summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2020-08-15cpu/x86/smm: Introduce SMM module loader version 2Rocky Phagura
Xeon-SP Skylake Scalable Processor can have 36 CPU threads (18 cores). Current coreboot SMM is unable to handle more than ~32 CPU threads. This patch introduces a version 2 of the SMM module loader which addresses this problem. Having two versions of the SMM module loader prevents any issues to current projects. Future Xeon-SP products will be using this version of the SMM loader. Subsequent patches will enable board specific functionality for Xeon-SP. The reason for moving to version 2 is the state save area begins to encroach upon the SMI handling code when more than 32 CPU threads are in the system. This can cause system hangs, reboots, etc. The second change is related to staggered entry points with simple near jumps. In the current loader, near jumps will not work because the CPU is jumping within the same code segment. In version 2, "far" address jumps are necessary therefore protected mode must be enabled first. The SMM layout and how the CPUs are staggered are documented in the code. By making the modifications above, this allows the smm module loader to expand easily as more CPU threads are added. TEST=build for Tiogapass platform under OCP mainboard. Enable the following in Kconfig. select CPU_INTEL_COMMON_SMM select SOC_INTEL_COMMON_BLOCK_SMM select SMM_TSEG select HAVE_SMI_HANDLER select ACPI_INTEL_HARDWARE_SLEEP_VALUES Debug console will show all 36 cores relocated. Further tested by generating SMI's to port 0xb2 using XDP/ITP HW debugger and ensured all cores entering and exiting SMM properly. In addition, booted to Linux 5.4 kernel and observed no issues during mp init. Change-Id: I00a23a5f2a46110536c344254868390dbb71854c Signed-off-by: Rocky Phagura <rphagura@fb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43684 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-14soc/intel/tigerlake: Increase PRERAM_CBMEM_CONSOLE_SIZE to 5KBRavi Sarawadi
This patch increases PRERAM_CBMEM_CONSOLE_SIZE from 3KB to 5KB to fix *** Pre-CBMEM romstage console overflowed, log truncated! *** issue. Bug=None Branch=None Test=Boot Delbin and check 'cbmem -c | more' for full log message. Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Change-Id: Id2ea64feb92ec29df5402b2fb1bac3ff73cc5bb3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43666 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-14soc/intel/skylake: Refactor PEG configurationFelix Singer
Simplify some if-blocks which are used for the configuration, enablement and disablement of the PEG devices. This changes the logic of the code, since it configures PegxEnable before the if-blocks, where x is the number of the PEG device, and the further configuration of the PEG devices depends on the enablement of PegxEnable. Change-Id: I6dd88ce752ce8f0255c424d0e5b2d8ef918885a1 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44368 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner
2020-08-14soc/intel/skylake: Factor out unnecessary if-else-blockFelix Singer
Move InternalGfx config option out of the if-else-block and replace the left over config option IgdDvmt50PreAlloc by a ternary expression. Also, adjust related code comments to fit the new logic of this code. This changes the logic of the code, since InternalGfx is configured first and IgdDvmt50PreAlloc depends on its value. The negation in the ternary expression is removed to improve the readability. Change-Id: I89ff17f4574a7ade228c1791f17ea072fb731775 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44369 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-08-14soc/intel/skylake: Use PEG definitions from pci_devs.hFelix Singer
Change-Id: I7114deed35f25e74ac508f08e9c85653a7fe39ed Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44367 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-08-14soc/intel/skylake: Add PEG device definitions to pci_devs.hFelix Singer
Change-Id: Ib2453425f44e2b4abd5566f454ae68b704dbc33e Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44366 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-08-14cpu/qemu-x86: Fix timestamp and bist reportingPatrick Rudolph
Change-Id: Id66a7f6767735862e138c58c4bcc9e68215dd3c5 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43002 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-08-14arch/x86/postcar: Add x86_64 supportPatrick Rudolph
* Add support for loading GDT on x86_64. * Add x86_64 assembly code to do the same as the x86_32 code. * Separate x86_32 and x86_64 code. Tested on qemu x86_32 and x86_64 using additional MTRRs. Tested on Lenovo T410 with additional x86_64 patches. Change-Id: I1c190627f5f0ed6f82738cb99423892382899d7b Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30500 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-14mb/google/volteer: Only enable TBT root ports if USB4 is supportedBrandon Breitenstein
TBT ports should be disabled if the DB is a USB3 DB. It is assumed if the DB doesn't support USB4 the platform as a whole should only be USB3 capable and TBT functionality on both ports should not be enabled. BUG=NONE BRANCH=NONE TEST=Built coreboot and verified that TBT was disabled on platform with USB3 DB and enabled on platform with USB4/TBT DB Change-Id: I594f2e9483aaf896de2b6aea9a3460bd3826c58c Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43771 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-08-14soc/amd/picasso/acpi: Set missing RTC offsetsRaul E Rangel
The RTC Date Alarm and RTC AltCentury fields are supported on picasso. These get consumed by the linux kernel: https://source.chromium.org/chromiumos/chromiumos/codesearch/+/master:src/third_party/kernel/v5.4/drivers/rtc/rtc-cmos.c;l=1243 BUG=b:160277722 TEST=Boot kernel and make sure suspend stress test works. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ie83d7e0a06107a6de095f3e4c521d91e90920c0b Reviewed-on: https://review.coreboot.org/c/coreboot/+/44448 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-14mb/google/dedede: Add a board specific resetKarthikeyan Ramasubramanian
When CSE Lite jumps from RO to RW, global reset is initiated. When AP is reset as part of global reset, TPM initialization fails. This is because AP reset is not detected by TPM hosting an older firmware version. Request Embedded Controller (EC) to perform AP reset so that TPM can detect that event. BUG=b:162290856, b:162386991 TEST=Ensure that the device boots to OS with the board-specific reset sequence when CSE Lite jumps from RO to RW with an older and newer Cr50 firmware. Cq-Depend: chromium:2337430 Change-Id: Ib1f7271130e0b4b68c7f0917ecc4eadba1486206 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44189 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2020-08-14mb/ocp/deltalake: enable VT-dJonathan Zhang
Update devicetree.cb to configure VT-d to be enabled. TESTED=booted on DeltaLake config A server, and verify DMAR table. Signed-off-by: Jonathan Zhang <jonzhang@fb.com> Change-Id: I7d76cd9d50d3e69a4919de281f11d30851bffa3f Reviewed-on: https://review.coreboot.org/c/coreboot/+/44281 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
2020-08-14soc/intel/xeon_sp/cpx: add VT-d supportJonathan Zhang
Intel CPX-SP FSP added support for VT-d through adding UPD parameter X2apic. Based on devicetree.cb setting, enable VT-d programming through FSP-M. When VT-d is enabled, add DMAR ACPI table. Signed-off-by: Jonathan Zhang <jonzhang@fb.com> Change-Id: Ic66374af6e53fb847c1bdc324eb3f4e01c334a94 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44280 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
2020-08-14soc/intel/xeon_sp/cpx: remove unsupported configsJonathan Zhang
coherency_support and ats_support are not supported by CPX-SP FSP. Remove them from soc_intel_xeon_sp_cpx_config struct. Remove corresponding settings from DeltaLake devicetree.cb. Signed-off-by: Jonathan Zhang <jonzhang@fb.com> Change-Id: Ibe1c4e88817fc4be7915e95fa829f0a4c0d947f2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44402 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
2020-08-14ec/google/chromeec: Add helper to request AP resetKarthikeyan Ramasubramanian
Add a helper function to initiate AP reset through Embedded Controller (EC). BUG=b:162290856 TEST=Ensure that the EC resets AP on boards where the command is supported. Change-Id: I01d7dfec72a8a3f6d2c4844bc062672e494860d8 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44188 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-14soc/intel/common/cse_lite: Perform a board specific resetKarthikeyan Ramasubramanian
When CSE Lite jumps from RO to RW, global reset is initiated. When AP is reset as part of global reset, in some boards TPM initialization fails. This is because AP reset is not detected by TPM hosting an older firmware version. To signal TPMs running older firmware version about AP reset, a modified reset sequence needs to be performed. Hence add support to perform board-specific reset sequence. BUG=b:162290856, b:162386991 TEST=Ensure that the device boots to OS with the board-specific reset sequence when CSE Lite jumps from RO to RW with an older and newer Cr50 firmware. Change-Id: I8663e7f25461e58e45766e2ac00d752bfa191d8b Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44187 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-14mb/ocp/deltalake: Select CONSOLE_POSTJohnny Lin
Tested=On OCP Delta Lake, BMC SOL can see POST codes Change-Id: I2c27055475e6dadcd4282cd1bf191a1b83150f02 Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44437 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-14mb/google/octopus/variants/casta: Disable xHCI compliance modeSeunghwan Kim
Disable xHCI compliance mode to prevent SS hub detection issue. BRANCH=firmware-octopus-11297.B BUG=none TEST=built Change-Id: I7a9bbc92565e752a8f8f4689519c100594596701 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44438 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-14mb/google/octopus: Set default value of ModPhyIfValue parameterSeunghwan Kim
Set default value of ModPhyIfValue parameter in FSPS_UPD. Without this setting, it will be set to '0' and system may not detect USB 3.0 device. BUG=b:163382089 BRANCH=firmware-octopus-11297.B TEST=Built Change-Id: Ide3d1637f99dba28251102f771b6ce370cc5d8e4 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44436 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-08-14vendercode/intel/fsp/fsp2_0/glk: Update FSP header file per v2.2.0Seunghwan Kim
Update FSP header file to match GLK FSP v2.2.0 BUG=none BRANCH=none TEST=none Change-Id: I515b4c44439e3404d3b06d587f0846457000fdb4 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44435 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marx Wang <marx.wang@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-08-14superio/ite/it8728f: Correct Kconfig selectionsMatt DeVillier
Per the datasheet and the it87 kernel driver, the IT8728F supports both 5 fans (vs 3) and use of a single 7-bit register for the PWM slope (5 bits in closed-loop mode). Change-Id: I3d1e6f5030f18d2c8ff533965ae4718be0f3c279 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44419 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-08-14superio/ite/common: Add support for closed-loop modeMatt DeVillier
Add support for tachometer closed loop mode, and programming of initial RPM vs initial PWM value. Change-Id: Idff29331c979f8518021103b6f8d19e75e657e3a Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44418 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-08-13mb/google/zork: Switch to using FW_CONFIG instead of SKU_IDBhanu Prakash Maiya
Currently sku_id is used to enable/disable eMMC as boot media on Dalboz. This patch will check eMMC bit in firmware configuration table to enable/disable eMMC. On Dalboz Proto and EVT devices with eMMC, there was an issue found after SMT. This patch checks for board_version instead of SKU_ID to configure eMMC in HS200. Configure HDMI based on daughterboard_id in FW_CONFIG. BRANCH=none BUG=b:152817444 TEST=Check eMMC is enabled or disabled based on the eMMC bit in FW_CONFIG. Signed-off-by: Bhanu Prakash Maiya <bhanumaiya@google.com> Change-Id: Ifa2a49a754d85fb6269f788c970bd9da58af1dad Reviewed-on: https://review.coreboot.org/c/coreboot/+/44421 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-13mb/google/zork: Use FW_CONFIG to enable/disable eMMC on EzkinilBhanu Prakash Maiya
Currently SKU_ID is used to enable/disable eMMC as boot media on Ezkinil. This patch will check eMMC bit in firmware configuration table to enable/disable eMMC. BRANCH=none BUG=b:162344105 TEST=Check eMMC is enabled or disabled based on the eMMC bit in FW_CONFIG. Signed-off-by: Bhanu Prakash Maiya <bhanumaiya@google.com> Change-Id: I62318cf71ec70790f2d9e787febd1e0b787741fb Reviewed-on: https://review.coreboot.org/c/coreboot/+/44423 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-13mb/google/zork: Add helper function to read DB ID bits in FW_CONFIGBhanu Prakash Maiya
Add helper function variant_get_daughterboard_id() to read daughterboard id bits (0-3) in firmware configuration table in CBI. BRANCH=none BUG=b:162344105,b:152817444 TEST=Check if daughterboard id bits (0-3) can be read from FW_CONFIG. Signed-off-by: Bhanu Prakash Maiya <bhanumaiya@google.com> Change-Id: Ia3c882439bfbe6da28be2df0ec0c976d5c142677 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44424 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-13mb/google/zork: Remove validity checks for FW_CONFIG in CBIBhanu Prakash Maiya
After confirming that all zork variants and phases have valid FW_CONFIG value in CBI, this patch is dropping FW_CONFIG validity checks like VARIANT_HAS_FW_CONFIG and VARIANT_BOARD_VER_FW_CONFIG_VALID in Kconfig and will also remove associated helper functions. BRANCH=none BUG=b:162344105,b:152817444 TEST=Check if FW_CONFIG bits can be read in coreboot and FW_CONIFG helper function do not return 0 if board has a valid FW_CONFIG in CBI. Signed-off-by: Bhanu Prakash Maiya <bhanumaiya@google.com> Change-Id: I633dc7c500ef8759f3fffb0db6b76d96257c3c9a Reviewed-on: https://review.coreboot.org/c/coreboot/+/44422 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-13mb/intel/tglrvp: Set gpio GPP_H1 for soundcard detectionShaunak Saha
This patch sets the GPP_H1 to PAD_CFG_GPO which is general purpose output with no pullup/down. We need this GPIO for the detection of soundcard in TGL RVP's. BUG=none BRANCH=none TEST=Build and boot tglrvp successfully. From "aplay -l" output check that soundcards are listed properly. Change-Id: Ic0ef33079af7940360c986efacabd6d367aad516 Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41811 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2020-08-13vc/amd/picasso/bl_uapp: Update header fileMarshall Dawson
Update to match the 0.8.6.7B release of PSP blobs. BUG=b:163857965,b:137123167 TEST=Boot Trembyle, run SST Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Change-Id: I728dc17ba2cfb40bc6eaaa30556a3f6bc57d18f6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44428 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-13superio/*/Makefiles: Remove non-existing directory inclusionElyes HAOUAS
Change-Id: I080f5b67c6e555fcc025ec11a1d15dddfe3a546d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44317 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-13soc/intel/skylake: Refactor ternary expressionsFelix Singer
To be consistent with the rest of the tree, replace all left ternary expressions, which are used for device enablement / disablement, with `dev && dev->enabled`. Change-Id: Ie7afa48bf2c8bdad5a043f7cb6953d05b7b6597d Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44365 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-08-13mb/asus: Add Asus A88XM-E FM2+ with documentationBalazs Vinarz
The port is based on the F2A85-M, the main differences are: - 2 DDR3 dimms - 2 PS/2 ports - 2*USB2.0 and 2*USB3.0 ports - 3+2 phase VRM - 6 channel audio - 6 SATA ports - ASP1206 VRM controller - Bolton D4 chipset - no optical SPDIF/IO Successfully booted configurations: -RAM: 2*8GB Kingston KVR 1333Mhz LP, 2*8GB Crucial BLT8G3D1869DT1TX0 -CPU: AMD A8-6500 (Richland), AMD A10-6700 (Richland) -OS: Arch Linux 4.19 (SATA, USB), Linux Mint 19.3, Artix Linux 2019 -SeaBIOS: 1.12 and 1.13 Known problems: - IRQ routing is done incorrect way - common problem of fam15h boards - Windows 7 can't boot because of the incomplete ACPI implementation Change-Id: I60fa0636ba41f5f1a6a3faa2764bf2f0a968cf90 Signed-off-by: Balazs Vinarz <vinibali1@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30987 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-13drivers/intel/fsp2_0: don't select FSP_USES_CB_STACK on FSP 2.0 platformFelix Held
soc/amd/picasso selected FSP_USES_CB_STACK even though it is FSP 2.0 based, so it doesn't reuse coreboot's stack, but sets up its own stack. In contrast to all other FSP 2.0 based platforms, this stack isn't in the CAR region, since AMD Picasso doesn't support CAR and the DRAM is already available when the x86 cores are released from reset. Selecting FSP_USES_CB_STACK ended up doing the right thing, but is semantically wrong. Instead of wrongly selecting FSP_USES_CB_STACK in soc/amd/picasso we take the corresponding code path if ENV_CACHE_AS_RAM is false which is only the case for non-CAR platforms. BUG=b:155501050 TEST=Timeless build results in an identical binary for amd/mandolin, asrock/h110m-dvs and intel/coffeelake_rvp11 which cover all 3 cases here. Change-Id: Icd0ff8e17a535e2c247793b64f4b0565887183d8 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44406 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-08-13soc/intel/xeon_sp/cpx: add CPUID for CPX-SP A1 processorJonathan Zhang
Add CPUID for CPX-SP A1 (also called QS) processor. DeltaLake DVT server uses CPX-SP A1 processor. TESTED=booted DeltaLake DVT server to target OS. [root@localhost ~]# dmidecode -t 1 Getting SMBIOS data from sysfs. SMBIOS 3.0 present. Handle 0x0001, DMI type 1, 27 bytes System Information Manufacturer: Wiwynn Product Name: Delta Lake DVT Version: YoDL03 Serial Number: BZA02200122N01A UUID: 000A0A22-2C29-1ED6-8259-000055DA2BFF Wake-up Type: Reserved SKU Number: Not Specified Family: DeltaLake Signed-off-by: Jonathan Zhang <jonzhang@fb.com> Change-Id: Ic8975f6bf752fd685b38b2d1f0a4da41983b57f6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44357 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-08-13mb/google/volteer/var/halvor: Update dq/dqs mappingsFrank Wu
Update dq/dqs mappings based on halvor schematics. BUG=b:162892573 BRANCH=none TEST=FW_NAME=halvor emerge-volteer coreboot chromeos-bootimage Then boot Halvor successfully. Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Change-Id: Id4ffcbd4f015afe6507ed2b1d562519c5b240409 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44284 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2020-08-13mb/google/volteer/halvor: Enable card reader function on HalvorFrank Wu
Configure gpio settings for enabling card reader function. BUG=b:153680359 TEST=FW_NAME=halvor emerge-volteer coreboot chromeos-bootimage Verify that the sd card is mount on /dev/mmcblk0 successfully. Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Change-Id: I51752f47bc8d31d3a11da728ce00ca754381fde9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44169 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-13soc/mediatek/mt8192: Add spi driverQii Wang
Add driver for MT8192 SPI controller TEST=Boots correctly on MT8192EVB Signed-off-by: Qii Wang <qii.wang@mediatek.com> Change-Id: I2094dd2f14ad19b7dbd66a8e694cc71d654a2b4b Reviewed-on: https://review.coreboot.org/c/coreboot/+/43960 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2020-08-13sb/intel/bd82x6x/me_8.x.c: Relocate `mkhi_end_of_post`Angel Pons
This reduces the differences between both ME source code files. Tested with BUILD_TIMELESS=1, Asus P8Z77-V LX2 does not change. Change-Id: I08e07ca2691bb854682692476153a98967bf05da Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44340 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-08-13soc/intel/common/block: Stitch CSE blobs into FW_MAIN_X partitionsSridhar Siricilla
Add Kconfig option for CSE me_rw blob path and stitch the me_rw blob into FW_MAIN_X partitions. BUG=b:145796136 Change-Id: I1d2908e9e16858c5f333e1b10b19d18b7ca27765 Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35406 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-13security/vboot/Makefile.inc: Update regions-for-file functionSridhar Siricilla
This patch updates regions-for-file function in the security/vboot/Makefile.inc to support adding a CBFS file into required FMAP REGIONs in a flexible manner. The file that needs to be added to specific REGIONs, those regions list should be specified in the regions-for-file-{CBFS_FILE_TO_BE_ADDED} variable. For example, if a file foo.bin needs to be added in FW_MAIN_B and COREBOOT, then below code needs to be added in a Makefile.inc. regions-for-file-foo := FW_MAIN_B,COREBOOT cbfs-file-y := foo foo-file := foo.bin foo-type := raw TEST=Verified on hatch Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I1f5c22b3d9558ee3c5daa2781a115964f8d2d83b Reviewed-on: https://review.coreboot.org/c/coreboot/+/43766 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-08-13mb/google/asurada: Add new MT8192 mainboard "Asurada"CK Hu
The placeholder functions and build rules for generating a minimal firmware to run on MT8192 SOC based mainboard "Asurada". Signed-off-by: CK Hu <ck.hu@mediatek.com> Change-Id: Ic7c8bc8a4bba40d1b511823e09945be52198b247 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43963 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-13soc/mediatek/mt8192: Add DRAM resource in ramstageCK Hu
Add DRAM resource in ramstage to load payload. Signed-off-by: CK Hu <ck.hu@mediatek.com> Change-Id: Iac02f81fc7d47851b3bba442eb7043169fbdbcfb Reviewed-on: https://review.coreboot.org/c/coreboot/+/44410 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2020-08-13soc/mediatek/mt8192: Initialize build rulesCK Hu
The first Makefile to support building minimal stage files for MT8192 SOC. Signed-off-by: CK Hu <ck.hu@mediatek.com> Change-Id: I2cf68805532f70f072b4e9a21ee61e2ebe4ebd9d Reviewed-on: https://review.coreboot.org/c/coreboot/+/43962 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-13soc/mediatek/mt8192: Add a placeholder for the EMI driverCK Hu
Add minimal function to report SDRAM size. Signed-off-by: CK Hu <ck.hu@mediatek.com> Change-Id: If74b6b52dd6e91d1ff40cf8460b6a03b2f3bb6f6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43961 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-13mb/google/zork: Update PICASSO_FW_*_POSITION to match new layoutFurquan Shaikh
CB:44362 ("mb/google/zork: Reorganize chromeos.fmd to increase WP_RO to 8MiB") updated the flash layout which moved RW_SECTION_A and RW_SECTION_B to different addresses than before. PICASSO_FW_A_POSITION and PICASSO_FW_B_POSITION configs need to be updated accordingly to retain the same behavior as before i.e. amdfw_a/b are placed at the start of FW_MAIN_A/B by placing them right after the CBFS header. This change fixes the value of PICASSO_FW_A_POSITION and PICASSO_FW_B_POSITION to maintain amdfw at the start of RW-A/B CBFS. BUG=b:161949925 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I177fb38af6380c36397d2a72d5ec00965087d528 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44425 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-13mb/google/zork: Disable ACP I2S wake for schematic version 3.6+Furquan Shaikh
Starting with v3.6 of reference schematics, headphone jack interrupt is moved to a standard GPIO instead of using CODEC_GPI. Thus, we no longer need I2S wake to be enabled in the ACP for boards using v3.6+ version of schematics. This change sets `acp_i2s_wake_enable` and `acp_pme_enable` to default 0 in baseboard devicetrees and overrides to 1 in update_hp_int_odl() if the board is still using older version of reference schematics. BUG=b:159934887 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I44b40db95b5148fe483c7340c5bd0d58627970a7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44403 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-13drivers/intel/fsp2_0: Fill EFI_CPU_PHYSICAL_LOCATION structure informationSubrata Banik
Latest EDK2 code inside "UefiCpuPkg\Library\RegisterCpuFeaturesLib\CpuFeaturesInitialize.c" is now looking for EFI_CPU_PHYSICAL_LOCATION structure variables hence coreboot need to fill required information (package, core and thread count). TEST=Able to see package, core and thread information as part of FSP debug log. Change-Id: Ieccf20a116d59aaafbbec3fe0adad9a48931cb59 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44390 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
2020-08-13vendorcode/intel/fsp: Update Tiger Lake FSP Headers for FSP v3313Srinidhi N Kaushik
Update FSP headers for Tiger Lake platform generated based FSP version 3313. Previous version was 3274. Changes Include: 1. Update comments 2. Fix comment typos 3. UPD offset updates BUG=b:163582213 BRANCH=none TEST=build and boot volteer proto2 Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: I2784c5b7c8f71c1355c1c36a27cc88080c7c2647 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44399 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Dossym Nurmukhanov <dossym@google.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2020-08-12mb/intel/tglrvp: Add interrupt _CRS under CREC scopeJohn Zhao
Interrupt _CRS is missing under CREC scope. TGLRVP U/Y has GPP_A15 assigned to MECC_HPD2 as EC_SYNC_IRQ. Configure this GPP_A15 GPIO as active low and level interruptible for EC sync interrupt configuration. BUG=None TEST=Booted to kernel and verified EC_SYNC_IRQ in the scope of CREC current resource settings. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: Idfe4d4e800866805ee8d758028ac7ddf4b259faa Reviewed-on: https://review.coreboot.org/c/coreboot/+/44103 Reviewed-by: Vijay P Hiremath <vijay.p.hiremath@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-12mb/google/volteer/halvor: Update settings for WiFi/BT functionsFrank Wu
Configure gpio/overridetree settings for WiFi/BT functions. Then WiFi/BT functions are enabled on Halvor. BUG=b:153680359, b:163004808 TEST=FW_NAME=halvor emerge-volteer coreboot chromeos-bootimage Verify that WiFi/BT can scan devices successfully. Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Change-Id: I085b192bb768c2c1238f3f857d315502ac10857e Reviewed-on: https://review.coreboot.org/c/coreboot/+/44372 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-12mb/google/zork: expose stop gpio for trembyleAaron Durbin
In CB:43701 the trembyle touchscreen parameters were not updated to expose the stop gpio properly. BUG=b:162973325 Change-Id: I6f5da1c556ba1c6ccabf699491d3b635aa79f7c0 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44254 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-12soc/intel/cannonlake: Set FSP-M UPD Heci1BarAddressSridhar Siricilla
The patch sets FSP-M UPD Heci1BarAddress to avoid disconnect between coreboot and FSP-M. Currently coreboot uses 0xfeda2000 as a PCI BAR address for CSE device while FSP-M uses 0xfed1a000. So, after FSP-M call, CSE's BAR address is overridden with 0xfed1a000. This causes HECI transactions to fail between FSP-M call and postcar. BRANCH=puff TEST=Verified sending HECI commands before and after FSP-M call on hatch. Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I371cb658a96f5d580faff32ffab013cb6e6c492c Reviewed-on: https://review.coreboot.org/c/coreboot/+/44211 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-08-12mb/google/dedede/variants/drawcia: add DTT supportSumeet R Pawnikar
Add DTT (Dynamic Tuning Technology) support on Jasper Lake based drawcia system. Add information on sensors, power limits and tcc_offset for DTT based thermal control. BRANCH=None BUG=b:161993459 TEST=Built for dedede system Change-Id: If50052864fb246a6a8f7d96fa50529e5f55968c0 Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44148 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-08-12soc/amd/common/espi_util: rename espi_check_statusFelix Held
espi_poll_status describes better what the function actually does, since it polls the status register instead of just doing a single read to check. Change-Id: I0feeef5504bd911e1fb0a00d4f4c546df3548db2 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44354 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-12sb/intel/bd82x6x: Make `pch_silicon_supported` staticAngel Pons
It's not needed anywhere else. Change-Id: Ibc02e432bbc669b3fcfcb8add3c7b0c2a9f77d77 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44339 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-12sb/intel/lynxpoint: Move IOBP API to its own compilation unitAngel Pons
Change-Id: Icb6114302cebe19bc3c1971929ea4fc085b454be Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41946 Reviewed-by: Michael Niewöhner Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Jonathan Kollasch <jakllsch@kollasch.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-12nb/intel/sandybridge: Add comments to `struct iosav_ssq`Angel Pons
Add the ranges of bitfields as comments on the struct. Change-Id: Ib20a233806bfbdc9a81a77f4ef10f67a3cd2dc0e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44338 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Michael Niewöhner
2020-08-12sb/intel/i82801jx/sata.c: Simplify constant is_mobile parameterAngel Pons
Tested with BUILD_TIMELESS=1, Intel DG43GT does not change. Change-Id: I30cdca0240afced2949639193caa2f11aca1c60d Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44337 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Michael Niewöhner
2020-08-12sb/intel/i82801jx/sata.c: Drop always-false is_mobile checkAngel Pons
Also remove the meaningless `sata_traffic_monitor` devicetree option. Function parameters will be removed in a reproducible follow-up. Change-Id: I70cf1e06cc8ace504a22be9f9c4441e3070f9e29 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44336 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-08-12sb/intel/i82801jx: Drop is-mobile checksAngel Pons
There's no mobile ICH10 variant. This was copied from i82801ix. Change-Id: I141da407e336f6fbbf84d0e2cee55b0c12931c7b Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44335 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Michael Niewöhner
2020-08-12sb/intel/i82801ix/lpc.c: Align with i82801jxAngel Pons
Tested with BUILD_TIMELESS=1, Roda RK9 does not change. Change-Id: I9445fac7db0a96b6a28ccf307f5ccedc1f94b8ab Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44334 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-08-12sb/intel/i82801ix: Use macros for LPC_ENAngel Pons
Taken directly from i82801jx code. Tested with BUILD_TIMELESS=1, Roda RK9 does not change. Change-Id: I0a5dc274e0058144e6e7f734c848b6b5962cba85 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44333 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-08-12sb/intel/i82801jx/early_init.c: Drop double blank lineAngel Pons
Change-Id: Ia37c5feb5a61793c10496a2d9cabb7661aa758b4 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44332 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Michael Niewöhner
2020-08-12sb/intel/i82801ix/early_init.c: Drop unnecessary initial valueAngel Pons
Tested with BUILD_TIMELESS=1, Roda RK9 does not change. Change-Id: I17903dfe7b18a9244d0c102768dd153941f125a2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44331 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Michael Niewöhner
2020-08-12sb/intel/i82801ix/i82801ix.c: Align with i82801jxAngel Pons
Tested with BUILD_TIMELESS=1, Roda RK9 does not change. Change-Id: Icbb6cb45155991f9d4b3bcff37e1e9d99483acdc Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44330 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-08-12sb/intel/bd82x6x: Remove incorrect RCBA registersAngel Pons
These were probably copy-pasted from some ICHx southbridge, and then some were corrected because native PCH init uses them. Delete the definitions which are unused and are invalid for this southbridge. Change-Id: I0be72f76c7fcc63316ae8566891e0732456a8c55 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44329 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-08-12sb/intel/lynxpoint: Remove incorrect RCBA registersAngel Pons
These were probably copy-pasted from some ICHx southbridge. However, datasheet shows that some of these are located elsewhere, and some others have disappeared completely. As they aren't in use, drop them. Change-Id: I2d09547bdbfd5f8f72ce3541347d9fec28630c79 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44328 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Michael Niewöhner
2020-08-12sb/intel: Remove inexistent references to IDE controllerAngel Pons
This device doesn't exist on these southbridges. Change-Id: Ie17427ba044c465adf95300ff7f5610c25ae3373 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44327 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-08-12volteer: Create lindar variantJulia Tsai
Create the lindar variant of the volteer reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.1.2). BUG=b:161089195 BRANCH=None TEST=util/abuild/abuild -p none -t google/volteer -x -a make sure the build includes GOOGLE_LINDAR Signed-off-by: Julia Tsai <julia.tsai@lcfc.corp-partner.google.com> Change-Id: I08923cde932b7304bcb01cd747530c87949e4692 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44074 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Zhuohao Lee <zhuohao@google.com> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-12soc/intel/common/block/sata: Add common SATA driverSubrata Banik
Enable PCI_COMMAND_MASTER for SATA controller to ensure device can behave as a bus master. Otherwise, the device can not generate PCI accesses. BUG=b:154900210 TEST=Able to build and boot CML and TGL platform. Change-Id: Icc6653c26900354df4ee6e5882c60cbe23a5685c Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44299 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-12mb/prodrive/hermes: Add multifunction device for UART 2Christian Walter
On CNP-H, only four I2C controllers are available, so PCI devices 19.0 and 19.1 are missing. However, PCI device 19.2 still exists as UART 2. That function 0 is missing means UART 2 can only be used in ACPI mode. Both devices need to be marked as hidden on the devicetree so that the allocator takes UART 2 into account. Change-Id: Ie77198cc0327414b9f88cf15ba4efaddb4f5cca4 Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43481 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-08-12soc/intel/tigerlake: Add IRQs for LPSS uartPatrick Rudolph
Values are taken from pci_irqs.asl. The common code will make use of those defines to generate ACPI SSDT code for LPSS uarts operating in "ACPI mode". Change-Id: I5ef93493965834cda30d70918e65de3129e547b7 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44260 Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-12mb/google/zork: Reorganize chromeos.fmd to increase WP_RO to 8MiBFurquan Shaikh
This change reorganizes flash map layout for zork to allow WP_RO to grow to 8MiB. This is to allow more space for the firmware UI screens in RO. Following changes are made in the layout: 1. MRC_CACHE_HOLE is dropped since only one slot of 64K is used for MRC cache. Next section can start on 64K boundary immediately after MRC cache. 2. RW_SECTION_A and RW_SECTION_B are dropped down in size to 3MiB each. Each region is currently at ~2MiB of usage. 3. RW_ELOG is restrictred to 4KiB as that is the maximum elog size supported by coreboot. 4. SMMSTORE is restricted to 4K. 5. RW_LEGACY region is dropped down to ~1.9MiB. BUG=b:161949925 TEST=Verified that write-protection for RO still works fine, device boots in recovery and non-recovery mode. Also, verified that the dump of fmap looks correct: dump_fmap -h firmware/image-trembyle.serial.bin name start end size WP_RO 00800000 01000000 00800000 RO_SECTION 00804000 01000000 007fc000 COREBOOT 00875000 01000000 0078b000 GBB 00805000 00875000 00070000 RO_FRID 00804800 00804840 00000040 FMAP 00804000 00804800 00000800 RO_VPD 00800000 00804000 00004000 RW_LEGACY 0061d000 00800000 001e3000 SMMSTORE 0061c000 0061d000 00001000 RW_NVRAM 00617000 0061c000 00005000 RW_VPD 00615000 00617000 00002000 RW_SHARED 00611000 00615000 00004000 VBLOCK_DEV 00613000 00615000 00002000 SHARED_DATA 00611000 00613000 00002000 RW_ELOG 00610000 00611000 00001000 RW_SECTION_B 00310000 00610000 00300000 RW_FWID_B 0060ff00 00610000 00000100 FW_MAIN_B 00312000 0060ff00 002fdf00 VBLOCK_B 00310000 00312000 00002000 RW_SECTION_A 00010000 00310000 00300000 RW_FWID_A 0030ff00 00310000 00000100 FW_MAIN_A 00012000 0030ff00 002fdf00 VBLOCK_A 00010000 00012000 00002000 RW_MRC_CACHE 00000000 00010000 00010000 SI_BIOS 00000000 01000000 01000000 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I882f3d813c08ba5fb0ad071da4f79e723296f4b0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44362 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Joel Kitching <kitching@google.com>
2020-08-12mb/google/kukui: revise per-device memory mapping tableHung-Te Lin
In order to help identifying right DRAM info (especially in user space), we want to unify the mapping table and do the device-specific mapping by a virtual offset based on build config. BUG=b:161768221,b:159301679 BRANCH=kukui TEST=emerge-jacuzzi coreboot Change-Id: If89bf18c48d263deb79df3e7a60c33bec000d8a3 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43987 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2020-08-12soc/mediatek/mt8192: Add PLL and clock init supportWeiyi Lu
Add PLL and clock init code. TEST=Boots correctly on MT8192EVB. Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com> Change-Id: Ia49342c058577e8e107b7e56c867bf21532e40d2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43958 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2020-08-12soc/mediatek/mt8192: Add gpio driverCK Hu
Add MT8192 GPIO driver. Signed-off-by: Po Xu <jg_poxu@mediatek.com> Change-Id: I4b230aebc9eb4ca1bbf444c3a2f30159d707f37b Reviewed-on: https://review.coreboot.org/c/coreboot/+/43959 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-12soc/mediatek/mt8183: Transfer ddr geometry type to dram blobHuayang Duan
BUG=none BRANCH=kukui TEST=Boots correctly on Kukui Change-Id: I3a677195f5036321939c60c8f9f1bace7c4a2e3f Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43796 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2020-08-11amd/picasso/acpi: Add power resources for UART0Kangheui Won
Follow-up for a31a769 - "amd/picasso/acpi: Add power resources for I2C and UART". Now PSP properly handles UART0 D3, we can shutdown UART0. BUG=b:158772504 TEST=suspend_stress_test for 50 cycles, * echo 1 > /sys/module/acpi/parameters/aml_debug_output * dmesg | grep FUR to check on&off for FUR0 [ 2413.647500] ACPI Debug: "AOAC.FUR0._OFF" [ 2413.736265] ACPI Debug: "AOAC.FUR0._ON" Change-Id: I25457e18b69d28a83e42c2fe02b45a3979ad58cd Signed-off-by: Kangheui Won <khwon@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44266 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-08-11cpu/intel: Remove Core 2 Duo E8200 CPUID from model_6fxAngel Pons
With a CPUID of 10676, it is clearly model_1067x... Wait, it's already there, but the comment is wrong. This ID isn't for Core Duo CPUs. Change-Id: Ia4b73537805e2a8fa9e28bde76aa20a524f8f873 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44247 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-08-11soc/intel/common/block/gspi: Recalculate BAR after resource allocationJes Klinke
The base address of the memory mapped I/O registers should not be cached across resource allocation. This CL will evict the cached value upon exiting the BS_DEV_RESOURCES stage. Change-Id: I81f2b5bfadbf1aaa3b38cca2bcc44ce521666821 Signed-off-by: jbk@chromium.org Reviewed-on: https://review.coreboot.org/c/coreboot/+/44084 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-11vendorcode/intel/fsp/fsp2_0/CPX-SP: remove non-existing PSTACKsJonathan Zhang
CPX-SP has a CSTACK and 3 PSTACKs. Clean up the HOB header file to remove reference to non-existing PSTACKs. Adjust mainboard code accordingly. Signed-off-by: Jonathan Zhang <jonzhang@fb.com> Change-Id: Ic52b01cd89fb5b3fce64686d91f017f405566acd Reviewed-on: https://review.coreboot.org/c/coreboot/+/44279 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-11xeon_sp/cpx: Enable PCH thermal device via FSPJohnny Lin
Tested=On OCP Delta Lake, OpenBMC sensor-util can see PCH Temp readings. Change-Id: I39d0d0a982476f9fece51cfa19dcbd0da5dea690 Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44075 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-11soc/amd/picasso: Correct processor ACPI scopeJason Glenesk
Change namespace from _PR to _SB. Cq-Depend: chrome-internal:3208104 BUG=b:153242529 TEST=Boot a trembyle with change applied and dump SSDTs to ensure processors are in _SB scope. Change-Id: I534f02dc50756759da945cf64d5b3623b0ec9db1 Signed-off-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44325 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-11soc/amd/common/espi_util: espi_send_command: improve error messageFelix Held
It's only an error if bits other than ESPI_STATUS_DNCMD_COMPLETE are set in the status register. If ESPI_STATUS_DNCMD_COMPLETE isn't set, the command failed, so we expect that one to be set. Change-Id: I6f1fb5a59b1ecadd6724a07212626f21fb90e7e7 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44352 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-11soc/amd/common/espi_util: espi_std_io_decode: fix edge case bugFelix Held
When address and data register for the SIO control register access is passed as one I/O region with a size of 2, the corresponding special decode enable register should be used instead of a generic one to save the rather limited generic ones for other decode ranges. Change-Id: Ie54ff6afa2bd2156f7b3a3cf83091f1f932b6993 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44351 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-11soc/amd/common/espi_util: simplify espi_std_io_decode functionFelix Held
We can just return at all places where the ret variable was written before its value gets returned at the end of the function. Change-Id: Id87f41c0d9e3397879ac3d15b13179cca1a1263f Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44350 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-11soc/amd/common/espi_util: make decode enable parameter uint32_tFelix Held
Since this is a bit mask applied to the raw value of a 32 bit register, this should be a 32 bit unsigned type. Change-Id: I9d9930963d8c827a84dc1f67e2f2fa8f95ab40f2 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44349 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-11soc/amd/common/espi_util: make reg parameter unsignedFelix Held
Th register number passed to the low level read/write functions should never be negative. Change-Id: I5d7e117b3badab900d030be8e69ded026d659f8a Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44348 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-11soc/amd/stoneyridge/acpi: clean up global NVSFelix Held
Some fields in GNVS seem to be copied over from Apollolake to Stoneyridge. This patch removes the unused fields. Change-Id: I135c4a4547668fe67e74d0ea9ae3a03c3687375f Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44184 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-08-11mb/google/zork: config ddi for dirinbozKevin Chiu
dirinboz does not support native HDMI, config DDI as below: DDI0: eDP DDI1: DP DDI2: DP BUG=b:161579679 BRANCH=master TEST=1. emerge-zork coreboot chromeos-bootimage 2. power on proto board successfully Change-Id: I9dffdf5654680e3c2c0b259ee82a471f8ff14f56 Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44343 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-08-11mb/google/zork: fix incorrect DRAM SPD table load for dirinbozKevin Chiu
BUG=b:161579679 BRANCH=master TEST=1. emerge-zork coreboot chromeos-bootimage 2. power on proto board successfully Change-Id: Ia736b0f25824eebe4ef25a11646f82963611e3b3 Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44341 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-08-11mb/google/zork: move USB OC pin mapping to trembyle base boardFelix Held
The USB OC pin mapping is similar enough to move it to the base board and just have two overrides for trembyle, which is based on an older version of the schematics, and one override for woomax, which doesn't use one USB port. BUG=b:163081097 Change-Id: I7e305d7e6f51d7ef7a4c699e3bacc6bcd699d2f2 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44269 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-08-11nb/intel/sandybridge/raminit: Add commentsPatrick Rudolph
Add comments found when testing ECC scrubbing code. This is a cosmetic change. Change-Id: I7975f6070c2002930eec407a6b101a1295495b25 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40947 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-11nb/intel/sandybridge/raminit: Fix ECC scrubPatrick Rudolph
The scrubbing method was never correct nor tested. Fix that by observations made on mrc.bin. Tested on HP Z220 with ECC memory and Xeon E3 CPU: The whole memory is now scrubbed. Change-Id: Ia9fcc236fbf73f51fe944c6dda5d22ba9d334ec7 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40721 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-11nb/intel/sandybridge/raminit: Add ECC debug codePatrick Rudolph
* Add ECC test code when DEBUG_RAM_SETUP is enabled * Move ECC scrubbing after set_scrambling_seed() to be able to observe what has been cleared in the test routine. If clearing happens before set_scrambling_seed the data is XORed with a different PRN. Data read from memory will look random instead of all zeros. * ECC scrubbing must happen after dram_dimm_set_mapping() The ECC logic is set to "normal mode" in dram_dimm_set_mapping(). In normal mode the ECC bits are calculated and stored on write transactions. * Move method out of try_init_dram_ddr3(). This satisfies point 2 and point 3 of the list above. Change-Id: I76174ec962c9b0bb72852897586eb95d896d301e Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40946 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-10mb/google/volteer: Pull up GPP_D16 instead of driving itCaveh Jalali
The latest realtek RTS5261 SD daughterboard exposes the PRSNT# pin to GPP_D16 but there is a RTS5261 requirement to pull up this pin and not drive it at power on. We can meet this requirement without breaking other boards by changing GPP_D16 to be a no-connect with an internal pull up. Other boards use this signal as an enable input, so changing this to pull up is OK. BUG=b:162722965 TEST=Verified RTS5261 and GL9755 daughterboards enumerate on PCI and can read SD cards. Change-Id: I096d76ec12b7c3afaf02e621fd301b6704913d5d Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44116 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-08-10mb/google/volteer/var/terrador: Update gpio settings for Proto2David Wu
Based on latest schematic and gpio table of terrador, update gpio settings for terrador Proto2. BUG=b:151978872 TEST=FW_NAME=terrador emerge-volteer coreboot chromeos-bootimage Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I64b4fcbaabc487206d14d794af319e6df6f99581 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44164 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2020-08-10mb/tgl: Enable SaGv for TGL-UP3 RVPShreesh Chhabbi
BUG=none BRANCH=none TEST=Build and boot TGL-UP3 RVP with QS silicon successfully. Change-Id: I5b84457a1455edfe500ce80ba7f7ca6ccce43666 Signed-off-by: Shreesh Chhabbi <shreesh.chhabbi@intel.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43276 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-10superio/ite: allow 24 MHz clock for external sensor interfaceMichael Büchler
The interface selection register of the environment controller (EC) gives the choice between "Internal generated 32 MHz" and "24 MHz" for the "SST/PECI Host Controller Clock Selection". Previously the chip was always configured for the 32 MHz clock. Add an option that can be set from devicetree.cb to allow using the 24 MHz clock. Without this setting the automatic fan control on an Acer Aspire M3800 was slow to respond to temperature changes. Signed-off-by: Michael Büchler <michael.buechler@posteo.net> Change-Id: Ib2bce10a828fb4a7d837f6c5f5b1d00cc51be0ce Reviewed-on: https://review.coreboot.org/c/coreboot/+/44166 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-10superio/ite: configure EC for fans to full at thermal limitMichael Büchler
This applies to the automatic fan control mode of the environment controller (EC). Previously the affected bit was always cleared while the default value is 1 according to datasheets. Add a variable that can be set per mainboard in devicetree.cb. In the IT8783E datasheet that bit is marked as reserved. Signed-off-by: Michael Büchler <michael.buechler@posteo.net> Change-Id: Ie74102ac0d54be33558c161c9c84594d121772b1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44165 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-08-10mb/lippert: Put files under variants/Angel Pons
This isn't reproducible for some reason, but it is relatively simple. Change-Id: I507229be71ac2c589c7ecd81495d38ce363d26a7 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43275 Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>