| Age | Commit message (Collapse) | Author |
|---|
|
Tree is inconsistent with the use of TCO register space offsets and
related preprocessor defines. The legacy space was offset from ACPI
PM base by 0x60, but this changed with later platforms. The convenient
way is to define the TCO registers relative to its base address and
subtract 0x60 here, but this change cannot be easily done tree-wide or
in one go.
For the transient period, apply TCO_SPACE_NOT_YET_SPLIT flag until
all platforms use a clean style of tco_{read,write} accessor functions
instead of {read,write}_pmbase16(), or worse, inw/outl().
Change-Id: I16213cdb13f98fccb261004b31e81a9a44cb6e3b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70043
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Both SMM_ASEG and SMM_TSEG choices work.
There is periodic TCO timeout occurring.
At least with DEBUG_SMI kernel reports low memory corruption.
Change-Id: If20a7092117612a1a9e25eb6ac480e105acd57d7
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61517
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Change-Id: I4db09632a41d28b0c8e211e6232db4e6d85bdf5f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70051
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=none
TEST=Build and boot to google/rex.
Excerpt from google/rex coreboot log:
[DEBUG] ME: FPFs Committed : NO
[DEBUG] ME: Manufacturing Vars Locked : NO
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: Iec07c1f951fbbf51541917c8b99d19f2f12980b2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69739
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This reverts commit 9f0e21a4dae864809e9651403ab5bad48e784bee.
It should be allowed for i82801gx/early_init.c to have
#include <southbridge/intel/common/pmutil.h>
But there is a conflict:
src/southbridge/intel/common/pmutil.h:
#define TCO1_CNT 0x68
src/southbridge/intel/common/tco.h:
#define TCO1_CNT 0x08
Followup works resolve the difficulties around the offset
0x60 used for TCO register bank, tree-wide.
Change-Id: I827558a0e0ef1c4d1f866756df51cd1b2abfc7a0
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70042
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This patch will create the baseboard structure for mtlrvp. Changes
include,
1. Adding Baseboard config for mtlrvp in Kconfig
2. Move gpio.h to corresponding baseboard directory
3. Append header reference to CPPFLAGS_common in Makefile.inc
BUG=none
TEST=FW_NAME=mtlrvp_p emerge-rex coreboot chromeos-bootimage
Signed-off-by: Harsha B R <harsha.b.r@intel.com>
Change-Id: I82acb6879fecb242014258f2c358804d5abbbd48
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69971
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
mayan is the reference board for the morgana SoC. It needs to be
updated to match the actual board design as well. amd/mayan is started
as a copy of amd/birman.
Change-Id: Id6801e6c6e706ae3878ce9e2c3d6452964235148
Signed-off-by: Ritul Guru <ritul.bits@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70010
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Based on latest schematic to update the gpio table.
BUG=b:254365935
BRANCH=firmware-brya-14505.B
TEST=FW_NAME=marasov emerge-brya coreboot
Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com>
Change-Id: I03b443826d39182eaf23ad3e4e0ba8d6b8a93022
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69180
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
|
|
SATA is not supported on google/rex hence disable it.
BUG=none
TEST=Build and boot to google/rex.
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I35a742ab9782feed86c3af514505d870d181b34b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69973
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Fix compilation issue due to enum macro redefinition by safeguarding
definitions with DISPLAY_FSP_VERSION_INFO_2 in SoC Kconfig.
Back-ported from commit f7e8adac7b3123 ("edk2-stable202005: Update
MdePkg/Include/IndustryStandard/SmBios.h") to fix compilation issue due
to enum macro redefinition.
BUG=b:260183604
TEST=Verify MTL Rex0 build with the patch
and verify the version output prints no junk data.
Signed-off-by: Saurabh Mishra <mishra.saurabh@intel.corp-partner.google.com>
Change-Id: Ibc65d05a8b4bd232b91184ff8cd52a20cd3538ae
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69961
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
|
|
Change-Id: I098104f32dd7c66d7bb79588ef315a242c3889ba
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69806
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Enable NVMe GPIOs based on fw_config and add NVMe to devicetree.
Note, eMMC and NVMe are not probed in devicetree. On first boot in
factory, the device needs to boot with unprovisioned fw_config, so all
storage devices should be enabled when unprovisioned. Currently,
devicetree disables all probed devices when unprovisioned. If we want
eMMC and NVMe to be probed, support needs to be added for enabling
probed devices when unprovisioned.
BUG=b:259211172
TEST=Verified by ODM. On craask, LTE and WCAM still work. On craaskneto,
eMMC and NVMe SKUs can both boot.
Change-Id: I76a056cddff2246cfb5bb26ddbdfc333b49d9aaf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69958
Reviewed-by: Kangheui Won <khwon@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch creates a helper function `heci_finalize()` to keep HECI
related operations separated for easy guarding again FSP config.
Currently, `heci_set_to_d0i3()` function is getting called twice.
BUG=b:260041679
TEST=Able to build google/rex with this patch and observe coreboot log
modification as below:
Without this patch:
[DEBUG] BS: BS_PAYLOAD_LOAD exit times (exec / console): 0 / 14 ms
[WARN ] HECI: CSE device 16.1 is disabled
[WARN ] HECI: CSE device 16.2 is disabled
[WARN ] HECI: CSE device 16.3 is disabled
[WARN ] HECI: CSE device 16.4 is disabled
[WARN ] HECI: CSE device 16.5 is disabled
[DEBUG] Finalizing chipset.
[DEBUG] apm_control: Finalizing SMM.
[DEBUG] APMC done.
[WARN ] HECI: CSE device 16.1 is disabled
[WARN ] HECI: CSE device 16.2 is disabled
[WARN ] HECI: CSE device 16.3 is disabled
[WARN ] HECI: CSE device 16.4 is disabled
[WARN ] HECI: CSE device 16.5 is disabled
[DEBUG] BS: BS_PAYLOAD_BOOT entry times (exec / console): 29 / 78 ms
With this patch:
[DEBUG] BS: BS_PAYLOAD_LOAD exit times (exec / console): 0 / 14 ms
[WARN ] HECI: CSE device 16.1 is disabled
[WARN ] HECI: CSE device 16.2 is disabled
[WARN ] HECI: CSE device 16.3 is disabled
[WARN ] HECI: CSE device 16.4 is disabled
[WARN ] HECI: CSE device 16.5 is disabled
[DEBUG] Finalizing chipset.
[DEBUG] apm_control: Finalizing SMM.
[DEBUG] APMC done.
[DEBUG] BS: BS_PAYLOAD_BOOT entry times (exec / console): 28 / 52 ms
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I7021a1d4c73d3fdfddfd6e809ebc1eeb1fa6d75e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69974
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
|
|
This patch drops the local implementation
`log_me_ro_write_protection_info` and adopts the API from IA common
code (cse_lite.c).
BUG=none
TEST=Able to compile the cse_lite.c file for google/kano without
any error.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I087ffb8ac94f14a6bd7f2bf6bb907c4047dc9899
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69969
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This patch creates an API for CSE-Lite specific SKU to retrieve the
Write Protect (WP) information (`cse_log_ro_write_protection_info`)
like WP range and limit, if the region is write-protected or not etc.
BUG=none
TEST=Able to compile the cse_lite.c file for google/kano without
any error.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I8f4b7880534ded5401b6f8d601ded88019c636c8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69968
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Follow thermal table from thermal team.
1. Modify TS1 passive policy to 68.
BUG=b:249446156
TEST=emerge-nissa coreboot chromeos-bootimage
Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Change-Id: I8539a29cab4863034a2b64d38aef4b772473246d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69960
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
As for mainboard mc_ehl1, a hard real-time dependency is also required
for this mainboard. The L1 prefetcher on Elkhart Lake is too aggressive
which in the end leads to an increased number of cache misses. Disabling
the L1 prefetcher boosts up the performance (in some cases by more than
10 %) in this specific use case.
Change-Id: I07b27dd672533e693a6c2987d16f54333850760e
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69966
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Move the chip configuration to the cpu cluster device.
It looks like none of the devicetree were featuring a lapic 0xacac,
nor was tcc_offset ever set, so this remains a NOP.
Change-Id: I296631511b0e31b0ed43ca8193552483bdab4482
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59315
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
These boards do no fill MADT with useful information.
Change-Id: Ie61e4e4b03c9b7fcd70aba7a2bd71eadd6f4dab1
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69777
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
The cpu cluster is always present and it's the proper device to contain
the settings that need to be applied to all cpus. This makes it possible
to remove the fake lapic from devicetrees.
Change-Id: Ic449b2df8036e8c02b5559cca6b2e7479a70a786
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59314
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Set of boards and platforms did not have LINT1 configured
as NMI source.
Change-Id: I65044125562bda363b3a0d92da6137c77a28b587
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69528
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use the broadcast ID to deliver LINT1 as NMI to all CPUs,
instead of listing individual LAPIC IDs.
Change-Id: Iaf714d8c2aabd16c59c3bcebc4a207406fc85ca9
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69527
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
`is_untrusted` is eventually ended up by adding DMA property _DSD which is similar to what `add_acpi_dma_property` does for WWAN drivers, hence it
makes sense to have a unified name across different device drivers.
BUG=b:259716145
TEST=Verified that the _DSD object is still present in the SSDT.
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I4e0829a76a193b0a1e1e0f2b7ce2119bb00dd696
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69937
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
A previous CL ("Add missing ACPI device path names",
commit d22500f0c61f8c8e10d8f4a24e3e2bf031163c07) caused some errors
from the Kernel on Brya devices (see Tim's comment on patchset 8):
> ACPI Error: AE_NOT_FOUND, While resolving a named reference
> package element - \_SB_.PCI0.FSPI
FSPI is defined in src/soc/intel/alderlake/chipset.cb:
device pci 1f.5 alias fast_spi on end
This CL adds the corresponding FSPI device to the DSDT to prevent
the error mentioned above.
TEST=Built and tested on brya by verifying the error is gone.
BUG=b:231582182
Change-Id: I11e89ad2a5d47f6b579f755b0a41399ee3cb856c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69920
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
On a 32-bit host, uintptr_t is defined as 'unsigned int' instead of
'unsigend long int' like on a 64-bit host. When cbfstool is built on a
32-bit host, the printk format specifier '%lx' expects a 'long int'
while new_addr is of type 'uintptr_t', aka 'unsigned int'.
This in the end leads to a build error.
To fix this and make it build on both, 32- and 64-bit hosts, use PRIxPTR
as the format specifier. This macro will be resolved at compile time in
the right way on both, 32- and 64-bit hosts.
Test=Build cbfstool on 32- and 64-bit hosts.
Change-Id: Ia917d2ed31778f3a29c0a6c7368f74c15319b099
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69682
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
The current IPU ES entry value is always set to true for RPL and
kernel picks the ES version of the main IPU FW even for the production
bootloader but loading is not successful due to the authentication
failure.
On Raptor Lake silicon, the production binaries are backward
compatible with ES parts.
This change removes the IPU ES support ACPI entry since the
kernel needs to load the production IPU main firmware on both the
ES/QS parts.
BUG=b:258125833
TEST=Verify the Camera functionality by enabling the IPU secure mode
on RPL variants with both ES/QS silicon.
Signed-off-by: Jim Lai <jim.lai@intel.com>
Change-Id: I9fd8ea0dd6ffdb16961bb017ba4388bf99e4d5bc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69929
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Perform a codec reset before configuring to avoid potential issues like
oryp5 had before 86f410479ca9 ("mb/system76/oryp5: Reset HDA before
configuring").
Inspecting proprietary firmware for multiple boards shows that this is
always done as well.
Change-Id: I64c1fd23f708f77a81fad0bc889f42d4df3f6e61
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66918
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
|
|
Use correct GUID for DmaProperty in ACPI _DSD.
Reference:
https://learn.microsoft.com/en-us/windows-hardware/drivers/pci/dsd-for-pcie-root-ports
Before:
Name (_DSD, Package (0x02) // _DSD: Device-Specific Data
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301") /* Device Properties for _DSD */,
Package (0x01)
{
Package (0x02)
{
"DmaProperty",
One
}
}
})
After:
Name (_DSD, Package (0x02) // _DSD: Device-Specific Data
{
ToUUID ("70d24161-6dd5-4c9e-8070-705531292865"),
Package (0x01)
{
Package (0x02)
{
"DmaProperty",
One
}
}
})
BUG=b:259716145
TEST=Verified the new GUID is reflected in ACPI SSDT at runtime.
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I05b8c3bf23cc43863527bc514d9a96096d45003c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69932
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
A function declaration without a prototype is deprecated in all versions
of C.
Change-Id: Ie22231908233f2fba25d78f6c5f53940011e8158
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69748
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For the most part, this doesn't change any post codes, simply making the
existing post-codes into macros.
picasso/romstage.c did get a couple of post codes removed to match the
other files.
The POST_ROMSTAGE and POST_BOOTBLOCK codes are intended to become global
at some point, while the POST_AGESA and POST_PSP codes would stay AMD
specific.
Change-Id: I007a09b6a3ed3280bac674cd74e298ec5c408ab7
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69867
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Taken from Linux which also updated these files.
Clang only works with this syntax, so this fixes builds for arm.
TESTED on qemu vexpress-a9 and verstage on google/vilboz with
BUILD_TIMELESS=1, binaries remain the same.
Change-Id: Ia320dc2c460c99d934b8f17dee7748a9def4e750
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63058
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add conn0/conn1 for pch_espi.
BUG=b:254365935
BRANCH=firmware-brya-14505.B
TEST=emerge-brya coreboot.
Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com>
Change-Id: I5969d2941c02400788d66521680fcd13d3a6b13f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69785
Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch decouples HECI disabling interface a.k.a SMM or PCR or PMC
IPC etc. from DISABLE_HECI1_AT_PRE_BOOT kconfig as Intel ME BWG
recommends to disable the CSE PCI device while CSE is in
software temporary disable state.
BUG=b:260183610
TEST=Able to build google/rex.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I3c9c5a73028cde90af3553093a13d0c05b831bae
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69930
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Declare touchscreen and touchpad under I2C3 and I2C5
BUG=b:254365935
BRANCH=firmware-brya-14505.B
TEST=Built successfully
Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com>
Change-Id: Ifc865fc0c0c42af0d74272289c562e347fac3a9e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69467
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Also remove unused DEBUG_PERIODIC_SMIS macro.
Change-Id: Ieb8487c7757b89a09c1cee4a83f94b9077dac87e
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69899
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Also, use {read,write}_pmbase16() in lpc.c file instead of inw/out.
Change-Id: Id281a3478051c4876ccbe26452d8744769c86654
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69878
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Set downshift counter to 2 for all Marvell PHYs on this mainboard before
the PHY downshifts to the next highest speed.
Change-Id: I32b5f25a3e1e0f962dff3110143e236992ef8e7d
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69887
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch provides the functionality to enable downshift on Marvell
PHY. By setting a downshift counter, the PHY is correspondingly often
attempted to establish Gigabit link before the PHY downshifts to the
next highest speed. The range is limited to 8 trials. To activate
downshift, a software reset must follow to take effect.
Change-Id: I4224eab6c1fc13824d53556c80435bc130a13bdb
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69853
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
On this mainboard Marvell PHY INTn is routed to LED[2] pin.
Change-Id: I28a78afdcf0599bb998f906ce8056a0586e24f33
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69434
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
INTn on Marvell PHY can be routed to LED[2] pin. This setting must be
made via LED Timer Control Register on page 3.
Change-Id: Ida1efbb604c382676b9d13ac8bf14de768f93637
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69433
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This mainboard has three Marvel PHYs connected to the internal SOC GbE
controllers. The default LED status after HW reset of this PHYs shows a
different mode than what is needed. LED[2] is not connected on this
mainboard.
This patch sets the following LED status:
LED[0] - 7 = On - 1000 Mbps Link, Off - Else
LED[1] - 1 = On - Link, Blink - Activity, Off - No Link
LED[2] - not connected
TEST=Try different register values to verify LED feature.
Change-Id: I51d817bc720bf787279777f503efdc17dbb1274d
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69387
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For Marvel PHY it could be necessary to customize the shown LED status
at the connector. The LED status can be changed via Function Control
Register on page 3.
Link to the Marvell PHY 88E1512 datasheet:
https://web.archive.org/web/20221109080111/https://www.marvell.com/content/dam/marvell/en/public-collateral/phys-transceivers/marvell-phys-transceivers-alaska-88e151x-datasheet.pdf
Change-Id: Ia71c43f4286f9201f03cb759252ebb405ab81904
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69386
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch provides helper functions to read or write a register via the
MDIO bus. They can be used from drivers to easily access registers on
the MDIO bus.
Change-Id: I293d93435d27269a071b4b9b94a1b55307c575a7
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69611
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This driver enables the usage of an external Marvell PHY 88E1512 which
should be connected to a SOC internal MAC controller. In a first step it
is only the framework of the driver. Functionality will follow with a
second patch.
Change-Id: I24011860caa7bb206770f9779eb34b689293db10
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69384
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch refactors the MDIO access for the TSN GbE device by placing
the MDIO read and write functions into mdio_bus_operations struct which
is assigned to the .ops_mdio member of the PCI device struct. In this
way the MDIO interface of the TSN GbE device is exposed and can be used
by other drivers if needed.
Change-Id: I5d1b9dd2f2ba8c18291fff314c13f0c3851784aa
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69383
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
This patch extends the available device paths with a new device 'mdio'.
MDIO is the 'Management Data Input/Output' called interface which is
used to access an Ethernet PHY behind a MAC to change settings. The real
payload data path is not handled by this interface.
To address the PHY correctly on the MDIO bus, there is a 5 bit address
needed, which often can be configured via pins on the mainboard.
Therefore, the new introduced device has an 'addr' field to define its
address. If one wants to use a MDIO device in devicetree, the syntax is
straight forward (example):
device mdio 0x2 on end
As the MDIO interface is driven by the MAC, most likely this MDIO device
will be hooked in as a child device of the (PCI attached) MAC device.
With the new introduced ops_mdio a new interface is added to provide an
API for read and write access over MDIO.
Change-Id: I6691f92c4233bc30afc9029840b06f74bb1eb4b2
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69382
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch skips setting D0I3 bit for all HECI devices by FSP.
The learning being made from Alder Lake platform showed that the CSE
EOP cmd response time is highly nondeterministic and letting the EOP
cmd issued by FSP makes the response time even worse.
The idea being pursued during Alder Lake platform is to let FSP skip sending the EOP cmd and coreboot sends it at the last minute
(late sending of EOP) to ensure there is ample time for CSE to come
to a state where the response to the EOP is almost immediate.
There were a number of refactoring being done to ensure the EOP cmd
can be sent at the later stage.
#1: Ensure FSP is not putting those HECI devices into the D0i3. (SoC specific change)
#2: Modify the CSE related boot state based operation to allow a
proper window for sending late EOP cmd. (Common Code Specific change)
The entire refactoring helps us to save ~60ms of boot time.
Without those code change EOP sending timestamp as below:
943:after sending EOP to ME 1,248,328(61,954))
With those code change EOP sending timestamp as below:
943:after sending EOP to ME 1,231,660 (2,754)
Port of commit d6da4ef69e4e ("soc/intel/alderlake: Skip setting D0I3
bit for HECI devices") to incorporate the #1 which is a SoC specific
code change.
BUG=none
TEST=FSP-S UPD dump suggested `DisableD0I3SettingForHeci` UPD is
set to `1`.
Excerpt from google/rex coreboot log:
[SPEW ] DisableD0I3SettingForHeci : 0x1
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I1c3765ce41f192ab5f5ff176e0a2b49b312d18d2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69680
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Adjust SPD ID order
DRAM Part Name ID to assign
MT62F512M32D2DR-031 WT:B 0 (0000)
H9JCNNNBK3MLYR-N6E 1 (0001)
MT62F1G32D4DR-031 WT:B 2 (0010)
H9JCNNNCP3MLYR-N6E 3 (0011)
BUG=b:254365935
BRANCH=None
TEST=run part_id_gen to generate SPD id
Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com>
Change-Id: I3a62cf355508debce387c48d9d089e73763b2bf0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69784
Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Adding cros_gpios for crossystem to access WP GPIO
BUG=b:258048687
TEST= run FAFT firmware_WriteProtect passed.
Signed-off-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Change-Id: Ieac1df805c6399aefdc13aae136630d496aacd58
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69924
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The brask doesn't include a real chassis so we don't need to configure
the fan setting in the overridetree.cb. Instead, we can leave the fan
running at full speed after the device boot up.
BUG=b:259643676
BRANCH=firmware-brya-14505.B
TEST=flashed the bios to the device and make sure the fan spinned
at full speed.
Change-Id: I6075b6171ca4d7b907679efd0ce7e355759385bc
Signed-off-by: Zhuohao Lee <zhuohao@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69791
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Based on the latest schematic to update the gpio table.
BUG=b:239513596
TEST=emerge-brask coreboot
Signed-off-by: Kevin Chiu <kevin.chiu.17802@gmail.com>
Change-Id: Ifaf0629dcd77d21cf09fe84e760f1f22c075467f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69463
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Override devicetree configuration based on the latest gaelin schematic.
BUG=b:249000573, b:254375472
BRANCH=firmware-brya-14505.B
TEST=FW_NAME=emerge-brask coreboot
Change-Id: I3a741feec52cf73da8d6ec0b03cc93d6a4cba256
Signed-off-by: Raymond Chung <raymondchung@ami.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69137
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Update devicetree setting per the schematic.
BUG=b:239513596
TEST=emerge-brask coreboot
Signed-off-by: Kevin Chiu <kevin.chiu.17802@gmail.com>
Change-Id: I8746d44daa43c06723bdfcac6803eb90a3c124b3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69423
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Update the fields that need to be updated directly in the local static
usb_phy_config struct instead of dereferencing the pointer written to
the corresponding UPD field. This will allow updating the type of UPD
field in a follow-up commit to enable 64 bit coreboot builds.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I44a9fe719e6803fc957fee3db13b261489ed313d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69896
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
This ports forward part of commit df0968062622 ("soc/amd/picasso: Add
support for 64bit builds") to the newer AMD SoCs.
Use -Wl instead of -l to get the output format that the commands in the
Makefile expect to extract the value for PSP_BIOSBIN_SIZE. Without this
change, readelf will split the output into two lines in case of a 64 bit
coreboot build. This results in invalid amdcompress and amdfwtool
command lines which will cause the amdfwtool call to fail with
Error: BIOS binary destination and uncompressed size are required
With the old readelf -l command we get this output in a 64 bit build:
Program Headers:
Type Offset VirtAddr PhysAddr
FileSiz MemSiz Flags Align
LOAD 0x0000000000000080 0x0000000002030000 0x0000000002030000
0x0000000000010000 0x0000000000010000 RWE 0x10
while we get the correct output in a 32 bit build:
Program Headers:
Type Offset VirtAddr PhysAddr FileSiz MemSiz Flg Align
LOAD 0x000060 0x02030000 0x02030000 0x10000 0x10000 RWE 0x20
With readelf -Wl we also get the expected output in a 64 bit build:
Program Headers:
Type Offset VirtAddr PhysAddr FileSiz MemSiz Flg Align
LOAD 0x000080 0x0000000002030000 0x0000000002030000 0x010000 0x010000 RWE 0x10
TEST=This fixes the 64 bit build on Cezanne with some follow-up patches
applied.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I35f9feda4d0da3546592dfac233ca66732bd5464
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69895
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
This reverts commit 7203aa5c2dcb90e50356305cabbe062bd4f4dc76.
BUG=b:260138434
TEST=None
Cq-Depend: chrome-internal:5126951, chromium:4049177
Change-Id: Ieaa44a33a7c65d384581b5145821b449783ca3fa
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69919
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Skip eDP initialization when we failed to get EDID. This prevents the
PLL assertion in dp_intf_config() if the display could not be
initialized properly.
BUG=b:233720142
TEST=boot to depthcharge on MT8188 EVB.
Change-Id: I0fd672b175feb9b813c1d9ec4140e4273079ff07
Signed-off-by: Liju-Clr Chen <liju-clr.chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69858
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ic6c711fe3fad19c24ca4c01f8d0a4bc002f14bd6
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69807
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use post_code() instead of 'outb(value, CONFIG_POST_IO_PORT)'.
Change-Id: I1ba6bff810b61a1249cda6e96eb40f4a81381322
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69901
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
All parameters of DPTC_INPUT() need to be configured on devicetree
when SOC_AMD_COMMON_BLOCK_ACPI_DPTC is enabled. The parameters without
configurations on devicetree would be 0 when
SOC_AMD_COMMON_BLOCK_ACPI_DPTC is enable. Follow AMD DevHub document
#57316. Configure vrm_current_limit_mA, vrm_maximum_current_limit_mA
and vrm_soc_current_limit_mA on devicetree with thermal table config E
as default table for SMT. Since the dynamic thermal table switching
mechanism is still under cooking, after discussing with thermal team,
suggest adopting config E(limit Soc not reach to max power) as default
thermal config to avoidany thermal-related issue during phase build.
Once the dynamic thermal table switching mechanism is finished, will
change the default value to config A.
BUG=b:258572474, b:248976976, b:259167917, b:257394883
TEST=emerge-skyrim coreboot
Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com>
Change-Id: Ic1e7a46cac4119c7237d96a7bd0d23c8db028680
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69830
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
|
|
This patch helps to save 10.200ms of booting time without any issue
seen during MP Init. All cores are out from reset and alive.
Port the Alder Lake 'commit 6526e7896727 ("soc/intel/alderlake: Select X86_INIT_NEED_1_SIPI Kconfig for RPL")' also to Meteor Lake.
Additionally, no performance degradation is observed while running
benchmarks.
BUG=b:211770003
TEST=Able to boot Google, Rex to ChromeOS with all cores enabled.
Without this patch:
30:device enumeration 1,480,217 (28,232)
With this patch:
30:device enumeration 1,472,466 (18,334)
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Iec21470b9b34514169789c39bdc3be4e4ff6c7b5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69851
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For the most part, this just moves the existing post codes into macros
so that they're not just bare numbers.
cache_as_ram.S:
Post code 0x28 was previously pointless with just a single jump between
it and post code 0x29, car_init_done. This code was removed, and the
0x28 value was used to differentiate the car_nem_enhanced subroutine
from the other 0x26 post codes used before calling the clear_car
subroutine.
All other post codes remain identical.
POST_BOOTBLOCK and POST_CODE_ZERO are expected to become global, whereas
the POST_SOC codes are expected to be Intel only.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I82a34960ae73fc263359e4519234ee78e7e3daab
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69865
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This moves a lot of post code values, but unifies them between
platforms, so that the same value means the same thing as much as
possible.
The P4-netburst code was the most extensive and most different, so that
dictated the majority of the values. Three were two values there that
didn't match the other files, so those two values, 0x22 & 0x29 have
duplicate entries in the table.
The rest of the entries are similar between platforms, though the values
for many of them were moved to match the P4-netburst values.
POST_BOOTBLOCK and POST_POSTCAR values are intended to eventually become
global, while POST_SOC would be specific to the Intel platforms.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: If13e40b700a41d56bca85510d68da0ab31a235a9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69866
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
It shouldn't be assumed that all variants of skyrim will use the same
gpio for TPM interrupts.
Use the PSP's new mailbox command to tell it what gpio the tpm interrupt
comes in on.
BUG=b:248193764
TEST=tast run <ip> hwsec.TPMContest
Verify log entry:[DEBUG] PSP: Setting TPM GPIO to 18...OK
Use incorrect GPIO in mailbox cmd and verify TPMContest test
failed.
Signed-off-by: Mark Hasemeyer <markhas@google.com>
Change-Id: I9f4005e10987caf9f32e5ac99ff5f2b9467e586c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69874
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I3c077dee1c14e4aa45f837361daf799f02d32a29
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69818
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ib20f02cc9e5be0efea8bc29fce6bd148adf28ead
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69817
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I00551dfd963d47a58284bc31f21b0fa12130fe78
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69816
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: If6c1a17d15e24ecdc56b0cc9cb7e7dc7d6e6936b
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69813
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I32b41eded11e4e575627fec3947a75c08fdfd0a6
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69812
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ieb094096e9e204e59a1f3fcf716d906e7736fb43
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69811
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I096e88158027ac22cf93a9450c869807dbc14670
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69810
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I871579cc434820294f285298fe43da4cd1da27a3
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69809
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: If4564abf060410726b0b245ba002a35ca9d30769
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69808
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ib82968724696110a8d1655928db5b2a665525d20
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69805
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I11593245fedc26489e3506d773aaff1ad34188b1
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69804
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I16689da893b5a0c3254364759d435281cb3e1caf
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69803
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ie6def0dab9ac37c0938b73d27148a49531c6b17f
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69802
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I12463d4d26c03c85fa018b421bb9166fbfeb0b60
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69801
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ibd41382d0e0ef58498ac925dc9e10b54a76a798a
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69800
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For nissa, the ISH main firmware will be included in the CSE region in
flash instead of loading it from rootfs. So remove the ISH
firmware-name.
BUG=b:234776154
TEST=Boot to OS on nirwen and yaviks UFS SKUs. Check ISH firmware is not
loaded by kernel, and device still goes to S0i3.
Cq-Depend: chrome-internal:5102230
Change-Id: I68f963e17bc0dbf9db9adaaa3f96f06b8737523b
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69868
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
BUG=b:253387689
Test:Boot to OS on craask and check SAR Proximity Sensor GPIO pin
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Change-Id: I2b2a2516890b68036e96d1a542e6a10a098cb6a7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69790
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Move smbios_ec_revision to ocp folder so that all ocp boards
share the same function without implementing again.
TESTED=Execute "dmidecode -t 0" to check corresponding field.
Signed-off-by: Tim Chu <Tim.Chu@quantatw.com>
Signed-off-by: Jonzhang Zhang <jonzhang@meta.com>
Change-Id: I898662b78d3dbab1861cee6f1b6e148297a5d11b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68785
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I7af61404d11f7e0ff5f30c42958c4dd9318538fa
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69271
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ie5355e05982b372ef69515cfa081e2afbc7b09fe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68981
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
CBFS_MCACHE is currently experiencing overflow with CBFS verification
enabled. Reduce the pre-x86 cbmem console size from ~5.5 KiB to 4 KiB.
This reduction along with the available free space in PSP shared buffer
(32 KiB) helps to increase the CBFS_MCACHE size from 8 KiB to required
14 KiB.
BUG=b:259342909
TEST=Build and boot to OS in Skyrim. Ensure that there are no CBFS
mcache overflows.
FMAP: area COREBOOT found @ 80a000 (8347648 bytes)
VB2:vb2_digest_init() 0 bytes, hash algo 2, HW acceleration unsupported
CBFS: mcache @0x00019a40 built for 67 files, used 0x19a0 of 0x1c00 bytes
CBFS: Found 'apu/amdfw_a' @0x0 size 0x3ff80 in mcache @0x0001b640
VB2:vb2_digest_init() 262016 bytes, hash algo 2, HW acceleration enabled
Ensure that firmware_CbfsMcache FAFT test is successful.
Change-Id: I35e1a8c6d73e0870b6a43aac604f83a0b6c3aabe
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69827
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Remove SSE when SSE is already selected by supported CPUs.
Add "config SOCKET_SPECIFIC_OPTIONS" section to socket_p/Kconfig.
Change-Id: If2265ac716e90720e7ccc550239737d40c2f7a0a
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69447
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: Iab76316f345fb0cf2ca2a3eaf40f64a1f1b7fc13
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69814
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
VB2_FIRMWARE_WORKBUF_RECOMMENDED_SIZE is nowadays defined in
vboot/firmware/2lib/include/2constants.h, so update the comment.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia7c9a5476ae06d4bac762da1729aff878b7d0965
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69797
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
The patch parses CPU and PCH Trace Hub modes from the debug area in the
Descriptor Region. The modes can be updated in the debug area in order
to configure the CPU and PCH Trace Hub modes. The debug area's offset
starts from the SPI Flash offset:0xf00.
For runtime debugging, the OEM Section in the Descriptor Region is being
used as debug area. The OEM Section details are documented in the SPI
Programmer Guide of CSE Lite kit.
TEST=Build code for Gimble
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I61241c5c1981ddc4b21581bb3ed9f531da5f41b2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64437
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
|
|
field STORAGE 30 31
option STORAGE_UNKNOWN 0
option STORAGE_NVME 1
option STORAGE_UFS 2
end
BUG=b:254365935
TEST=emerge-brya coreboot.
Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com>
Change-Id: I17f8a852808d279a1f2b08b364cd4e525a807560
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69786
Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
One register configuring multi-pin functions was outside of the Global
Configuration Registers space and skipped in the initial port patches.
Replicate the vendor configuration and set the Super I/O pin for PECI
functionality.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I90f142a1a9ee27dd061fc71b791bd4c7df97da6b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68711
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add pcie_find_dsn() to detect and match PCIe device serial
number. In addition, vendor ID is matched when provided.
Change-Id: I54b6dc42c8da47cd7b4447ab23a6a21562c7618
Signed-off-by: Jonathan Zhang <jonzhang@meta.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54510
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
|
|
Add initial CEDT (CXL Early Discovery Table) support based on
CXL spec 2.0 section 9.14.1.
Add functions to create CEDT table (revision 1), and create CEDT
CXL Host Bridge Structure (CHBS) and CXL Fixed Memory Windows
Structure (CFMWS).
TESTED=Create CEDT table on Intel Archer City CRB, dumped the
CEDT table and examined the content.
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Change-Id: I4fbce78efc86ad9f2468c37b4827a6dadbdc6802
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64263
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
|
|
There is a note about the default I2C speed of this being 400 kHz
despite the logic in rx6110sa.c sets the fallback (correctly) to
100 kHz.
This information originally comes from the fact the dw_i2c bus
controller default speed is 400 kHz. This is irrelevant to
the default speed of this device as it can be used with any
bus controller.
BUG=none
TEST=coreboot builds correctly (no functional changes).
Change-Id: Ic0ffe5667574c59e1c1df952b84b8a3680b53341
Signed-off-by: Jan Samek <jan.samek@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69545
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This commit doesn't add any new format options, just makes selecting
existing format explicit.
Ticket: https://ticket.coreboot.org/issues/422
Change-Id: I3903aff54e01093bc9ea75862bbf5989cc6e6c55
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68746
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
|
|
This change enables the DisplayPort detection at preboot for Rex board.
BUG=b:247670186
TEST=Built image and validated DisplayPort feature at preboot on Rex.
Change-Id: I1a8a13e937c7132696aa39d85c3c6b6fb2dd13a5
Signed-off-by: zhaojohn <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67742
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
After DisplayPort is plugged into type-C port, its hpd signal
instantly presents and EC has mux_info for dp and hpd. This change
fixes the DP detection flow to avoid the 1 second delay while no DP
is connected. If DP is present, there will be requests towards PMC
through the sequence of connect, safe mode, dp and hpd mode.
BUG=b:247670186
TEST=Built image and validated the DisplayPort preboot feature on Rex.
Change-Id: I7cb95ec7fcc7e1a86e86466e6d45390eedcc4531
Signed-off-by: zhaojohn <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69694
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Update definitions on glinda used by birman.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I03065011581489b5345c16e225edc341e1d7811c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69706
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Update definitions to match morgana FSP.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: Ic893526789c05a298965702114d4a814466a5742
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69704
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
EC_HOST_EVENT_USB_CHARGER is no longer defined by the EC, so remove all
references.
BUG=b:216485035,b:258126464
BRANCH=none
TEST=none
Change-Id: I9e3e0e9b45385766343489ae2d8fc43fb0954923
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69374
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
