summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2021-01-24cpu/intel/haswell: Add Broadwell CPUIDs and microcodeAngel Pons
Broadwell can now use the Haswell CPU driver. Change-Id: I36138cab72b1e3ad0ff7f6434996f5ce00de9d0d Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46942 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-24cpu/intel/haswell: Set C9/C10 vccminAngel Pons
Backport commit ab7586fa26 (broadwell: Set C9/C10 vccmin) to Haswell. Change-Id: I9cddc7dd45e96c6f99327ee2583917bf8bedfbdd Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46922 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-24cpu/intel/haswell: Add fast ramp voltage for BroadwellAngel Pons
Backport commit 55228ba4b4 (broadwell: Changes from 2.2.0 ref code) to Haswell, to eventually migrate Broadwell to use the same Haswell code. Change-Id: I03d9ff16bcaab9091bd723ce933aa3f2d71e29b9 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46921 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-24lib/edid_fill_fb: Relax bits_per_pixel constraintRaul E Rangel
The Picasso VBIOS is not setting the reserved_mask_size correctly. This change relaxes the constraint to allow bpp_mask <= bits_per_pixel. This is how the code previously used to work before CB:39002. BUG=b:177094598, b:177422379 TEST=boot zork and see depthcharge working Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I2e67532fa949fbd673269d8d7f1c0d8af6124ac9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49404 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-01-23soc/intel/baytrail,broadwell: Use bootstate for save_wake_source()Kyösti Mälkki
Change-Id: I01be1b9dfefcfcf037de4153e9540c7258dc160f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49818 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-23ACPI: Add helpers for CBMEM_ID_POWER_STATEKyösti Mälkki
Create uniform logging for the (unlikely) case of a CBMEM entry disappearing. Change-Id: I7c5414a03d869423c8ae5192a990fde5f9582f2d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49817 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-01-23soc/amd: Rename chipset_state to chipset_power_stateKyösti Mälkki
To implement some common helpers for CBMEM_ID_POWER_STATE allocation use the same struct name as soc/intel. Change-Id: I5d2c06a2a7b4602374562197c99b0ad7bcf50afb Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49835 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-01-23ACPI S3: Replace stashed acpi_slp_typ valueKyösti Mälkki
We currently have a mixture of calls used to determine global ACPI S3 state. Reduce the boilerplate, ultimately acpi_wakeup_is_s3() should be the only to keep. Change-Id: Iff950d2bcf7eacbbdd40865abf62c35a2e8c3c69 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47694 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-23intel/baytrail,braswell,broadwell: Add const qualifier for power_stateKyösti Mälkki
Change-Id: I37781c1423b49130ffd0d5f9fbdd28a36c9c6179 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49821 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-23ELOG: Add const qualifier for chipset_power_stateKyösti Mälkki
It is never allowed for ELOG to modify the state. Change-Id: Ie24df3969a3744f27b23997471666e2490e24b84 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49820 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-23soc/amd/picasso/pcie_gpp: Remove duplication in pirq_data declarationRaul E Rangel
There is no reason to duplicate the table. BUG=b:170595019 BRANCH=zork TEST=boot zork with pci=nomsi and verify /proc/interrupts didn't change Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ief714266cdb1b4f89afd0d9e50238200b87687ef Reviewed-on: https://review.coreboot.org/c/coreboot/+/49367 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-01-23soc/amd/picasso/pci_gpp: Replace the swizzle string with a u8 arrayRaul E Rangel
I think it makes the code a bit cleaner. BUG=b:170595019 BRANCH=zork TEST=boot zork with pci=nomsi and verify /proc/interrupts didn't change Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ib5e8e5b690d9612e8ae257f5d15c25122e1c91e6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49842 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-01-23soc/amd/picasso/pcie_gpp: Add clarifying commentRaul E Rangel
Each bridge can only have one device. BUG=b:170595019 BRANCH=zork TEST=none Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I7e476221dfcabc841cc1ed4bc4b1175c0652dcfe Reviewed-on: https://review.coreboot.org/c/coreboot/+/49841 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-01-23mb/google/guybrush: Set FWM position to an upper addressZheng Bao
Setting other places causes build error. BUG=b:178241112 TEST=Build Change-Id: I85d5d44c458feed38d69f21f899d6b4380963ec7 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49825 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-01-23soc/amd/picasso/acpi: Remove dummy AOAC parent deviceRaul E Rangel
The dummy AOAC parent device was nice because it grouped all the AOAC devices. Unfortunately windows doesn't like this dummy device and causes "Not Found" errors. This change moves the AOAC devices to the actual devices that use them. BUG=b:175146875 TEST=Boot linux and make sure power resources are enabled/disabled. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Idd4a94baa4358ee4f15c461a5bb54ca925023a13 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49814 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-01-23soc/intel/cometlake: Add ucode for CML-HTim Crawford
Add microcode from 3rdparty repo for: - 06-a5-02 (CPUID signature: 0xa0652) Change-Id: I95419f44a1e804ce31338fe6d863f156c655321b Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47915 Reviewed-by: Jeremy Soller <jeremy@system76.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-23mb/google/auron: Drop `variant_romstage_entry`Angel Pons
Replace it with `mainboard_post_raminit`. Change-Id: I94636c775cee6c14317ecff36972e2d267d28c91 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-23mb/google/auron: Factor out SPD indexingAngel Pons
The code to read the SPD file and index it is not variant-specific. Change-Id: Iaee0a77934a45c65bf32dd0dba23cec654abc0b9 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49773 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-23mb/google/auron: Factor out `mainboard_print_spd_info`Angel Pons
It is identical for all variants that have it. Change-Id: Iec3a5f036d9b760d1075059f2db1480b1c76273e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49772 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-23mb/google/auron: Merge two print statementsAngel Pons
They are part of the same line, so merge them. Change-Id: I969ce91f7a5f16a85750c140eaa444d7923b2014 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49771 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-23mb/google/auron: Drop `spd.h` from variantsAngel Pons
Factor out common DRAM SPD definitions and relocate SPD GPIO macros. Also factor out common function definition. Drop now-empty headers. Change-Id: Id05ba6c9cea27fbad5ee831f033d0de43717847e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49770 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-23mb/intel/coffeelake_rvp: do UART pad configuration at board-levelMichael Niewöhner
UART pad configuration should not be done in common code, because that may cause short circuits, when the user sets a wrong UART index. Thus, add the corresponding pads to the early UART gpio table for the board as a first step. Common UART pad config code then gets dropped in CB:48829. Also switch to `bootblock_mainboard_early_init` to configure the pads in early bootblock before console initialization, to make the console work as early as possible. The board does not do any other gpio configuration in bootblock, so this should not influence behaviour in a negative way (e.g. breaking overrides). Change-Id: Ib827e9b2919dbd0e16f30b8dfde46348365d9622 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49438 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-23soc/intel/apl: drop LPC pad configuration codeMichael Niewöhner
Drop LPC pad configuration code since all boards now do pad configuration on their own. The comment about LPC_CLKRUNB when using eSPI is moved to `Documentation/getting_started/gpio.md`. Change-Id: I710d6aee8c3b2c8282cd321cd0688b9b26abea07 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49410 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-23drivers/intel/fsp2_0: Add meaningful ERROR messageSubrata Banik
Add the "ERROR:" tag so that it ease debug effect. TEST=Test tools like "suspend_stress_test" (specific to Chrome OS) can identify the obvious coreboot ERROR prior running S3 resume test. Change-Id: I64717ce0412d43697f42ea2122b932037d28dd48 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49798 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-22vendorcode/google/chromeos: Build CSE Board Reset in RomstageKarthikeyan Ramasubramanian
CSE Firmware Sync is being performed in romstage currently. But the CSE board reset is not included as part of romstage. This causes the CSE firmware sync to use global reset instead of EC assisted AP reset with the old Cr50 Firmware version. Include the board specific CSE reset in romstage. BUG=b:171731175,b:177795247 BRANCH=dedede,volteer,puff TEST=Ensured that the Drawlat boots to OS with both old(0.0.22) and new(0.6.7) Cr50 FW versions. Change-Id: I5e362271ffb68ffd5884279acd1ab0a462195a8a Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49850 Reviewed-by: Evan Green <evgreen@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-22soc/amd/cezanne: add pci_devs.hFelix Held
Change-Id: I9e3ee4c98a85068dc87ef96aaf65a09c6df1572d Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49781 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-22mb/amd/majolica: Add PSP support for board majolicaZheng Bao
Change-Id: Ia2470a7297c7003c7975c7d9b977f2f97174efea Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48529 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-22mb/google/guybrush: Set the ROMSIZE as 16MZheng Bao
Change-Id: Iec8b40bd89c25cd2193aff8af45d0a09b07ad6a3 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49797 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-22ec/google/chromeec: Provide EC access for Retimer firmware updateJohn Zhao
Kernel needs to access EC RFWU entry in order to retrieve from EC about port and mux info and set EC operations like modes change. This change provides EC RFWU path and update for Retimer driver usage. BUG=b:162528867 TEST=Booted to kernel and verified EC RFWU path from ACPI SSDT table. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: I3817d93cfdeedf15825dab6c537b151fd063338b Reviewed-on: https://review.coreboot.org/c/coreboot/+/49257 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-22ec/google/chromeec: Add RFWU into EC RAM for Retimer firmware updateJohn Zhao
The RFWU byte is defined as Bits[3:0] for port number and Bits[7:4] for operations. The supported operations are: RETIMER_FW_UPDATE_PORT_INFO 0 RETIMER_FW_UPDATE_PD_SUSPEND 1 RETIMER_FW_UPDATE_PD_RESUME 2 RETIMER_FW_UPDATE_GET_MUX 3 RETIMER_FW_UPDATE_SET_USB 4 RETIMER_FW_UPDATE_SET_SAFE 5 RETIMER_FW_UPDATE_SET_TBT 6 RETIMER_FW_UPDATE_DISCONNECT 7 BUG=b:162528867 TEST=Booted to kernel and verified RFWU entry from ACPI DSDT ERAM field. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: I1ba04c6357b6fd0cc33ffce33e7e430539bace79 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49051 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-22drivers/intel/usb4: Enable retimer FW upgrade mux interactionBrandon Breitenstein
In order to update the BB retimers for usb4/tbt they need to be turned on and into TBT mode. Expand the current DSM to allow for the use of an EC RAM byte RFWU to get the current state of each port and whether or not it has a retimer. It also allows Kernel to issue state transitions for the retimer to be put into TBT mode for firmware update. BUG=b:162528867 TEST=Along with work in progress kernel and EC patches, the Retimer firmware update is verified under device attached and no device attached scenarios. Change-Id: I768cfb56790049c231173b0ea0f8e08fe6b64b93 Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48630 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-01-22mb/prodrive/hermes: Fix 30 second boot delayPatrick Rudolph
The PMC doesn't response any more due to invalid CNVi GPIO configuration. This caused a 30 second boot delay in FSP-S. Use the same values as FSP-S does. Always disable external I2S BT audio and use NF3 for pad GPP_D5 and GPP_D6. Tested on Prodrive hermes: No boot delay can be observed any more. Change-Id: I6f4a954786ec21512b0dce908d333952e96de048 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49678 Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-22mb/google/octopus: Garfour override VBT selectionTony Huang
Disable DRRS in VBT to solve panel flick issue SKU ID 49/51 will use vbt_garfour.bin 50/52 will use vbt_garfour_hdmi.bin BUG=b:177783330 BRANCH=octopus TEST=emerge-octopus coreboot chromeos-bootimage check /run/debug/i915_drrs_status shows DRRS supported NO. Cq-Depend: chrome-internal:3534569 Change-Id: I5ebb66ec043a6b409dd5abbc31da417f50dbad5c Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49635 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-22mb/google/nightfury: Update RAM IDs usageSeunghwan Kim
Add support LP_16G_2133 SPD for nightfury. BUG=None BRANCH=firmware-hatch-12672.B TEST=emerge-hatch coreboot Change-Id: I3709431d8ecb600e25909f456eb0c95db3a3cde2 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49735 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-01-22types.h: Add a helper macro BITS_PER_BYTEFurquan Shaikh
This change adds a helper macro `BITS_PER_BYTE` so that it doesn't have to be defined in multiple places. Change-Id: Idc344047a5660791eaeb1ce8012910c11f6010ba Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49736 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-01-22soc/intel/alderlake: Adding Kconfig for ADL_M PCHVarshit Pandya
1. Add SOC_INTEL_ALDERLAKE_PCH_M option in Kconfig 2. Select number of I/O based on PCH Signed-off-by: Varshit Pandya <varshit.b.pandya@intel.com> Change-Id: I38783595e4b85abf5b3bec234ba01667bd9ba754 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49630 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-22soc/intel/commmon: Include Alder Lake device IDsVarshit Pandya
Add Alder Lake M specific CPU, System AGent, PCH (Alder Point aka ADP), IGD device IDs. Document Number: 619501, 626817 Signed-off-by: Varshit Pandya <varshit.b.pandya@intel.com> Change-Id: Ib13fe229f9e65eae8967aa20e28e29ac5c319265 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49629 Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-22mb/google/volteer/var/elemi: Update dptf parametersWisley Chen
Update DPTF setting from thermal team. BUG=b:177635236 BRANCH=volteer TEST=emerge-volteer coreboot chromeos-bootimage, and verified by thermal team. Change-Id: I87256b5c210ef12c09ef6dd948d80f406ae0500b Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49682 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2021-01-22soc/mediatek/mt8192: pmic: Set efuses manuallyHsin-Hsiung Wang
Some efuse settings would not be applied automatically, so we need set the settings manually. The low power consumption would not be optimal without correct efuse settings. BUG=b:172636735 BRANCH=none TEST=see 'pmic_efuse_setting: Set efuses in 11 msecs' Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com> Change-Id: Ideb862c3cb0f1fee183804aed74fcf141bf1f5df Reviewed-on: https://review.coreboot.org/c/coreboot/+/49006 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-01-22mb/google/volteer/variants/eldrid: Configure USB2 port for Type-CNick Chen
1. USB2 ports 3 and 8 assigned to Type-C connector 2. USB2 port 3 keep USB2_PORT_SHORT setting and add .type_c flag BUG=b:177481076 TEST=tested on eldrid Signed-off-by: Nick Chen <nick_xr_chen@wistron.corp-partner.google.com> Change-Id: I42a39318a151bdf1f5aeb84bb1992be128cb4a4d Reviewed-on: https://review.coreboot.org/c/coreboot/+/49452 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-01-22soc/mediatek/mt8183: Fix pq module size configYu-Ping Wu
For pq module size registers such as DISP_AAL_SIZE, the high bits should be HSIZE, while low bits should be VSIZE. Fix the incorrect settings for these registers where width and height are reversed. According to MediaTek, there is no practical impact on mt8183 devices, but it's still nice to get this fixed to avoid future confusion. BUG=b:171167210 TEST=none BRANCH=kukui Change-Id: I4b6aedf9a3ca133fcbe9cb88b99a13d228233e24 Signed-off-by: Yu-Ping Wu <yupingso@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46626 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-22mb/emulation/qemu-q35: Account for TSEGArthur Heymans
TSEG is located below TOLUD. The size is configured in ESMRAMC but can also be configured with "-global mch.extended-tseg-mbytes=5" command line argument. Note that the size in ESMRAMC needs to be 'invalid' (3) for this to take action. coreboot will leave TSEG at the default 1MiB. Note that even if TSEG does not end up being used, it is likely a good idea to not put anything there as if SMM gets locked down by something else it will suddenly be inaccessible. Change-Id: I5fd82a42d6602f1369bb3c69556c46f537542705 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48236 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-22cpu/intel/haswell: Enable timed MWAIT if supportedAngel Pons
Broadwell code unconditionally enables timed MWAIT, but not all Haswell steppings support it. In preparation for merging Haswell and Broadwell, also enable timed MWAIT on Haswell code, but only if it is supported. Change-Id: I1d11d62f1801d65ae4d5623994fd55fd35e8f34a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46916 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-22soc/amd/common/block/smbus: always return SMBus MMIO in get_sm_mmioFelix Held
The old code was broken and register 0x90 didn't even exist any more in the config space of the SMBus PCI device, so just always return the MMIO base address of the SMBus controller. As far as I've seen, no board in tree uses this functionality at the moment. Change-Id: Ib80d5c928da6022427afb8ccc969fb2aac953c2d Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reported-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49121 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-22mb/getac/p470/acpi: Convert 'battery.asl' to ASL 2.0 syntaxElyes HAOUAS
IASL optimizes the code differently, which changes the binary. However, the generated `build/dsdt.dsl` remains identical. Change-Id: Ifcc8bf4022838056bf1fff853eb2027af684064e Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45554 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-22soc/intel/baytrail,broadwell: Refactor acpi_wake_source()Kyösti Mälkki
Change-Id: I5c277a4b8536fd79bda040d4ada9b0c454399b09 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49356 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-22mb/google/kukui: Enable MT8183_DRAM_EMCP for katsuSunway
The katsu project will be using eMCP board design. BUG=b:176271935 TEST=Boots on chromebook katsu successfully. BRANCH=kukui Signed-off-by: Sunway <lisunwei@huaqin.corp-partner.google.com> Change-Id: I733a9a79e2ea6501e26bf79bfce2b1934a295342 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48893 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21soc/amd/cezanne: include LAPIC code and set MAX_CPUS to 16Felix Held
Change-Id: I97c73324900a0677165afa3f5b182a336d534968 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49730 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
2021-01-21mb/siemens/chili: do UART pad configuration at board-levelMichael Niewöhner
UART pad configuration should not be done in common code, because that may cause short circuits, when the user sets a wrong UART index. Thus, add the corresponding pads to a bootblock gpio table for the board as a first step. Common UART pad config code then gets dropped in CB:48829. Change-Id: Iad40b6315a29e7aea612a3e1a169372d296d1d6c Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49443 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21mb/up/squared: do UART pad configuration at board-levelMichael Niewöhner
UART pad configuration should not be done in common code, because that may cause short circuits, when the user sets a wrong UART index. Thus, add the corresponding pads to the early UART gpio table for the board as a first step. Common UART pad config code then gets dropped in CB:48829. Also switch to `bootblock_mainboard_early_init` to configure the pads in early bootblock before console initialization, to make the console work as early as possible. The board does not do any other gpio configuration in bootblock, so this should not influence behaviour in a negative way (e.g. breaking overrides). Change-Id: I357099f797be178543a9e6637335cd0a68633071 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49441 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21mb/intel/kblrvp: do UART pad configuration at board-levelMichael Niewöhner
UART pad configuration should not be done in common code, because that may cause short circuits, when the user sets a wrong UART index. Thus, add the corresponding pads to the early gpio table for the board as a first step. Common UART pad config code then gets dropped in CB:48829. Also switch to `bootblock_mainboard_early_init` to configure the pads in early bootblock before console initialization, to make the console work as early as possible. The board does not do any other gpio configuration in bootblock, so this should not influence behaviour in a negative way (e.g. breaking overrides). Change-Id: I8b30eb5d70c34ae3e2ed24ab52dd1357a54c5ae7 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49439 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21mb/intel/minnow3: do UART pad configuration at board-levelMichael Niewöhner
UART pad configuration should not be done in common code, because that may cause short circuits, when the user sets a wrong UART index. Thus, add the corresponding pads to the early UART gpio table for the board as a first step. Common UART pad config code then gets dropped in CB:48829. Also switch to `bootblock_mainboard_early_init` to configure the pads in early bootblock before console initialization, to make the console work as early as possible. The board does not do any other gpio configuration in bootblock, so this should not influence behaviour in a negative way (e.g. breaking overrides). Change-Id: I0b956427a9cec56d06b03f7f05138f75137b4ea3 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49437 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21mb/intel/leafhill: do UART pad configuration at board-levelMichael Niewöhner
UART pad configuration should not be done in common code, because that may cause short circuits, when the user sets a wrong UART index. Thus, add the corresponding pads to the early UART gpio table for the board as a first step. Common UART pad config code then gets dropped in CB:48829. Also switch to `bootblock_mainboard_early_init` to configure the pads in early bootblock before console initialization, to make the console work as early as possible. The board does not do any other gpio configuration in bootblock, so this should not influence behaviour in a negative way (e.g. breaking overrides). Change-Id: Ibc727302109456eb1d86652c947ce85b3a64c5b2 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49436 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21mb/intel/glkrvp: do UART pad configuration at board-levelMichael Niewöhner
UART pad configuration should not be done in common code, because that may cause short circuits, when the user sets a wrong UART index. Thus, add the corresponding pads to the early UART gpio table for the board as a first step. Common UART pad config code then gets dropped in CB:48829. Also switch to `bootblock_mainboard_early_init` to configure the pads in early bootblock before console initialization, to make the console work as early as possible. The board does not do any other gpio configuration in bootblock, so this should not influence behaviour in a negative way (e.g. breaking overrides). Change-Id: I80369ab70d5510cb4f388f3029119e7148361af4 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49435 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21mb/intel/apollolake_rvp: do UART pad configuration at board-levelMichael Niewöhner
UART pad configuration should not be done in common code, because that may cause short circuits, when the user sets a wrong UART index. Thus, add the corresponding pads to a early UART gpio table for the board as a first step. Common UART pad config code then gets dropped in CB:48829. Also switch to `bootblock_mainboard_early_init` to configure the pads in early bootblock before console initialization, to make the console work as early as possible. The board does not do any other gpio configuration in bootblock, so this should not influence behaviour in a negative way (e.g. breaking overrides). Change-Id: Id6b55d7f3d3fbfc5b55497708f24006614760d03 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49434 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21mb/intel/tglrvp: do UART pad config at board-levelMichael Niewöhner
UART pad configuration should not be done in common code, because that may cause short circuits, when the user sets a wrong UART index. Thus, add the corresponding pads to the early UART gpio table for the board as a first step. Common UART pad config code then gets dropped in CB:48829. Also switch to `bootblock_mainboard_early_init` to configure the pads in early bootblock before console initialization, to make the console work as early as possible. The board does not do any other gpio configuration in bootblock, so this should not influence behaviour in a negative way (e.g. breaking overrides). Change-Id: I130fd26944169430a84c3609432b1b5283581c99 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49432 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21mb/intel/jasperlake_rvp: do UART pad config at board-levelMichael Niewöhner
UART pad configuration should not be done in common code, because that may cause short circuits, when the user sets a wrong UART index. Thus, add the corresponding pads to the early UART gpio table for the board as a first step. Common UART pad config code then gets dropped in CB:48829. Also switch to `bootblock_mainboard_early_init` to configure the pads in early bootblock before console initialization, to make the console work as early as possible. The board does not do any other gpio configuration in bootblock, so this should not influence behaviour in a negative way (e.g. breaking overrides). Change-Id: Ie3878b47b8e20c51b928a38df9ccedf2d50d478e Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49431 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21mb/intel/icelake_rvp: do UART pad config at board-levelMichael Niewöhner
UART pad configuration should not be done in common code, because that may cause short circuits, when the user sets a wrong UART index. Thus, add the corresponding pads to the early UART gpio table for the board as a first step. Common UART pad config code then gets dropped in CB:48829. Also switch to `bootblock_mainboard_early_init` to configure the pads in early bootblock before console initialization, to make the console work as early as possible. The board does not do any other gpio configuration in bootblock, so this should not influence behaviour in a negative way (e.g. breaking overrides). Change-Id: Ib19a4f64eaf25bf2eb47ee60748a68538fc0729a Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49430 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21mb/google/reef: do UART pad configuration at board-levelMichael Niewöhner
UART pad configuration should not be done in common code, because that may cause short circuits, when the user sets a wrong UART index. Thus, add the corresponding pads to the early UART gpio table for the board as a first step. Common UART pad config code then gets dropped in CB:48829. Also switch to `bootblock_mainboard_early_init` to configure the pads in early bootblock before console initialization, to make the console work as early as possible. The board does not do any other gpio configuration in bootblock, so this should not influence behaviour in a negative way (e.g. breaking overrides). Change-Id: I279956f30cbb6fb031cdfe6aaa09b644b6b7d3e7 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49427 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21mb/intel/minnow3: drop unneeded call to lpc_configure_padsMichael Niewöhner
The LPC/eSPI pad configuration is already done at board-level. Thus, drop redundant configuration by dropping the call to lpc_configure_pads. Change-Id: Ib9e62bf19e6f1fbe32a340e4802c13504a0d6def Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49417 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21mb/intel/leafhill: do LPC/eSPI pad configuration at board-levelMichael Niewöhner
Do LPC/eSPI pad configuration at board-level to match other platforms by adding an appropriate early gpio table in the bootblock. The soc code gets dropped in CB:49410. Change-Id: Ie1e53e72c65fdcfe4be2e01134873aa7858c28ff Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49416 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21mb/intel/glkrvp: do LPC/eSPI pad configuration at board-levelMichael Niewöhner
Do LPC/eSPI pad configuration at board-level to match other platforms. This is done by adding one missing pad to the early gpio table and dropping the call to the soc function. The soc code gets dropped in CB:49410. Change-Id: I210633d4520fcfab59f68268bd7991557433ce38 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49415 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21mb/up/squared: do LPC/eSPI pad configuration at board-levelMichael Niewöhner
Do LPC/eSPI pad configuration at board-level to match other platforms by adding an appropriate early gpio table in the bootblock. The soc code gets dropped in CB:49410. Change-Id: If0693a4419c58dde3c4536698940f03c30304b9d Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49414 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21mb/google/reef: do LPC/eSPI pad configuration at board-levelMichael Niewöhner
Do LPC/eSPI pad configuration at board-level to match other platforms. This is done by adding missing pads to the bootblock gpio table. The soc code gets dropped in CB:49410. Change-Id: I95993b1bd4f1fd8b4ac7b21fb89ec4d196b0240a Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49412 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21mb/google/hatch: do UART pad configuration at board-levelMichael Niewöhner
UART pad configuration should not be done in common code, because that may cause short circuits, when the user sets a wrong UART index. Thus, add the corresponding pads to the early UART gpio table for the board as a first step. Common UART pad config code then gets dropped in CB:48829. Also switch to `bootblock_mainboard_early_init` to configure the pads in early bootblock before console initialization, to make the console work as early as possible. The board does not do any other gpio configuration in bootblock, so this should not influence behaviour in a negative way (e.g. breaking overrides). Change-Id: I62ffbe36bd7b7675aa0f41a8c6e9214d04ad4ae5 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49428 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21mb/google/glados: do UART pad configuration at board-levelMichael Niewöhner
UART pad configuration should not be done in common code, because that may cause short circuits, when the user sets a wrong UART index. Thus, add the corresponding pads to the early gpio table for the board as a first step. Common UART pad config code then gets dropped in CB:48829. Also switch to `bootblock_mainboard_early_init` to configure the pads in early bootblock before console initialization, to make the console work as early as possible. The board does not do any other gpio configuration in bootblock, so this should not influence behaviour in a negative way (e.g. breaking overrides). Change-Id: I6fedcebea3bb31d992bac1e3b21382fea93a8b82 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49429 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21mb/google/octopus: do UART pad configuration at board-levelMichael Niewöhner
UART pad configuration should not be done in common code, because that may cause short circuits, when the user sets a wrong UART index. Thus, add the corresponding pads to the early UART gpio table for the board as a first step. Common UART pad config code then gets dropped in CB:48829. Also switch to `bootblock_mainboard_early_init` to configure the pads in early bootblock before console initialization, to make the console work as early as possible. The board does not do any other gpio configuration in bootblock, so this should not influence behaviour in a negative way (e.g. breaking overrides). Change-Id: Ieeb738afd54e77ee853ee109009f611411aa0d4a Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49426 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21mb/google/dedede: do UART pad config at board-levelMichael Niewöhner
UART pad configuration should not be done in common code, because that may cause short circuits, when the user sets a wrong UART index. Thus, add the corresponding pads to the early UART gpio table for the board as a first step. Common UART pad config code then gets dropped in CB:48829. Also switch to `bootblock_mainboard_early_init` to configure the pads in early bootblock before console initialization, to make the console work as early as possible. The board does not do any other gpio configuration in bootblock, so this should not influence behaviour in a negative way (e.g. breaking overrides). Change-Id: I5482f44b361925b7d2dbcbf1065c1be035c68b0b Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49424 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21mb/google/drallion: do early pad configuration in early bootstageMichael Niewöhner
Do early pad configuration in early bootblock before console init, to make the console work as early as possible. The board does not do any other gpio configuration in bootblock, so this should not influence behaviour in a negative way (e.g. breaking overrides). Change-Id: I7dcf88d61c305f0598a0a79f8cfa46ef5009564b Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49419 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2021-01-21mb/google/octopus: do LPC/eSPI pad configuration at board-levelMichael Niewöhner
Do LPC/eSPI pad configuration at board-level to match other platforms by adding an appropriate early gpio table in the bootblock. The soc code gets dropped in CB:49410. Change-Id: Ie33bae481f430a1c4410a0a4e2b2a34a3e78adaa Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49411 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21cpu/intel/haswell: Clean up CPUID definitionsAngel Pons
The `mobile` suffix is misleading, since desktop CPUs share the same CPUIDs. Remove unused stepping IDs and add the full CPUIDs instead. Finally, add Broadwell CPUIDs in preparation for merging CPU code. Note that steppings for Haswell in various comments are incorrect. Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 remains identical. Change-Id: I19e56b8826b1514550ae95e6363b0df2d08e3cb7 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46915 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21cpu/intel/haswell: Add s0ix supportAngel Pons
Backport Broadwell's s0ix support to Haswell in preparation to unify both platforms' CPU code. Note that only ULT variants support s0ix. This option is currently unused, but will be put to use in subsequent commits, when switching Broadwell mainboards to use Haswell's CPU code. Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 remains identical. Change-Id: I91c6f937c09c9254a6f698f3a6fb6366364e3b2b Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46924 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21src/drivers/smmstore: Fix SMMSTOREv1 clear commandTim Crawford
The `clear` command for SMMSTORE version 1 does not require a parameter. Change-Id: I992b7ce5962bf7ee62b7e1970ae7aa1b975ef42e Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49724 Reviewed-by: Jeremy Soller <jeremy@system76.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21mb/google/volteer/variant/lindar: Enable SA GV settingKevin Chang
Allow MRC training in SA GV. BUG=b:177779469 BRANCH=firmware-volteer-13672.B TEST=Built and booted into OS. Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com> Change-Id: Idc9f634135b489450f53f8cd28d80649309d0f70 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49636 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-01-21mb/google/guybrush: Add default FMD file to the buildMathew King
BUG=b:175143925 TEST=builds; binary has correct layout Signed-off-by: Mathew King <mathewk@chromium.org> Change-Id: I4f3826c8ed0dfd7219eaa5f0cc285f1fe89a4e1d Reviewed-on: https://review.coreboot.org/c/coreboot/+/49491 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2021-01-21mb/google/volteer/variant/lindar: Configure USB2 port for type-cKevin Chang
Assigned USB2 port to type-c use. BUG=b:177483060 BRANCH=firmware-volteer-13672.B TEST=Built and booted into OS. Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com> Change-Id: I9bd820406124927d56296508be05033217c0d472 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49638 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21ach/x86/postcar.c: Avoid double CBMEM initializationFrans Hendriks
On FSP1.1 platform cbmem_initiailze() is called in chipset_teardown_car_main(). This causes double call op cbmem_initialize(). Add call to cbmem_online() to avoid double CBMEM init. BUG = N/A TEST = Build and boot on Facebook FBG1701 Change-Id: I449ddfc94f1099d7c0e9005e6a5cf509e1433bb1 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49646 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
2021-01-21drivers/intel/fsp1_1/temp_ram_exit.c: Initialize CBMEMFrans Hendriks
prog_locate() will load FSP, before CBMEM is initialized. The vboot workbuffer is used for loading, but CBMEM_ID_VBOOT_WORKBUF is not available. A NULL pointer is returned as workbuffer resulting in error 'Ramstage was not loaded!' at second boot. Initialize CBMEM before calling prog_locate(). BUG = N/A TEST = Build and boot on Facebook FBG1701 Change-Id: I2f04a326a95840937b71f6ad65a7c011268ec6d6 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49639 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-01-21soc/intel/quark: Add pwrs in <soc/nvs.h>Kyösti Mälkki
For the time being every soc/intel selects ACPI_SOC_NVS and pwrs is a required field for the common initialisation implementation of followup work. Change-Id: I4a0c7eb35f0646898e49fad15c6448607c398731 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49493 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21soc/intel/cannonlake: Allow RP#1 usage for ClkSrcJeremy Soller
0 is converted to not used, so use a special value to allow using PCIe root port #1. Change-Id: I2d64afc9bb4627913492edad8f36566e7fb18166 Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49172 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2021-01-21soc/intel/common/pcie_rp.h: Fix comment styleFurquan Shaikh
This change updates pcie_rp.h to reflow the comment blocks to fit within 80 columns to match the original style of the file. This addresses comment received on CB:49370 (https://review.coreboot.org/c/coreboot/+/49370/comment/0f3fe10d_4e218b5f/). Change-Id: I565ad602e0e3a2ee09e8345479d82e2ce0a31fd0 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49725 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-01-21cpu/intel/socket_LGA775: Increase DCACHE_RAM_SIZEElyes HAOUAS
Increase DCACHE_RAM_SIZE to 32kB and remove "NO_CBFS_MCACHE". It’s quite safe to increase DCACHE_RAM_SIZE. All LGA775 targets should have at least 256K L2 cache. That is plenty for XIP RO cache of bootblock + romstage and a 32K CAR. Change-Id: I393b2727bd90a990c3108a4dbead62b17d7fc531 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49505 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2021-01-21mb/google/dedede/var/boten: Update gpio config for botenStanley Wu
Correct GPIO settings as below reason: 1. GPP_G7 not being used but set to NF. 2. GPP_C22 and GPP_C23 is set to NC but internal pull down to 20K BUG=b:177283756 BRANCH=dedede TEST=emerge-dedede coreboot chromeos-bootimage and boot into emmc Change-Id: Idf25674efa2336bde98c5abaff278484fd71ea8b Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49348 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ben Kao <ben.kao@intel.com> Reviewed-by: Henry Sun <henrysun@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-01-21mb/google/dedede/var/boten: Replace generic driver with sx9324 driverStanley Wu
Replace i2c driver for the SX9324 proximity detector device. This is first draft settings, will modify it after fine tuning. BUG=b:175932166 BRANCH=dedede TEST=run "i2cdump -y -f 15 0x28" to confirm registers as except. un-approach： => register address: 0x01 value: 0x00 approach: => register address: 0x01 value: 0x02 Change-Id: I0c8b5948266a07092799c6db556383fa08b924e6 Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49018 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-01-21mb/google/dedede/var/boten: Update gpio settingStanley Wu
Correct GPIO settings as below reason: 1. GPP_D19/GPP_D20/GPP_D21 not being used but set to NF. 2. GPP_B7 should configure as WWAN SAR detect ODL, but set to NC BUG=b:175932166 BRANCH=dedede TEST=emerge-dedede coreboot chromeos-bootimage and boot into emmc Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com> Change-Id: Id7780d5332551ed3fd20ef14f8b5d31164f16385 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49645 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-01-21mb/intel/adlrvp: Add PRESERVE to UNIFIED_MRC_CACHESubrata Banik
This patch preserves MRC training data across FW update. Change-Id: I6b7273471e4fc9dc25eac80904e012f86a981836 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49681 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21mb/intel/adlrvp: Remove redundant HAS_RECOVERY_MRC_CACHE KconfigSubrata Banik
HAS_RECOVERY_MRC_CACHE is already part of CHROMEOS hence remove redundant Kconfig. Change-Id: Ia55b587d77ca5be2a8ae701a3ab95cfebe8627db Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49680 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-01-21soc/intel/alderlake: Disable Internal Gfx based on SOC_INTEL_DISABLE_IGDSubrata Banik
Make IGD disable when mainboard user selects SOC_INTEL_DISABLE_IGD. TEST=Able to get depthcharge pre-OS splash screen with AMD Radeon RX 5700 PCI-E DGPU when mainboard user selects SOC_INTEL_DISABLE_IGD. Change-Id: Ibbe9c8c4d77018de83815d7d203284b1fbc0da58 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49291 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-01-21soc/intel/common/graphics: Add new Kconfig SOC_INTEL_DISABLE_IGDSubrata Banik
This SOC_INTEL_DISABLE_IGD Kconfig will allow to skip IGD initialization using FSP GOP and eventually disable the IGD. TEST=Able to get depthcharge pre-OS splash screen when mainboard user selects SOC_INTEL_DISABLE_IGD with below HW/FW/SW configuration: HW: ADLRVP + AMD Radeon RX 5700 PCI-E DGPU FW: coreboot with depthcharge as payload for ADLRVP and OpRom for AMD PCI-E DGPU SW: Chrome OS RC10 release Change-Id: I465541cb45c9022d53a5beb3fff1f80660c357c9 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49470 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-01-20soc/amd/cezanne/Kconfig: select IDT_IN_EVERY_STAGEFelix Held
This adds interrupt handlers that end up calling x86_exception(). Change-Id: I3dce539b6f1ef300cf16f20224744a75100f60b8 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49726 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-01-20soc/amd/picasso/Kconfig: drop EHCI_BARFelix Held
Picasso doesn't have any EHCI controllers, so it can't support EHCI debug, so there is no need to specify a MMIO address for the early EHCI BAR configuration. Change-Id: I5e904c160c68805a8606a8b2d1ab4fb6172066e7 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49729 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-01-20soc/amd/picasso/Kconfig: drop HAVE_USBDEBUG_OPTIONSFelix Held
Picasso doesn't have any EHCI controllers, so it can't support EHCI debug. Change-Id: I2dae22c0db294f5334d9796d90f432d6c8d304df Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49685 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-01-20soc/intel: fix indentation in intelblocks/lpc_lib.hMichael Niewöhner
Change-Id: I28be6091097f713472d5ca3b8b0921ee71238cf0 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49589 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2021-01-20mb/prodrive/hermes: do UART pad configuration at board-levelMichael Niewöhner
UART pad configuration should not be done in common code, because that may cause short circuits, when the user sets a wrong UART index. Thus, add the corresponding pads to the early UART gpio table for the board as a first step. Common UART pad config code then gets dropped in CB:48829. Change-Id: I5b99a66fb64683f3647ebff3ab01ceb52058f79c Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49440 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2021-01-20soc/intel/*: drop broken LPC mmio codeMichael Niewöhner
The code for setting the LPC generic memory range uses an array of fixed address ranges not needing explicit decoding, to decide if the address needs to be written to the LGMR register. Most platforms only mistakenly add the PCH reserved mmio range, that is not decoded generally, effectively breaking the mechanism. Only APL uses the array correctly. That code, in it's current state, does not work (except for APL) and currently, there is not a single user. Thus, drop it before people start using it. Change-Id: I723415fedd1b1d95c502badf7b0510a1338b11ac Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49588 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-01-20mb/google/poppy: do early pad configuration in early bootstageMichael Niewöhner
Do early pad configuration in early bootblock before console init, to make the console work as early as possible. The board does not do any other gpio configuration in bootblock, so this should not influence behaviour in a negative way (e.g. breaking overrides). Change-Id: I795b8da3c5e1efb51c8fe4673f025839a1c630bc Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49423 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2021-01-20mb/google/fizz: do early pad configuration in early bootstageMichael Niewöhner
Do early pad configuration in early bootblock before console init, to make the console work as early as possible. The board does not do any other gpio configuration in bootblock, so this should not influence behaviour in a negative way (e.g. breaking overrides). Change-Id: I2f484d232a46214ff98168f41f96d56b047892e2 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49422 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2021-01-20mb/google/eve: do early pad configuration in early bootstageMichael Niewöhner
Do early pad configuration in early bootblock before console init, to make the console work as early as possible. The board does not do any other gpio configuration in bootblock, so this should not influence behaviour in a negative way (e.g. breaking overrides). Change-Id: I67bdd9a96928b77a9a178afea7dab03dc370312c Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49421 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2021-01-20mb/google/sarien: do early pad configuration in early bootstageMichael Niewöhner
Do early pad configuration in early bootblock before console init, to make the console work as early as possible. The board does not do any other gpio configuration in bootblock, so this should not influence behaviour in a negative way (e.g. breaking overrides). Change-Id: I342b9217af0288a3b525e629aac791eb0f880442 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49420 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2021-01-20soc/amd/picasso/mrc_cache.c: Remove unused <bootstate.h>Elyes HAOUAS
Change-Id: Ied235972d24276d7c88a2f50f192d69d24ae6e05 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45816 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-26 08:04:16 +0000