to mention whether
the FSP component being added is XIP or not. Add this option to
Makefiles of current FSP drivers (fsp1_0 and fsp1_1).
Change-Id: I1e41d0902bb32afaf116bb457dd9265a5bcd8779
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/14748
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
(1) Added following new function.
cbfs_locate_file_in_region - to locate (and mmap) a file in a flash
region
This function is used to look for MMA blobs in "COREBOOT" cbfs region
(2) mma_setup_test.sh would write to "COREBOOT" region.
(3) changes in mma_automated_test.sh. Few MMA tests need system to
be COLD rebooted before test can start. mma_automated_test.sh would
do COLD reboot after each test, and so i would sync the filesystem
before doing COLD reboot.
BRANCH=none
BUG=chrome-os-partner:43731
TEST=Build and Boot kunimitsu (FAB4). Able to locate MMA files in CBFS
Not tested on Glados.
Change-Id: I8338a46d8591d16183e51917782f052fa78c4167
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 1e418dfffd8a7fe590f9db771d2f0b01a44afbb4
Original-Change-Id: I402f84f5c46720710704dfd32b9319c73c412e47
Original-Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/331682
Original-Commit-Ready: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Original-Tested-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: https://review.coreboot.org/14125
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
mma_automated_test.sh takes a config file (/usr/local/mma/tests) as
input and executes all tests mentioned in the config file.
format of the config file is one or more lines mentioned below.
<MMA test name> <MMA test param> <#count>
e.g. consider following config file.
Margin1D.efi Margin1DRxVrefConfig.bin 4
RMT.efi RMTConfig.bin 1
MarginMapper.efi ScoreTxVref-TxDqDelayConfigCh1.bin 2
Margin2D.efi Margin2D_Cmd_Ch0_D1_R0_Config.bin 3
This will execute Margin1D.efi MMA test 4 times with
Margin1DRxVrefConfig.bin param and results will be stored
in DUT under /usr/local/mma/results_<date-time-stamp>
with Margin1D_Margin1DRxVrefConfig_1.bin to
Margin1D_Margin1DRxVrefConfig_4.bin name. Subsequently all tests
will be executed and results will be stored.
/etc/init/mma.conf invokes mma_automated_test.sh when DUT
starts. And if valid test config is preset at /usr/local/mma/tests,
mma_automated_test.sh will continue executing the tests. Each time
DUT will be rebooted and next test in sequence will be executed.
Overall follow these steps to start MMA.
(1) create /usr/local/mma/tests file with the syntax mentioned above.
(2) either reboot the DUT (mma.conf will be called at each boot time,
which would run the mma_automated_test.sh) or execute "start mma"
command (to save a reboot cycle.)
(3) all test results can be found under
/usr/local/mma/results_<date-time-stamp> where <date-time-stamp> is
YY_MM_DD_HH_mm format (YEAR_MONTH_DAY_HOUR_MINUTE) when you started
the mma tests.
BRANCH=none
BUG=chrome-os-partner:43731
TEST=Build and Boot kunimitsu (FAB3). MMA automation tests executes
and results get saved.
Change-Id: I6805fdb95b7ff919f9c8e967b748e4893a3f9889
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 68c0a531ba3fc335b92b17002e75412195b778c4
Original-Change-Id: I92db7ca47e1e3e581c3fbb413f11e2c3e6d19b6b
Original-Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com>
Original-Signed-off-by: Icarus Sparry <icarus.w.sparry@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/313180
Original-Commit-Ready: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Original-Tested-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: https://review.coreboot.org/12928
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The IPQ40xx Primary Boot Loader (PBL, i.e. Boot-ROM) expects an
ELF in the boot medium to load and boot. These scripts combine
the Secondary Boot Loader (SBL) and Coreboot ELF to an image as
expected by the PBL.
BUG=chrome-os-partner:49249
TEST=Able to boot and reach depthcharge
BRANCH=none
Change-Id: I5d02b7f1f58bb23d81a3e19fb9b78f3a999b89f3
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 819c7f2a810ca2880718ba14f2451f06eef4d98b
Original-Change-Id: I017207b2d4108de150853f421aa7bcfd0e12e9a4
Original-Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/340181
Original-Commit-Ready: Nicolas Boichat <drinkcat@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: https://review.coreboot.org/14680
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
and re-generate _shipped files
Change-Id: I7a18824d64d3f6212e8566695376bf97e2196ee2
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14733
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
|
|
This converts the argument parsing to allow us to add longopts
using GNU getopt(1).
Shortopts should be reserved for general parameters. Longopts can be
used to tweak specific behaviors. For example, we might wish to add
options to set SSH port, timeout, and authentication parameters
with "--ssh-port", "--ssh-timeout", "--ssh-identity", etc.
Change-Id: Idee5579079dbbb7296ad98f5d6025b01aab55452
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: https://review.coreboot.org/14523
Tested-by: build bot (Jenkins)
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
|
|
A previous patch [1] to make top-aligned addresses work within per
fmap regions caused a significant regression in the semantics of
adding programs that need to be execute-in-place (XIP) on x86
systems. Correct the regression by providing new function,
convert_to_from_absolute_top_aligned(), which top aligns against
the entire boot media.
[1] 9731119b cbfstool: make top-aligned address work per-region
Change-Id: I3b685abadcfc76dab8846eec21e9114a23577578
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14608
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Change-Id: I57f935b94ab0db2e9ff9434fb496d470bb4ec987
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14463
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
|
|
Update gdb to 7.11 and expat to 2.1.1
riscv64-elf is still broken.
Change-Id: Id7605f4274fcb15f9c3e366f5c492328f70f7956
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14461
Tested-by: build bot (Jenkins)
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
|
|
New tools:
* mpfr 3.1.4
* binutils 2.26
* gcc 5.3.0
* llvm/clang 3.8.0
Patch changes:
* binutils-2.25_fix-aarch64.patch: fixed in 2.26
* binutils-2.25_host-clang.patch: the positions of header file
includes have been adjusted
* binutils-2.25_no-bfd-doc.patch: update to 2.26
* binutils-2.25_riscv.patch: update from riscv-gnu-toolchain
* gcc-5.2.0_elf_biarch.patch: update to 5.3.0
* gcc-5.2.0_gnat.patch: update to 5.3.0
* gcc-5.2.0_libgcc.patch: update to 5.3.0
* gcc-5.2.0_nds32.patch: update to 5.3.0
* gcc-5.2.0_riscv.patch: update from riscv-gnu-toolchain
* cfe-3.7.1.src_frontend.patch: update to 3.8.0
In the latest code of riscv-gnu-toolchain project, the patch for
{binutils,gcc}/config.sub has been removed, and the target is renamed
as riscv32 and riscv64. The `riscv' to `riscv64' change in xcompile is
in another commit.
Test results:
All GCC and LLVM/clang toolchain build successfully.
x86,arm: qemu boots
power8: firmware fails to boot
aarch64,mips: not tested
riscv: firmware fails to build with new binutils
clang: firmware fails to boot
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Change-Id: I42ce89c29263d768d161c28199994f17d0389633
Reviewed-on: https://review.coreboot.org/14227
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Remove debug output and parted messages.
Change-Id: I6416a88b5fdb4c92741439e9edb5f753f885cbe3
Signed-off-by: Joseph Pillow <joseph.a.pillow@gmail.com>
Reviewed-on: https://review.coreboot.org/14460
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Always set HOSTCFLAGS to the flags GMP was built with, defaulting to
"-Os" if it isn't built yet. Previously, if GMP was already built or
not even in the list of packages to be built, this was silently skipped
and other packages were built with empty HOSTCFLAGS.
Change-Id: I29b2ea75283410a6cea60dc1c92b87573aebfb34
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/13550
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The xz archives are slightly smaller than the bz2 archives for gmp
and mpfr, so use them instead to speed up the download.
Change-Id: I3729455cdbc46e5a0cff119ecca97b0e00c3d402
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14462
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Both packages are not using the target architecture. Drop it,
and remove them from package_uses_targetarch
Change-Id: I58efde4cb7cc39e7e3c31527eb7682e318928100
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14464
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
By exporting base and offset of CBFS-formatted fmap regions, the code
can use these when it's not prudent to do a runtime lookup.
Change-Id: I20523b5cea68880af4cb1fcea4b37bb8ac2a23db
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/14571
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Just because an 'as' with a certain prefix is available does not guarantee
that a 'gcc' with the same prefix is available as well.
Without a check detect_compiler_runtime() would try to execute an
unavailable binary and print something like this:
.../xcompile: line 218: arm-linux-gnueabi-gcc: command not found
Change-Id: Icbadfeb2860152f7cf7696a9122521d0d881f3aa
Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at>
Reviewed-on: https://review.coreboot.org/14563
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Gitweb isn't online anymore, so fix a few broken links.
Change-Id: I7fdfcb60f83a718c9a5b6c7f7ef4df9206451d95
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/14559
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: Ic0866a5183c64070ef35b21ba00586bc65dfcde8
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/14538
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Test results under 16 days old display with an incorrect background color
due to the leading zero not being preset in the associated HTML color code.
Add the leading zero where needed to generate a valid HTML color code.
Change-Id: I0dfe29ec1afc409a4908073922ac31a4091f0f1f
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/14514
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
A major issue with the board-status Wiki page is that it shows all
test results equally regardless of age. As a test result ages it
becomes more likely that the board no longer works peroperly under
coreboot due to code churn.
Visually indicate board-test status "at a glance" by smoothly fading
the background color of the test result from green to yellow as the
test result ages. This patch sets the full yellow transition to 255
days after test for programming convenience, however the number of
days required to fully "stale" a test result could be modified
relatively easily.
Change-Id: I5a076a6cc17d53fda8e4681e38074fc1f46c0e12
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/14457
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
Tested-by: build bot (Jenkins)
|
|
This is in response to issue #28: board-status should reject duplicate
uploads.
Change-Id: Iff99be154b35e8c0f9f05f9470d1c2dcff8510b8
Signed-off-by: Huimin Zhang <thehobn@gmail.com>
Reviewed-on: https://review.coreboot.org/14187
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
