| Age | Commit message (Expand) | Author |
|---|
| 2009-02-18 | Carl-Daniel's part: | Carl-Daniel Hailfinger |
| 2009-02-10 | Change 0x%p to %p. Thanks Stefan for catching the one I introduced in 3931. | Myles Watson |
| 2009-02-09 | flashrom: Fix broken flash chip base address logic | Peter Stuge |
| 2009-02-02 | flashrom: MSI MS-7046 board enable | Peter Stuge |
| 2009-02-01 | Following patch fixes VIA SPI (VT8237S). It needs to have opcodes | Rudolf Marek |
| 2009-01-28 | Factor out read and erase functions from flashrom main(). | Carl-Daniel Hailfinger |
| 2009-01-26 | msrtool: Allow MSR symbols (names) to also be used as addresses. | Peter Stuge |
| 2009-01-26 | msrtool: Linux /dev/cpu/*/msr returns the low 32 bits before the high 32 bits. | Peter Stuge |
| 2009-01-26 | flashrom: Add VT8237A PCI ID | Peter Stuge |
| 2009-01-26 | flashrom: Fix one dead increment and one dead assignment as found by clang. | Peter Stuge |
| 2009-01-26 | flashrom: Driver for ST M29F002T/NT/B. T/NT TEST_OK_ PROBE READ ERASE WRITE | Peter Stuge |
| 2009-01-26 | flashrom: Fix copypaste error in r3913. | Peter Stuge |
| 2009-01-26 | msrtool: AMD CS5536 probe implementation. | Peter Stuge |
| 2009-01-26 | msrtool: Make configure work with zsh, the default shell in Darwin. | Peter Stuge |
| 2009-01-26 | flashrom: SST25VF040B using 0x90 identification and AAI write. | Peter Stuge |
| 2009-01-26 | flashrom: Decode SST25VF040B status register, also from July 2008. | Peter Stuge |
| 2009-01-26 | flashrom: Intel Desktop Board D201GLY | Peter Stuge |
| 2009-01-26 | flashrom: Winbond SuperIO SPI driver. | Peter Stuge |
| 2009-01-26 | flashrom: Export Winbond SuperIO register access functions in board_enable.c. | Peter Stuge |
| 2009-01-26 | flashrom: Document exit() codes introduced in r3907. | Peter Stuge |
| 2009-01-26 | flashrom: exit(2) on /dev/mem open() failure and exit(3) on mmap() failure. | Peter Stuge |
| 2009-01-26 | flashrom: Add license header to physmap.c so everyone is happy. :) | Peter Stuge |
| 2009-01-26 | flashrom: Darwin / Mac OS X | Stefan Reinauer |
| 2009-01-26 | flashrom: Small cleanup in Makefile. | Peter Stuge |
| 2009-01-26 | flashrom: Abstract mmap() in physmap.c and only open /dev/mem on the first ph... | Stefan Reinauer |
| 2009-01-26 | flashrom: Change flashrom.c:map_flash_registers() from int to void. | Peter Stuge |
| 2009-01-26 | flashrom: Forgot some things in r3899. | Peter Stuge |
| 2009-01-26 | flashrom: Little readability improvement in cbtable.c:coreboot_init() | Peter Stuge |
| 2009-01-26 | flashrom: Change FreeBSD #ifdef into #if defined() | Stefan Reinauer |
| 2009-01-25 | flashrom: Make Makefile a bit more portable. Shell echo doesn't always know -n. | Peter Stuge |
| 2009-01-25 | flashrom: Add dry Am29F080B Am29LV081B SST39VF080 definitions per data sheets. | Peter Stuge |
| 2009-01-25 | flashrom: Beautify flash chip ID verbose printout a little, always use %02x. | Peter Stuge |
| 2009-01-25 | flashrom: Fix stupid off-by-one error in erase verification. | Peter Stuge |
| 2009-01-24 | flashrom: ST M50FW080 TEST_OK_ PROBE READ ERASE WRITE | Peter Stuge |
| 2009-01-24 | flashrom: SST25VF080B TEST_OK_PROBE | Peter Stuge |
| 2009-01-23 | flashrom: Check all mmap() calls and print helpful Linux error message. | Peter Stuge |
| 2009-01-22 | flashrom: Provide some hints for the user in case /dev/mem mmap fails. | Peter Stuge |
| 2009-01-19 | First shot at factoring SMM code into generic parts and southbridge specific | Stefan Reinauer |
| 2009-01-18 | flashrom: Fix ICH9 locking register address and add important debug output. | FENG yu ning |
| 2009-01-15 | flashrom: Add ICH opcode debugging. | Peter Stuge |
| 2009-01-15 | Similarly to flashchips array, this patch intends to make the table | Stephan Guilloux |
| 2009-01-13 | flashrom: Always print address when verification fails, not only with -V. | Peter Stuge |
| 2009-01-12 | flashrom: Board enable for GIGABYTE GA-MA78G-DS3H | Peter Stuge |
| 2009-01-12 | flashrom: IT8718F works just like IT8716F. | Peter Stuge |
| 2009-01-12 | flashrom: Check return value of fscanf()/fwrite()/fread() | Peter Stuge |
| 2009-01-11 | flashrom: Update usage in README | Idwer Vollering |
| 2009-01-08 | Add erase and write functions to the following chip definitions: | Carl-Daniel Hailfinger |
| 2009-01-08 | The flashrom man page has incomplete author/copyright sections and an | Carl-Daniel Hailfinger |
| 2009-01-08 | This patch improves machine parseability and human readability of | Stephan Guilloux |
| 2009-01-07 | Add SST49LF020 support. | Sven Schnelle |
| 2009-01-07 | Add AMD-768 chipset support. | Sven Schnelle |
| 2009-01-07 | Add i631x LPC support. | Sven Schnelle |
| 2008-12-22 | If you pass a bogus layout file to the -l option flashrom will segfault. | Uwe Hermann |
| 2008-12-22 | Add another board-enable line for the Kontron 986LCD-M/mITX. | Uwe Hermann |
| 2008-12-22 | flashrom: Initialize ICH SPI opcodes also for ICH9 and later. | Peter Stuge |
| 2008-12-20 | This adds register map based on NSC PC87392 datasheet. LDN#2 can be | Michał Mirosław |
| 2008-12-15 | * add a generic preop-opcode-pair table. | FENG yu ning |
| 2008-12-10 | Add 28 flash chips of the MX29 series to the flashrom ID table and | Carl-Daniel Hailfinger |
| 2008-12-08 | Kill obsolete and misplaced comment. | Carl-Daniel Hailfinger |
| 2008-12-08 | Generates OPCODES struct from the ICH7/ICH9/VIA chipset if its SPI | FENG yu ning |
| 2008-12-08 | Breaks chip info into multiple lines. | FENG yu ning |
| 2008-12-06 | flashrom: Display test status in -L chip listing | Peter Stuge |
| 2008-12-05 | flashrom: Add AMD SB700 flash enable | Niels Ole Salscheider |
| 2008-12-05 | flashrom: Fix compilation of r3797 with gcc-4.3.2 | Peter Stuge |
| 2008-12-05 | flashrom: Check if erase succeeds and exit with error on failure. | Peter Stuge |
| 2008-12-04 | Patch to util/inteltool: | Stefan Reinauer |
| 2008-12-04 | Add RDID/REMS IDs for the following flash chips: | Carl-Daniel Hailfinger |
| 2008-12-03 | flashrom: gcc thinks base could be used uninitialized, so shut it up. | Peter Stuge |
| 2008-12-03 | flashrom: Fix bug in r3790 | Peter Stuge |
| 2008-12-03 | Replace #ifdefs for sc520 systems by run time probing. | Stefan Reinauer |
| 2008-12-02 | build_opt_tbl: | Stefan Reinauer |
| 2008-12-01 | The Winbond Super I/O chips have another indirection of registers. The | Stefan Reinauer |
| 2008-11-30 | ok, another attempt to the build_opt_tbl problem: | Stefan Reinauer |
| 2008-11-29 | Copyright update by Jason Wang for freshly written sb600 code. | Jason WangQingpei.wang |
| 2008-11-28 | Declare special commands to support the Atmel AT25F512A. | Carl-Daniel Hailfinger |
| 2008-11-28 | If a chip has any TEST_BAD_* flag set, we don't even list the | Carl-Daniel Hailfinger |
| 2008-11-28 | Add support for the AMD/ATI SB600 southbridge SPI functionality. | Jason Wang |
| 2008-11-28 | This patch fixes the ugly race condition created through build_opt_tbl | Stefan Reinauer |
| 2008-11-28 | Add SST25VF080B flash chip support. | Jason Wang |
| 2008-11-28 | Flashrom already has the following probe functions: | Carl-Daniel Hailfinger |
| 2008-11-27 | The existing check in probe_spi_res() was right for SPI controllers | Carl-Daniel Hailfinger |
| 2008-11-25 | msrtool: Use libpci to let system and target probes find PCI devices. | Peter Stuge |
| 2008-11-24 | Add support for 32Mbit SPI flash SST25VF032B. Tested on gigabyte m57sli. | Tero O Peippola |
| 2008-11-22 | msrtool: Very small fixes I made after sending out the rc1 tarball. | Peter Stuge |
| 2008-11-22 | msrtool: Release Candidate 1 | Peter Stuge |
| 2008-11-18 | Currently flashrom assumes every vendor BIOS shares our view about which | Carl-Daniel Hailfinger |
| 2008-11-18 | Check for failed SPI command execution in flashrom. Although SPI itself | Carl-Daniel Hailfinger |
| 2008-11-18 | Implement read support for the following Atmel chips: | Carl-Daniel Hailfinger |
| 2008-11-17 | flashrom: SST39VF020 TEST_OK_ PROBE READ ERASE WRITE | Mart Raudsepp |
| 2008-11-15 | The AT25 and AT26 series SPI chips from Atmel are plain EEPROMs. | Carl-Daniel Hailfinger |
| 2008-11-12 | Add detection support for ITE IT8228E, IT8711F, IT8722F, IT8761E, | Uwe Hermann |
| 2008-11-10 | cosmetic update for getpir. | Stefan Reinauer |
| 2008-11-08 | flashrom: SST39SF040 TEST_OK_ PROBE READ ERASE WRITE | Peter Stuge |
| 2008-11-05 | The ST M25P16 chip has been confirmed to work fine for probe, read, | Carl-Daniel Hailfinger |
| 2008-11-04 | Add support for 8 new chips to flashrom and fix up 2 existing chips | Carl-Daniel Hailfinger |
| 2008-11-03 | Dump ICH8/ICH9/ICH10 SPI registers in flashrom. | Carl-Daniel Hailfinger |
| 2008-11-03 | Add additional SPI sector erase and chip erase command functions to | Carl-Daniel Hailfinger |
| 2008-11-02 | Drop nr/opcode_index parameter from run_opcode and search the opmenu for the ... | Stefan Reinauer |
| 2008-11-02 | Add support for the ST M50FW002 chip to flashrom. Identification only, | Carl-Daniel Hailfinger |
| 2008-11-02 | inteltool 82945G/GZ/P/PL Support (trivial) | Stefan Reinauer |
