summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2020-06-20mb/google/zork: rename fch_apic_routing struct to fch_irq_routingFelix Held
fch_apic_routing is used as name of an array that init_tables() populates with the APIC IRQ routing information. Also the fch_pirq array where fch_apic_routing was used as struct name contains the IRQ mapping for both PIC and APIC mode, so rename it to fch_irq_routing. Change-Id: Iba7a2416c6e07cde1b8618bdabf31b00e3ca4dd1 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42569 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-06-20mb/google/zork: remove redundant IRQ routing configurationFelix Held
The PIC and APIC IRQ routing tables are pre-populated with PIRQ_NC in init_tables(), so the fch_pirq table entries where both IRQ numbers are set to fch_pirq are redundant and can be removed. Change-Id: I0d9b4f25e12a66cf86d1ad541955c3d2fe336c5a Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42568 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-06-19soc/amd: move acpi_wake_source.asl to common directoryFelix Held
Files are both identical and common for both SoCs. Change-Id: I54b78108d342a0fd03bf70ffe6a09695c5678eb4 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42545 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-19soc/intel/tigerlake: Update TCSS for SW CM supportJohn Zhao
This change adds support for SW CM. Add Operating System Capabilities (_OSC) method to enable USB/DisplayPort/Inter-domain USB4 Internet Protocol tunneling and enable PCIe tunneling as well. Remove Connect Topology(CNTP) command because kernel driver directly works with SW CM Thunderbolt firmware. Update _DSD method for USB4 support across XHCI and PCIe root ports. BUG=b:140645231 TEST=Check Type C device all ports connection/enumeration with SW CM. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: I859c5075882e40d7be30d4ba88cc825886712b74 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42295 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-06-19mb/google/zork: Disable UART 1, 2 and 3Raul E Rangel
We don't use these on zork, so lets save the power. BUG=b:153001807 TEST=Boot OS and make sure UART 1, 2 and 3 are not probed and remain powered off. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I2fadeba779b66ec2fb13951b9487118ef0737a94 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42328 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-06-19soc/intel/common/acpi: rename dptf.asl to dptf_common.asl fileSumeet R Pawnikar
Rename dptf.asl to dptf_common.asl under soc/intel/common/acpi path to avoid any kind of confusion with another dptf.asl file under soc/intel/common/acpi/dptf path. Sometime it's confusing to have two dptf.asl files just one directory apart. BUG=None BRANCH=None TEST=Build and boot on volteer system Change-Id: I23d93719e23c0b7659ccb23e5d0868f879bc162c Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42417 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-06-19tigerlake: add unique acpi device ids for dptfSumeet R Pawnikar
Add unique new acpi device ids for dptf for Tiger Lake soc based platforms and update volteer speficic dsdt.asl file accordingly. The Linux kernel driver expects these new acpi device ids for dptf functionalities. BUG=None BRANCH=None TEST=Build and boot on volteer system Change-Id: I7dbb812c0fc0f5084c98cf2752ce7ddce8e4d50e Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42040 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-06-19soc/amd/picasso/uart: factor out console-related functionsFelix Held
Move uart_platform_base and uart_platform_refclk to their own compilation unit to avoid preprocessor usage. The newly created compilation unit is only added to the build when PICASSO_CONSOLE_UART is selected. Change-Id: I56911addc8c000a0772156e5166720867cdd26fe Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42517 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-19vc/amd/fsp/picasso: Use fixed width fields for platform descriptorsMatt Papageorge
PCIe platform descriptors passed to Picasso FSP should use fixed width fields. BUG=b:153681134 TEST=Boot system and suspend/resume. All PCIe devices train succesfully. Signed-off-by: Matt Papageorge <matt.papageorge@amd.corp-partner.google.com> Change-Id: If2a34be895db2c19c8830f5888cb99e43ad21b73 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42519 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Matt Papageorge <matthewpapa07@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-19Kconfig: Escape variable to accommodate new Kconfig versionsPatrick Georgi
Kconfig 4.17 started using the $(..) syntax for environment variable expansion while we want to keep expansion to the build system. Older Kconfig versions (like ours) simply drop the escapes, not changing the behavior. While we could let Kconfig expand some of the variables, that only splits the handling in two places, making debugging harder and potentially messing with reproducible builds (e.g. when paths end up in configs), so escape them all. Change-Id: Ibc4087fdd76089352bd8dd0edb1351ec79ea4faa Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42481 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
2020-06-19mb/*/*/Kconfig: guard board name in quotesPatrick Georgi
New kconfig dislikes unquoted slashes. Change-Id: Ief242de081071021b9c904a24535d025f6674270 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42480 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-19mb/pcengines/apu2: Update GPIO Reads & writesMartin Roth
The APU2 was using the soc/amd/common functions to do GPIO reads and writes. The functions that were being used are getting eliminated in the SOC directory, but since the APU isn't using the rest of that code (as it's not using the rest of the SOC codebase), it proved to be problematic to use the updated functions. The solution I've put in place here is to pull everything needed for the GPIO reads & writes into the gpio_ftns.c & h files. Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: Ied39c114bdf3637977d21f56fd7db428c52e4706 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42484 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2020-06-18src/device/Kconfig: Introduce WANT_LINEAR_FRAMEBUFFERAngel Pons
This decouples the linear framebuffer type from the symbols needing it. Change-Id: I733e630e0aa2fb2947d079caef26253ce443fe91 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42432 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-18soc/amd/picasso/i2c: use config_of_soc()Felix Held
Change-Id: I2ebe072a5c887b16d2a39f029069bc8674f8eaea Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42478 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-06-18soc/amd/picasso/acp: use config_of_soc()Felix Held
Change-Id: I815b013438d66eef6605dba7cfbd96b9a4aff9b2 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42477 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-06-18soc/amd/picasso: Add ability to enable/disable UART to device treeRaul E Rangel
If we are not using the UARTs or they don't have the correct GPIOs configured we should let the mainboard disable them. BUG=b:153001807 TEST=Dump SSDT and see UART device is disabled Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ifc04e36e0ebe5cce4b6cc228c7174dc76f2ffa4a Reviewed-on: https://review.coreboot.org/c/coreboot/+/42327 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-06-18soc/amd/picasso: remove AMDFW_OUTSIDE_CBFS optionFelix Held
The option to have amdfw outside of CBFS used dd to write amdfw at a given location overwriting anything that was there before, which may cause the build to fail due to the FMAP header being overwritten resulting in a not too obvious error that the image is a legacy image without FMAP header. Mandolin was the only board using this functionality, but I fixed the placement of components in the flash image there, so that amdfw can just be placed in CBFS avoiding those problems. Change-Id: I0f3abab9d3939da43e1681d5cfe2c8d494402acf Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42438 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-18lib/hardwaremain: Drop HAVE_ACPI_RESUME guardsKyösti Mälkki
Header was moved outside arch/. Change-Id: I1f2f0d96d49b5d921f77512ad5e2bf3f60adb484 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42457 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-06-18ACPI,drivers/: Do not guard <acpi/acpi.h>Kyösti Mälkki
Header was moved outside arch/. Change-Id: Id96c2bdcee49cddab6610c7e2cd6f07638279256 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42456 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-06-18ACPI: Clean up some S3 related leftoversKyösti Mälkki
With RELOCATABLE_RAMSTAGE the backing up of low memory on S3 resume path was dropped. We forgot some things behind. Change-Id: I674f23dade0095e64619af0ae81e23368b1ee471 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42422 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-06-18soc/intel,chromeos: Fix EC RO/RW status in GNVSKyösti Mälkki
For baytrail and braswell, explicitly initialise it to ACTIVE_ECFW_RO without ChromeEC. For broadwell and skylake, fix it to report actual google_ec_running_ro() status. Change-Id: I30236c41c9261fd9f8565e1c5fdbfe6f46114e28 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42389 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-18mb/bap/ode_e21XX: Drop left over unmaintained ROMCC boardElyes HAOUAS
Remove unmaintained and unsupported old ROMCC board. This board wasn't hooked up for build. Change-Id: Idd907311dde187aa62d29a9d3943b6d5c08a1f71 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42071 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-06-18soc/intel/tigerlake: Enable FSP-S compressionKarthikeyan Ramasubramanian
Use LZ4 compression technique to compress FSP-S. This provides some SPI ROM space savings (~36 KiB) in each CBFS. FSP-M is XIP and hence not compressed. LZ4 is chosen over LZMA since the decompression saves ~25 ms for an extra overhead of ~1KiB. LZ4 Compression: fsps.bin 0xe6fc0 fsp 254262 LZ4 (290816 decompressed) LZ4 Decompression: 17:starting LZ4 decompress (ignore for x86) 712,361 (1,072) 18:finished LZ4 decompress (ignore for x86) 750,695 (38,334) LZMA Compression: fsps.bin 0xe6fc0 fsp 253415 LZMA (290816 decompressed) LZMA Decompression: 15:starting LZMA decompress (ignore for x86) 707,696 (1,150) 16:finished LZMA decompress (ignore for x86) 767,763 (60,067) BUG=b:158034451 TEST=Build and boot volteer mainboard. Change-Id: I91e33eb7b688b5383f3a0075a28ac21250314973 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42444 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-18soc/intel/jasperlake: Enable FSP-S compressionKarthikeyan Ramasubramanian
Use LZ4 compression technique to compress FSP-S. This provides some SPI ROM space savings(~60 KiB) in each CBFS. FSP-M is XIP and hence not compressed. LZ4 is chosen over LZMA since the decompression saves ~50 ms for an extra overhead of ~1.5 KiB. LZ4 Compression: fsps.bin 0xa9fc0 fsp 203423 LZ4 (262144 decompressed) LZ4 Decompression: 17:starting LZ4 decompress (ignore for x86) 433,550 (1,154) 18:finished LZ4 decompress (ignore for x86) 461,620 (28,069) LZMA Compression: fsps.bin 0xa9fc0 fsp 202132 LZMA (262144 decompressed) LZMA Decompression: 15:starting LZMA decompress (ignore for x86) 478,448 (1,174) 16:finished LZMA decompress (ignore for x86) 557,725 (79,277) BUG=b:158034451 TEST=Build and boot waddledoo mainboard. Change-Id: I416b1d91d7f4836b1e9c641b0fe07b39876364ba Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42445 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-06-18soc/intel/cannonlake: Enable FSP-S compressionKarthikeyan Ramasubramanian
Use LZMA compression technique to compress FSP-S. This provides some SPI ROM space savings(~27 KiB) in each CBFS. FSP-M is XIP and hence not compressed. LZMA is chosen over LZ4 since it provides extra space savings of ~1 KiB for the decompression overhead of ~7 ms. LZMA Compression: fsps.bin 0xd1fc0 fsp 190132 LZMA (217088 decompressed) LZMA Decompression: 15:starting LZMA decompress (ignore for x86) 343,289 (417) 16:finished LZMA decompress (ignore for x86) 373,922 (30,632) LZ4 Compression: fsps.bin 0xd1fc0 fsp 191310 LZ4 (217088 decompressed) LZ4 Decompression: 17:starting LZ4 decompress (ignore for x86) 345,676 (581) 18:finished LZ4 decompress (ignore for x86) 369,101 (23,424) BUG=b:158034451 TEST=Build and boot helios mainboard. Change-Id: Ic0d0d81c81eaa365f3dbfdd2e00ac76cea287387 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42446 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-18vendorcode/intel/fsp: Update MemInfoHob header for Jasper LakeAamir Bohra
Jasper Lake has been using the incorrect MemInfoHob header. Updating the header to align it with Jasper Lake MRC code. BUG=b:158722318 TEST=Verify memory info is populated for channnel 0 and 1 on wadddledoo. Change-Id: Icca3e3b4cda9ca257f3b725823facf52ceec37b7 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42420 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
2020-06-18mb/google/dedede: Add support for 16 MiB flash map descriptorKarthikeyan Ramasubramanian
Upcoming variant boards will use 16 MiB SPI ROM. So add support for 16 MiB flash map descriptor. BUG=b:155107866,b:152981693 TEST=Build different variant boards. Ensure that waddledoo which is using 32 MiB SPI ROM boots. Cq-Depend: chrome-internal:3107306 Change-Id: I8a6868da3280a662ff3a30623804ff135e6cbfbc Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42322 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-06-18soc/intel: remove unused dptf.asl file and other definesSumeet R Pawnikar
Remove unused cannonlake dptf.asl file and cleanup defines from apollolake dptf.asl file as per soc/intel/common/acpi code changes for dptf. BUG=None BRANCH=None TEST=Build and boot on the system Change-Id: I4c8bf2bd5da9d5881e7690bff34816b19dd96072 Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42042 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-06-18mb/google: remove cannonlake dptf.asl include file from dsdt filesSumeet R Pawnikar
Remove cannonlake dptf.asl include file from all the dsdt files as per soc/intel/common/acpi code changes for dptf. BUG=None BRANCH=None TEST=Build and boot on the system Change-Id: I961a3ecb27e7bb7bb0b98c8630900bada0531639 Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42041 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-06-18soc/intel/common: make dptf acpi device ids configurableSumeet R Pawnikar
Make dptf acpi device ids configurable for thermal functionality as per soc/intel/common/acpi code changes for dptf. BUG=None BRANCH=None TEST=Build and boot on volteer system Change-Id: I5161d19dc663cdb9a7b004bb681059c9af2aaf4f Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42039 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-06-18mb/google/hatch: fix variants' selection of CHROMEOS_DSM_CALIBMatt DeVillier
CHROMEOS_DSM_CALIB requires/selects CHROMEOS, so only select if CHROMEOS already selected, otherwise building for non-ChromeOS targets fails. Test: build HELIOS for non-ChromeOS target (Tianocore payload) Change-Id: Ic0fd3b0a0efbc5a1f6896eb379569a55cb0f67f8 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42414 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-06-18mb/google/volteer/variants/terrador: Disable EC SW syncDavid Wu
It is the reference board of TGL-Y platform, we want to disable EC SW sync for Proto stage, it would be re-enabled before EVT stage. BUG=b:156435028 TEST=FW_NAME=terrador emerge-volteer coreboot chromeos-bootimage Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: Ie7999e24e9c173d4870b35ce1728f3dcc8dcac29 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42090 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-18soc/intel/common: Introduce ASL2.0 syntaxAlexey Buyanov
Fix last legacy ASL syntax match in acpi/pcr.asl BUG=none TEST=Deltan coreboot binary remains the same after the changes are applied Signed-off-by: Alexey Buyanov <alexey.buyanov@intel.com> Change-Id: Ia1021851b42b8fad52b3197d9003056d3dd2db04 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42437 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-17security/tpm: Change wording of variable namesDuncan Laurie
Change the name of these variables to 'allowlist'. Change-Id: I9d5553988a1c9972b8f1ebaeee20878b23a8aa9b Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42316 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-17lib/reg_script: Add guards for <arch/io.h>Kyösti Mälkki
Header and implementation only present for ARCH_X86 stages. Change-Id: I4b28e666a8a60bd0365cda8d7affa1eb063c4690 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42416 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-17treewide: Replace CONFIG(ARCH_xx) testsKyösti Mälkki
Once we support building stages for different architectures, such CONFIG(ARCH_xx) tests do not evaluate correctly anymore. Change-Id: I599995b3ed5c4dfd578c87067fe8bfc8c75b9d43 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42183 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-17Revert "soc/amd/picasso: Reconfigure SPI speeds after FSP-S has run"Furquan Shaikh
This reverts commit d5f1e0f9734273f79ebd313bb6a17eda04c22c11. Reason for revert: FSP-S is now fixed to not touch the SPI configuration registers. Thus, coreboot does not need to reconfigure SPI after FSP-S has run. BUG=b:153506142 TEST=Verified that SPI configuration registers look the same before and after FSP-S has run. em100 works fine without any additional changes in coreboot to reconfigure SPI. Change-Id: I4832e62e0331aa39abe0cca7725915262bb2cf83 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42406 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin Frodsham <justin.frodsham@amd.corp-partner.google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-06-17ec/google/wilco: Suppress UCSI events in S0ixDuncan Laurie
If a UCSI event comes in when the EC is in S0ix mode then the kernel driver attempts a transaction but fails and this can leave the system in an unexpected state where the only wake source is the power button. This change will not notify the UCSI driver if the EC is in S0ix mode and instead keep track of the event and send it on resume. BUG=b:157923800 TEST=tested on drallion system: 1. Put drallion system into suspend 2. Attach power supply 3. Ensure the system can wake with keypress Signed-off-by: Duncan Laurie <dlaurie@google.com> Change-Id: I43acb089385d9b41ac955f053e409daad67423f1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42237 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-06-17mb/google/volteer: remove unused GPP_H23Nick Vaccaro
BUG=b:157567939 TEST="emerge-volteer coreboot chromeos-bootimage", flash and boot volteer to kernel. Change-Id: I3046cf3a359e833a5d204f78ab84312e8665061f Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42411 Reviewed-by: Jes Klinke <jbk@google.com> Reviewed-by: Caveh Jalali <caveh@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-17mb/volteer: Set IomTypeCPortPadCfg default to 0x09000000Brandon Breitenstein
Temporary workaround for S0ix issues related to FSP's handling of 0 value. When IomTypeCPortPadCfg is 0 FSP completely skips any flow related to this value which seems to be causing issues with s0ix. This is still being debugged and a final solution will be made when available BUG=b:159151238 TEST=flash image with workaround to volteer and verify that s0ix cycles correctly. Change-Id: Id79dd1c49958389cdb666b3760abd821bc1973a8 Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42268 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Shreesh Chhabbi <shreesh.chhabbi@intel.corp-partner.google.com> Reviewed-by: Caveh Jalali <caveh@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-17soc/amd/picasso: rename PICASSO_UART Kconfig optionFelix Held
The PICASSO_UART Kconfig option is about using the internal MMIO UART controllers in Picasso for console, so rename it to PICASSO_CONSOLE_UART Change-Id: I38ac9ee96af826fe49307b4d0e055a43fcbd4334 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42429 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-06-17soc/amd/picasso: fix build if PICASSO_UART is unsetFurquan Shaikh
This change includes uart.c in bootblock, romstage, ramstage and verstage unconditionally because this file is handling more than just the UART console configuration. This allows boards to take advantage of picasso_uart_mmio_ops even if PICASSO_UART is not selected. uart_platform_base and uart_platform_refclk mustn't be provided if PICASSO_UART is unset, so add an #if around those functions. BUG=b:158346697 TEST=Mandolin builds again. Change-Id: If1173034b0d2ed32f77241768e1e8abb208aac3a Signed-off-by: Furquan Shaikh <furquan@google.com> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42339 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-17device/pnp_ops.h: Use pnp.h functionsAngel Pons
With BUILD_TIMELESS=1, Asrock B85M Pro4 remains identical. Change-Id: I3ca080e700cf7b7f5b76cadddc7e41960413433c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42133 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-17soc/soch/intel/tigerlake: Integrate PCIe hot-plug config UPDWonkyu Kim
This patch adds support for enabling/disabling PCIe hot-plug via a chip config option PcieRpHotPlug, which is copied to the corresponding FSP-S UPD. BUG=b:156879564 BRANCH=none TEST=Boot Volteer/RVP with FSP log and check hotplug enabled/disabled Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: I4c0187644b6ca9735f1b159e110e3466af14ff71 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41794 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-17mb/google/hatch: mushu: Add F75303 temp sensor to dptfPuthikorn Voravootivat
Update the following in dptf.asl - Add support for TSR3 - Change TSR0/TSR1/TSR2/TSR3 From: Charger, 5V, GPU , None To: Charger, GPU, F75303_GPU, F75303_GPU_POWER - Adjust fan/cpu trip point accordingly - Fix formating in dptf.asl - Throttle charger when TSR0 (charger) is hot instead of throttle CPU BUG=b:158676970 BRANCH=None TEST=grep . /sys/class/thermal/thermal_zone5/{type,temp} /sys/class/thermal/thermal_zone5/type:TSR3 /sys/class/thermal/thermal_zone5/temp:50800 Change-Id: Iedbb6bc7c1e59a027119c70791b9bc8a4d83ff87 Signed-off-by: Puthikorn Voravootivat <puthik@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42270 Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Bob Moragues <moragues@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-17smmstore: Verify userspace-provided pointer to protect SMMPatrick Rudolph
Use the introduced functions and verify pointers in the SMMSTORE. Make sure to not overwrite or leak data from SMM and update the documentation as well. Change-Id: I70df08657c3fa0f98917742d8e1a6cb1077e3758 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41085 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-17cpu/x86/smm: Add helper functions to verify SMM accessPatrick Rudolph
* Add a function to check if a region overlaps with SMM. * Add a function to check if a pointer points to SMM. * Document functions in Documentation/security/smm To be used to verify data accesses in SMM. Change-Id: Ia525d2bc685377f50ecf3bdcf337a4c885488213 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41084 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-17soc/intel/cannonlake/vr_config: Add CFL defaults to TDC powerlimitPatrick Rudolph
Add CFL defaults for VR TDC config and provide Iccmax for additional Xeon CPUs tested on the Prodrive/Hermes board. Based on the following Intel documents: * Document Number 570805 (XEON E EDS Vol 1) * Document Number 337344 (CFL Datasheet Vol 1) * Document Number 571264 (CFL CNP PDG) Change-Id: I681de076318fb647c44cc8b8c42eb297018cc540 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40856 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2020-06-17soc/intel/cannonlake: Use table instead of switch-casePatrick Rudolph
This makes future changes easier to review. Change-Id: I5d67801a46a1613fbc7f813e94933fa30c1b92df Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41507 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2020-06-17mb/google/puff: add MST and LSPCON details to variants devicetreeShiyu Sun
Added device hid info to the MST and LSPCON devices on kaisa, duffy and noibat. BRANCH=None BUG=b:156546414 TEST=None Signed-off-by: Shiyu Sun <sshiyu@chromium.org> Change-Id: I7b54512cd88e7280374c188315cabc2fba197f69 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42369 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sam McNally <sammc@google.com> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2020-06-16Revert "x86/lapic: Set EXTINT on BSP only"Angel Pons
This reverts commit aac79e0b8f4777f8a912ccdfc483755b7a4da52c. Reason for revert: This massively slows down the boot process because the LAPIC delivery mode for the APs is not set anymore. Plus, not all review comments were fully addressed, yet this got merged in anyway. Change-Id: If9bae6aae0d4d1f21b067a7d970975193c2b16d5 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42166 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-06-16superio/winbond/w83977tf: Add suspend related fieldsKeith Hui
Add two fields for the ACPI logical device to the ACPI code. They are used for taking asus/p3b-f board out of suspend by keyboard or mouse. Change-Id: Icaadfea6a4dce7a2d665e8d89a024359975f8b2c Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41096 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-16x86/lapic: Set EXTINT on BSP onlyZheng Bao
When Linux is booted, the kernel reports "do_IRQ: 1.55 No irq handler for vector" So far it comes with payloads SeaBIOS and depthcharge, not with Grub. We assume Grub does something to avoid this problem. AMD bug tracker system (JIRA PLAT-21393) says the APs can not be set EXTINT delivery mode. In Intel 64 and IA-32 Architectures Software Developer’s Manual volume 3A, see chapter 10.5.1 Local Vector Table, it says: "The APIC architecture supports only one ExtINT source in a system, usually contained in the compatibility bridge. Only one processor in the system should have an LVT entry configured to use the ExtINT delivery mode." Tested on mandolin (Picasso) board, the error in dmesg is gone. The bug 153677727 has two parts. 1. Soft lockup 2. do_IRQ 1.55. The soft lockup issued has been fixed by https://review.coreboot.org/c/coreboot/+/41128 BUG=b:153677727 TEST=mandolin Change-Id: I2956dcaad87cc1466deeca703748de33390b7603 Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42219 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-16mb/pcengines/apu2/mainboard.c: unify hexadecimal notation using capital lettersPiotr Kleinschmidt
mainboard_intr_data table mixed hexadecimal notation with both small and capital letters. Now, it is unified to capitals only. Signed-off-by: Piotr Kleinschmidt <piotr.kleinschmidt@3mdeb.com> Change-Id: Icd8cf4324e72e87e7e98869872785523fb4e1809 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42388 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-16sb/intel/common/pmutil: Add dump_all_status()Kyösti Mälkki
Change-Id: I10582941afd68425603f6c4cadd228797cd098e9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42360 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-06-16lib/malloc: Drop <cpu/x86/smm.h> includeKyösti Mälkki
Change-Id: I39b8dc37219195e88ea6396aa7e987e5e244bbab Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42385 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-06-16soc/amd/picasso/include/soc/memmap.c: Add missing <stdint.h>Elyes HAOUAS
include <stdint.h> for 'uint32_t'. Change-Id: I8768b7f0692ed703a060dc0406b517dc001cc25d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42338 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-06-16cpu/x86: Define MTRR_CAP_PRMRRKyösti Mälkki
Followups will remove remaining cases of PRMRR_SUPPORTED and SMRR_SUPPORTED in the tree. Change-Id: I7f8c7d98f5e83a45cc0787c245cdcaf8fab176d5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42358 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-06-16sb/intel/i82801dx: Drop smm_setup_structures()Kyösti Mälkki
The only board that builds this does not have ACPI S3 support. Also the code is wrong. Change-Id: Ifb8e0ae5b6d862fa6a52b8e08197a84e7da4be36 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42357 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-06-16soc/amd: Replace enable_smi_generation()Kyösti Mälkki
Change-Id: I9846df34fd2b6b15549fa33d3eda137544fa4219 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41962 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-06-16sb/amd/x/hudson: Replace hudson_enable_smi_generation()Kyösti Mälkki
Change-Id: I08b2d1af16c247e66bf1a352887b0f9387055225 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42356 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-06-16sb,soc/intel: Replace smm_southbridge_enable_smi()Kyösti Mälkki
Change-Id: I8a2e8b0c104d9e08f07aeb6a2c32106480ace3e5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41961 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-06-16soc/intel/common: Replace smm_soutbridge_enable(SMI_FLAGS)Kyösti Mälkki
Change-Id: I8c4dc5ab91891de9737189bd7ae86df18d86f758 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41960 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-06-16arch/x86: Declare global_smi_enable()Kyösti Mälkki
The call made at mp_ops.post_mp_init() generally uses four different names. Unify these with followups. smm_southbridge_enable(SMI_EVENTS) smm_southbridge_enable_smi() hudson_enable_smi_generation() enable_smi_generation() Furthermore, some platforms do not enable power button SMI early. It may be preferred to delay the enablement, but fow now provide global_smi_enable_no_pwrbtn() too. Change-Id: I6a28883ff9c563289b0e8199cd2ceb9acd6bacda Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42355 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-06-16sb/intel: Remove spurious HAVE_SMI_HANDLER testKyösti Mälkki
There are no side-effects in calling acpi_is_wakeup_s3() and apm_control() is a no-op with HAVE_SMI_HANDLER=n. Change-Id: Ia9195781955cc5fa96d0690aa7735fc590e527e4 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41986 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-16arch/x86: Create helper for APM_CNT SMI triggersKyösti Mälkki
Attempts to write to APM_CNT IO port should always be guarded with a test to verify SMI handler has been installed. Immediate followup removes redundant HAVE_SMI_HANDLER tests. Change-Id: If3fb0f1a8b32076f1d9f3fea9f817dd4b093ad98 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41971 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-16sb/intel: Clean up some SMI enablesKyösti Mälkki
Change-Id: I191ad709fd3c6f906cd34b0053eeaebdb80d410d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42354 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-06-15i945 boards: Factor out MAX_CPUSAngel Pons
At least one mobile 945 series northbridge supports 4 threads, because the dual-core Atom 330 CPU supports Hyper-threading. Therefore, we use that as the default for this chipset. Change-Id: I899ed1644d9b2da4fc72f09233a421200770110d Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41845 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-15gm45 boards: Factor out MAX_CPUSAngel Pons
The gm45 northbridge supports at most 4 threads. However, the only two mobile Core 2 Quad models are not BGA956, so account for that as well. Change-Id: Ie198ac4c366ec0bd53ddb337b6f9c03c331c73f5 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41844 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-06-15pineview boards: Factor out MAX_CPUSAngel Pons
Pineview has at most 4 threads. Change-Id: I0f45f002d0bab0345bc061ac3c7a29237a536cc5 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41843 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-15haswell boards: Factor out MAX_CPUSAngel Pons
ULT only has 4 threads, but we are not changing it here to preserve binary reproducibility. Change-Id: I041c5dff2de514244f9c919c4c475cca979c34ce Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41842 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-15x4x boards: Factor out MAX_CPUSAngel Pons
LGA775 CPUs can have at most 4 threads, and Eaglelake supports them. As this socket is also used by other chipsets, temporarily place this symbol into the northbridge scope until all chipsets are factored out. Change-Id: I6e01363d995e135815cc70779e0cd5baf806cf60 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41841 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-06-15arrandale boards: Factor out MAX_CPUSAngel Pons
Arrandale CPUs have at most 4 threads. Change-Id: Ifecbf5583011ff5e36c576d582a6276bc9b72803 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41840 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-15sandybridge boards: Factor out MAX_CPUSAngel Pons
Also update autoport accordingly. Change-Id: I12481363cf0e7afc54e2e339504f70632e8d72e2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41839 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-15include: update cbmem_possibly_online for vboot_before_bootblockMartin Roth
cbmem is not online when vboot runs before the bootblock. Update the macro to reflect that. BUG=b:158124527 TEST=Build & boot psp_verstage on trembyle Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: I6fb4ad04f276f2358ab9d4d210fdc7a34a93a5bb Reviewed-on: https://review.coreboot.org/c/coreboot/+/42066 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-06-15Makefile.inc: Remove all-y with CONFIG_ARCH_xx guardsMartin Roth
The assumption up to this point was that if the system had an x86 processor, verstage would be running on the x86 processor. With running verstage on the PSP, that assumption no longer holds true, so exclude pieces of code that cause problems for verstage on the PSP. As a generalization, remove all-y for CONFIG_ARCH_xx guarded makefiles. BUG=b:158124527 TEST=Build and boot on Trembyle Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: Ia7dcfed699ee1c0cd5a5250431c5f05bf6d8b9c7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42221 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-06-15vc/amd/fsp/picasso: Add AMD code to support psp_verstageMartin Roth
Add the AMD supplied code (modified to work with GCC) to the vendorcode directory. Verstage will be running on the PSP as a userspace application under the bootloader, which is what bl_uapp signifies. AMD is still working on documentation for the entire PSP userspace application interface. BUG=b:158124527 TEST=Build & boot psp_verstage on Trembyle Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: Ie740c89afe2277eff279fc5c94f88ffd43a78a37 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42060 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-06-15soc/amd/common/block/acpimmio: Update acpimmio for psp_verstageMartin Roth
Because the PSP maps the MMIO addresses that are used to non- deterministic addresses, the accesses need to be able to find the address at runtime. BUG=b:158124527 TEST=Build & boot with Trembyle Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: I68305e0f31956c57bfdee42025bdfe938703e82d Reviewed-on: https://review.coreboot.org/c/coreboot/+/42061 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-15console: Update for vboot before bootblockMartin Roth
Exclude pieces of console code from the vboot if running before bootlock. The PSP verstage code will re-implement some of these in its own code. BUG=b:123887623 TEST=Build with following patches Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: Ifc9fb0810e0816fe0a68e52287eda6145043a619 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41815 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-15include/rules.h: Add vboot_before_bootblock to ENV_ROMSTAGE_OR_BEFOREMartin Roth
BUG=b:158124527 TEST=Build & boot Trembyle with PSP verstage Change-Id: I3f5cc4d396c678f1020409cbdcb5127b2e0e6d89 Signed-off-by: Martin Roth <martin@coreboot.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42379 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-15security/vboot: Add option to run verstage before bootblockMartin Roth
For AMD's family 17h, verstage can run as a userspace app in the PSP before the X86 is released. The flags for this have been made generic to support any other future systems that might run verstage before the main processor starts. Although an attempt has been made to make things somewhat generic, since this is the first and currently only chip to support verstage before bootblock, there are a number of options which might ultimately be needed which have currently been left out for simplicity. Examples of this are: - PCI is not currently supported - this is currently just a given instead of making a separate Kconfig option for it. - The PSP uses an ARM v7 processor, so that's the only processor that is getting updated for the verstage-before-bootblock option. BUG=b:158124527 TEST=Build with following patches Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: I4849777cb7ba9f90fe8428b82c21884d1e662b96 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41814 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-06-15cpu/intel: Remove obsolete comment in CAR setupKyösti Mälkki
A looong time ago when cache_as_ram.S was built into romstage, the stage was also linked twice. First at a fixed low address and then again relocated at the final execute-in-place address. Change-Id: Ic624feef6794f2c24e38459a45583d84fc07a484 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42347 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-06-15arch/x86: Remove NO_FIXED_XIP_ROM_SIZEKyösti Mälkki
The variable SETUP_XIP_CACHE provides us a working alternative. Change-Id: I6e3befedbbc7967b71409640dc81a0c2a9b3e511 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41821 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-06-15arch/x86: Remove XIP_ROM_SIZEKyösti Mälkki
When adding XIP stages on x86, the -P parameter was used to pass a page size that covers the entire file to add. The same can now be achieved with --pow2page and we no longer need to define a static Konfig for the purpose. TEST: Build asus/p2b and lenovo/x60 with "--pow2page -v -v" and inspect the generated make.log files. The effective pagesize is reduced from 64kB to 16kB for asus/p2b giving more freedom for the stage placement inside CBFS. Pagesize remained at 64kB for lenovo/x60. Change-Id: I5891fa2c2bb2d44077f745619162b143d083a6d1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41820 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Keith Hui <buurin@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-06-14soc/amd/picasso/graphics: implement map_oprom_vendev_revMartin Roth
Picasso, Dali, and Pollock iGPU share the same PCI device ID, but need different video BIOSes. This checks the vendor & device IDs along with the revision and selects the correct video BIOS to use. Also add the second VGA BIOS for Raven2-based SoCs and change all VGA BIOS IDs to the format including the revision number. Since SeaBIOS still expects the CBFS file name without the revision ID, it won't find the VBIOS any more. As a temporary workaround add the VBIOS for the silicon it will run on as VGA_BIOS_DGPU_*. Change-Id: I8f48ecc3fbffddd21d1f830fbee26a09ac351e1c Signed-off-by: Martin Roth <martinroth@chromium.org> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://chromium-review.googlesource.com/2040455 Reviewed-by: Raul E Rangel <rrangel@chromium.org> Reviewed-by: Matt Papageorge <matt.papageorge@amd.corp-partner.google.com> Reviewed-by: Justin Frodsham <justin.frodsham@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41562 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-06-14drivers/intel/fsp2_0: Add FSP 2.2 specific supportSubrata Banik
• Based on FSP EAS v2.1 – Backward compatibility is retained. • Add multi-phase silicon initialization to increase the modularity of the FspSiliconInit() API. • Add FspMultiPhaseSiInit() API • FSP_INFO_HEADER changes o Added FspMultiPhaseSiInitEntryOffset • Add FSPS_ARCH_UPD o Added EnableMultiPhaseSiliconInit, bootloaders designed for FSP 2.0/2.1 can disable the FspMultiPhaseSiInit() API and continue to use FspSiliconInit() without change. FSP 2.2 Specification: https://www.intel.com/content/www/us/en/intelligent-systems/intel-firmware-support-package/intel-fsp-overview.html Change-Id: If7177a267f3a9b4cbb60a639f1c737b9a3341913 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41728 Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-14mb/google/volteer: Disable HDA PCI device when AUDIO=NONEDuncan Laurie
If there is no installed audio daughter board on volteer then the HDA driver in the kernel will crash on resume. In order to prevent this disable the PCI device when AUDIO=NONE probe match is true. BUG=b:147462631 TEST=boot on volteer and ensure that the PCI device at 0:1f.3 is gone Change-Id: I4a436e1b76418030bf635427e490b54a713fdd33 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41217 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-06-14mb/google/zork: Drop OEM_BIN configsFurquan Shaikh
Zork family does not use OEM binary and so this change drops the configs required for adding this binary. Change-Id: Id38c67030e4055ab16934d1a900ee1cea5843b54 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42336 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-06-14mb/google/zork: Enable ELOG optionsFurquan Shaikh
This change enables following ELOG options for zork family: ELOG ELOG_BOOT_COUNT ELOG_GSMI ELOG_BOOT_COUNT_CMOS_OFFSET BUG=b:158875638 TEST=Verified that kernel reports GSMI loading correctly: [ 5.308982] gsmi version 1.0 loaded Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I4f34a814e744e863f1fbfc19e37209cb7febbdcc Reviewed-on: https://review.coreboot.org/c/coreboot/+/42332 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-06-14southbridge/intel/common: Introduce ASL2.0 syntaxAlexey Buyanov
Modify southbridge/intel/common .asl files to comply with ASL2.0 syntax for better code readability and clarity BUG=none BRANCH=none TEST= Google Parrot platform coreboot binary remains the same after the changes are applied Signed-off-by: Alexey Buyanov <alexey.buyanov@intel.com> Change-Id: Ia11769d5ac6154ed79d967d7bab36e12a1db751a Reviewed-on: https://review.coreboot.org/c/coreboot/+/42084 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-14soc/amd/picasso/aoac: Add wait_for_aoac_enabledRaul E Rangel
This way drivers can wait for their devices to be enabled. I also rewrote enable_aoac_devices to take advantage of wait_for_aoac_enabled. BUG=b:153001807 TEST=Trembyle builds Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I8e653c857e164f90439e0028e08aa9608d4eca94 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42326 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-06-14soc/amd/picasso/aoac: Set the Target Device State when powering onRaul E Rangel
If the OS sets the target device state to D3, we need to clear it so we can reestablish register access. BUG=b:153001807 TEST=Boot trembyle with I2C powered off and see it power back on. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: If9bd1b7cfa7b8d074226c4dcdefc1a44cad8b940 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42325 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-06-14soc/amd/picasso: Move aoac functions to new fileRaul E Rangel
This functionality is needed in the PSP and I can't include all of southbridge.c. BUG=b:153001807 TEST=Made sure trembyle still compiles Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I3a38c655588d7836e1bd033e958a505774de871e Reviewed-on: https://review.coreboot.org/c/coreboot/+/42324 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-14soc/amd/picasso: Explicitly disable legacy UARTRaul E Rangel
The legacy UARTs are supposed to default to off according to the documentation (PPR for AMD Family 17h Model 18h). But legacy UART Range_0 is enabled after reset. The PSP might be enabling it or the documentation might be wrong. Having it enabled causes problems though. We have ACPI nodes defining MMIO UARTs, and the kernel also probes for legacy UARTs. This results in two drivers accessing the same device, one via MMIO and one via IO. I suspect this was the cause of the garbage serial output. Before the change you would see the following in the console: [ 0.741108] serial8250: ttyS3 at I/O 0x2e8 (irq = 3, base_baud = 115200) is a 16550A After this change, we no longer see it. BUG=b:152079780, b:157858890 TEST=Boot trembyle and make sure serial is still working. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I9d837e449b961dbb55d1301d2107838e26b3f892 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42323 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-06-14console, PCI: Remove EARLY_PCI_BRIDGE support in verstageKyösti Mälkki
The purpose of pci_early_bridge_init() is to temporarily configure PCIe rootport (or PCI bridge) on bus 0 to configure PCI device BARs on the secondary bus. Currently used and tested only with UART_OXPCIE. Since those BARs do not reset on stage changes, it is not necessary to redo those steps for verstage or postcar. Note that the option does not really work with many of the later platforms where PCIe pins/links/lanes are configured late in FSP-M or similar blob. Change-Id: I148f44c76c61edcfd8ab1c8c531cd2e6ca343130 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42227 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-06-14mb/google/volteer/var/terrador: Update dq/dqs mappingsDavid Wu
Update dq/dqs mappings based on terrador schematics. BUG=b:156435028,b:151978872 BRANCH=none TEST=FW_NAME=terrador emerge-volteer coreboot chromeos-bootimage Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I97697a3dd9b88eaffe6e2b1be7bd346979cbc956 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42247 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kane Chen <kane.chen@intel.corp-partner.google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-06-14soc/intel/xeon_sp/cpx: select CACHE_MRC_SETTINGSJonathan Zhang
FSP_NV_STORAGE HOB is supported in CPX-SP FSP ww22 release. Signed-off-by: Jonathan Zhang <jonzhang@fb.com> Change-Id: Ida06fa7f7c7937f4e66a83fdecbca8bc208d626f Reviewed-on: https://review.coreboot.org/c/coreboot/+/42024 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-14soc/amd/picasso: correct MCFG ACPI tableAaron Durbin
The start and end bus number in the MCFG ACPI table is inclusive. Therefore, the number of buses decoded needs to be subtracted by 1. BUG=b:158874061 Change-Id: Ic773bc1e0ccaa99af45d1a53919f6480887fa37e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42329 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-14mb/google/volteer: Enable thermal sensor 4 in DPTF for volteerDeepika Punyamurtula
Enables the fourth thermal sensor for fan in DPTF for volteer BRANCH=None BUG=b:149722146 TEST= On volteer system check `cat /sys/class/thermal/thermal_zone5/type` for TSR3 Signed-off-by: Deepika Punyamurtula <deepika.punyamurtula@intel.com> Change-Id: Ie11496828133aa71f1017f759516e2e5d3dff2d7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42317 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Roy Mingi Park <roy.mingi.park@intel.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2020-06-14dptf: Introduce new paradigm for configuring DPTF parametersTim Wawrzynczak
Currently, configuring and reviewing DPTF parameters is difficult because DPTF tables and methods are defined in static ASL files, and are littered with #ifdefs which both define parameters and influence behavior (e.g., whether a method is included or not). This patch train is an effort to bring DPTF support to our ACPI DSDT/SSDT generation framework. This first patch is very minimal, and includes only creation of the DPTF device (in the DSDT). BUG=b:143539650 TEST=compiles (later tests get more comprehensive). Change-Id: I14df9f422c911677aeea25552ac1822a9462c58a Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41883 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-02 08:34:49 +0000