| Age | Commit message (Collapse) | Author |
|---|
|
I had a stupid. :( Asterisks have a special meaning in regexes, but I
just wanted to match three literal ones. This kills the regex parser.
Change-Id: Ia6149e72715d651c914583ed3235680ce5b7a2e0
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/20171
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
|
|
The 'cbmem -1' flag that cuts off console output before the last boot
will ignore content from earlier stages if it was truncated due to lack
of pre-CBMEM console space. This patch makes the "log truncated" message
more specific and adds it as an additional cut-off marker to 'cbmem -1'
to counteract that problem.
Also raise the log level of the coreboot banner one step to BIOS_NOTICE
to make it more likely to be included in the output for 'cbmem -1' to
find. (I believe NOTICE is reasonable but I wouldn't want to go as far
as WARN which should be reserved for actual problems. Of course this is
not ideal, but then again, our whole log-level system really isn't... it
would be better if we could make it always print a banner to the CBMEM
console without affecting the UART at the same time, but that would
require a larger amount of work.)
Change-Id: I58288593dfa757e14f4a9da4ffa7e27b0b66feb9
Reported-by: https://ticket.coreboot.org/issues/117
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/19720
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
There is code to adjust the mapping down if a mmap fails
at a physical address. However, if the address is less
than the page size of the system then the physical offset will
underflow. This can actually cause a kernel panic on when
operating on /dev/mem.
The failing condition happens when the requested mapping at 0
fails in the kernel. The fallback path is taken and page size
is subtracted from 0 making a very large offset. The PAT code
in the kernel fails with a BUG_ON in reserve_memtype() checking
start >= end. The kernel needs to be fixed as well, but this
fallback path is wrong as well.
BUG=b:38211793
Change-Id: I32b0c15b2f1aa43fc57656d5d2d5f0e4e90e94ef
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/19679
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Even though the persistent CBMEM console is obviously awesome, there may
be cases where we only want to look at console output from the last boot.
It's easy to tell where one boot ends and another begins from the banner
message that coreboot prints at the start of every stage, but in order
to make it easier to find that point (especially for external tools),
let's put that functionality straight into the cbmem utility with a new
command line flag. Use the POSIX/libc regular expression API to find the
banner string for maximum compatilibity, even though it's kinda icky.
Change-Id: Ic17383507a884d84de9a2a880380cb15b25708a1
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/19497
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
This patch allows the CBMEM console to persist across reboots, which
should greatly help post factum debugging of issues involving multiple
reboots. In order to prevent the console from filling up, it will
instead operate as a ring buffer that continues to evict the oldest
lines once full. (This means that if even a single boot doesn't fit into
the buffer, we will now drop the oldest lines whereas previous code
would've dropped the newest lines instead.)
The console control structure is modified in a sorta
backwards-compatible way, so that new readers can continue to work with
old console buffers and vice versa. When an old reader reads a new
buffer that has already once overflowed (i.e. is operating in true ring
buffer mode) it will print lines out of order, but it will at least
still print out the whole console content and not do any illegal memory
accesses (assuming it correctly implemented cursor overflow as it was
already possible before this patch).
BUG=chromium:651966
TEST=Rebooted and confirmed output repeatedly on a Kevin and a Falco.
Also confirmed correct behavior across suspend/resume for the latter.
Change-Id: Ifcbf59d58e1ad20995b98d111c4647281fbb45ff
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/18301
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
On some architectures (like AArch64), /dev/mem mappings outside of the
area marked as normal RAM use a memory type that does not support
unaligned accesses. The libc memcpy() implementation on these
architectures may not know or expect that and make an unaligned access
for certain source/dest/length alignments. Add a custom memcpy()
implementation that takes these restrictions into account and use it
anywhere we copy straight out of /dev/mem memory.
Change-Id: I03eece380a14a69d4be3805ed72fba640f6f7d9c
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/18300
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
cbmem --help should not return an error to the OS.
Change-Id: Id00091c679dbb109bc352cf8a81d67c2ae5666ec
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/16574
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
There can be cases where "found" wasn't initialized, do so.
Change-Id: Ifef8d61daa70e27ec39b7a8f3481d2316dfaa36e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Found-by: Coverity Scan #1347334
Reviewed-on: https://review.coreboot.org/15969
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This removes the newlines from all files found by the new
int-015-final-newlines script.
Change-Id: I65b6d5b403fe3fa30b7ac11958cc0f9880704ed7
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/15975
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Split the additional time stamps concerning depthcharge from
the cbmem utility sourcecode and move them into
commonlib/timestamp_serialized.h header.
Change-Id: Ic23c3bc12eac246336b2ba7c7c39eb2673897d5a
Signed-off-by: Antonello Dettori <dev@dettori.io>
Reviewed-on: https://review.coreboot.org/15725
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Commit c49014e (timestamp: add tick frequency to exported table)
refactors the code, but forgets to correctly scale the frequency to
megahertz, where the value is read from sysfs, so that printing time
stamp information shows milliseconds instead of microseconds, as can be
seen on the output `cbmem -t` for the ASRock E350M1 below.
```
0:1st timestamp 515
10:start of ramstage 515 (0)
30:device enumeration 515 (0)
40:device configuration 610 (94)
50:device enable 614 (4)
60:device initialization 624 (9)
70:device setup done 639 (14)
75:cbmem post 844 (205)
80:write tables 844 (0)
90:load payload 849 (4)
15:starting LZMA decompress (ignore for x86) 849 (0)
16:finished LZMA decompress (ignore for x86) 869 (20)
99:selfboot jump 869 (0)
Total Time: 350
```
So scale the return value correctly to megahertz, by dividing it with
1000.
```
0:1st timestamp 515,655
10:start of ramstage 515,655 (0)
30:device enumeration 515,663 (7)
40:device configuration 610,620 (94,957)
50:device enable 614,680 (4,059)
60:device initialization 624,618 (9,938)
70:device setup done 639,553 (14,934)
75:cbmem post 844,707 (205,154)
80:write tables 844,710 (2)
90:load payload 849,532 (4,821)
15:starting LZMA decompress (ignore for x86) 849,655 (123)
16:finished LZMA decompress (ignore for x86) 869,903 (20,247)
99:selfboot jump 869,922 (19)
Total Time: 354,261
```
Change-Id: Iea032c62487c7946b6194a90268755034c6350df
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://review.coreboot.org/14086
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
|
|
This patch ports the LZ4 decompression code that debuted in libpayload
last year to coreboot for use in CBFS stages (upgrading the base
algorithm to LZ4's dev branch to access the new in-place decompression
checks). This is especially useful for pre-RAM stages in constrained
SRAM-based systems, which previously could not be compressed due to
the size requirements of the LZMA scratchpad and bounce buffer. The
LZ4 algorithm offers a very lean decompressor function and in-place
decompression support to achieve roughly the same boot speed gains
(trading compression ratio for decompression time) with nearly no
memory overhead.
For now we only activate it for the stages that had previously not been
compressed at all on non-XIP (read: non-x86) boards. In the future we
may also consider replacing LZMA completely for certain boards, since
which algorithm wins out on boot speed depends on board-specific
parameters (architecture, processor speed, SPI transfer rate, etc.).
BRANCH=None
BUG=None
TEST=Built and booted Oak, Jerry, Nyan and Falco. Measured boot time on
Oak to be about ~20ms faster (cutting load times for affected stages
almost in half).
Change-Id: Iec256c0e6d585d1b69985461939884a54e3ab900
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13638
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This patch adds strings for the timestamp changes and additions in the
Chrome OS bootloader (depthcharge). See http://crosreview.com/323783
for details and justification.
BRANCH=none
BUG=None
TEST=Booted Oak, confirmed that cbmem output includes new timestamps.
Change-Id: I9ad68edca660f4e4286e680316b4e14f1259d1bc
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c1b1f6d669f62217ed701cd3561b9d14973d890a
Original-Change-Id: I7256ca62c69f2ab7279fd2656fbbfa610e04fc44
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/323871
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13576
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch adds three timestamps to coreboot and the cbmem utility that
track the time required to read in the Chrome OS Vital Product Data
(VPD) blocks (RO and RW). It's useful to account for these like all
other large flash accesses, since their size is variable.
BRANCH=None
BUG=None
TEST=Booted Oak, found my weird 100ms gap at the start of ramstage
properly accounted for.
Change-Id: I2024ed4f7d5e5ae81df9ab5293547cb5a10ff5e0
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b97288b5ac67ada56e2ee7b181b28341d54b7234
Original-Change-Id: Ie69c1a4ddb6bd3f1094b3880201d53f1b5373aef
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/322831
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: https://review.coreboot.org/13139
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The license text that we decided to remove was removed from the headers
of these files, but was still left in the help text. Remove it from
those locations as well.
Change-Id: I0e1b3b79f1afa35e632c4a4dd09a8bf2b02eaa6d
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12913
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: Ib20481e43e6ca5b56c630cdc0eb7b1b01311cbb6
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
Reviewed-on: https://review.coreboot.org/12404
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Changed following things,
(1) cbmem -l would give both ID and Name for coreboot table along with
START and LENGTH of each entry
e.g.
localhost ~ # cbmem -l
CBMEM table of contents:
NAME ID START LENGTH
<.....>
3. TIME STAMP 54494d45 77ddd000 000002e0
4. MRC DATA 4d524344 77ddb000 00001880
5. ROMSTG STCK 90357ac4 77dd6000 00005000
6. VBOOT WORK 78007343 77dd2000 00004000
7. VBOOT 780074f0 77dd1000 00000c3c
8. RAMSTAGE 9a357a9e 77d13000 000be000
9. REFCODE 04efc0de 77c01000 00112000
10. ACPI GNVS 474e5653 77c00000 00001000
11. SMM BACKUP 07e9acee 77bf0000 00010000
<..etc..>
(2) With this patch, new command line arg "rawdump" or "-r" will be
added to cbmem
user can grab the ID with "cbmem -l" and execute "cbmem -r <ID>" to get
raw dump of cbtable for the <ID> in interest.
This change is needed to get MMA results data from cbtable. Coreboot
stores the MMA results in cbmem. Separate post processing scripts uses
cbmem utility to get the these data.
This feature in the cbmem tool can also help debugging some issues where
some specific ID of cbtable needs examination.
BRANCH=none
BUG=chrome-os-partner:43731
TEST=Build and Boot kunimitsu (FAB3). Cbmem -r and -l works as described.
Not tested on Glados
CQ-DEPEND=CL:299476,CL:299475,CL:299473,CL:299509,CL:299508,CL:299507,CL:*230478,CL:*230479
Change-Id: I70ba148113b4e918646b99997a9074300a9c7876
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f60c79d845d4d4afca480b6884c564a0d5e5caf8
Original-Change-Id: I1dde50856f0aa8d4cdd3ecf013bd58d37d76eb72
Original-Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com>
Original-Signed-off-by: Icarus Sparry <icarus.w.sparry@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/299474
Original-Commit-Ready: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Original-Tested-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: http://review.coreboot.org/12482
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Building cbmem with ASan
$ CC=gcc-5 CFLAGS="-O1 -g -fsanitize=address -fno-omit-frame-pointer" LDFLAGS="-fsanitize=address" make
it sometimes finds a heap-buffer-overflow, while dumping the CBMEM
console.
$ sudo ./cbmem -c
=================================================================
==11208==ERROR: AddressSanitizer: heap-buffer-overflow on address 0xb5d5782b at pc 0x0804a4d7 bp 0xbfe23bc8 sp 0xbfe23bbc
WRITE of size 1 at 0xb5d5782b thread T0
#0 0x804a4d6 in dump_console /home/joey/src/coreboot/util/cbmem/cbmem.c:553
#1 0x804a4d6 in main /home/joey/src/coreboot/util/cbmem/cbmem.c:1134
#2 0xb70a3a62 in __libc_start_main (/lib/i386-linux-gnu/i686/cmov/libc.so.6+0x19a62)
#3 0x8048cf0 (/home/joey/src/coreboot/util/cbmem/cbmem+0x8048cf0)
0xb5d5782b is located 50 bytes to the right of 131065-byte region [0xb5d37800,0xb5d577f9)
allocated by thread T0 here:
#0 0xb72c64ce in __interceptor_malloc (/usr/lib/i386-linux-gnu/libasan.so.2+0x924ce)
#1 0x804a407 in dump_console /home/joey/src/coreboot/util/cbmem/cbmem.c:542
#2 0x804a407 in main /home/joey/src/coreboot/util/cbmem/cbmem.c:1134
#3 0xb70a3a62 in __libc_start_main (/lib/i386-linux-gnu/i686/cmov/libc.so.6+0x19a62)
SUMMARY: AddressSanitizer: heap-buffer-overflow /home/joey/src/coreboot/util/cbmem/cbmem.c:553 dump_console
Shadow bytes around the buggy address:
0x36baaeb0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x36baaec0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x36baaed0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x36baaee0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x36baaef0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01
=>0x36baaf00: fa fa fa fa fa[fa]fa fa fa fa fa fa fa fa fa fa
0x36baaf10: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x36baaf20: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x36baaf30: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x36baaf40: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x36baaf50: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
Shadow byte legend (one shadow byte represents 8 application bytes):
Addressable: 00
Partially addressable: 01 02 03 04 05 06 07
Heap left redzone: fa
Heap right redzone: fb
Freed heap region: fd
Stack left redzone: f1
Stack mid redzone: f2
Stack right redzone: f3
Stack partial redzone: f4
Stack after return: f5
Stack use after scope: f8
Global redzone: f9
Global init order: f6
Poisoned by user: f7
Container overflow: fc
Array cookie: ac
Intra object redzone: bb
ASan internal: fe
==11208==ABORTING
Fix up commit 06b13a37 (cbmem: Terminate the cbmem console at the cursor
position.) by reverting setting the cursor to 0.
Change-Id: Id614a8e0f1a202671dd091f825d826a17176bfcc
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/10572
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The cbmem utility shouldn't be using the intra coreboot
data structures for obtaining the produced data/information.
Instead use the newly added cbmem records in the coreboot
tables for pulling out the data one wants by using the
generic indexing of coreboot table entries.
BUG=chrome-os-partner:43731
BRANCH=None
TEST=Interrogated cbmem table of contents with updated code.
Change-Id: I51bca7d34baf3b3a856cd5e585c8d5e3d8af1d1c
Reviewed-on: http://review.coreboot.org/11758
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
It encourages users from writing to the FSF without giving an address.
Linux also prefers to drop that and their checkpatch.pl (that we
imported) looks out for that.
This is the result of util/scripts/no-fsf-addresses.sh with no further
editing.
Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11888
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
This timestamp marks that EC verification has completed.
BUG=chromium:537269
TEST=Run cbmem on glados, verify "1030:finished EC verification" is
seen.
BRANCH=None
Change-Id: I0114febae689584ec8b12c169e70f2d3995d8d4d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: deeb2ab8085e5ea0a180633eb8fb1c86aadffe94
Original-Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Original-Change-Id: I4f09e970ffedc967c82e6283973cbbcb2fbe037f
Original-Reviewed-on: https://chromium-review.googlesource.com/309280
Original-Commit-Ready: Shawn N <shawnn@chromium.org>
Original-Tested-by: Shawn N <shawnn@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/12230
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Tested-by: build bot (Jenkins)
|
|
- Have clean remove junit.xml files.
- Remove junit.xml target from cbmem makefile - this is in the top
level Makefile.inc now.
- add distclean targets to makefiles.
- Make sure all makefiles have .PHONY set up.
- rm commands need -f or they will fail if the file they're trying
to remove doesn't exist, causing the build to fail.
Change-Id: I2f0635f2c0a9417e3377a90c8d67103323c4a72f
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/12120
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: Icd28af388c49ad36d7a8e414b3c82e18e1f8f523
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/11932
Tested-by: build bot (Jenkins)
Reviewed-by: Peter Stuge <peter@stuge.se>
|
|
Instead of reaching into src/include and re-writing code
allow for cleaner code sharing within coreboot and its
utilities. The additional thing needed at this point is
for the utilities to provide a printk() declaration within
a <console/console.h> file. That way code which uses printk()
can than be mapped properly to verbosity of utility parameters.
Change-Id: I9e46a279569733336bc0a018aed96bc924c07cdd
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11592
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
In order to make analysis easier provide an option (-T) to
print timestamps in a parseable format:
ID<tab>raw timestamp<tab>time from previous entry<tab>description
BUG=chrome-os-partner:44669
BRANCH=firmware-strago-7287.B
TEST=Built and tested on glados. Used the following script:
cbmem -T | awk 'BEGIN { FS="\t" } { tot += $3 } END { print tot }'
Change-Id: I06dc0487d1462b6a78924130f0ad74b0d787d3f8
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11471
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Add the timestamp tick frequency within the timestamp table so
the cbmem utility doesn't try to figure it out on its own. Those
paths still exist for x86 systems which don't provide tsc_freq_mhz().
All other non-x86 systems use the monotonic timer which has a 1us
granularity or 1MHz.
One of the main reasons is that Linux is reporting
/sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq as the true
turbo frequency on turbo enables machines. This change also fixes
the p-state values honored in cpufreq for turbo machines in that
turbo p-pstates were reported as 100MHz greater than nominal.
BUG=chrome-os-partner:44669
BRANCH=firmware-strago-7287.B
TEST=Built and booted on glados. Confirmed table frequency honored.
Change-Id: I763fe2d9a7b01d0ef5556e5abff36032062f5801
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11470
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Display the total accumulated time using each timestamp
entry. It purposefully doesn't take into account the first
timestamp because that can be a platform dependent value
that may not contribute to the concept of "total".
BUG=None
BRANCH=None
TEST=Ran cbmem on glados where TSC doesn't reset to 0 on
reboots. Clear total value given at end.
Original-Change-Id: Idddb8b88d3aaad11d72c58b18e8fd9fd1447a30e
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/291480
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-Trybot-Ready: David James <davidjames@chromium.org>
Change-Id: I79a0954d3b738323aaebb3e05171bcf639e5d977
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11202
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
It's helpful to know the base_time (1st timestamp) in the
timestamp table because it provides more information like
the accumulated time before the first timestamp was recorded.
In order to maximize this information report the base time
as an entry that is printed. It's called '1st timestamp'.
The implementation turns all the timestamp entries into absolute
times so one can observe both absolute and relative time for
each marker.
Change-Id: I1334a2d980e3bcc2968a3bd6493c68b9efcca7ae
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10883
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I16bfe42a00d73209307655601edaa3a8ffc9c902
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/10905
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The cbmem util needs the CBMEM_IDs and the strings for
reporting and shares the cbmem.h file with coreboot. Split out
the IDs so for a simpler sharing and no worries about overlap of
standard libraries and other things in the header that coreboot
requires, but the tool does not.
Change-Id: Iba760c5f99c5e9838ba9426e284b59f02bcc507a
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/10430
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
As per discussion with lawyers[tm], it's not a good idea to
shorten the license header too much - not for legal reasons
but because there are tools that look for them, and giving
them a standard pattern simplifies things.
However, we got confirmation that we don't have to update
every file ever added to coreboot whenever the FSF gets a
new lease, but can drop the address instead.
util/kconfig is excluded because that's imported code that
we may want to synchronize every now and then.
$ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, *MA[, ]*02110-1301[, ]*USA:Foundation, Inc.:" {} +
$ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA:Foundation, Inc.:" {} +
$ find * -type f -exec sed -i "s:Foundation, Inc., 59 Temple Place[-, ]*Suite 330, Boston, MA *02111-1307[, ]*USA:Foundation, Inc.:" {} +
$ find * -type f -exec sed -i "s:Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.:Foundation, Inc.:" {} +
$ find * -type f
-a \! -name \*.patch \
-a \! -name \*_shipped \
-a \! -name LICENSE_GPL \
-a \! -name LGPL.txt \
-a \! -name COPYING \
-a \! -name DISCLAIMER \
-exec sed -i "/Foundation, Inc./ N;s:Foundation, Inc.* USA\.* *:Foundation, Inc. :;s:Foundation, Inc. $:Foundation, Inc.:" {} +
Change-Id: Icc968a5a5f3a5df8d32b940f9cdb35350654bef9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/9233
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
|
|
This resolves the cbmem table of contents access failure introduced
in commit 0dff57dd.
Change-Id: Ie143ae11d97f26bd17fe10e1382fae9e5ad1a60e
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/10236
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add additional FSP timestamp values to cbmem.h and specify values for
the existing ones. Update cbmem.c with the FSP timestamp values and
descriptions.
BRANCH=none
BUG=None
TEST=Build for Braswell and Skylake boards using FSP 1.1.
Change-Id: I835bb090ff5877a108e48cb60f8e80260773771b
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: http://review.coreboot.org/10025
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
By design, the imd library still provdes dynamic growth so that
feature is consistent. The imd-based cbmem packs small allocations
into a larger entry using a tiered imd. The following examples show
the reduced fragmentation and reduced memory usage.
Before with dynamic cbmem:
CBMEM ROOT 0. 023ff000 00001000
aaaabbbb 1. 023fe000 00001000
aaaabbbc 2. 023fd000 00001000
aaaabbbe 3. 023fc000 00001000
aaaacccc 4. 023fa000 00002000
aaaacccd 5. 023f9000 00001000
ROMSTAGE 6. 023f8000 00001000
CONSOLE 7. 023d8000 00020000
COREBOOT 8. 023d6000 00002000
After with tiered imd:
IMD ROOT 0. 023ff000 00001000
IMD SMALL 1. 023fe000 00001000
aaaacccc 2. 023fc000 00001060
aaaacccd 3. 023fb000 000007cf
CONSOLE 4. 023db000 00020000
COREBOOT 5. 023d9000 00002000
IMD small region:
IMD ROOT 0. 023fec00 00000400
aaaabbbb 1. 023febe0 00000020
aaaabbbc 2. 023feba0 00000040
aaaabbbe 3. 023feb20 00000080
ROMSTAGE 4. 023feb00 00000004
Side note: this CL provides a basis for what hoops one needs to
jump through when there are not writeable global variables on
a particular platform in the early stages.
Change-Id: If770246caa64b274819e45a26e100b62b9f8d2db
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9169
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
Now that we have timestamps in pre-RAM stages, let's actually make use
of them. This patch adds several timestamps to both the bootblock and
especially the verstage to allow more fine-grained boot time tracking.
Some of the introduced timestamps can appear more than once per boot.
This doesn't seem to be a problem for both coreboot and the cbmem
utility, and the context makes it clear which operation was timestamped
at what point.
Also simplifies cbmem's timestamp printing routine a bit, fixing a
display bug when a timestamp had a section of exactly ",000," in it
(e.g. 1,000,185).
BRANCH=None
BUG=None
TEST=Booted Pinky, Blaze and Falco, confirmed that all timestamps show
up and contained sane values. Booted Storm (no timestamps here since it
doesn't support pre-RAM timestamps yet).
Change-Id: I7f4d6aba3ebe3db0d003c7bcb2954431b74961b3
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 7a2ce81722aba85beefcc6c81f9908422b8da8fa
Original-Change-Id: I5979bfa9445a9e0aba98ffdf8006c21096743456
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/234063
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9608
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BUG=chrome-os-partner:32973
BRANCH=None
TEST=cbmem -t to check proper timestamps on ryu
Change-Id: Ic31c5d9f3e397d90b08fe1c5e152148f4a278b95
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 92469e04c1c52bd60a8a37f017d865d0a838bff5
Original-Change-Id: I95419a6d240c168c8b6a489cac969390ecf6dea0
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/223345
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9340
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The default mapping size is 1MiB of ram. However, not
all systems allow 1MiB of memory to mapped depending on
the kernel's memory map. Therefore, be explicit about
the sizes to mmap().
The only path that wasn't cleaned up was the coverage path
as that needs to handle dynamic cbmem. The correct way to
fix that is to add a global like the timestamps that is set
while parsing cbtable.
BUG=chrome-os-partner:31355
BRANCH=None
TEST=Can cbmem -ltc on ryu.
Change-Id: I548afa5ddbe0a859f52bc2ab2d0931186ee378a5
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: df4991ce1da7f0c25e99d84222cbc8d3189d0d66
Original-Change-Id: I27b70ae8a8fba168d1c1829bbef0135c7b651eac
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/221971
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8829
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch brings the cbmem utility in line with the recent change to
coreboot's device tree binding. Since trying to find the right node to
place this binding has been so hard (and still isn't quite agreed upon),
and because it's really the more correct thing to do, this code searches
through the device tree for the 'coreboot' compatible property instead
of looking up a hardcoded path. It also provides bullet-proof
'#address-cells' handling that should work for any endianness and size.
BUG=chrome-os-partner:29311
TEST=Ran cbmem -c and cbmem -t on Nyan_Big. Also straced the to make
sure everything looks as expected. 'time cbmem -t' = ~35ms shows that
there is no serious performance problem from the more thorough lookup
code.
Original-Change-Id: I806a21270ba6cec6e81232075749016eaf18508b
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/204274
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
(cherry picked from commit 3e64e28f684e60e8b300906c1abffee75ec6a5c2)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I0a0a4f69330d3d8c5c3ea92b55f5dde4d43fca65
Reviewed-on: http://review.coreboot.org/8141
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
CBMEM IDs are converted to symbolic names by both target and host
code. Keep the conversion table in one place to avoid getting out of
sync.
BUG=none
TEST=manual
. the new firmware still displays proper CBMEM table entry descriptions:
coreboot table: 276 bytes.
CBMEM ROOT 0. 5ffff000 00001000
COREBOOT 1. 5fffd000 00002000
. running make in util/cbmem still succeeds
Original-Change-Id: I0bd9d288f9e6432b531cea2ae011a6935a228c7a
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/199791
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 5217446a536bb1ba874e162c6e2e16643caa592a)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I0d839316e9697bd3afa0b60490a840d39902dfb3
Reviewed-on: http://review.coreboot.org/7938
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Commit b4b9eb39 (x86: provide infrastructure to backup default SMM
region) introduced the new CBMEM type `CBMEM_ID_SMM_SAVE_SPACE`, but
did not add its name `SMM BACKUP` to the utility `cbmem`, causing the
following output, when running `cbmem` on a system making
use of `BACKUP_DEFAULT_SMM_REGION`.
7. 07e9acee 7f7e5000 00010000
Fix that by adding the name `SMM BACKUP` to the struct
`cbmem_id_to_name`.
Change-Id: Ib24088c07af4daf6b7d8d5854283b5faa2ad6503
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/7176
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Since commit c0199078 (cbmem utility: Find actual CBMEM area) [1], at least on
the Lenovo X201, X230 and X60, printing the CBMEM table of contents did
not work. It still worked on the ASRock E350M1 though.
$ sudo /src/coreboot/util/cbmem/cbmem -l --verbose # Lenovo X60t
Looking for coreboot table at 0
Mapping 1MB of physical memory at 0x0.
Found!
coreboot table entry 0x11
Found forwarding entry.
Unmapping 1MB of virtual memory at 0xb74dc000.
Looking for coreboot table at 7f6c4000
Mapping 1MB of physical memory at 0x7f6c4000.
Found!
coreboot table entry 0xc8
coreboot table entry 0x01
Found memory map.
coreboot table entry 0x03
coreboot table entry 0x04
coreboot table entry 0x05
coreboot table entry 0x06
coreboot table entry 0x07
coreboot table entry 0x08
coreboot table entry 0x09
coreboot table entry 0x0a
coreboot table entry 0x16
Found timestamp table.
cbmem_addr = 7f7dd000
coreboot table entry 0x17
Found cbmem console.
cbmem_addr = 7f7de000
Unmapping 1MB of virtual memory at 0xb74dc000.
No coreboot CBMEM area found!
The address of the boot info record has to be used for checking, that reading
takes place in the bounds of the boot info record.
$ sudo ~/src/coreboot/util/cbmem/cbmem -l # Lenovo X60
CBMEM table of contents:
ID START LENGTH
[…]
Big thanks to David and Stefan for their help.
[1] http://review.coreboot.org/2117
Change-Id: I1eb09a6445d9ea17e1e16b6866dece74315d3c73
Found-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/7093
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Originally the utility cbmem was just used for reading out the time
stamps and was later extented. The removed comment is currently at the
wrong place and `cbmem` does much more now, so that the comment is just
removed.
Change-Id: Ief1d7aef38a4b439e3e224e6e6c65f7aa57f821f
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/7091
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
|
|
If the cbmem console buffer isn't zero filled before it's used, there won't be
a terminator at the end. We need to put one at the cursor position manually.
Change-Id: I69870c2b24b67ce3cbcd402b62f3574acb4c2a8f
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://gerrit.chromium.org/gerrit/65300
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 8ec61e52a6a27ed518d0abb5a19d6261edf9dab1)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6404
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Our include files reference CONFIG_xxx declarations, which we should
ignore for utility build.
We cannot include kconfig.h to get IS_ENABLED() as that file
would require build/config.h and we do not want to enforce a build
of the firmware to be able to build the utility.
Since we do not include build/config.h each occurence of CONFIG_xxx
in the included header files is undefined and will be treated as
disabled.
Change-Id: I74f1627fc3f294410db8ce486ab553dac9e967f4
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/6066
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
In some cases the cbmem console can be larger than the default
mapping size of 1MiB. Therefore, add the ability to do a mapping
that is larger than the default mapping using map_memory_size().
The console printing code will unconditionally map the console based
on the size it finds in the cbmem entry.
Change-Id: I016420576b9523ce81195160ae86ad16952b761c
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5440
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
The rule has the target `junit.xml` and runs `make clean` and `make` and
logs the result in the file `junit.xml` suitable for consumption by
Jenkins.
Change-Id: I42a31f6c7a45fa9c3773969d78f745fcc4e09dbd
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/4611
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
The numbers alone are hard to parse, so add
some timestamp names to make it easier to read.
Change-Id: Ie32d3e7ca759bd15e7c160bdd829dec19943e6cb
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: https://gerrit.chromium.org/gerrit/65333
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: Ronald G. Minnich <rminnich@chromium.org>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Commit-Queue: Stefan Reinauer <reinauer@chromium.org>
Reviewed-on: http://review.coreboot.org/4314
Tested-by: build bot (Jenkins)
|
|
On ARM the timestamps are already in micro seconds, so
no need to convert them.
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Change-Id: If7363b0703e144bde62d9dab4ba845e1ace5bd18
Reviewed-on: https://gerrit.chromium.org/gerrit/63991
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Commit-Queue: Stefan Reinauer <reinauer@chromium.org>
Tested-by: Stefan Reinauer <reinauer@chromium.org>
Reviewed-on: http://review.coreboot.org/4313
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
This also adds an option -x/--hexdump to dump the whole
CBMEM area for debugging.
Change-Id: I244955394c6a2199acf7af78ae4b8b0a6f3bfe33
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: https://gerrit.chromium.org/gerrit/62287
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Commit-Queue: Stefan Reinauer <reinauer@chromium.org>
Tested-by: Stefan Reinauer <reinauer@chromium.org>
Reviewed-on: http://review.coreboot.org/4312
Tested-by: build bot (Jenkins)
|
|
on ARM the CBMEM utility requires the procfs entry
/proc/device-tree/firmware/coreboot/coreboot-table
provided by the FDT (dynamically created by depthcharge
at the moment)
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Change-Id: If5f961afb23791af6f32dd4fc9a837a1aa41b70e
Reviewed-on: https://gerrit.chromium.org/gerrit/59322
Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Tested-by: Stefan Reinauer <reinauer@chromium.org>
Commit-Queue: Stefan Reinauer <reinauer@chromium.org>
Reviewed-on: http://review.coreboot.org/4311
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Commit b8ad224 changed the memory address in lb_cbmem_ref coreboot
table entries from a pointer to a uint64_t. This change was introduced
to make the cbmem utility work on both 32bit and 64bit userland.
Unfortunately, this broke the cbmem utility running on older versions
of coreboot because they were still providing a 32bit only field for
the address while the cbmem utility would now take the following 4
bytes as upper 32bits of a pointer that can obviously not be
mmapped. This change checks if the size of the lb_cbmem_ref structure
provided by coreboot is smaller than expected, and if so, ignore the
upper 32bit of the address read.
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Change-Id: If4c8e9b72b2a38c961c11d7071b728e61e5f1d18
Commit-Queue: Stefan Reinauer <reinauer@google.com>
Tested-by: Stefan Reinauer <reinauer@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4139
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
The .dependencies rule did not use the CPPFLAGS variable which led
to funny behavior: a spurious termination message the first time
(after checkout/make distclean) one executes make. Afterwards the
(wrongly) empty .dependencies file hides the problem and the binary
is created anyway.
$ make
cbmem.c:37:34: fatal error: boot/coreboot_tables.h: No such file or directory
compilation terminated.
cc -O2 -Wall -Werror -iquote ../../src/include -iquote ../../src/src/arch/x86 -c -o cbmem.o cbmem.c
cc cbmem.o -o cbmem
$ make
make: Nothing to be done for `all'.
$ make clean
rm -f cbmem *.o *~
$ make
cc -O2 -Wall -Werror -iquote ../../src/include -iquote ../../src/src/arch/x86 -c -o cbmem.o cbmem.c
cc cbmem.o -o cbmem
$ make distclean
rm -f cbmem *.o *~
rm -f .dependencies
$ make
cbmem.c:37:34: fatal error: boot/coreboot_tables.h: No such file or directory
compilation terminated.
cc -O2 -Wall -Werror -iquote ../../src/include -iquote ../../src/src/arch/x86 -c -o cbmem.o cbmem.c
cc cbmem.o -o cbmem
I fixed that by adding the CPPFLAGS variable to the .dependencies recipe, just
like Stefan Reinauer did in Chromium (Ia9d2e10a3ef122f30d681d16c2291eb108ead835),
hence the split sign-off for this tiny change. :)
Change-Id: Icd11b146ad762cbdf9774630b950f70e1253a072
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at>
Reviewed-on: http://review.coreboot.org/3548
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.huber@secunet.com>
|
|
Use PRIx64 to print a u64 instead of "llx". Fixes the following error:
cbmem.c: In function 'parse_cbtable':
cbmem.c:135:2: error: format '%llx' expects argument of type 'long long unsigned int', but argument 2 has type 'u64' [-Werror=format=]
Change-Id: Ibc2bf8597cb86db5b2e71fba77ec837a08c5e3d4
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/3301
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
cbmem currently fails to build due to `-Werror` and the following
warning.
$ make
cc -O2 -Wall -Werror -iquote ../../src/include -iquote ../../src/src/arch/x86 -c -o cbmem.o cbmem.c
cbmem.c: In function ‘map_memory’:
cbmem.c:87:2: error: format ‘%zx’ expects argument of type ‘size_t’, but argument 2 has type ‘off_t’ [-Werror=format]
[…]
Casting the argument of type `off_t` to `intmax_t` and using the
length modifier `j`
$ man 3 printf
[…]
j A following integer conversion corresponds to an intmax_t or uintmax_t argument.
[…]
instead of `z` as suggested in [1] and confirmed by stefanct and
segher in #coreboot on <irc.freenode.net>, gets rid of this warning
and should work an 32-bit and 64-bit systems, as an `off_t` fits
into `intmax_t`.
[1] http://www.pixelbeat.org/programming/gcc/int_types/
Change-Id: I1360abbc47aa1662e1edfbe337cf7911695c532f
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/3083
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Now users can use a different compiler from GCC like Clang by for example
doing `CC=clang make`.
Change-Id: I664a36df79f7496a56d89bdb61948b2eda33a6b4
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/3082
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Currently on a 32-bit system cbmem fails to build due to `-Werror`
and the following warning.
$ make
cc -O2 -Wall -Werror -iquote ../../src/include -iquote ../../src/src/arch/x86 -c -o cbmem.o cbmem.c
[…]
cbmem.c: In function ‘parse_cbtable’:
cbmem.c:135:2: error: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 2 has type ‘u64’ [-Werror=format]
cc1: all warnings being treated as errors
[…]
Using the length modifier `ll` instead of `l` gets rid of this
warning.
Change-Id: Ib2656e27594c7aaa687aa84bf07042933f840e46
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/3084
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Current code outputs the whole cbmemc buffer even if only part of
it is really used. Fix it to output only the used part and notify
the user if the buffer was too small for the required data.
Change-Id: I68c1970cf84d49b2d7d6007dae0679d7a7a0cb99
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/2991
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
In order to provide some insight on what code is executed during
coreboot's run time and how well our test scenarios work, this
adds code coverage support to coreboot's ram stage. This should
be easily adaptable for payloads, and maybe even romstage.
See http://gcc.gnu.org/onlinedocs/gcc/Gcov.html for
more information.
To instrument coreboot, select CONFIG_COVERAGE ("Code coverage
support") in Kconfig, and recompile coreboot. coreboot will then
store its code coverage information into CBMEM, if possible.
Then, run "cbmem -CV" as root on the target system running the
instrumented coreboot binary. This will create a whole bunch of
.gcda files that contain coverage information. Tar them up, copy
them to your build system machine, and untar them. Then you can
use your favorite coverage utility (gcov, lcov, ...) to visualize
code coverage.
For a sneak peak of what will expect you, please take a look
at http://www.coreboot.org/~stepan/coreboot-coverage/
Change-Id: Ib287d8309878a1f5c4be770c38b1bc0bb3aa6ec7
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/2052
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: Martin Roth <martin@se-eng.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
... without the need for a coreboot table entry for each of them.
Change-Id: I2917710fb9d00c4533d81331a362bf0c40a30353
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/2117
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
... and indent it to make output more comprehensible.
Change-Id: If321f3233b31be14b2723175b781e5dd60dd72b6
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/2116
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
This adds an option to the cbmem utility to dump the cbmem console.
To keep the utility backwards compatible, specifying -c disables
printing of time stamps. To print both console and time stamps, run
the utility with -ct
Change-Id: Idd2dbf32c3c44f857c2f41e6c817c5ab13155d6f
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/2114
Tested-by: build bot (Jenkins)
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
|
|
The first version of the cbmem utility was written in python,
but it had issues with 64bit systems and other little hick ups.
Since the C version has much fewer dependencies (no python needed
on target system), and it works in all corner cases, drop the
python version.
Change-Id: Ida3d6c9bb46f6d826f45538e4ceaa4fc1e771ff5
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/2115
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Tested-by: build bot (Jenkins)
|
|
The kernel on Ubuntu 12.04LTS does not allow to use
fseek/fread to read the coreboot table at the end of
memory but will instead abort cbmem with a "Bad Address"
error.
Whether that is a security feature (some variation of
CONFIG_STRICT_DEVMEM) or a kernel bug is not yet clear,
however using mmap works nicely.
Change-Id: I796b4cd2096fcdcc65c1361ba990cd467f13877e
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/2097
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
|
|
The tool could print much more useful information than
just time stamps, for example the cbmem console on systems
that don't have a kernel patched to support /sys/firmware/log.
Hence, add command line option parsing to make adding such
features easier in the future.
Change-Id: Ib2b2584970f8a4e4187da803fcc5a95469f23a6a
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/2091
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Tested-by: build bot (Jenkins)
|
|
The appropriate compiler (provided by the build system) is used to
ensure proper toolchain options are used.
cbmem.c is being modified to suppress pointer to integer typecast
warnings.
Change-Id: Ibab2faacbd7bdfcf617ce9ea4296ebe7d7b64562
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: http://review.coreboot.org/1791
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Coreboot and u-boot create a table of timestamps which allows to see
the boot process performance. The util/cbmem/cbmem.py script allows to
access the table after ChromeOS boots up and display its contents on
the console. The problem is that shipping images do not include Python
interpreter, so there is no way to access the table on a production
machine.
This change introduces a utility which is a Linux app displaying the
timestamp table. Conceivably the output of this utility might be
included in one of the ChromeOS :/system sections, so it was attempted
to write this procedure 'fail safe', namely reporting errors and not
continuing processing if something goes wrong.
Including of coreboot/src .h files will allow to keep the firmware
timestamp implementation and this utility in sync in the future.
Test:
. build the utility (run 'make' while in chroot in util/cbmem)
. copy `cbmem' and 'cbmem.py' to the target
. run both utilities (limiting cbmem.py output to 25 lines or so)
. observe that the generated tables are identical (modulo rounding
up of int division, resulting in 1 ns discrepancies in some
cases)
localhost var # ./cbmem
18 entries total:
1:62,080
2:64,569 (2,489)
3:82,520 (17,951)
4:82,695 (174)
8:84,384 (1,688)
9:131,731 (47,347)
10:131,821 (89)
30:131,849 (27)
40:132,618 (769)
50:134,594 (1,975)
60:134,729 (134)
70:363,440 (228,710)
75:363,453 (13)
80:368,165 (4,711)
90:370,018 (1,852)
99:488,217 (118,199)
1000:491,324 (3,107)
1100:760,475 (269,150)
localhost var # ./cbmem.py | head -25
time base 4249800, total entries 18
1:62,080
2:64,569 (2,489)
3:82,520 (17,951)
4:82,695 (174)
8:84,384 (1,688)
9:131,731 (47,347)
10:131,821 (89)
30:131,849 (27)
40:132,618 (769)
50:134,594 (1,975)
60:134,729 (134)
70:363,440 (228,710)
75:363,453 (13)
80:368,165 (4,711)
90:370,018 (1,852)
99:488,217 (118,199)
1000:491,324 (3,107)
1100:760,475 (269,150)
Change-Id: I013e594d4afe323106d88e7938dd40b17760621c
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: http://review.coreboot.org/1759
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This is a cosmetic change which formats timestamp information
retrieved by cbmem.py.
Instead of printing timestamps in a single line, print them one per
line and add time (in us) elapsed since the previous timestamp.
time base 4149594, total entries 18
1:56,928
2:58,851 (1,923)
3:175,230 (116,378)
4:175,340 (109)
8:177,199 (1,859)
9:214,368 (37,168)
10:214,450 (81)
30:214,462 (11)
40:215,205 (743)
50:217,180 (1,974)
60:217,312 (132)
70:436,984 (219,671)
75:436,993 (8)
80:441,424 (4,431)
90:442,487 (1,062)
99:553,777 (111,289)
1000:556,513 (2,736)
1100:824,621 (268,107)
Change-Id: I0d25cafe766c10377017697e6b206276e1a92992
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: http://review.coreboot.org/1716
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
For some reason which I fail to understand, specifying endiannes using
'@' (which means 'native' and should be the same as '<' on x86
platforms) causes cbmem.py to crash the machine on 64 bit systems.
What happens is that the addresses read from various table headers'
struct representations do not make sense, when bogus address gets
passed to get_phys_mem, the crash happens while that function is
executed.
dlaurie@ found out that replacing "@" with "<" in fact fixes the
issue. After some investigation I am just submitting this fix without
much understanding of the root cause.
Change-Id: Iaba9bc72a3f6b1d0407a5f1e3b459ccf5063969d
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: http://review.coreboot.org/1715
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
This change makes significant changes to cbmem.py to make it use the
coreboot tables to find the memory console and timestamp areas instead
of looking for the in memory table TOC structure. That appears to be
more robust and gets cbmem.py working again after some unrelated
changes that affected memory layout.
It also introduces some small infrastructure to make accessing C style
structures in physical memory easier and more transparent.
Change-Id: I51833055a50c2d76423520ba6e059bf8fc50adea
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: http://review.coreboot.org/762
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
This is a python script which is supposed to run on a target
which is controlled by coreboot. The script examines top of
memory looking for the CBMEM signature at addresses aligned at
128K boundary. Once the script finds the CBMEM, it iterates
through the CBMEM table of contents and parses two entries: the
timestamps and the console log.
This submission is just a template to build upon to create a
utility for displaying CBMEM information while running Linux on
the target.
BUG=chrome-os-partner:4200
TEST=manual
See test description of d81e6b8c8d41f2d6 for test procedure.
Change-Id: Id863a8598eaadc2d20d728f9186843e65cbe6f37
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://gerrit-int.chromium.org/5942
Tested-by: Vadim Bendebury <vbendeb@google.com>
Reviewed-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/723
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
