| Age | Commit message (Collapse) | Author |
|---|
|
This change adds ACPI properties for GTCH7503 device.
BUG=b:119169362
BRANCH=firmware-nami-10775.B
TEST=Verify touchscreen works with this change
Change-Id: I26e16b7e118121b3dd9a88c76d04898b97753df0
Signed-off-by: Crystal Lin <crystal_lin@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/29768
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The SD cardreader is on USB bus, not on SDIO/SDXC.
BUG=b:119798840
BRANCH=master
TEST=Compiles successfully and boot on DUT.
Change-Id: I8015fe35a4ff79469b5781942f588c3e1b88b751
Signed-off-by: David Wu <David_Wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/29765
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Set GPIO GPP_B4 to high to enable touchscreen wakeup.
BUG=b:119594783
BRANCH=master
TEST=DUT can wake up with touchscreen.
Change-Id: If0c9493dec367c7813047c7994cc83537aaef141
Signed-off-by: David Wu <David_Wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/29769
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
The touchpad and touch-panel CLK frequency should be smaller
than 400 kHz which described in spec.
Overwrite i2c speed parameters by overridetree.cb
BUG=b:119540449
BRANCH=master
TEST=emerge-octopus coreboot chromeos-bootimage
flash bios and check the touchpad i2c frequency meets the spec.
Change-Id: I32c3e1bbfc2cdf39e9b7865a69996e54346d5f93
Signed-off-by: Carl Yang <carl_yang@asus.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/29694
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
MTRR addresses are publicly available at cpu/x86/mtrr.h, so use
macros instead of "magic" numbers.
Change-Id: I224136ed4a19199bae0223a1aae366b3dd4ef9cf
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/29580
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change deprecates boards with id < 2. It updates touchscreen enable
GPIO in overridetree and gets rid of variant.c to update enable GPIO at
runtime. Additionally, it configures old enable GPIO as NC.
BUG=b:119885949
Change-Id: I42fb7ef90e421118a8fdfa0d343d0bcf4a9bc087
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/29786
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
|
|
This change gets rid of bid0_override_table as part of clean up effort
to deprecate bid0. Additionally, it updates the touchscreen enable
GPIO in overridetree and gets rid of variant.c to update enable gpio at
runtime.
BUG=b:119885949
Change-Id: If14abb324d9422720ca4d0f0859e092319d454ee
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/29785
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
|
|
This change updates the configuration of GPIO_178 to be active low as
per latest revision on different octopus variants. This effectively:
1. Gets rid of early_gpio_table in different variants -- phaser, meep,
fleex, bobba.
2. Deprecates board id < 2 for bobba, board id < 1 for fleex and
phaser.
3. Adds special early_gpio_table in yorp which has GPIO_178 as an
active high signal.
BUG=b:119885949
Change-Id: I024199a8f1f96db57f8fa60c4d265789cd3a0493
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/29784
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
|
|
This change configures all the pads going to debug header as not
connected.
BUG=b:111569213
BRANCH=None
TEST=None
Change-Id: Ie3ffdbf6ad9b1682deaada91b5c225b4c8dd035b
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/29780
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
|
|
This implementation adds USB port capablity map for ICL-U and ICL-Y
RVP.
Change-Id: I20bb43c47439df0a25ff148eae2b3e0546e4bc63
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/c/29792
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
Correct typo of 'compilation'
BUG=N/A
TEST=N/A
Change-Id: Iee6b8a8afc4d885d2d4ab9ee5d596e32e5e6d3f1
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/29831
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
This mainboard has four connected PCIe devices. The required root ports
are switched on and configured.
Change-Id: I82b13e1d245a172762ebd689ae136a762027033f
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/29810
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
PL4 is a preemptive CPU package peak power limit,it will never be exceeded.
Power is preemptively lowered before limit is reached.
This change provides option in devicetree and feeds FSP PowerLimit4 UPD for
power limit purpose.
Signed-off-by: Praveen hodagatta pranesh <praveenx.hodagatta.pranesh@intel.com>
Change-Id: I64b5a029104a102e5741e8b37c7992f2693180e8
Reviewed-on: https://review.coreboot.org/c/29808
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This patch add new HDA controller pci id in common hda driver.
BUG:None
TEST:Boot to Yocto linux on kabylake rvp11 and verified audio
playback functionality.
Signed-off-by: Praveen hodagatta pranesh <praveenx.hodagatta.pranesh@intel.com>
Change-Id: I820115c31bf6b8e1f1afe900b68690d84b51c259
Reviewed-on: https://review.coreboot.org/c/29807
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Boon Tiong Teo <boon.tiong.teo@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Change-Id: Ife8f7f164b26bea65a0dcde0cab339a1bb599e38
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/29834
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan T <stefan.tauner@gmx.at>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: I4e5fe3ff083f2d0db1cfde16550b57537d5f7262
Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at>
Reviewed-on: https://review.coreboot.org/c/28349
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I36de9ba6c5967dddd08a71a522cf680d6e146fae
Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at>
Reviewed-on: https://review.coreboot.org/c/28347
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Missing hob 7.3 FSP_NON_VOLATILE_STORAGE_HOB is reported always.
This hob is only generated by FSP during non-S3 and MRC data is changed.
Now display missing FSP_NON_VOLATILE_STORAGE_HOB only when this hob is
required.
BUG=N/A
TEST=Intel CherryHill CRB
Change-Id: Ice8220149c2e44bb2da010d5a7d8bc4dbeca11e0
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/29320
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Huang Jin <huang.jin@intel.com>
|
|
An additional read of PTN configuration data at the end of the
ptn3460_init function is not necessary.
Change-Id: I5f7f647242e94b1af13757d00e80ed9813d435d0
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/29799
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: I0559b8a546f7a67759377c7f51b2faa2280aa797
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/c/29793
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Some registers are not documented in "Mobile Intel 945 Express
Chipset Family" datasheet but they are in "Intel 945G/945GZ/
945GC/945P/945PL Express Chipset Family" datasheet.
Change-Id: I81f68a5b16e195626d4d271f8c7036032611bea3
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/29824
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This bug/typo was spoted by Felix Held.
As documented in the datasheet, to enable PMEGPE, HPGPE, GENGPE, we need
to write 0x7 into DEV(0:01.0) register "PCI Express-G Legacy Control"
located at 0xec.
Used address at 0x114 to enable GPEs is likely a typo.
Patch not tested.
Change-Id: Iee1c1e4b7fef21608f2678a1d4104b668a66a7e5
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/27307
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: Ic12a8c145d6348086f9931af93ce6d3b3dcb9039
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/29688
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Remove whitespace between the function name and open
parenthesis, and fix 81+ characters lines.
Unnecessary comment about 'include sandybridge.h'removed.
Change-Id: I0db1263ec11240003fe1f7080c758994fc0224d3
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/29428
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change the board id detection to support rev5, since the 2T mode still
needed in DVT build.
BUG=b:116082728
TEST=verify by ODM.
Change-Id: Ibb4cc1fd2bb54984cb7a8856ed7b9f49b78eddce
Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/29779
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
CBFS used to have a special region for the x86 bootblock, which also
contained a pointer to a CBFS master header, which describes the
layout of the CBFS.
Since we adopted other architectures, we got rid of the bootblock region
as a separate entity and add the x86 bootblock as a CBFS file now.
The master header still exists for compatibility with old cbfstool
versions, but it's neatly wrapped in either the bootblock file or in a
file carefully crafted at the right location (on all other architectures).
All the layout information we need is now available from FMAP, a core
part of a contemporary coreboot image, even on x86, so we can just use
the generic master header locator in src/lib/cbfs.c and get rid of the
special version.
Among the advantages: the x86 header locator reduced the size of the
CBFS by 64 bytes assuming that there's the bootblock region of at least
that size - this breaks assumptions elsewhere (eg. when walking CBFS in
cbfs_boot_locate() because the last file, the bootblock, will exceed the
CBFS region as seen by coreboot (since it's CBFS - 64bytes).
TEST=emulation/qemu-q35 still boots
Change-Id: I6fa78073ee4015d7769ed588dc67f9b019d42d07
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reported-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/29801
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
Change-Id: Iad60a5c8863283b7d373e1f6aaff48c40b7bb274
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/29812
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The GPIO and ACPI base sizes have defines, but they are not used.
Use GPIO_BASE_SIZE and ACPI_BASE_SIZE.
BUG=N/A
TEST=Intel CherryHill CRB
Change-Id: I348eda57ab9dc0bd45f8dc9ab0e7c47c462102fe
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/29788
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The GPIO and ACPI base sizes have defines, but they are not used.
Use GPIO_BASE_SIZE and ACPI_BASE_SIZE.
BUG=N/A
TEST=Intel BayTrail CRB
Change-Id: I3fe50effdb8236bc45d33a2345a773653df68d90
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/29330
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Huang Jin <huang.jin@intel.com>
|
|
It's not implemented for Skylake, all combinations that try to enable it
either result in Kconfig or linker errors.
Move `config SKIP_FSP_CAR` into drivers/intel/fsp1_1 where it's
effective.
TEST=Built Intel/Kunimitsu (FSP1.1) and Intel/KBLRVP8 (FSP2.0) default
configs with and without this patch: binaries stay the same.
Change-Id: Iae0a2d2c7fd7a71ed24118564e6080c4789cda28
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/29533
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
According to newest TCG ACPI Specification for Family 1.2 and 2.0
Version 1.2, Revision 8, TPM2 ACPI table has two more fields LAML and LASA.
Update the table structure definition, create the log area for TPM2 in
coreboot tables and fill the missing fields in TPM2 table. TPM2 should be
now probed well in SeaBIOS rel-1.12.0 or master.
Tested on apu2 with Infineon SLB9665 TT2.0.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ie482cba0a3093aae996f7431251251f145fe64f3
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/29800
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
The mentioned bits 14:8 are wrong as the functions always write
bits 15:8. What happens is visible in the written code. There is no need
for an extra comment.
Change-Id: I59b4d24d01a0a8fa74912f9754e7bbb217ca269d
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/29798
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
|
|
The power budget for this mainboard is very limited while the
performance demand is low. Set the CPU clock to the lowest value to
enable maximum efficiency and thus lowest power dissipation.
Change-Id: I23c7c5393deb676b94f2b0ac25e21a7a44cd8cb3
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/29773
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Add a Kconfig switch to be able to set the CPU clock to the lowest
possible ratio. If enabled the CPU will consume as little power as
possible while providing the lowest performance.
This setting can be overruled by the OS if it has an p-state driver
which can adjust the clock to its need.
Change-Id: I4a59586da72d1915749110a36f565fe2aa69e073
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/29772
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Provide a library function to set the CPU frequency to minimum
value. This will result in the lowest possible CPU clock with
the lowest possible power consumption. This can be useful in mobile
devices where the power dissipation is limited.
This setting can be overruled by the OS if it has an p-state driver
which can adjust the clock to it's need.
Change-Id: I817095b13ab8cbaab82f25c72947b00ee854d549
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/29771
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
|
|
Field 'OEMID' & "OEM Table ID" are related to DSDT table
not to mainboard.
So use macro to set them respectvely to "COREv4" and
"COREBOOT".
Change-Id: I060e07a730e721df4a86128ee89bfe168c69f31e
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/29790
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: David Guckian
|
|
No need to hide prompts, it's a user choice anyway, they should know.
The help texts were just rephrasing the prompts or stating the obvious.
Change-Id: I5694a88f2da57af2a20357c4e22c7c648053cc26
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/29802
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Gather x86 specific debug options and deflate their code a little. We
keep their hiding rules and help texts, although they don't seem much
useful.
Change-Id: I3bb8e759fc6a4871d30fccff47babfb7a291b45c
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/29751
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Initially, I wanted to move only the Kconfig DISPLAY_MTRRS into the
"Debug" menu. It turned out, though, that the code looks rather generic.
No need to hide it in soc/intel/.
To not bloat src/Kconfig up any further, start a new `Kconfig.debug`
hierarchy just for debug options.
If somebody wants to review the code if it's 100% generic, we could
even get rid of HAVE_DISPLAY_MTRRS.
Change-Id: Ibd0a64121bd6e4ab5d7fd835f3ac25d3f5011f24
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/29684
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG:none
TEST:Verify cursor response and button clicks
Change-Id: I4085b70560e2840c71b989348f56ca907e7cea4b
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/c/29777
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Shelley Chen <shchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
List of ICL board variants
1. ICL-U
DDR4 - All possible DDR4 memory type
LPDDR4 - Memory down fixed DIMM configuration
2. ICL-Y
All LPDDR4 DIMM on platform
This patch ensures to have all proper SPD configuration.
Change-Id: Id596a3c85b13559b3002dcadfee9c945256e28e7
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/c/29770
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
|
|
This implementation adds eSPI IO decode range for EC.
1. 0x800-0x8FF / 0x200-020F: EC host command range.
2. 0x900-0x9ff: EC memory map range.
Change-Id: I69e6b3a83c072036c5b3ae801f8d80dfda82478e
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/c/29764
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
|
|
We need to default this to low so the speakers don't activate in S3.
BUG=b:118248953
TEST=Used a scope to look at the line and made sure depthcharge still
beeps.
Change-Id: I70d2f4a3261d212b62e784fa7414e45b1d575612
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/c/29783
Reviewed-by: Daniel Kurtz <djkurtz@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
soc/car_setup.S is included when SKIP_FSP_CAR is enabled,
but no chipset/SoC have car_setup.S available.
Remove include and post_code() call always solving build errors.
BUG=NA
TEST=NA
Change-Id: Iebae2940eb10c9ca9054437be4740c79137bcc61
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/29687
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Huang Jin <huang.jin@intel.com>
|
|
CONFIG_FSP_USES_UPD is not used by FSP 1.1.
Remove this config from this file.
BUG=N/A
TEST=Intel CherryHill CRB
Change-Id: If922b6cb2d39b10f6657b4d80e54b226d1386c76
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/29328
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Huang Jin <huang.jin@intel.com>
|
|
Returned status code FspTempRamInit() is not displayed when error occurs.
Move the printk() call before the check for status.
BUG=NA
TEST=Portwell PQ7-M107
Change-Id: Id87e5c765d09f4ab199db9eba07a949b031a709a
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/29695
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Huang Jin <huang.jin@intel.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Main objective for this change is to export the bluetooth reset
gpio to the kernel for use in an rf-kill operation.
To do so, we enable USB acpi and define all of the USB2 devices,
which includes bluetooth's reset gpio information.
This change produces the following nodes in the SSDT :
Scope (\_SB.PCI0.XHCI.RHUB.HS01)
{
Name (_DDN, "USB Type C Port 1") // _DDN: DOS Device Name
Name (_UPC, Package (0x04) // _UPC: USB Port Capabilities
{
0xFF,
0x09,
Zero,
Zero
})
Name (_PLD, ToPLD (
PLD_Revision = 0x2,
PLD_IgnoreColor = 0x1,
PLD_Red = 0x0,
PLD_Green = 0x0,
PLD_Blue = 0x0,
PLD_Width = 0x0,
PLD_Height = 0x0,
PLD_UserVisible = 0x1,
PLD_Dock = 0x0,
PLD_Lid = 0x0,
PLD_Panel = "UNKNOWN",
PLD_VerticalPosition = "CENTER",
PLD_HorizontalPosition = "CENTER",
PLD_Shape = "OVAL",
PLD_GroupOrientation = 0x0,
PLD_GroupToken = 0x0,
PLD_GroupPosition = 0x0,
PLD_Bay = 0x0,
PLD_Ejectable = 0x0,
PLD_EjectRequired = 0x0,
PLD_CabinetNumber = 0x0,
PLD_CardCageNumber = 0x0,
PLD_Reference = 0x0,
PLD_Rotation = 0x0,
PLD_Order = 0x0,
PLD_VerticalOffset = 0x0,
PLD_HorizontalOffset = 0x0)
) // _PLD: Physical Location of Device
}
Scope (\_SB.PCI0.XHCI.RHUB.HS03)
{
Name (_DDN, "Bluetooth") // _DDN: DOS Device Name
Name (_UPC, Package (0x04) // _UPC: USB Port Capabilities
{
0xFF,
0xFF,
Zero,
Zero
})
Name (_PLD, ToPLD (
PLD_Revision = 0x2,
PLD_IgnoreColor = 0x1,
PLD_Red = 0x0,
PLD_Green = 0x0,
PLD_Blue = 0x0,
PLD_Width = 0x0,
PLD_Height = 0x0,
PLD_UserVisible = 0x0,
PLD_Dock = 0x0,
PLD_Lid = 0x0,
PLD_Panel = "UNKNOWN",
PLD_VerticalPosition = "CENTER",
PLD_HorizontalPosition = "CENTER",
PLD_Shape = "UNKNOWN",
PLD_GroupOrientation = 0x0,
PLD_GroupToken = 0x0,
PLD_GroupPosition = 0x0,
PLD_Bay = 0x0,
PLD_Ejectable = 0x0,
PLD_EjectRequired = 0x0,
PLD_CabinetNumber = 0x0,
PLD_CardCageNumber = 0x0,
PLD_Reference = 0x0,
PLD_Rotation = 0x0,
PLD_Order = 0x0,
PLD_VerticalOffset = 0x0,
PLD_HorizontalOffset = 0x0)
) // _PLD: Physical Location of Device
Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings
{
GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly,
"\\_SB.PCI0.GPIO", 0x00, ResourceConsumer, ,
)
{ // Pin list
0x0062
}
})
Name (_DSD, Package (0x02) // _DSD: Device-Specific Data
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301") /* Device Properties for _DSD */,
Package (0x01)
{
Package (0x02)
{
"reset-gpio",
Package (0x04)
{
\_SB.PCI0.XHCI.RHUB.HS03,
Zero,
Zero,
One
}
}
}
})
}
Scope (\_SB.PCI0.XHCI.RHUB.HS05)
{
Name (_DDN, "USB Type C Port 2") // _DDN: DOS Device Name
Name (_UPC, Package (0x04) // _UPC: USB Port Capabilities
{
0xFF,
0x09,
Zero,
Zero
})
Name (_PLD, ToPLD (
PLD_Revision = 0x2,
PLD_IgnoreColor = 0x1,
PLD_Red = 0x0,
PLD_Green = 0x0,
PLD_Blue = 0x0,
PLD_Width = 0x0,
PLD_Height = 0x0,
PLD_UserVisible = 0x1,
PLD_Dock = 0x0,
PLD_Lid = 0x0,
PLD_Panel = "UNKNOWN",
PLD_VerticalPosition = "CENTER",
PLD_HorizontalPosition = "CENTER",
PLD_Shape = "OVAL",
PLD_GroupOrientation = 0x0,
PLD_GroupToken = 0x0,
PLD_GroupPosition = 0x0,
PLD_Bay = 0x0,
PLD_Ejectable = 0x0,
PLD_EjectRequired = 0x0,
PLD_CabinetNumber = 0x0,
PLD_CardCageNumber = 0x0,
PLD_Reference = 0x0,
PLD_Rotation = 0x0,
PLD_Order = 0x0,
PLD_VerticalOffset = 0x0,
PLD_HorizontalOffset = 0x0)
) // _PLD: Physical Location of Device
}
Scope (\_SB.PCI0.XHCI.RHUB.HS07)
{
Name (_DDN, "POGO") // _DDN: DOS Device Name
Name (_UPC, Package (0x04) // _UPC: USB Port Capabilities
{
0xFF,
0xFF,
Zero,
Zero
})
Name (_PLD, ToPLD (
PLD_Revision = 0x2,
PLD_IgnoreColor = 0x1,
PLD_Red = 0x0,
PLD_Green = 0x0,
PLD_Blue = 0x0,
PLD_Width = 0x0,
PLD_Height = 0x0,
PLD_UserVisible = 0x0,
PLD_Dock = 0x0,
PLD_Lid = 0x0,
PLD_Panel = "UNKNOWN",
PLD_VerticalPosition = "CENTER",
PLD_HorizontalPosition = "CENTER",
PLD_Shape = "UNKNOWN",
PLD_GroupOrientation = 0x0,
PLD_GroupToken = 0x0,
PLD_GroupPosition = 0x0,
PLD_Bay = 0x0,
PLD_Ejectable = 0x0,
PLD_EjectRequired = 0x0,
PLD_CabinetNumber = 0x0,
PLD_CardCageNumber = 0x0,
PLD_Reference = 0x0,
PLD_Rotation = 0x0,
PLD_Order = 0x0,
PLD_VerticalOffset = 0x0,
PLD_HorizontalOffset = 0x0)
) // _PLD: Physical Location of Device
}
BUG=b:119275094
TEST=build and flash to nocturne, log into nocturne and
'cat /sys/firmware/acpi/tables/SSDT > /tmp/ssdt.dml', copy
that ssdt.dsml to /tmp/ssdt.dml on host machine,
'iasl -d /tmp/ssdt.dml', then verify that "reset gpio"
shows up in the HS03 node's _DSD package in the table.
Change-Id: I65d9b580fd69fd0a2c84f14b78a8e8b5e9217b16
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/29622
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Rajat Jain <rajatja@google.com>
|
|
Add ability to define a reset gpio in acpi for a USB device.
BUG=b:119275094
Change-Id: Ife3ea43a1eadf2548aa52b8fbd792e691d7cc7f2
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/29615
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Rajat Jain <rajatja@google.com>
|
|
Make sure that the Pre-Op register is cleared when an atomic cycle has
been finished without errors.
Change-Id: Ied88337125b125474b411e2f39f668171d15bfac
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/29634
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
|
|
1. Modify PCIEXBAR to accomodate Type-C Root Port
2. LPSS device mode selection
Change-Id: Ib7e4bc304f93e4b63ac2d7f194ca441dd96dd943
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/29697
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
We are seeing problems (interrupt storm) with using the same gpio for
FP MCU wake and irq signals. Reverting back to using separate gpios
for wake and irq until we resolve the issue.
BUG=b:119447525, b:115706071
BRANCH=Nami
TEST=Run powerd_dbus_suspend from kernel and make sure see DUT drop
into S0ix in the EC console. Also, unlock from lock screen with
fingerprint.
Change-Id: Id7987f28526256808b8ed49e66f66298f7cdbcee
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/29665
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Vincent Wang <vwang@google.com>
|
|
The dependencies of CONSOLE_SERIAL and DRIVERS_UART were somehow
backwards. Fix that. Now, CONSOLE_SERIAL depends on DRIVERS_UART,
because it's using its interface. The individual UART drivers
select DRIVERS_UART, because they implement the interface and
depend on the common UART code.
Some guards had to be fixed (using CONSOLE_SERIAL now instead of
DRIVERS_UART). Some other guards that were only about compilation
of units were removed. We want to build test as much as possible,
right?
Change-Id: I0ea73a8909f07202b23c88db93df74cf9dc8abf9
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/29572
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
* Add RO only FMAP.
* Add kconfig options.
Tested=OCP Wedge100s
Change-Id: I1979e0263e41f21c01c407ac81ad1198a53741e8
Signed-off-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/29593
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable vboot2 in romstage.
Change-Id: I7f1a1e8538999c5e4e54f3a4aa0cdf6d8a309c4f
Signed-off-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/29590
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
It's dead.
Change-Id: I1fc051937a36878eab23f6022bc42028d5606c83
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/29679
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
DSDT revision is =1 for ACPI v1 and =2 for greater ACPI version.
This will cause the AML interpreter to use 32-bit integers and math
if the version is 1, and 64-bit if the version is >=2.
Current spec version is 2 for ACPI 6.2-a.
Change-Id: I77372882d5c77b7ed52dcdd88028403df6f6fa7f
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/29626
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update passive temperature threshold value from 50C to 52C and
critical temperature threshold from 90C to 80C for TSR1 sensor.
BUG=b:79779737
TEST=Build and verified on Bobba/Bobba360/Sparky/Sparky360 boards
Change-Id: Iffef8afe0f1c6c80a6ae8ecb831aaf749443980e
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/29264
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
fsp_model_206ax was removed in Change-Id: I7b6bc4bfd
Change-Id: If77426fcb9f30f3e8b79d7c134053276701a5ecc
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/29690
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
|
|
The timer interrupts don't appear when HPET is enabled. This
result in Linux reporting 'MP-BIOS bug: 8254 timer not connected
to IO-APIC'
Enabling CONFIG_DISABLE_HPET disables OS use of HPET.
Intel issue 4800413 (doc #5965535) reports Windows7/Ubuntu Installation
Hang or Slow Boot Issue.
BUG=Intel #4800413
TEST=Portwell PQ7-M107
Change-Id: Ie9a78dcc736eb057c040a0a303c812adb1f76f3c
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/29655
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
|
|
Change-Id: I44f27405fc8ccbe54c7d19b70327da866390a156
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/28603
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
|
|
This change makes the early IO decode setup mirror that of other
Intel SOCs and fixes issues with COM1 not being enabled properly.
Tested by successfully successfully receiving serial output from
an 8250IO UART device at the standard 0x3f8 base address.
Change-Id: I9bd894fea62b78b81e5c80b5e88a539ebddac2df
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/29671
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
|
|
It defaults to y to avoid having to select it per mainboard. But that
makes a mess because it results in linker conflicts unless other UART
drivers disable it explicitly.
We try to be smarter about the default value for now. The real solu-
tion would be to hardcode it per mainboard. But who knows which boards
actually have it?
Change-Id: I7e755fe0e4f6d1c31ef2854603a5510c3cdc4967
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/29571
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch moves required Kconfig selection for enabling ASPM feature
(like clk_pm, L1 state etc) from soc code to intel common pch base code.
TEST=Run lspci -vvv | grep ASPM
The output shows the ASPM L1 is enable for pci devices
Change-Id: Ic77602a75f0c9ccf28ebfd57e53433dc90985a16
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/29653
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Change-Id: Ie5f73453a8cc12be5f18d8e7f0462ce3f38bb9d8
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/29585
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change adds ACPI properties for WDT8752A device.
BUG=b:117174180
BRANCH=master
TEST=Verify touchscreen on delan works with this change
Change-Id: Id1484a482de6282c97f3aac329f217bbcb7dbd18
Signed-off-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/29656
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Daniel Kurtz <djkurtz@google.com>
|
|
* Remove FSP Sandy/Ivybrige which are unused.
* Open Source implementation isn't final but
good enough to replace FSP version.
* For new ports use NORTHBRIDGE_INTEL_IVYBRIDGE
and NORTHBRIDGE_INTEL_SANDYBRIDGE
Change-Id: I7b6bc4bfdd0481c8fe5b2b3d8f8b2eb9aa3c3b9e
Signed-off-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-on: https://review.coreboot.org/29402
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I85cf93e30606bc7838852bd300a369e79370629a
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/29623
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Makefile.inc uses already model_6{9,d}x subdirs.
Change-Id: I0bfc179a83fab85e5b924751e026d906d01b3fb6
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/29613
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Rename DEBUG_SOC_COMMON_BLOCK_GPIO to DEBUG_GPIO and move it into the
Debugging menu.
Change-Id: I737d0ee7fb5423b6d16d611a144d43fd3f168a2c
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/29678
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
Change-Id: Ide9608e487793fa4a8b0e291ba168126e0484355
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/29677
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
soc_pch_pirq_init() function is only getting compiled for RAMSTAGE
hence remove unused __SIMPLE_DEVICE__ check.
Change-Id: I7f0ca62170f0af12a251c8c97155de8433a31854
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/29643
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Working:
- SATA on southbridge ports
- SATA on Marvell IDE controller ports
- USB
- COM1
- PS/2 keyboard
- DDR2 DIMMs
- PCIe x16 PEG port
- PCIe x1 ports
- PCI ports
- NIC (MAC address needs to be set in Kconfig or in a CBFS file)
- S3 resume
- Green audio line out connector (the rest is untested)
Not working:
- Floppy port. Does not seem to be mainboard-specific, though.
Untested:
- EHCI debug
TODO:
- Add documentation
Change-Id: I6ed434a691e8ef2a61e0acb1f986a59b8e1ad818
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/25691
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ib621fe01a1d1d026153124a9d46f26e31df6d818
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/29599
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Needs to increase ROPmax to 80W (includes both panel and audio),
hence the Pmax = 71W (PL4) + 80W (ROPmax) = 151W.
BUG=b:119644629
BRANCH=master
TEST=USE=fw_debug emerge-kalista chromeos-mrc coreboot chromeos-bootimage
& ensure the Pmax value is passed to FSP-S.
Change-Id: I504ff66a218bf4e385270c2cb385a83dca312a81
Signed-off-by: David Wu <David_Wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/29654
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This mainboard is based on mc_apl1. In a first step, it contains a copy
of mc_apl1 directory with minimum changes. Special adaptations for
mc_apl5 mainboard will follow in separate commits.
Change-Id: Icdbb116a822ffa7a3bfb7026a5d1164db56a0c46
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/29635
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
There's a typo in the cpu driver causing it to always use the weak
implementation defined in the devicetree instead of the real
implementation.
Tested on qemu-q35, the CPU driver contains valid values.
Change-Id: I4a6bb447bfdb3df6053c0df8be9d7c6aa8f689be
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/29675
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Even though these two mainboards use the same gpio.c file, other boards
such as the p5ql_pro do not.
Change-Id: I2f7c8c12cb1bdcf47f3b4d4cef0b11e44a5b8863
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/29447
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The register values in dram width programming changed in
commit a4fc7bef7ffab0 which broke booting on getac/p470.
TEST=getac/p470 with 2 X8DDS DRAM boots again
Change-Id: I8b3eedc8c5234e8a28948d4dc58bf565024f62ce
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/29663
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Elyes HAOUAS <ehaouas@noos.fr>
|
|
This patch makes static PIRQ->IRQ mapping, where IRQ10 is mapped
to PBRC and IRQ11 is mapped for PARC/PCRC/PDRC/PERC/PFRC/PGRC/PHRC.
Change-Id: I9693f2a52529961e6b611b69e389f01f77f77d63
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/29509
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Since PIRQ->IRQ mapping registers PxRC are not available after FSP-S call
due to PCH requirement change from CNP PCH onwards, hence making static IRQ
mapping for pci_irqs.asl and pcie.asl
Also remove unused irqlinks.asl from soc/intel/icelake/acpi/
Change-Id: Idec00c3b8a97cb5aa7b4000840aba914aea478c9
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/29508
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
GPP_D6 needs to be inverted to enter S0ix because FPMCU_INT_L is
active low. Keeps device awake otherwise.
BUG=b:119447525, b:115706071
BRANCH=Nami
TEST=Run powerd_dbus_suspend from kernel and make sure see DUT drop into
S0ix in the EC console.
Change-Id: Iad5df124e2439bbdc078d6a33f8d0510d25ecf6f
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/29650
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Setting sku_id() is not enough to get a value to show up in the SMBIOS
tables, it also needs to be returned as a string for the table creation
to consume. This change defines the smbios_mainboard_sku() function
and returns a string constant of "sku#" as expected.
Change-Id: I03013bab89d53d1eba969c6ffb7e95fcbb315a81
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/29649
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Trent Begin <tbegin@google.com>
|
|
FSP can support enable/disable Pci express LTR (Latency Tolerance
Reporting) mechanism through upd interface. Include that into coreboot
side.
BUG=N/A
TEST=N/A
Change-Id: I69b423afa4f81a2d58375734bba07792e08931d5
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/29642
Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I49554d13f1b6371b85a58cc1263608ad9e99130e
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/29638
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
|
|
Change-Id: Ic9bca9a56663926a153b93c298f69ba7d26f6e5e
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/29620
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Change tcc offset from 0 to 10 degree celsius for bobba.
BUG=b:118099582
TEST=Cross verified the value using TAT UI.
Change-Id: I68527c27635844f4edb0dda5f6018589d7bae297
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/29636
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
|
|
GPIO's that use GPI_APIC setting with DEEP causes an IRQ storm after
S3 resume. GPIOs that fire IRQs via IOAPIC need to get their logic
reset over PLTRST to prevent IRQ storm after S3 resume and hence
configuring GPP_F10 (HP_IRQ_GPIO) to use PLTRST.
BUG=none
TEST=none
Change-Id: Idc6c42cb4dc6e8eb368d605c83f584f4c69077dc
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/29540
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: caveh jalali <caveh@chromium.org>
Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I6e911556abc7b7ac3573c5807b6453eecaff7e10
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/29586
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
|
|
Change-Id: I89e03b6def5c78415bf73baba55941953a70d8de
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/29302
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Iab0bd1c5482331a0c048a05ab806bf5c4dbda780
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/29303
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Tested with GRUB 2.02 as a payload, booting Debian GNU/Linux 9.5 with
kernel 4.9.
This board works quite well under coreboot. A list of what works and
what doesn't can be found in the documentation part of this commit.
The file `data.vbt` matches the VBT in the latest stable version of the
vendor firmware (version 2.20).
Change-Id: I53483bb9fa335e86e85dfc487fef03fce4b85e2a
Signed-off-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-on: https://review.coreboot.org/29390
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
The function `acpi_fill_fadt()` is based on that of sb/intel/bd82x6x.
Tested on an ASRock H81M-HDS and a Google Peppy board, both using Linux
4.9 with `acpi=strict`. No ACPI errors or warnings appear in the kernel
log. System reset, poweroff, and S3 suspend/resume continue to work.
General improvements
--------------------
- `fadt->preferred_pm_profile` is set based on the value of
`CONFIG_SYSTEM_TYPE_LAPTOP` instead of being hardcoded.
- Constants are used instead of magic values in more locations.
- `fadt->gpe0_blk`, `fadt->gpe0_blk_len`, and `fadt->x_gpe0_blk` are set
appropriately depending on whether the system uses Lynx Point LP or
not.
- Boards can indicate docking support in the FADT via the devicetree.
Changes to existing Lynx Point boards
-------------------------------------
- `header->asl_compiler_revision` changes from 1 to 0.
- `fadt->model` is left at 0 instead of being set to 1. This field is
only needed for ACPI 1.0 compatibility.
- `fadt->flush_size` and `fadt->flush_stride` are set to 0. This is
because their values are ignored, since `ACPI_FADT_WBINVD` is set in
`fadt->flags`.
- `fadt->duty_offset` is set to 0 instead of 1. None of the existing
boards indicate support for changing the processor duty cycle (as
`fadt->duty_width` is set to 0), so `fadt->duty_offset` does not
currently need to be set.
- Access sizes of registers are set.
- On mb/intel/baskingridge, the pmbase is now read using the common
function `get_pmbase()` instead of `pci_read_config16(...)`.
- On mb/intel/baskingridge, the value of `fadt->x_gpe0_blk.bit_width`
changes from 64 to 128. The correct value should be 128 (bits), to
match `fadt->gpe0_blk_len`, which is set to 16 (bytes).
- On Lynx Point LP systems, the unused extended address
`fadt->x_gpe0_blk` sets its address space ID to be consistent with
other unused extended addresses. Such a change should not alter the
interpretation of the registers as being unused. Why not set them all
to zero? Simply because the existing practice, in both coreboot and
some other vendors' firmware, has them set in such a case.
A diff of the FADT from a Google Peppy board is below:
--- pre/facp.dsl 2018-10-30 20:14:52.676570798 +1300
+++ post/facp.dsl 2018-10-30 20:15:06.904381436 +1300
@@ -1,179 +1,179 @@
/*
* Intel ACPI Component Architecture
* AML/ASL+ Disassembler version 20180810 (64-bit version)
* Copyright (c) 2000 - 2018 Intel Corporation
*
- * Disassembly of facp.dat, Tue Oct 30 20:14:52 2018
+ * Disassembly of facp.dat, Tue Oct 30 20:15:06 2018
*
* ACPI Data Table [FACP]
*
* Format: [HexOffset DecimalOffset ByteLength] FieldName : FieldValue
*/
[000h 0000 4] Signature : "FACP" [Fixed ACPI Description Table (FADT)]
[004h 0004 4] Table Length : 000000F4
[008h 0008 1] Revision : 04
-[009h 0009 1] Checksum : 61
+[009h 0009 1] Checksum : 6E
[00Ah 0010 6] Oem ID : "CORE "
[010h 0016 8] Oem Table ID : "COREBOOT"
[018h 0024 4] Oem Revision : 00000000
[01Ch 0028 4] Asl Compiler ID : "CORE"
-[020h 0032 4] Asl Compiler Revision : 00000001
+[020h 0032 4] Asl Compiler Revision : 00000000
[024h 0036 4] FACS Address : 7BF46240
[028h 0040 4] DSDT Address : 7BF46280
-[02Ch 0044 1] Model : 01
+[02Ch 0044 1] Model : 00
[02Dh 0045 1] PM Profile : 02 [Mobile]
[02Eh 0046 2] SCI Interrupt : 0009
[030h 0048 4] SMI Command Port : 000000B2
[034h 0052 1] ACPI Enable Value : E1
[035h 0053 1] ACPI Disable Value : 1E
[036h 0054 1] S4BIOS Command : 00
[037h 0055 1] P-State Control : 00
[038h 0056 4] PM1A Event Block Address : 00001000
[03Ch 0060 4] PM1B Event Block Address : 00000000
[040h 0064 4] PM1A Control Block Address : 00001004
[044h 0068 4] PM1B Control Block Address : 00000000
[048h 0072 4] PM2 Control Block Address : 00001050
[04Ch 0076 4] PM Timer Block Address : 00001008
[050h 0080 4] GPE0 Block Address : 00001080
[054h 0084 4] GPE1 Block Address : 00000000
[058h 0088 1] PM1 Event Block Length : 04
[059h 0089 1] PM1 Control Block Length : 02
[05Ah 0090 1] PM2 Control Block Length : 01
[05Bh 0091 1] PM Timer Block Length : 04
[05Ch 0092 1] GPE0 Block Length : 20
[05Dh 0093 1] GPE1 Block Length : 00
[05Eh 0094 1] GPE1 Base Offset : 00
[05Fh 0095 1] _CST Support : 00
[060h 0096 2] C2 Latency : 0001
[062h 0098 2] C3 Latency : 0057
-[064h 0100 2] CPU Cache Size : 0400
-[066h 0102 2] Cache Flush Stride : 0010
-[068h 0104 1] Duty Cycle Offset : 01
+[064h 0100 2] CPU Cache Size : 0000
+[066h 0102 2] Cache Flush Stride : 0000
+[068h 0104 1] Duty Cycle Offset : 00
[069h 0105 1] Duty Cycle Width : 00
[06Ah 0106 1] RTC Day Alarm Index : 0D
[06Bh 0107 1] RTC Month Alarm Index : 00
[06Ch 0108 1] RTC Century Index : 00
[06Dh 0109 2] Boot Flags (decoded below) : 0003
Legacy Devices Supported (V2) : 1
8042 Present on ports 60/64 (V2) : 1
VGA Not Present (V4) : 0
MSI Not Supported (V4) : 0
PCIe ASPM Not Supported (V4) : 0
CMOS RTC Not Present (V5) : 0
[06Fh 0111 1] Reserved : 00
[070h 0112 4] Flags (decoded below) : 00008CAD
WBINVD instruction is operational (V1) : 1
WBINVD flushes all caches (V1) : 0
All CPUs support C1 (V1) : 1
C2 works on MP system (V1) : 1
Control Method Power Button (V1) : 0
Control Method Sleep Button (V1) : 1
RTC wake not in fixed reg space (V1) : 0
RTC can wake system from S4 (V1) : 1
32-bit PM Timer (V1) : 0
Docking Supported (V1) : 0
Reset Register Supported (V2) : 1
Sealed Case (V3) : 1
Headless - No Video (V3) : 0
Use native instr after SLP_TYPx (V3) : 0
PCIEXP_WAK Bits Supported (V4) : 0
Use Platform Timer (V4) : 1
RTC_STS valid on S4 wake (V4) : 0
Remote Power-on capable (V4) : 0
Use APIC Cluster Model (V4) : 0
Use APIC Physical Destination Mode (V4) : 0
Hardware Reduced (V5) : 0
Low Power S0 Idle (V5) : 0
[074h 0116 12] Reset Register : [Generic Address Structure]
[074h 0116 1] Space ID : 01 [SystemIO]
[075h 0117 1] Bit Width : 08
[076h 0118 1] Bit Offset : 00
-[077h 0119 1] Encoded Access Width : 00 [Undefined/Legacy]
+[077h 0119 1] Encoded Access Width : 01 [Byte Access:8]
[078h 0120 8] Address : 0000000000000CF9
[080h 0128 1] Value to cause reset : 06
[081h 0129 2] ARM Flags (decoded below) : 0000
PSCI Compliant : 0
Must use HVC for PSCI : 0
[083h 0131 1] FADT Minor Revision : 00
[084h 0132 8] FACS Address : 000000007BF46240
[08Ch 0140 8] DSDT Address : 000000007BF46280
[094h 0148 12] PM1A Event Block : [Generic Address Structure]
[094h 0148 1] Space ID : 01 [SystemIO]
[095h 0149 1] Bit Width : 20
[096h 0150 1] Bit Offset : 00
-[097h 0151 1] Encoded Access Width : 00 [Undefined/Legacy]
+[097h 0151 1] Encoded Access Width : 02 [Word Access:16]
[098h 0152 8] Address : 0000000000001000
[0A0h 0160 12] PM1B Event Block : [Generic Address Structure]
[0A0h 0160 1] Space ID : 01 [SystemIO]
[0A1h 0161 1] Bit Width : 00
[0A2h 0162 1] Bit Offset : 00
[0A3h 0163 1] Encoded Access Width : 00 [Undefined/Legacy]
[0A4h 0164 8] Address : 0000000000000000
[0ACh 0172 12] PM1A Control Block : [Generic Address Structure]
[0ACh 0172 1] Space ID : 01 [SystemIO]
[0ADh 0173 1] Bit Width : 10
[0AEh 0174 1] Bit Offset : 00
-[0AFh 0175 1] Encoded Access Width : 00 [Undefined/Legacy]
+[0AFh 0175 1] Encoded Access Width : 02 [Word Access:16]
[0B0h 0176 8] Address : 0000000000001004
[0B8h 0184 12] PM1B Control Block : [Generic Address Structure]
[0B8h 0184 1] Space ID : 01 [SystemIO]
[0B9h 0185 1] Bit Width : 00
[0BAh 0186 1] Bit Offset : 00
[0BBh 0187 1] Encoded Access Width : 00 [Undefined/Legacy]
[0BCh 0188 8] Address : 0000000000000000
[0C4h 0196 12] PM2 Control Block : [Generic Address Structure]
[0C4h 0196 1] Space ID : 01 [SystemIO]
[0C5h 0197 1] Bit Width : 08
[0C6h 0198 1] Bit Offset : 00
-[0C7h 0199 1] Encoded Access Width : 00 [Undefined/Legacy]
+[0C7h 0199 1] Encoded Access Width : 01 [Byte Access:8]
[0C8h 0200 8] Address : 0000000000001050
[0D0h 0208 12] PM Timer Block : [Generic Address Structure]
[0D0h 0208 1] Space ID : 01 [SystemIO]
[0D1h 0209 1] Bit Width : 20
[0D2h 0210 1] Bit Offset : 00
-[0D3h 0211 1] Encoded Access Width : 00 [Undefined/Legacy]
+[0D3h 0211 1] Encoded Access Width : 03 [DWord Access:32]
[0D4h 0212 8] Address : 0000000000001008
[0DCh 0220 12] GPE0 Block : [Generic Address Structure]
-[0DCh 0220 1] Space ID : 00 [SystemMemory]
+[0DCh 0220 1] Space ID : 01 [SystemIO]
[0DDh 0221 1] Bit Width : 00
[0DEh 0222 1] Bit Offset : 00
[0DFh 0223 1] Encoded Access Width : 00 [Undefined/Legacy]
[0E0h 0224 8] Address : 0000000000000000
[0E8h 0232 12] GPE1 Block : [Generic Address Structure]
[0E8h 0232 1] Space ID : 01 [SystemIO]
[0E9h 0233 1] Bit Width : 00
[0EAh 0234 1] Bit Offset : 00
[0EBh 0235 1] Encoded Access Width : 00 [Undefined/Legacy]
[0ECh 0236 8] Address : 0000000000000000
Change-Id: I9638bb5ff998518eb750e3e7e85b51cdaf1f070e
Signed-off-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-on: https://review.coreboot.org/29387
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
With this change, coreboot thinks we're running at 1MHz:
DW I2C bus 2 at 0xd1133000 (1000 KHz)
Elan eKT3644 IC Specification (trackpad) requires:
Low Time larger than 500ns (61 * 8.3ns = 506ns).
High Time larger than 260ns (32 * 8.3ns = 265ns),
Data Hold_time larger than 0ns.
Start Condition Hold time larger than 250ns.
Rise/Fall time of less than 120ns.
HCNT controls both High Time and Start Condition Hold time.
LCNT controls Low Time.
SDA_HOLD controls Data Hold Time.
P2 Atlas "Rise time" is 90ns and "Fall time" is 32ns and tuned
using resistors on the board and must be considered when
adjusting any of the parameters since these times are all measured
at 30 or 70% of base and peak voltages (0v/1.8v).
The eKT3644 requirements are met with LCNT=69, HCNT=33, SDA_HOLD=20
which yields the SCL at around 950KHz - suboptimal but compliant.
Lower LCNT or HCNT results in "lost arbitration" errors or not complying
with eKT3644 requirements.
Verified by gaggery.tsai@intel.corp-partner.google.com.
Scope shots posted here:
https://b.corp.google.com/issues/78601949#comment177
BUG=b:78601949
BRANCH=none
TEST=Farzam provided test points on track pad for SCL/SDA/GND.
Waveforms measured with oscilloscope and screen shots attached
to bug (comment #177, #155, #100).
Operate trackpad/touchscreen
Review dmesg (kernel) output for correct speed, parameters, and
no errors (e.g. "lost arbitration" or "host controller timeout")
Change-Id: Iaf42ba7b8818b7cd9c8dcc657823dac705659d38
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Signed-off-by: Grant Grundler <grundler@chromium.org>
Tested-by: gaggery.tsai@intel.corp-partner.google.com
Tested-by: grundler@chromium.org
Reviewed-on: https://review.coreboot.org/29553
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Gaggery Tsai <gaggery.tsai@intel.com>
|
|
Enable HDA controller coreboot driver for Whiskey Lake RVP platform on
top of common code.
BUG=N/A
TEST=Build and boot up on whiskey lake rvp board, comfirm audio playback
is working.
Change-Id: I7daf1c741b92ff59b9cb4030d218e9c1054c4b79
Signed-off-by: Krzysztof Sywula <krzysztof.m.sywula@intel.com>
Reviewed-on: https://review.coreboot.org/28781
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
|
|
Change-Id: I1ec6f0687083c17314588c85af289b4b27c5441c
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/29598
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I7019d70b7e6f8ae041a12d6bab83127e9e70868c
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/29597
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: Ic4ea1d681d2677880b155713c34152ac0861146b
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/29621
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I9f4640ef040dc6a1d39ecb8b3378266e4dd5cec9
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/29619
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I4cf5cd1d3bed7188590e4f143d8f14dc9e58b183
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/29610
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Change-Id: I2296ab3c53a82ee990649e35e1370e1dd304e392
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/29600
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
