summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2020-12-09mb/google/volteer: Reorganize FMAPFurquan Shaikh
This change reorganizes FMAP for volteer to make use of the lower 16MiB of the SPI flash for RW_SECTION_A and RW_MISC in addition to RW_LEGACY. This is now possible because TGL supports memory mapping of BIOS region greater than 16MiB. Following changes are made in chromeos.fmd as part of this: 1. Move RW_SECTION_A and RW_MISC to lower 16MiB. 2. Reduce size of RW_LEGACY to 2MiB since we longer need to use it as a placeholder in the lower half of the SPI flash. 3. Reduce size of RW_ELOG to 4KiB as coreboot does not support a larger region for ELOG. 4. Increase WP_RO to 8MiB to allow larger space for firmware screens. GBB size is thus increased to 448KiB. BUG=b:171534504 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I0c3c0af94183a80c23d196422d3c8cf960b9d9f5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48187 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-12-09soc/intel/tigerlake: Enable support for extended BIOS windowFurquan Shaikh
This change enables support for extended BIOS window by selecting FAST_SPI_SUPPORTS_EXT_BIOS_WINDOW and providing base and size of the extended window in host address space. BUG=b:171534504 Cq-Depend: chromium:2566231 Change-Id: I039155506380310cf867f5f8c5542278be40838a Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48186 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
2020-12-09mb/google/dedede: Update Boten GPIO setting for PEN detection.Stanley Wu
AP_PEN_DET_ODL isolated by a diode and need to pull up internally. BUG=b:160752604 BRANCH=dedede TEST=Build and confirm waveform by google EE parter. Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com> Change-Id: I85f3d0209094af07891a5c0cc218443da586e6e2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48294 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-09mb/google/zork/var/vilboz: Update telemetry settingsJohn Su
Update telemetry settings. VDD Slope : 32643 -> 26939 VDD Offset: 208 -> 125 SOC Slope : 22742 -> 20001 SOC Offset: -83 -> 168 BUG=b:171668654 BRANCH=zork TEST=1. emerge-zork coreboot 2. pass AMD SDLE test report Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Change-Id: Ic63e069310aa4a66cd4c9058790dbed37e6967f4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48288 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-09mb/intel/adlrvp: Add PMC.MUX.CONx device config for Conn2V Sowmya
This patch adds the PMC MUX and CONx devices for adlrvp for conn2. BUG=b:170607415 TEST=Built and booted adlrvp. Verified the PMC.MUX CONx objects in SSDT tables. Change-Id: I52afbd429750cfa416f4ed93aeb1be590f8c3a5c Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48230 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-09mb/google/dedede/var/metaknight: Support Elan/Synaptics touchpadTim Chen
Add Elan and Synaptics touchpad settings. BUG=b:169813211 BRANCH=None TEST=build metaknight firmware Change-Id: Ice0a86cd5610db269d44acb1d51cb652110d9b0c Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47441 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raymond Wong <wongraymond@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-12-09mb/google/dedede/var/metaknight: Add audio related settingsTim Chen
Add HDA,speaker codec and speaker amp settings. BUG=b:169813211 BRANCH=None TEST=build metaknight firmware Change-Id: I9b1057eac94b568914f17fcccee58a0e403ccec0 Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47438 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raymond Wong <wongraymond@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-12-09soc/amd/picasso/southbridge: drop unused sb_enableFelix Held
Change-Id: I10a16c8f9db994ff33407619a7ab6e453b026b15 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48440 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-12-09soc/amd/picasso: split southbridge into bootblock and ramstage codeFelix Held
The ramstage parts gets renamed to fch.c and the bootblock one to early_fch.c. No functionality from the old southbridge file is used in romstage, so don't link it there. Change-Id: I7ca3b5238c3b841191dd0459996b691edd76fbf8 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48439 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-12-09soc/amd/cezanne: select common ACPIMMIO blockFelix Held
Change-Id: I7f7d11d84733a43500b0135e565d91fe5c493279 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48438 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-12-09soc/amd: factor out functionality to print last reset sourceFelix Held
Change-Id: I5cec38dac7ea27aa316f5dd4f91ed84627a0f937 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48437 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-12-09soc/amd/common/block/acpimmio: use all-y for mmio_util targetFelix Held
Since mmio_util gets also linked into verstage on PSP, all-y can be used here. Change-Id: I03572d760b485938f0d00b6cead00746eda6ca09 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48436 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-09soc/amd: factor out legacy I/O and cf9 decode enable functionsFelix Held
Replace sb prefix with fch prefix, since those are all FCHs and no south bridges any more. Verstage on PSP uses the I/O access mechanism instead of the MMIO one, so keep a separate function for that, but also move it to the common mmio_util file to have them all in one place. Change-Id: I47dac9ee3d9e27f7b7a5fddab17cf4fc10de6c3e Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48435 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-09soc/amd/common/block/smbus: refactor fch_smbus_initFelix Held
Move the setup of the base address to a separate function and explicitly set the SMBUS and ASF I/O port decode even though it is expected to already be set after reset. Change-Id: I8072ab78985021d19b6528100c674ecdd777e62e Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48434 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-12-09soc/amd: factor out PM_DECODE_EN register definitionsFelix Held
Change-Id: I005709a8780725339e7c08fbfff94e89c8ef26da Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48433 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-12-09soc/amd: remove unused PM_ISA_CONTROL definitionsFelix Held
ACPIMMIO_DECODE_REGISTER_04 is the definition in the common ACPIMMIO code block that actually gets used. Also fix the indentation of the ACPIMMIO register decode defines in the common code. Change-Id: Ib2c460541be768fe05d8cc3d19a14dbd9c114a45 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48432 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-12-09soc/amd/stoneyridge/southbridge: make sb_disable_4dw_burst staticFelix Held
sb_disable_4dw_burst is only used in the same compilation unit, so no need to make it externally visible. Change-Id: I6c7c96f67b98fb8ed808f45a7685c4d72a10d32c Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48431 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-12-08mb/google/deltaur: Restrict RW_DIAG to lower 16MiBFurquan Shaikh
This change restricts RW_DIAG region to lower 16MiB to ensure that the extended BIOS checker for FMAP does not complain about 16MiB boundary crossing. I haven't updated any other regions to occupy the newly freed space but it is fine since this board is dead and should be dropped from coreboot soon. Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I19ab204fbe3e020e42baf68bfa350dcff32066a3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48190 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-12-08mb/intel/tglrvp: Restrict SI_ME region to lower 16MiBFurquan Shaikh
This change restricts SI_ME region to live below the 16MiB boundary to ensure that no regions cross the 16MiB boundary as the extended BIOS window checker for FMAP complains about it. Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: Ib0838ff4c63b06b8dc169b40d3022965b2f2f8f9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48189 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-12-08soc/intel/common/fast_spi: Add Lockdown of extended BIOS regionSrinidhi N Kaushik
This change adds support to Lock down the configuration of extended BIOS region. This is done as part of fast_spi_lockdown_cfg() so that it is consistent with the other lockdown. Change includes: 1. New helper function fast_spi_lock_ext_bios_cfg() added that will basically set EXT_BIOS_LOCK. BUG=b:171534504 Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: I730fc12a9c5ca8bb4a1f946cad45944dda8e0518 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48068 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-08soc/intel/common/fast_spi: Add support for configuring MTRRsSrinidhi N Kaushik
This change enables caching for extended BIOS region. Currently, caching is enabled for the standard BIOS region upto a maximum of 16MiB using fast_spi_cache_bios_region, used the same function to add the support for caching for extended BIOS region as well. Changes include: 1. Add a new helper function fast_spi_cache_ext_bios_window() which calls fast_spi_ext_bios_cache_range() which calls fast_spi_get_ext_bios_window() to get details about the extended BIOS window from the boot media map and checks for allignment and set mtrr. 2. Make a call to fast_spi_cache_ext_bios_region() from fast_spi_cache_bios_region (). 3. Add new helper function fast_spi_cache_ext_bios_postcar() which does caching ext BIOS region in postcar similar to 1. 4. If the extended window is used, then it enables caching for this window similar to how it is done for the standard window. BUG=b:171534504 Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: I9711f110a35a167efe3a4c912cf46c63c0812779 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47991 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-08src/soc/intel/tigerlake: Add SPI DMI Destination IDSrinidhi N Kaushik
This change adds the SPI-DMI Destination ID for tigerlake soc. This is needed for enabling support for extended BIOS region. Also, implements a SOC helper function soc_get_spi_dmi_destination_id() which returns SPI-DMI Destination id. BUG=b:171534504 Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: I0b6a8af0c1e79fa668ef2f84b93f3bbece59eb6a Reviewed-on: https://review.coreboot.org/c/coreboot/+/47989 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-12-08soc/intel/common/fast_spi: Add extended decode window supportSrinidhi N Kaushik
This change enables support for configuration of extended BIOS region decode window. This configuration needs to be performed as early as possible in the boot flow. This is required to ensure that any access to the SPI flash region below 16MiB in coreboot is decoded correctly. The configuration for the extended BIOS window if required is done as part of fast_spi_early_init(). Changes include: 1. Make a call to fast_spi_enable_ext_bios() before the bus master and memory space is enabled for the fast SPI controller. 2. Added a helper function fast_spi_enable_ext_bios() which calls fast_spi_get_ext_bios_window() to get details about the extended BIOS window from the boot media map. 3. Depending upon the SPI flash device used by the mainboard and the size of the BIOS region in the flashmap, this function will have to perform this additional configuration only if the BIOS region is greater than 16MiB 4. Adddditionally, set up the general purpose memory range registers in DMI. BUG=b:171534504 Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: Idafd8be0261892122d0b5a95d9ce9d5604a10cf2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47990 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-08soc/intel/common/dmi: Add DMI driver supportSrinidhi N Kaushik
This change allows configuring the General Purpose Memory Range(GPMR) register in BIOS to set up the decoding in DMI. This driver provides the following functionality: 1. Add a helper function dmi_enable_gpmr which takes as input base, limit and destination ID to configure in general purpose memory range registers and then set the GPMR registers in the next available free GMPR and enable the decoding. 2. Add helper function get_available_gpmr which returns available free GPMR. 3. This helper function can be utilized by the fast SPI driver to configure the window for the extended BIOS region. BUG=b:171534504 Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: I34a894e295ecb98fbc4a81282361e851c436a403 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47988 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-08coreboot tables: Add SPI flash memory map windows to coreboot tablesFurquan Shaikh
This change adds details about the memory map windows to translate addresses between SPI flash space and host address space to coreboot tables. This is useful for payloads to setup the translation using the decode windows already known to coreboot. Until now, there was a single decode window at the top of 4G used by all x86 platforms. However, going forward, platforms might support more decode windows and hence in order to avoid duplication in payloads this information is filled in coreboot tables. `lb_spi_flash()` is updated to fill in the details about these windows by making a call to `spi_flash_get_mmap_windows()` which is implemented by the driver providing the boot media mapping device. BUG=b:171534504 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I00ae33d9b53fecd0a8eadd22531fdff8bde9ee94 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48185 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-08soc/intel/common/systemagent: Reserve window used for extended BIOS decodingFurquan Shaikh
This change reserves the window used for extended BIOS decoding as a fixed MMIO resource using read_resources callback in systemagent driver. This ensures that the resource allocator does not allocate from this window. Additionally, this window is also marked as fixed memory region in _CRS for PNP0C02 device. BUG=b:171534504 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I42b5a0ebda2627f72b825551c566cd22dbc5cca7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48184 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-12-08soc/intel/common/fast_spi: Add custom boot media deviceFurquan Shaikh
This change enables support for a custom boot media device in fast SPI controller driver if the platform supports additional decode window for mapping BIOS regions greater than 16MiB. Following new Kconfigs are added: 1. FAST_SPI_SUPPORTS_EXT_BIOS_WINDOW: SoC can select this to indicate support for extended BIOS window. 2. EXT_BIOS_WIN_BASE: If FAST_SPI_SUPPORTS_EXT_BIOS_WINDOW is selected, this provides the base address of the host space that is reserved for mapping the extended window. 3. EXT_BIOS_WIN_SIZE: If FAST_SPI_SUPPORTS_EXT_BIOS_WINDOW is selected, this provides the size of the host space reserved for mapping extended window. If platform indicates support for extended BIOS decode window, cbfstool add command is provided additional parameters for the decode window using --ext-win-base and --ext-win-size. It is the responsibility of the mainboard fmap author to ensure that the sections in the BIOS region do not cross 16MiB boundary as the host space windows are not contiguous. This change adds a build time check to ensure no sections in FMAP cross the 16MiB boundary. Even though the platform supports extended window, it depends upon the size of BIOS region (which in turn depends on SPI flash size) whether and how much of the additional window is utilized at runtime. This change also provides helper functions for rest of the coreboot components to query how much of the extended window is actually utilized. BUG=b:171534504 Change-Id: I1b564aed9809cf14b40a3b8e907622266fc782e2 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47659 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-12-08cbfs: Skip mcache in post-RAM stages before CBMEM is onlineJulius Werner
There have been a few issues with the new CBFS mcache code in stages after romstage, where the mcache resides in CBMEM. In a few special cases the stage may be doing a CBFS lookup before calling cbmem_initialize(). To avoid breaking those cases, this patch makes the CBFS code fall back to a lookup from flash if CBMEM hasn't been reinitialized yet in those stages. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: Icf6d1a1288cb243d0c4c893cc58251687e2873b0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48429 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-12-08cbmem: Make cbmem_online() accurate on stages after romstageJulius Werner
cbmem_online() always returns 1 in stages after romstage. However, CBMEM isn't actually immediately available in those stages -- instead, it will only become available when cbmem_initialize() is called. That usually happens very early in the stage, but there are still small amounts of code running beforehand, so it is useful to reflect this distinction. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I623c0606a4f49ea98c4c7559436bf32ebb83b456 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48428 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-12-08mb/google/volteer/variant/lindar: Add PMC.MUX.CONx device configuration and ↵Kevin Chang
disabling DDI port 1 and 2 HPD. This patch adds the PMC MUX and CONx devices for lindar. Device specific method contains the port and orientation details used to configure the mux. BUG=b:172533907 BRANCH=firmware-volteer-13521.B TEST=Built and booted into OS. Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com> Change-Id: Id5ee78b7ece8421144086af9b95f5f0d849be56c Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47434 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Zhuohao Lee <zhuohao@google.com> Reviewed-by: Caveh Jalali <caveh@chromium.org>
2020-12-08soc/intel/cannonlake: Restore alphabetical order of Kconfig selectsFelix Singer
Built clevo/l140cu with BUILD_TIMELESS=1, coreboot.rom remains identical. Change-Id: I5fa1e7216f3e80de0da5a58b84f221af321e4753 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48396 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-08mb/*: Remove SATA mode config for CNL based mainboardsFelix Singer
SATA_AHCI is already the default mode for CNL based mainboards. Therefore, remove its configuration from all related devicetrees. Built clevo/l140cu with BUILD_TIMELESS=1, coreboot.rom remains identical. Change-Id: I814e191243224a4b021cd7d4c1b611316f1fd1a4 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48391 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-12-08soc/intel/cannonlake: Align SATA mode names with soc/sklFelix Singer
Align the SATA mode names with soc/skl providing a consistent API. Built clevo/l140cu with BUILD_TIMELESS=1, coreboot.rom remains identical. Change-Id: I54b48462852d7fe0230dde0c272da3d12365d987 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48390 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-12-08mb/siemens/chili/base: Fix state of PCI devicesFelix Singer
The PCI devices P2SB and PMC are hidden by the FSP and cannot be unhidden, because the FSP locks their configuration. Thus, setting them to `on` is not correct. Therefore, set their state to hidden. Change-Id: Ib7c019cd7f389b2e487829e5550cc236ee5645b7 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48388 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-08mb/*: Remove SATA_AHCI config from SKL/KBL based devicetreesFelix Singer
SATA_AHCI is already the default mode for SKL/KBL based mainboards. Therefore, remove its configuration from all related devicetrees. Built clevo/n130wu with BUILD_TIMELESS=1, coreboot.rom remains identical. Change-Id: Ib5222c1b0314365b634f8585e8a97e0054127fe9 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48378 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-08soc/intel/skylake: Shorten SATA mode enum value namesFelix Singer
The Skylake FSP isn't used by coreboot anymore. Therefore, drop the misleading comment and the "KBLFSP" extension from the names of these enums. Also, drop the "MODE" extension to make their names shorter in general, since it doesn't add any more value. Built clevo/n130wu with BUILD_TIMELESS=1, coreboot.rom remains identical. Change-Id: If37d40e4e1dfd11e9315039acde7cafee0ac60f0 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48377 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-08soc/intel/skylake: Restore alphabetical order of Kconfig selectsFelix Singer
Built clevo/n130wu with BUILD_TIMELESS=1, coreboot.rom remains identical. Change-Id: I6a5c694a9686a5435aa5c64647286a6017f9aa13 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48376 Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-08mb/clevo/l140cu: Use lower-case hex valuesFelix Singer
Change-Id: I56a905980e5ae382c3488b9fddb9fab382efc1d6 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48375 Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-08mb/siemens/chili: Remove unnecessary device declarationsFelix Singer
Change-Id: I193aea7c92f340bd80a41a3777bcddc3f1339620 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48374 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-12-08mb/clevo/l140cu: Remove unnecessary device declarationsFelix Singer
Remove unnecessary device declarations and remove comments where SMBIOS slot descriptions are used. Change-Id: I3aa3f72de764889becdb0afeb2dac522385d70ef Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48373 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-08mb/clevo/l140cu: Use proper indentsFelix Singer
Use proper indents in the devicetree and align `end` keywords. Change-Id: Id6e6f4ad648a9bed35305b7a446744c6ed06a150 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48372 Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-08mb/clevo/l140cu: Make PCI devices P2SB and PMC hiddenFelix Singer
The PCI devices P2SB and PMC are hidden by the FSP. So instead turning them off, set their state to hidden being able to allocate ressources for them. Change-Id: Ie6e12f99b0a7ffb1c4831b3aa8705e911b677e88 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48371 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-08mb/google/volteer/var/voxel: Update DPTF parametersSheng-Liang Pan
remove TCC offset setting in overridetree.cb, use default setting(# TCC of 90) in baseboard. BUG=b:174547185 BRANCH=volteer TEST=emerge-volteer coreboot Signed-off-by: Pan Sheng-Liang <sheng-liang.pan@quanta.corp-partner.google.com> Change-Id: Iaac1fae12ccaa8a623bc2dc3105262918523d440 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48264 Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-08mb/google/volteer: Update I2C5 bus freq and devicetree.Stanley Wu
Update lindar gpio settings for Synaptics trackpad no function issue. Update I2C5 bus freq to 400kHz. Improve Goodix Touchscreen power on sequence. BUG=b:160013582 BRANCH=firmware-volteer-13521.B TEST=emerge-volteer coreboot and check system dmesg and evtest can get device. Verify trackpad function workable. Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com> Change-Id: I8c1ab6bab1f9de187e2a78ead7b5bbaf758f5fcf Reviewed-on: https://review.coreboot.org/c/coreboot/+/48150 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2020-12-08commonlib/region: Allow multiple windows for xlate_region_devFurquan Shaikh
This change updates the translated region device (xlate_region_dev) to support multiple translation windows from the 1st address space to 2nd address space. The address spaces described by the translation windows can be non-contiguous in both spaces. This is required so that newer x86 platforms can describe memory mapping of SPI flash into multiple decode windows in order to support greater than 16MiB of memory mapped space. Since the windows can be non-contiguous, it introduces new restrictions on the region device ops - any operation performed on the translated region device is limited to only 1 window at a time. This restriction is primarily because of the mmap operation. The caller expects that the memory mapped space is contiguous, however, that is not true anymore. Thus, even though the other operations (readat, writeat, eraseat) can be updated to translate into multiple operations one for each access device, all operations across multiple windows are prohibited for the sake of consistency. It is the responsibility of the platform to ensure that any section that is operated on using the translated region device does not span multiple windows in the fmap description. One additional difference in behavior is xlate_region_device does not perform any action in munmap call. This is because it does not keep track of the access device that was used to service the mmap request. Currently, xlate_region_device is used only by memory mapped boot media on the backend. So, not doing unmap is fine. If this needs to be changed in the future, xlate_region_device will have to accept a pre-allocated space from the caller to keep track of all mapping requests. BUG=b:171534504 Change-Id: Id5b21ffca2c8d6a9dfc37a878429aed4a8301651 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47658 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-08mb/google/volteer: ACPI nodes for volteer2_ti50Jes Klinke
Unique among the Volteer devices, the volteer2_ti50 variant connects to the TPM via I2C. This CL introduces the proper devicestree declarations for the Linux kernel to recognize that. overridetree.cb is shared between "sub"-variants volteer2 and volteer2_ti50, so both will have two TPM nodes, the I2C being disabled by default. The odd _ti50 variant then has code in variant.c to enable the I2C node and disable the SPI node. BUG=b:173461736 TEST=abuild -t GOOGLE_VOLTEER2{_TI50,} -c max -x Change-Id: I5576a595bbabc34c62b768f8b3439e35ff6bcf7b Signed-off-by: Jes Bodi Klinke <jbk@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48223 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-08mb/google/volteer/variants: Update Power Limit2 minimum valueSumeet R Pawnikar
Update Power Limit2 (PL2) minimum value to the same as maximum value for volteer variants like baseboard, delbin, eldrid, terrador and todor. All other variants uses the DTT entries from baseboard devicetree since there is no override present for those variants. DTT does not throttle PL2, so this minimum value change here does not impact any existing behavior on the system. BUG=None BRANCH=volteer TEST=Build and test on volteer system Change-Id: I568e87c87ef517e96eaab3ff144b1674d26ae1e6 Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48292 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-12-08soc/intel/common/gpio_defs: Add PAD_TRIG(OFF) in PAD_CFG_GPI_GPIO_DRIVERKaiyen Chang
Probabilistic interrupt storm is observed while kernel is configuring the GPIO for SD card CD pin. The root cause is that the macro PAD_CFG_GPI_GPIO_DRIVER isn't configuring trigger as PAD_TRIG(OFF). The way GPIO interrupts are handled is: 1. Pad is configured as input in coreboot. 2. Pad IRQ information is passed in ACPI tables to kernel. 3. Kernel configures the required pad trigger. Therefore, PAD_TRIG(OFF) should be added in PAD_CFG_GPI_GPIO_DRIVER to turn off the trigger while pad is configured as input in coreboot and then let kernel to configure the required pad trigger. BUG=b:174336541 TEST=Run 1500 reboot iterations successfully without any interrupts storm. Signed-off-by: Kaiyen Chang <kaiyen.chang@intel.corp-partner.google.com> Change-Id: Icc805f5cfe45e5cc991fb0561f669907ac454a03 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48302 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2020-12-08drivers/i2c/tpm: Unconditionally allow I2C TPM ACPI nodeJes Klinke
DRIVER_I2C_TPM_ACPI is used to enable the "driver" needed for coreboot to present a TPM node in the devicetree. It would usually only do so, if coreboot itself is communicating with the TPM via I2C (I2C_TPM). However, technically, there is no dependency. In order to not show the ACPI option in menuconfig if the board is not using I2C, a dependency was declared in Kconfig. However, the same can be achieved without making it an error to manually declare DRIVER_I2C_TPM_ACPI without I2C_TPM. For Volteer, we have just such a need, since it has two "sub-variants" sharing the same overridetree.cb, one having SPI TPM and another having I2C TPM. The former will have a disabled ACPI node representing the I2C TPM, while its Kconfig is such that coreboot itself does not have I2C TPM support. In order to export even a disabled ACPI node representing the I2C connected TPM, coreboot needs DRIVER_I2C_TPM_ACPI. Hence, that will have to be enabled in a case where coreboot does not have I2C_TPM (for one of the two sub-variants, namely volteer2). BUG=b:173461736 TEST=Tested as part of next CL in chain Change-Id: I9717f6b68afd90fbc294fbbd2a5b8d0c6ee9ae55 Signed-off-by: Jes Bodi Klinke <jbk@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48222 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-08soc/intel/common/usb4: Add ADL-P DMA0/1 ID into USB4 common codeSubrata Banik
Change-Id: Id014828d282350bcb1f4de295d5cfb72b6950634 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48393 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: V Sowmya <v.sowmya@intel.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-12-08soc/intel/common/block/cpu/car: Fix two whitespace issuesSubrata Banik
This patch removes 1 unnecessary whitespace and add 1 whitespace into IA common car code block. Change-Id: I3690b5f219f5326cfca7956f21132062aa89648e Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48381 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-12-07nb/intel/ironlake: Introduce memmap.hAngel Pons
Move all memory map definitions into a separate header. Tested with BUILD_TIMELESS=1, Packard Bell MS2290 remains identical. Change-Id: I1f37ad9cae39041f98871c613b308b5ac5da01b3 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45379 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-07nb/intel/ironlake: Drop casts from DEFAULT_{MCHBAR,DMIBAR}Angel Pons
There's no need to wrap these macros with casts. Removing them allows dropping more casts in `early_init.c`. To avoid binary changes the casts are put into the {MCH,DMI,EP}BAR{8,16,32} macros instead where they are needed to reach the right memory locations. Change-Id: Icff7919f7321a08338db2f0a765ebd605fd00ae2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45378 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-07nb/intel/i945: Introduce memmap.hPatrick Georgi
Inspired by Idca25b2e4bf65abcb and Ib275f9ad8ca9ff move all memory map definitions into a header with a common name. Change-Id: I32a99f70f4d2eb52367c9edfc0aa6d5da2fec03f Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48234 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-12-07soc/intel/skl: set PEG port state to autoMichael Niewöhner
Setting PegXEnable to 1, statically enables the PEG ports, which blocks the SoC from going to deeper PC states. Instead, set the state to "auto" (2), so the port gets disabled, when no device was detected. Note: Currently, this only works with the AST PCI bridge disabled or the VGA jumper set to disabled on coreboot, while it works on vendor in any case. The reason for this is still unclear. Test: powertop on X11SSM-F shows SoC in PC8 like on vendor firmware instead of just PC3 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: I3933a219b77d7234af273217df031cf627b4071f Reviewed-on: https://review.coreboot.org/c/coreboot/+/48304 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-12-07sb/intel/common: Modify CONFIG_LOCK_MANAGEMENT_ENGINE behaviorSridhar Siricilla
The patch modifies KConfig behaviour if CSE Lite SKU is integrated into the coreboot. When the CSE Lite SKU is integrated, the KConfig prevents writing to ME region but keeps read access enabled. Since CSE Lite driver checks the signature of RW partition to identify the interrupted CSE firmware update, so host must have read access to the ME region. Also, the patch modifies the KConfig's help text to reflect the change. When CSE Lite SKU is integrated, master access permissions: FLMSTR1: 0x002007ff (Host CPU/BIOS) EC Region Write Access: disabled Platform Data Region Write Access: disabled GbE Region Write Access: disabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: enabled Flash Descriptor Write Access: disabled EC Region Read Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: disabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: enabled Flash Descriptor Read Access: enabled BUG=b:174118018 TEST=Built and verified the access permissions. Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I2f6677ab7b59ddce827d3fcaae61508a30dc1b28 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48267 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
2020-12-07mb/google/volteer/var/elemi: use devtree aliases for PMC MUX connectorsWisley Chen
refer to cb:45878 Now that soc_get_pmc_mux_device() is gone, the PMC MUX connector devices can be hooked up together via devicetree aliases. BUG=b:174735512 BRANCH=volteer TEST=build and type-c display work Change-Id: I0bf84e2691856c9760d8fa9b6d853b04be10390a Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48268 Reviewed-by: YH Lin <yueherngl@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-07common/block/cse: Rename cbfs_boot_load_file() to cbfs_load()V Sowmya
This patch renames the cbfs_boot_load_file() to cbfs_load() to avoid the build errors for cselite and align with the new changes to API https://review.coreboot.org/c/coreboot/+/39304 . Change-Id: I717f0a3291f781cc3cf60aae88e7479762ede9f9 Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48291 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-07vc/intel/fsp/fsp2_0/cooperlake_sp: Update WW47 FSP Memory map HOBJohnny Lin
Tested=On OCP Delta Lake, verify the memory map hob data are correct. Change-Id: I7bb2e9f41daa4cbce49169535eadf7f0d4972716 Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48228 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Zhang <jonzhang@fb.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-12-07mb/intel/adlrvp: Remove GPP_E0Meera Ravindranath
Remove the unused UART_BT_WAKE GPIO as BT is over USB. Change-Id: I638b4528fa5c4c378a1e8ff7bb88546da1513df2 Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48240 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2020-12-06soc/amd/picasso: drop unused cpu/amd/mtrr from MakefileFelix Held
TEST=Timeless build of mb/amd/mandolin results in identical image. Change-Id: Ib1337f64ea7057cf04ca92bdef66e35cc350625d Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48365 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-12-06soc/amd/cezanne: add config.c and minimal chip.hFelix Held
Change-Id: I89f08c201bd7d9a11b186ef960abe9714a76fb97 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48317 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-12-06soc/amd/picasso/config: add comment about cfg never being NULLFelix Held
Change-Id: I39cf2d28749536cb7d9462fa4af412850677f2e3 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48354 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-12-06soc/amd/picasso: remove config_t typedefFelix Held
Change-Id: Idc0061e7b88134ab17cb65429133cffd16ca5651 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48316 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-12-06soc/amd/picasso/chip.h: remove unneeded extern pci_domain_opsFelix Held
Now pci_domain_ops in chip.c can also be marked as static. Change-Id: Ia92b778a5882d991b391dc29aeee0a5615677913 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48315 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-06soc/amd/stoneyridge: remove unused config_t typedefFelix Held
Change-Id: I1456fe069c4b0cf859f769e0144ec62cff0f3987 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48319 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-12-06soc/amd/stoneyridge/chip.h: remove unneeded extern pci_domain_opsFelix Held
Now pci_domain_ops in chip.c can also be marked as static. Change-Id: I5e481fe311c9db4aacfd94bbf671edf679528946 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48318 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-12-06soc/amd/stoneyridge/acpi/sb_fch: use existing base address definesFelix Held
TEST=Identical timeless build for amd/gardenia. Change-Id: I04952cdbbe7893f35a674a156a9bc22202fbdc2f Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48311 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-06include/device/device: add comment that config_of_soc never returns NULLFelix Held
Since config_of() calls die() if dev or dev->chip_info are NULL, config_of_soc() will either return a non-NULL pointer or won't return. Change-Id: I6de6bb1610e823af215436c94ff1a78ff6b86b78 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48359 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2020-12-06soc/amd/picasso/Makefile: use all-y for adding config.c to the buildFelix Held
Since config.c also gets linked into verstage on PSP and not only into the stages running on the x86 cores, use all-y instead of adding config.c to all classes separately. Change-Id: Icacb13e73e80e6f3d8c2141784702fb895daf7db Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48313 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-12-06soc/amd/cezanne: use common TSC and monotonic timer codeFelix Held
Change-Id: I9bc82f1e64f2cf21bfa4bf1ac75d17247208686c Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48306 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-06soc/amd: factor out common family 17h&19h TSC and monotonic timer codeFelix Held
The corresponding MSRs of all AMD family 17h and 19h CPUs/APUs match the code. Change-Id: I29cfef5d8920c29e36c55fc46a90eb579a042b64 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48305 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-12-06soc/amd/common/block/cpu: move Makefile guards into subfoldersFelix Held
The next patch will add a tsc subfolder that might end up containing code that is guarded with different Kconfig options, so move the guards into the Makefiles in the subfolders instead of guarding the inclusion of the Makefiles in the subdirectories with the corresponding Kconfig option. Change-Id: Iafc867eb9adcb23e9a4878cc381684db6f9692d5 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48312 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-12-06mb/*: Remove unnecessary selectsFelix Singer
Remove SOC_INTEL_COMMON_BLOCK_HDA from mainboards Kconfig since it is selected by their SoC soc/intel/cannonlake. Change-Id: I9597746a217575b42f6325998b948e16b452231a Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48289 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-06mb/siemens/chili: Move mainboard/gpio.h to variant/gpio.hFelix Singer
Move mainboard/gpio.h to variant/gpio.h and rename its methods to make clear that these methods are implemented on variant level. Change-Id: Ib4e7ec948ca4d019ad82ebc5abe39fc408281cf4 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48299 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-06mb/clevo/kbl-u: Add a seperate method for early GPIOsFelix Singer
Add variant_configure_early_gpios() configuring early GPIOs to make the difference clear. Change-Id: I6e7c8c32963c9eeab4399947dac511442987cb45 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48298 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-06mb/clevo/kbl-u: Move mainboard/gpio.h to variant/gpio.hFelix Singer
Move mainboard/gpio.h to variant/gpio.h and rename its methods to make clear that these methods are implemented on variant level. Change-Id: Ibcb6322067285984bad70761fce34cfcb6ed8e0f Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48297 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-06mb/clevo/cml-u: Move mainboard/gpio.h to variant/gpio.hFelix Singer
Move mainboard/gpio.h to variant/gpio.h and rename its methods to make clear that these methods are implemented on variant level. Change-Id: I1ae9b54ed683000f65323b11747ce3280a1c7f2a Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48296 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-05soc/amd/stoneyridge: order selected Kconfig options alphabeticallyFelix Held
TEST=Timeless build doesn't change for amd/gardenia. Change-Id: I5f1873111c07f6dc823b06654e463830d83acc9e Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48308 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-12-05soc/amd: Fix X86_RESET_VECTOR location in commentsKyösti Mälkki
Change-Id: I3e4b3cbed8abe3988d9f48c13d01400af75a4776 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48307 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-05amd_blobs: Always set default pathsNico Huber
Don't make the default paths to AMD blobs depend on USE_AMD_BLOBS. This way we get error messages about the missing files when the blobs repos aren't checked out. Change-Id: I754fdc5e1414c8a3dc88b364bcfbea9a26b59eb0 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38044 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-12-05mb/prodrive/hermes: Generalise `check_signature` functionAngel Pons
Allow to specify which signature is to be checked. Change-Id: Ica874b1c4283fdb8dbd702c34ccb3315a2cf160d Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48147 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-12-05mb/google/dedede: Create storo variantTao Xia
Create the storo variant of the waddledee reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.3.1). BUG=b:174284884 BRANCH=None TEST=util/abuild/abuild -p none -t google/dedede -x -a make sure the build includes GOOGLE_STORO Signed-off-by: Tao Xia <xiatao5@huaqin.corp-partner.google.com> Change-Id: I5ad41e0b2bc95b44733a2ad3c543267f3f56f9e7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48227 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Xuxin Xiong <xuxinxiong@huaqin.corp-partner.google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2020-12-05soc/amd/picasso/tsc: fix clock divisor range checkFelix Held
The CPU core clock divisor ID needs to be in the range from 8 to 0x30 including both numbers. TEST=Compared with Picasso's PPR #55570 Change-Id: Ie5ee342d22294044a68d2f4b2484c50f9e345196 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48287 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-12-05mb/amd/majolica: add functionality to add EC blob to buildFelix Held
Without the EC blob being present in the SPI flash, the board won't even power up. Change-Id: Ia3c50e86414bbc707bc33e28c636196c1be2f1e6 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48250 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-12-05mb/amd/majolica: add skeleton of Cezanne reference boardFelix Held
This is an adapted copy of mainboard/example/min86 that is currently only used for Jenkins to test the SoC code in soc/amd/cezanne and isn't expected to reach boot block at the moment. It will be extended in future follow-up commits. Change-Id: I6806955952fbfa3227294cfc44fdf9156140e933 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48238 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-12-05soc/amd/cezanne: add skeleton for new SoCFelix Held
This is based on the minimal example code in soc/example/min86 and was adapted to use the AMD non-CAR boot block and the common AMD PCI MMCONF support. In its current state this won't even reach the boot block, but will pass the build bot. The missing parts for that will be added in future patches. This is an attempt to not go the usual route to create a copy of a previous SoC generation and the make changes to the code to work for the new SoC, but to start from a nearly empty directory and then add the actual code stage by stage and component by component. Change-Id: I70aeb9ae010e943abfa667a0ea95c6fa9f15b7f5 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48237 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-12-05mb/google/volteer/var/voema: Add MIPI camera supportDavid Wu
1. Add VARIANT_HAS_MIPI_CAMERA to Kconfig.name 2. Add mipi_camera.asl BUG=b:169356808,b:169551066 TEST=FW_NAME=voema emerge-volteer coreboot chromeos-bootimage Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I63d133246dbdc6aff7bf97d98f95052edf53bac9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47668 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-05mb/google/puff/var/dooly: Update DPTF parametersTony Huang
DPTF paramerters form thermal team. Set PL1 Min/Max 15/25W, PL2 Min/Max 40/49W. BUG=b:174514010 BRANCH=puff TEST=build image and verified by thermal team. Change-Id: I9e6c4bae181e87f87f2e92337bb9d989f5b7d955 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48206 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sam McNally <sammc@google.com> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2020-12-05mb/google/zork: set APU_EDP_BL_DISABLE to low as defaultChris Wang
set APU_EDP_BL_DISABLE(GPIO_85) to low to avoid the VARY_BL fast than APU_DP_BLON. BUG=b:171954512 BRANCH=zork TEST=validate the panel sequence with scope. Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com> Change-Id: Ia6d3f4335583bb2d91a6bce96d89cff84247d0ad Reviewed-on: https://review.coreboot.org/c/coreboot/+/48203 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org>
2020-12-05mb/google/volteer: Create copano variantFrankChu
Create the copano variant of the volteer reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.3.1). BUG=b:174413884 BRANCH=None TEST=util/abuild/abuild -p none -t google/volteer -x -a make sure the build includes GOOGLE_COPANO Signed-off-by: FrankChu <frank_chu@pegatron.corp-partner.google.com> Change-Id: Ib06625f492f68a6a6f5c6b382772b68f1eb681ef Reviewed-on: https://review.coreboot.org/c/coreboot/+/48136 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Zhuohao Lee <zhuohao@chromium.org>
2020-12-05drivers/intel/fsp2_0/memory_init: Wrap calls into FSPPatrick Rudolph
Use a wrapper code that does nothing on x86_32, but drops to protected mode to call into FSP when running on x86_64. Tested on Intel Skylake when running in long mode. Successfully run the FSP-M which is compiled for x86_32 and then continued booting in long mode. Change-Id: I9fb37019fb0d04f74d00733ce2e365f484d97d66 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48202 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-05cpu/x86/64bit: Add code to call function in protected modePatrick Rudolph
This adds a helper function for long mode to call some code in protected mode and return back to long mode. The primary use case is to run binaries that have been compiled for protected mode, like the FSP or MRC binaries. Tested on Intel Skylake. The FSP-M runs and returns without error while coreboot runs in long mode. Change-Id: I22af2d224b546c0be9e7295330b4b6602df106d6 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48175 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-12-05mb/google/volteer/variant/lindar: Correct SD card reader power sequenceKevin Chang
According to the spec provided by Bayhub, the 3.3V power rail must be enabled at least 100ms before reset is released. To ensure this, set the power enable signal in the bootblock GPIO table. BUG=b:173676531 BRANCH=firmware-volteer-13521.B TEST=Built and booted into OS, test USB function normally. Change-Id: I0c536f36c138ace93766f3024f6ec5d47b38269f Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47799 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-05mb/google/zork: Replace generic driver with sx9324 driverEric Lai
Use a new driver for the SX9324 proximity detector device. This is first draft settings, will modify it after fine tuning. BUG=b:172397658 BRANCH=zork TEST=run "i2cdump -y -f 0 0x28" and checked all registers are expected. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I869d0b6640247099ca489e96ed94e03811a04bf4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47867 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Kangheui Won <khwon@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-05drivers/i2c/sx9324: Add more registers and reorderEric Lai
Export all registers that driver is looking for. And put in alphabetic order. The missing registers for kernel v5.4 sx93xx are: reg_irq_msk reg_irq_cfg0 reg_irq_cfg2 reg_afe_ph0/1/2/3 BUG=b:172397658 BRANCH=zork TEST=Build passed Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Ic9d7a959b1769b6846bba302e3aeab9a3a1cedac Reviewed-on: https://review.coreboot.org/c/coreboot/+/47866 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-05mb/google/zork/var/vliboz: Add LTE_RST power sequenceEric Lai
Latest HW schematic add LTE_RST pin to control module power sequence. BUG=b:173490220 BRANCH=zork TEST=measure the waveform is meet the LTE module spec. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I0f0a35a905d711dd8d17dea2ae82a8dfa1fa05ed Reviewed-on: https://review.coreboot.org/c/coreboot/+/47912 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-12-05mb/google/dedede/var/drawcia: Configure Acoustic noise mitigation UPDsMaulik V Vaghela
Enable Acoustic noise mitigation for drawcia and set slew rate to 1/4 which is calibrated value for the board. Other values like PreWake, Rampup and RampDown are 0 by default. BUG=b:162192346 BRANCH=dedede TEST=Correct value is passed to UPD and Acoustic noise test passes. Change-Id: Iadcf332d59dac2ba191b82742a18a1ab326940d1 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48231 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-12-05soc/intel/jasperlake: Add Acoustic noise mitigation configurationMaulik V Vaghela
This patch exposes acoustic noise mitigation related UPDs/configuration to be filled from devicetree. For each variant, we might have different values for various parameters. Filling it from devicetree will allow us to fill separate values for each board/variant. Note that since JasperLake only has one VR, we're only filling index 0 for slew rate and FastPkgCRampDisable. BUG=b:162192346 BRANCH=dedede TEST=code compilation is successful and values from devicetree are getting reflected in UPDs Change-Id: Id022f32acc3fd3fe62f78e3053bacdeb33727c02 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47879 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-12-05soc/intel/xeon_sp: Don't use common block acpi.hMarc Jones
Don't use the common block acpi.h when we aren't using the COMMON_ACPI config. Fixes a dependency build issue in an upcoming commit. Change-Id: I3b80f7bbdf81e594fdde5b750c666edd8ca7268d Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48254 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com> Reviewed-by: Jonathan Zhang <jonzhang@fb.com>