summaryrefslogtreecommitdiff
path: root/util/flashrom
AgeCommit message (Expand)Author
2009-04-11Mention a few more flash chip packages in README/manpage.Uwe Hermann
2009-04-10Fix typo.Uwe Hermann
2009-04-10Various manpage / README fixes:Uwe Hermann
2009-04-09Fixed the typo should indeed be a 0x2e.Mondrian nuessle
2009-03-30flashrom: Board enable support for HP DL145 G3.Mondrian Nuessle
2009-03-19Move the Atmel AT45 comments about block and page sizes from the end ofCarl-Daniel Hailfinger
2009-03-17This patch adds "high coreboot table support" to coreboot version 2.Stefan Reinauer
2009-03-06FreeBSD definitions of (read|write)[bwl] collide with our own. Before weCarl-Daniel Hailfinger
2009-03-06During the conversion of flash chip accesses to helper functions, ICarl-Daniel Hailfinger
2009-03-05flashrom: Use helper functions to access flash chips.Carl-Daniel Hailfinger
2009-02-25flashrom: Add SST25VF040.REMS with TEST_OK_ PROBE READZheng Bao
2009-02-22flashrom: SST29EE020A TEST_OK_ PROBE READ ERASE WRITEPeter Stuge
2009-02-09flashrom: Fix broken flash chip base address logicPeter Stuge
2009-02-02flashrom: MSI MS-7046 board enablePeter Stuge
2009-02-01 Following patch fixes VIA SPI (VT8237S). It needs to have opcodesRudolf Marek
2009-01-28Factor out read and erase functions from flashrom main().Carl-Daniel Hailfinger
2009-01-26flashrom: Add VT8237A PCI IDPeter Stuge
2009-01-26flashrom: Fix one dead increment and one dead assignment as found by clang.Peter Stuge
2009-01-26flashrom: Driver for ST M29F002T/NT/B. T/NT TEST_OK_ PROBE READ ERASE WRITEPeter Stuge
2009-01-26flashrom: Fix copypaste error in r3913.Peter Stuge
2009-01-26flashrom: SST25VF040B using 0x90 identification and AAI write.Peter Stuge
2009-01-26flashrom: Decode SST25VF040B status register, also from July 2008.Peter Stuge
2009-01-26flashrom: Intel Desktop Board D201GLYPeter Stuge
2009-01-26flashrom: Winbond SuperIO SPI driver.Peter Stuge
2009-01-26flashrom: Export Winbond SuperIO register access functions in board_enable.c.Peter Stuge
2009-01-26flashrom: Document exit() codes introduced in r3907.Peter Stuge
2009-01-26flashrom: exit(2) on /dev/mem open() failure and exit(3) on mmap() failure.Peter Stuge
2009-01-26flashrom: Add license header to physmap.c so everyone is happy. :)Peter Stuge
2009-01-26flashrom: Darwin / Mac OS XStefan Reinauer
2009-01-26flashrom: Small cleanup in Makefile.Peter Stuge
2009-01-26flashrom: Abstract mmap() in physmap.c and only open /dev/mem on the first ph...Stefan Reinauer
2009-01-26flashrom: Change flashrom.c:map_flash_registers() from int to void.Peter Stuge
2009-01-26flashrom: Forgot some things in r3899.Peter Stuge
2009-01-26flashrom: Little readability improvement in cbtable.c:coreboot_init()Peter Stuge
2009-01-26flashrom: Change FreeBSD #ifdef into #if defined()Stefan Reinauer
2009-01-25flashrom: Make Makefile a bit more portable. Shell echo doesn't always know -n.Peter Stuge
2009-01-25flashrom: Add dry Am29F080B Am29LV081B SST39VF080 definitions per data sheets.Peter Stuge
2009-01-25flashrom: Beautify flash chip ID verbose printout a little, always use %02x.Peter Stuge
2009-01-25flashrom: Fix stupid off-by-one error in erase verification.Peter Stuge
2009-01-24flashrom: ST M50FW080 TEST_OK_ PROBE READ ERASE WRITEPeter Stuge
2009-01-24flashrom: SST25VF080B TEST_OK_PROBEPeter Stuge
2009-01-23flashrom: Check all mmap() calls and print helpful Linux error message.Peter Stuge
2009-01-22flashrom: Provide some hints for the user in case /dev/mem mmap fails.Peter Stuge
2009-01-18flashrom: Fix ICH9 locking register address and add important debug output.FENG yu ning
2009-01-15flashrom: Add ICH opcode debugging.Peter Stuge
2009-01-15Similarly to flashchips array, this patch intends to make the tableStephan Guilloux
2009-01-13flashrom: Always print address when verification fails, not only with -V.Peter Stuge
2009-01-12flashrom: Board enable for GIGABYTE GA-MA78G-DS3HPeter Stuge
2009-01-12flashrom: IT8718F works just like IT8716F.Peter Stuge
2009-01-12flashrom: Check return value of fscanf()/fwrite()/fread()Peter Stuge
2009-01-11flashrom: Update usage in READMEIdwer Vollering
2009-01-08Add erase and write functions to the following chip definitions:Carl-Daniel Hailfinger
2009-01-08The flashrom man page has incomplete author/copyright sections and anCarl-Daniel Hailfinger
2009-01-08This patch improves machine parseability and human readability ofStephan Guilloux
2009-01-07Add SST49LF020 support.Sven Schnelle
2009-01-07Add AMD-768 chipset support.Sven Schnelle
2009-01-07Add i631x LPC support.Sven Schnelle
2008-12-22If you pass a bogus layout file to the -l option flashrom will segfault.Uwe Hermann
2008-12-22Add another board-enable line for the Kontron 986LCD-M/mITX.Uwe Hermann
2008-12-22flashrom: Initialize ICH SPI opcodes also for ICH9 and later.Peter Stuge
2008-12-15* add a generic preop-opcode-pair table.FENG yu ning
2008-12-10Add 28 flash chips of the MX29 series to the flashrom ID table andCarl-Daniel Hailfinger
2008-12-08Kill obsolete and misplaced comment.Carl-Daniel Hailfinger
2008-12-08Generates OPCODES struct from the ICH7/ICH9/VIA chipset if its SPIFENG yu ning
2008-12-08Breaks chip info into multiple lines.FENG yu ning
2008-12-06flashrom: Display test status in -L chip listingPeter Stuge
2008-12-05flashrom: Add AMD SB700 flash enableNiels Ole Salscheider
2008-12-05flashrom: Fix compilation of r3797 with gcc-4.3.2Peter Stuge
2008-12-05flashrom: Check if erase succeeds and exit with error on failure.Peter Stuge
2008-12-04Add RDID/REMS IDs for the following flash chips:Carl-Daniel Hailfinger
2008-12-03flashrom: gcc thinks base could be used uninitialized, so shut it up.Peter Stuge
2008-12-03flashrom: Fix bug in r3790Peter Stuge
2008-12-03Replace #ifdefs for sc520 systems by run time probing.Stefan Reinauer
2008-11-29Copyright update by Jason Wang for freshly written sb600 code.Jason WangQingpei.wang
2008-11-28Declare special commands to support the Atmel AT25F512A.Carl-Daniel Hailfinger
2008-11-28If a chip has any TEST_BAD_* flag set, we don't even list theCarl-Daniel Hailfinger
2008-11-28Add support for the AMD/ATI SB600 southbridge SPI functionality.Jason Wang
2008-11-28Add SST25VF080B flash chip support.Jason Wang
2008-11-28Flashrom already has the following probe functions:Carl-Daniel Hailfinger
2008-11-27The existing check in probe_spi_res() was right for SPI controllersCarl-Daniel Hailfinger
2008-11-24Add support for 32Mbit SPI flash SST25VF032B. Tested on gigabyte m57sli.Tero O Peippola
2008-11-18Currently flashrom assumes every vendor BIOS shares our view about whichCarl-Daniel Hailfinger
2008-11-18Check for failed SPI command execution in flashrom. Although SPI itselfCarl-Daniel Hailfinger
2008-11-18Implement read support for the following Atmel chips:Carl-Daniel Hailfinger
2008-11-17flashrom: SST39VF020 TEST_OK_ PROBE READ ERASE WRITEMart Raudsepp
2008-11-15The AT25 and AT26 series SPI chips from Atmel are plain EEPROMs.Carl-Daniel Hailfinger
2008-11-08flashrom: SST39SF040 TEST_OK_ PROBE READ ERASE WRITEPeter Stuge
2008-11-05The ST M25P16 chip has been confirmed to work fine for probe, read,Carl-Daniel Hailfinger
2008-11-04Add support for 8 new chips to flashrom and fix up 2 existing chipsCarl-Daniel Hailfinger
2008-11-03Dump ICH8/ICH9/ICH10 SPI registers in flashrom.Carl-Daniel Hailfinger
2008-11-03Add additional SPI sector erase and chip erase command functions toCarl-Daniel Hailfinger
2008-11-02Drop nr/opcode_index parameter from run_opcode and search the opmenu for the ...Stefan Reinauer
2008-11-02Add support for the ST M50FW002 chip to flashrom. Identification only,Carl-Daniel Hailfinger
2008-10-30Mark two more chips as fully tested (trivial).Uwe Hermann
2008-10-29Flashrom support for some Numonyx parts (M25PE)Stefan Reinauer
2008-10-29Enable SPI boot flash support on EP80579, which has the ICH7 register setEd Swierk
2008-10-28Mark Winbond W39V040FA" (512 KB) as fully supported, tested byUwe Hermann
2008-10-28Add support for the Intel 82371MX (MPIIX) southbridge (trivial).Uwe Hermann
2008-10-26Add support for the Intel 82371FB PIIX and 82371SB (PIIX3) southbridges.Uwe Hermann
2008-10-25Add support for the VIA VT82C586A/B chipset, improve documentation.Uwe Hermann