| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4988 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
to be stated in kilobytes or megabytes. Usage is
cbfstool coreboot.rom create 1048576 coreboot.bootblock
cbfstool coreboot.rom create 1024k coreboot.bootblock
cbfstool coreboot.rom create 1m coreboot.bootblock
to get an 1048576 bytes = 1024kb = 1mb image.
Kconfig also uses this instead of calculating bytes from kilobytes itself.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4987 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
- don't pretend to create a bootblock as large
as the ROM in Kconfig (it's 64k at most)
- don't pretend to accept a bootblocksize value
in cbfstool create (it ignored it)
- patch up the build systems to keep it working
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4934 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
out a suitable address to put a XIP stage to.
Specifically, you pass it the file (to get its filesize), its filename
(as the header has a variable length that depends on it), and the
granularity requirement it has to fit in (for XIP).
The granularity is MTRR-style: when you request 0x10000, cbfstool looks
for a suitable place in a 64kb-aligned 64kb block.
cbfstool simply prints out a hex value which is the start address of a
suitably located free memory block. That value can then be used with
cbfs add-stage to store the file in the ROM image.
It's a two-step operation (instead of being merged into cbfs add-stage)
because the image must be linked twice: First, with some bogus, but safe
base address (eg. 0) to figure out the target address (based on file
size). Then a second time at the target address.
The work flow is:
- link file
- cbfstool locate
- link file again
- cbfstool add-stage.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4929 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
and report the correct error code, and a hopefully helpful
error message.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4692 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
bad: It brings a certain amount of code duplication (some of which can be
cleaned up again, or get rid of by proper refactoring).
On the other hand now there's a very simple code flow for each command, rather
than for each operation. ie.
adding a file to a cbfs means:
- open the cbfs
- add the file
- close the cbfs
rather than
open the cbfs:
- do this for add, remove, but not for create
create a new lar
- if we don't have an open one yet
add a file:
- if we didn't bail out before
close the file:
- if we didn't bail out before
The short term benefit is that this fixes a problem where cbfstool was trying
to add a file if you gave a non-existing command because it bailed out on
known, not on unknown commands.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4654 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
cbfstool. (trivial)
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4634 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
supports fixed location files. Some parts are salvaged
from the pre-commit version (esp. stage and payload creation),
others are completely rewritten (eg. the main loop that handles
file addition)
Also adapt newconfig (we don't need cbfs/tools anymore) and fix
some minor issues in the cbfstool-README.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4630 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Change sizes from unsigned int to int.
Clean up some usage and parameter checking.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4262 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
cbfstool extract [FILE] [NAME]
It also factors out the csize calculation in rom_add, and fixes rom_delete so
that it can handle deleting the last entry.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4144 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
It's all sed here. romfs->cbfs, ROMFS->CBFS, romtool->cbfstool
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4110 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
