| Age | Commit message (Collapse) | Author |
|---|
|
pertinent header file
This patch moves ME host firmware status register structures to ME
header file. It also marks unused structure fields to reserved.
The idea here is to decouple ME specification defined structures from
the source file `.c` and keep those into header files so that in future
those spec defined header can move into common code.
The current and future SoC platform will be able to select the correct
ME spec header based on the applicable config. It might be also
beneficial if two different SoC platforms would like to use the same
ME specification and not necessarilly share the same SoC directory.
BUG=b:260309647
Test=Able to build and boot Google/brya.
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: Ic14305b0479a8c57531d9930946eded7ac518b09
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71625
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Make will not find the build targets unless quotes are removed.
Change-Id: Iddf4e0cd8a11eaf327d6f55baf38a30c566d0f28
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71519
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The patch that introduced the selection of software connection manager,
CB:64561 - 060df17f1d (soc/intel/alderlake/acpi: Add Kconfig options for
SCM and FCM) added a default to enable the software configuration
manager directly in the choice.
This leads to warnings when running make menuconfig:
src/soc/intel/alderlake/Kconfig:439:
warning: defaults for choice values not supported
src/soc/intel/meteorlake/Kconfig:337:
warning: defaults for choice values not supported
src/soc/intel/tigerlake/Kconfig:299:
warning: defaults for choice values not supported
I'm not sure why the Kconfig linter didn't catch this, but this
issue is currently breaking the build for me. This patch fixes
it so that instead of setting the default directly, a new Kconfig
value is selected that then sets the default correctly.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I674046a93af8f7c2f3003900804deefa89dae295
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71776
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
Not all ports have retimers. Add a property to denote that a particular
port has a retimer (instead of assuming that all ports have retimers).
BUG=b:263964979
TEST=Verified on guybrush; SSDT shows retimer-switch on port1 when
device tree is updated accordingly.
Change-Id: I754323236d2912777b63cede0fce2ccf7882cfea
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71663
Reviewed-by: Robert Zieba <robertzieba@google.com>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ib24129829bef3764a8ba1e2c0d92bc42c5cfbc8d
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69708
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Change-Id: I3013bd5f29f1412fbe646dc74d8946704b750a66
Ticket: https://ticket.coreboot.org/issues/423
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69445
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
TCPA usually refers to log described by TPM 1.2 specification.
Change-Id: I896bd94f18b34d6c4b280f58b011d704df3d4022
Ticket: https://ticket.coreboot.org/issues/423
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69444
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
We will use BOE_TV110C9M_LL0 for geralt proto board, so update the
panel setting.
BUG=none
TEST=emerge-geralt coreboot;
see panel-BOE_TV110C9M_LL0 in coreboot.rom
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I28e9dd87350b55fdc609dd2c562c5a2ad578187c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71786
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
We should keep booting even failed to get the MIPI panel.
BUG=none
TEST=emerge-geralt coreboot;
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I39d9e04e5908f669ae2a1a8ce8858b93cae20654
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71785
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update setting for touchpad I2C frequency.
And meet touchpad i2c SPEC (380 ~ 400 kHz).
BUG=b:261159229
TEST=On frostflow, touchpad i2c spec from EE measure
Frequencies: I2C0 (Touchpad): 389 kHz
Change-Id: Ie9efd4e597e2701c98064185e5b39a6e256a5f1c
Signed-off-by: Rex Chou <rex_chou@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71772
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
|
|
cxl_mode VPD variable supports 3 modes: CXL_DISABLED,
CXL_SYSTEM_MEMORY and CXL_SPM.
Change-Id: Ib3bf85fbe687680db3c11efa908c4fb351be9c44
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71100
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
|
|
The Data Protected Range (DPR) needs to be set for all DPR devices,
not only the root device. Separate the setup from the memory
resource map reservation.
Change-Id: I7e49db23960e3938e8e158082be3c5ecf3cf95f3
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71143
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
|
|
Alder Lake and Tiger Lake had unnecessary lower-case 'i' in GPP_C0_IRQ
define name.
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Change-Id: Ida892b00e5a28544950cb9863d0ff2408a514576
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71819
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
|
|
A mainboard port needs to:
- select `CONFIG_MAINBOARD_HAS_EARLY_LIBGFXINIT'
- implement the Ada package `GMA.Mainboard' with a single function
`ports' that returns a list of ports to be probed for displays.
- set the desired `GFX_GMA_DEFAULT_MMIO' IO memory address to use
in romstage (and ramstage) for the graphic device.
BUG=b:252792591
BRANCH=firmware-brya-14505.B
TEST=libgfxinit compiles in romstage.
libgfxinit successfully executes in romstage and ramstage using
the requested MMIO setting on skolas.
Change-Id: I3c2101de10dc5df54fe873e43bbe0f1c4dccff44
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70276
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
SA_DEV_IGD is used by the early graphics feature implemented by the
Intel common block.
BUG=b:252792591
BRANCH=firmware-brya-14505.B
TEST=Compilation
Change-Id: Ic9f0fe1683d55a53c705ae717fe9e40fd8873d1f
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71793
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
As the used 'bool' type is defined in stdbool.h, include types.h
(instead of stdint.h) which includes all needed header files.
Change-Id: I3f75776575a7a5f70484411b9f3458530f706ec4
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71790
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds OC configuration of USB devices for MTL-RVP
as per MTL-RVP design specification,
USB 2.0
usb2_ports0 -> OC0
usb2_ports1 -> OC0
usb2_ports2 -> OC0
usb2_ports3 -> OC0
usb2_ports4 -> OC0
usb2_ports5 -> OC0
usb2_ports6 -> OC_SKIP
usb2_ports7 -> OC_SKIP
usb2_ports8 -> OC_SKIP
usb2_ports9 -> OC_SKIP
USB 3.2 Gen 2x1
usb3_ports0 -> OC0
usb3_ports1 -> OC0
TCPx
tcss_ports0 -> OC0
tcss_ports1 -> OC0
tcss_ports2 -> OC0
tcss_ports3 -> OC0
BUG=b:224325352
TEST=Able to build with the patch and boot the mtlrvp to chromeOS
(on top of CB: 66190).
Signed-off-by: Harsha B R <harsha.b.r@intel.com>
Change-Id: If1a0c31b7bf0f3fc06f039ad76b0cdd41f7cdd90
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71168
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Usha P <usha.p@intel.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
Disable devices in variant.c instead of adding probe statements to
devicetree because storage devices need to be enabled when fw_config is
unprovisioned, and devicetree does not currently support this (it
disables all probed devices when fw_config is unprovisioned).
BUG=b:263920313
TEST=Boot to OS on craask eMMC and NVMe SKUs with both unprovisioned
fw_config and fw_config set correctly.
Change-Id: I4167ee4d00b9ae8fe074c6f5e7a2d5a7382bfe6d
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71726
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
Disable devices in variant.c instead of adding probe statements to
devicetree because storage devices need to be enabled when fw_config is
unprovisioned, and devicetree does not currently support this (it
disables all probed devices when fw_config is unprovisioned).
BUG=b:251055188
TEST=Boot to OS on yaviks eMMC and UFS SKUs with both unprovisioned
fw_config and fw_config set correctly.
On UFS SKU with fw_config set, eMMC no longer shows up in lspci.
(On eMMC SKU, UFS and ISH were already disabled by the coreboot PCI scan
so there's no change in behaviour.)
Change-Id: I31402cb49cffefd98b6fed971f249528448b1d0d
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71725
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
Add new memory parts in the mem_parts_used.txt and generate the
SPD ID for the parts. The memory parts being added are:
1) Samsung K3KL8L80CM-MGCT
2) Hynix H58G56BK7BX068
3) Micron MT62F1G32D2DS-026 WT:B
4) Micron MT62F512M32D2DR-031 WT:B
BUG=b:264340545
BRANCH=firmware-brya-14505.B
TEST=FW_NAME=omnigul emerge-brya coreboot
Change-Id: I699070596a77c975254660a1ba74b0f40026186d
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71756
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
It used to say "FSP-M binary larger than FSP_M_FILE", but
FSP_M_FILE is the binary itself. The binary file size is
actually compared with FSP_M_SIZE.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Change-Id: If58069944aea8e68117f2ee1d320726d8c6fdfc8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65440
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
This patch adds initial romstage code and spd data for DDR5 memory
parts for MTL-RVP. This also configures memory based on the board id.
Memory - x32 DDR5 SBS SODIMM 1DPC
Vendor/Model - SK-Hynix/HMCG66MEBSA092N
BUG=b:224325352
TEST=Able to boot intel/mtlrvp (DDR5 SKU) to ChromeOS
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Change-Id: I0e1a26d99e170311a89412f44b7cbb0430788f58
Signed-off-by: Harsha B R <harsha.b.r@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66190
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Usha P <usha.p@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Add supported memory parts in the mem_parts_used.txt and generate the
SPD ID for the parts.
BUG=b:260934724, b:255447299
BRANCH=dedede
TEST=build
Change-Id: I8c95ced79e14bb4a99aa1fa5f4fc3bc0681cc1cc
Signed-off-by: Liam Flaherty <liamflaherty@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71710
Reviewed-by: Adam Mills <adamjmills@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Sam McNally <sammc@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add the first version DPTF parameters.
BUG=b:264217345
BRANCH=firmware-brya-14505.B
TEST=emerge-brya coreboot chromeos-bootimage
Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com>
Change-Id: I55a3066ef61ce461f40b425a6549d083c29256e5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71634
Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Kyle Lin <kylelinck@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
The patch adds Kconfigs to define scaling factor for Efficient and
Performance cores instead of using hard coded values in the soc code.
Also, the patches uses the Kconfigs directly to calculate the core's
nominal performance. So, we don't need to implement soc function
soc_get_scaling_factor() to get the scaling factor data for different
core types. Hence, soc_get_scaling_factor() function is removed.
TEST=Build the code for Gimble and Rex. Also, I have verified that
build system logs error when the Kconfigs are undefined.
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I55e4d815116ef40c5f33be64ab495e942bf35ee8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71687
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Replace the intelblocks/gpio.h, soc/gpio.h and soc/gpio_defs.h
includes with the common gpio.h which will include soc/gpio.h
which will include intelblocks/gpio.h which will include
soc/gpio_defs.h
BUG=b:261778357
TEST=Able to build and boot Google/rex.
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: I58e428cde5e13f4f0dfe528d798c0613b7f8a94a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71630
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
When the watchdog timer reaches 0, the timer value won't reset to the
default value unless there is an external reset or a kick. It will
result in the watchdog failing to trigger the reset signal.
We kick the watchdog to reset the timer to the default value. Also,
because WDT hardware needs about 94us to synchronize the registers,
add a 100us delay before triggering the reset signal.
BUG=b:264003005, b:264017048
BRANCH=corsola
TEST= Reboot successfully with the following cmd
stop daisydog
sleep 60 > /dev/watchdog&
Signed-off-by: Runyang Chen <runyang.chen@mediatek.corp-partner.google.com>
Signed-off-by: Kuan-Hsun Cheng <allen-kh.cheng@mediatek.com>
Change-Id: Ic4964103d54910c4a1e675b59c362e93c2213b19
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71754
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When AP boots up after Cr50 firmware update and reboot, AP finds
that Cr50 reset is required for Cr50 to pick the new firmware so
it trigger Cr50 reset and power off the system, AP expects system
will power on automatically after Cr50 reset. However this is not
the case for Chromebox, Chromebox EC set AP_IDLE flag when system
is shutting down, when AP_IDLE flag is set in EC, the system stays
at S5/G3 and wait for power button presssend. It cause an issue in
factory that the operator needs to press power button to power on
the DUT after Cr50 firmware update.
This patch sends EC command to direct EC to clear AP_IDLE flag
after AP shutdown so AP can boot up when Cr50 reset.
BUG=b:261119366
BRANCH=firmware-brya-14505.B
TEST=DUT boots up after Cr50 firmware update in factory test flow
Change-Id: If97ffbe65f4783f17f4747a87b0bf89a2b021a3b
Signed-off-by: Derek Huang <derekhuang@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70773
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch introduces a new config named `DEFAULT_ADL_NEM` and
allows respective brya variants with Alder Lake ESx samples to
choose NEM over eNEM as eNEM was fuse disabled till ESx.
TEST=The boot flow related to eNEM and NEM behaviour remains the
same with and without this patch.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ibbd492a3d210739120c7ad16415cb7912f5b70ec
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71743
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Disable touch panel power for non-touch sku by fw_config TOUCH field.
BUG=b:263452842
BRANCH=firmware-brya-14505.B
TEST=emerge-brya coreboot chromeos-bootimage
Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com>
Change-Id: I4736f94481512806377b733b26fdc7290046c555
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71691
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kyle Lin <kylelinck@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Due to mainboard restrictions a SATA link at Gen 3 (6 Gbps) can cause
issues as the margin is not big enough. Limit SATA speed to Gen 2 to
achieve a more robust SATA connection.
Change-Id: Ia79998db5f959528a4e8e29e570a7f55283adee1
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71230
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
In cases where there are limitations on the mainboard it can be
necessary to limit the used SATA speed even though both, the SATA
controller and disk drive support a higher speed rate. The FSP parameter
'SataSpeedLimit' allows to set the speed limit.
This patch provides a chip config so that this FSP parameter can be
set as needed in the devicetree on mainboard level.
Change-Id: I610263b34b0947378d2025211ece4a9ec8fbfef6
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71229
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Change-Id: Id24a7c7db24f49672df9d5ceefec5b7596f23e09
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64939
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Now that power sequencing has been implemented, switch from using ACPI
"probed" flag to "detect" flag for all i2c touchscreens. This removes
non-present devices from the SSDT and relieves the OS of the burden of
probing.
BUG=b:121309055
TEST=build/boot Windows/linux on multiple dedede variants, verify all
touchscreens functional in OS, dump ACPI and verify only i2c devices
actually present on the board have entries in the SSDT.
Change-Id: I91e03bd1d96a6b2f0c3813665910133db0d6c308
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71189
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
The GPIOs themselves are configured as level triggered, and the drivers
(both Linux and Windows) work better with LEVEL vs EDGE triggering.
TEST=tested with rest of patch train
Change-Id: I212533ffdfb05f841e722c130b52c2976272e670
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71188
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
For touchscreens on dedede variants, drive the enable GPIO high
starting in romstage, then disable the reset GPIO in ramstage. This will
allow coreboot to detect the presence of i2c touchscreens during ACPI
SSDT generation (implemented in a subsequent commit).
Since the fast majority of dedede variants have a touchscreen option,
and those that do use the same GPIOs for enable/reset, set the GPIOs for
touchscreen operation in the baseboard and then override for the few (3)
variants that do not have a touchscreen.
BUG=b:121309055
TEST=tested with rest of patch train
Change-Id: Ib95e23545cc3e8589ddbd9e18cd0533bec9333e0
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71187
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Add method variant_romstage_gpio_table() with empty weak implementation
to allow variants to override as needed for touchscreen power
sequencing (to be implemented in a subsequent commit). Call method
in romstage to program any GPIOs the variant may need to set.
TEST=tested with rest of patch train
Change-Id: Ic216827a4b53d1d35913efca63a43d4672791c54
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71186
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Change-Id: I080b7b579338c3cf342beabda54f43f525d8b65c
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71679
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: I5169a900345e2aabefcf1e2c249ee4bce6dc8fc5
Signed-off-by: Ritul Guru <ritul.bits@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71688
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: Ieaad72a6b964f4b2ab572733694def88e30888a3
Signed-off-by: Ritul Guru <ritul.bits@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71689
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Remove TODO comments after reviewing against mendocino ppr #57243, rev
3.00
BUG=263563246
TEST=build skyrim
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: Ie56d481dd8b6b4e0a1e3d50f4ce75f50231fe4dc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71719
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Replace spaces with tabs for consistency.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I65b9bec7443094dfd2f6b0d6b11e0100023873b2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71721
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Remove redundant nested check for ACPI support.
Change-Id: Ie4b40382d304028135bcdd7851e2f48333570421
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66698
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
This avoids the warning of casting pointers to integers of different
size.
Change-Id: I7bcb6dbf286438115c854d618eaa2da21c81400d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69389
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
The dGPU used for some Brya projects requests 33 bits of address
space for one of its BARs via the Resizable BAR mechanism
(requires 6GB).
This Kconfig is currently set at 32 bits for brya, so the allocation currently is capped at 32 bits (4GB). This patch sets the limit to 33
bits for brya boards, which is enough for the GPU.
BUG=b:214443809
TEST=all of the dGPU PCI BARs on agah can be successfully allocated
Change-Id: Ia791be5108fb07a256ae62fc2aee2f057909ef12
Signed-off-by: Tarun Tuli <tarun@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71282
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Adjust LAN LED config to 0x060f.
BUG=b:246657849
TEST=emerge-brask coreboot
Change-Id: Idd5ed2bf7eb4ee5990f2a842cba43f967ae3825e
Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71698
Reviewed-by: Kevin Chiu <kevin.chiu.17802@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ricky Chang <rickytlchang@google.com>
|
|
Adjust LAN LED config to 0x060f.
BUG=b:239513596
TEST=emerge-brask coreboot
Change-Id: I17b844b89569fb7653454fd08782fc961c715817
Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71697
Reviewed-by: Kevin Chiu <kevin.chiu.17802@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ricky Chang <rickytlchang@google.com>
|
|
get_cpu_index() helper function returns cpu's index based on it's APIC
id position from the ascending order list of cpus' APIC IDs.
In order to calculate the cpu's index, the helper function needs to
traverse through each cpu node to find their APIC IDs. So, the function
traverse the CPU node list from the cpu whose APIC ID is 0 assuming it
is the first cpu node in the list. This logic works fine where BSP's
APIC ID is 0. But, starting from MTL, APIC ID for BSP need not be 0 as
APIC ID numbering first get assigned for CPU Die Efficient cores, then
Performance cores.
Please refer section# 6.1 of doc#643504 for more details on APIC IDs.
Considering the APIC Id allotment for MTL cores, as existing code
traversing begins from the cpu that has APIC Id#0 which may not be the
first cpu node in the list so index calculation results in wrong value.
The patch addresses above described issue by traversing all the CPU
nodes to calculate the cpu index. Also, prevents inconsistent report
of /sys/devices/system/cpu/cpu*/cpufreq/* and
/sys/devices/system/cpu/cpuXX/acpi_cppc on each reboot.
TEST=Verified that the get_cpu_index helper function returns the correct
index id for a CPU on Rex.
The coreboot log with code instrumentation, before this patch:
[DEBUG] my_apic_id:0x10 cpu_index: 0x6
[DEBUG] my_apic_id:0x11 cpu_index: 0x6
[DEBUG] my_apic_id:0x42 cpu_index: 0x6
[DEBUG] my_apic_id:0x21 cpu_index: 0x6
[DEBUG] my_apic_id:0x40 cpu_index: 0x6
[DEBUG] my_apic_id:0x31 cpu_index: 0x6
[DEBUG] my_apic_id:0x39 cpu_index: 0x6
[DEBUG] my_apic_id:0xa cpu_index: 0x3
[DEBUG] my_apic_id:0x0 cpu_index: 0x0
[DEBUG] my_apic_id:0x8 cpu_index: 0x2
[DEBUG] my_apic_id:0x4 cpu_index: 0x2
[DEBUG] my_apic_id:0x28 cpu_index: 0x6
[DEBUG] my_apic_id:0x2 cpu_index: 0x1
[DEBUG] my_apic_id:0x38 cpu_index: 0x6
[DEBUG] my_apic_id:0x29 cpu_index: 0x6
[DEBUG] my_apic_id:0xe cpu_index: 0x5
[DEBUG] my_apic_id:0x6 cpu_index: 0x2
[DEBUG] my_apic_id:0x20 cpu_index: 0x6
[DEBUG] my_apic_id:0x30 cpu_index: 0x6
[DEBUG] my_apic_id:0x19 cpu_index: 0x6
[DEBUG] my_apic_id:0xc cpu_index: 0x4
[DEBUG] my_apic_id:0x18 cpu_index: 0x6
We can see same cpu_index for multiple cores before fix.
After this patch..
[DEBUG] my_apic_id:0x10 cpu_index: 0x8
[DEBUG] my_apic_id:019 cpu_index: 0xb
[DEBUG] my_apic_id:0x11 cpu_index: 0x9
[DEBUG] my_apic_id:0x18 cpu_index: 0xa
[DEBUG] my_apic_id:0x40 cpu_index: 0x14
[DEBUG] my_apic_id:0x30 cpu_index: 0x10
[DEBUG] my_apic_id:0x42 cpu_index: 0x15
[DEBUG] my_apic_id:0xc cpu_index: 0x6
[DEBUG] my_apic_id:0x2 cpu_index: 0x1
[DEBUG] my_apic_id:0x29 cpu_index: 0xf
[DEBUG] my_apic_id:0xe cpu_index: 0x7
[DEBUG] my_apic_id:0x20 cpu_index: 0xc
[DEBUG] my_apic_id:0x0 cpu_index: 0x0
[DEBUG] my_apic_id:0x31 cpu_index: 0x11
[DEBUG] my_apic_id:0x28 cpu_index: 0xe
[DEBUG] my_apic_id:0x21 cpu_index: 0xd
[DEBUG] my_apic_id:0xa cpu_index: 0x5
[DEBUG] my_apic_id:0x38 cpu_index: 0x12
[DEBUG] my_apic_id:0x8 cpu_index: 0x4
[DEBUG] my_apic_id:0x4 cpu_index: 0x2
[DEBUG] my_apic_id:0x39 cpu_index: 0x13
Change-Id: I69e5e6231dd18b43d439340aaed50eb9edeca3b7
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70751
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Sukumar Ghorai <sukumar.ghorai@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch makes the call into TXT lib in order to disable the TXT
if SoC user haven't selected the `INTEL_TXT` config. Disabling TXT
would be helpful to access VGA framebuffer prior calling into FSP-M.
TEST=Able to perform disable_txt and unlock memory which helped to
access VGA framebuffer prior calling into FSP-M.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I9dd7c5492a5f45eef0dd9e836cc2da1844c78919
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71575
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Add a function to disable TXT as per TXT BIOS spec Section 6.2.5. AP
firmware can disable TXT if TXT fails or TPM is already enabled.
On platforms with TXT disabled, the memory can be unlocked using
MSR 0x2e6.
TEST=Able to perform disable_txt on SoC SKUs with TXT enabled.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I27f613428e82a1dd924172eab853d2ce9c32b473
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71574
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Enable DPTC support for markarth.
BUG=b:263216451
TEST=emerge-skyrim coreboot
Change-Id: I18c2c840037f65f4f2ca92054247cece28843e45
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71720
Reviewed-by: Tim Van Patten <timvp@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Follow thermal table from thermal team.
1. Enable TS3 thermal sensor.
2. Set TS3 passive policy to 63.
3. Set TS3 critical policy to 73.
4. Modify TSR2 passive policy to CPU.
BUG=b:263554342
TEST=emerge-nissa coreboot chromeos-bootimage
Change-Id: Ia1fcaee15a8b58b755ce0a48a1978e795b66efd7
Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71658
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: AlanKY Lee <alanky_lee@compal.corp-partner.google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Add ACPI DmaProperty for gladios.
BUG=b:239513596
TEST=Verified SSDT on gladios unit.
Before:
Scope (\_SB.PCI0.RP01)
{
Device (RLTK)
{
Name (_HID, "R8168") // _HID: Hardware ID
Name (_UID, 0xD0E889DD) // _UID: Unique ID
Name (_DDN, "Realtek r8168") // _DDN: DOS Device Name
Name (_ADR, 0x00000000) // _ADR: Address
Name (_PRW, Package (0x02) // _PRW: Power Resources for Wake
{
0x07,
0x03
})
}
}
After:
Scope (\_SB.PCI0.RP01)
{
Device (RLTK)
{
Name (_HID, "R8168") // _HID: Hardware ID
Name (_UID, 0xD0E889DD) // _UID: Unique ID
Name (_DDN, "Realtek r8168") // _DDN: DOS Device Name
Name (_ADR, 0x00000000) // _ADR: Address
Name (_PRW, Package (0x02) // _PRW: Power Resources for Wake
{
0x07,
0x03
})
Name (_DSD, Package (0x02) // _DSD: Device-Specific Data
{
ToUUID ("70d24161-6dd5-4c9e-8070-705531292865"),
Package (0x01)
{
Package (0x02)
{
"DmaProperty",
One
}
}
})
}
}
Change-Id: I1c4f6ff7b3eda114f4f365a963c089fe584d8aee
Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71699
Reviewed-by: Kevin Chiu <kevin.chiu.17802@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
PRMRR is used by many Intel SOC features, not just Intel SGX.
As of now SGX and Key Locker are the features that need PRMRR.
Untie it from Intel SGX specific files and move to common cpulib.
Also rename PRMRR size config option. Use the renamed PRMRR size
config option to set the PRMRR size.
TEST=Able to set PRMRR size using config.
Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com>
Change-Id: I0cd49a87be0293530705802fd9b830201a5863c2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70819
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
This patch decouples useful TXT related operations from the romstage.c
file alone and moves them into a helper txtlib.c. This effort will be
helpful for SoC users to perform TXT related operations
(like Disabling TXT) even without selecting INTEL_TXT config.
At present, those helper functions are only available upon selecting
INTEL_TXT which is not getting enabled for most of the SoC platform in
the scope of the Chromebooks.
TEST=Able to access functions from txtlib.c even without selecting
INTEL_TXT config.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Iff5b4e705e18cbaf181b4c71bfed368c3ed047ed
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71573
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
Sometimes, server platforms may have more than one socket on server
board. However, there's no field to store information about which
socket the DIMM comes from in dimm_info structure.
This patch adds soc_num field in dimm_info structure to store socket
ID of the DIMM.
Signed-off-by: Tim Chu <Tim.Chu@quantatw.com>
Change-Id: I1b9e2b87fda2d7c32ecb8ce9d989795c8b869cea
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70662
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
|
|
Also disable TCO timer through calling tco_configure().
If tco_configure() is not called, the TCO timeout would
trigger SMI periodically about every 2 seconds with SMM log:
"TCO_STS: BIT18 TIMEOUT"
Tested=On AC CRB, does not see periodic SMI log.
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Change-Id: I2d307ad16109ae11862dd5e5acc0f12f47b22582
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71141
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
|
|
If cbmem_top is not 1M aligned there will be a hole between DPR base
and cbmem_top that the allocator will consider as unassigned memory.
Resources could incorrectly be assigned to that region and the final
MTRR solution will also try to skip that hole, therefore using a lot
more variable MTRRs than needed.
TESTED on Archer City 2S system: Uses 1 variable MTRR in the final
setup instead of 7.
Change-Id: I198f8d83bcfcdca3a770bd7f9a7060d5782a49fe
Signed-off-by: Arthur Heymans <arthur.heymans@9elements.com>
Signed-off-by: Jonathan Zhang <jonzhang@meta.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71142
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
|
|
values by macros
Macro definitions are from DMTF System Management BIOS (SMBIOS)
Reference Specification (DSP0134) Chapter 7.5.5.
Change-Id: Ifed1d773b0b349f878648b8172fd770a397e9686
Signed-off-by: Li, Jincheng <jincheng.li@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71633
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Software Connection Manager doesn't work with Linux 5.13 or later,
resulting in TBT ports timing out. Not advertising this results
in Firmware Connection Manager being used and TBT works
correctly.
Add Kconfig options to chose between SCM (Software Connection
Manager) and FCM (Firmware Connection Manager). FCM is primary, as
it's more compatible save for ChromeOS devices as ChromeOS uses
SCM.
Linux patch:
torvalds/linux@c6da62a
c6da62a219d028de10f2e22e93a34c7ee2b88d03
Tested with StarBook Mk VI (i7-1260P).
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Iac31d37c0873f41f7b14e1051fe214466d1ebdd8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64561
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
This patch adds the support to enable/disable package c-state demotion
feature from the devicetree based on mainboard requirement.
Port of commit 4be8d9e80deb ("soc/intel/adl: Add support to configure
package c-state demotion")
BUG=none
TEST=Boot to the OS on Google/Rex.
Snippet from FSP log:
[SPEW ] PkgCState Demotion : 0x1
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I0a4b0b181349ce41035524482add4336cf83a68b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71654
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This patch configures max Pkg C-state to Auto which limits the max
C-state to deep C-state.
Port of commit af42906efa72 ("soc/intel/alderlake: Set max Pkg C-states
to Auto")
BUG=none
TEST=Boot to the OS on Google/Rex.
Snippet from FSP log:
[SPEW ] PkgCStateLimit : 0xFF
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: Ic403ab83a594b04920d5cf600432939687a2598b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71653
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I2d5700534c07e89b3908a2e6b827db919a48795d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71591
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Because skyrim is loading ramstage from SPI with the DMA engine, the
size of the compressed image is less important to load speed than
decompression time.
Because the LZ4 decompression is so much faster than LZMA, compressing
with LZ4 saves us roughly 30ms in boot time.
For size, we're spending roughly 57KiB:
fallback/ramstage 0x9b00 stage 130864 LZMA (305316 decompressed)
fallback/ramstage 0x9b00 stage 189126 LZ4 (305316 decompressed)
Right now we have 2MiB empty space in Skyrim's RO before this change,
and roughly 550KiB empty space in RW, so there aren't currently any
size worries.
Just for fun, I also tested uncompressed ramstage, and it was still
18ms faster than LZMA, but that makes it roughly 12ms slower than LZ4.
BUG=b:264409477
TEST=Boot skyrim, look at boot speed.
Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Change-Id: Iedde6fc2db9d702c0ff2b0081e7baa254ac6699f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71675
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Previously, LZMA was included in romstage because it was almost always
needed to decompress ramstage. When compressing ramstage with LZ4, but
using LZMA compression for FSP-M, we still need the LZMA decompression
to be present, so update when the Makefile includes the LZMA decoder.
Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Change-Id: Id52d25a13420f05db8b2b563de0448f9d44638e0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71674
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
When ramstage is loaded asynchronously, as on the skyrim boards, the
faster decompression of LZ4 allows for faster boot times than the
tighter compression of LZMA.
To make this change, the name of the existing ramstage_compression
option needs to be updated.
BUG=b:264409477
TEST=Boot skyrim, look at boot speed
Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Change-Id: I27dd1a8def024e0efd466cef9ffd9ca71717486a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71673
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Create the dibbi variant of the waddledee reference board by
copying the template files to a new directory.
BUG=b:260934018
BRANCH=dedede
TEST=util/abuild/abuild -p none -t google/dedede -x -a includes
GOOGLE_DIBBI
Change-Id: I3b8d4e7f8a53323f56567cbbc03bab7f8804f286
Signed-off-by: Liam Flaherty <liamflaherty@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71709
Reviewed-by: Adam Mills <adamjmills@google.com>
Reviewed-by: Sam McNally <sammc@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add new ram_id:0000 for Micron MT62F1G32D2DS-026 WT:B.
Add new ram_id:0010 for Micron MT62F512M32D2DR-031 WT:B
The RAM ID table has been assigned as:
DRAM Part Name ID to assign
K3KL8L80CM-MGCT 0 (0000)
H58G56BK7BX068 0 (0000)
MT62F1G32D2DS-026 WT:B 0 (0000)
K3KL9L90CM-MGCT 1 (0001)
H58G66BK7BX067 1 (0001)
MT62F2G32D4DS-026 WT:B 1 (0001)
MT62F512M32D2DR-031 WT:B 2 (0010)
BUG=b:263296326, b:263216451
BRANCH=None
TEST=FW_NAME=markarth emerge-skyrim coreboot
Change-Id: I3a0d3edb813ef91bfdc68f7400be64fb679dfc04
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71619
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
|
|
Enable eNEM for all nissa variants. This is mostly done to be consistent
with other recent Intel platforms. It's not strictly necessary since on
nissa the LLC size is larger than the total code + data size used in
CAR. There is no change in boot time.
BUG=None
TEST=Boot to OS on craask
Change-Id: Iad48976e405403ab61c71d8f72e0616ea8b85ebd
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71707
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This bit is dropped in factory. All skus can use table ID_0.
BUG=b:251287101
TEST=build passed.
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: I4298376899f881dd2265aef5a0bbc5bcc46728a1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71690
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When EC_GOOGLE_CHROMEEC_INCLUDE_SSFC_IN_FW_CONFIG is enabled and
SSFC is not set, it will treat missing SSFC as zero, so Kano needs
to set the ov2740 to 0 to avoid probing wrong mipi camera.
Before patch
>fw_config match found: UFC=UFC_MIPI_OVTI2740
>fw_config match found: AUDIO=MAX98373_NAU88L25B_I2S
>fw_config match found: AUDIO=MAX98373_NAU88L25B_I2S
>fw_config match found: AUDIO=MAX98373_NAU88L25B_I2S
>fw_config match found: UFC=UFC_MIPI_OVTI2740
>fw_config match found: ZYDRON_UFC=UFC_MIPI_HI556
>fw_config match found: UFC=UFC_MIPI_OVTI2740
>fw_config match found: STYLUS=STYLUS_PRESENT
After patch
>fw_config match found: UFC=UFC_MIPI_OVTI2740
>fw_config match found: AUDIO=MAX98373_NAU88L25B_I2S
>fw_config match found: AUDIO=MAX98373_NAU88L25B_I2S
>fw_config match found: AUDIO=MAX98373_NAU88L25B_I2S
>fw_config match found: UFC=UFC_MIPI_OVTI2740
>I2C: 00:20 disabled by fw_config
>fw_config match found: UFC=UFC_MIPI_OVTI2740
>fw_config match found: STYLUS=STYLUS_PRESENT
BUG=b:262939431
TEST=Boot on kano and check functional with ov2740 camera.
Change-Id: I46fac6c820d6006956680a07198db82225630905
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71628
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This is support for adding legacy VGA support into romstage.
Support for this is being provided by libgfxinit.
The current use case allows us to initialize the display
before memory init (prior to physical memory init) to inform
the user when lengthy memory training is needed.
BUG=b:252792591
BRANCH=firmware-brya-14505.B
TEST=VGA code compiles for romstage
Change-Id: I81309871e8db71657b2a9816708141f121d767d3
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70278
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch disables the stage cache to save boot time.
Note: S3 is not POR for Intel MTL mobile skus.
Boot time is reduced by ~8ms.
Boot time before:
4:end of romstage 1,391,225 (13,724)
100:start of postcar 1,403,339 (12,114)
Boot time after:
4:end of romstage 1,380,262 (5,618)
100:start of postcar 1,392,323 (12,060)
Change-Id: I9775fc628f345a514894f30435a374e2ffa057c1
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71695
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
While pademelon may be a desktop board, it's not available for purchase,
which means it should be presented here as an eval board.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I5038935bb6f2ba530ea6e16ac84c1746efec8e48
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71580
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Remove smbios_mainboard_bios_version so that the default
CONFIG_LOCALVERSION can be used.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ia94f8683a54a98f4e3b1f51521db7e3ccb56ba48
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70855
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
The CR50 code clears the post code value. Add this as a #define.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: If3b73a3159ac8ac9ab08c6ff705b0ca289ab453c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71592
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
The patch addresses Intel heterogeneous cores as `Efficient` and
`Performance` cores instead of `small` and `big` cores. It is to ensure
coreboot code has uniform reference to the heterogeneous cores. So, the
patch renames all `small` and `big` core references to `efficient` (eff)
and `performance` (perf) cores respectively.
TEST=Build the code for Brya and Rex boards
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I98c9c0ed86b211d736a0a1738b47410faa13a39f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71639
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Add below mentioned functions:
is_sgx_configured_and_supported():
Checks if SGX is configured and supported
is_keylocker_configured_and_supported():
Checks if Key Locker is configured and supported
check_prm_features_enabled():
Checks if any of the features that need PRM are configured
and supported. As of now SGX and Key Locker are the only
features that need PRM.
Also, call check_prm_features_enabled() from get_valid_prmrr_size()
to make sure PRM dependent features are enabled and configured before
returning PRMRR size.
Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com>
Change-Id: I51d3c144c410ce4c736f10e3759c7b7603ec3de9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71569
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Add INTEL_KEYLOCKER Kconfig option. Disable it by default. The
specification of Key Locker can be found via document #343965
on Intel's site.
Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com>
Change-Id: Ia78e9bfe7ba2fd4e45b4821c95b19b8e580dccab
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71118
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
Fix:
cc1: error: src/mainboard/amd/mandolin/acpi: No such file or directory [-Werror=missing-include-dirs]
Change-Id: Ifbe6fda12088ddf51b6a177116aa542dbacc7672
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71255
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Fix:
cc1: error: src/mainboard/amd/bilby/acpi: No such file or directory [-Werror=missing-include-dirs]
Change-Id: Ie167cd362b55e38870d26a877d8181b2b07b8639
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71254
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Since GPIO IO-APIC IRQs are fixed in hardware (RO registers), this patch
allows MTL boards to dynamically assign PCI IRQs. This means not relying
on FSP defaults, which eliminates the problem of PCI IRQs interfering
with GPIO IRQs routed to the same IRQ, when both have selected IO-APIC
routing.
BUG=none
TEST=Build and boot to google/rex. Check dmesg and make sure that there
is no regression.
IO-APIC interrupts before:
1: IO-APIC 1-edge i8042
8: IO-APIC 8-edge rtc0
9: IO-APIC 9-fasteoi acpi
14: IO-APIC 14-fasteoi INTC1083:00
16: IO-APIC 16-fasteoi idma64.5, ttyS0, intel-ipu6
28: IO-APIC 28-fasteoi idma64.6, pxa2xx-spi.6
29: IO-APIC 29-fasteoi i2c_designware.3
30: IO-APIC 30-fasteoi i2c_designware.4
32: IO-APIC 32-fasteoi idma64.0, i2c_designware.0
33: IO-APIC 33-fasteoi idma64.1, i2c_designware.1
35: IO-APIC 35-fasteoi idma64.2, i2c_designware.2
88: IO-APIC 88-fasteoi ELAN0000:00
89: IO-APIC 89-fasteoi chromeos-ec
99: IO-APIC 99-edge cr50_i2c
106: IO-APIC 106-fasteoi chromeos-ec
IO-APIC interrupts after:
1: IO-APIC 1-edge i8042
8: IO-APIC 8-edge rtc0
9: IO-APIC 9-fasteoi acpi
14: IO-APIC 14-fasteoi INTC1083:00
16: IO-APIC 16-fasteoi intel-ipu6
20: IO-APIC 20-fasteoi idma64.5, ttyS0
27: IO-APIC 27-fasteoi idma64.0, i2c_designware.0
28: IO-APIC 28-fasteoi idma64.1, i2c_designware.1
30: IO-APIC 30-fasteoi idma64.2, i2c_designware.2
31: IO-APIC 31-fasteoi i2c_designware.3
32: IO-APIC 32-fasteoi i2c_designware.4
35: IO-APIC 35-fasteoi idma64.6, pxa2xx-spi.6
88: IO-APIC 88-fasteoi ELAN0000:00
89: IO-APIC 89-fasteoi chromeos-ec
99: IO-APIC 99-edge cr50_i2c
106: IO-APIC 106-fasteoi chromeos-ec
_PRT before:
Package (0x04) ==> 0x001FFFFF, Zero, Zero, 0x10
Package (0x04) ==> 0x001FFFFF, One, Zero, 0x11
Package (0x04) ==> 0x001FFFFF, 0x02, Zero, 0x12
Package (0x04) ==> 0x001FFFFF, 0x03, Zero, 0x13
Package (0x04) ==> 0x001EFFFF, Zero, Zero, 0x10
Package (0x04) ==> 0x001EFFFF, One, Zero, 0x11
Package (0x04) ==> 0x001EFFFF, 0x02, Zero, 0x1B
Package (0x04) ==> 0x001EFFFF, 0x03, Zero, 0x1C
Package (0x04) ==> 0x001CFFFF, Zero, Zero, 0x10
Package (0x04) ==> 0x001CFFFF, One, Zero, 0x11
Package (0x04) ==> 0x001CFFFF, 0x02, Zero, 0x12
Package (0x04) ==> 0x001CFFFF, 0x03, Zero, 0x13
Package (0x04) ==> 0x0019FFFF, Zero, Zero, 0x1D
Package (0x04) ==> 0x0019FFFF, One, Zero, 0x1E
Package (0x04) ==> 0x0019FFFF, 0x02, Zero, 0x1F
Package (0x04) ==> 0x0017FFFF, Zero, Zero, 0x10
Package (0x04) ==> 0x0016FFFF, Zero, Zero, 0x10
Package (0x04) ==> 0x0016FFFF, One, Zero, 0x11
Package (0x04) ==> 0x0016FFFF, 0x02, Zero, 0x12
Package (0x04) ==> 0x0016FFFF, 0x03, Zero, 0x13
Package (0x04) ==> 0x0015FFFF, Zero, Zero, 0x20
Package (0x04) ==> 0x0015FFFF, One, Zero, 0x21
Package (0x04) ==> 0x0015FFFF, 0x02, Zero, 0x22
Package (0x04) ==> 0x0015FFFF, 0x03, Zero, 0x23
Package (0x04) ==> 0x0014FFFF, Zero, Zero, 0x10
Package (0x04) ==> 0x0014FFFF, One, Zero, 0x11
Package (0x04) ==> 0x0014FFFF, 0x02, Zero, 0x12
Package (0x04) ==> 0x0012FFFF, Zero, Zero, 0x1A
Package (0x04) ==> 0x0012FFFF, One, Zero, 0x25
Package (0x04) ==> 0x0012FFFF, 0x02, Zero, 0x19
Package (0x04) ==> 0x0010FFFF, Zero, Zero, 0x17
Package (0x04) ==> 0x0010FFFF, One, Zero, 0x16
Package (0x04) ==> 0x000DFFFF, Zero, Zero, 0x10
Package (0x04) ==> 0x000DFFFF, One, Zero, 0x11
Package (0x04) ==> 0x000BFFFF, Zero, Zero, 0x10
Package (0x04) ==> 0x0008FFFF, Zero, Zero, 0x10
Package (0x04) ==> 0x0007FFFF, Zero, Zero, 0x10
Package (0x04) ==> 0x0007FFFF, One, Zero, 0x11
Package (0x04) ==> 0x0007FFFF, 0x02, Zero, 0x12
Package (0x04) ==> 0x0007FFFF, 0x03, Zero, 0x13
Package (0x04) ==> 0x0006FFFF, Zero, Zero, 0x10
Package (0x04) ==> 0x0006FFFF, One, Zero, 0x11
Package (0x04) ==> 0x0006FFFF, 0x02, Zero, 0x12
Package (0x04) ==> 0x0006FFFF, 0x03, Zero, 0x13
Package (0x04) ==> 0x0005FFFF, Zero, Zero, 0x10
Package (0x04) ==> 0x0004FFFF, Zero, Zero, 0x10
Package (0x04) ==> 0x0002FFFF, Zero, Zero, 0x10
Package (0x04) ==> 0x0001FFFF, Zero, Zero, 0x10
Package (0x04) ==> 0x0001FFFF, One, Zero, 0x11
Package (0x04) ==> 0x0001FFFF, 0x02, Zero, 0x12
Package (0x04) ==> 0x0001FFFF, 0x03, Zero, 0x13
_PRT after:
Package (0x04) ==> 0x0001FFFF, 0x00, 0x00, 0x00000010
Package (0x04) ==> 0x0002FFFF, 0x00, 0x00, 0x00000011
Package (0x04) ==> 0x0004FFFF, 0x00, 0x00, 0x00000012
Package (0x04) ==> 0x0005FFFF, 0x00, 0x00, 0x00000010
Package (0x04) ==> 0x0006FFFF, 0x00, 0x00, 0x00000010
Package (0x04) ==> 0x0006FFFF, 0x01, 0x00, 0x00000011
Package (0x04) ==> 0x0006FFFF, 0x02, 0x00, 0x00000012
Package (0x04) ==> 0x0007FFFF, 0x00, 0x00, 0x00000013
Package (0x04) ==> 0x0007FFFF, 0x01, 0x00, 0x00000014
Package (0x04) ==> 0x0007FFFF, 0x02, 0x00, 0x00000015
Package (0x04) ==> 0x0007FFFF, 0x03, 0x00, 0x00000016
Package (0x04) ==> 0x0008FFFF, 0x00, 0x00, 0x00000017
Package (0x04) ==> 0x000BFFFF, 0x00, 0x00, 0x00000013
Package (0x04) ==> 0x000DFFFF, 0x00, 0x00, 0x00000014
Package (0x04) ==> 0x000DFFFF, 0x01, 0x00, 0x00000015
Package (0x04) ==> 0x0010FFFF, 0x00, 0x00, 0x00000016
Package (0x04) ==> 0x0010FFFF, 0x01, 0x00, 0x00000017
Package (0x04) ==> 0x0012FFFF, 0x00, 0x00, 0x00000018
Package (0x04) ==> 0x0012FFFF, 0x01, 0x00, 0x00000019
Package (0x04) ==> 0x0012FFFF, 0x02, 0x00, 0x00000011
Package (0x04) ==> 0x0014FFFF, 0x01, 0x00, 0x00000012
Package (0x04) ==> 0x0014FFFF, 0x00, 0x00, 0x0000001A
Package (0x04) ==> 0x0014FFFF, 0x02, 0x00, 0x00000013
Package (0x04) ==> 0x0015FFFF, 0x00, 0x00, 0x0000001B
Package (0x04) ==> 0x0015FFFF, 0x01, 0x00, 0x0000001C
Package (0x04) ==> 0x0015FFFF, 0x02, 0x00, 0x0000001D
Package (0x04) ==> 0x0015FFFF, 0x03, 0x00, 0x0000001E
Package (0x04) ==> 0x0016FFFF, 0x00, 0x00, 0x00000014
Package (0x04) ==> 0x0016FFFF, 0x01, 0x00, 0x00000015
Package (0x04) ==> 0x0016FFFF, 0x02, 0x00, 0x00000016
Package (0x04) ==> 0x0016FFFF, 0x03, 0x00, 0x00000017
Package (0x04) ==> 0x0017FFFF, 0x00, 0x00, 0x00000010
Package (0x04) ==> 0x0019FFFF, 0x00, 0x00, 0x0000001F
Package (0x04) ==> 0x0019FFFF, 0x01, 0x00, 0x00000020
Package (0x04) ==> 0x0019FFFF, 0x02, 0x00, 0x00000021
Package (0x04) ==> 0x001CFFFF, 0x00, 0x00, 0x00000010
Package (0x04) ==> 0x001CFFFF, 0x01, 0x00, 0x00000011
Package (0x04) ==> 0x001CFFFF, 0x02, 0x00, 0x00000012
Package (0x04) ==> 0x001CFFFF, 0x03, 0x00, 0x00000013
Package (0x04) ==> 0x001EFFFF, 0x00, 0x00, 0x00000014
Package (0x04) ==> 0x001EFFFF, 0x01, 0x00, 0x00000015
Package (0x04) ==> 0x001EFFFF, 0x02, 0x00, 0x00000022
Package (0x04) ==> 0x001EFFFF, 0x03, 0x00, 0x00000023
Package (0x04) ==> 0x001FFFFF, 0x01, 0x00, 0x00000017
Package (0x04) ==> 0x001FFFFF, 0x02, 0x00, 0x00000014
Package (0x04) ==> 0x001FFFFF, 0x03, 0x00, 0x00000015
Package (0x04) ==> 0x001FFFFF, 0x00, 0x00, 0x00000016
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I013cd5faab6f425ab1af91fe2a36ac3b8aeef443
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71113
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This change sets DRIVER_TPM_I2C_BUS to the i2c 1 bus for TPM for the
omnigul variant.
BUG=b:263060849
TEST=FW_NAME=omnigul emerge-brya coreboot
Change-Id: I42528d73a4f83bd409cb4a1bd51f2e4e82ee7804
Signed-off-by: jamie_chen <jamie_chen@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71703
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
|
|
To support an RPL SKU on omnigul, omnigul must use the FSP for RPL.
Select SOC_INTEL_RAPTORLAKE for omnigul so that it will use the RPL
FSP headers for omnigul.
BUG=b:263060849
BRANCH=None
TEST=FW_NAME=omnigul emerge-brya intel-rplfsp
coreboot-private-files-baseboard-brya coreboot chromeos-bootimage
Change-Id: If3cfbaeff0472012cb8f30ed8fff3bf5cac23f85
Signed-off-by: jamie_chen <jamie_chen@compal.corp-partner.google.com>
Change-Id: I6a0afb04bea4940e13ea62c2cd0a09500b8b5335
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71702
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Modify NVMe clkreq pin to GPP_D7 from GPP_D6.The design change is for
commonality of GPIO settings. To reserve craask GPIO table and add
craaskneto/craaskino's NVMe GPIO setting. In the change, clkreq# will
be 2 and clksrc is still 1.
BUG=b:259211172
TEST=Verify on reworked craask DUT to boot up from NVMe.
Change-Id: If45c1a87144d5370b1ca2525295fb7947639362f
Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71170
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Although S3 is supported on nissa, only S0ix is used on user devices,
so we can ignore optimising the S3 resume time. Disable the stage
cache to save boot time at the cost on increasing the S3 resume time.
Boot time is reduced by ~6 ms. This is mostly from adding postcar to
the stage cache, which is slow since TSEG is not cached in romstage.
Adding ramstage and FSP-S take negligible time.
The S3 resume time is increased by ~89 ms total from loading and
decompressing ramstage and FSP-S.
Boot time before:
3:after RAM initialization 573,295 (931)
4:end of romstage 583,569 (10,274)
100:start of postcar 587,729 (4,160)
Boot time after:
3:after RAM initialization 571,527 (830)
4:end of romstage 575,712 (4,185)
100:start of postcar 579,866 (4,153)
S3 resume time before:
101:end of postcar 368,904 (0)
10:start of ramstage 369,165 (260)
971:loading FSP-S 385,742 (16,577)
30:device enumeration 407,105 (21,362)
S3 resume time after:
101:end of postcar 363,101 (0)
8:starting to load ramstage 363,101 (0)
15:starting LZMA decompress (ignore for x86) 382,802 (19,701)
16:finished LZMA decompress (ignore for x86) 431,620 (48,817)
9:finished loading ramstage 431,850 (230)
10:start of ramstage 431,927 (76)
971:loading FSP-S 448,357 (16,430)
17:starting LZ4 decompress (ignore for x86) 474,420 (26,062)
18:finished LZ4 decompress (ignore for x86) 474,627 (206)
BUG=b:247940538, b:192032803
TEST=Boot and S3 suspend/resume on craask
Change-Id: I8015dc0808ee19cac67c2a6573d52781c6120e8c
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71677
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
On recent Intel ChromeOS devices, although S3 is still supported, only
S0ix is used on user devices, so we don't care about optimising S3
resume time. Disabing the stage cache saves boot time at the cost of
increasing the S3 resume time. E.g. on nissa this reduces boot time by
6 ms and increases S3 resume time by 89 ms.
BUG=b:247940538, b:192032803
TEST=Build and boot on nissa with MAINBOARD_DISABLE_STAGE_CACHE
selected.
Change-Id: I243a401a112a12bb824c5447a8fecc99500f7739
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71676
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Use CPUID_STRUCT_EXTENDED_FEATURE_FLAGS macro to get extended CPU
capabilities flags using cpuid_ext inline function.
Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com>
Change-Id: If680ffff64e2e1dabded8c03c4042d349a11b635
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71646
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Configure GPIOs based on b/263534907#comment4 from EE.
BUG=b:263534907, b:263216451
BRANCH=None
TEST=FW_NAME=markarth emerge-skyrim coreboot
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Change-Id: I5346a4322a6538d69d3482948166cfb5bd182021
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71635
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Turn on the dxio_tx_vboost_enable for winterhold/whiterun in coreboot.
It needs to confirm the PCIe Signal Integrity after enabled.
BUG=b:259622787
BRANCH=none
TEST=confirm the setting has been set correspondingly with checking
the FSP log.
Signed-off-by: Chris.Wang <chris.wang@amd.corp-partner.google.com>
Change-Id: I6aad3d9118180d2ffdfba38abc80b175b6f103bd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71647
Reviewed-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
|
|
Set fingerprint control GPIO to NC by HW design.
BUG=b:264340020
BRANCH=firmware-brya-14505.B
TEST=emerge-brya coreboot chromeos-bootimage
Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com>
Change-Id: I304862f0dd201da100b89c79a473eb116fc8263e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71650
Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
|
|
Configure CPU PCIe RP and IOM per variant.
Change-Id: I9c38af42206497dbb9436e9f2b8aff46fa4d3fb9
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71558
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
|
|
Change-Id: I885cc00c8bfcfaaabb2ce2b0269172d8d7a88db5
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71583
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Create the omnigul variant of the brya0 reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0).
BUG=b:263060849
BRANCH=None
TEST=util/abuild/abuild -p none -t google/brya -x -a
make sure the build includes GOOGLE_OMNIGUL
Change-Id: I6b4123db9cb77dc050a81f1cb83ef10e2fbffe8d
Signed-off-by: jamie_chen <jamie_chen@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71640
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This reverts commit e45f70423e5da8509bae83aba84b08f8fc0f624e.
Reason for revert: Merged out of order, broke tree
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Change-Id: I38a7be6b94199d3a23e78114fb6708c535f241cc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71279
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
This reverts commit 96d9b756690839c17b307a93b8a1898bd1c02ff5.
Reason for revert: Merged out of order, broke tree
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Change-Id: Iac2d78f2d6c687f52dc720e8d8dcb5cf7a171c9d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71280
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This message is designed to reduce end-user confusion who may not
know what memory training is. It also provides a maximum time
estimation calibrated for brya devices.
BUG=b:252792591
BRANCH=firmware-brya-14505.B
TEST=New message observed on skolas
Change-Id: Ie71cd86746427789b3694d41224bf2c170af0f91
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70796
Reviewed-by: Anil Kumar K <anil.kumar.k@intel.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:252792591
BRANCH=firmware-brya-14505.B
TEST=On-screen text message seen during MRC training on skolas
with a few extra patches
Change-Id: I41c9cccb09dea52e2318f8f9ebeeda3697a7b513
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70304
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
BUG=none
TEST=Build and boot to google/taniks. Check dmesg and make sure that
there is no regression.
Also confirm that there is no change in ACPI _PRT and IO-APCI interrupt
assignment.
IO-APIC interrupts before and after this patch:
1: IO-APIC 1-edge i8042
8: IO-APIC 8-edge rtc0
9: IO-APIC 9-fasteoi acpi
14: IO-APIC 14-fasteoi INTC1055:00
23: IO-APIC 23-fasteoi idma64.5, ttyS0
37: IO-APIC 37-fasteoi idma64.0, i2c_designware.0
38: IO-APIC 38-fasteoi idma64.1, i2c_designware.1
40: IO-APIC 40-fasteoi idma64.2, i2c_designware.2
41: IO-APIC 41-fasteoi idma64.3, i2c_designware.3
42: IO-APIC 42-fasteoi idma64.4, i2c_designware.4
45: IO-APIC 45-fasteoi idma64.6, pxa2xx-spi.6
77: IO-APIC 77-edge cr50_i2c
100: IO-APIC 100-fasteoi ELAN0000:00
103: IO-APIC 103-fasteoi chromeos-ec
_PRT before and after this patch:
Package (0x04) ==> 0x0001FFFF, 0x00, 0x00, 0x00000010
Package (0x04) ==> 0x0002FFFF, 0x00, 0x00, 0x00000011
Package (0x04) ==> 0x0004FFFF, 0x00, 0x00, 0x00000012
Package (0x04) ==> 0x0005FFFF, 0x00, 0x00, 0x00000010
Package (0x04) ==> 0x0006FFFF, 0x00, 0x00, 0x00000010
Package (0x04) ==> 0x0006FFFF, 0x02, 0x00, 0x00000012
Package (0x04) ==> 0x0007FFFF, 0x00, 0x00, 0x00000013
Package (0x04) ==> 0x0007FFFF, 0x01, 0x00, 0x00000014
Package (0x04) ==> 0x0007FFFF, 0x02, 0x00, 0x00000015
Package (0x04) ==> 0x0007FFFF, 0x03, 0x00, 0x00000016
Package (0x04) ==> 0x0008FFFF, 0x00, 0x00, 0x00000017
Package (0x04) ==> 0x000DFFFF, 0x00, 0x00, 0x00000011
Package (0x04) ==> 0x000DFFFF, 0x01, 0x00, 0x00000013
Package (0x04) ==> 0x0010FFFF, 0x00, 0x00, 0x00000018
Package (0x04) ==> 0x0010FFFF, 0x01, 0x00, 0x00000019
Package (0x04) ==> 0x0010FFFF, 0x02, 0x00, 0x00000014
Package (0x04) ==> 0x0010FFFF, 0x03, 0x00, 0x00000015
Package (0x04) ==> 0x0011FFFF, 0x00, 0x00, 0x0000001A
Package (0x04) ==> 0x0011FFFF, 0x01, 0x00, 0x0000001B
Package (0x04) ==> 0x0011FFFF, 0x02, 0x00, 0x0000001C
Package (0x04) ==> 0x0011FFFF, 0x03, 0x00, 0x0000001D
Package (0x04) ==> 0x0012FFFF, 0x00, 0x00, 0x0000001E
Package (0x04) ==> 0x0012FFFF, 0x01, 0x00, 0x0000001F
Package (0x04) ==> 0x0012FFFF, 0x02, 0x00, 0x00000016
Package (0x04) ==> 0x0013FFFF, 0x00, 0x00, 0x00000020
Package (0x04) ==> 0x0013FFFF, 0x01, 0x00, 0x00000021
Package (0x04) ==> 0x0013FFFF, 0x02, 0x00, 0x00000022
Package (0x04) ==> 0x0013FFFF, 0x03, 0x00, 0x00000023
Package (0x04) ==> 0x0014FFFF, 0x01, 0x00, 0x00000017
Package (0x04) ==> 0x0014FFFF, 0x00, 0x00, 0x00000024
Package (0x04) ==> 0x0014FFFF, 0x02, 0x00, 0x00000011
Package (0x04) ==> 0x0015FFFF, 0x00, 0x00, 0x00000025
Package (0x04) ==> 0x0015FFFF, 0x01, 0x00, 0x00000026
Package (0x04) ==> 0x0015FFFF, 0x02, 0x00, 0x00000027
Package (0x04) ==> 0x0015FFFF, 0x03, 0x00, 0x00000028
Package (0x04) ==> 0x0016FFFF, 0x00, 0x00, 0x00000012
Package (0x04) ==> 0x0016FFFF, 0x01, 0x00, 0x00000013
Package (0x04) ==> 0x0016FFFF, 0x02, 0x00, 0x00000014
Package (0x04) ==> 0x0016FFFF, 0x03, 0x00, 0x00000015
Package (0x04) ==> 0x0017FFFF, 0x00, 0x00, 0x00000016
Package (0x04) ==> 0x0019FFFF, 0x00, 0x00, 0x00000029
Package (0x04) ==> 0x0019FFFF, 0x01, 0x00, 0x0000002A
Package (0x04) ==> 0x0019FFFF, 0x02, 0x00, 0x0000002B
Package (0x04) ==> 0x001CFFFF, 0x00, 0x00, 0x00000010
Package (0x04) ==> 0x001CFFFF, 0x01, 0x00, 0x00000011
Package (0x04) ==> 0x001CFFFF, 0x02, 0x00, 0x00000012
Package (0x04) ==> 0x001CFFFF, 0x03, 0x00, 0x00000013
Package (0x04) ==> 0x001DFFFF, 0x00, 0x00, 0x00000010
Package (0x04) ==> 0x001DFFFF, 0x01, 0x00, 0x00000011
Package (0x04) ==> 0x001DFFFF, 0x02, 0x00, 0x00000012
Package (0x04) ==> 0x001DFFFF, 0x03, 0x00, 0x00000013
Package (0x04) ==> 0x001EFFFF, 0x00, 0x00, 0x00000017
Package (0x04) ==> 0x001EFFFF, 0x01, 0x00, 0x00000014
Package (0x04) ==> 0x001EFFFF, 0x02, 0x00, 0x0000002C
Package (0x04) ==> 0x001EFFFF, 0x03, 0x00, 0x0000002D
Package (0x04) ==> 0x001FFFFF, 0x01, 0x00, 0x00000016
Package (0x04) ==> 0x001FFFFF, 0x02, 0x00, 0x00000017
Package (0x04) ==> 0x001FFFFF, 0x03, 0x00, 0x00000014
Package (0x04) ==> 0x001FFFFF, 0x00, 0x00, 0x00000015
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: Ib4fc850228b7ddbf84e2feb2433adff5e4002033
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71236
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Move specific enum ddr3_module_type to <device/dram/ddr3.h>.
Change-Id: I8fd7892dda26158a5bdd6cd4972c7859a252153e
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71547
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
