| Age | Commit message (Collapse) | Author |
|---|
|
This patch introduces a new config named `DEFAULT_ADL_NEM` and
allows respective brya variants with Alder Lake ESx samples to
choose NEM over eNEM as eNEM was fuse disabled till ESx.
TEST=The boot flow related to eNEM and NEM behaviour remains the
same with and without this patch.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ibbd492a3d210739120c7ad16415cb7912f5b70ec
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71743
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Disable touch panel power for non-touch sku by fw_config TOUCH field.
BUG=b:263452842
BRANCH=firmware-brya-14505.B
TEST=emerge-brya coreboot chromeos-bootimage
Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com>
Change-Id: I4736f94481512806377b733b26fdc7290046c555
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71691
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kyle Lin <kylelinck@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Due to mainboard restrictions a SATA link at Gen 3 (6 Gbps) can cause
issues as the margin is not big enough. Limit SATA speed to Gen 2 to
achieve a more robust SATA connection.
Change-Id: Ia79998db5f959528a4e8e29e570a7f55283adee1
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71230
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
In cases where there are limitations on the mainboard it can be
necessary to limit the used SATA speed even though both, the SATA
controller and disk drive support a higher speed rate. The FSP parameter
'SataSpeedLimit' allows to set the speed limit.
This patch provides a chip config so that this FSP parameter can be
set as needed in the devicetree on mainboard level.
Change-Id: I610263b34b0947378d2025211ece4a9ec8fbfef6
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71229
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Change-Id: Id24a7c7db24f49672df9d5ceefec5b7596f23e09
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64939
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Now that power sequencing has been implemented, switch from using ACPI
"probed" flag to "detect" flag for all i2c touchscreens. This removes
non-present devices from the SSDT and relieves the OS of the burden of
probing.
BUG=b:121309055
TEST=build/boot Windows/linux on multiple dedede variants, verify all
touchscreens functional in OS, dump ACPI and verify only i2c devices
actually present on the board have entries in the SSDT.
Change-Id: I91e03bd1d96a6b2f0c3813665910133db0d6c308
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71189
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
The GPIOs themselves are configured as level triggered, and the drivers
(both Linux and Windows) work better with LEVEL vs EDGE triggering.
TEST=tested with rest of patch train
Change-Id: I212533ffdfb05f841e722c130b52c2976272e670
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71188
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
For touchscreens on dedede variants, drive the enable GPIO high
starting in romstage, then disable the reset GPIO in ramstage. This will
allow coreboot to detect the presence of i2c touchscreens during ACPI
SSDT generation (implemented in a subsequent commit).
Since the fast majority of dedede variants have a touchscreen option,
and those that do use the same GPIOs for enable/reset, set the GPIOs for
touchscreen operation in the baseboard and then override for the few (3)
variants that do not have a touchscreen.
BUG=b:121309055
TEST=tested with rest of patch train
Change-Id: Ib95e23545cc3e8589ddbd9e18cd0533bec9333e0
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71187
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Add method variant_romstage_gpio_table() with empty weak implementation
to allow variants to override as needed for touchscreen power
sequencing (to be implemented in a subsequent commit). Call method
in romstage to program any GPIOs the variant may need to set.
TEST=tested with rest of patch train
Change-Id: Ic216827a4b53d1d35913efca63a43d4672791c54
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71186
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Change-Id: I080b7b579338c3cf342beabda54f43f525d8b65c
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71679
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: I5169a900345e2aabefcf1e2c249ee4bce6dc8fc5
Signed-off-by: Ritul Guru <ritul.bits@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71688
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: Ieaad72a6b964f4b2ab572733694def88e30888a3
Signed-off-by: Ritul Guru <ritul.bits@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71689
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Remove TODO comments after reviewing against mendocino ppr #57243, rev
3.00
BUG=263563246
TEST=build skyrim
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: Ie56d481dd8b6b4e0a1e3d50f4ce75f50231fe4dc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71719
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Replace spaces with tabs for consistency.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I65b9bec7443094dfd2f6b0d6b11e0100023873b2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71721
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Remove redundant nested check for ACPI support.
Change-Id: Ie4b40382d304028135bcdd7851e2f48333570421
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66698
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
This avoids the warning of casting pointers to integers of different
size.
Change-Id: I7bcb6dbf286438115c854d618eaa2da21c81400d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69389
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
The dGPU used for some Brya projects requests 33 bits of address
space for one of its BARs via the Resizable BAR mechanism
(requires 6GB).
This Kconfig is currently set at 32 bits for brya, so the allocation currently is capped at 32 bits (4GB). This patch sets the limit to 33
bits for brya boards, which is enough for the GPU.
BUG=b:214443809
TEST=all of the dGPU PCI BARs on agah can be successfully allocated
Change-Id: Ia791be5108fb07a256ae62fc2aee2f057909ef12
Signed-off-by: Tarun Tuli <tarun@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71282
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Adjust LAN LED config to 0x060f.
BUG=b:246657849
TEST=emerge-brask coreboot
Change-Id: Idd5ed2bf7eb4ee5990f2a842cba43f967ae3825e
Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71698
Reviewed-by: Kevin Chiu <kevin.chiu.17802@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ricky Chang <rickytlchang@google.com>
|
|
Adjust LAN LED config to 0x060f.
BUG=b:239513596
TEST=emerge-brask coreboot
Change-Id: I17b844b89569fb7653454fd08782fc961c715817
Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71697
Reviewed-by: Kevin Chiu <kevin.chiu.17802@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ricky Chang <rickytlchang@google.com>
|
|
get_cpu_index() helper function returns cpu's index based on it's APIC
id position from the ascending order list of cpus' APIC IDs.
In order to calculate the cpu's index, the helper function needs to
traverse through each cpu node to find their APIC IDs. So, the function
traverse the CPU node list from the cpu whose APIC ID is 0 assuming it
is the first cpu node in the list. This logic works fine where BSP's
APIC ID is 0. But, starting from MTL, APIC ID for BSP need not be 0 as
APIC ID numbering first get assigned for CPU Die Efficient cores, then
Performance cores.
Please refer section# 6.1 of doc#643504 for more details on APIC IDs.
Considering the APIC Id allotment for MTL cores, as existing code
traversing begins from the cpu that has APIC Id#0 which may not be the
first cpu node in the list so index calculation results in wrong value.
The patch addresses above described issue by traversing all the CPU
nodes to calculate the cpu index. Also, prevents inconsistent report
of /sys/devices/system/cpu/cpu*/cpufreq/* and
/sys/devices/system/cpu/cpuXX/acpi_cppc on each reboot.
TEST=Verified that the get_cpu_index helper function returns the correct
index id for a CPU on Rex.
The coreboot log with code instrumentation, before this patch:
[DEBUG] my_apic_id:0x10 cpu_index: 0x6
[DEBUG] my_apic_id:0x11 cpu_index: 0x6
[DEBUG] my_apic_id:0x42 cpu_index: 0x6
[DEBUG] my_apic_id:0x21 cpu_index: 0x6
[DEBUG] my_apic_id:0x40 cpu_index: 0x6
[DEBUG] my_apic_id:0x31 cpu_index: 0x6
[DEBUG] my_apic_id:0x39 cpu_index: 0x6
[DEBUG] my_apic_id:0xa cpu_index: 0x3
[DEBUG] my_apic_id:0x0 cpu_index: 0x0
[DEBUG] my_apic_id:0x8 cpu_index: 0x2
[DEBUG] my_apic_id:0x4 cpu_index: 0x2
[DEBUG] my_apic_id:0x28 cpu_index: 0x6
[DEBUG] my_apic_id:0x2 cpu_index: 0x1
[DEBUG] my_apic_id:0x38 cpu_index: 0x6
[DEBUG] my_apic_id:0x29 cpu_index: 0x6
[DEBUG] my_apic_id:0xe cpu_index: 0x5
[DEBUG] my_apic_id:0x6 cpu_index: 0x2
[DEBUG] my_apic_id:0x20 cpu_index: 0x6
[DEBUG] my_apic_id:0x30 cpu_index: 0x6
[DEBUG] my_apic_id:0x19 cpu_index: 0x6
[DEBUG] my_apic_id:0xc cpu_index: 0x4
[DEBUG] my_apic_id:0x18 cpu_index: 0x6
We can see same cpu_index for multiple cores before fix.
After this patch..
[DEBUG] my_apic_id:0x10 cpu_index: 0x8
[DEBUG] my_apic_id:019 cpu_index: 0xb
[DEBUG] my_apic_id:0x11 cpu_index: 0x9
[DEBUG] my_apic_id:0x18 cpu_index: 0xa
[DEBUG] my_apic_id:0x40 cpu_index: 0x14
[DEBUG] my_apic_id:0x30 cpu_index: 0x10
[DEBUG] my_apic_id:0x42 cpu_index: 0x15
[DEBUG] my_apic_id:0xc cpu_index: 0x6
[DEBUG] my_apic_id:0x2 cpu_index: 0x1
[DEBUG] my_apic_id:0x29 cpu_index: 0xf
[DEBUG] my_apic_id:0xe cpu_index: 0x7
[DEBUG] my_apic_id:0x20 cpu_index: 0xc
[DEBUG] my_apic_id:0x0 cpu_index: 0x0
[DEBUG] my_apic_id:0x31 cpu_index: 0x11
[DEBUG] my_apic_id:0x28 cpu_index: 0xe
[DEBUG] my_apic_id:0x21 cpu_index: 0xd
[DEBUG] my_apic_id:0xa cpu_index: 0x5
[DEBUG] my_apic_id:0x38 cpu_index: 0x12
[DEBUG] my_apic_id:0x8 cpu_index: 0x4
[DEBUG] my_apic_id:0x4 cpu_index: 0x2
[DEBUG] my_apic_id:0x39 cpu_index: 0x13
Change-Id: I69e5e6231dd18b43d439340aaed50eb9edeca3b7
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70751
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Sukumar Ghorai <sukumar.ghorai@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch makes the call into TXT lib in order to disable the TXT
if SoC user haven't selected the `INTEL_TXT` config. Disabling TXT
would be helpful to access VGA framebuffer prior calling into FSP-M.
TEST=Able to perform disable_txt and unlock memory which helped to
access VGA framebuffer prior calling into FSP-M.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I9dd7c5492a5f45eef0dd9e836cc2da1844c78919
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71575
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Add a function to disable TXT as per TXT BIOS spec Section 6.2.5. AP
firmware can disable TXT if TXT fails or TPM is already enabled.
On platforms with TXT disabled, the memory can be unlocked using
MSR 0x2e6.
TEST=Able to perform disable_txt on SoC SKUs with TXT enabled.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I27f613428e82a1dd924172eab853d2ce9c32b473
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71574
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Enable DPTC support for markarth.
BUG=b:263216451
TEST=emerge-skyrim coreboot
Change-Id: I18c2c840037f65f4f2ca92054247cece28843e45
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71720
Reviewed-by: Tim Van Patten <timvp@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Follow thermal table from thermal team.
1. Enable TS3 thermal sensor.
2. Set TS3 passive policy to 63.
3. Set TS3 critical policy to 73.
4. Modify TSR2 passive policy to CPU.
BUG=b:263554342
TEST=emerge-nissa coreboot chromeos-bootimage
Change-Id: Ia1fcaee15a8b58b755ce0a48a1978e795b66efd7
Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71658
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: AlanKY Lee <alanky_lee@compal.corp-partner.google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Add ACPI DmaProperty for gladios.
BUG=b:239513596
TEST=Verified SSDT on gladios unit.
Before:
Scope (\_SB.PCI0.RP01)
{
Device (RLTK)
{
Name (_HID, "R8168") // _HID: Hardware ID
Name (_UID, 0xD0E889DD) // _UID: Unique ID
Name (_DDN, "Realtek r8168") // _DDN: DOS Device Name
Name (_ADR, 0x00000000) // _ADR: Address
Name (_PRW, Package (0x02) // _PRW: Power Resources for Wake
{
0x07,
0x03
})
}
}
After:
Scope (\_SB.PCI0.RP01)
{
Device (RLTK)
{
Name (_HID, "R8168") // _HID: Hardware ID
Name (_UID, 0xD0E889DD) // _UID: Unique ID
Name (_DDN, "Realtek r8168") // _DDN: DOS Device Name
Name (_ADR, 0x00000000) // _ADR: Address
Name (_PRW, Package (0x02) // _PRW: Power Resources for Wake
{
0x07,
0x03
})
Name (_DSD, Package (0x02) // _DSD: Device-Specific Data
{
ToUUID ("70d24161-6dd5-4c9e-8070-705531292865"),
Package (0x01)
{
Package (0x02)
{
"DmaProperty",
One
}
}
})
}
}
Change-Id: I1c4f6ff7b3eda114f4f365a963c089fe584d8aee
Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71699
Reviewed-by: Kevin Chiu <kevin.chiu.17802@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
PRMRR is used by many Intel SOC features, not just Intel SGX.
As of now SGX and Key Locker are the features that need PRMRR.
Untie it from Intel SGX specific files and move to common cpulib.
Also rename PRMRR size config option. Use the renamed PRMRR size
config option to set the PRMRR size.
TEST=Able to set PRMRR size using config.
Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com>
Change-Id: I0cd49a87be0293530705802fd9b830201a5863c2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70819
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
This patch decouples useful TXT related operations from the romstage.c
file alone and moves them into a helper txtlib.c. This effort will be
helpful for SoC users to perform TXT related operations
(like Disabling TXT) even without selecting INTEL_TXT config.
At present, those helper functions are only available upon selecting
INTEL_TXT which is not getting enabled for most of the SoC platform in
the scope of the Chromebooks.
TEST=Able to access functions from txtlib.c even without selecting
INTEL_TXT config.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Iff5b4e705e18cbaf181b4c71bfed368c3ed047ed
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71573
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
Sometimes, server platforms may have more than one socket on server
board. However, there's no field to store information about which
socket the DIMM comes from in dimm_info structure.
This patch adds soc_num field in dimm_info structure to store socket
ID of the DIMM.
Signed-off-by: Tim Chu <Tim.Chu@quantatw.com>
Change-Id: I1b9e2b87fda2d7c32ecb8ce9d989795c8b869cea
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70662
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
|
|
Also disable TCO timer through calling tco_configure().
If tco_configure() is not called, the TCO timeout would
trigger SMI periodically about every 2 seconds with SMM log:
"TCO_STS: BIT18 TIMEOUT"
Tested=On AC CRB, does not see periodic SMI log.
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Change-Id: I2d307ad16109ae11862dd5e5acc0f12f47b22582
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71141
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
|
|
If cbmem_top is not 1M aligned there will be a hole between DPR base
and cbmem_top that the allocator will consider as unassigned memory.
Resources could incorrectly be assigned to that region and the final
MTRR solution will also try to skip that hole, therefore using a lot
more variable MTRRs than needed.
TESTED on Archer City 2S system: Uses 1 variable MTRR in the final
setup instead of 7.
Change-Id: I198f8d83bcfcdca3a770bd7f9a7060d5782a49fe
Signed-off-by: Arthur Heymans <arthur.heymans@9elements.com>
Signed-off-by: Jonathan Zhang <jonzhang@meta.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71142
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
|
|
values by macros
Macro definitions are from DMTF System Management BIOS (SMBIOS)
Reference Specification (DSP0134) Chapter 7.5.5.
Change-Id: Ifed1d773b0b349f878648b8172fd770a397e9686
Signed-off-by: Li, Jincheng <jincheng.li@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71633
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Software Connection Manager doesn't work with Linux 5.13 or later,
resulting in TBT ports timing out. Not advertising this results
in Firmware Connection Manager being used and TBT works
correctly.
Add Kconfig options to chose between SCM (Software Connection
Manager) and FCM (Firmware Connection Manager). FCM is primary, as
it's more compatible save for ChromeOS devices as ChromeOS uses
SCM.
Linux patch:
torvalds/linux@c6da62a
c6da62a219d028de10f2e22e93a34c7ee2b88d03
Tested with StarBook Mk VI (i7-1260P).
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Iac31d37c0873f41f7b14e1051fe214466d1ebdd8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64561
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
This patch adds the support to enable/disable package c-state demotion
feature from the devicetree based on mainboard requirement.
Port of commit 4be8d9e80deb ("soc/intel/adl: Add support to configure
package c-state demotion")
BUG=none
TEST=Boot to the OS on Google/Rex.
Snippet from FSP log:
[SPEW ] PkgCState Demotion : 0x1
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I0a4b0b181349ce41035524482add4336cf83a68b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71654
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This patch configures max Pkg C-state to Auto which limits the max
C-state to deep C-state.
Port of commit af42906efa72 ("soc/intel/alderlake: Set max Pkg C-states
to Auto")
BUG=none
TEST=Boot to the OS on Google/Rex.
Snippet from FSP log:
[SPEW ] PkgCStateLimit : 0xFF
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: Ic403ab83a594b04920d5cf600432939687a2598b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71653
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I2d5700534c07e89b3908a2e6b827db919a48795d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71591
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Because skyrim is loading ramstage from SPI with the DMA engine, the
size of the compressed image is less important to load speed than
decompression time.
Because the LZ4 decompression is so much faster than LZMA, compressing
with LZ4 saves us roughly 30ms in boot time.
For size, we're spending roughly 57KiB:
fallback/ramstage 0x9b00 stage 130864 LZMA (305316 decompressed)
fallback/ramstage 0x9b00 stage 189126 LZ4 (305316 decompressed)
Right now we have 2MiB empty space in Skyrim's RO before this change,
and roughly 550KiB empty space in RW, so there aren't currently any
size worries.
Just for fun, I also tested uncompressed ramstage, and it was still
18ms faster than LZMA, but that makes it roughly 12ms slower than LZ4.
BUG=b:264409477
TEST=Boot skyrim, look at boot speed.
Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Change-Id: Iedde6fc2db9d702c0ff2b0081e7baa254ac6699f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71675
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Previously, LZMA was included in romstage because it was almost always
needed to decompress ramstage. When compressing ramstage with LZ4, but
using LZMA compression for FSP-M, we still need the LZMA decompression
to be present, so update when the Makefile includes the LZMA decoder.
Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Change-Id: Id52d25a13420f05db8b2b563de0448f9d44638e0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71674
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
When ramstage is loaded asynchronously, as on the skyrim boards, the
faster decompression of LZ4 allows for faster boot times than the
tighter compression of LZMA.
To make this change, the name of the existing ramstage_compression
option needs to be updated.
BUG=b:264409477
TEST=Boot skyrim, look at boot speed
Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Change-Id: I27dd1a8def024e0efd466cef9ffd9ca71717486a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71673
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Create the dibbi variant of the waddledee reference board by
copying the template files to a new directory.
BUG=b:260934018
BRANCH=dedede
TEST=util/abuild/abuild -p none -t google/dedede -x -a includes
GOOGLE_DIBBI
Change-Id: I3b8d4e7f8a53323f56567cbbc03bab7f8804f286
Signed-off-by: Liam Flaherty <liamflaherty@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71709
Reviewed-by: Adam Mills <adamjmills@google.com>
Reviewed-by: Sam McNally <sammc@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add new ram_id:0000 for Micron MT62F1G32D2DS-026 WT:B.
Add new ram_id:0010 for Micron MT62F512M32D2DR-031 WT:B
The RAM ID table has been assigned as:
DRAM Part Name ID to assign
K3KL8L80CM-MGCT 0 (0000)
H58G56BK7BX068 0 (0000)
MT62F1G32D2DS-026 WT:B 0 (0000)
K3KL9L90CM-MGCT 1 (0001)
H58G66BK7BX067 1 (0001)
MT62F2G32D4DS-026 WT:B 1 (0001)
MT62F512M32D2DR-031 WT:B 2 (0010)
BUG=b:263296326, b:263216451
BRANCH=None
TEST=FW_NAME=markarth emerge-skyrim coreboot
Change-Id: I3a0d3edb813ef91bfdc68f7400be64fb679dfc04
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71619
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
|
|
Enable eNEM for all nissa variants. This is mostly done to be consistent
with other recent Intel platforms. It's not strictly necessary since on
nissa the LLC size is larger than the total code + data size used in
CAR. There is no change in boot time.
BUG=None
TEST=Boot to OS on craask
Change-Id: Iad48976e405403ab61c71d8f72e0616ea8b85ebd
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71707
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This bit is dropped in factory. All skus can use table ID_0.
BUG=b:251287101
TEST=build passed.
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: I4298376899f881dd2265aef5a0bbc5bcc46728a1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71690
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When EC_GOOGLE_CHROMEEC_INCLUDE_SSFC_IN_FW_CONFIG is enabled and
SSFC is not set, it will treat missing SSFC as zero, so Kano needs
to set the ov2740 to 0 to avoid probing wrong mipi camera.
Before patch
>fw_config match found: UFC=UFC_MIPI_OVTI2740
>fw_config match found: AUDIO=MAX98373_NAU88L25B_I2S
>fw_config match found: AUDIO=MAX98373_NAU88L25B_I2S
>fw_config match found: AUDIO=MAX98373_NAU88L25B_I2S
>fw_config match found: UFC=UFC_MIPI_OVTI2740
>fw_config match found: ZYDRON_UFC=UFC_MIPI_HI556
>fw_config match found: UFC=UFC_MIPI_OVTI2740
>fw_config match found: STYLUS=STYLUS_PRESENT
After patch
>fw_config match found: UFC=UFC_MIPI_OVTI2740
>fw_config match found: AUDIO=MAX98373_NAU88L25B_I2S
>fw_config match found: AUDIO=MAX98373_NAU88L25B_I2S
>fw_config match found: AUDIO=MAX98373_NAU88L25B_I2S
>fw_config match found: UFC=UFC_MIPI_OVTI2740
>I2C: 00:20 disabled by fw_config
>fw_config match found: UFC=UFC_MIPI_OVTI2740
>fw_config match found: STYLUS=STYLUS_PRESENT
BUG=b:262939431
TEST=Boot on kano and check functional with ov2740 camera.
Change-Id: I46fac6c820d6006956680a07198db82225630905
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71628
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This is support for adding legacy VGA support into romstage.
Support for this is being provided by libgfxinit.
The current use case allows us to initialize the display
before memory init (prior to physical memory init) to inform
the user when lengthy memory training is needed.
BUG=b:252792591
BRANCH=firmware-brya-14505.B
TEST=VGA code compiles for romstage
Change-Id: I81309871e8db71657b2a9816708141f121d767d3
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70278
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch disables the stage cache to save boot time.
Note: S3 is not POR for Intel MTL mobile skus.
Boot time is reduced by ~8ms.
Boot time before:
4:end of romstage 1,391,225 (13,724)
100:start of postcar 1,403,339 (12,114)
Boot time after:
4:end of romstage 1,380,262 (5,618)
100:start of postcar 1,392,323 (12,060)
Change-Id: I9775fc628f345a514894f30435a374e2ffa057c1
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71695
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
While pademelon may be a desktop board, it's not available for purchase,
which means it should be presented here as an eval board.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I5038935bb6f2ba530ea6e16ac84c1746efec8e48
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71580
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Remove smbios_mainboard_bios_version so that the default
CONFIG_LOCALVERSION can be used.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ia94f8683a54a98f4e3b1f51521db7e3ccb56ba48
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70855
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
The CR50 code clears the post code value. Add this as a #define.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: If3b73a3159ac8ac9ab08c6ff705b0ca289ab453c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71592
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
The patch addresses Intel heterogeneous cores as `Efficient` and
`Performance` cores instead of `small` and `big` cores. It is to ensure
coreboot code has uniform reference to the heterogeneous cores. So, the
patch renames all `small` and `big` core references to `efficient` (eff)
and `performance` (perf) cores respectively.
TEST=Build the code for Brya and Rex boards
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I98c9c0ed86b211d736a0a1738b47410faa13a39f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71639
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Add below mentioned functions:
is_sgx_configured_and_supported():
Checks if SGX is configured and supported
is_keylocker_configured_and_supported():
Checks if Key Locker is configured and supported
check_prm_features_enabled():
Checks if any of the features that need PRM are configured
and supported. As of now SGX and Key Locker are the only
features that need PRM.
Also, call check_prm_features_enabled() from get_valid_prmrr_size()
to make sure PRM dependent features are enabled and configured before
returning PRMRR size.
Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com>
Change-Id: I51d3c144c410ce4c736f10e3759c7b7603ec3de9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71569
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Add INTEL_KEYLOCKER Kconfig option. Disable it by default. The
specification of Key Locker can be found via document #343965
on Intel's site.
Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com>
Change-Id: Ia78e9bfe7ba2fd4e45b4821c95b19b8e580dccab
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71118
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
Fix:
cc1: error: src/mainboard/amd/mandolin/acpi: No such file or directory [-Werror=missing-include-dirs]
Change-Id: Ifbe6fda12088ddf51b6a177116aa542dbacc7672
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71255
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Fix:
cc1: error: src/mainboard/amd/bilby/acpi: No such file or directory [-Werror=missing-include-dirs]
Change-Id: Ie167cd362b55e38870d26a877d8181b2b07b8639
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71254
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Since GPIO IO-APIC IRQs are fixed in hardware (RO registers), this patch
allows MTL boards to dynamically assign PCI IRQs. This means not relying
on FSP defaults, which eliminates the problem of PCI IRQs interfering
with GPIO IRQs routed to the same IRQ, when both have selected IO-APIC
routing.
BUG=none
TEST=Build and boot to google/rex. Check dmesg and make sure that there
is no regression.
IO-APIC interrupts before:
1: IO-APIC 1-edge i8042
8: IO-APIC 8-edge rtc0
9: IO-APIC 9-fasteoi acpi
14: IO-APIC 14-fasteoi INTC1083:00
16: IO-APIC 16-fasteoi idma64.5, ttyS0, intel-ipu6
28: IO-APIC 28-fasteoi idma64.6, pxa2xx-spi.6
29: IO-APIC 29-fasteoi i2c_designware.3
30: IO-APIC 30-fasteoi i2c_designware.4
32: IO-APIC 32-fasteoi idma64.0, i2c_designware.0
33: IO-APIC 33-fasteoi idma64.1, i2c_designware.1
35: IO-APIC 35-fasteoi idma64.2, i2c_designware.2
88: IO-APIC 88-fasteoi ELAN0000:00
89: IO-APIC 89-fasteoi chromeos-ec
99: IO-APIC 99-edge cr50_i2c
106: IO-APIC 106-fasteoi chromeos-ec
IO-APIC interrupts after:
1: IO-APIC 1-edge i8042
8: IO-APIC 8-edge rtc0
9: IO-APIC 9-fasteoi acpi
14: IO-APIC 14-fasteoi INTC1083:00
16: IO-APIC 16-fasteoi intel-ipu6
20: IO-APIC 20-fasteoi idma64.5, ttyS0
27: IO-APIC 27-fasteoi idma64.0, i2c_designware.0
28: IO-APIC 28-fasteoi idma64.1, i2c_designware.1
30: IO-APIC 30-fasteoi idma64.2, i2c_designware.2
31: IO-APIC 31-fasteoi i2c_designware.3
32: IO-APIC 32-fasteoi i2c_designware.4
35: IO-APIC 35-fasteoi idma64.6, pxa2xx-spi.6
88: IO-APIC 88-fasteoi ELAN0000:00
89: IO-APIC 89-fasteoi chromeos-ec
99: IO-APIC 99-edge cr50_i2c
106: IO-APIC 106-fasteoi chromeos-ec
_PRT before:
Package (0x04) ==> 0x001FFFFF, Zero, Zero, 0x10
Package (0x04) ==> 0x001FFFFF, One, Zero, 0x11
Package (0x04) ==> 0x001FFFFF, 0x02, Zero, 0x12
Package (0x04) ==> 0x001FFFFF, 0x03, Zero, 0x13
Package (0x04) ==> 0x001EFFFF, Zero, Zero, 0x10
Package (0x04) ==> 0x001EFFFF, One, Zero, 0x11
Package (0x04) ==> 0x001EFFFF, 0x02, Zero, 0x1B
Package (0x04) ==> 0x001EFFFF, 0x03, Zero, 0x1C
Package (0x04) ==> 0x001CFFFF, Zero, Zero, 0x10
Package (0x04) ==> 0x001CFFFF, One, Zero, 0x11
Package (0x04) ==> 0x001CFFFF, 0x02, Zero, 0x12
Package (0x04) ==> 0x001CFFFF, 0x03, Zero, 0x13
Package (0x04) ==> 0x0019FFFF, Zero, Zero, 0x1D
Package (0x04) ==> 0x0019FFFF, One, Zero, 0x1E
Package (0x04) ==> 0x0019FFFF, 0x02, Zero, 0x1F
Package (0x04) ==> 0x0017FFFF, Zero, Zero, 0x10
Package (0x04) ==> 0x0016FFFF, Zero, Zero, 0x10
Package (0x04) ==> 0x0016FFFF, One, Zero, 0x11
Package (0x04) ==> 0x0016FFFF, 0x02, Zero, 0x12
Package (0x04) ==> 0x0016FFFF, 0x03, Zero, 0x13
Package (0x04) ==> 0x0015FFFF, Zero, Zero, 0x20
Package (0x04) ==> 0x0015FFFF, One, Zero, 0x21
Package (0x04) ==> 0x0015FFFF, 0x02, Zero, 0x22
Package (0x04) ==> 0x0015FFFF, 0x03, Zero, 0x23
Package (0x04) ==> 0x0014FFFF, Zero, Zero, 0x10
Package (0x04) ==> 0x0014FFFF, One, Zero, 0x11
Package (0x04) ==> 0x0014FFFF, 0x02, Zero, 0x12
Package (0x04) ==> 0x0012FFFF, Zero, Zero, 0x1A
Package (0x04) ==> 0x0012FFFF, One, Zero, 0x25
Package (0x04) ==> 0x0012FFFF, 0x02, Zero, 0x19
Package (0x04) ==> 0x0010FFFF, Zero, Zero, 0x17
Package (0x04) ==> 0x0010FFFF, One, Zero, 0x16
Package (0x04) ==> 0x000DFFFF, Zero, Zero, 0x10
Package (0x04) ==> 0x000DFFFF, One, Zero, 0x11
Package (0x04) ==> 0x000BFFFF, Zero, Zero, 0x10
Package (0x04) ==> 0x0008FFFF, Zero, Zero, 0x10
Package (0x04) ==> 0x0007FFFF, Zero, Zero, 0x10
Package (0x04) ==> 0x0007FFFF, One, Zero, 0x11
Package (0x04) ==> 0x0007FFFF, 0x02, Zero, 0x12
Package (0x04) ==> 0x0007FFFF, 0x03, Zero, 0x13
Package (0x04) ==> 0x0006FFFF, Zero, Zero, 0x10
Package (0x04) ==> 0x0006FFFF, One, Zero, 0x11
Package (0x04) ==> 0x0006FFFF, 0x02, Zero, 0x12
Package (0x04) ==> 0x0006FFFF, 0x03, Zero, 0x13
Package (0x04) ==> 0x0005FFFF, Zero, Zero, 0x10
Package (0x04) ==> 0x0004FFFF, Zero, Zero, 0x10
Package (0x04) ==> 0x0002FFFF, Zero, Zero, 0x10
Package (0x04) ==> 0x0001FFFF, Zero, Zero, 0x10
Package (0x04) ==> 0x0001FFFF, One, Zero, 0x11
Package (0x04) ==> 0x0001FFFF, 0x02, Zero, 0x12
Package (0x04) ==> 0x0001FFFF, 0x03, Zero, 0x13
_PRT after:
Package (0x04) ==> 0x0001FFFF, 0x00, 0x00, 0x00000010
Package (0x04) ==> 0x0002FFFF, 0x00, 0x00, 0x00000011
Package (0x04) ==> 0x0004FFFF, 0x00, 0x00, 0x00000012
Package (0x04) ==> 0x0005FFFF, 0x00, 0x00, 0x00000010
Package (0x04) ==> 0x0006FFFF, 0x00, 0x00, 0x00000010
Package (0x04) ==> 0x0006FFFF, 0x01, 0x00, 0x00000011
Package (0x04) ==> 0x0006FFFF, 0x02, 0x00, 0x00000012
Package (0x04) ==> 0x0007FFFF, 0x00, 0x00, 0x00000013
Package (0x04) ==> 0x0007FFFF, 0x01, 0x00, 0x00000014
Package (0x04) ==> 0x0007FFFF, 0x02, 0x00, 0x00000015
Package (0x04) ==> 0x0007FFFF, 0x03, 0x00, 0x00000016
Package (0x04) ==> 0x0008FFFF, 0x00, 0x00, 0x00000017
Package (0x04) ==> 0x000BFFFF, 0x00, 0x00, 0x00000013
Package (0x04) ==> 0x000DFFFF, 0x00, 0x00, 0x00000014
Package (0x04) ==> 0x000DFFFF, 0x01, 0x00, 0x00000015
Package (0x04) ==> 0x0010FFFF, 0x00, 0x00, 0x00000016
Package (0x04) ==> 0x0010FFFF, 0x01, 0x00, 0x00000017
Package (0x04) ==> 0x0012FFFF, 0x00, 0x00, 0x00000018
Package (0x04) ==> 0x0012FFFF, 0x01, 0x00, 0x00000019
Package (0x04) ==> 0x0012FFFF, 0x02, 0x00, 0x00000011
Package (0x04) ==> 0x0014FFFF, 0x01, 0x00, 0x00000012
Package (0x04) ==> 0x0014FFFF, 0x00, 0x00, 0x0000001A
Package (0x04) ==> 0x0014FFFF, 0x02, 0x00, 0x00000013
Package (0x04) ==> 0x0015FFFF, 0x00, 0x00, 0x0000001B
Package (0x04) ==> 0x0015FFFF, 0x01, 0x00, 0x0000001C
Package (0x04) ==> 0x0015FFFF, 0x02, 0x00, 0x0000001D
Package (0x04) ==> 0x0015FFFF, 0x03, 0x00, 0x0000001E
Package (0x04) ==> 0x0016FFFF, 0x00, 0x00, 0x00000014
Package (0x04) ==> 0x0016FFFF, 0x01, 0x00, 0x00000015
Package (0x04) ==> 0x0016FFFF, 0x02, 0x00, 0x00000016
Package (0x04) ==> 0x0016FFFF, 0x03, 0x00, 0x00000017
Package (0x04) ==> 0x0017FFFF, 0x00, 0x00, 0x00000010
Package (0x04) ==> 0x0019FFFF, 0x00, 0x00, 0x0000001F
Package (0x04) ==> 0x0019FFFF, 0x01, 0x00, 0x00000020
Package (0x04) ==> 0x0019FFFF, 0x02, 0x00, 0x00000021
Package (0x04) ==> 0x001CFFFF, 0x00, 0x00, 0x00000010
Package (0x04) ==> 0x001CFFFF, 0x01, 0x00, 0x00000011
Package (0x04) ==> 0x001CFFFF, 0x02, 0x00, 0x00000012
Package (0x04) ==> 0x001CFFFF, 0x03, 0x00, 0x00000013
Package (0x04) ==> 0x001EFFFF, 0x00, 0x00, 0x00000014
Package (0x04) ==> 0x001EFFFF, 0x01, 0x00, 0x00000015
Package (0x04) ==> 0x001EFFFF, 0x02, 0x00, 0x00000022
Package (0x04) ==> 0x001EFFFF, 0x03, 0x00, 0x00000023
Package (0x04) ==> 0x001FFFFF, 0x01, 0x00, 0x00000017
Package (0x04) ==> 0x001FFFFF, 0x02, 0x00, 0x00000014
Package (0x04) ==> 0x001FFFFF, 0x03, 0x00, 0x00000015
Package (0x04) ==> 0x001FFFFF, 0x00, 0x00, 0x00000016
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I013cd5faab6f425ab1af91fe2a36ac3b8aeef443
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71113
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This change sets DRIVER_TPM_I2C_BUS to the i2c 1 bus for TPM for the
omnigul variant.
BUG=b:263060849
TEST=FW_NAME=omnigul emerge-brya coreboot
Change-Id: I42528d73a4f83bd409cb4a1bd51f2e4e82ee7804
Signed-off-by: jamie_chen <jamie_chen@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71703
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
|
|
To support an RPL SKU on omnigul, omnigul must use the FSP for RPL.
Select SOC_INTEL_RAPTORLAKE for omnigul so that it will use the RPL
FSP headers for omnigul.
BUG=b:263060849
BRANCH=None
TEST=FW_NAME=omnigul emerge-brya intel-rplfsp
coreboot-private-files-baseboard-brya coreboot chromeos-bootimage
Change-Id: If3cfbaeff0472012cb8f30ed8fff3bf5cac23f85
Signed-off-by: jamie_chen <jamie_chen@compal.corp-partner.google.com>
Change-Id: I6a0afb04bea4940e13ea62c2cd0a09500b8b5335
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71702
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Modify NVMe clkreq pin to GPP_D7 from GPP_D6.The design change is for
commonality of GPIO settings. To reserve craask GPIO table and add
craaskneto/craaskino's NVMe GPIO setting. In the change, clkreq# will
be 2 and clksrc is still 1.
BUG=b:259211172
TEST=Verify on reworked craask DUT to boot up from NVMe.
Change-Id: If45c1a87144d5370b1ca2525295fb7947639362f
Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71170
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Although S3 is supported on nissa, only S0ix is used on user devices,
so we can ignore optimising the S3 resume time. Disable the stage
cache to save boot time at the cost on increasing the S3 resume time.
Boot time is reduced by ~6 ms. This is mostly from adding postcar to
the stage cache, which is slow since TSEG is not cached in romstage.
Adding ramstage and FSP-S take negligible time.
The S3 resume time is increased by ~89 ms total from loading and
decompressing ramstage and FSP-S.
Boot time before:
3:after RAM initialization 573,295 (931)
4:end of romstage 583,569 (10,274)
100:start of postcar 587,729 (4,160)
Boot time after:
3:after RAM initialization 571,527 (830)
4:end of romstage 575,712 (4,185)
100:start of postcar 579,866 (4,153)
S3 resume time before:
101:end of postcar 368,904 (0)
10:start of ramstage 369,165 (260)
971:loading FSP-S 385,742 (16,577)
30:device enumeration 407,105 (21,362)
S3 resume time after:
101:end of postcar 363,101 (0)
8:starting to load ramstage 363,101 (0)
15:starting LZMA decompress (ignore for x86) 382,802 (19,701)
16:finished LZMA decompress (ignore for x86) 431,620 (48,817)
9:finished loading ramstage 431,850 (230)
10:start of ramstage 431,927 (76)
971:loading FSP-S 448,357 (16,430)
17:starting LZ4 decompress (ignore for x86) 474,420 (26,062)
18:finished LZ4 decompress (ignore for x86) 474,627 (206)
BUG=b:247940538, b:192032803
TEST=Boot and S3 suspend/resume on craask
Change-Id: I8015dc0808ee19cac67c2a6573d52781c6120e8c
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71677
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
On recent Intel ChromeOS devices, although S3 is still supported, only
S0ix is used on user devices, so we don't care about optimising S3
resume time. Disabing the stage cache saves boot time at the cost of
increasing the S3 resume time. E.g. on nissa this reduces boot time by
6 ms and increases S3 resume time by 89 ms.
BUG=b:247940538, b:192032803
TEST=Build and boot on nissa with MAINBOARD_DISABLE_STAGE_CACHE
selected.
Change-Id: I243a401a112a12bb824c5447a8fecc99500f7739
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71676
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Use CPUID_STRUCT_EXTENDED_FEATURE_FLAGS macro to get extended CPU
capabilities flags using cpuid_ext inline function.
Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com>
Change-Id: If680ffff64e2e1dabded8c03c4042d349a11b635
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71646
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Configure GPIOs based on b/263534907#comment4 from EE.
BUG=b:263534907, b:263216451
BRANCH=None
TEST=FW_NAME=markarth emerge-skyrim coreboot
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Change-Id: I5346a4322a6538d69d3482948166cfb5bd182021
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71635
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Turn on the dxio_tx_vboost_enable for winterhold/whiterun in coreboot.
It needs to confirm the PCIe Signal Integrity after enabled.
BUG=b:259622787
BRANCH=none
TEST=confirm the setting has been set correspondingly with checking
the FSP log.
Signed-off-by: Chris.Wang <chris.wang@amd.corp-partner.google.com>
Change-Id: I6aad3d9118180d2ffdfba38abc80b175b6f103bd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71647
Reviewed-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
|
|
Set fingerprint control GPIO to NC by HW design.
BUG=b:264340020
BRANCH=firmware-brya-14505.B
TEST=emerge-brya coreboot chromeos-bootimage
Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com>
Change-Id: I304862f0dd201da100b89c79a473eb116fc8263e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71650
Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
|
|
Configure CPU PCIe RP and IOM per variant.
Change-Id: I9c38af42206497dbb9436e9f2b8aff46fa4d3fb9
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71558
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
|
|
Change-Id: I885cc00c8bfcfaaabb2ce2b0269172d8d7a88db5
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71583
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Create the omnigul variant of the brya0 reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0).
BUG=b:263060849
BRANCH=None
TEST=util/abuild/abuild -p none -t google/brya -x -a
make sure the build includes GOOGLE_OMNIGUL
Change-Id: I6b4123db9cb77dc050a81f1cb83ef10e2fbffe8d
Signed-off-by: jamie_chen <jamie_chen@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71640
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This reverts commit e45f70423e5da8509bae83aba84b08f8fc0f624e.
Reason for revert: Merged out of order, broke tree
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Change-Id: I38a7be6b94199d3a23e78114fb6708c535f241cc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71279
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
This reverts commit 96d9b756690839c17b307a93b8a1898bd1c02ff5.
Reason for revert: Merged out of order, broke tree
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Change-Id: Iac2d78f2d6c687f52dc720e8d8dcb5cf7a171c9d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71280
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This message is designed to reduce end-user confusion who may not
know what memory training is. It also provides a maximum time
estimation calibrated for brya devices.
BUG=b:252792591
BRANCH=firmware-brya-14505.B
TEST=New message observed on skolas
Change-Id: Ie71cd86746427789b3694d41224bf2c170af0f91
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70796
Reviewed-by: Anil Kumar K <anil.kumar.k@intel.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:252792591
BRANCH=firmware-brya-14505.B
TEST=On-screen text message seen during MRC training on skolas
with a few extra patches
Change-Id: I41c9cccb09dea52e2318f8f9ebeeda3697a7b513
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70304
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
BUG=none
TEST=Build and boot to google/taniks. Check dmesg and make sure that
there is no regression.
Also confirm that there is no change in ACPI _PRT and IO-APCI interrupt
assignment.
IO-APIC interrupts before and after this patch:
1: IO-APIC 1-edge i8042
8: IO-APIC 8-edge rtc0
9: IO-APIC 9-fasteoi acpi
14: IO-APIC 14-fasteoi INTC1055:00
23: IO-APIC 23-fasteoi idma64.5, ttyS0
37: IO-APIC 37-fasteoi idma64.0, i2c_designware.0
38: IO-APIC 38-fasteoi idma64.1, i2c_designware.1
40: IO-APIC 40-fasteoi idma64.2, i2c_designware.2
41: IO-APIC 41-fasteoi idma64.3, i2c_designware.3
42: IO-APIC 42-fasteoi idma64.4, i2c_designware.4
45: IO-APIC 45-fasteoi idma64.6, pxa2xx-spi.6
77: IO-APIC 77-edge cr50_i2c
100: IO-APIC 100-fasteoi ELAN0000:00
103: IO-APIC 103-fasteoi chromeos-ec
_PRT before and after this patch:
Package (0x04) ==> 0x0001FFFF, 0x00, 0x00, 0x00000010
Package (0x04) ==> 0x0002FFFF, 0x00, 0x00, 0x00000011
Package (0x04) ==> 0x0004FFFF, 0x00, 0x00, 0x00000012
Package (0x04) ==> 0x0005FFFF, 0x00, 0x00, 0x00000010
Package (0x04) ==> 0x0006FFFF, 0x00, 0x00, 0x00000010
Package (0x04) ==> 0x0006FFFF, 0x02, 0x00, 0x00000012
Package (0x04) ==> 0x0007FFFF, 0x00, 0x00, 0x00000013
Package (0x04) ==> 0x0007FFFF, 0x01, 0x00, 0x00000014
Package (0x04) ==> 0x0007FFFF, 0x02, 0x00, 0x00000015
Package (0x04) ==> 0x0007FFFF, 0x03, 0x00, 0x00000016
Package (0x04) ==> 0x0008FFFF, 0x00, 0x00, 0x00000017
Package (0x04) ==> 0x000DFFFF, 0x00, 0x00, 0x00000011
Package (0x04) ==> 0x000DFFFF, 0x01, 0x00, 0x00000013
Package (0x04) ==> 0x0010FFFF, 0x00, 0x00, 0x00000018
Package (0x04) ==> 0x0010FFFF, 0x01, 0x00, 0x00000019
Package (0x04) ==> 0x0010FFFF, 0x02, 0x00, 0x00000014
Package (0x04) ==> 0x0010FFFF, 0x03, 0x00, 0x00000015
Package (0x04) ==> 0x0011FFFF, 0x00, 0x00, 0x0000001A
Package (0x04) ==> 0x0011FFFF, 0x01, 0x00, 0x0000001B
Package (0x04) ==> 0x0011FFFF, 0x02, 0x00, 0x0000001C
Package (0x04) ==> 0x0011FFFF, 0x03, 0x00, 0x0000001D
Package (0x04) ==> 0x0012FFFF, 0x00, 0x00, 0x0000001E
Package (0x04) ==> 0x0012FFFF, 0x01, 0x00, 0x0000001F
Package (0x04) ==> 0x0012FFFF, 0x02, 0x00, 0x00000016
Package (0x04) ==> 0x0013FFFF, 0x00, 0x00, 0x00000020
Package (0x04) ==> 0x0013FFFF, 0x01, 0x00, 0x00000021
Package (0x04) ==> 0x0013FFFF, 0x02, 0x00, 0x00000022
Package (0x04) ==> 0x0013FFFF, 0x03, 0x00, 0x00000023
Package (0x04) ==> 0x0014FFFF, 0x01, 0x00, 0x00000017
Package (0x04) ==> 0x0014FFFF, 0x00, 0x00, 0x00000024
Package (0x04) ==> 0x0014FFFF, 0x02, 0x00, 0x00000011
Package (0x04) ==> 0x0015FFFF, 0x00, 0x00, 0x00000025
Package (0x04) ==> 0x0015FFFF, 0x01, 0x00, 0x00000026
Package (0x04) ==> 0x0015FFFF, 0x02, 0x00, 0x00000027
Package (0x04) ==> 0x0015FFFF, 0x03, 0x00, 0x00000028
Package (0x04) ==> 0x0016FFFF, 0x00, 0x00, 0x00000012
Package (0x04) ==> 0x0016FFFF, 0x01, 0x00, 0x00000013
Package (0x04) ==> 0x0016FFFF, 0x02, 0x00, 0x00000014
Package (0x04) ==> 0x0016FFFF, 0x03, 0x00, 0x00000015
Package (0x04) ==> 0x0017FFFF, 0x00, 0x00, 0x00000016
Package (0x04) ==> 0x0019FFFF, 0x00, 0x00, 0x00000029
Package (0x04) ==> 0x0019FFFF, 0x01, 0x00, 0x0000002A
Package (0x04) ==> 0x0019FFFF, 0x02, 0x00, 0x0000002B
Package (0x04) ==> 0x001CFFFF, 0x00, 0x00, 0x00000010
Package (0x04) ==> 0x001CFFFF, 0x01, 0x00, 0x00000011
Package (0x04) ==> 0x001CFFFF, 0x02, 0x00, 0x00000012
Package (0x04) ==> 0x001CFFFF, 0x03, 0x00, 0x00000013
Package (0x04) ==> 0x001DFFFF, 0x00, 0x00, 0x00000010
Package (0x04) ==> 0x001DFFFF, 0x01, 0x00, 0x00000011
Package (0x04) ==> 0x001DFFFF, 0x02, 0x00, 0x00000012
Package (0x04) ==> 0x001DFFFF, 0x03, 0x00, 0x00000013
Package (0x04) ==> 0x001EFFFF, 0x00, 0x00, 0x00000017
Package (0x04) ==> 0x001EFFFF, 0x01, 0x00, 0x00000014
Package (0x04) ==> 0x001EFFFF, 0x02, 0x00, 0x0000002C
Package (0x04) ==> 0x001EFFFF, 0x03, 0x00, 0x0000002D
Package (0x04) ==> 0x001FFFFF, 0x01, 0x00, 0x00000016
Package (0x04) ==> 0x001FFFFF, 0x02, 0x00, 0x00000017
Package (0x04) ==> 0x001FFFFF, 0x03, 0x00, 0x00000014
Package (0x04) ==> 0x001FFFFF, 0x00, 0x00, 0x00000015
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: Ib4fc850228b7ddbf84e2feb2433adff5e4002033
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71236
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Move specific enum ddr3_module_type to <device/dram/ddr3.h>.
Change-Id: I8fd7892dda26158a5bdd6cd4972c7859a252153e
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71547
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch will enable Kconfig SOC_INTEL_CSE_LITE_SKU option required
to enable CSE-Lite SKU for MTL-RVP. On enabling the respective Kconfig
option, CSE reboots the system into CSE_RW FW region on cold reboot.
BUG=b:224325352
TEST=Able to boot intel/mtlrvp to ChromeOS and also able to observe
CSE boot to RW FW region as part of coreboot console log,
localhost ~ # cbmem -c | grep cse
[DEBUG] cse_lite: Number of partitions = 3
[DEBUG] cse_lite: Current partition = RW
[DEBUG] cse_lite: Next partition = RW
Signed-off-by: Harsha B R <harsha.b.r@intel.com>
Change-Id: I325405cc304d245871396317c11ac7a5b062a5bd
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71638
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Icecef272bd4cd2a204c903783787bbec751fe9e5
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71613
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Move specific enum ddr2_module_type to <device/dram/ddr2.h>.
Change-Id: I748658f9b349bff9b1ebe2c0a6acf71bf2a221ce
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71546
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: Ib1bf132f248d1f3c42d32f884f09687964a0c6f2
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71584
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Add the UPD dxio_tx_vboost_enable for PCIe optimization.
It will impact the PCIe signal integrity, need to double-confirm
the SI result after enabling this setting.
BUG=b:259622787
BRANCH=none
TEST=confirm the setting has been set correspondingly with checking
the FSP log.
Signed-off-by: Chris.Wang <chris.wang@amd.corp-partner.google.com>
Change-Id: I05ae5b3091219e0cb1fe469c929fad6a725db678
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71562
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add new memory parts in the mem_parts_used.txt and generate the
SPD ID for the parts. The memory parts being added are:
DRAM Part Name ID to assign
K3KL8L80CM-MGCT 0 (0000)
H58G56BK7BX068 0 (0000)
K3KL9L90CM-MGCT 1 (0001)
H58G66BK7BX067 1 (0001)
MT62F2G32D4DS-026 WT:B 1 (0001)
BUG=b:263296326, b:263216451
BRANCH=None
TEST=FW_NAME=markarth emerge-skyrim coreboot
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Change-Id: I4f00d444bd59443ecba29c6c155d676bab7a3d82
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71632
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Chao Gui <chaogui@google.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Create the markarth variant of the skyrim reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0.)
BUG=b:262092858
BRANCH=None
TEST=util/abuild/abuild -p none -t google/skyrim -x -a
make sure the build includes GOOGLE_MARKARTH
Change-Id: Ifbace841ca56d8659aaffdc31fb2bc4367d96f82
Signed-off-by: Chao Gui <chaogui@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71610
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
|
|
In next phase, yaviks will remove external fivr. Use the board version
to config external fivr for backward compatibility and show message.
BUG=b:263842258
TEST=build, boot to OS, suspend/resume work normally.
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Change-Id: Id85570046c5b8e9d90a112793c1ec8604e6bf533
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71560
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
This patch configures GPP_H15 (EN_DMIC_SOC_DATA) as GPO and put into
safe state aka LOW/PD.
BUG=b:263411621
TEST=Able to build and boot Google, Rex to ChromeOS.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I3d376f895b2f0882c9fa6fe7b98686907bde4321
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71631
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=none
TEST=Verify presence of subsystem ID for fast_spi device on google/rex.
lspci output before this patch:
00:1f.5 Serial bus controller [0c80]: Intel Corporation Device [8086:7e23]
lspci output after this patch:
00:1f.5 Serial bus controller [0c80]: Intel Corporation Device [8086:7e23]
Subsystem: Intel Corporation Device [8086:7e23]
Note: UPD SiSkipSsidProgramming was set to 1 for above test.
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I08c7a5a3fdc7389b315e85180c16d1ec335fbba2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71275
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Add is_keylocker_supported() API in common cpulib.
This function checks if the CPU supports Key Locker feature.
Returns true if Key Locker feature is supported otherwise false.
Change-Id: Ide9e59a4f11a63df48838eab02c2c584cced12e1
Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71117
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Select SOC_INTEL_RAPTORLAKE to force coreboot to use the RPL FSP headers
for FSP.
Since we use RPL FSP and it will support ADL as well, we rename
"Gaelin4ADL" to "Gaelin".
BUG=b:258603624
BRANCH=firmware-brya-14505.B
TEST=emerge-brask coreboot
Cq-Depend: chrome-internal:5227091, chromium:4113361
Change-Id: Ie7349f3670aeec166228e7df55300cd30d0ca16c
Signed-off-by: Mike Shih <mikeshih@msi.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70746
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Adjust audio codec i2c timing to 399 kHz.
BUG=b:263050944
TEST=FW_NAME=lisbon emerge-brask coreboot
Signed-off-by: Kevin Chiu <kevin.chiu.17802@gmail.com>
Change-Id: I8495a88f2034e5e4ccf28ff53c81e0d6561e2e0f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70898
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ricky Chang <rickytlchang@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
winterhold/whiterun has different H/W topology to skyrim that the eMMC device
is on a different GPP:
skyrim: GPP1 -> SD
winterhold : GPP1 -> eMMC
BUG=b:263763288
BRANCH=none
TEST=s0i3 stress over 2500 cycles.
Signed-off-by: Chris.Wang <chris.wang@amd.corp-partner.google.com>
Change-Id: Ie6af4287057c6befa0b787ac28d7898166401b29
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71277
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Fix:
CC romstage/mainboard/amd/pademelon/static.o
cc1: error: src/vendorcode/amd/pi/00670F00/Lib: No such file or directory [-Werror=missing-include-dirs]
CC romstage/mainboard/amd/gardenia/static.o
cc1: error: src/vendorcode/amd/pi/00670F00/Lib: No such file or directory [-Werror=missing-include-dirs]
CC romstage/mainboard/google/kahlee/static.o
cc1: error: src/vendorcode/amd/pi/00670F00/Lib: No such file or directory [-Werror=missing-include-dirs]
CC romstage/mainboard/google/kahlee/static.o
cc1: error: src/vendorcode/amd/pi/00670F00/Lib: No such file or directory [-Werror=missing-include-dirs]
Change-Id: I038f87f564ed0415035d92bf0d79a9f8ae2227a4
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71597
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
directories
Found using 'Wmissing-include-dirs' command option.
Fix:
cc1: error: ../../src/soc/amd/cezanne/psp_verstage/include: No such file or directory [-Werror=missing-include-dirs]
Change-Id: I36022a031cc08d2af8b982522b3d6652e679bf14
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71588
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
directories
Found using 'Wmissing-include-dirs' command option.
Fix:
cc1: error: ../../src/soc/amd/picasso/psp_verstage/include: No such file or directory [-Werror=missing-include-dirs]
Change-Id: I7713eef54686c58a83215c461c3274cec89e32b0
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71587
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
directory
Found using 'Wmissing-include-dirs' command option.
Fix:
cc1: error: ../../src/soc/amd/mendocino/psp_verstage/include: No such file or directory [-Werror=missing-include-dirs]
Change-Id: I1cc084abc7a9bfed760350f304dd074081a7eebf
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71586
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
For some reason, the Windows LPEA drivers won't attach without
_HRV (hardware version) defined for the GPIO controllers.
Add it, using value taken from Intel baytrail/valleyview edk2
reference code.
TEST=boot Windows 10/11 on google/rambi, verify LPEA drivers load
properly.
Change-Id: Iaa6e1b3f68537e012e4a58175d5334a8aa2f4178
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71200
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
For some reason, the Windows i2c drivers won't attach without
_HRV (hardware version) defined for the i2c controllers.
Add it, using value taken from Intel baytrail/valleyview edk2
reference code.
TEST=boot Windows 10/11 on google/rambi, verify i2c drivers load
properly.
Change-Id: I590acd1f1b75f6bf2bf278e67eec1dcc24bcc15d
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71199
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Coolstar's Windows drivers don't utilize it, and the Linux drivers
don't care about _STA, so hide it from Windows to tidy up Device
Manager.
Change-Id: I2eb4b3aeed50b9f3ee9f73a57d6585068aa31fbb
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71198
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change the IRQ triggering from edge to level for cypress touchpad
on peppy variant for compatibility with Windows drivers.
TEST=boot Linux 5.x/6.x, Windows 10/11 on peppy, verify touchpad
functional.
Change-Id: Iecf6cb919bf16ec9180ca050e7eafe55247337ed
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71197
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: Idda0a8330463205efe5ec5faa82a1f458894e521
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70574
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Now that power sequencing has been implemented, switch from using ACPI
"probed" flag to "detect" flag for all i2c touchscreens. This removes
non-present devices from the SSDT and relieves the OS of the burden of
probing.
BUG=b:121309055
TEST=build/boot Windows/linux on drallion, verify touchscreen functional
in OS, dump ACPI and verify only i2c devices actually present on the
board have entries in the SSDT.
Change-Id: I67c3d1fc3d34e9b67ddb26afcaad3a47ffa92e2f
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71193
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The GPIOs themselves are configured as level triggered, and the drivers
(both Linux and Windows) work better with LEVEL vs EDGE triggering.
TEST=tested with rest of patch train
Change-Id: I1bdbf017bc7480f59cec85c70d6e71dac294dcd2
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71192
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
For touchscreens on drallion, drive the enable GPIO high starting in
romstage while holding in reset, then disable the reset GPIO in
ramstage. This will allow coreboot to detect the presence of i2c
touchscreens during ACPI SSDT generation (implemented in a subsequent
commit).
BUG=b:121309055
TEST=tested with rest of patch train
Change-Id: I6825345f35a7415020e77edf781139f0c9b5f875
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71191
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Add method variant_romstage_gpio_table() with empty implementation to
be used in a subsequent commit for touchscreen power sequencing.
Call method in romstage to program any GPIOs that may need to be set.
TEST=tested with rest of patch train
Change-Id: I0ad0c18a8b61e59a943a453882bf74762bac4700
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71190
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: If94037f2b010527440795e6920dd7a533c52f606
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70575
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
