Age | Commit message (Collapse) | Author |
|
Get Hardware Security Processor(HSP) state in PSP Verstage through the
SVC call and report it in cbmem logs.
BUG=b:198711349
TEST=Build Skyrim BIOS image and boot to OS in Skyrim.
Change-Id: Ic4875d1732f22783a90434329188192b106168f4
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71208
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Add an SVC call to get the state of Hardware Security Processor (HSP) in
AMD SoCs. This SVC call will be used from PSP verstage to get and
report HSP state.
BUG=b:198711349
TEST=Build Skyrim BIOS image and boot to OS. Ensure that the HSP state
is read and reported in the firmware logs.
Change-Id: I7fe3363d308a80cc09e6bdadd8d0bb1d67f7d2bf
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71207
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Remove TODO comment after checking against Mendocino PPR #57243, rev
3.02.
BUG=b:263563246
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie0e35f4c68ec09304eb892888759c7e5ef3dd0ca
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71911
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update USB port Type-A Port A0 setting.
BUG=b:261650602
TEST=emerge-skyrim coreboot. Ensure that USB-A port is enumerated correctly in the output of lusub command.
Change-Id: I9563f7b141c34b613cf896f1ce92178617a62c93
Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71854
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
|
|
Follow hardware design to correct aux setting on USB-C ports to
fix DP monitor can not output data through type-C port 0
USB-C port 0 did not have retimer.
USB-C port 1 have retimer.
USB-C port 0 AUX_DC_P connect to GPP_E22.
USB-C port 0 AUX_DC_N connect to GPP_E23.
BUG=b:263212450
BRANCH=firmware-brya-14505.B
TEST=emerge-brya coreboot chromeos-bootimage
DP monitor display normally
Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com>
Change-Id: I3af7522f7b6477edcd88004ce1d5f86aeebe3393
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71222
Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Update settings for touchpad I2C frequency and data hold time.
I2C frequency and data hold time need to meet touchpad spec.
- I2C frequency: 380kHz - 400kHz
- Data hold time: 0.3us - 0.9us
BUG=b:262320419
TEST=On winterhold, touchpad i2c measurement from vendor,
Frequencies: 395 kHz, Data hold time: 0.66 us
Change-Id: I40fa6f9e88656d4ec02a4120f75a2a9413b5abaa
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71853
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Exposing the GPIOs via an ACPI PowerResource and the _CRS results in the
OS driver and ACPI thinking they own the GPIO. This can cause timing
problems because it's not clear which system should be controlling the
GPIO.
There's no reason to require explicit disablement however, so drop the
superfluous 'disable' flag, and change the _CRS generation to check if
the GPIOs will be exported via the 'has_power_resource' flag instead.
This mirrors the change made for drivers/i2c/generic.
TEST=untested, as no boards selected this option.
Change-Id: Icb60502a4a7c5e7a1fcf1ee60e23c77e00d6de7b
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71851
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Exposing the GPIOs via an ACPI PowerResource and the _CRS results in the
OS driver and ACPI thinking they own the GPIO. This can cause timing
problems because it's not clear which system should be controlling the
GPIO.
There's no reason to require explicit disablement however, so drop the
superfluous 'disable' flag, and change the _CRS generation to check if
the GPIOs will be exported via the 'has_power_resource' flag instead.
This mirrors the change made for drivers/i2c/generic.
TEST=untested, as no boards selected this option.
Change-Id: I4f95d0e453d89b7e1978d3efac304518304495d1
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71850
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Exposing the GPIOs via an ACPI PowerResource and the _CRS results in the
OS driver and ACPI thinking they own the GPIO. This can cause timing
problems because it's not clear which system should be controlling the
GPIO.
Previously, we flagged as an error any device which set the
'has_power_resource' flag but did not set 'disable_gpio_export_in_crs.'
There's no reason to require explicit disablement however, so drop the
superfluous 'disable' flag, and change the _CRS generation to check if
the GPIOs will be exported via the 'has_power_resource' flag instead.
BUG=b:265055477
TEST=build/boot skyrim, dump SSDT and verify touchscreen GPIOs only
listed under PRx, not under _CRS.
Change-Id: I837ae6c6fe4b8e1c4e10686406cba06bdb7759d2
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71849
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
The patch uses 'enum cb_error' values as return values for below
functions:
1. cse_get_rw_rdev()
2. cse_erase_rw_region()
3. cse_write_rw_region()
4. cse_locate_area_as_rdev_rw()
5. cse_get_target_rdev()
6. cse_copy_rw
TEST=Build, boot and perform CSE downgrade test on the Gimble board
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I9c664430a5015d37b9c329f85886f8622deaa497
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71825
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
The patch uses cb_err enum values as return values for function
cse_get_boot_performance_data() instead of true/false.
TEST=Build code for Gimble
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I0153d5496c96fb0c2a576eef1fe2fa7fa0db8415
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71824
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
The patch uses cb_err enum values as return values for below functions:
1. cse_hmrfpo_enable()
2. cse_boot_to_ro()
3. cse_prep_for_rw_update()
4. cse_sub_part_get_target_rdev()
5. cse_get_sub_part_fw_version()
6. cse_prep_for_component_update()
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I1bdb7d6b2051a69f1021673d464bfad63dd39431
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71823
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Fix:
cc1: error: src/drivers/intel/i210: No such file or directory [-Werror=missing-include-dirs]
Change-Id: I94b0f99353ed3a582ea590cbc6b12dec6294c75d
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70468
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
When pulling in commonlib/storage/pci_sdhci.c into herobrine, am
seeing an "error: cast to pointer from integer of different size
[-Werror=int-to-pointer-cast]", so fixing that.
BUG=b:254092907
BRANCH=None
TEST=emerge-herobrine coreboot
Make sure that we can build without errors
Change-Id: Ib1718f156708a619f7eeb181e19b1a8c620de1f8
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71828
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
The headers added are generated as per FSP v3503.00
BUG=b:261159242
BRANCH=firmware-brya-14505.B
TEST=Boot to OS
Cq-Depend: chrome-internal:5318308, chrome-internal:5318129
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Change-Id: I050c0f81dce1cfc5ef64406e75d9823352564836
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71758
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
|
|
0xF8000000 was taken from old platform during phoenix porting, updating
it to 0xE0000000 to make room for 256 pci busses which is required for
usb4 and hotplug support. mmconf size gets set to 0x10000000 when 256
busses are used.
Change-Id: Ic143171f5650aff5db48c8f477d7aca3e7f5c1e7
Signed-off-by: Ritul Guru <ritul.bits@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71870
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I62b15d59cc4a5f214e45c3995f651228b1ae6ea7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71900
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie7ded68f4732ec12a1c7e59445d572763a03c3b9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71879
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ief1e9c6d6fa0889b947863837bedb2fbdf3120c3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71878
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I4b9f1b71a5f8b2776c8b338351b2cca723d00598
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71877
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iedd99cfb64809c4e111e0931c2260981f465035b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71876
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
The smu_sx_entry function is identical for all AMD SoCs, so introduce it
as common code that can be selected to be included in the build via the
SOC_AMD_COMMON_BLOCK_SMU_SX_ENTRY Kconfig option. The only SoC-specific
difference in this function is the ID of the SMC_MSG_S3ENTRY message
which is defined in each SoC's soc/smu.h include file.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Suggested-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: I49758e9333a351d8e50e8f1b53a7f00fbe89866c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71875
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Morthal has been overcome by events.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ice46f4c7400772dbf51eb9d20b61af277daa8513
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71880
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Use the common preloader for fsp-s
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I32f8ca02c4de9e882f207c2dd2378b6b44dc61ff
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71848
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use the common preloader for fsp-s
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: Iea7011d37667f3f04ce842038346741fba66b1dc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71847
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
If a discoverable device (e.g. a PCI device) does not appear in the
devicetree (typically because it is removable), coreboot enables it
by default. Disable the SATA2 (device for SATA ports 4 and 5, which
is not used in AHCI mode) and Thermal devices on W520 as well. Both
devices were only disabled on the T520.
Tested, this change fixes a long boot time when using MrChromebox's
edk2 payload on the W520, likely related to the following errors:
AHCI: Error interrupt reported PxIS: 40000001
Non data transfer failed at retry 0
AHCI: Error interrupt reported PxIS: 40000001
Non data transfer failed at retry 1
AHCI: Error interrupt reported PxIS: 40000001
Non data transfer failed at retry 2
AHCI: Error interrupt reported PxIS: 40000001
Non data transfer failed at retry 3
AHCI: Error interrupt reported PxIS: 40000001
Non data transfer failed at retry 4
Change-Id: I0b0483aae05fa84d97987a93db634b740f830e18
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71857
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
As per Kendo3-WS schematics, the conventional PCI bridge is not used.
Change-Id: Ic3aa11cc3a3028c31b06ad8f74875db8c5626a89
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71856
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
<gpio.h> chain-include <soc/gpio.h>.
Change-Id: Ia57d5cd33c70b6a755babd4db56c64c0e3666f9f
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71817
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
<gpio.h> chain-include <soc/gpio.h>.
Change-Id: If2af7f77e2d910a3f3470d15dbfc98775a2633b6
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71813
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
Fix:
cc1: error: src/vendorcode/siemens/hwilib: No such file or directory [-Werror=missing-include-dirs]
Change-Id: I0e805ead90dddbee3ba3577d119e465f669231ba
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70469
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Change-Id: I435837381a966b61081d023447a6e7fdfd9a9348
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71553
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Tested with the following drives:
- Crucial P5 Plus (CT500P5PSSD8)
- Kingston KC3000 (SKC3000S/512G)
- Sabrent Rocket NVMe 4.0 (SB-ROCKET-NVMEe4-500)
- Samsung 970 EVO (MZ-V7E250)
- Samsung 970 EVO Plus (MZ-V7S250)
- Samsung 980 PRO (MZ-V8P2T0)
- WD Black SN850X (WDS100T2XD0E)
- WD Blue SN580 (WDS500G2B0C)
- WD Green SN350 (WDS240G2G0C)
Test:
- Drive is functional and has no unrecoverable errors on boot
- Drive is functional and has no unrecoverable errors after S0ix
Change-Id: I51492c97c48f760d4aa9e4a2b2e57b0f1a06d090
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71662
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
|
|
Tested with the following drives:
- Crucial P5 Plus (CT500P5PSSD8)
- Kingston KC3000 (SKC3000S/512G)
- Sabrent Rocket NVMe 4.0 (SB-ROCKET-NVMEe4-500)
- Samsung 970 EVO (MZ-V7E250)
- Samsung 970 EVO Plus (MZ-V7S250)
- Samsung 980 PRO (MZ-V8P2T0)
- WD Black SN850X (WDS100T2XD0E)
- WD Blue SN580 (WDS500G2B0C)
- WD Green SN350 (WDS240G2G0C)
Test:
- System still asserts `SLP_S0#` during suspend (power LED blinks)
- `slp_s0_residency_usec` still increases after suspend
Change-Id: I919d75cb2a88c0d623c46e44c506ec2d85567995
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71661
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
|
|
"extern" is always implied with function declarations.
Also remove the comment as the linker will just tell you the same if a
definition is missing.
Change-Id: I53679ab57981790f82affb46a006281b348af574
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71869
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
The DDR5 board is almost identical to the DDR4 one. The only major
difference is the board's DDR5 memory design.
TEST=Boot MSI PRO Z690-A board successfully to Ubuntu 22.04. Memory:
Crucial CT8G48C40U5.M4A1 in all 4 slots.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I652a879d1616df4708fe4690797ad98384897f53
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68448
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
|
|
This avoids runtime failures of lacking a RW_NVRAM section in fmap or
one having a size too small.
Change-Id: I3415bd719428a23b21210eb2176dbe15fa44eb9c
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71868
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Use 'enum cb_err' values for below cse lite functions instead of true or
false.
Functions whose return values updated in this patch:
1. cse_set_next_boot_partition()
2. cse_data_clear_request()
3. cse_set_and_boot_from_next_bp()
4. cse_boot_to_rw()
5. cse_fix_data_failure_err()
TEST= Do boot test on Gimble.
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I7fec530aeb617bab87304aae85ed248e51a6966b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71822
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
The patch uses 'enum cb_err' values as return values for
cse_get_bp_info() function.
TEST=Build the code for Gimble
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I900e40b699de344f497e61d974bca3fee7f6ecbf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71821
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Configure GPIOs based from EE.
BUG=b:263060849
BRANCH=None
TEST=FW_NAME=omnigul emerge-brya coreboot
Change-Id: I5cfaa8fce6df7f09b744fb3e0b7b1d5b6acdc79b
Signed-off-by: jamie_chen <jamie_chen@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71706
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
|
|
Use the common preloader for fsp-s
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I74ef10347c37c8371156f89da9f234d170ab1aa6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71846
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Use the common preloader for fsp-s
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: Ibbed17445c3cd8fa4da671f2a90532d3c39ad08b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71845
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
The function to start preloading the fsp-s is identical in cezanne and
newer socs, so move it to common with a new Kconfig option to enable it.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: Ia572c99928f4a60896b7a861ab6fb3f1257ac1cc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71844
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I2dd17774b79c5adb64c2575ac55dec476c434842
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71843
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Remove TODO comment after reviewing against mendocino ppr #57243, rev
3.00
BUG=b:263563246
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: Id517ce6e5f5bee5deffe509d748b16be0eefca96
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71842
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
|
|
This header file is correct for Mendocino, so remove the TODO.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I85b47491863bff731b86cf0523253cb547dbb76a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71794
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
mtk_init_mcu() function already returns enum cb_err.
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: I562bfbdc5c917a17ce1aa656046b69eb56dce48c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68241
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
The patch updates return type for below functions as they uses
'enum csme_failure_reason' type return values.
1. cse_sub_part_trigger_update()
2. handle_cse_sub_part_fw_update_rv()
3. cse_sub_part_fw_update()
TEST=Build coreboot code for Gimble
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I43bc2d518a275894860e4d3c930c3c4d9685fb3a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71792
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Krishna P Bhat D <krishna.p.bhat.d@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Fix:
cc1: error: 3rdparty/blobs/mainboard/asrock/h110m: No such file or directory [-Werror=missing-include-dirs]
cc1: error: 3rdparty/blobs/mainboard/acer/aspire_vn7_572g: No such file or directory [-Werror=missing-include-dirs]
...
Change-Id: Icc43e40514a12944fa180197ffe3230ff9800de9
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71585
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Found using 'Wmissing-include-dirs' command option.
Change-Id: I420b60341dfd0119b14e8492722af62e49fceff8
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71554
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Fix:
cc1: error: ../../src/vendorcode/eltan/security/include: No such file or directory [-Werror=missing-include-dirs]
Change-Id: I806b106c641d0d93ed18c87cf6d863c1cce04b03
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71298
Reviewed-by: Erik van den Bogaert <ebogaert@eltan.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Fix:
cc1: error: src/mainboard/intel/jasperlake_rvp/variants/jslrvp/include: No such file or directory [-Werror=missing-include-dirs]
Change-Id: I5fee0053ab0281b713c33dbc5862c1d4587e854e
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71257
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Fix:
cc1: error: src/mainboard/intel/elkhartlake_crb/variants/ehlcrb/include: No such file or directory [-Werror=missing-include-dirs]
Change-Id: I1c6f6d99cfb3bc08966d662282c023e22e111f90
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71256
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Change-Id: Iba5b39c6189d3224ba209c7985153701fe8896fb
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65692
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Change-Id: Ibff33c08a1d583b19b205a66d5a4267df65ced75
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64940
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Update devicetree based on the schematic_20230105.
BUG=b:263534907, b:263216451
BRANCH=None
TEST=FW_NAME=markarth emerge-skyrim coreboot
Change-Id: I437425ac4a7cdb883dc213f5f6bb5f8a33a5577b
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71714
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
|
|
This picks up the following changes:
acf73954 phoenix: rename morgana to phoenix
a2c15297 mendocino: Upgrade SMU to 90.35.166
28983855 Update Picasso FSP binaries
This also updates the phoenix fw.cfg file that points to the submodule.
Signed-off-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com>
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I1d04d6232307dc913645a3d60ac3711018e2bdfb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71803
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Now that the next generation of APUs is officially announced, we can
unmask morgana.
The chip formerly known as Morgana is actually Phoenix.
Surprise!
This patch just changes the name across the entire codebase.
Note that the fw.cfg file will stay pointing to the
3rdparty/amd_blobs/morgana/psp directory until the amd_blobs_repo is
updated.
Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Change-Id: Ie9492a30ae9ff9cd7e15e0f2d239c32190ad4956
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71731
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
It has been reported that the PEIM graphics driver may temporarily
fail communication with the display if the time between libgfxinit
turning off the displays and the PEIM driver initialization is too
short. 200 ms has been identified as a safe delay.
This is a temporary workaround and an investigation is in progress to
come up with a better and long term solution.
BUG=b:264526798
BRANCH=firmware-brya-14505.B
TEST=Developer screen is systematically seen
Change-Id: I4ea15123eed1a4355c5ff7d815925032d4151de1
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71656
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
If memory training is going to happen and early graphics is supported
by the mainboard, an on-screen text message is displayed to inform the
end user.
Memory training can take a while and an impatient end user facing a
black screen for a while may reset the device unnecessarily.
BUG=b:252792591
BRANCH=firmware-brya-14505.B
TEST=On screen text message during MRC training observed on skolas
Change-Id: I4ea15123eed1a4355c5ff7d815925032d4151de0
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70300
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:252792591
BRANCH=firmware-brya-14505.B
TEST=On-screen text message seen during MRC training on skolas
with a few extra patches
Change-Id: I41c9cccb09dea52e2318f8f9ebeeda3697a7b514
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70304
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71696
|
|
BUG=b:252792591
BRANCH=firmware-brya-14505.B
TEST=Verify that VGA text mode is functional in romstage
Change-Id: I727b28bbe180edc2574e09bf03f1534d6282bdb2
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70303
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This CL requires the following libgfxinit patches:
- https://review.coreboot.org/c/libgfxinit/+/65087
- https://review.coreboot.org/c/libgfxinit/+/65178
- https://review.coreboot.org/c/libgfxinit/+/67489
- https://review.coreboot.org/c/libgfxinit/+/65140
- https://review.coreboot.org/c/libgfxinit/+/67490
- https://review.coreboot.org/c/libgfxinit/+/67491
- https://review.coreboot.org/c/libgfxinit/+/67492
- https://review.coreboot.org/c/libgfxinit/+/67493
- https://review.coreboot.org/c/libgfxinit/+/67494
- https://review.coreboot.org/c/libgfxinit/+/67495
- https://review.coreboot.org/c/libgfxinit/+/67496
- https://review.coreboot.org/c/libgfxinit/+/67497
- https://review.coreboot.org/c/libgfxinit/+/67498
- https://review.coreboot.org/c/libgfxinit/+/67499
- https://review.coreboot.org/c/libgfxinit/+/67500
- https://review.coreboot.org/c/libgfxinit/+/67800
- https://review.coreboot.org/c/libgfxinit/+/67801
- https://review.coreboot.org/c/libgfxinit/+/67802
- https://review.coreboot.org/c/libgfxinit/+/69341
BUG=b:252792591
BRANCH=firmware-brya-14505.B
TEST=libgfxinit is compiled with the Alder Lake configuration
Change-Id: I2de94556f8105447788aaa02340ad669fb68ca0c
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70301
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Zhixing Ma <zhixing.ma@intel.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch introduces an early graphics driver which can be used in
romstage in cache-as-ram mode. The implementation relies on
`libgfxinit' and provide VGA text mode support.
SoCs wanting to take advantage of this driver must implement the
`early_graphics_soc_panel_init' function to set the panel power
sequence timing parameters.
BUG=b:252792591
BRANCH=firmware-brya-14505.B
TEST=Graphics bring up observed on skolas with extra patches
Change-Id: Ie4ad1215e5fadd0adc1271b6bd6ddb0ea258cb5b
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70299
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Maulik Vaghela <maulikvaghela@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
TEST=Able to build and boot Google/Tanik and Skolas to OS.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I4a21122dbc324d3a396e8934e21d42f471cdb0bf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71567
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Enable the real-time tuning to improve performance in the real-time
environment for this mainboard.
Change-Id: I91ad7ca58add92b5cc66148aff8378890ee217eb
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71234
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Intel provides a Real-Time Tuning Guide for Elkhart Lake to improve
real-time behaviour of the SoC (see Intel doc #640979). It describes,
amongst knobs for the OS, a couple of firmware settings that need to be
set properly to reduce latencies in all the subsystems. Things like
clock and power gating as well as low power states for peripherals and
buses are disabled in this scenario.
This patch takes the mentioned UEFI parameters from the guide and
translates them to FSP-M and FSP-S parameters. In addition, a chip
config switch guards this tuning which can be selected on mainboard
level if needed.
When this real-time tuning is enabled, the overall system performance
in a real-time environment can be increased by 2-3%.
Change-Id: Ib524ddd675fb3ea270bacf8cd06cb628e895b4b6
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71233
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
pertinent header file
This patch moves ME host firmware status register structures to ME
header file. It also marks unused structure fields to reserved.
The idea here is to decouple ME specification defined structures from
the source file `.c` and keep those into header files so that in future
those spec defined header can move into common code.
The current and future SoC platform will be able to select the correct
ME spec header based on the applicable config. It might be also
beneficial if two different SoC platforms would like to use the same
ME specification and not necessarilly share the same SoC directory.
BUG=b:260309647
Test=Able to build and boot Google/rex
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: Ib3dafd6c030c0c848aa82b03bb336cc8fad14de3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71627
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
pertinent header file
This patch moves ME host firmware status register structures to ME
header file. It also marks unused structure fields to reserved.
The idea here is to decouple ME specification defined structures from
the source file `.c` and keep those into header files so that in future
those spec defined header can move into common code.
The current and future SoC platform will be able to select the correct
ME spec header based on the applicable config. It might be also
beneficial if two different SoC platforms would like to use the same
ME specification and not necessarilly share the same SoC directory.
BUG=b:260309647
Test=Able to build and boot Google/brya.
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: Ic14305b0479a8c57531d9930946eded7ac518b09
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71625
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Make will not find the build targets unless quotes are removed.
Change-Id: Iddf4e0cd8a11eaf327d6f55baf38a30c566d0f28
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71519
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The patch that introduced the selection of software connection manager,
CB:64561 - 060df17f1d (soc/intel/alderlake/acpi: Add Kconfig options for
SCM and FCM) added a default to enable the software configuration
manager directly in the choice.
This leads to warnings when running make menuconfig:
src/soc/intel/alderlake/Kconfig:439:
warning: defaults for choice values not supported
src/soc/intel/meteorlake/Kconfig:337:
warning: defaults for choice values not supported
src/soc/intel/tigerlake/Kconfig:299:
warning: defaults for choice values not supported
I'm not sure why the Kconfig linter didn't catch this, but this
issue is currently breaking the build for me. This patch fixes
it so that instead of setting the default directly, a new Kconfig
value is selected that then sets the default correctly.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I674046a93af8f7c2f3003900804deefa89dae295
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71776
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
Not all ports have retimers. Add a property to denote that a particular
port has a retimer (instead of assuming that all ports have retimers).
BUG=b:263964979
TEST=Verified on guybrush; SSDT shows retimer-switch on port1 when
device tree is updated accordingly.
Change-Id: I754323236d2912777b63cede0fce2ccf7882cfea
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71663
Reviewed-by: Robert Zieba <robertzieba@google.com>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ib24129829bef3764a8ba1e2c0d92bc42c5cfbc8d
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69708
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Change-Id: I3013bd5f29f1412fbe646dc74d8946704b750a66
Ticket: https://ticket.coreboot.org/issues/423
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69445
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
TCPA usually refers to log described by TPM 1.2 specification.
Change-Id: I896bd94f18b34d6c4b280f58b011d704df3d4022
Ticket: https://ticket.coreboot.org/issues/423
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69444
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
We will use BOE_TV110C9M_LL0 for geralt proto board, so update the
panel setting.
BUG=none
TEST=emerge-geralt coreboot;
see panel-BOE_TV110C9M_LL0 in coreboot.rom
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I28e9dd87350b55fdc609dd2c562c5a2ad578187c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71786
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
We should keep booting even failed to get the MIPI panel.
BUG=none
TEST=emerge-geralt coreboot;
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I39d9e04e5908f669ae2a1a8ce8858b93cae20654
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71785
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update setting for touchpad I2C frequency.
And meet touchpad i2c SPEC (380 ~ 400 kHz).
BUG=b:261159229
TEST=On frostflow, touchpad i2c spec from EE measure
Frequencies: I2C0 (Touchpad): 389 kHz
Change-Id: Ie9efd4e597e2701c98064185e5b39a6e256a5f1c
Signed-off-by: Rex Chou <rex_chou@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71772
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
|
|
cxl_mode VPD variable supports 3 modes: CXL_DISABLED,
CXL_SYSTEM_MEMORY and CXL_SPM.
Change-Id: Ib3bf85fbe687680db3c11efa908c4fb351be9c44
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71100
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
|
|
The Data Protected Range (DPR) needs to be set for all DPR devices,
not only the root device. Separate the setup from the memory
resource map reservation.
Change-Id: I7e49db23960e3938e8e158082be3c5ecf3cf95f3
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71143
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
|
|
Alder Lake and Tiger Lake had unnecessary lower-case 'i' in GPP_C0_IRQ
define name.
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Change-Id: Ida892b00e5a28544950cb9863d0ff2408a514576
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71819
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
|
|
A mainboard port needs to:
- select `CONFIG_MAINBOARD_HAS_EARLY_LIBGFXINIT'
- implement the Ada package `GMA.Mainboard' with a single function
`ports' that returns a list of ports to be probed for displays.
- set the desired `GFX_GMA_DEFAULT_MMIO' IO memory address to use
in romstage (and ramstage) for the graphic device.
BUG=b:252792591
BRANCH=firmware-brya-14505.B
TEST=libgfxinit compiles in romstage.
libgfxinit successfully executes in romstage and ramstage using
the requested MMIO setting on skolas.
Change-Id: I3c2101de10dc5df54fe873e43bbe0f1c4dccff44
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70276
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
SA_DEV_IGD is used by the early graphics feature implemented by the
Intel common block.
BUG=b:252792591
BRANCH=firmware-brya-14505.B
TEST=Compilation
Change-Id: Ic9f0fe1683d55a53c705ae717fe9e40fd8873d1f
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71793
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
As the used 'bool' type is defined in stdbool.h, include types.h
(instead of stdint.h) which includes all needed header files.
Change-Id: I3f75776575a7a5f70484411b9f3458530f706ec4
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71790
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds OC configuration of USB devices for MTL-RVP
as per MTL-RVP design specification,
USB 2.0
usb2_ports0 -> OC0
usb2_ports1 -> OC0
usb2_ports2 -> OC0
usb2_ports3 -> OC0
usb2_ports4 -> OC0
usb2_ports5 -> OC0
usb2_ports6 -> OC_SKIP
usb2_ports7 -> OC_SKIP
usb2_ports8 -> OC_SKIP
usb2_ports9 -> OC_SKIP
USB 3.2 Gen 2x1
usb3_ports0 -> OC0
usb3_ports1 -> OC0
TCPx
tcss_ports0 -> OC0
tcss_ports1 -> OC0
tcss_ports2 -> OC0
tcss_ports3 -> OC0
BUG=b:224325352
TEST=Able to build with the patch and boot the mtlrvp to chromeOS
(on top of CB: 66190).
Signed-off-by: Harsha B R <harsha.b.r@intel.com>
Change-Id: If1a0c31b7bf0f3fc06f039ad76b0cdd41f7cdd90
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71168
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Usha P <usha.p@intel.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
Disable devices in variant.c instead of adding probe statements to
devicetree because storage devices need to be enabled when fw_config is
unprovisioned, and devicetree does not currently support this (it
disables all probed devices when fw_config is unprovisioned).
BUG=b:263920313
TEST=Boot to OS on craask eMMC and NVMe SKUs with both unprovisioned
fw_config and fw_config set correctly.
Change-Id: I4167ee4d00b9ae8fe074c6f5e7a2d5a7382bfe6d
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71726
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
Disable devices in variant.c instead of adding probe statements to
devicetree because storage devices need to be enabled when fw_config is
unprovisioned, and devicetree does not currently support this (it
disables all probed devices when fw_config is unprovisioned).
BUG=b:251055188
TEST=Boot to OS on yaviks eMMC and UFS SKUs with both unprovisioned
fw_config and fw_config set correctly.
On UFS SKU with fw_config set, eMMC no longer shows up in lspci.
(On eMMC SKU, UFS and ISH were already disabled by the coreboot PCI scan
so there's no change in behaviour.)
Change-Id: I31402cb49cffefd98b6fed971f249528448b1d0d
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71725
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
Add new memory parts in the mem_parts_used.txt and generate the
SPD ID for the parts. The memory parts being added are:
1) Samsung K3KL8L80CM-MGCT
2) Hynix H58G56BK7BX068
3) Micron MT62F1G32D2DS-026 WT:B
4) Micron MT62F512M32D2DR-031 WT:B
BUG=b:264340545
BRANCH=firmware-brya-14505.B
TEST=FW_NAME=omnigul emerge-brya coreboot
Change-Id: I699070596a77c975254660a1ba74b0f40026186d
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71756
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
It used to say "FSP-M binary larger than FSP_M_FILE", but
FSP_M_FILE is the binary itself. The binary file size is
actually compared with FSP_M_SIZE.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Change-Id: If58069944aea8e68117f2ee1d320726d8c6fdfc8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65440
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
This patch adds initial romstage code and spd data for DDR5 memory
parts for MTL-RVP. This also configures memory based on the board id.
Memory - x32 DDR5 SBS SODIMM 1DPC
Vendor/Model - SK-Hynix/HMCG66MEBSA092N
BUG=b:224325352
TEST=Able to boot intel/mtlrvp (DDR5 SKU) to ChromeOS
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Change-Id: I0e1a26d99e170311a89412f44b7cbb0430788f58
Signed-off-by: Harsha B R <harsha.b.r@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66190
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Usha P <usha.p@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Add supported memory parts in the mem_parts_used.txt and generate the
SPD ID for the parts.
BUG=b:260934724, b:255447299
BRANCH=dedede
TEST=build
Change-Id: I8c95ced79e14bb4a99aa1fa5f4fc3bc0681cc1cc
Signed-off-by: Liam Flaherty <liamflaherty@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71710
Reviewed-by: Adam Mills <adamjmills@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Sam McNally <sammc@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add the first version DPTF parameters.
BUG=b:264217345
BRANCH=firmware-brya-14505.B
TEST=emerge-brya coreboot chromeos-bootimage
Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com>
Change-Id: I55a3066ef61ce461f40b425a6549d083c29256e5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71634
Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Kyle Lin <kylelinck@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
The patch adds Kconfigs to define scaling factor for Efficient and
Performance cores instead of using hard coded values in the soc code.
Also, the patches uses the Kconfigs directly to calculate the core's
nominal performance. So, we don't need to implement soc function
soc_get_scaling_factor() to get the scaling factor data for different
core types. Hence, soc_get_scaling_factor() function is removed.
TEST=Build the code for Gimble and Rex. Also, I have verified that
build system logs error when the Kconfigs are undefined.
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I55e4d815116ef40c5f33be64ab495e942bf35ee8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71687
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Replace the intelblocks/gpio.h, soc/gpio.h and soc/gpio_defs.h
includes with the common gpio.h which will include soc/gpio.h
which will include intelblocks/gpio.h which will include
soc/gpio_defs.h
BUG=b:261778357
TEST=Able to build and boot Google/rex.
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: I58e428cde5e13f4f0dfe528d798c0613b7f8a94a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71630
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
When the watchdog timer reaches 0, the timer value won't reset to the
default value unless there is an external reset or a kick. It will
result in the watchdog failing to trigger the reset signal.
We kick the watchdog to reset the timer to the default value. Also,
because WDT hardware needs about 94us to synchronize the registers,
add a 100us delay before triggering the reset signal.
BUG=b:264003005, b:264017048
BRANCH=corsola
TEST= Reboot successfully with the following cmd
stop daisydog
sleep 60 > /dev/watchdog&
Signed-off-by: Runyang Chen <runyang.chen@mediatek.corp-partner.google.com>
Signed-off-by: Kuan-Hsun Cheng <allen-kh.cheng@mediatek.com>
Change-Id: Ic4964103d54910c4a1e675b59c362e93c2213b19
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71754
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When AP boots up after Cr50 firmware update and reboot, AP finds
that Cr50 reset is required for Cr50 to pick the new firmware so
it trigger Cr50 reset and power off the system, AP expects system
will power on automatically after Cr50 reset. However this is not
the case for Chromebox, Chromebox EC set AP_IDLE flag when system
is shutting down, when AP_IDLE flag is set in EC, the system stays
at S5/G3 and wait for power button presssend. It cause an issue in
factory that the operator needs to press power button to power on
the DUT after Cr50 firmware update.
This patch sends EC command to direct EC to clear AP_IDLE flag
after AP shutdown so AP can boot up when Cr50 reset.
BUG=b:261119366
BRANCH=firmware-brya-14505.B
TEST=DUT boots up after Cr50 firmware update in factory test flow
Change-Id: If97ffbe65f4783f17f4747a87b0bf89a2b021a3b
Signed-off-by: Derek Huang <derekhuang@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70773
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch introduces a new config named `DEFAULT_ADL_NEM` and
allows respective brya variants with Alder Lake ESx samples to
choose NEM over eNEM as eNEM was fuse disabled till ESx.
TEST=The boot flow related to eNEM and NEM behaviour remains the
same with and without this patch.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ibbd492a3d210739120c7ad16415cb7912f5b70ec
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71743
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Disable touch panel power for non-touch sku by fw_config TOUCH field.
BUG=b:263452842
BRANCH=firmware-brya-14505.B
TEST=emerge-brya coreboot chromeos-bootimage
Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com>
Change-Id: I4736f94481512806377b733b26fdc7290046c555
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71691
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kyle Lin <kylelinck@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Due to mainboard restrictions a SATA link at Gen 3 (6 Gbps) can cause
issues as the margin is not big enough. Limit SATA speed to Gen 2 to
achieve a more robust SATA connection.
Change-Id: Ia79998db5f959528a4e8e29e570a7f55283adee1
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71230
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
In cases where there are limitations on the mainboard it can be
necessary to limit the used SATA speed even though both, the SATA
controller and disk drive support a higher speed rate. The FSP parameter
'SataSpeedLimit' allows to set the speed limit.
This patch provides a chip config so that this FSP parameter can be
set as needed in the devicetree on mainboard level.
Change-Id: I610263b34b0947378d2025211ece4a9ec8fbfef6
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71229
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Change-Id: Id24a7c7db24f49672df9d5ceefec5b7596f23e09
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64939
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|