Age | Commit message (Expand) | Author |
2009-04-14 | util/cbfstool/tools/rom-mk*->cbfs-mk* rename | Peter Stuge |
2009-04-14 | v2/src romfs->cbfs rename | Peter Stuge |
2009-04-14 | util: romfs->cbfs rename | Peter Stuge |
2009-04-14 | v2/util: romfs -> cbfs rename | Peter Stuge |
2009-04-13 | Fix typo. Add missing copyright year. | Uwe Hermann |
2009-04-11 | Mention a few more flash chip packages in README/manpage. | Uwe Hermann |
2009-04-10 | move architecture override before cross compiler detection, or the Sandpoint | Stefan Reinauer |
2009-04-10 | Add a note that 'modprobe msr' might be required. | Uwe Hermann |
2009-04-10 | Fix typo. | Uwe Hermann |
2009-04-10 | Various manpage / README fixes: | Uwe Hermann |
2009-04-09 | Fixed the typo should indeed be a 0x2e. | Mondrian nuessle |
2009-04-08 | Only build romfs on those target that have CONFIG_ROMFS enabled. | Stefan Reinauer |
2009-04-04 | Makefile includes were mixed up. | Stefan Reinauer |
2009-04-04 | This fixes a race condition (revealed by my other check-in r4067) in the | Stefan Reinauer |
2009-04-04 | build romtool in mainboard target directory. | Stefan Reinauer |
2009-04-04 | fix cross compilation in abuild for certain scenarios | Stefan Reinauer |
2009-04-04 | fix some warnings by casting safely. (trivial) | Stefan Reinauer |
2009-04-04 | use $(MAKE) instead of hardcoded "make".. (trivial) | Stefan Reinauer |
2009-04-04 | Fix the concurrency issue of building romtool. | Patrick Georgi |
2009-04-03 | I thought that romfs infrastructure is done now, but there were some | Patrick Georgi |
2009-04-03 | This patch implements --include=file.h for romcc. | Stefan Reinauer |
2009-04-03 | the attached patch is the last infrastructure change necessary for | Patrick Georgi |
2009-04-02 | Ronald Hoogenboom writes: | Ronald Hoogenboom |
2009-03-31 | This patch adds Jordan's romtool support for v2. | Ronald G. Minnich |
2009-03-30 | flashrom: Board enable support for HP DL145 G3. | Mondrian Nuessle |
2009-03-25 | - List SMSC LPC47N227 runtime register block as supported. | Uwe Hermann |
2009-03-23 | msrtool: If an MSR name lookup fails in msraddrbyname(), return the strtoul()... | Peter Stuge |
2009-03-19 | Move the Atmel AT45 comments about block and page sizes from the end of | Carl-Daniel Hailfinger |
2009-03-17 | Add support for high coreboot table to mkelfimage | Stefan Reinauer |
2009-03-17 | This patch adds "high coreboot table support" to coreboot version 2. | Stefan Reinauer |
2009-03-17 | This patch adds "high coreboot table support" to coreboot version 2. | Stefan Reinauer |
2009-03-15 | abuild: Don't forget CROSS_COMPILE anymore. | Stefan Reinauer |
2009-03-14 | trivial patch for abuild: allow powerpc-elf-gcc, too. | Stefan Reinauer |
2009-03-13 | this commit should fix Ticket #122 (proper log files for all builds) | Stefan Reinauer |
2009-03-11 | 20090310-3-scanbuild: | Patrick Georgi |
2009-03-11 | abuild: | Stefan Reinauer |
2009-03-11 | Add support for the LPC47M182 to superiotool | Stefan Reinauer |
2009-03-08 | Add some basic K8 MSRs. | Marc Jones |
2009-03-06 | FreeBSD definitions of (read|write)[bwl] collide with our own. Before we | Carl-Daniel Hailfinger |
2009-03-06 | During the conversion of flash chip accesses to helper functions, I | Carl-Daniel Hailfinger |
2009-03-05 | flashrom: Use helper functions to access flash chips. | Carl-Daniel Hailfinger |
2009-02-28 | coreboot-v2: drop this ugly historic union name in v2 that was dropped in v3 | Stefan Reinauer |
2009-02-28 | This is a small fix for the last checkin (does not fix those two boards) that | Stefan Reinauer |
2009-02-28 | With this patch the v2 build system will create a directory hierarchy | Stefan Reinauer |
2009-02-25 | flashrom: Add SST25VF040.REMS with TEST_OK_ PROBE READ | Zheng Bao |
2009-02-22 | flashrom: SST29EE020A TEST_OK_ PROBE READ ERASE WRITE | Peter Stuge |
2009-02-18 | Carl-Daniel's part: | Carl-Daniel Hailfinger |
2009-02-10 | Change 0x%p to %p. Thanks Stefan for catching the one I introduced in 3931. | Myles Watson |
2009-02-09 | flashrom: Fix broken flash chip base address logic | Peter Stuge |
2009-02-02 | flashrom: MSI MS-7046 board enable | Peter Stuge |
2009-02-01 | Following patch fixes VIA SPI (VT8237S). It needs to have opcodes | Rudolf Marek |
2009-01-28 | Factor out read and erase functions from flashrom main(). | Carl-Daniel Hailfinger |
2009-01-26 | msrtool: Allow MSR symbols (names) to also be used as addresses. | Peter Stuge |
2009-01-26 | msrtool: Linux /dev/cpu/*/msr returns the low 32 bits before the high 32 bits. | Peter Stuge |
2009-01-26 | flashrom: Add VT8237A PCI ID | Peter Stuge |
2009-01-26 | flashrom: Fix one dead increment and one dead assignment as found by clang. | Peter Stuge |
2009-01-26 | flashrom: Driver for ST M29F002T/NT/B. T/NT TEST_OK_ PROBE READ ERASE WRITE | Peter Stuge |
2009-01-26 | flashrom: Fix copypaste error in r3913. | Peter Stuge |
2009-01-26 | msrtool: AMD CS5536 probe implementation. | Peter Stuge |
2009-01-26 | msrtool: Make configure work with zsh, the default shell in Darwin. | Peter Stuge |
2009-01-26 | flashrom: SST25VF040B using 0x90 identification and AAI write. | Peter Stuge |
2009-01-26 | flashrom: Decode SST25VF040B status register, also from July 2008. | Peter Stuge |
2009-01-26 | flashrom: Intel Desktop Board D201GLY | Peter Stuge |
2009-01-26 | flashrom: Winbond SuperIO SPI driver. | Peter Stuge |
2009-01-26 | flashrom: Export Winbond SuperIO register access functions in board_enable.c. | Peter Stuge |
2009-01-26 | flashrom: Document exit() codes introduced in r3907. | Peter Stuge |
2009-01-26 | flashrom: exit(2) on /dev/mem open() failure and exit(3) on mmap() failure. | Peter Stuge |
2009-01-26 | flashrom: Add license header to physmap.c so everyone is happy. :) | Peter Stuge |
2009-01-26 | flashrom: Darwin / Mac OS X | Stefan Reinauer |
2009-01-26 | flashrom: Small cleanup in Makefile. | Peter Stuge |
2009-01-26 | flashrom: Abstract mmap() in physmap.c and only open /dev/mem on the first ph... | Stefan Reinauer |
2009-01-26 | flashrom: Change flashrom.c:map_flash_registers() from int to void. | Peter Stuge |
2009-01-26 | flashrom: Forgot some things in r3899. | Peter Stuge |
2009-01-26 | flashrom: Little readability improvement in cbtable.c:coreboot_init() | Peter Stuge |
2009-01-26 | flashrom: Change FreeBSD #ifdef into #if defined() | Stefan Reinauer |
2009-01-25 | flashrom: Make Makefile a bit more portable. Shell echo doesn't always know -n. | Peter Stuge |
2009-01-25 | flashrom: Add dry Am29F080B Am29LV081B SST39VF080 definitions per data sheets. | Peter Stuge |
2009-01-25 | flashrom: Beautify flash chip ID verbose printout a little, always use %02x. | Peter Stuge |
2009-01-25 | flashrom: Fix stupid off-by-one error in erase verification. | Peter Stuge |
2009-01-24 | flashrom: ST M50FW080 TEST_OK_ PROBE READ ERASE WRITE | Peter Stuge |
2009-01-24 | flashrom: SST25VF080B TEST_OK_PROBE | Peter Stuge |
2009-01-23 | flashrom: Check all mmap() calls and print helpful Linux error message. | Peter Stuge |
2009-01-22 | flashrom: Provide some hints for the user in case /dev/mem mmap fails. | Peter Stuge |
2009-01-19 | First shot at factoring SMM code into generic parts and southbridge specific | Stefan Reinauer |
2009-01-18 | flashrom: Fix ICH9 locking register address and add important debug output. | FENG yu ning |
2009-01-15 | flashrom: Add ICH opcode debugging. | Peter Stuge |
2009-01-15 | Similarly to flashchips array, this patch intends to make the table | Stephan Guilloux |
2009-01-13 | flashrom: Always print address when verification fails, not only with -V. | Peter Stuge |
2009-01-12 | flashrom: Board enable for GIGABYTE GA-MA78G-DS3H | Peter Stuge |
2009-01-12 | flashrom: IT8718F works just like IT8716F. | Peter Stuge |
2009-01-12 | flashrom: Check return value of fscanf()/fwrite()/fread() | Peter Stuge |
2009-01-11 | flashrom: Update usage in README | Idwer Vollering |
2009-01-08 | Add erase and write functions to the following chip definitions: | Carl-Daniel Hailfinger |
2009-01-08 | The flashrom man page has incomplete author/copyright sections and an | Carl-Daniel Hailfinger |
2009-01-08 | This patch improves machine parseability and human readability of | Stephan Guilloux |
2009-01-07 | Add SST49LF020 support. | Sven Schnelle |
2009-01-07 | Add AMD-768 chipset support. | Sven Schnelle |
2009-01-07 | Add i631x LPC support. | Sven Schnelle |
2008-12-22 | If you pass a bogus layout file to the -l option flashrom will segfault. | Uwe Hermann |
2008-12-22 | Add another board-enable line for the Kontron 986LCD-M/mITX. | Uwe Hermann |