aboutsummaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2021-04-20soc/amd/{common,cezanne}: Add uPEP deviceRaul E Rangel
The uPEP device is required to support S0i3. The device has been written in ASL to make it easier to read and maintain. The device constraints are purely informational. We use a dummy constraint like the Intel platforms to keep both linux and Windows functional. In order for this device to be used by the linux kernel the ACPI_FADT_LOW_PWR_IDLE_S0 flag must be set. So including it unconditionally doesn't cause any problems. The AMD Modern Standby BIOS Implementation Guide defines two UUIDs, one for getting the device constraints, and one for handling notifications. This differs from the Intel specification and the linux driver implementation. For this reason I haven't implemented any of the notification callbacks yet. BUG=b:178728116 TEST=Boot OS and verify _DSM is called: [ 0.226701] lps0_device_attach: ACPI: \_SB_.PEP_: _DSM function mask: 0x3 [ 0.226722] lpi_device_get_constraints_amd: ACPI: \_SB_.PEP_: _DSM function 1 eval successful [ 0.226723] lpi_device_get_constraints_amd: ACPI: \_SB_.PEP_: LPI: constraints list begin: [ 0.226724] lpi_device_get_constraints_amd: ACPI: \_SB_.PEP_: LPI: constraints list end Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I2deef47eabe702efe1a0f3747c9f27bcec37464b Reviewed-on: https://review.coreboot.org/c/coreboot/+/52445 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-19device/azalia_device.c: Add option to lock down GCAPAngel Pons
On Intel 6-series PCHs, the GCAP register is R/WO (Read / Write Once), and needs to be written to after the HD Audio controller is taken out of reset. Add a Kconfig option to read and write back GCAP in order to lock it down. Follow-up commits will select this option when switching platforms to use common Azalia code, to preserve original behaviour. Change-Id: I70bab20816fb6c0bf7bff35c3d2f5828cd96172d Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50794 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-04-19soc/intel/common/block/smm: Drop stale commentAngel Pons
This comment is most likely a copy-paste leftover from Braswell. Change-Id: I49bfa3cc56539df0b47d2e2bd74b2bfc45421034 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52500 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-04-19mb/clevo/cml-u/Kconfig: Use BOARD_CLEVO_L140CU_BASEFelix Singer
To make the L140CU able to be selected by other OEMs, use BOARD_CLEVO_L140CU_BASE for OEM independent options. BOARD_CLEVO_L140CU represents the standard Clevo mainboard without any OEM modifications, while BOARD_CLEVO_L140CU_BASE is used for the baseboard. Change-Id: Iee82eadebfc851619dbb64de09283c5ee55a499f Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52241 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-19mb/amd/majolica: use GPIO_40 as reset pin for NVME SSDNikolai Vyssotski
Default Majolica configuration uses GPIO_40 for NVME M2_SSD_RST# BUG=b:182100027 TEST=ls /dev/nvme* Change-Id: Idecc0ec7eaf903b29fea109d3688f3c249da62f5 Signed-off-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52423 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-04-19lib/rtc: Fix incomplete leap year macroJakub Czapiga
Signed-off-by: Jakub Czapiga <jacz@semihalf.com> Found-by: Paul Fagerburg <pfagerburg@chromium.org> Change-Id: Ic434c969141c67ce317a5db0c8805de02c84eb08 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52370 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2021-04-19sb/intel/common: Drop some PCH_LPC_DEV macrosAngel Pons
The macro definitions depend on __SIMPLE_DEVICE__ and are only used in the get_gpio_base() or lpc_get_pmbase() functions, which already guard PCH_LPC_DEV usage using __SIMPLE_DEVICE__ in preprocessor. Change-Id: I5d3681debe29471dfa143ba100eb9060f6364c93 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52461 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-04-19soc/intel/baytrail/pmutil.c: Define __SIMPLE_DEVICE__Angel Pons
Change-Id: I0d5fa4451b356970cf9843a76d0fa4d2af4307da Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52460 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2021-04-19soc/intel/braswell/pmutil.c: Define __SIMPLE_DEVICE__Angel Pons
Change-Id: I2caa9cbb812e17f041c15654aef756e41fb71398 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52459 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2021-04-19soc/intel/common/block/pcr: Define __SIMPLE_DEVICE__Angel Pons
Change-Id: I06f9c623947e48a7213e42507f4da51c12b425d7 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52458 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-04-19soc/intel/cannonlake/elog.c: Define __SIMPLE_DEVICE__Angel Pons
Change-Id: Ie2f02b9934d843c29d17a72a6bf3b2bae91ce8d1 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52457 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-04-19soc/intel/braswell/smbus.c: Define __SIMPLE_DEVICE__Angel Pons
Change-Id: Ic16fd74d4ddf96e29bcdada671dab0e590af74ef Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52456 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2021-04-19mb/clevo/cml-u: Rename `BOARD_CLEVO_L140CU_OPTIONS`Felix Singer
Rename `BOARD_CLEVO_L140CU_OPTIONS` to `BOARD_CLEVO_L140CU_BASE` to make clear that this option represents the baseboard. Change-Id: I76690626fddafc8e3c37ef760aeb4f064fb6b591 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52480 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-19mb/clevo/kbl-u: Move memory init config to variant levelFelix Singer
Memory init config is board specific. Thus, move it to variant level and hook up variant romstage.c. Change-Id: Id78788815ad9c4ed64f0172fb746ff6e50d608ef Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49132 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-04-19mb/clevo/kbl-u: Clean up codeFelix Singer
Change-Id: I98d806ebf126522689b2c101b75add733825fcf1 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49133 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-04-19mb/clevo/l140cu: Move FSP-M config hook to mainboard levelFelix Singer
Hook up FSP-M configuration on mainboard level instead of variant level being able to do common configuration there. Also, hook up variant romstage.c on mainboard level for variant specific configurations. Change-Id: Ic161f83cb629b1e70ca670e10975a25bc0949656 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49077 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-04-19soc/intel/common/block/smbus: Define __SIMPLE_DEVICE__Angel Pons
Change-Id: I93f7918763d87f8fb50f39f9469694e73aeff37b Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52455 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-04-19drivers/intel/mipi_camera: Adding support for low power camera probeSugnan Prabhu S
Add a new configuration low_power_probe to avoid camera privacy LED blink during the boot. Change-Id: I27d5c66fb380ae6cd76d04ee82b7736407dac1b0 Signed-off-by: Pandya, Varshit B <varshit.b.pandya@intel.com> Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52189 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-19mainboard/ocp/tiogapass: Remove redundant PARALLEL_MP_AP_WORKMarc Jones
PARALLEL_MP_AP_WORK is set in the xeon_sp Kconfig. No need to set it here. Change-Id: I66d59fd7cbc3617eb739fdf2f3750f20ee701fbd Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52448 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-04-19cpu/x86/smm/smm_module_loaderv2.c: Rename fileArthur Heymans
As v1 was dropped, rename v2. Change-Id: I4dd51804e9391284c7624c42ad8180a14b1a4c84 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51528 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-04-19cpu/x86/smm: Drop the V1 smmloaderArthur Heymans
Change-Id: I536a104428ae86e82977f2510b9e76715398b442 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51187 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-04-19cpu/x86/smm_loaderv2: Use the permanent stack top during relocationArthur Heymans
Use the same stack location during relocation as for the permanent handler. When the number of CPUs is too large the stacks during relocation don't fit inside the default SMRAM segment at 0x30000. Currently the code would just let the CPU stack base grow downwards outside of the default SMM segment which would corrupt lower memory if S3 is implemented. Also update the comment on smm_module_setup_stub(). Change-Id: I6a0a890e8b1c2408301564c22772032cfee4d296 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51186 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-04-19Revert "mb/google/mancomb: Enable early EC Software Sync"Karthikeyan Ramasubramanian
This reverts commit 800193414148d5f39be42110fc2c76ad1ceb7d2f. EC software sync needs to be enabled in payload once the EFS2 requirements are met. BUG=b:185277224 TEST=Build. Cq-Depend: chromium:2829948 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: Ib22a89e221e1e057d82ef76b7008e5d3f14df5e7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52451 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-19Revert "soc/amd/cezanne: Add support to perform early EC sync"Karthikeyan Ramasubramanian
This reverts commit ad7c33abd21dfdde75c6ffa23c31cbe46826d2d5. With EFS2 already enabled in EC, enabling early EC sync is not required. Also a workaround has been added in payload to address any boot issues. BUG=b:185277224 TEST=Build and boot to OS in Guybrush in both normal and recovery mode. Cq-Depend: chromium:2832032 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I34f8433739754365c8e5a10fdf7e58e3d1e7e797 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52419 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-19Revert "mb/google/guybrush: Enable early EC Software Sync"Karthikeyan Ramasubramanian
This reverts commit 1e36dc078e4012f884d67a32f1faac5f80406285. With EFS2 already enabled in EC, enabling early EC sync is not required. Also a workaround has been added in payload to address any boot issues. BUG=b:185277224 TEST=Build and boot to OS in Guybrush in both normal and recovery mode. Cq-Depend: chromium:2832032 Change-Id: I921dc5c814e5187dce283eeff43075b59885723a Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52418 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-18mb/google/hatch: Guard ChromeOS fmd selection on CHROMEOSMatt DeVillier
Ensure the ChromeOS FMAPs are used only when CONFIG_CHROMEOS is selected, so non-ChromeOS targets use the default x86 FMAP. Change-Id: Id5d3e7a44973f2fadba3ea15e0e544eee7fa53e6 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52386 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-04-18mb/google/mancomb: Remove PS/2 mouse configEric Lai
Sync from guybrush. BUG=b:182211161 TEST=builds Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I02b375b6fc134e56b7f55e1421f694daa4aa994d Reviewed-on: https://review.coreboot.org/c/coreboot/+/52407 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-18mb/google/guybrush/var/guybrush: Add GPIO override tableKarthikeyan Ramasubramanian
EN_SPKR is routed to SD pin in the ALC1019 speaker amplifier. The concerned pin has a voltage rating of 1.8V whereas the EN_SPKR GPIO has a voltage rating of 3.3 V. The schematics has been updated to bridge the gap. So enable the speaker amplifier by default and add a gpio override table to disable the speakers before board version 2. Also update the codec ACPI HID name for the kernel machine driver to probe the codec successfully. BUG=b:182960979 TEST=Build and boot to OS in guybrush. Ensure that the GPIO output state is high. Change-Id: I32b29bfae9bc94b5119b33a535d8bc825ef89445 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52355 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Mathew King <mathewk@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-18mb/google/guybrush: Enable AMD I2S Machine DriverKarthikeyan Ramasubramanian
Enable AMD I2S machine driver and configure the devicetree with HID information so that the machine driver ACPI objects can be passed to the kernel. BUG=b:182960979 TEST=Build and boot to OS in guybrush. Ensure that the ACPI objects for machine driver is populated. Change-Id: I8ed474d25273082d1e0742ba93746d97930deb19 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52394 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-04-18drivers/amd/i2s_machine_dev: Make DMIC select gpio optionalKarthikeyan Ramasubramanian
The selector component in Sound Open Firmware (SOF) can consume all the mics and use the configuration in the Use Case Manager (UCM) to select the right channel. Hence dmic select gpio configuration is optional. BUG=b:182960979 TEST=Build and boot to OS in Guybrush. Ensure that the machine driver ACPI object is populated without DMIC select GPIO. Change-Id: Iba00b07c3656c487e33bab184fefee7037745e2d Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52393 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-18soc/amd/cezanne/Kconfig: add missing ACPI_BERT and ACPI_BERT_SIZEFelix Held
ACPI_BERT_SIZE is used in the FSP driver and the fsp_m_params.c. The latter one is planned to be deprecated though. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Id1a250defbd31e255df9b7a7dd8488dc3182649b Reviewed-on: https://review.coreboot.org/c/coreboot/+/52385 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-04-18soc/intel/cnl and mainboards: Drop `cnl_configure_pads()`Furquan Shaikh
CB:31250 ("soc/intel/cannonlake: Configure GPIOs again after FSP-S is done") introduced a workaround in coreboot for `soc/intel/cannonlake` platforms to save and restore GPIO configuration performed by mainboard across call to FSP Silicon Init (FSP-S). This workaround was required because FSP-S was configuring GPIOs differently than mainboard resulting in boot and runtime issues because of misconfigured GPIOs. This issue has since been fixed in FSP (verified with FSP v1263 on hatch). However, there were still 4 boards in coreboot using `cnl_configure_pads()`. As part of RFC CB:50829, librem_cnl, clevo/cml-u and system76/lemp9 were tested to ensure that this workaround is no longer required. This change drops the workaround using `cnl_configure_pads()` and updates all mainboards to use `gpio_configure_pads()` instead. Signed-off-by: Furquan Shaikh <furquan@google.com> Tested-by: Angel Pons <th3fanbus@gmail.com> (Tested purism/librem_cnl) Tested-by: Michael Niewöhner <foss@mniewoehner.de> (Tested clevo/cml-u which is similar to system76/lemp9) Change-Id: I7a4facbf23fc81707cb111859600e641fde34fc4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52248 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-18mb/purism/librem_14: Update GPIO configMatt DeVillier
Update GPIO config based on review of latest schematics: - LAN/WLAN reset lines are NC - SDIO lines configured via GPP_G0-G7 - DMIC lines are wired directly to codec, not PCH, so GPP_D17-20 are set to NC - Pads GPP_H0-H3 are configured for I2S2 - Pads GPP_H7-H9 are straps for board revision, so treated as GPI - CPU_C10_GATE# is NC - PWRBTN# does not need an internal pull-up - GPP_C20-23 are configured for M.2 UART - SATAXPCIE1/2 and EC SCI/SMI lines do not need internal pull ups - GPP_C6/C7 set to I2C1 for future use - GPP_E15 changed from SCI to SMI, edge triggered Change-Id: If113cfeadf093e10dd84ab827ead594088f02ba1 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52389 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-18mb/purism/librem_14: Remove all PU/PD from NC GPIO padsMatt DeVillier
When a pad is configured as NC, it is set as a GPI with both TX and RX disabled, and as the pad is internally disconnected, no pull up or pull down is needed. Change-Id: Id551b8f6f5b8c772e17670b8b728b5e890ef0b21 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52388 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-18mb/google/guybrush/var/guybrush: Add FPMCU configrationIvy Jian
Enable CRFP in devicetree and configure GPIOs. BUG=b:182201937 BRANCH=None TEST=Boot into OS and confirm FPMCU is responding. Signed-off-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com> Change-Id: I7c56b0db193be6804d07c2f333445c2a1dbf9f59 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52181 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-04-18src/drivers/ipmi: Add DEBUG_IPMI optionMarc Jones
IPMI debug was extra spewy, so add a debug option as SPI and other drivers have when they need to be debugged. Change-Id: I788d67c242cac23bde9750aa3e95e3276c3f1fd7 Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52449 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-04-18device/Kconfig: Adapt PCIEXP_HOTPLUG_BUSESNico Huber
The default of 32 buses per hotplug bridge is rather high. Especially for platforms that limit MMConf space to 64 buses: they run out of numbers if there is more than a single hotplug bridge. Lower the default to * 8 if MMConf is limited to 64 or less buses, * 16 if MMConf is limited to 128 or less buses. Change-Id: I06d522dd92ceea9f4798273b26f947a5333800c3 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52069 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-18soc/intel/xeon_sp: Set SATA REGLOCKsMarc Jones
Set the SATA and SSATA REGLOCK as indicated by the Intel documentation. Change-Id: I90e6d0e3b5a38bcd5392e26cbbb6dc4aa6a8304b Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52162 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-04-18mainboard/ocp/deltalake: Add SATA device to device treeMarc Jones
Add the SATA device to the device tree so it may be found when trying to write SATA registers. Otherwise, it fails on "requests hidden 00:17.0 PCI: dev is NULL!" Change-Id: Ia309805ffd6e97d04b5cf4a0344eaac4c4d0adb6 Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52161 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-04-18soc/intel/xeon_sp: Set MSR locksMarc Jones
Set MSR locks as indicated by the Intel documents. The following MSRs settings are locked: MSR_FEATURE_CONFIG AES enable/disable lock TURBO_ACTIVATION_RATIO_LOCK This also adds PARALLEL_MP_AP_WORK to enable running on APs to set each CPU MSR. Change-Id: Iacf495f0880d42b378cb0d2c37940d50a511c430 Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52160 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-04-18Revert "drivers/spi: Stop using a variable-length array"Angel Pons
This reverts commit 59626b8670da326ab725e67b01dd1025b0a34a86. Reason for revert: Reported to cause boot-loops. Reason unknown. Change-Id: Id7f6211aaaf0401017176f63a17763f28d2744c8 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52424 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-17mb/prodrive/hermes: Fix SSDT MPTSPatrick Rudolph
MPTS is currently not executed by the AML interpreter. Use Method (\\_SB.MPTS) instead of Scope (\\_SB) Method (MPTS) ScopeEnd Tested on Prodrive Hermes. MPTS is now executed at S5. Change-Id: I9074eb4ba55aab3f9a47ae5e3c3ddd338406a5e4 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52382 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: <wouter.eckhardt@prodrive-technologies.com>
2021-04-16psp_verstage: move svc to platform-specific dirKangheui Won
Since there are some differences between picasso PSP svc and cezanne PSP svc, each platform should have their own svc wrapper. Moreover cezanne PSP will drop unused parameters from update_psp_bios_dir and save_uapp_data so make wrapper around it. BUG=b:182477057 BRANCH=none TEST=build psp_verstage and boot on zork Signed-off-by: Kangheui Won <khwon@chromium.org> Change-Id: I69f998865fc3184ea8900a431924a315c5ee9133 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52307 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-16soc/amd: move psp_verstage to amd/commonKangheui Won
psp_verstage is not specific to picasso. There might be picasso-specific code but move everything into common as a first step. While developing psp_verstage for cezanne picasso-specific code will move back to picasso directory. BUG=b:182477057 BRANCH=none TEST=build psp_verstage on zork Signed-off-by: Kangheui Won <khwon@chromium.org> Change-Id: Ifb1df0d82b972f28be2ffebd476c2553cbda9810 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52306 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2021-04-16soc/intel/common/gpio: Implement GPIO snapshot/verify callbacksFurquan Shaikh
This change implements `gpio_snapshot()` and `gpio_verify_snapshot()` callbacks that are useful for debugging any GPIO configuration changes across FSP-S. These can be utilized by all Intel SoCs that make use of the common block GPIO driver. Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I82a1f125c490b9d6e26e6e9527c2fcd55bb9d429 Reviewed-on: https://review.coreboot.org/c/coreboot/+/50990 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-04-16drivers/intel/fsp2_0: Add support to identify GPIO config changesFurquan Shaikh
Traditionally, for each Intel platform using FSP, FSP-S has at some point configured GPIOs differently than the mainboard configuration in coreboot. This has resulted in various side-effects in coreboot, payload and OS because of misconfigured GPIOs. On more recent Intel platforms, a UPD `GpioOverride` is added that coreboot can use to ensure that FSP does not touch any GPIO configuration. This change adds a debug option `CHECK_GPIO_CONFIG_CHANGES` to fsp2_0 driver in coreboot that makes a platform callback `gpio_snapshot` to snapshot GPIO configuration before making a call to FSP SiliconInit and Notify phases. This snapshot is then compared against the GPIO configuration using platform callback `gpio_verify_snapshot` after returning from FSP. The callbacks are not added to romstage (FSP-M) because mainboard configures all pads in ramstage. This debug hook allows developers to dump information about any pads that have a different configuration after call to FSP in ramstage. It is useful to identify missed UPD configurations or bugs in FSP that might not honor the UPDs set by coreboot. This debug hook expects the platform to implement the callbacks `gpio_snapshot` and `gpio_verify_snapshot`. These can be implemented as part of the common GPIO driver for platforms using FSP2.0+. Platforms that implement this support must select the config `HAVE_GPIO_SNAPSHOT_VERIFY_SUPPORT` to make the debug config `CHECK_GPIO_CONFIG_CHANGES` visible to user. Proposal for the GPIO snapshot/verify support was discussed in the RFC CB:50829. Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I5326fc98b6eba0f8ba946842253b288c0d42c523 Reviewed-on: https://review.coreboot.org/c/coreboot/+/50989 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-16mb/google/guybrush: Enable backlight in the OSMartin Roth
Add ACPI code to enable the backlight when we enter the OS. BUG=b:184198808 TEST=Backlight enabled in the OS Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I3e0a6c06120ac5abf0a0d82494e03d9cf80c1f8c Reviewed-on: https://review.coreboot.org/c/coreboot/+/52113 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-16soc/amd/common: Correct Kconfig enable for ACPI GPIO functionsMartin Roth
The Kconfig value specified Intel instead of AMD. BUG=b:184198808 TEST=Backlight enabled in the OS Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I9fbdf821591ec886f383c1a5ac197f8f213c4cc4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52384 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-16mb/google/zork: Configure HID over I2C related GPIO as level-triggeredVictor Ding
Both touchpads supported by zork use level-triggered wakeup signal. BRANCH=zork BUG=b:172846122,b:182911201 TEST=1. cros build-ap -b zork 2. both Synaptics and ELAN touchpads work fine on Vilboz 3. Wakeup source is correctly reported on Vilboz Signed-off-by: Victor Ding <victording@google.com> Change-Id: Icc2b5ad3bd434c9759a0fdfc121aa3c94f46630e Reviewed-on: https://review.coreboot.org/c/coreboot/+/52367 Reviewed-by: Sam McNally <sammc@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-16mb/google/zork: Configure IRQs as level triggered for ELAN touchpadVictor Ding
Based on the datasheet provided by ELAN, the /INT pin is "low active" and "indicates touchpad likes to send data to system(host) when low". The signal is level-triggered. BRANCH=zork BUG=b:172846122 TEST=cros build-ap -b zork Signed-off-by: Victor Ding <victording@google.com> Change-Id: I1f2182aaf483932304591ab14592f35214ea6efd Reviewed-on: https://review.coreboot.org/c/coreboot/+/52366 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Kangheui Won <khwon@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-16vendorcode/intel/fsp: Add Alder Lake FSP headers for FSP v2117_00Ronak Kanabar
The headers added are generated as per FSP v2117_00. Previous FSP version was v2081_02. Changes Include: - Adjust Reserved UPD Offset in FspmUpd.h and FspsUpd.h - Remove FivrFaults and FivrEfficiency Upds from FspmUpd.h - Few UPDs description update in FspmUpd.h and FspsUpd.h BUG=b:184129128 BRANCH=None TEST=Build and boot ADLRVP Change-Id: I068552084b1ef3e5c4fba7a46240d116c92c7b5b Cq-Depend: TBD Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51977 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-04-16mb/system76/lemp9: correct pad GPP_A11 (INTP_OUT)Michael Niewöhner
This pad is connected to INTP_OUT of the Type-C PD controller. Correct the comment. Also remove the unneeded pull-up. Checked with schematics. Change-Id: I16a769ac6a2d54da700ddb45bd9c7c84383a43dd Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52171 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Tim Crawford <tcrawford@system76.com>
2021-04-16mb/clevo/cml-u/l140cu: correct pad GPP_A11 (INTP_OUT)Michael Niewöhner
This pad is connected to INTP_OUT of the Type-C PD controller. Correct the comment. Also remove the unneeded pull-up. Checked with schematics. Change-Id: I33a5f177affc3f13d091a85073499b7283f54ada Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52169 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-04-16soc/intel/xeon_sp: More PCU locksMarc Jones
Add the following locks as recommended by the Intel docs: DRAM_POWER_INFO_LOCK PCU_CR3_FLEX_RATIO_LOCK TURBO_ACTIVATION_RATIO_LOCK PCU_CR0_PMAX_LOCK Change-Id: I8d8211977e87109a91790a4070454fc561aa761b Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52060 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2021-04-16soc/intel/xeon_sp: Call SMM finalizeMarc Jones
Call the SMM finalize SMI. Adds SMM_FEATURE_CONTROL setting to enable MCHK on code fetch outside SMRR and the register lock as recommended by the BWG. Change-Id: Ie3b58d35c7a62509e39e393514012d1055232d32 Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51651 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Rocky Phagura Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-16soc/intel/common/block/fast_spi: Add flash PRR34 lockMarc Jones
Set the flash PRR3 and PRR4 lock to be set with SPI FLOCKDN. Change-Id: I288eea3e0e853e5067c5af23e22eab79330c0f20 Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51779 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-16mb/google/dedede/var/galith: support Audio AMP I2C/Auto modeFrankChu
support audio AMP selection with fw_config. BUG=b:185082705 BRANCH=dedede TEST=build pass Signed-off-by: FrankChu <frank_chu@pegatron.corp-partner.google.com> Change-Id: Ieb169c69a6716082dd218d05479bca46bbc09a3e Reviewed-on: https://review.coreboot.org/c/coreboot/+/52286 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-04-16mb/google/dedede: Add AUDIO_AMP FW_CONFIG in devicetreeFrankChu
Add AUDIO_AMP ports bit field in devicetree. UNPROVISIONED 0 MAX98360 1 RT1015_I2C 2 RT1015P_AUTO 3 BUG=b:185082705 BRANCH=dedede TEST=build pass Signed-off-by: FrankChu <frank_chu@pegatron.corp-partner.google.com> Change-Id: I54f1e44036857dc00df074c38fde0fa82e589320 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52317 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-16mb/portwell/m107/Kconfig: Reduce CBFS_SIZEFrans Hendriks
CBFS size equals flash size, leaving no space for descriptor and ME. Reduce CBFS_SIZE. BUG = N/A TEST = Build and boot Portwell M107 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Change-Id: Ida5a248edf4f602c4a106ae29d706e732ef8454f Reviewed-on: https://review.coreboot.org/c/coreboot/+/52155 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Erik van den Bogaert <ebogaert@eltan.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-04-16mb/facebook/fbg1701/Kconfig: Remove TPM_INIT_RAMSTAGEFrans Hendriks
TPM_INIT_RAMSTAGE needs to be enabled for measured boot only configuration. Remove TPM_INIT_RAMSTAGE disable. BUG = NA TEST = Boot possible combinations of VBOOT, measured boot and vendorcode security. Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Change-Id: I91bde691d445d4210429c928e90e16653092f1cb Reviewed-on: https://review.coreboot.org/c/coreboot/+/52051 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Erik van den Bogaert <ebogaert@eltan.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-04-16mb/google/dedede/var/storo:Add P-sensor for storoZanxi Chen
Modify GPIO_D22/D23/E11 configuration for P-sensor BUG=b:185214363 BRANCH=dedede TEST=built storo firmware and verified P-sensor function Change-Id: Ia2df1a227b04688a6b98384cd3a4e63023c0c1d9 Signed-off-by: Zanxi Chen <chenzanxi@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52315 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-04-16soc/amd/cezanne: Update FADT to support S0i3Jason Glenesk
Set ACPI_FADT_LOW_PWR_IDLE_S0 flag in FADT. BUG=b:178728116 TEST=Dump FACP and confirm Flags bits match expected. Change-Id: I59ef762a18903135f9daa902ba8d1e40c451e96c Signed-off-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com> Signed-off-by: Mathew King <mathewk@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52035 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-16soc/amd/cezanne: Add modern standby option to chip configMathew King
BUG=b:178728116 Change-Id: I0d09bd4361f5f47360daf750efbc993010804902 Signed-off-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com> Signed-off-by: Mathew King <mathewk@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52041 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-04-16mb/system76/whl-u: Add Darter Pro 5 variantTim Crawford
The darp5 has several GPIO differences to the galp3-c, which are already accounted for in gpio.c. Change-Id: I951e86e53e9c47b9f3038927f44e505d37200c26 Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51870 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-16soc/amd/cezanne: Port ACPI p-state and c-state entries from picassoJason Glenesk
Add generate_cpu_entries to device operations. Add support to generate cpu p-state and c-state SSDT entries. BUG=b:184151560 TEST=Dump and verify SSDT entry for CPU p-states and c-states. Change-Id: I77d8078b94fb661dc045b4184955c8cbec373d12 Signed-off-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com> Signed-off-by: Mathew King <mathewk@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52036 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-04-16soc/amd/cezanne: Add uart controllers to chipset.cbIvy Jian
Add uart controller to chipset.cb and leave it off by default. Turn uart0 on for console for mainboards. BUG=none TEST=builds and boot into OS Signed-off-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com> Change-Id: Iaeb7fea4b92bd89331c7ae7c1c000f8d9961fe9e Reviewed-on: https://review.coreboot.org/c/coreboot/+/52287 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-04-16mb/google/brya: Configure TCSS OC pins for bryaMaulik V Vaghela
TCSS OC pins has not been correctly configured for brya. This patch fills the value from devicetree to correct the OC pins mapping BUG=b:184653645 BRANCH=None TEST=check if UPD value has been reflected correctly Change-Id: Ia21cdbf5768ad7516ea52bff7e247291a7d2ebd1 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52321 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-04-16soc/intel/alderlake: Allow devicetree to fill UPD related to TCSS OCMaulik V Vaghela
We need to change OC pin for type C USB3 ports and it depends on the board design. Allowing it to be filled by devicetree will make it easier to change the mapping based on the board design BUG=b:184653645 BRANCH=None TEST=compilation works fine and value of UPD is getting reflected. Change-Id: I61faa661c12dced27c6cdd7005a61ae8de8621e1 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52320 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-04-16mb/intel/adlrvp: Enable ALC711 over SNDW0Sridhar Siricilla
The patch enables ALC711 over SNDW0. Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I43891b94728c8f2d644e14da11946fea3e4515aa Reviewed-on: https://review.coreboot.org/c/coreboot/+/50022 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
2021-04-16mb/google/octopus: Add log for ssfc update codecEric Lai
Add log to show the codec has been disabled. BUG=b:185193926 TEST=cbmem -c | grep disabled, can find the codec name Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I8ce7e435ce73beb2a5cbf5883905554227b1989b Reviewed-on: https://review.coreboot.org/c/coreboot/+/52314 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com>
2021-04-16soc/mediatek: Remove misleading memory logsYu-Ping Wu
When MRC cache region type is not found (for example, in recovery mode with !HAS_RECOVERY_MRC_CACHE), mrc_cache_stash_data() will return 0. Therefore, the platform code is not able to tell from the return value if the MRC cache data is actually written to flash or not. Since the MRC driver is already pretty verbose, ignore the return value and remove the misleading memory logs. BUG=none TEST=emerge-asurada coreboot BRANCH=asurada Change-Id: I6b411664ca91b9be2d4518a09e9734d26db02d6e Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52361 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-16mb/google/guybrush: Implement tis_plat_irq_statusRaul E Rangel
BUG=b:185397933 TEST=boot guybrush and no longer see tis_plat_irq_status warnings Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I9b67cb59221d4e355df8e8a2205e03ead7dba51f Reviewed-on: https://review.coreboot.org/c/coreboot/+/52352 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-04-16soc/amd/cezanne: Select VBNV_CMOSRaul E Rangel
Needed so we can switch to normal mode. BUG=b:184126844 TEST=Boot guybrush in developer mode and switch to normal mode. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I26ad160a2372484e9753a727f2b454a31e3537a0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52224 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-04-16mb/google/{guybrush,mancomb}: Add VBOOT_VBNV_OFFSETRaul E Rangel
This is the same as zork. BUG=b:184126844 TEST=Boot guybrush in developer mode and switch to normal mode. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ib11c255ab7e937de334ecd18dc030006f7724275 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52354 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-04-16mb/google/guybrush: Sort VBOOT_EARLY_EC_SYNCRaul E Rangel
BUG=none TEST=none Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I658372d082a8276f15c7165fe4104de4613fe7d0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52353 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-04-15soc/amd/common/block/gpio_banks: Use configure_scimap()Kyösti Mälkki
There is no need to stash the SCI trigger register configuration and apply it at the end. Remove this to make SCI and SMI programming more symmetrical and to use available configure_scimap function instead of implementing it again, but without the additional checks. Using this function also allows removing soc_route_sci. Change-Id: Ie23da79546858282910db65182a6315ade506279 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43012 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-04-15mb/google/guybrush,mancomb: include soc/gpio.h in baseboard/gpio.hFelix Held
This include provides the GPIO_x definitions. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I12a0d95f79658f3852132876e92c389b715f3001 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52358 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-15mb/google/zork: move include to the files where it's usedFelix Held
platform_descriptors.h is unrelated to the contents of baseboard/gpio.h where it was included, so move the includes to the files where it is actually needed. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I94e59b5aac2df834d956106ac953eebfc5cf6921 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52357 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-15mb/google/zork: include amdblocks/gpio_defs.h in baseboard/gpio.hFelix Held
amdblocks/gpio_defs.h provides the definitions of GEVENT_x. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I65d398667e6777de6f1fa4e027cf1c75a3e235c3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52356 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-15mb/google/kahlee: use defines for GEVENT numbersFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I353f0d241391dd1122c85866a74984b95ed54770 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52305 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-15vendorcode/intel/fsp: Update Tiger Lake FSP Headers for FSP v4133Srinidhi N Kaushik
Update FSP headers for Tiger Lake platform generated based on FSP version 4133. Previous version was 4043. BUG=b:185463045 BRANCH=none TEST=build and boot voxel Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: I27d8f7783a944bdd21e3615799b1342ffb0edd22 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52351 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2021-04-15herobrine: sc7280: Provide initial mainboard supportT Michael Turney
BUG=b:182963902 TEST=Validated on qualcomm sc7280 developement board Change-Id: I428cf1a461ee63215f5683abbfed90202d1b2a88 Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45206 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2021-04-15sc7280: Provide initial SoC supportRavi Kumar Bokka
BUG=b:182963902 TEST=Validated on qualcomm sc7280 developement board Change-Id: I1fc841b3113f2bf79b8376cd1ccdb671c53c2084 Signed-off-by: T Michael Turney <mturney@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45205 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2021-04-15mb/google/guybrush,mancomb: use EC_SCI_GPI in espi_sci_sources structFelix Held
The board's ec.h file defined EC_SCI_GPI as GEVENT_24, so use that definition in all places in the mainboard code instead of a mix of the board specific define and the SoC's GEVENT number define. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I46525ed24e9993acd3d850959dd63761a690d5df Reviewed-on: https://review.coreboot.org/c/coreboot/+/52309 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-04-15cpu/intel/common: use lapicid apiWonkyu Kim
Use lapicid api to support both x2apic mode and apic mode BUG=None BRANCH=None TEST=boot to OS and check apic mode cat /proc/cpuinfo | grep "apicid" Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: I5ca5b09ae67941adcc07dfafdfe4ba78b0f81009 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51725 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-15src/*acpi: create acpi table for x2apic modeWonkyu Kim
Create acpi table for x2apic nmi, apic_ids BUG=None BRANCH=None TEST=boot to OS and check apic mode cat /proc/cpuinfo | grep "apicid" Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: I9399d30b686b55d86806f5db4110bf4a80fe459b Reviewed-on: https://review.coreboot.org/c/coreboot/+/51724 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ravishankar Sarawadi <ravishankar.sarawadi@intel.com> Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2021-04-15*x86: Support x2apic modeWonkyu Kim
Implement x2apic mode as existing code only supports apic mode. Use info from LAPIC_BASE_MSR (LAPIC_BASE_MSR_X2APIC_MODE) to check if apic mode or x2apic mode and implement x2apic mode according to x2apic specfication. Reference: https://software.intel.com/content/www/us/en/develop/download/intel-64-architecture-x2apic-specification.html BUG=None BRANCH=None TEST=boot to OS and check apic mode cat /proc/cpuinfo | grep "apicid" ex) can see apicid bigger than 255 apicid : 256 apicid : 260 Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: I0bb729b0521fb9dc38b7981014755daeaf9ca817 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51723 Reviewed-by: Ravishankar Sarawadi <ravishankar.sarawadi@intel.com> Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-15mb/google/brya: Add FPMCU power controlEric Lai
Enable CRFP power control in gpio table. RST needs to drive low before PWR enable. Since reset signal is asserted in bootblock, it results in FPMCU not working after a S3 resume. This is a known issue. BUG=b:181377402 BRANCH=None Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I8a8fae80c3cc186e0a097ab2007abb656f382cbd Reviewed-on: https://review.coreboot.org/c/coreboot/+/52185 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-15lib/rtc: Remove unnecessary year constraint in rtc_calc_weekdayJakub Czapiga
Algorithm used to calculate weekday is now based on Zeller's rule, so it does not need if statement constraining year to 1971 and later. Signed-off-by: Jakub Czapiga <jacz@semihalf.com> Change-Id: I25e2e6a1c9b2fb1ac2576e028b580db0ea474d37 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52347 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2021-04-15mb/system76/oryp5: Enable TAS5825M smart ampTim Crawford
Allows using the internal speakers of the oryp5. Smart AMP data was collected using a logic analyzer connected to the IC during system start on proprietary firmware. This data is then used to generate a C file [1]. [1]: https://github.com/system76/smart-amp Change-Id: I148f18ff3e754d913bdf907121b103c6de02ffc3 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47962 Reviewed-by: Jeremy Soller <jeremy@system76.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-15drivers/i2c/tas5825m: Add driver for TI TAS5825MJeremy Soller
This adds a driver for the TI TAS5825M smart amplifier [1]. The driver expects the mainboard using it to define tas5825m_setup(), which uses the tas5825m_* functions to set configuration data. Each mainboard may have very different configuration data, depending on its audio hardware. Tested on System76 addw1, bonw14, oryp5, and oryp6. [1]: https://www.ti.com/product/TAS5825M Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Change-Id: I896e8f272f18e64bfc90f406e7d4163010800aaf Reviewed-on: https://review.coreboot.org/c/coreboot/+/43614 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-15mb/google/dedede/var/kracko: Add LTE modem supportTony Huang
Add LTE modem to devicetree Configure GPIO control for LTE modem BUG=b:178092096 TEST=Built image and verified with command modem status Change-Id: Id8f483e1132a08500fbe950711cc84197ce40b12 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52204 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-04-15mb/google/dedede/var/sasukette: Enable Wifi SAR for sasuketteTao Xia
BUG=b:185084331 BRANCH=dedede TEST=enable CHROMEOS_WIFI_SAR in config of coreboot, emerge-dedede coreboot-private-files-baseboard-dedede coreboot chromeos-bootimage. Signed-off-by: Tao Xia <xiatao5@huaqin.corp-partner.google.com> Change-Id: Ie982741cb7b328623cf27f41c31f819e8cdb7bc9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52289 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-04-15mb/google/zork: fine tune stamp_boost parameter for dirinbozKevin Chiu
The new discovery from Google & AMD, the value currently used STAPM Time Constant of 1640 is reducing real PPT TSP from the target 4.8W to 4.68W. Furthermore, when using the "default" STAPM Time Constant of 1400, the actual real PPT TSP becomes 4.89W. Operating at this default settings therefore uses a higher real PPT TSP, which results in a significant performance improvement. BUG=b:175364713,b:184902568 BRANCH=zork TEST=1. emerge-zork coreboot 2. run balance performance and skin temperature test => pass Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Change-Id: I9cf4d51f42fe250340bcb642db07796c9a480c34 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52312 Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Sam McNally <sammc@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-15mb/google/zork: fine tune stamp_boost parameter for gumbozKevin Chiu
The new discovery from Google & AMD, the value currently used STAPM Time Constant of 1640 is reducing real PPT TSP from the target 4.8W to 4.68W. Furthermore, when using the "default" STAPM Time Constant of 1400, the actual real PPT TSP becomes 4.89W. Operating at this default settings therefore uses a higher real PPT TSP, which results in a significant performance improvement. BUG=b:184902568 BRANCH=zork TEST=1. emerge-zork coreboot 2. run balance performance and skin temperature test => pass Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Change-Id: I102c1c5f8215a6c5f7a4451f5731167c32e27c90 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52313 Reviewed-by: Sam McNally <sammc@google.com> Reviewed-by: Kangheui Won <khwon@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-14mb/google/dedede/var/boten: Add custom Wifi SAR for botenflexStanley Wu
Add wifi sar for botenflex. Due to fw-config cannot distinguish between boten and botenflex. Using sku_id to decide to load botenflex custom wifi sar. Detail reason for using sku_id in b:182433707. BUG=b:182433707 TEST=build and test on boten/botenflex Cq-Depend: chrome-internal:3686313 Change-Id: Id3f2529a7ad56ff306df98f77cda556656da52a5 Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51501 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-04-14mb/google/volteer: Update collis device treeFrankChu
Update device tree override to match schematics. BUG=b:182227204 TEST=emerge-volteer coreboot Signed-off-by: FrankChu <frank_chu@pegatron.corp-partner.google.com> Change-Id: Ib1698504cc0b377659fa60b4fae25227b5823753 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51743 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Zhuohao Lee <zhuohao@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2021-04-14mb/google/volteer: Add GPIO to collis supportFrankChu
Add support for gpio driver for collis BUG=b:182227204 TEST=emerge-volteer coreboot Signed-off-by: FrankChu <frank_chu@pegatron.corp-partner.google.com> Change-Id: Ief225093bf93137384b64327a1c66576c9a5193a Signed-off-by: FrankChu <frank_chu@pegatron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51742 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Zhuohao Lee <zhuohao@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2021-04-14mb/system76/whl-u: Add System76 Galago Pro 3 Rev CTim Crawford
Tested with TianoCore payload (UefiPayloadPkg). Working: - PS/2 keyboard, touchpad - Both DIMM slots - NVMe port - SATA port - SD card slot - Left USB 3 Type-A port - Right USB 3 Type-A port - Right USB 3 Type-C port - Webcam - Ethernet - Integrated graphics using Intel GOP driver - mDP output - HDMI output - Internal microphone - Internal speakers - 3.5mm audio input - 3.5mm audio output - S3 suspend/resume - Flashing with flashrom - Booting to Ubuntu Linux 20.10 and Windows 10 Not tested: - Thunderbolt functionality Change-Id: I5c992e603dbd57ae1b4ddc3a0f9bfc92d6acc813 Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51832 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-14soc/amd/stoneyridge: use common pm_set_power_failure_state functionalityFelix Held
The functionality to restore the previous power state after power was lost that could previously be enabled by selecting MAINBOARD_POWER_RESTORE in the mainboard's Kconfig can now be achieved by selecting POWER_STATE_PREVIOUS_AFTER_FAILURE in the mainboard's Kconfig instead. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I49c4a44ca2c4fa937a823c4eddf1618739c15114 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52303 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-20 16:28:39 +0000