summaryrefslogtreecommitdiff
path: root/util/flashrom
AgeCommit message (Expand)Author
2008-05-26Mark the following chips as tested (trivial).Uwe Hermann
2008-05-22A bunch of cosmetic improvements (trivial).Uwe Hermann
2008-05-22Mark more chips as tested (all operations), tested on ASUS P4B266 (trivial).Uwe Hermann
2008-05-22Add support for the ASUS P4B266 board.Uwe Hermann
2008-05-22Add support for Amic A25L40P SPI flash.Rudolf Marek
2008-05-22Changes to make flashrom compile (and work) on FreeBSD.Andriy Gapon
2008-05-21Myles reported SST49LF080A status -> TESTED_PREWPeter Stuge
2008-05-17flashrom: Support Pm49FL004/2 Block Locking RegistersNikolay Petukhov
2008-05-16I looked at the datasheet and erase_sector_39sf020() is totally andCarl-Daniel Hailfinger
2008-05-16ICH8 and ICH9 have an almost identical SPI interface, only the locationCarl-Daniel Hailfinger
2008-05-16Add support for the Atmel AT25DF321 SPI flash (tested).Dominik Geyer
2008-05-16Add support for SPI chips on ICH9. This is done by using the generic SPIDominik Geyer
2008-05-16Enable IT8716F LPC-to-SPI write cycle translation in flashrom if theCarl-Daniel Hailfinger
2008-05-15Print detailed status register information for SST25VF series flash.Carl-Daniel Hailfinger
2008-05-15Lots of new SST flash chip IDs. Only a subset has been added toCarl-Daniel Hailfinger
2008-05-15Add support for the JEDEC RES (Read Electronic Signature and Resume fromCarl-Daniel Hailfinger
2008-05-14Add more infrastructure for flashrom ICH9 support.Carl-Daniel Hailfinger
2008-05-14Add the Intel 6300ESB as known chipset to the chipset struct enables.Claus Gindhart
2008-05-14Fix crash caused by division by zero for unknown flash chips.Carl-Daniel Hailfinger
2008-05-14Check the JEDEC vendor ID for correct parity. Flash chips which can beCarl-Daniel Hailfinger
2008-05-14Add lots of ATMEL SPI flash chips to flash.h.Carl-Daniel Hailfinger
2008-05-13flashrom: Move all IT87xx specific SPI routines from spi.c to a separateCarl-Daniel Hailfinger
2008-05-13flashrom: Move the SPI #defines from spi.c to spi.hCarl-Daniel Hailfinger
2008-05-13Change the SPI parts of flashrom to prepare for a merge ofCarl-Daniel Hailfinger
2008-05-12MX25L3205 and W25x40 have been confirmed to probe/read/erase/write OKCarl-Daniel Hailfinger
2008-05-12Add SST39VF512, SST39VF010, SST39VF040 support to flashrom. The SST39LFCarl-Daniel Hailfinger
2008-05-10Improve flashrom SPI abstraction, second step.Carl-Daniel Hailfinger
2008-05-10flashrom: Rename generic_spi_*() functions to spi_*()Peter Stuge
2008-05-08flashrom: Probe for up to 3 flash chips.Claus Gindhart
2008-05-03flashrom: Add a tested bitmap field to the flash chip table.Peter Stuge
2008-04-29flashrom: Enable ROM decode range to 1MB for vt8237rBari Ari
2008-04-28The generic jedec.c does not work for the ST M50FLW flashClaus Gindhart
2008-04-28flashrom: Handle NULL probe, erase and write function pointers in thePeter Stuge
2008-04-24Flash pages, which where excluded from updating using the exclude or theClaus Gindhart
2008-04-07ST M50FW016 and ST M50FW040 support the 82802ab command set, not jedec.Ed Swierk
2008-03-18Add ICH9 detection to flashrom. Straight from the datasheet, untested.Carl-Daniel Hailfinger
2008-03-18oops. forgot to add the file.Stefan Reinauer
2008-03-17Support for the Winbond W39V080FA series of chips.Stefan Reinauer
2008-03-16check whether SST FWH chip was successfully erased on flashchip -E, tooStefan Reinauer
2008-03-16Sort list of flash chips alphabetically, add comment (trivial).Uwe Hermann
2008-03-15remove nasty warning that happened due to our vendor detectionStefan Reinauer
2008-03-14Re-add code erroneously removed in r3140.Uwe Hermann
2008-03-14Changes M50FW080 to use 82802ab.c instead of jedec.c. This fixes the problem ...Joseph Smith
2008-03-14Prepare for ICH7/ICH8 SPI support by adding some debugging for allCarl-Daniel Hailfinger
2008-03-14Fix broken flashrom build.Uwe Hermann
2008-03-14Fix up one forgotten revert in r3140.Carl-Daniel Hailfinger
2008-03-14Revert the delete of 82802ab.c in r3137.Carl-Daniel Hailfinger
2008-03-13Also print the chip vendor name in --list-supported output (trivial).Uwe Hermann
2008-03-13Also print the required -m option in --list-supported output (trivial).Uwe Hermann
2008-03-13Drop 82802ab.c as it is identical to sharplhf00l04.c.Carl-Daniel Hailfinger
2008-03-12Drop the useless rom.layout file. It's just an example, likely neverUwe Hermann
2008-03-12Add --list-supported option to flashrom which lists the supportedUwe Hermann
2008-03-04Add missing license header to layout.c. The file was written byUwe Hermann
2008-02-20flashrom: Add board_enable for Artec Group DBE61 and DBE62Mart Raudsepp
2008-02-14With this small change it is possible to build flashrom again whenClark Rawlins
2008-02-11flashrom: further cleanups to enable_flash_cs5536Mart Raudsepp
2008-02-09Flashrom: Add board enable for VIA EPIA SP.Luc Verhaegen
2008-02-08Improve error handling and make RCONF_DEFAULT_MSR address be a constant.Mart Raudsepp
2008-02-08This implements support for devices using AMD Geode companion chipMart Raudsepp
2008-02-06Handle JEDEC JEP106W continuation codes in SPI RDID. Some vendors likeCarl-Daniel Hailfinger
2008-01-27Make the vendor name optional in the -m flashrom parameter when there's onlyPeter Stuge
2008-01-27Forgot to add Spansion S25FL016A to README, trivial.Peter Stuge
2008-01-26Correctly disable the ROM area Write Protect bit in the Geode LX.Marc Jones
2008-01-25Add ids and chip entry for Spansion S25FL016A to flashrom, tested,Peter Stuge
2008-01-22Here is just a little and simple patch to get the MX25L3205D working.Harald Gutmann
2008-01-22Flashrom did not use the read function for verifying, it used direct memoryCarl-Daniel Hailfinger
2008-01-22Make sure we delay writing the next byte long enough in SPI byteCarl-Daniel Hailfinger
2008-01-21Omitting the wait for SPI ready when there is no data to be read, e.g.Ronald Hoogenboom
2008-01-21This patch adds version information to flashrom. Because 'v' and 'V'Bernhard Walle
2008-01-19Support SPI flash chips bigger than 512 kByte sitting behind IT8716FRonald Hoogenboom
2008-01-18Minor documentation improvements/fixes in the README and manpage (trivial).Uwe Hermann
2008-01-18rename linuxbios_* files in utils repository.Stefan Reinauer
2008-01-18for some reasons the externals did not get committed.Stefan Reinauer
2008-01-11This patch removes '\n' from the help output since this looks a bit strange.Bernhard Walle
2008-01-10Enable MX25L8005 support in flashrom. The #defines were already there.Harald Gutmann
2008-01-07Add support for the SST25VF040B 4 Mbit SPI flash chip.Carl-Daniel Hailfinger
2008-01-04Add board enable for the gigabyte ga_2761gxdk boardRonald G. Minnich
2008-01-04Print at least the vendor for SPI flash chips if the exact chip ID isCarl-Daniel Hailfinger
2007-12-31Unfortunately, EN29F002T, EN29F002AT, EN29F002ANT, EN29F002NT all haveCarl-Daniel Hailfinger
2007-12-31Add continuation ID support to jedec.cCarl-Daniel Hailfinger
2007-12-31This fixes a few vendor IDs to conform with JEDEC publication 106WCarl-Daniel Hailfinger
2007-12-29All SPI chips mentioned in flashchips.c had their sector size listed asCarl-Daniel Hailfinger
2007-12-29Print the chip status register for all SPI chips on probe if verboseCarl-Daniel Hailfinger
2007-12-29Add 25VF016B support to flashrom. Untested, but verified against theCarl-Daniel Hailfinger
2007-12-17Add support for ST M25P05-A, M25P10-A, M25P20, M25P40, M25P16, M25P32,Carl-Daniel Hailfinger
2007-12-17To make it easier to add new SPI chips to flashchips.c, rename functionsCarl-Daniel Hailfinger
2007-12-16Add support for ST M25P80 chips to flashrom. Detection was tested.Carl-Daniel Hailfinger
2007-12-10Add support for more atmel chips:Frederico Silva
2007-12-04Various coding style fixes, constification, fixed typos (trivial).Uwe Hermann
2007-12-02Add board-enable for Acorp 6A815EPD.Jonathan A. Kollasch
2007-11-13[LinuxBIOS] flashrom support for AMD Geode CS5536Lane Brooks
2007-11-13Fix ATMEL 29C020 detection with flashrom. The JEDEC probe routine hadCarl-Daniel Hailfinger
2007-10-30Add support for Intel 440MX systems.Uwe Hermann
2007-10-25Added Am29LV040BPeter Lemenkov
2007-10-22Flashrom: Add more Vendor IDs and ensure correct sorting in flash.h.Peter Lemenkov
2007-10-22Introduce block and sector erase routines to flashrom, but do not useCarl-Daniel Hailfinger
2007-10-18Remove hardcoded wait from SPI write/erase routines and check the chipCarl-Daniel Hailfinger
2007-10-18Documentation fixes and updates (trivial).Uwe Hermann
2007-10-18Add generic SPI flash erase and write support to flashrom. The firstCarl-Daniel Hailfinger
2007-10-17Some cosmetic cleanups in the flashrom code and output.Uwe Hermann