summaryrefslogtreecommitdiff
path: root/util/sconfig/sconfig.tab.h_shipped
AgeCommit message (Collapse)Author
2022-11-24src/device + util/sconfig: Introduce new device 'mdio'Mario Scheithauer
This patch extends the available device paths with a new device 'mdio'. MDIO is the 'Management Data Input/Output' called interface which is used to access an Ethernet PHY behind a MAC to change settings. The real payload data path is not handled by this interface. To address the PHY correctly on the MDIO bus, there is a 5 bit address needed, which often can be configured via pins on the mainboard. Therefore, the new introduced device has an 'addr' field to define its address. If one wants to use a MDIO device in devicetree, the syntax is straight forward (example): device mdio 0x2 on end As the MDIO interface is driven by the MAC, most likely this MDIO device will be hooked in as a child device of the (PCI attached) MAC device. With the new introduced ops_mdio a new interface is added to provide an API for read and write access over MDIO. Change-Id: I6691f92c4233bc30afc9029840b06f74bb1eb4b2 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69382 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-15sconfig: Allow to specify device operationsNico Huber
Currently we only have runtime mechanisms to assign device operations to a node in our devicetree (with one exception: the root device). The most common method is to map PCI IDs to the device operations with a `struct pci_driver`. Another accustomed way is to let a chip driver assign them. For very common drivers, e.g. those in soc/intel/common/blocks/, the PCI ID lists grew very large and are incredibly error-prone. Often, IDs are missing and sometimes IDs are added almost mechanically without checking the code for compatibility. Maintaining these lists in a central place also reduces flexibility. Now, for onboard devices it is actually unnecessary to assign the device operations at runtime. We already know exactly what operations should be assigned. And since we are using chipset devicetrees, we have a perfect place to put that information. This patch adds a simple mechanism to `sconfig`. It allows us to speci- fy operations per device, e.g. device pci 00.0 alias system_agent on ops system_agent_ops end The operations are given as a C identifier. In this example, we simply assume that a global `struct device_operations system_agent_ops` exists. Change-Id: I2833d2f2450fde3206c33393f58b86fd4280b566 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66483 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-11-04SMBIOS/SCONFIG: Allow devtree-defined Type 41 entriesAngel Pons
Introduce the `smbios_dev_info` devicetree keyword to specify the instance ID and RefDes (Reference Designation) of onboard devices. Example syntax: device pci 1c.0 on # PCIe Port #1 device pci 00.0 on smbios_dev_info 6 end end device pci 1c.1 on # PCIe Port #2 device pci 00.0 on smbios_dev_info 42 "PCIe-PCI Time Machine" end end The `SMBIOS_TYPE41_PROVIDED_BY_DEVTREE` Kconfig option enables using this syntax to control the generated Type 41 entries. When this option is enabled, Type 41 entries are only autogenerated for devices with a defined instance ID. This avoids having to keep track of which instance IDs have been used for every device class. Using `smbios_dev_info` when `SMBIOS_TYPE41_PROVIDED_BY_DEVTREE` is not enabled will result in a build-time error, as the syntax is meaningless in this case. This is done with preprocessor guards around the Type 41 members in `struct device` and the code which uses the guarded members. Although the preprocessor usage isn't particularly elegant, adjusting the devicetree syntax and/or grammar depending on a Kconfig option is probably even worse. Change-Id: Iecca9ada6ee1000674cb5dd7afd5c309d8e1a64b Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57370 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-09-08sconfig: Ensure at least one `device` node below each `chip`Nico Huber
Even though `device` entries are children of `chip` entries in the devicetree source format, the chips in the translated C structures are only hooked up to device nodes. Hence, any chip with all its settings will be silently dropped by sconfig if there is no device node below it. Let's adapt the parser to ensure that there is at least one `device` entry. The intermediate `chipchildren_dev` rule applies until the first `device` entry is found, then everything continues as before with the `chipchildren` rule. Change-Id: I54830bc1fc7d00a0605f3fe4d36a83ef57ef3312 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51119 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-14util/sconfig: Remove unused devicetree keywords ESPI & LPCMartin Roth
The ESPI & LPC keywords were added for the zork program, but it was found that they weren't needed, so they were never used. BUG=None TEST=Build Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: I3a78afc55477d62eac8056e2ca4bcdd3ab12ea47 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56197 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-03util/sconfig: Add support for discontiguous FW_CONFIG fieldsTim Wawrzynczak
Sooner or later, some board was going to need extra FW_CONFIG bits for a field that was already in production, so this patch adds support for adding extra (unused) bits to a field. The extra are appended via a syntax like: `field FIELD_NAME START0 END0 | START1 END1 | START2 END2 ...` and the suffixed bits are all treated as if they are contiguous when defining option values. BUG=b:185190978 TEST=Modified volteer fw_config to the following: field AUDIO 8 10 | 29 29 | 31 31 option NONE 0 option MAX98357_ALC5682I_I2S 1 option MAX98373_ALC5682I_I2S 2 option MAX98373_ALC5682_SNDW 3 option MAX98373_ALC5682I_I2S_UP4 4 option MAX98360_ALC5682I_I2S 5 option RT1011_ALC5682I_I2S 6 option AUDIO_FOO 7 option AUDIO_BAR 8 option AUDIO_QUUX 9 option AUDIO_BLAH1 10 option AUDIO_BLAH2 15 option AUDIO_BLAH3 16 option AUDIO_BLAH4 31 end which yielded (in static_fw_config.h): FW_CONFIG_FIELD_AUDIO_MASK 0xa0000700 FW_CONFIG_FIELD_AUDIO_OPTION_NONE_VALUE 0x0 FW_CONFIG_FIELD_AUDIO_OPTION_MAX98357_ALC5682I_I2S_VALUE 0x100 FW_CONFIG_FIELD_AUDIO_OPTION_MAX98373_ALC5682I_I2S_VALUE 0x200 FW_CONFIG_FIELD_AUDIO_OPTION_MAX98373_ALC5682_SNDW_VALUE 0x300 FW_CONFIG_FIELD_AUDIO_OPTION_MAX98373_ALC5682I_I2S_UP4_VALUE 0x400 FW_CONFIG_FIELD_AUDIO_OPTION_MAX98360_ALC5682I_I2S_VALUE 0x500 FW_CONFIG_FIELD_AUDIO_OPTION_RT1011_ALC5682I_I2S_VALUE 0x600 FW_CONFIG_FIELD_AUDIO_OPTION_AUDIO_FOO_VALUE 0x700 FW_CONFIG_FIELD_AUDIO_OPTION_AUDIO_BAR_VALUE 0x20000000 FW_CONFIG_FIELD_AUDIO_OPTION_AUDIO_QUUX_VALUE 0x20000100 FW_CONFIG_FIELD_AUDIO_OPTION_AUDIO_BLAH1_VALUE 0x20000200 FW_CONFIG_FIELD_AUDIO_OPTION_AUDIO_BLAH2_VALUE 0x20000700 FW_CONFIG_FIELD_AUDIO_OPTION_AUDIO_BLAH3_VALUE 0x80000000 FW_CONFIG_FIELD_AUDIO_OPTION_AUDIO_BLAH4_VALUE 0xa0000700 Change-Id: I5ed76706347ee9642198efc77139abdc3af1b8a6 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52747 Reviewed-by: Duncan Laurie <duncan@iceblink.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-28device + util/sconfig: introduce new device `gpio`Michael Niewöhner
Introduce a new device `gpio` that is going to be used for generic abstraction of gpio operations in the devicetree. The general idea behind this is that every chip can have gpios that shall be accessible in a very generic way by any driver through the devicetree. The chip that implements the chip-specific gpio operations has to assign them to the generic device operations struct, which then gets assigned to the gpio device during device probing. See CB:48583 for how this gets done for the SoCs using intelblocks/gpio. The gpio device then can be added to the devicetree with an alias name like in the following example: chip soc/whateverlake device gpio 0 alias soc_gpio on end ... end Any driver that requires access to this gpio device needs to have a device pointer (or multiple) and an option for specifying the gpio to be used in its chip config like this: struct drivers_ipmi_config { ... DEVTREE_CONST struct device *gpio_dev; u16 post_complete_gpio; ... }; The device `soc_gpio` can then be linked to the chip driver's `gpio_dev` above by using the syntax `use ... as ...`, which was introduced in commit 8e1ea52: chip drivers/ipmi use soc_gpio as gpio_dev register "bmc_jumper_gpio" = "GPP_D22" ... end The IPMI driver can then use the generic gpio operations without any knowlege of the chip's specifics: unsigned int gpio_val; const struct gpio_operations *gpio_ops; gpio_ops = dev_get_gpio_ops(conf->gpio_dev); gpio_val = gpio_ops->get(conf->bmc_jumper_gpio); For a full example have a look at CB:48096 and CB:48095. This change adds the new device type to sconfig and adds generic gpio operations to the `device_operations` struct. Also, a helper for getting the gpio operations from a device after checking them for NULL pointers gets added. Successfully tested on Supermicro X11SSM-F with CB:48097, X11SSH-TF with CB:48711 and OCP DeltaLake with CB:48672. Change-Id: Ic4572ad8b37bd1afd2fb213b2c67fb8aec536786 Tested-by: Johnny Lin <Johnny_Lin@wiwynn.com> Tested-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: Patrick Rudolph <siro@das-labor.org> Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48582 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-10-09sconfig: Allow chipset to provide a base devicetreeDuncan Laurie
This change extends the devicetree override one more layer and allows the chipset to provide the base devicetree. This allows the chipset to assign alias names to devices as well as set default register values. This works for both the baseboard devicetree.cb as well as variant overridetree.cb. chipset.cb: device pci 15.0 alias i2c0 off end devicetree.cb: device ref i2c0 on end BUG=b:156957424 Change-Id: Ia7500a62f6211243b519424ef3834b9e7615e2fd Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44037 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-09-11sconfig: Allow to link devices to other device's driversNico Huber
Rarely, the driver of one device needs to know about another device that can be anywhere in the device hierarchy. Current applications boil down to EEPROMs that store information that is consumed by some code (e.g. MAC address). The idea is to give device nodes in the `devicetree.cb` an alias that can later be used to link it to a device driver's `config` structure. The driver has to declare a field of type `struct device *`, e.g. struct some_chip_driver_config { DEVTREE_CONST struct device *needed_eeprom; }; In the devicetree, the referenced device gets an alias, e.g. device i2c 0x50 alias my_eeprom on end The author of the devicetree is free to choose any alias name that is unique in the devicetree. Later, when configuring the driver the alias can be used to link the device with the field of a driver's config: chip some/chip/driver use my_eeprom as needed_eeprom end Override devices can add an alias if it does not exist, but cannot change the alias for a device that already exists. Alias names are checked for conflicts both in the base tree and in the override tree. References are resolved after the tree is parsed so aliases and references do not need to be in a specific order in the tree. Change-Id: I058a319f9b968924fbef9485a96c9e3f900a3ee8 Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35456 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-02sconfig: Add support for firmware configurationDuncan Laurie
This change adds support to sconfig for generating the firmware configuration field and option definitions in devicetree.cb. In addition these fields and options can be used to probe for a device and have that device be disabled if it is not found at boot time. New tokens: fw_config: top level token, table can be defined before chips field: define field in the mask with the start and end bits option: define option in a field with the value of the field probe: indicate that a device should probe by field and option Example: fw_config field FEATURE 0 0 option DISABLE 0 option ENABLE 1 end end chip drivers/generic/feature device generic 0 on probe FEATURE ENABLE end end Variants can add new fields and add new options to existing fields in overridetree.cb but cannot redefine an existing option. Devices can have multiple probe tokens, and the device will be considered to be found if any of them return true. The output from defining this field are: 1) the various fields and options will be added as macro constants to static.h and can be used by fw_config for probing. 2) the probe entries will result in a list of fields/options to probe that is added to the resulting struct device and handled by coreboot. BUG=b:147462631 Signed-off-by: Duncan Laurie <dlaurie@google.com> Change-Id: I8aea63e577d933aea09e0d0b09470929cc96e0de Reviewed-on: https://review.coreboot.org/c/coreboot/+/41440 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-05-12util/sconfig: Add LPC and ESPI busesRaul E Rangel
Picasso has an LPC and eSPI bridge on the same PCI DEVFN. They can both be active at the same time. This adds a way to specify which devices belong on which bus. i.e., device pci 14.3 on # - D14F3 bridge device espi 0 on chip ec/google/chromeec device pnp 0c09.0 on end end end device lpc 0 on end end BUG=b:154445472 TEST=Built trembyle and saw static.c contained the espi bus. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I0c2f40813c05680f72e5f30cbb13617e8f994841 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41099 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-05-05sconfig: Allow `register` entries below devices, tooNico Huber
Every device belongs to a chip. And we already keep that relation by inheriting the `.chip_info` pointer if downstream devices don't have another chip specified. So we can also allow to specify `register` settings at the device level. Change-Id: I44e6b95d0cd708fef69b152ebc46b869b2bb9205 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40803 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-08Add configurable ramstage support for minimal PCI scanningRonald G. Minnich
This CL has changes that allow us to enable a configurable ramstage, and one change that allows us to minimize PCI scanning. Minimal scanning is a frequently requested feature. To enable it, we add two new variables to src/Kconfig CONFIGURABLE_RAMSTAGE is the overall variable controlling other options for minimizing the ramstage. MINIMAL_PCI_SCANNING is how we indicate we wish to enable minimal PCI scanning. Some devices must be scanned in all cases, such as 0:0.0. To indicate which devices we must scan, we add a new mandatory keyword to sconfig It is used in place of on, off, or hidden, and indicates a device is enabled and mandatory. Mandatory devices are always scanned. When MINIMAL_PCI_SCANNING is enabled, ONLY mandatory devices are scanned. We further add support in src/device/pci_device.c to manage both MINIMAL_PCI_SCANNING and mandatory devices. Finally, to show how this works in practice, we add mandatory keywords to 3 devices on the qemu-q35. TEST= 1. This is tested and working on the qemu-q35 target. 2. On CML-Hatch Before CL: Total Boot time: ~685ms After CL: Total Boot time: ~615ms Change-Id: I2073d9f8e9297c2b02530821ebb634ea2a5c758e Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36221 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2019-05-07sconfig: Add SMBIOS type 9 entriesPatrick Rudolph
Add the new field 'smbios_slot_desc', which takes 2 to 4 arguments. The field is valid for PCI devices and only compiled if SMBIOS table generation is enabled. smbios_slot_desc arguments: 1. slot type 2. slot lenth 3. slot designation (optional) 4. slot data width (optional) Example: device pci 1c.1 on smbios_slot_desc "21" "3" "MINI-PCI-FULL" "8" end # PCIe Port #2 Integrated Wireless LAN Tested on Lenovo T520. Change-Id: If95aae3c322d3da47637613b9a872ba1f7af9080 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32307 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-09-16sconfig: Allow setting device status in device treeHung-Te Lin
For devices supporting both Linux and Windows, we may find some ACPI devices that only need drivers in Linux and should not even be shown in Windows Device Manager UI. The new 'hidden' keyword in device tree 'device' statement allows devices sharing same driver to call acpi_gen_writeSTA with different values. BUG=b:72200466 BRANCH=eve TEST=Builds and boots properly on device eve Change-Id: Iae881a294b122d3a581b456285d2992ab637fb8e Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/28566 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-06-08util/sconfig: Re-factor device structure in parse treeFurquan Shaikh
This change re-factors the device structure in parse tree to be able to support multidev devices just like non-multidev devices. With this change, every device has a bus under it which is the parent of all devices that fall on the bus. If there are duplicate entries in the devicetree, then there will be multiple buses under the device and each bus will have its own set of children. The tree starts out with a root device which has a root bus under it. This is a special device which is created statically and its parent is its own root bus. When parsing the device tree file, devices get added under the root bus as children. Since this change re-organizes the way devicetree is represented, it gets rid of latestchild and next_sibling pointers from struct device. Also, the tree traversal to generate static.c is changed to breadth-first walk instead of using the next_sibling. BUG=b:80081934 TEST=Verified using abuild that all boards compile successfully. Change-Id: Ic8c8a73a247e8e992ab6b1b2cc3131e06fa2e5a1 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/26800 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-06-05util/sconfig: Get rid of struct headerFurquan Shaikh
Now that chips and devices are treated differently in sconfig, this change gets rid of struct header and add_header function which were responsible for maintaining list of headers that need to be added to static.c. Instead, struct chip is re-factored into struct chip and struct chip_instance, where chip is a list of unique chips required by the mainboard whereas chip_instance is an instance of the chip. One chip can have multiple instances dependending upon the devices in the system. Also, struct device is updated to hold a pointer to chip instance instead of the chip structure. This unique list of chips is then used to add appropriate headers to static.c BUG=b:80081934 TEST=Verified using abuild that all boards compile successfully. Change-Id: I6fccdf7c361b4f55a831195adcda9b21932755aa Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/26739 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-05util/sconfig: Re-factor sconfig to not assume chip as deviceFurquan Shaikh
This change adds a new structure "struct chip" to identify elements of type chip rather than re-using the structure for device. Until now chip was treated as a device while generating the parse tree and then device tree postprocessing skipped over all the chip entries in children and sibling pointers of device nodes. With this change, the device tree will only contain struct device in the parsed tree. It helps by avoiding unnecessary pointers to chip structure as children or next_sibling and then skipping those elements in post processing. Every device can then hold a pointer to its chip. When generating static.c, chip structure is emitted before device structure to ensure that the device structure has chip within its scope. Externally, the only visible change in static.c should be the order in which chip/device elements are emitted i.e. previously all chips under a particular device were emitted to static.c and then the devices using those chips. Now, all chips are emitted before all the devices in static.c BUG=b:80081934 TEST=Verified that abuild is successful for all boards. Also, verified that static.c generated for eve, kahlee, scarlet, asrock imb_a180 is unchanged from before in node definitions. Change-Id: I255092f527c8eecb144385eb681df20e54caf8f5 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/26720 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-05-11devicetree: Add USB device typeDuncan Laurie
This commit adds support for describing USB ports in devicetree.cb. It allows a USB port location to be described in the tree with configuration information, and ACPI code to be generated that provides this information to the OS. A new scan_usb_bus() is added that will scan bridges for devices so a tree of ports and hubs can be created. The device address is computed with a 'port type' and a 'port id' which is flexible for SOC to handle depending on their specific USB setup and allows USB2 and USB3 ports to be described separately. For example a board may have devices on two ports, one with a USB2 device and one with a USB3 device, both of which are connected to an xHCI controller with a root hub: xHCI | RootHub | | USB2[0] USB3[2] device pci 14.0 on chip drivers/usb/acpi register "name" = ""Root Hub"" device usb 0.0 on chip drivers/usb/acpi register "name" = ""USB 2.0 Port 0"" device usb 2.0 on end end chip drivers/usb/acpi register "name" = ""USB 3.0 Port 2"" device usb 3.2 on end end end end end Change-Id: I64e6eba503cdab49be393465b535e139a8c90ef4 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/26169 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-01-25sconfig: Add a new mmio resource typeJustin TerAvest
Add support for a mmio resource in the devicetree to allow memory-mapped IO addresses to be assigned to given values. AMD platforms perform a significant amount of configuration through these MMIO addresses, including I2C bus configuration. BUG=b:72121803 Change-Id: I5608721c22c1b229f527815b5f17fff3a080c3c8 Signed-off-by: Justin TerAvest <teravest@chromium.org> Reviewed-on: https://review.coreboot.org/23319 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-02-16sconfig: Add a new "SPI" device typeFurquan Shaikh
Update sconfig lex and yacc files to add support for a new "SPI" device type in the devicetree. SPI device takes only parameter i.e. chip select number for the device on the SPI bus. Re-generate the shipped files for sconfig using flex 2.6.0 and bison 3.0.4 (make CONFIG_SCONFIG_GENPARSER=1). Clean up local paths that leak into generated files. BUG=chrome-os-partner:59832 BRANCH=None TEST=Compiles successfully. Change-Id: If0831e25b3e4ed87827ad92356d7bf47b6387884 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/18339 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-05-16sconfig: Add a new generic device typeDuncan Laurie
Add support for a basic generic device in the devicetree to bind to a device that does not have a specific bus, but may need to be described in tables for the operating system. For instance some chips may have various GPIO connections that need described but do not fall under any other device. In order to support this export the basic 'scan_static_bus()' that can be used in a device_operations->scan_bus() method to scan for the generic devices. It has been possible to get a semi-generic device by using a fake PNP device, but that isn't really appropriate for many devices. Also Re-generate the shipped files for sconfig. Use flex 2.6.0 to avoid everything being rewritten. Clean up the local paths that leak into the generated configs. Change-Id: If45a5b18825bdb2cf1e4ba4297ee426cbd1678e3 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/14789 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
2016-05-08util/sconfig: Fix warningsStefan Reinauer
and re-generate _shipped files Change-Id: I7a18824d64d3f6212e8566695376bf97e2196ee2 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14733 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2015-06-08Remove empty lines at end of fileElyes HAOUAS
Used command line to remove empty lines at end of file: find . -type f -exec sed -i -e :a -e '/^\n*$/{$d;N;};/\n$/ba' {} \; Change-Id: I816ac9666b6dbb7c7e47843672f0d5cc499766a3 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: http://review.coreboot.org/10446 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2014-10-07sconfig: add cpu device typeAaron Durbin
In order to enumerate CPU devices that are non-x86 (read: no lapic) provide a generic 'cpu' device. Change-Id: Ifeafdad8076935c3448784e6958117002509acbf Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/6824 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-02-14sconfig: rename lapic_cluster -> cpu_clusterStefan Reinauer
The name lapic_cluster is a bit misleading, since the construct is not local APIC specific by concept. As implementations and hardware change, be more generic about our naming. This will allow us to support non-x86 systems without adding new keywords. Change-Id: Icd7f5fcf6f54d242eabb5e14ee151eec8d6cceb1 Signed-off-by: Stefan Reinauer <reinauer@google.com> Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2377 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-02-14sconfig: rename pci_domain -> domainStefan Reinauer
The name pci_domain was a bit misleading, since the construct is only PCI specific in a particular (northbridge/cpu) implementation, but not by concept. As implementations and hardware change, be more generic about our naming. This will allow us to support non-PCI systems without adding new keywords. Change-Id: Ide885a1d5e15d37560c79b936a39252150560e85 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2376 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-13MPTAPLE: generate from devicetree.cbSven Schnelle
This patch adds support for autogenerating the MPTABLE from devicetree.cb. This is done by a write_smp_table() declared weak in mpspec.c. If the mainboard doesn't provide it's own function, this generic implementation is called. Syntax in devicetree.cb: ioapic_irq <APICID> <INTA|INTB|INTC|INTD> <INTPIN> The ioapic_irq directive can be used in pci and pci_domain devices. If there's no directive, the autogen code traverses the tree back to the pci_domain and stops at the first device which such a directive, and use that information to generate the entry according to PCI IRQ routing rules. Change-Id: I4df5b198e8430f939d477c14c798414e398a2027 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/1138 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-03-01Add subsystemid option to sconfigSven Schnelle
Allow user to add 'subsystemid <vendor> <device> [inherit]' to devicetree.cb for PCI and PCI domain devices. Example: device pci 00.0 on subsystemid dead beef end If the user wants to have this ID inherited to all subdevices/functions, he can add 'inherit', like in the following example: device pci 00.0 on subsystemid dead beef inherit end If the user don't want to inherit a Subsystem for a single device, he can specify 'subsystemid 0 0' on this particular device. Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6420 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-05-05Split C code in sconfig's parser into a separate file.Patrick Georgi
Update generated parser files. Add proper include path for utils. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5523 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-27Since some people disapprove of white space cleanups mixed in regular commitsStefan Reinauer
while others dislike them being extra commits, let's clean them up once and for all for the existing code. If it's ugly, let it only be ugly once :-) Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5507 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-08Remove #line statements in processed parser source,Patrick Georgi
to avoid clutter in revision history. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5377 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-08Replace sconfig with a C implementation.Patrick Georgi
(smaller, faster, standard parser generator, no more python) Provide precompiled parser, so bison and flex are optional dependencies. Adapt Makefile and abuild (which uses some sconfig file as a magic path) to match. Drop python as dependency from README, and add bison and flex as optional dependencies Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5373 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1