aboutsummaryrefslogtreecommitdiff
path: root/util/flashrom/board_enable.c
AgeCommit message (Collapse)Author
2008-07-21flashrom: Winbond W39V040C and MSI K8T Neo2-FPeter Stuge
W39V040C does standard JEDEC commands except chip erase so add a small driver. probe_w39v040c() prints the block lock pin status when a chip is found. The Neo2 board enable matches on 8237-internal IDE and onboard NIC PCI IDs. Many thanks to Daniel McLellan for testing all of this on hardware! Build tested by Uwe. Signed-off-by: Peter Stuge <peter@stuge.se> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3431 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-07-05flashrom: Add PCI IDs for EPIA-CNPeter Stuge
Uses the 0.0 Host bridge CN700/VN800/P4M800CE/Pro and 11.0 ISA bridge devices with their 1106:aa08 subsystem id:s for autodetection. Signed-off-by: Peter Stuge <peter@stuge.se> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3413 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-07-02flashrom: Unknown vendor:board message can be triggered by -m tooPeter Stuge
Thanks to Stefan for pointing this one out. Signed-off-by: Peter Stuge <peter@stuge.se> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3403 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-07-02flashrom: Case insensitive matching of vendor:board strings in coreboot tablePeter Stuge
Needed at least for GIGABYTE:m57sli in coreboot to match gigabyte:m57sli in flashrom. Signed-off-by: Peter Stuge <peter@stuge.se> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3402 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-06-13flashrom: Board enable and autodetection for GIGABYTE GA-7VT600Peter Stuge
Uses the VT8237 ISA bridge with mainboard subsystem ID and Realtek 8139 with mainboard subsystem ID for board detection. Signed-off-by: Peter Stuge <peter@stuge.se> Acked-by: Lyos Gemini Norezel <lyos.gemininorezel@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3366 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-06-11flashrom: Board enable and autodetection for BioStar P4M80-M4.Peter Stuge
Thanks to Reinder for clean room reverse engineering and data sheet diving! This board is autodetected because there are some good BioStar subsystem IDs. Matching uses onboard VT6420 SATA RAID with subsystem BioStar 3206 and onboard UniChrome Pro IGP graphics with subsystem BioStar 1202. Signed-off-by: Peter Stuge <peter@stuge.se> Acked-by: Lyos Gemini Norezel <lyos.gemininorezel@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3364 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-05-22A bunch of cosmetic improvements (trivial).Uwe Hermann
- Fix typos and inconsistencies. - Drop duplicate line which tells us the chip name twice. - Also print the chip vendor, not only the name. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3348 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-05-22Add support for the ASUS P4B266 board.Uwe Hermann
Tested on actual hardware. This patch add an ich_gpio_raise() function which can be re-used by other board-specific funtions which need to raise GPIOs on ICHx southbridges. This also fixes bug #7, see http://tracker.coreboot.org/trac/coreboot/ticket/7, as it turned out the ICH2 (and other ICHx) code works fine. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3346 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-05-22Changes to make flashrom compile (and work) on FreeBSD.Andriy Gapon
This patch addresses different argument order of outX() calls, FreeBSD-specific headers, difference in certain type names and system interface names, and also FreeBSD-specific way of gaining IO port access. Signed-off-by: Andriy Gapon <avg@icyb.net.ua> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3344 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-03-17Support for the Winbond W39V080FA series of chips.Stefan Reinauer
Support for flashing on the Kontron 986LCD-M board. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3165 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-03-13Also print the required -m option in --list-supported output (trivial).Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3138 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-03-12Add --list-supported option to flashrom which lists the supportedUwe Hermann
ROM chips, chipsets, and mainboards (Closes #90). Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Ward Vandewege <ward@gnu.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3133 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-02-20flashrom: Add board_enable for Artec Group DBE61 and DBE62Mart Raudsepp
Also add a comment about NULL subsystem IDs leaving the board entry out of auto-detection logic. Signed-off-by: Mart Raudsepp <mart.raudsepp@artecdesign.ee> Acked-by: Luc Verhaegen <libv@skynet.be> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3110 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-02-09Flashrom: Add board enable for VIA EPIA SP.Luc Verhaegen
Signed-off-by: Luc Verhaegen <libv@skynet.be> Acked-by: Corey Osgood <corey.osgood@gmail.com> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3099 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-01-27Make the vendor name optional in the -m flashrom parameter when there's onlyPeter Stuge
one board name that matches. The full syntax still works, and is required when two vendors have boards with the same names. Signed-off-by: Peter Stuge <peter@stuge.se> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3082 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-01-18for some reasons the externals did not get committed.Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3054 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-01-04Add board enable for the gigabyte ga_2761gxdk boardRonald G. Minnich
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3033 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-12-04Various coding style fixes, constification, fixed typos (trivial).Uwe Hermann
Also, s/0xFF80/0xFFC0/ in the Acorp 6A815EPD board-enable, as per http://www.linuxbios.org/pipermail/linuxbios/2007-December/027750.html Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2997 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-12-02Add board-enable for Acorp 6A815EPD.Jonathan A. Kollasch
Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Acked-by: Ronald G. Minnich <rminnich@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2995 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-17Some cosmetic cleanups in the flashrom code and output.Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2873 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-16Add Gigabyte M61P-S3 SPI flash support to board_enable.cMichael van der Kolff
Signed-off-by: Michael van der Kolff <mvanderkolff@gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2864 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-16Convert the existing it8716f_* functions to generic_spi_* functions byCarl-Daniel Hailfinger
applying abstraction and wrapping. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2863 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-15Move SPI code out of board_enable.c where it started its life. The SPICarl-Daniel Hailfinger
chip finding and SPI chip accessor code is moved as well. This can be split later if we feel like it. The non-use of svn cp is intentional because the only history we'd have to preserve are a few commits which were early prototypes of chip identification code. For those who intend to look at that history, they can look at board_enable.c revision 2853. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2857 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-12Changes to flashrom to support the K8N-NEO3, first tested at Google on GSOC ↵Ronald G. Minnich
day :-) Also minor changes to remove tab-space combinations where possible. Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Signed-off-by: David Hendricks <david.hendricks@gmail.com> Acked-by: Stefan Reinauer <stepan@coresystems.de> Index: jedec.c =================================================================== --- jedec.c (revision 2847) +++ jedec.c (working copy) @@ -281,7 +281,7 @@ // dumb check if erase was successful. for (i = 0; i < total_size; i++) { if (bios[i] != (uint8_t) 0xff) { - printf("ERASE FAILED\n"); + printf("ERASE FAILED @%d, val %02x\n", i, bios[i]); return -1; } } Index: board_enable.c =================================================================== --- board_enable.c (revision 2847) +++ board_enable.c (working copy) @@ -153,7 +153,8 @@ return 1; } /* Start IO, 33MHz, readcnt input bytes, writecnt output bytes. Note: - We can't use writecnt directly, but have to use a strange encoding */ + * We can't use writecnt directly, but have to use a strange encoding + */ outb((0x5 << 4) | ((readcnt & 0x3) << 2) | (writeenc), port); do { busy = inb(port) & 0x80; @@ -202,43 +203,39 @@ /* * Helper functions for many Winbond Super I/Os of the W836xx range. */ -#define W836_INDEX 0x2E -#define W836_DATA 0x2F - /* Enter extended functions */ -static void w836xx_ext_enter(void) +static void w836xx_ext_enter(uint16_t port) { - outb(0x87, W836_INDEX); - outb(0x87, W836_INDEX); + outb(0x87, port); + outb(0x87, port); } /* Leave extended functions */ -static void w836xx_ext_leave(void) +static void w836xx_ext_leave(uint16_t port) { - outb(0xAA, W836_INDEX); + outb(0xAA, port); } /* General functions for reading/writing Winbond Super I/Os. */ -static unsigned char wbsio_read(unsigned char index) +static unsigned char wbsio_read(uint16_t index, uint8_t reg) { - outb(index, W836_INDEX); - return inb(W836_DATA); + outb(reg, index); + return inb(index+1); } -static void wbsio_write(unsigned char index, unsigned char data) +static void wbsio_write(uint16_t index, uint8_t reg, uint8_t data) { - outb(index, W836_INDEX); - outb(data, W836_DATA); + outb(reg, index); + outb(data, index+1); } -static void wbsio_mask(unsigned char index, unsigned char data, - unsigned char mask) +static void wbsio_mask(uint16_t index, uint8_t reg, uint8_t data, uint8_t mask) { - unsigned char tmp; + uint8_t tmp; - outb(index, W836_INDEX); - tmp = inb(W836_DATA) & ~mask; - outb(tmp | (data & mask), W836_DATA); + outb(reg, index); + tmp = inb(index+1) & ~mask; + outb(tmp | (data & mask), index+1); } /** @@ -248,37 +245,80 @@ * - Agami Aruma * - IWILL DK8-HTX */ -static int w83627hf_gpio24_raise(const char *name) +static int w83627hf_gpio24_raise(uint16_t index, const char *name) { - w836xx_ext_enter(); + w836xx_ext_enter(index); /* Is this the w83627hf? */ - if (wbsio_read(0x20) != 0x52) { /* SIO device ID register */ + if (wbsio_read(index, 0x20) != 0x52) { /* Super I/O device ID register */ fprintf(stderr, "\nERROR: %s: W83627HF: Wrong ID: 0x%02X.\n", - name, wbsio_read(0x20)); - w836xx_ext_leave(); + name, wbsio_read(index, 0x20)); + w836xx_ext_leave(index); return -1; } /* PIN89S: WDTO/GP24 multiplex -> GPIO24 */ - wbsio_mask(0x2B, 0x10, 0x10); + wbsio_mask(index, 0x2B, 0x10, 0x10); - wbsio_write(0x07, 0x08); /* Select logical device 8: GPIO port 2 */ + wbsio_write(index, 0x07, 0x08); /* Select logical device 8: GPIO port 2 */ - wbsio_mask(0x30, 0x01, 0x01); /* Activate logical device. */ + wbsio_mask(index, 0x30, 0x01, 0x01); /* Activate logical device. */ - wbsio_mask(0xF0, 0x00, 0x10); /* GPIO24 -> output */ + wbsio_mask(index, 0xF0, 0x00, 0x10); /* GPIO24 -> output */ - wbsio_mask(0xF2, 0x00, 0x10); /* Clear GPIO24 inversion */ + wbsio_mask(index, 0xF2, 0x00, 0x10); /* Clear GPIO24 inversion */ - wbsio_mask(0xF1, 0x10, 0x10); /* Raise GPIO24 */ + wbsio_mask(index, 0xF1, 0x10, 0x10); /* Raise GPIO24 */ - w836xx_ext_leave(); + w836xx_ext_leave(index); return 0; } +static int w83627hf_gpio24_raise_2e(const char *name) +{ + return w83627hf_gpio24_raise(0x2d, name); +} + /** + * Winbond W83627THF: GPIO 4, bit 4 + * + * Suited for: + * - MSI K8N-NEO3 + */ +static int w83627thf_gpio4_4_raise(uint16_t index, const char *name) +{ + w836xx_ext_enter(index); + /* Is this the w83627thf? */ + if (wbsio_read(index, 0x20) != 0x82) { /* Super I/O device ID register */ + fprintf(stderr, "\nERROR: %s: W83627THF: Wrong ID: 0x%02X.\n", + name, wbsio_read(index, 0x20)); + w836xx_ext_leave(index); + return -1; + } + + /* PINxxxxS: GPIO4/bit 4 multiplex -> GPIOXXX */ + + wbsio_write(index, 0x07, 0x09); /* Select logical device 9: GPIO port 4 */ + + wbsio_mask(index, 0x30, 0x02, 0x02); /* Activate logical device. */ + + wbsio_mask(index, 0xF4, 0x00, 0x10); /* GPIO4 bit 4 -> output */ + + wbsio_mask(index, 0xF6, 0x00, 0x10); /* Clear GPIO4 bit 4 inversion */ + + wbsio_mask(index, 0xF5, 0x10, 0x10); /* Raise GPIO4 bit 4 */ + + w836xx_ext_leave(index); + + return 0; +} + +static int w83627thf_gpio4_4_raise_4e(const char *name) +{ + return w83627thf_gpio4_4_raise(0x4E, name); +} +/** * Suited for VIAs EPIA M and MII, and maybe other CLE266 based EPIAs. * * We don't need to do this when using LinuxBIOS, GPIO15 is never lowered there. @@ -335,12 +375,12 @@ pci_write_byte(dev, 0x59, val); /* Raise ROM MEMW# line on Winbond w83697 SuperIO */ - w836xx_ext_enter(); + w836xx_ext_enter(0x2E); - if (!(wbsio_read(0x24) & 0x02)) /* flash rom enabled? */ - wbsio_mask(0x24, 0x08, 0x08); /* enable MEMW# */ + if (!(wbsio_read(0x2E, 0x24) & 0x02)) /* flash rom enabled? */ + wbsio_mask(0x2E, 0x24, 0x08, 0x08); /* enable MEMW# */ - w836xx_ext_leave(); + w836xx_ext_leave(0x2E); return 0; } @@ -487,9 +527,11 @@ {0x10de, 0x0360, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, "gigabyte", "m57sli", "GIGABYTE GA-M57SLI", it87xx_probe_serial_flash}, {0x1022, 0x7468, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, - "iwill", "dk8_htx", "IWILL DK8-HTX", w83627hf_gpio24_raise}, + "iwill", "dk8_htx", "IWILL DK8-HTX", w83627hf_gpio24_raise_2e}, + {0x10de, 0x005e, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, + "msi", "k8n-neo3", "MSI K8N Neo3", w83627thf_gpio4_4_raise_4e}, {0x1022, 0x746B, 0x1022, 0x36C0, 0x0000, 0x0000, 0x0000, 0x0000, - "AGAMI", "ARUMA", "agami Aruma", w83627hf_gpio24_raise}, + "AGAMI", "ARUMA", "agami Aruma", w83627hf_gpio24_raise_2e}, {0x1106, 0x3177, 0x1106, 0xAA01, 0x1106, 0x3123, 0x1106, 0xAA01, NULL, NULL, "VIA EPIA M/MII/...", board_via_epia_m}, {0x1106, 0x3177, 0x1043, 0x80A1, 0x1106, 0x3205, 0x1043, 0x8118, @@ -509,8 +551,8 @@ * Match boards on LinuxBIOS table gathered vendor and part name. * Require main PCI IDs to match too as extra safety. */ -static struct board_pciid_enable *board_match_linuxbios_name(char *vendor, - char *part) +static struct board_pciid_enable *board_match_linuxbios_name(char *vendor, + char *part) { struct board_pciid_enable *board = board_pciid_enables; @@ -525,10 +567,11 @@ continue; if (board->second_vendor && - !pci_dev_find(board->second_vendor, board->second_device)) + !pci_dev_find(board->second_vendor, board->second_device)) continue; return board; } + printf("NOT FOUND %s:%s\n", vendor, part); return NULL; } @@ -545,20 +588,20 @@ continue; if (!pci_card_find(board->first_vendor, board->first_device, - board->first_card_vendor, - board->first_card_device)) + board->first_card_vendor, + board->first_card_device)) continue; if (board->second_vendor) { if (board->second_card_vendor) { if (!pci_card_find(board->second_vendor, - board->second_device, - board->second_card_vendor, - board->second_card_device)) + board->second_device, + board->second_card_vendor, + board->second_card_device)) continue; } else { if (!pci_dev_find(board->second_vendor, - board->second_device)) + board->second_device)) continue; } } @@ -582,7 +625,7 @@ if (board) { printf("Found board \"%s\": Enabling flash write... ", - board->name); + board->name); ret = board->enable(board->name); if (ret) git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2850 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-02This patch aims to restructure SPI flash support in a more reasonableCarl-Daniel Hailfinger
way. It introduces a generic SPI host driver for the IT8716F Super I/O which will enable easy SPI programming without having to care for the peculiarities of the SPI host. To activate probing for the IT8716F, you have to use the gigabyte:m57sli mainboard override. SPI support will then use the gathered SPI host data to access the SPI flash. This has been tested sucessfully by Ward Vandewege <ward@gnu.org> on the GA-M57SLI v2.0, which has a MX25L4005 SPI flash part. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Ward Vandewege <ward@gnu.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2817 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-09-27Add preliminary SPI flash identification support for SPI chips attachedCarl-Daniel Hailfinger
to ITE IT8716F Super I/O. Right now this is hardcoded to the Gigabyte M57SLI board. It works only with rev 2.0 of the board, but it will bail out on earlier versions, so no damage can occur. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Ward Vandewege <ward@gnu.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2811 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-08-29Change all flashrom license headers to use our standard format.Uwe Hermann
No changes in content of the files. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2751 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-08-23Cosmetic fixes (trivial).Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2748 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-08-23Drop a bunch of useless header files, merge them into flash.h.Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2746 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-08-11flashrom: Add board enable for the EPoX EP-BX3.Luc Verhaegen
Signed-off-by: Luc Verhaegen <libv@skynet.be> Acked-by: Peter Stuge <peter@stuge.se> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2743 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-07-04Flashrom: Add support for Tyan Tomcat K7M.Luc Verhaegen
Same board enable as Asus A7V8-MX. Tested by Reinhard Max. Signed-off-by: Luc Verhaegen <libv@skynet.be> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2732 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-06-05flashrom: Document the newly supported IBM x3455 board and theUwe Hermann
now-supported Broadcom HT-1000 chipset (trivial). Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2713 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-06-05Move GPIO settings to board specific code for IBM x3455Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2712 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-05-20Flashrom: add support for ASUS P5A (Socket 7, ALi based).Luc Verhaegen
* Add support for the ALi M1533 to chipset_enable.c * Add some SMBus poking needed for the ASUS P5A, to board_enable.c Since PCI subsystem IDs are worthless with this board, people will have to name the board directly. Signed-off-by: Luc Verhaegen <libv@skynet.be> Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2677 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-05-09Fix coding style of flashrom by running indent on all files:Uwe Hermann
indent -npro -kr -i8 -ts8 -sob -l80 -ss -ncs *.[ch] Some minor fixups were required, and maybe a few more cosmetic changeѕ are needed. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2643 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-05-04Add WinBond Super IO helpers.Luc Verhaegen
* These helpers severely clear up winbond superio usage. * Removed board_iwill_dk8_htx as it can be replaced by board_agami_aruma (Mondrian Nuessle). * Renamed board_agami_aruma to w83627hf_gpio24_raise. * Clarified comments in w83627hf_gpio24_raise, and added some things from the old iwill code. * Moved all board functions name argument to const. (warning breaks build) * Moved iwill entry in board_pciid_enables. Signed-off-by: Luc Verhaegen <libv@skynet.be> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2627 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-05-03Enable flashing on the IWILL DK8-HTX board by configuring the Super I/OMondrian Nuessle
to set the right GPIO pins, so write protection is disabled. Signed-off-by: Mondrian Nuessle <nuessle@uni-mannheim.de> Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2624 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-04-04flashrom: split flash_enable.c into chipset_enable.c and board_enable.cLuc Verhaegen
This splits up the ROM Write enable code into chipset specific and board specific parts. This of course means that a lot of code is plainly moved about. * Allows for linuxbios name matching and pci-subsystem id matching. The latter uses a double set to properly distuinguish boards despite of some known vendors being lax about it. * Fixes GPIO15 being raised on every VT8235 southbridge, regardless of what that line actually controls; rom on EPIA-M, backlight on mitac 8999 laptop. * Adds flashrom support for Asus A7V400-MX (KM400 + VT8235) * Island aruma was renamed agami aruma, the board specific code now got adjusted. A set of pci-ids was retrieved from source code. Signed-off-by: Luc Verhaegen <libv@skynet.be> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2581 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-17 14:02:53 +0000