summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2016-11-10mainboard/google/pyro: Set PL1 override to 12000mWKevin Chiu
Pyro is using APL SoC SKU's with 6W TDP max. As Reef, the energy calculation is wrong with the current VR solution. Experiments show that SoC TDP max (6W) can be reached when RAPL PL1 is set to 12W. Therefore, we've inserted 12W override after reading the fused value (6W) so that the system can reach the right performance level. BUG=chrome-os-partner:58112 BRANCH=master TEST=emerge-pyro coreboot chromeos-bootimage Change-Id: I6de22d7b2d107f3d26ecfadd4e0904e68318e656 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/17335 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-10google/pyro: Tune i2c frequency to 400 KhzKevin Chiu
tune i2c devices clk for pyro: I2C0: audio da7219 I2C2: TPM H1 I2C3: wacom touchscreen I2C4: elan touchpad BUG=chrome-os-partner:58881 BRANCH=master TEST=emerge-pyro coreboot chromeos-bootimage Change-Id: If3c92ed260277c27a94d2fcf7883e9441519e40e Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/17331 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-10google/pyro: update timing of sdmode togglingKevin Chiu
Maxim98357a speaker amp requires BCLK & SFRM to be active and stable before it is unmuted. If there is a BLCK and no SFRM, it results in a pop sound. sdmode_delay property already exists which facilitates this configuration. This patch updates "sdmode_delay" to avoid pop sound. BUG=chrome-os-partner:58112 BRANCH=master TEST=emerge-pyro coreboot chromeos-bootimage Change-Id: I5aee41957c9de7a05f962d3ede74efc6998a78fc Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/17336 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-10mainboard/google/pyro: Configure PERST pinKevin Chiu
Configure GPIO 122 as PERST. This is to assert WiFi PERST during s0ix entry. BUG=chrome-os-partner:58112 BRANCH=master TEST=emerge-pyro coreboot chromeos-bootimage Change-Id: Id760251a1b037feb62ec43199a145e407b074769 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/17334 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-10mainboard/kontron/ktqm77: transition away from device_tAntonello Dettori
Replace the use of the old device_t definition inside mainboard/kontron/ktqm77. Change-Id: I47763d1e2bfeee6366ce24b20d874adf7c6f65be Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/17299 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-11-10antirollback: Sync TPM space indices with vboot libraryFurquan Shaikh
BUG=chrome-os-partner:59355 BRANCH=None TEST=Compiles successfully for reef. Change-Id: I27f2e10556214598d479e4a84e8949465e7da7d6 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17272 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-10TPM: Add TPM driver files to romstageFurquan Shaikh
This driver is required for reading and updating TPM space for recovery MRC data hash in romstage. BUG=chrome-os-partner:59355 BRANCH=None TEST=Compiles successfully for reef. Change-Id: I8edb7af13285a7a192e3d55fc6a11cfe12654bf9 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17270 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-11-10mainboard/google/reef: Add support for RECOVERY_MRC_CACHEFurquan Shaikh
1. Add RECOVERY_MRC_CACHE region to reef FMAP. 2. Implement helper function for getting event for recovery mode with memory retraining. 3. Select HAS_RECOVERY_MRC_CACHE. BUG=chrome-os-partner:59352 BRANCH=None TEST=Verified recovery mode behavior with and without memory training request on reef. Change-Id: I91abc9f8122f1aa3980c6372ab557e56a7a92730 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17243 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-10mrc: Add support for separate training cache in recovery modeFurquan Shaikh
1. Re-factor MRC cache driver to properly select RW_MRC_CACHE or RECOVERY_MRC_CACHE based on the boot mode. - If normal mode boot, use RW_MRC_CACHE, if available. - If recovery mode boot: - Retrain memory if RECOVERY_MRC_CACHE not present, or recovery is requested explicity with retrain memory request. - Use RECOVERY_MRC_CACHE otherwise. 2. Protect RW and RECOVERY mrc caches in recovery and non-recovery boot modes. Check if both are present under one unified region and protect that region as a whole. Else try protecting individual regions. 3. Update training data in appropriate cache: - Use RW_MRC_CACHE if normal mode. - Use RECOVERY_MRC_CACHE if present in recovery mode. Else use RW_MRC_CACHE. 4. Add proper debug logs to indicate which training data cache is used at any point. BUG=chrome-os-partner:59352 BRANCH=None TEST=Verified that correct cache is used in both normal and recovery mode on reef. Change-Id: Ie79737a1450bd1ff71543e44a5a3e16950e70fb3 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17242 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-10vboot: Add support for recovery mode with forced memory retrainingFurquan Shaikh
1. Add new function vboot_recovery_mode_memory_retrain that indicates if recovery mode requires memory retraining to be performed. 2. Add helper function get_recovery_mode_retrain_switch to read memory retrain switch. This is provided as weak function which should be implemented by mainboard just like {get,clear}_recovery_mode_switch. BUG=chrome-os-partner:59352 BRANCH=None TEST=Verified behavior of recovery mode with forced memory retraining on reef Change-Id: I46c10fbf25bc100d9f562c36da3ac646c9dae7d1 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17241 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-10southbridge/amd: Remove debug echo when building PIMartin Roth
If this information is needed, use make V=1. That will print the actual command, not a command that needs to be updated with every addition if it's going to stay in sync. Change-Id: I64d33d93c7fad3359d8ef78657bdb86d1fb4d4a1 Signed-off-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://review.coreboot.org/17328 Tested-by: build bot (Jenkins) Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2016-11-10southbridge/amd: update for amdfwtool size on command lineMartin Roth
amdfwtool was getting the ROM size as a #define when it was built. It has been updated to pass it in as a command line parameter, so now it can be built just once for abuild as a shared tool. Update the calls to amdfwtool to pass the ROM size. All platforms using amdfwtool had the output verified using a binary compare. This reverts commit 0529236ed22f1a28d29f2054674004c4f7a056e7 (Makefile.inc: Don't share amdfwtool between platforms) Change-Id: I188b34e08249f2d00bd48957ced750b21f1ec348 Signed-off-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://review.coreboot.org/17327 Tested-by: build bot (Jenkins) Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2016-11-10Revert "vboot: Add vboot library to romstage"Furquan Shaikh
This reverts commit 21fdd8d0b2206be85dd920e94fb9657a22ab5226. I meant to abandon the original change and clicked submit instead. Change-Id: I1db29b62c5c071113d308583f094f77285c9ba1e Reviewed-on: https://review.coreboot.org/17346 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-10vboot: Add vboot library to romstageFurquan Shaikh
This library is needed for calculating sha-256 of recovery mrc data in romstage. BUG=chrome-os-partner:59355 BRANCH=None TEST=Compiles succesfully for reef. Change-Id: Ie257208c7b3ad07d00e4eb777debf19c42a2fc0c Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17271 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-10google/chromeec: Sync ec_commands.h host events with ec codebaseFurquan Shaikh
BUG=chrome-os-partner:59352 BRANCH=None TEST=Compiles successfully for reef Change-Id: Ibfa5681e16a97e342633104d2aae1fb0402939b8 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17240 Tested-by: build bot (Jenkins) Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-11-10mainboard/kontron/986lcd-m: transition away from device_tAntonello Dettori
Replace the use of the old device_t definition inside mainboard/kontron/986lcd-m. Change-Id: Ib47a4bb3580cb72ee51fb06c6faa6d2d1bd3a80c Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/17298 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-09southbridge/intel/i82801dx: transition away from device_tAntonello Dettori
Replace the use of the old device_t definition inside southbridge/intel/i82801dx. Change-Id: I32888930d3742432a73dfc0a32c6586186e6757c Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/17297 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-09mainboard/jetway/j7f2: transition away from device_tAntonello Dettori
Replace the use of the old device_t definition inside mainboard/jetway/j7f2. Change-Id: I37f59f74ac22fbf6e036cdb0515301e8dec400fb Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/17296 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-09mainboard/iei/pm-lx2-800-r10: transition away from device_tAntonello Dettori
Replace the use of the old device_t definition inside mainboard/iei/pm-lx2-800-r10. Change-Id: I60e5b84141aa4998427c3ecaadf8fce1654b8210 Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/17295 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-09mainboard/ibase/mb899: transition away from device_tAntonello Dettori
Replace the use of the old device_t definition inside mainboard/ibase/mb899. Change-Id: Id5b460090db58e91b2c210d8633a69114a9c7f6b Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/17294 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-09mainboard/getac/p470: transition away from device_tAntonello Dettori
Replace the use of the old device_t definition inside mainboard/getac/p470. Change-Id: Ifb81976ed7068f9d51edb0d297cd4a12265c51ec Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/17293 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-09soc/intel/skylake: fix memory access beyond array boundsRizwan Qureshi
chip.h has a config array PcieRpClkReqNumber which corresponds to a FSP UPD parameter, the size is currently set to 20. However the size of PcieRpClkReqNumber UPD in FSP2.0 is 24, so memcpy (config buffer to UPD buffer) in chip_fsp20.c will read beyond the bounds of config array. Hence set the size of PcieRpClkReqNumber array based on the FSP in use. Found-by: Coverity Scan #1365385, #1365386 Change-Id: I937f68ef33f218cd7f9ba5cf3baaec162bca3fc8 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/17292 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-09amd/cpu: Add details to chip namesMarshall Dawson
Newer AMD families have multiple models within them, each often requiring unique support. The chip_name files were starting to have a lot of duplication. Specify the model in the name, as well as the family. Change-Id: I236b260e2a565e212c486347c4a633eadcdf0042 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/17187 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-09nb/amd/amdmct/mct: Remove commented codeElyes HAOUAS
Change-Id: Id0c62cebfceaf083f1bb39514b06b32c55128b85 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/17172 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-09mainboard/roda: Use C89 comments style & remove commented codeElyes HAOUAS
Change-Id: I4ce2705a8a07d0388bbdb459b63b59fc10a3aa39 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16929 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-09nb/intel/i945/early_init.c: Add DDR2-667 detection for 945GCElyes HAOUAS
945G-M4 returns : "unknown max. RAM clock (2)", however, it supports up to DDR2-667MHz. i945/raminit.c sdram_capabilities_max_supported_memory_frequency() function returns 667 for case 2. Change-Id: I3d54c88af897a71db757d00288f3968ed2c19151 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/17191 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-09cpu/intel: Add MSR to support enabling turbo frequencyShaunak Saha
This patch adds definition FREQ_LIMIT_RATIO MSR. FREQ_LIMIT_RATIO register allows to determine the ratio limits to be used to limit frequency. BUG=chrome-os-partner:58158 BRANCH=None Change-Id: I50a792accbaab1bff313fd00574814d7dbba1f6b Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/17211 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-09AMD binaryPI: Delay ACPI S3 backup until ramstage loaderKyösti Mälkki
Change-Id: I482cf93fe5dfab95817c87c32aad33df2e0a6439 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15471 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-09AGESA: Delay ACPI S3 backup until ramstage loaderKyösti Mälkki
Change-Id: I59773161f22c1ec6a52050245f9ad3e6cc74a934 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15470 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-09ACPI S3: Remove HIGH_MEMORY_SAVE where possibleKyösti Mälkki
Add implementation to use actual requirements of ramstage size for S3 resume backup in CBMEM. The backup covers complete pages of 4 KiB. Only the required amount of low memory is backed up when ACPI_TINY_LOWMEM_BACKUP is selected for the platform. Enable this option for AGESA and binaryPI, other platforms (without RELOCATABLE_RAMSTAGE) currently keep their romstage ramstack in low memory for s3 resume path. Change-Id: Ide7ce013f3727c2928cdb00fbcc7e7e84e859ff1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15255 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2016-11-09mainboard/google/reef: use common google smbios mainboard versionAaron Durbin
BUG=chromium:663243 Change-Id: Ic78a6aac11a8e842911245c59e8ced7ed2c4e27a Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17291 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-09vendorcode/google: add common smbios mainboard version supportAaron Durbin
Provide an option to deliver the mainboard smbios version in the form of 'rev%d' based on the board_id() value. BUG=chromium:663243 Change-Id: If0a34935f570612da6e0c950fd7e8f0d92b6984f Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17290 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2016-11-09string.h: only guard snprintf() with __ROMCC__Aaron Durbin
There's no need to keep the snprintf() declaration hidden for early stages. romcc is the entity that has issues. Therefore, be explicit about when to guard snprintf(). BUG=chromium:663243 Change-Id: Ib4d0879e52c3f73c6ca61ab75f672f0003fca71f Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17289 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-09google/pyro: Update WACOM touchscreen ACPI _HIDJanice Li
WACOM request to add a new identifier `WCOMNTN2`, and use that for the board Pyro with all LCD combinations. BRANCH=master BUG=chrome-os-partner:58093 TEST=emerge-pyro vboot_reference coreboot chromeos-bootimage Signed-off-by: Janice Li <janice.li@quantatw.com> Change-Id: I95cf357efba958d7e864d2736d324e0aad70e307 Reviewed-on: https://review.coreboot.org/17257 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-09ec/acpi: Include ec.c unconditionally in romstageNico Huber
Dependencies on EC code should be specified at board level and not here. We can include the file unconditionally in romstage and let the linker decide if it's needed. Change-Id: Ie2d1970ac1dd175a9d42651573a88cd866f19cb9 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/17123 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-09Move select UDELAY_LAPIC from nb/gm45/Kconfig to cpu/model_1067x/KconfigArthur Heymans
Change-Id: I51cf4f35bf2ea95c8c19ab885e6308535314b0af Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17153 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-09nb/intel/gm45: Use LAPIC udelay instead of custom versionArthur Heymans
This change may slow down the raminit by maximum 200usec, but reuses the lapic udelay definition. Change-Id: I60a68f8a7911b257c0eecda96f7c5bf302bb51ed Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17152 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-08mb/lenovo/t400: use socket mPGA478MN instead of BGA945Arthur Heymans
The T400 features a socket P (mPGA478MN) and could potentially support model_6fx CPUs. Change-Id: I24f3356aa213c29011953daed31f46404e7a4d9d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17155 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-08cpu/intel/socket_mPGA478MN: Add socket PArthur Heymans
This mobile CPU socket supports model_6fx and model_1067x. Change-Id: Iecd6aae22831de7c3810545f0cb0be9738f96a2d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17154 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2016-11-08mb/gigabyte/ga-945gcm-s2l: add mainboardArthur Heymans
Startpoint was Intel d945gclf, which has same chipset and Gigabyte ga-g41m-es2l which has same Superio. What works and is tested: * PCI slot; * PCIe x16 slot with GPU (RADEON HD 2600 XT) and ADD2 DVI card; * onboard VGA output (only textmode implemented) with native graphic init; * 533, 800, 1067MHz FSB CPU (1333MHz is unsupported by the chipset); * serial output during and after boot. What does not work: * resume from suspend (does not work for d945gclf either). Quirks: * The Realtek ethernet card requires a reset which currently also hardcodes a MAC adress. This board was only tested with the SeaBIOS payload due to flash size constraints (512KB) and with GNU/Linux. Change-Id: I0ff9f193105facc1b276a791790e27eb4c275085 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17033 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-08soc/intel/apollolake: Provide chipset value for ifdtoolAndrey Petrov
Change-Id: I99454a9fca3b677a389bcaf7693ff4e18415c9ad Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/17259 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-08southbridge/intel: Set chipset in ifdtool invocationsAndrey Petrov
Since IFD format is floating, ifdtool needs to be parameterized with a chipset it is dealing with. Add -p <chipset> argument to ifdtool invocations if chipset provides it. Change-Id: I4fd1783b5d994617912aedcf17adc2a98c97227b Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/17258 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-08nb/x4x/raminit.c: Improve crossclock table cosmeticsArthur Heymans
Change-Id: I3f692c55fdff99aa9eb41eaaea79a41ac93be590 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17170 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-08vboot: Wrap line in comment longer than 80 charactersNaresh G Solanki
Fix comment greater than 80 columns. Change-Id: Ie0be96868e8a99f79781c6bafc8991a955f37ffa Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/17265 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-08intel/kblrvp: Update mainboard configurationNaresh G Solanki
Update devicetree.cb as per RVP3 mainboard. * Enable & configure PCIE ports, * Enable & configure USB ports, * Enable SSIC for WWAN, * Disable unused I2C ports, * Disable deep S5, * Disable HDA, * Update VR config, Updated gpio.h to disable pull down for SoC power button. Change-Id: I235a1d44dabef16ded2aaad13aef36ca57f37c8e Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/17247 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-08intel/e7501: Remove unused northbridge codeKyösti Mälkki
No boards left in the tree for this northbridge. Change-Id: Id45da11b9d78cbd6bd50acb5a3c6c3c270f9020e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17281 Tested-by: build bot (Jenkins) Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-08intel post-car: Split legacy socketsKyösti Mälkki
Move old sockets to use romstage_legacy.c, these are ones using intel/car/cache_as_ram.inc. These will not be converted to RELOCATABLE_RAMSTAGE as boards are candidates for getting dropped from the tree anyways. Change-Id: I2616b4edee53446f1875711291e9dfed2911e2fb Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17280 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-08quick_ram_check: Remove reference to RAMBASEKyösti Mälkki
Change-Id: Ieb8f11690fb0e9b287d866be56010bb9adefd21d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15239 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-08intel car: Remove references to DCACHE_RAM_ROMSTACK_SIZEKyösti Mälkki
Not referenced in code. Change-Id: Iea91f4418eb122fb647ec0f4f42cb786e8eadf23 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17268 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-07mainboard/intel/kblrvp: Remove unused code in dptf.aslNaresh G Solanki
Remove unused code from dptf.asl Change-Id: Icaa675fd1052367457d6e50d51d567e7db02fd42 Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/17249 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-07mainboard/intel/kblrvp: Configure usb over current pin & cdclockNaresh G Solanki
Configure overcurrent pins for various usb ports. Configure CdClock to 3. Change-Id: I57f1feb7e03c5bc7b125ea7e0735481fee91b6f6 Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/17251 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-07mainboard/intel/kblrvp: Enable Build with ChromeOSNaresh G Solanki
Enable building with ChromeOS support. Change-Id: I9fbb7422be205b304253478a70e334a63afab71f Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/17250 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-07mainboard/intel/kblrvp: Add Chrome EC switchNaresh G Solanki
Add Chrome EC switch to enable building with/without Chrome EC. Change-Id: Iaa8102cba0a454a24149d29f044a2284cd29e28b Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/17248 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-07intel/kunimitsu: Update DPTF settingsSumeet Pawnikar
After tuning the temperature values for optimal performance, this patch updates few DPTF settings for Kunimitsu board. BUG=None BRANCH=None TEST=Built and booted on Kunimitsu boards. Verified these updated DPTF settings with different workloads. Change-Id: Ic1c319262d80cc5cb29a8630af213822308f8bed Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://chromium-review.googlesource.com/350223 Reviewed-on: https://review.coreboot.org/17069 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-07google/lars: Update DPTF settingsSumeet Pawnikar
After tuning the temperature values for optimal performance, this patch updates few DPTF settings for lars boards. BUG=chrome-os-partner:51025 BRANCH=firmware-glados-7820.B TEST=Built and booted on lars DVT boards. Verified these updated DPTF settings with different workloads. Change-Id: I4c040526c31c3263ed3a9b4cccff3b7a021cfcdb Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://chromium-review.googlesource.com/338877 Reviewed-on: https://review.coreboot.org/17068 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-07soc/intel/skylake: Add _ACx methods for TSR0 sensor for fan controlSumeet Pawnikar
This patch updates below info, [1] Delete the DPTF_CPU_ACTIVE_AC* values because these are not being used. Hence, removing unnecessary defines. [2] Add new DPTF_TSR0_ACTIVE_AC* temperature trip points for TSR0 external thermal sensor. These trip points are being used by _ACx methods to control the fan speed on Skylake-U fan based Lars and Kunimitsu platforms. [3] Follow up patches are using DPTF_CPU_ACTIVE_AC* temperature trip points in board specific acpi/dptf.asl (for lars, kunimitsu, etc) to control the fan speed as per the CPU temperature trip points. [4] Newly added _ACx methods for thermal sensor TSR0 in this patch has nothing to do with DPTF_CPU_ACTIVE_AC*. We can control fan speed using various different thermal sensors. In this patch, we have added new _ACx methods for TSR0 thermal sensor. We run the fan at different speeds to cool down the system at different TSR0 temperatures. Similarly, we considered CPU sensor temperature values and ran the fan at different speeds to cool down the system. BUG=chrome-os-partner:51025 BRANCH=firmware-glados-7820.B TEST=Built and booted on kunimitsu and lars EVT boards. Verified these _ACx methods with _ART table on these boards with different workloads. Change-Id: Ia7b81e03da936c4a0f69057e43f18efd7c3b9f17 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://chromium-review.googlesource.com/332368 Reviewed-on: https://review.coreboot.org/17067 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-07lpss_i2c: Increase transaction timeoutDuncan Laurie
When doing long transcations on an I2C bus at standard speed we saw that long transactions could go over the 4ms limit while waiting for it to complete on the bus. Increase this so we can use standard speed for testing and debug in firmware. (as there is no way to force standard speed in the kernel) BUG=chrome-os-partner:58666 TEST=boot eve board with cr50 TPM and I2C bus at 100khz Change-Id: I2987ae6a5aa024b373eb088767194c70b0918b6f Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/17213 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-07soc/intel/{sky,apollo}lake: Wait until GPE is clear when readingDuncan Laurie
When reading+clearing a GPE for use as an interrupt we need to re-read the status register and keep setting the clear bit until it actually reads back clear. Also add a 1ms timeout in case the status never clears. This is needed if a device sends a longer interrupt pulse and it is still asserted when the "ISR" goes to clear the status. BUG=chrome-os-partner:59299 TEST=test cr50 TPM with 20us pulse to ensure it can successfully communicate with the TPM and does not get confused due to seeing interrupts that it should not. Change-Id: I384f484a1728038d3a355586146deee089b22dd9 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/17212 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-07drivers/i2c/tpm/cr50: Increase IRQ timeoutDuncan Laurie
Increase the IRQ timeout to prevent issues if there is a delay in the TPM responding to a command. Split the no-IRQ case out so it doesn't suffer unnecessarily. BUG=chrome-os-partner:59191 TEST=suspend/resume testing on eve board Change-Id: I1ea7859bc7a056a450b2b0ee32153ae43ee8699f Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/17204 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-07southbridge/amd: Update Kconfig and makefiles for 00670F00Marc Jones
Add Stoney specific code subtree and fix Makefles and Kconfig files. Author: Charles Marslett <charles@scarlettechnologies.com> Original-Signed-off-by: Marc Jones <marcj303@gmail.com> Original-Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Original-Tested-by: Marshall Dawson <marshalldawson3rd@gmail.com> (cherry picked from commit c3a469d11e4676b3b63d11a30955113291d00ec8) Change-Id: Ic4d97a3745f7fc5a637ae6da17a9009b9757136e Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/17217 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-07amd/pi/hudson: Move audio to northbridgeMarshall Dawson
Carrizo (00660F01), Merlin Falcon (00660F01), and Stoney Ridge (00670F00) locate the HD audio controller on the northbridge root complex at 9.2 instead of the FCH. This duplicates the existing ASL into the northbridge directories and reports the correct address. Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Original-Reviewed-by: Marc Jones <marcj303@gmail.com> (cherry picked from commit f68206c2b42c90076efd968a99f4d3a49e403438) Change-Id: I6d42bb40ad58c7f35e8c88ff27ebd327d656c021 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/17216 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-07vendorcode/amd: Update Kconfig and makefiles for 00670F00Marc Jones
Add Stoney specific code subtree and fix Makefles and Kconfig files. Original-Author: Charles Marslett <charles@scarlettechnologies.com> Original-Signed-off-by: Marc Jones <marcj303@gmail.com> Original-Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Original-Tested-by: Marshall Dawson <marshalldawson3rd@gmail.com> (cherry picked from commit 51a187a3d08a425ef0cc141a7ddc49a70ac931b1) Change-Id: I13c6b08c780e7bd2abd0fabbde1a89686132f65c Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/17196 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-07vendorcode/amd: Modify 0067F00 for binaryPIMarshall Dawson
Make changes to the vendorcode files that allow them to work with the binaryPI. This fixes various compile issues and establishes a common calling convention between coreboot and AGESA. Original-Signed-off-by: Marc Jones <marcj303@gmail.com> Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> (cherry picked from commit f7ea2785d70bd6813b5b4d315b064802251d9557) Change-Id: Ie36228476a9dbd7b83f95828ca9c7252cecd8ec8 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/17195 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-07vendorcode/amd: Copy 00670F00 files from PI packageMarshall Dawson
Make exact copies of the AGESA files from the Stoney PI package replacing existing versions. Change the license text and fix up misc. whitespace. This will facilitate the review of binaryPI changes in the vendorcode directory. Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Original-Reviewed-by: Marc Jones <marcj303@gmail.com> (cherry picked from commit 1097249585ab76fab59dcfbf8e7a419f34fcfcb6) Change-Id: I9951df58aeab2d533efc0a837ce35f343ff28d7c Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/17194 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-07vendorcode/amd: Copy 00660F01 directory to 00670F00Marc Jones
Prepare for new 00670FF00 support. Original-Signed-off-by: Marc Jones <marcj303@gmail.com> Original-Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Original-Tested-by: Marshall Dawson <marshalldawson3rd@gmail.com> (cherry picked from commit ca53cac5c847c55e56ad6f5feb382c04f33ae77a) Change-Id: Ib48b1611bf70ec302c50f6e07bd2b3d9b09e0a24 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/17193 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-07arch/x86/acpigen: Add OperationRegion & Field methodNaresh G Solanki
Add acpigen_write_opregion that generates ACPI AML code for OperationRegion, region name, region space, region length & region size are inputs. Add acpigen_write_field that generates ACPI AML code for Field. Operation region name & field list are inputs. Change-Id: I578834217d39aa3b0d409eb8ba4b5f7a31969fa8 Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/17113 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2016-11-07pci_ids.h: Correct recent AMD ID namesMarshall Dawson
Adjust the names to match AMD's convention for family and model. This patch is relevant for: Trinity & Richland: Family 15h Models 00h-0Fh Carrizo: Family 15h Models 60h-6Fh Mullins & Steppe Eagle: Family 16h Models 30h-3Fh Change-Id: I613b84ed438fb70269d789c9901f1928b5500757 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/17169 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: Martin Roth <martinroth@google.com>
2016-11-07mainboard/google/reef: update DMIC related pins configurationSathyanarayana Nujella
CLK_B1(GPIO_80) and DATA_2(GPIO_83) pins needs to be configured as native mode to use them for DMIC record on other potential DMIC's. DMIC blobs configure the clocks. For stereo & quad channel record, both CLK_A1 and CLK_B1 are enabled. For mono channel record, only CLK_A1 is enabled. BUG=chrome-os-partner:56918 BRANCH=None TEST=During DMIC record, check CLK_B1 and DATA_2 lines Change-Id: I838009b85190de5360d593238e48c9593c1dc43a Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-on: https://review.coreboot.org/17199 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-07soc/intel/apollolake: Add pmc_ipc device supportLijian Zhao
A dedicated pmc_ipc DSDT entry is required for pmc_ipc kernel driver. The ACPI mode entry includes resources for PMC_IPC1, SRAM, ACPI IO and Punit Mailbox. BRANCH=None BUG=chrome-os-partner:57364 TEST=Boot up into OS successfully and check with dmesg to see the driver has been loaded successfully without errors. Change-Id: Ib0a300febe1e7fc1796bfeca1a04493f932640e1 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/17181 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-11-07soc/intel/skylake: Fix SATA booting to OS issueSubrata Banik
SATA device remains unrecognized if connected at Port 2. Port control and Status register (PCS) is by default set by hardware to the disabled state as a result of an initial power on reset. OS read PCS register during boot causes disabling of SATA ports and can't detect any devices. BRANCH=none BUG=chrome-os-partner:59335 TEST=Build and boot SKL from SATA device connected at Port 2. Change-Id: I4866ca44567f5024edaca2d48098af5b4c67a7ac Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/17229 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-07vboot: Disable vboot verification when Chrome EC disabledNaresh G Solanki
When Chrome EC is disabled, vboot hash is not available during S3 resume Hence disable vboot verification when Chrome EC is not available. Change-Id: I665f5f0e2e53da7b735de30443d323572d8a1a9c Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/17246 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-07soc/intel/skylake: Avoid use of variable Local0 in TEVT in thermal.aslNaresh G Solanki
Avoid use of Local0 variable in TEVT acpi method. If mainboard doesn't expose any thermal sensor, then warning is generated for variable Local0 not been used. Change-Id: I0634961a01144e41a8480c8c6ed8b7fdd358e768 Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/17245 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-07soc/intel/skylake: Add device id for PCH-YNaresh G Solanki
Add device id for PCH-Y used in Kaby Lake RVP3 board. Change-Id: I9235265cf88e4d044e7216f53e6da7021fb68238 Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/17244 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-07riscv: Unify SBI call implementations under arch/riscv/Jonathan Neuschäfer
Note that currently, traps are only handled by the trap handler installed in the bootblock. The romstage and ramstage don't override it. TEST=Booted emulation/spike-qemu and lowrisc/nexys4ddr with a linux payload. It worked as much as before (Linux didn't boot, but it made some successful SBI calls) Change-Id: Icce96ab3f41ae0f34bd86e30f9ff17c30317854e Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/17057 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-11-07mb/lowrisc/nexys4ddr: Actually fix the UART clock setupJonathan Neuschäfer
Ron's code calculated the DLL and DLM registers of the 8250 UART, but that's the job of the UART driver. uart_input_clock_divider isn't needed anymore because the default value of 16 works. As a bonus, the baud rate can now be selected in Kconfig, instead of being hardcoded at 115200. TEST=Booted the board at 9600 and 115200 baud. Change-Id: I3d5e49568b798a6a6d944db1161def7d0a2d3b48 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/17188 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-11-06soc/intel/common: log event when MRC cache is updatedAaron Durbin
Log when the MRC cache is attempted to be updated with status of success or failure. Just one slot is supported currently which is deemed 'normal'. This is because there are more slots anticipated in the future. BUG=chrome-os-partner:59395 Change-Id: I0f81458325697aff9924cc359a4173e0d35da5da Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17231 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2016-11-06elog: add sources to reflect full event type namespace usageAaron Durbin
Some events were added in other places, but coreboot's elog namespace wasn't updated. As such there's a collision with the thermtrip event. This change at least updates the elog information to reflect potential event type uage. BUG=chrome-os-partner:59395 Change-Id: Ib82e2b65ef7d34e260b7d7450174aee7537b69f6 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17230 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-11-06elog: fix default elog_add_event_raw() declarationAaron Durbin
When CONFIG_ELOG isn't used default empty inline functions are provided, however the elog_add_event_raw() had the wrong type signature. Fix that. BUG=chrome-os-partner:59395 Change-Id: Iaee68440bbafc1e91c88a7b03e283fc3e72de0a3 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17232 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-11-06Add option to use Ada code in ramstageNico Huber
If selected, libgnat will be linked into ramstage. And, to support Ada package intializations, we have to call ramstage_adainit(). Change-Id: I11417db21f16bf3007739a097d63fd592344bce3 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/16944 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-04reef: tune trackpad i2c frequency to 400kHzAaron Durbin
This brings the frequency down to 400kHz which is spec for fast i2c. BUG=chrome-os-partner:58889 Change-Id: Ibc5f152e55ed618f18ac6425264f086b1f2d1ffa Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17215 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-04reef: tune tpm i2c frequency to 400kHzAaron Durbin
This brings the frequency down to 400kHz which is spec for fast i2c. BUG=chrome-os-partner:58889 Change-Id: I8689a062b5457aa431eaa7fb688a7170dad83fcf Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17214 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-03mainboard/intel/kblrvp: Update onboard memory specific configsNaresh G Solanki
1. Update dq, dqs map & Rcomp strength & Rcomp target. 2. Fix rvp3.spd.hex byte 2 to 0x0F(JEDEC LPDDR3 memory type). Change-Id: I7efc3499b915d1e414cfe914830232993ef10ba2 Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/17162 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2016-11-03mainboard/intel/kblrvp: Update gpio.h, spd.h & mainboard.cNaresh G Solanki
1. Update gpio.h to set proper pad config for Kaby Lake RVP3. 2. Set spd index to zero. 3. Remove nhlt specific init. Change-Id: I41a312d92acd2c111465a5e8f1771158e3f33e2b Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/17161 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-03google/veyron*: change .ddrconfig from 14 to 3ZhengShunQian
There are two configs, sdram-lpddr3-hynix-2GB.inc and sdram-lpddr3-samsung-2GB-24EB.inc that use .ddrconfig = 14. Changing .ddrconfig from 14 to 3 improves performance especially on contiguous memory accesses. Comparing the .ddrconfig: - if .ddrconfig = 3, C RDRR RRRR RRRR RRRR RBBB CCCC CCCC C--- - if .ddrconfig = 14, C DRBB BRRR RRRR RRRR RRRR CCCC CCCC C--- where - R: indicates Row bits - B: indicates Bank bits - C: indicates Column bits - D: indicates Chip selects bits .ddrconfig = 3 has multiple banks switching which improves DDR timing. BUG=chrome-os-partner:57321 TEST=Boot from fievel and play video BRANCH=veyron Change-Id: Ifdcedc28e84429b8b79c7553b38b667631d29c09 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 93882e4f2000d93c9dae5e6d4b2e1f4b7bc9489e Original-Change-Id: Ic98ebae48609a7604ec678b6bd14dd2b29b669c4 Original-Signed-off-by: ZhengShunQian <zhengsq@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/404691 Original-Commit-Ready: Shunqian Zheng <zhengsq@rock-chips.com> Original-Tested-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/17210 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-03google/veyron*: add DDR configs for new samsung DDRZhengShunQian
Add the new samsung DDR configs for all veyron except veyron_rialto: * K4E6E304EB-EGCE, ramid = 0010, 4GB * K4E8E324EB-EGCF, ramid = 1100, 2GB BRANCH=veyron BUG=none TEST=boot fievel board Change-Id: I747aa86f8c93174651a28face63b3386e22b23b3 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 5f55462e71bd481eda85af3d582cfe5b9873cc9c Original-Change-Id: I19123634c994f685683323f7d85cc4d35814e2ab Original-Signed-off-by: ZhengShunQian <zhengsq@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/345748 Original-Commit-Queue: Ren Kuo <ren.kuo@quantatw.com> Original-Reviewed-by: Philip Chen <philipchen@chromium.org> Original-(cherry-pick from cc990f27024255a326fd9fa9644deb28b01a31a7) Original-Reviewed-on: https://chromium-review.googlesource.com/404690 Original-Commit-Ready: Shunqian Zheng <zhengsq@rock-chips.com> Original-Tested-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/17209 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-03rockchip/rk3399: sdram.c: Fix msch ddrconfig register errorLin Huang
Fix msch ddrconfig register write error. Also make sure that the row number configured in msch is equal to the row number configured in the DDR controller. This would not affect systems with 4GB of memory, but is needed for 2GB configurations. BUG=None BRANCH=None TEST=Boot from kevin Change-Id: Ic95b3371faec5b31c32b011c50e55e83d949e74d Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: dfa43d3d44839d9685b6393157f51b646e9996de Original-Change-Id: I0c95378bf937a245b7cdc0583c5d2ed1347f2a3e Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/399563 Original-Reviewed-by: Derek Basehore <dbasehore@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/17208 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-03soc/intel/apollolake: Implement SPI flash status register readFurquan Shaikh
This was a dummy implementation until now which returned -1 always. Add support for reading SPI flash status register (srp0). BUG=chrome-os-partner:59267 BRANCH=None TEST=Verified by enabling and disabling write-protect on reef that the value of SRP0 changes accordingly in status register read. Change-Id: Ib1349605dd87c4a087e416f52a8256b1eaac4f4c Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17205 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-02nb/intel/i945/early_init.c: Use "IS_ENABLED(CONFIG_ ....)"Elyes HAOUAS
Change-Id: I230b5425ac9e916a5ee10a49eeaf5d6d44fd49e6 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/17192 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-02vendorcode/amd/f14: Fix ignored argument in IDS_HDT_CONSOLEŁukasz Dobrowolski
String format required two arguments however those were packaged in ( , ) so the left one was ignored. Change-Id: I59698319d5ff4215f296356147b4e22229cc9245 Signed-off-by: Łukasz Dobrowolski <lukasz@dobrowolski.io> Reviewed-on: https://review.coreboot.org/17118 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-11-02riscv: Add a bandaid for the new toolchainRonald G. Minnich
After I did a new toolchain build, I found the the mhartid register value is wrong for Spike. The docs seem to agree with Spike, not the code the toolchain produces? Until such time as the bitstreams and toolchain can find a way to agree, just hardcode it. We've been playing this game for two years now so this is hardly a new approach. This is intentionally ugly because we really need the toolchains and emulators and bitstreams to sync up, and that's not happening yet. Lowrisc allegedly implements the v1.9 spec but it's PTEs are clearly 1.7. Once it all settles down we can just use constants supplied by the toolchain. I hope the syncup will have happened by the workshop in November. This gets spike running again. Change-Id: If259bcb6b6320ef01ed29a20ce3d2dcfd0bc7326 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: https://review.coreboot.org/17183 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2016-11-02amd/hudson: Add PSP2 build for combo BIOSMarc Jones
The Stoney processor can use multiple directory structures. Turn this feature on in the makefile. Original-Signed-off-by: Marc Jones <marcj303@gmail.com> Original-Tested-by: Marshall Dawson <marshalldawson3rd@gmail.com> Original-Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> (cherry picked from commit a3334632fd53c07a046c9b23161f6ee67e5cb16e) Change-Id: I40a9ef2e6bed51bc339d3f9ae7c6f316192c4a78 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/17149 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Zheng Bao <fishbaozi@gmail.com>
2016-11-02util/amdfwtool: Fix duplicate long option nameMarshall Dawson
Make the PSP2 smufirmware2 name unique so the command-line option gets picked up. Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Original-Reviewed-by: <marcj303@gmail.com> (cherry picked from commit 98cf3880797f72aeb7169c3f8718a10092af9624) Change-Id: I5430cf8b81fb03c95e6ee9d7e53455e6224256ff Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/17146 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-02northbridge/amd: Modify 00670F00 chip.h to match DCTMarshall Dawson
The Stoney device supports only a single channel of DRAM with two DIMMs. Correct the dimmensions of the SPD lookup array. Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Original-Reviewed-by: <marcj303@gmail.com> (cherry picked from commit 54a5e4a7092b77cca90894e86387f719fa3aa2c8) Change-Id: Ib776133e411d483bb5b7e3c070199befc631d209 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/17145 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-11-02northbridge/amd: Update 00670F00 asl for reduced hardwareMarshall Dawson
Remove the language associated with the Carrizo Gfx PCIe bridges. Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> (cherry picked from commit cc32b09b0f0137c11d82f35274ca33e013f73748) Change-Id: I8b67a646f98667d500fcee5da8389c10483488da Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/17144 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-11-02northbridge/amd: Update all names and IDs for 00670F00Marc Jones
Modify the new Stoney support files to match the APU's IDs and codename. Original-Signed-off-by: Marc Jones <marcj303@gmail.com> Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> (cherry picked from commit de626730758def76e558294762a06d8ec9950cb9) Change-Id: Idc914bc80a27ac13426fdf00fc3f578ce072086f Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/17143 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-02northbridge/amd: Copy 00660F01 directories to 00670F00Marc Jones
Prepare for new 00670FF00 (StoneyRidge) support. Original-Signed-off-by: Marc Jones <marcj303@gmail.com> Original-Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Original-Tested-by: Marshall Dawson <marshalldawson3rd@gmail.com> (cherry picked from commit 037cf16883fafd329a15f903ddf97e24a879bcce) Change-Id: I130d4f13beb2c1d71e4e4e9be5011f7993b34660 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/17142 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-11-02pci_ids.h: Add ID for amd/00670F00 northbridgeMarshall Dawson
Add the D18F0 device ID for the Stoney APU. Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> (cherry picked from commit c0fd7f70527c273bcbdce5655a21ca4de4854428) Change-Id: Ib599fc6119a3cef53f4f179c2fcd0e45905d81a4 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/17141 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-02cpu/amd: Update files for 00670F00Marc Jones
Add StoneyRidge specific IDs, code, whitespace, and fix Makefles and Kconfig files. Original-Signed-off-by: Marc Jones <marcj303@gmail.com> Original-Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Original-Tested-by: Marshall Dawson <marshalldawson3rd@gmail.com> (cherry picked from commit 0bd1dc834792453d8e66216fa9a70afe2f7537d7) Change-Id: Id79f316a89b3baeae95e221fb872dc8a86e7b0f1 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/17140 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-02cpu/amd: Copy 00660F01 to 00670F00Marc Jones
Prepare for new 00670F00 (StoneyRidge) support. Original-Signed-off-by: Marc Jones <marcj303@gmail.com> Original-Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Original-Tested-by: Marshall Dawson <marshalldawson3rd@gmail.com> (cherry picked from commit 87d26e05189247685df0ca6492dc3181a1bad5e8) Change-Id: Ib296ad32a061669b28dae742cac08bb75fdd0de4 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/17139 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-02soc/intel/apollolake: Skip FSP initiated core/MP initVenkateswarlu Vinjamuri
Enable skip FSP initiated core/MP init as it is implemented in coreboot. BUG=chrome-os-partner:56922 BRANCH=None Change-Id: I9417dab3135ca1e0104fc3bde63518288bcfa76a Signed-off-by: Venkateswarlu Vinjamuri <venkateswarlu.v.vinjamuri@intel.com> Reviewed-on: https://review.coreboot.org/17201 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>