summaryrefslogtreecommitdiff
path: root/targets
AgeCommit message (Expand)Author
2009-10-21Add CONFIG_VGA_ROM_RUN to HP e-Vectra P2706T to make VGA init work.Uwe Hermann
2009-10-20Add initial support for the HP e-Vectra P2706T.Uwe Hermann
2009-10-16Add CONFIG_VGA_ROM_RUN to dbm690t and pistachio, otherwise theZheng Bao
2009-10-14Add forgotten target files for technexion/tim5690.Libra Li
2009-10-13Add support for the MSI MS-6156 board.Uwe Hermann
2009-10-13Fix kontron/kt690 build.Myles Watson
2009-10-13This patch adds (initial) support for the Kontron KT690 mainboard. Stefan Reinauer
2009-10-08Simplify targets/amd/serengeti_cheetah/Config.lb. There were too manyMyles Watson
2009-10-07Major CONFIG_IRQ_TABLE_COUNT fixing and cleanups. Some of these boardsUwe Hermann
2009-10-04This does away with CONFIG_ROM_PAYLOAD_START and CONFIG_PAYLOAD_SIZE.Patrick Georgi
2009-10-03Remove:Patrick Georgi
2009-10-02Remove the Embedded Planet board.Ronald G. Minnich
2009-10-02Remove left-over targets/motorola/*, fix Dell PowerEdge 1850 name.Uwe Hermann
2009-10-02Drop remainders of the removed Totalimpact board. Fix typos.Uwe Hermann
2009-09-30Add supermicro h8dmr fam10 target. This is largely a mashup of the tyan s2912Ward Vandewege
2009-09-22failoverR.diff: Revert my failover change since Kconfig only supports fallback.Myles Watson
2009-09-15This is an otherwise dead platform. I'm just committing the basics that Ronald G. Minnich
2009-08-28This patch adds VGA and PS/2 Keyboard/mouse support to the already existing i...Arnaud Maye
2009-08-28Fix broken compilation. As CBFS is now enabled by default,Arnaud Maye
2009-08-27Change some more image names to "fallback" (not "image").Uwe Hermann
2009-08-27Rename "image" image to "fallback", so CBFS can find it.Patrick Georgi
2009-08-27amd/pistachio: fallback image must be called fallback.Carl-Daniel Hailfinger
2009-08-27fallback image must be called fallback.Stefan Reinauer
2009-08-19Config-abuild.lb doesn't need to override ROM_IMAGE_SIZE.Patrick Georgi
2009-08-12Kconfig!Patrick Georgi
2009-08-11Enable CBFS everywhere. All boards compiled for me (abuild tested),Patrick Georgi
2009-07-07Add pci_rawops.h from the mailing list and fix the via/epia-m700 build.Myles Watson
2009-07-05Add support for the Mitac 6513WU mainboard, a Compaq OEM board using theMichael Gold
2009-07-05Enable onboard VGA on the MS-6178 (i810 chipset) board (trivial).Uwe Hermann
2009-07-02Convert Supermicro H8DMR to CBFS. Also clean up some whitespace inWard Vandewege
2009-07-01Add support for the Intel Eagle Heights development board.Thomas Jourdan
2009-07-01Fix abuild for via/epia-n. Trivial.Myles Watson
2009-07-01Ron,Jon Harrison
2009-06-30the tool chain settings should not be in renamed (as they will never live inStefan Reinauer
2009-06-30whoops. missed those two..Stefan Reinauer
2009-06-30This patch unifies the use of config options in v2 to all start with CONFIG_Stefan Reinauer
2009-06-27Add a target/ directory for the VIA EPIA-M700 board, so we can build it.Uwe Hermann
2009-06-24Add support for the Soyo SY-6BA+ III board.Uwe Hermann
2009-06-19Convert the MSI MS-6178 board to CBFS.Uwe Hermann
2009-06-16These changes implement car in qemu. The implementation is in several Ronald G. minnich
2009-06-08Add (commented) line for VGA blob adding (CBFS version) to simplify things fo...Uwe Hermann
2009-06-06Change the CBFS build process to use coreboot.romPatrick Georgi
2009-05-29rename the option CONFIG_PCI_OPTION_ROM_RUN_VM86 to CONFIG_PCI_OPTION_ROM_RUN...Joseph Smith
2009-05-29enable/disable IDE 0/1 (Primary/Secondary) interfaces on the i82801xx southbr...Joseph Smith
2009-05-27Move coreboot_ram and coreboot_apc to CBFS. This allows to Patrick Georgi
2009-05-21Defaulting to the board's default size is the correct thing to do.Myles Watson
2009-05-19Trivial update of Config-lab.lb so that it works again.Myles Watson
2009-05-15There were a few updates lately that generates ROM size > 512K. I am changing...Vincent Lim
2009-05-12This is the final patch that got everything working for me with the HP dl145g3.Samuel Verstraete
2009-05-12I guess a couple of function calls pushed these boards over the 0x1700 edge onMyles Watson
2009-05-12Trivially copy Config.lb to Config-abuild.lb to fix asus/m2v-mx_se.Myles Watson
2009-05-11Fix manual build on the Kontron board (trivial).Uwe Hermann
2009-05-10Following patch fixes the XIP computation issue. I removed the normal imageRudolf Marek
2009-05-08Trivial fixup IRQS on IP1000 and RM4100.Joseph Smith
2009-05-02Run dos2unix on all files:Stefan Reinauer
2009-05-01This patch changes the default rom emulator to VM86. Joseph Smith
2009-04-30* Use latest version of intel microcodes from their Linux drivers page forStefan Reinauer
2009-04-29increase image sizeStefan Reinauer
2009-04-27Migrate via/vt8454c to CBFS.Patrick Georgi
2009-04-26Use pci_rom, as we have it. Thanks Myles!Patrick Georgi
2009-04-25Enable CBFS for qemu and kontron. Both are builds-and-runsPatrick Georgi
2009-04-23Add VERSION to hp/dl145_g3. Trivial.Myles Watson
2009-04-22fix compilation of hp dl145Stefan Reinauer
2009-04-22This patch adds the target hp/dl145_g3 together withMondrian nuessle
2009-04-22increase rom sizes for abuildStefan Reinauer
2009-04-21Add an "-l <num>" argument to abuild that sets the LOGLEVEL variablesPatrick Georgi
2009-04-18Add support for the ASUS P2B-D mainboard.Uwe Hermann
2009-04-17Add VIA CX700 support, plus VIA vt8454c reference board support.Stefan Reinauer
2009-04-07add Config-abuild for the new board (trivial)Stefan Reinauer
2009-04-06Some changes for option roms: Ronald G. Minnich
2009-04-06Daniel Toussaint wrote:Daniel Toussaint
2009-03-20Add Supermicro h8dm3 mainboard. This is mostly a copy from the h8dmr.Marc Jones
2009-03-13This, ladies and gentlement, is commit #4000.Stefan Reinauer
2009-03-06clean up qemu target config (trivial)Stefan Reinauer
2009-02-13This target is dead. Ronald G. Minnich
2009-02-13Increase ROM_IMAGE_SIZE for the agami aruma to resolve overlappingCarl-Daniel Hailfinger
2008-12-22In the process of trying to debug some HT sync problems I added lots ofCarl-Daniel Hailfinger
2008-12-19Add some comments to make it easier to enable onboard VGA forUwe Hermann
2008-12-15Add initial support for the ASUS P2B-DS (dual-CPU) mainboard.Uwe Hermann
2008-12-09AMD PISTACHIO mainboard support.Maggie Li
2008-12-05Add initial support for the NEC PowerMate 2000 board.Uwe Hermann
2008-11-26Increase the qemu rom size (non-LAB) to 512KB so that grub2 fits.Ward Vandewege
2008-11-20fix Config-abuild.lb for all targets that need a failover image andStefan Reinauer
2008-11-19Coding-style and whitespace fixes (also to make the code more similarUwe Hermann
2008-11-19Add support for the LiPPERT Cool RoadRunner-LX embedded PC board:Jens Rottmann
2008-11-14Rename LinuxBIOS strings and filenames to coreboot.Uwe Hermann
2008-11-06Re-add "based on" lines.Uwe Hermann
2008-11-03Move the default payload to be more buildrom friendly.Jordan Crouse
2008-10-30Leave room for ROM growth and for the payload. (trivial)Marc Jones
2008-10-30Increased the size of the failover and normal ROM_IMAGE_SIZE so abuild willMarc Jones
2008-10-30Here's a patch towards r3690 upping the ROM size for the S2912 Fam10 target t...Arne Georg Gleditsch
2008-10-30Add support for the LiPPERT Cool SpaceRunner-LX embedded PC board:Jens Rottmann
2008-10-29Support for the Kontron 986LCD-M mainboard series.Stefan Reinauer
2008-10-27Add initial support for the MSI MS-6147 mainboard.Mats Erik Andersson
2008-10-17Config-abuild.lb's for jetway/j7f24 and bcom/winnetp680, to (finally) get abu...Corey Osgood
2008-10-16* Add a new board, the BCom WinNET P680Alex Mauer
2008-10-13Add support for the Intel EP80579 (Tolapai) Development Kit mainboardEd Swierk
2008-10-12Add support for the VIA pc2500e mainboard (CN700 + VT8237R).Uwe Hermann
2008-09-30Coding-style fixes and simplifications for the ASUS A8N-E (trivial).Uwe Hermann
2008-09-29AMD K8 platforms must use CAR so it makes sense to use the PRINK_IN_CARMarc Jones
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-24 05:24:19 +0000