Age | Commit message (Collapse) | Author |
|
The BUC register is actually 8 bits wide and shouldn't be bluntly
cleared.
Change-Id: I2ffd2d161005e839e730102b56af4f66efeb551e
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36892
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Only set LPC decode bits that the generic PCH code doesn't set yet. And
don't enable the IOAPIC, which is already done by generic code.
Change-Id: I9d2f6a9ad3f5d83573e07596f2763edc75f4ee64
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36891
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This bit is already cleared by a reset.
Change-Id: Ib71496011c9621476a7327ba309f367c7fa971e4
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36890
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This bit is used to indicate xHCI routing across reboots. If anything,
coreboot should act on it, not set it during boot. ASL code would be
supposed to set it.
Change-Id: Id14647ac4e591cfa042ca8aad6dfc6ccda35c74a
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36889
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
The generic PCH code already enables a superset of LPC decoding. Move
UART setup to bootblock_mainboard_early_init() where it is expected.
Last but not least, remove an odd write to BUCs (RCBA+0x3414) and
beyond, as it's an 8-bit register and shouldn't be bluntly zeroed.
Change-Id: I24a4ccf6a529460a83f48522d2e05e6ad6614f81
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36888
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
The generic PCH code already sets up a superset of these decodings.
Change-Id: I90bca37c46b89c35f323225fc3c087f1630397e4
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36887
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
mainboard_pch_lpc_setup() and mainboard_late_rcba_config() did 4
things here on top of the generic PCH code:
1. Enabling LPC decoding for gameports. It seems unlikely
that anything is using these ports and there is no code
to support gameports.
2. Decoding of COM3 instead of COM2. What COM?
3. Premature locking of ETR3/global reset. Bad idea.
4. Disabling the GbE port in BUC. Already done by PCH code.
Change-Id: Ie92dbf5c6813435995c4d24ed807ffc8d125953a
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36886
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Change-Id: Ia041b63201b2a4a2fe6ab11e3497c460f88061d1
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36784
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Change-Id: I198709efe1eb5d2022d0fbd640901238e696eaa6
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36885
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
There is some overlap between romstage and bootblock.
LPC setup and BAR initialization is now done twice.
The rationale is that the romstage should not depend too
much on the bootblock, since it can reside in a RO fmap
region.
Enabling the console will be done in a followup patch.
Change-Id: I4d0ba29111a5df6f19033f5ce95adcc0d9adc1fd
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36783
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The romstage default is to set stack guards at 0x2000 below end
of stack. The code is now overwrites some of the stack guards
so increase the stack size to a comfortable 0x2800.
Change-Id: I91f559383a987241b343e743d11291f2c100f7f5
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36884
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
This also changes the name to mainboard_pch_lpc_setup to better
reflect that it is an optional mainboard hook.
This adds an empty weakly linked default. The rationale behind this
change is that without an implementation of the hook some features
might not work but that the result is likely still able to boot, so it
can be made optional.
Change-Id: Ie8e6056b4c4aed3739d2d12b4224de36fe217189
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36782
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
This also changes the name to mainboard_late_rcba_config to better
reflect what it does.
This adds an empty weakly linked default. The rationale behind this
change is that without an implementation of the hook some features
might not work but that the result is likely still able to boot, so it
can be made optional.
Change-Id: I1897d0f5ca7427d304a425f5256cd43c088ff936
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36781
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
This always builds the usb debug callback functions when implemented.
They get garbage collected if CONFIG_USBDEBUG is not set.
Change-Id: I33051df583645cd00d08e06774383763172d5822
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36881
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mike Banon <mikebdp2@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: I425583377cba8d57acabfd59922f421d1fb5891f
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36883
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The declarations in usb_debug.c needs to be guarded in order to not
conflict with other chipsets.
Change-Id: I84c3401b9419f2878c2cfdf81147fa854018f9ae
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36878
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Mike Banon <mikebdp2@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This adds an empty weakly linked default. The rationale behind this
change is that without the callback some features might not work
but that the result is likely still able to boot, so it can be made
optional.
Change-Id: I62c8010aa81fc45d208e9293feb2f45b45f34a82
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36780
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
RCBA32(V0CTL)= 0x80000001 already done inhere i945/early_init.c
Change-Id: Ia775f4e6158a217b48629d289845537e7ccf5e79
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36877
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
In order to always show the bootlogo very early in coreboot we need the
option to always enable the display when VBOOT is enabled.
To do this a config option is added to make sure this functionality can
be provided without interfering with systems that require the standard
VBOOT display handing.
BUG=N/A
TEST=tested on facebook fbg1701.
Change-Id: I3ffaac85d2082717bb9608d536f7cec66a583789
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36547
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Leave more space for PreRAM memconsole especially for seeing complete
logs when doing DRAM full calibration (that outputs in 200+k to UART):
- Shrink Full-K mem space (the ELF blob today needs ~132K)
- Move PRERAM_CBFS_CACHE to L2C since it's no used after DRAM is up
- Shrink TIMESTAMP to 1k (all other non-MTK ARM SOCs use only 1k)
- Incease PRERAM_CBMEM_CONSOLE to 63k-4
- Reordered few sections to align at better locations
BUG=b:144542023
TEST=emerge-kukui coreboot chromeos-bootimage; boot and see logs
Change-Id: I8696fb01653c0a581cf62e687dc523cb6fed9a32
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36859
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Setting GPP_A10 to NC now that older boards are deprecated and this
GPIO is not in use anymore.
BUG=b:142056166
BRANCH=hatch
TEST=./util/abuild/abuild -p none -t google/hatch -x -a
Change-Id: If8a249a3dcba90bb4ccb5e3f02595e680f789f93
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36869
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The eltan security items ended up in the chipset menu which is not
desired. Now the eltan security option (when enabled in mainboard) shows
up in the security menu.
BUG=N/A
TEST=build
Change-Id: I3b2aa3836e8d9a3242c6d1f3ba7b7821a5cfb9d3
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36851
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
|
|
These mainboard don't feature a SPI flash. The SPI init code
will timeout on probing for a SPI flash which takes a lot of time.
Not including all SPI drivers also lightens the uncompressed ramstage
of about 17K or 7K compressed.
Change-Id: Icc7bf62d56fc2ef38854402e658830b8d59c737f
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36870
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
On devices lacking SPI boot devices there is a hefty timeout
penalty on probing for flash chips and this code would not
be useful anyway.
Change-Id: I0bec11372ef54c1e1e611b81f7013932257f4ca6
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36868
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The verified_boot_check_cbfsfile() will now try to allocate a buffer from
bootmem if the item in the list has the VERIFIED_BOOT_COPY_BLOCK attribute
set. For large payloads this speeds up the hash operation.
BUG=N/A
TEST=build
Change-Id: Ifa0c93632c59d05ae6d32f8785009a3c3568abc5
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36822
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
|
|
vboot_possibly_executed previously provided some better
compile-time code elimination, before CB:32716 made
vboot_logic_executed capable of that directly.
BUG=b:124141368,
TEST=make clean && make test-abuild
BRANCH=none
Change-Id: If5ca8f03c51e1ced20e1215b1cfdde54da3d001f
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36863
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The comment in the source referred to an earlier approach, so update
it to match current reality.
Change-Id: I9a23ec0a719fb623cfd465c397ef7ef16550b93c
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36862
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Joel Kitching <kitching@google.com>
|
|
The old code stumbled when the whole first group of root ports
was disabled and also made the (sometimes wrong) assumption
that FSP would only hide function 0 if we explicitly told it
to disable it.
Change-Id: Ia6938ca6929c6d9d0293c4f0f0421e38bf53fb55
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36702
Reviewed-by: Michael Niewöhner
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Most of the current implementations for FSP-based platforms
make (sometimes wrong) assumptions how FSP reorders root ports
and what is specified in the devicetree. We don't have to make
assumptions though, and can read the root-port number from the
PCIe link capapilities (LCAP) instead. This is also what we do
in ASL code for years already.
This new implementation acts solely on information read from
the PCI config space. In a first round, we scan all possible
DEVFNs and store which root port has that DEVFN now. Then, we
walk through the devicetree that still only knows devices that
were originally mentioned in `devicetree.cb`, update device
paths and unlink vanished devices.
To be most compatible, we work with the following constraints:
o Use only standard PCI config registers.
o Most notable, don't try to read the registers that
configure the function numbers. FSP has undocumented
ways to block access to non-standard registers.
o Don't make assumptions what function is assigned to
hidden devices.
The following assumptions were made, though:
o The absolute root-port numbering as documented in
datasheets matches what is read from LCAP.
o This numbering doesn't contain any gaps.
o Original root-port function numbers below a PCI
device start at function zero and also don't
contain any gaps.
Change-Id: Ib17d2b6fd34608603db3936d638bdf5acb46d717
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35985
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Michael Niewöhner
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
There is some overlap between things done in bootblock
and romstage like setting BARs.
Change-Id: Icd1de34c3b5c0f36f2a5249116d1829ee3956f38
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36759
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ic6ea158714998195614a63ee46a057f405de5616
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36796
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
Console init in bootblock will be done in a separate CL.
Change-Id: Ia2405013f262d904aa82be323e928223dbb4296c
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36795
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This adds callbacks for mainboard specific init.
Change-Id: Ib67bc492a7b7f02f9b57a52fd6730e16501b436e
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36787
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This adds 3 mb romstage callbacks:
- void mb_lpc_setup(void) to be used to set up the superio
- void mb_get_spd_map(u8 spd_map[4]) to get I2C addresses of SPDs
- (optional)mb_pre_raminit_setup(int s3_resume) to set up mainboard
specific things before the raminit.
Change-Id: Ic3b838856b3076ed05eeeea7c0656c2078462272
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36758
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
On mainboards without DPTF_TSRX_SENSOR_ID method DTRP is never called
Only add the DTRP method when at least one sensor is enabled.
BUG=N/A
TEST=build
Change-Id: I4fb26d5bbb7b334e759e7073b680f830f412467e
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36856
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add IFD and ME binary to generate complete SPI image.
BUG=N/A
TEST=Boot Embedded Linux 4.20 on Facebook FBG-1701
Change-Id: I9370bf9f2bba8887988bc6484524f6cf53bed8db
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34448
Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The prepare() callback is no longer utilized in the code. Remove
the callback and support for it.
Change-Id: Ic438e5a80850a3df619dbbfdecb522a9dc2c1949
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36690
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
|
|
This patch renames pch_early_init() function as per review feedback
CB:36550
Change-Id: I9f638e738d1a910b688cc3e51795230b2e542f82
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36841
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
|
|
Change-Id: If932582d03bb2f6d3d14c9bce45cf2030f3b3c4e
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36838
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
Add a new Kukui follower 'kakadu'.
BUG=None
TEST=make # select kakadu
Change-Id: I9f25ce90285828c43435e45d9361ee7128d407fa
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36848
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add semtech SAR sensor.
BUG=b:143449140
BRANCH=octopus
TEST=Boot kernel with sx931x driver, i2cdetect show UU on slave address.
Change-Id: Icfb8acf1bac73973748aa7443c95147c60bad770
Signed-off-by: Pan Sheng-Liang <sheng-liang.pan@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36850
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
GPIOs related to power sequnce are
GPIO_67 - EN_PP3300
GPIO_117 - FULL_CARD_POWER_ON_OFF
GPIO_161 - PLT_RST_LTE_L
1. Power on: GPIO_67 -> 0ms -> GPIO_117 -> 30ms -> GPIO_161
2. Power off: GPIO_161 -> 30ms -> GPIO_117 -> 100ms -> GPIO_67
3. Power reset:
- keep GPIO_67 and GPIO_117 high and
- pull down GPIO_161 for 30ms then release it.
BUG=b:144327240
BRANCH=octopus
TEST=build image and verify on the DUT with LTE DB.
Change-Id: I68b71425391eda1e92806fecdb9c8dcd54f0b95a
Signed-off-by: Pan Sheng-Liang <sheng-liang.pan@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36771
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Henry Sun <henrysun@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Remove the logo.bmp file from the verify list when FSP1_1_DISPLAY_LOGO
is not set.
BUG=N/A
TEST=build
Change-Id: I87eac0b3cbe9450d5623b5331d8de096f140b595
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36853
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Changed the order of the verify lists and updated the comments to
reflect the order of execution. This makes the list easier to understand
and maintain.
BUG=N/A
TEST=tested on fbg1701
Change-Id: Ia656fbf07e5d42bafd328eaba69b660e5a1e4f1a
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36817
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change from hardcoded "fallback/*" to using CONFIG_CBFS_PREFIX.
BUG=N/A
TEST=tested on fbg1701
Change-Id: Ie728d01ebb93edd88516e91528ecaaa3f139b7a9
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36819
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
|
|
The public key should only be validated if the manifest is signed.
BUG=N/A
TEST=testedd on fbg1701
Change-Id: I703ed442e0b1926859f593ce9ca84133013224ea
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36816
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
|
|
Cleanup of the prog_locate_hook routine so the actual coreboot flow is
more clearly reflected in the code.
Remove logging that is not really needed.
BUG=N/A
TEST=tested on fbg1701
Change-Id: Iab6c75beac35d043d296336021c0bce1f828cf34
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36846
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The prepare functionality will be removed from cbfs support and the
eltan verified boot is the only software using it. This is not really
required as we can use the prog_locate_hook() for this functionality.
BUG=N/A
TEST=tested on fbg1701
Change-Id: I189cbad4b24bbbb0840ce6100c89a42a327c5456
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36821
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
|
|
Some of the verify lists were added to the include file while others are
on vboot_check.c. Also added the ramstage_verify_list.
BUG=N/A
TEST=tested on fbg1701
Change-Id: If4f1d8b2278277d0af78e357ecce0d5bef441179
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36820
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Removed unused include file.
BUG=N/A
TEST=build
Change-Id: I040b695a893b51de06f9658abdca8867727f053d
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36818
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
|
|
The postcar_verify_list should contain the items that should be verified
before the postcar stage is started.
BUG=N/A
TEST=build
Change-Id: I328858e4803873fed6d47313def5e7b9a434e8ad
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36815
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
|
|
The bootblock measurement was handled using the romstage_verify_list()
and the public_key in the mb_log_list. This is confusing as these are
both read-only items that should be handled in the same way.
Both will be handled in the romstage_verify_list().
BUG=N/A
TEST=tested on fbg1701
Change-Id: If05198deec85188f39a221a8b755798755afa5bb
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36814
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
|
|
Removed long lines from the verified_boot_check_buffer() function.
BUG=N/A
TEST=build
Change-Id: I2ea0ae82bd531355111d6b45c67bdc2b1759b7bc
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36849
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
|
|
Since now we have persistent context, the usage of the flags can be
replaced with vb2_context.flags.
BRANCH=none
BUG=chromium:1021452
TEST=emerge-kukui coreboot
Change-Id: I8e5757a8cc09712c3acde9cbaab910b7498681b4
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36808
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
vb2_context object is now stored on the workbuf as part of
vb2_shared_data. Use vboot's new API functions vb2api_init
and vb2api_relocate to create and move the workbuf.
BUG=b:124141368, chromium:994060
TEST=Build locally
BRANCH=none
Change-Id: I051be1e47bf79b15a1689d49a5d4c031e9363dfa
Signed-off-by: Joel Kitching <kitching@google.com>
Also-Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/1902339
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36300
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
|
|
Change-Id: I008fcca024fecf462c4b550b8dedbf4b06e491b8
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36368
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When CB:33068 disabled the bootblock console on RK3288, it saved a
whooping 7K of SRAM, but it didn't readjust the stage boundaries to
spread that bounty evenly. This patch moves 4K of free space from the
bootblock to verstage/romstage to allow for future expansion.
Change-Id: I68a09ba80bde0d4f17fba1f7b38c63b7cf2a4672
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36826
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
An empty submenu Intel is displayed in security menu when INTEL_TXT is
disabled.
Enable submenu Intel only when INTEL_TXT is enabled.
BUG=N/A
TEST=build
Change-Id: Iff1d84ff60a15259b60c6205a63a27ecb26346a3
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36852
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Change-Id: I18948d31c0bf0bf9d641480a35fc710b9ee8ae84
Signed-off-by: Xiang Wang <merle@hardenedlinux.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35119
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Currently supports initialization, read, write, and erase operations.
Tested on HiFive Uneashed
implementation follows SD association's SPI access protocol, found
as doc http://t.cn/AiB8quFZ
Change-Id: I464d2334b8227e448c1c7e324c0455023cffb72a
Signed-off-by: Xiang Wang <merle@hardenedlinux.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35118
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Correct typo of 'uninitialized'
BUG=N/A
TEST=build
Change-Id: I43c6eb0287d23546a2abb330c7cc8585a33b27b5
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36776
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Support to display a logo using FSP 1.1 currently resides in facebook fbg1701
mainboard.
The related support is moved to drivers/intel/fsp1_1 and used by the
Facebook fbg1701 mainboard. The storage for the uncompressed logo
is changed. We don't use .bss any longer as the logo doesn't need to be
available at runtime.
BUG=N/A
TEST=booting Facebook fbg1701
Change-Id: I276e6e14fc87d0b95fe5fdf7b617afd26769de79
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36679
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
|
|
The northbridge code to set up DMI is not correct and the CIR bits
relate to that.
This fixes a regression caused by 2437fe9 'sb/intel/i82801gx: Move CIR
init to a common place', where payloads hang on southbridge IO.
Change-Id: Iabb54d9954d442a1a7b48a6c6e76faa8079a4c71
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36809
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
One functional change is that southbridge GPIO init is moved
after console init.
Change-Id: I53e6f177aadcdaa8c45593e0a8098e8d3c400d27
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36757
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Setting southbridge GPIO is now done after console init,
which should be fine. This code is partially copied from
i82801ix.
Change-Id: I51dd30de4a82898b0f1d8c4308e8de4a00d1b7aa
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36756
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Remove some of the code duplication on i82801gx.
x4x boards are left untouched for now since that northbridge
also supports i82801jx.
The order of some things has changed:
- on i945 early_ich7_init is now done before the raminit
- enabling the IOAPIC is done before the raminit
Change-Id: Ie39549938891e17667a8819b49a78b9c71c8ec9e
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36754
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Clean the vendor/manufacturing information in 16G_3200_4bg spd to
become generic spd.
BUG=None
TEST=emerge-hatch coreboot
Change-Id: I163dc4631a6b71efd36c75cfe1fc759040113387
Signed-off-by: Wisley Chen <wisley.chen@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36810
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
1. ram id 8: 16G 2666 2 bank groups memory
2. ram id 9: 16G 3200 4 bank groups memory
BUG=b:142762387
TEST=boot with memory (KAAG165WA-BCT/H5ANAG6NCMR-XNC)
Change-Id: Ic63d911458b59de11c12ce776f6f7d04b1eb3b6c
Signed-off-by: Wisley Chen <wisley.chen@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36667
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch performs below operations
1. Add few more MCH, ESPI and IGD IDs
2. Remove TGL-H IDs
3. Rename existing as per applicable names
4. Remove TODO from report_platform.c file
5. Include TGL IDs into report_platform.c file
Change-Id: I7bb3334d0fe8ba72e394d1a63b3a73840b4eaf2f
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36768
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
|
|
This file is only included in romstage.
Change-Id: Ib9ee6e88e7a6ef81034de608232a05e92a16d5f4
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36773
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
The CBFS master header is a legacy structure that just conveys the same
information we already have from the FMAP these days. We're still
including it to support older CBFS implementations in some payloads, but
there's no need for coreboot itself to follow this indirection anymore.
This patch simplifies the default CBFS locator to just return the CBFS
offset and size from the FMAP directly.
Change-Id: I6b00dd7f276364d62fa1f637efbaee0e80607c49
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36688
Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds an optional pre-RAM cache for the FMAP which most
platforms should be able to use, complementing the recently added
post-RAM FMAP cache in CBMEM. vboot systems currently read the FMAP
about half a dozen times from flash in verstage, which will all be
coalesced into a single read with this patch. It will also help
future vboot improvements since when FMAP reads become "free" vboot
doesn't need to keep track of so much information separately.
In order to make sure we have a single, well-defined point where the new
cache is first initialized, eliminate the build-time hardcoding of the
CBFS section offsets, so that all CBFS accesses explicitly read the
FMAP.
Add FMAP_CACHEs to all platforms that can afford it (other than the
RISC-V things where I have no idea how they work), trying to take the
space from things that look like they were oversized anyway (pre-RAM
consoles and CBFS caches).
Change-Id: I2820436776ef620bdc4481b5cd4b6957764248ea
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36657
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Joel Kitching <kitching@google.com>
|
|
This patch makes the CBFS default locator .locate() callback externally
available so that code which overrides cbfs_master_header_locator can
reuse or wrap it and doesn't have to copy&paste the whole thing. Use it
for the Eltan vendorcode implementation which previously did this.
Change-Id: I54dad5c8ea64ea0fc472217e275daa815736991e
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36797
Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Make these more consistent with later platforms. Followups will
do a more complete refactoring of set_acpi_mode() implementations.
Change-Id: I6a05b7600ebdc49915157eaff229459a1eea754c
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36790
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
PARALLEL_MP path also calls smm_lock().
Change-Id: I270fc8266d118cd1e7245ea70b707a03aedac209
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36789
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Change-Id: Ic807f4b4fc26232301f81c8076daf31fe58f217b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36788
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Instead of using MAX of (cores_enabled, MAX_CPUS), use MIN
which is correct.
TEST=tested with dmidecode
Change-Id: Id0935f48e73c037bb7c0e1cf36f94d98a40a499c
Signed-off-by: Andrey Petrov <anpetrov@fb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36662
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
All stages on this board are very close to the limit, so enable
RETURN_FROM_VERSTAGE so that we can overlap verstage and romstage to
use the available SRAM more effectively. (Coincidentally, this also
reduces verstage size quite a bit... maybe we should consider just
making this the default at some point, there are really no downsides.)
Change-Id: I2b91fd13d147f964bcbd7b2850f8a0931ea060df
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36800
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The normal romcc bootblock uses this.
Change-Id: I60f735f703a9208911f5cc8a81930535e574644d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36755
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The structs and function definition in that header require it.
Change-Id: I3466ff1a28459d0285e27d368314faf747e2eac1
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36769
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
This removes some of the sb code in the nb.
Change-Id: I2ab894be93f210220fa55ddd10cd48889f308e5b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36753
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
BUG=b:144297264
TEST=Boot with W25Q128JW_DTR and check MRC data save/restore works.
Signed-off-by: Peichao Wang <peichao.wang@bitland.corp-partner.google.com>
Change-Id: Ica6344556e5de94555b95dd7c6df5600614811e2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36762
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
|
|
Static declarations for use with SMM_ASEG conflict those
declared globally for use with SMM_TSEG.
Change-Id: I8d2984cd8fe6208417b2eda0c10da8fc7bb76cf1
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35892
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Set GPP_C4 default to low to fix leakage voltage problem on touchscreen during power on.
BUG=b:142368161
BRANCH=Master
TEST=emerge-hatch coreboot chromeos-ec chromeos-bootimage
Flash FW to DUT, and make sure touchscreen works.
Signed-off-by: Kane Chen <kane_chen@pegatron.corp-partner.google.com>
Change-Id: Ie9197192c9d6dfb30c10559990c6010b1b2d3a45
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36670
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Shelley Chen <shchen@google.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
bootmem_allocate_buffer() displayed "unitialized", this is changed to
"uninitialized".
BUG=N/A
TEST=build
Change-Id: I84ae689ddb24f3e3d2387735faf3850e6bd6dfa9
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36772
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This code lacks the temp_ram_init_params sybols so the FSP-T option
so it would fail to build.
Change-Id: Ie7d75943d89a964d0189f921fc433e4b9adfb0c5
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36720
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Michael Niewöhner
|
|
This code lacks the temp_ram_init_params sybols so the FSP-T option
fails to build.
Change-Id: I2b6278bd64a3579ed3460af39ea244c7dfd51da4
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36719
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Michael Niewöhner
|
|
Created helios_diskswap as a variant of helios (hatch variant).
BUG=b:143378037
BRANCH=None
TEST=none
Change-Id: I6536b3908ec569e1ac42ea7c5be85701012ab177
Signed-off-by: Alexis Savery <asavery@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36447
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This is more in line with how linker symbol for regions are defined.
Change-Id: I0bd7ae59a27909ed0fd38e6f7193816cb57e76af
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36695
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
1. Add 16G 2666 2 bank group
2. Add 16G 3200 4 bank group
BUG=b:142762387
TEST=boot with memory (KAAG165WA-BCT/H5ANAG6NCMR-XNC)
Change-Id: I04810091ef2bf8ec1bd306ad141a70436638eac8
Signed-off-by: Wisley Chen <wisley.chen@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36665
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
|
|
This patch replaces and cleans up the redundant PTN3460 driver files in
/mainboard/siemens directories by using the now available driver in
src/drivers/i2c/ptn3460 and providing mainboard specific functions to
the driver.
TEST=Display is working on Siemens mainboards (e.g. mc_tcu3, mc_apl1, ...).
Change-Id: I976a502e7176a356bab772758250db3cdff529b9
Signed-off-by: Uwe Poeche <uwe.poeche@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36643
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch provides a chip driver for the DP-2-LVDS bridge PTN3460.
The bridge is configured via I2C. As the mainboard has all the
information regarding the attached LCD type, there are three hooks into
mainboard code to get the information like EDID data and PTN config.
TEST=Display is working on Siemens mainboards (e.g. mc_tcu3, mc_apl1, ...).
Change-Id: Ie4c8176cd16836fa5b8fd2f72faf7a55723b82f6
Signed-off-by: Uwe Poeche <uwe.poeche@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36642
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Change-Id: Id706da33f06ceeec39ea50301130770226f0474e
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36701
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Generic LPC decode ranges can now be set from the devicetree.
Change-Id: I1065ec770ad3a743286859efa39dca09ccb733a1
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36700
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This mainboard needs VT-d to be enabled. Do so in devicetree.
Change-Id: I9f2f733163be019ac329660d7633b48c5d7896f1
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36749
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
|
|
This cleans .config from unused UDK_VERSION's symbol.
Change-Id: I2a17db711f615d388dbd964f67ff2cc7875c54fb
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34536
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
CONFIG_SOC_INTEL_COMMON_BLOCK_SA_FSP_TOLUM
CB:36620 moves common cbmem_top_chipset to fsp driver hence no need to have
dedicated kconfig as in SOC_INTEL_COMMON_BLOCK_SA_FSP_TOLUM
Change-Id: I3914993754ba409867399e903e5d13e929a92e1d
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36765
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
New boards introduced to Kukui family.
BUG=None
TEST=make # select damu and kappa
Change-Id: I7154aeee921114b7d12bf586adca250df19a3883
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36699
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Discussed in CB:36093, in the past many lenovo boards need to declare
an empty h8_mainboard_init_dock() to satisfy h8.c.
Now the confusing H8_DOCK_EARLY_INIT might be retired, and if a
mainboard needs dock init (done with h8_mainboard_init_dock() in the
past) in ramstage, (discussed in CB:4294 where H8_DOCK_EARLY_INIT is
introduced) it can just do it in its own chip_ops.enable_dev function.
Tested on X200. Testing on other affected targets may be necessary.
Change-Id: I5737406d1f6cb6e91b2e2fa349a206a3dba988d1
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36385
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Don't select the VBOOT fmap as default if VBOOT is disabled.
Fixes a regression introduced by f8251b98
"mb/emulation/qemu: Add VBOOT support" where the default Kconfig settings
wouldn't allow the qemu boards to run.
Also fix the Supermicro x11-lga1151 series boards.
Change-Id: I90414e2cc7e4c4a6ad67014bd4a7f9c8ff4da389
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36707
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|