| Age | Commit message (Collapse) | Author |
|---|
|
This reverts commit 1a0071c7115819302c7df3fa2c07b1ca971e515d.
Reason for revert:
UART pad configuration should not be done in common code, since it
could cause short circuits if the user configures a wrong UART index.
Change-Id: I6022935eaab748f82c6330be0729ff72f4880493
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48328
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
Add enable acp_i2s_use_external_48mhz_osc flag and then
WWAN sku will use external clock source at next build.
BUG=b:174121847
BRANCH=zork
TEST=build vilboz and check MISC_CLK_CNTL1.
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Change-Id: Ida747938373f648524b1e7f34bc69e372a69c4f9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48556
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com>
Change-Id: I2c6ffe885717997540a0a9721310e355a3b6a87d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44704
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Reference datasheet:
External Memory Interface (EMI).pdf, Document No: RH-A-2020-0055.
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com>
Change-Id: I3b778698a09c999252fef3153ac1e869ea9d90cd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44703
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
Memory PLL is used to provide the basic clock for dram controller
and DDRPHY. PLL must be initialized as predefined way.
First, enable PLL POWER and ISO, wait at least 30us, release ISO, then
configure PLL frequency and enable PLL master switch.
At last, enable control ability for SPM to switch between active and
idle when system is switched between normal and low power mode.
TEST=Confirm Memory PLL frequency is right by frequency meter
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com>
Change-Id: Ieb4e6cbf19da53d653872b166d3191c7b010dca6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44702
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
|
|
Use the common block ACPI to further reduce the duplicate code.
Change-Id: If28d75cbb2a88363d70e3ae6a2cace46cb6bbbab
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48248
Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This reverts commit ccceb2250eeb820fccfb62d1f3ab407582d2e79f.
Reason for revert:
UART pad configuration should not be done in common code, since it
could cause short circuits if the user configures a wrong UART index.
Change-Id: Idc268debc60a027ed2f5a76e0de8ea2d1cde0fc4
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48327
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
Test results show that USB signals look better with these settings.
Yes, there's a macro in the devicetree now. All ports use the same
settings except for the overcurrent pin, so this avoids redundancy.
Change-Id: Ib0dafab88d8dcc05388b724f6a7183c13ac64934
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48694
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add devicetree configuration for G2TOUCH Touchscreen controller.
BUG=b:175513059
BRANCH=octopus
TEST=build bios, check i2c bus and verify touch screen works fine
Change-Id: Ib57597c4998f205c664e13befb4c44532b7dbd4f
Signed-off-by: rasheed.hsueh <rasheed.hsueh@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48552
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
The latest version defined by TCG is 1.3.
Change-Id: Idb12e2212d6d38c720c8fe989678724c871af6ef
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45569
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Implement the ACPI PPI interface as described in
"TCG PC Client Physical Presence Interface Specification" Version 1.3.
Add a new Kconfig that allows to use the full PPI instead of the stub
version compiled in.
This doesn't add code to execute the PPI request, as that's up to the
payload with graphical UI support.
Tested on GNU/Linux 5.6 using the sysfs interface at:
/sys/class/tpm/tpm0/ppi/
Change-Id: Ifffe1d9b715e2c37568e1b009e86c298025c89ac
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45568
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add supported memory parts in the mem_parts_used.txt and generate the
SPD ID for the memory parts. The memory parts being added are:
MT53E512M32D2NP-046 WT:E
H9HCNNNBKMMLXR-NEE
MT53E1G32D2NP-046 WT:A
H9HCNNNCPMMLXR-NEE
BUG=None
TEST=Build the storo board.
Signed-off-by: Tao Xia <xiatao5@huaqin.corp-partner.google.com>
Change-Id: Ifd935865927bb9fccf95eb4924ca6986d0c19442
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48447
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Xuxin Xiong <xuxinxiong@huaqin.corp-partner.google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Update devicetree and gpio driving of boten that enable stylus
PEN detect signal is not dual-routed on Boten. Since the gpio_keys kernel
driver expects the pad to be owned by GPIO controller (i.e. configured for
GPIO IRQ), it cannot be configured for ACPI (i.e. SCI).
Thus, this change updates the GPIO configuration for GPP_C12 to
PAD_CFG_GPI_GPIO_DRIVER and device tree entry for PENH device to
use WAKEUP_ROUTE_GPIO_IRQ. Additionally, the signal is marked as active
low in the device tree entry to indicate to the kernel driver that the signal
is inverted.
Not dual routing the signal results in wake source not being added to
eventlog when pen removal results in wake from S0ix.
BUG=b:160752604
BRANCH=dedede
TEST=Build and check behavior is expected.
Signed-off-by: rasheed.hsueh <rasheed.hsueh@lcfc.corp-partner.google.com>
Change-Id: I74a17088da64c22ef1c74d201c80274fc65a44c9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48641
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Don't depend on the MTRR setup left over from FSP-M ExitTempRam.
Change-Id: I299123b3cd3c37b4345102c20fda77bf261892a2
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48673
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
|
|
Change-Id: I42ddea2c04bf1ecb2466db3d56d15d51bda486c8
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48660
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
|
|
Change-Id: I75f83bcc6c65a048e87f7295a66526eb384afc5d
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48692
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This patch adds initial support for Alderlake Intel Pre-CEP
board called shadowmountain.
BUG=b:175808146
TEST=util/abuild/abuild -p none -t intel/shadowmountain -a -c max
Change-Id: I9cb650c88986badd6733b001d6f2a0e338421829
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48685
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Enable Runtime D3 for the volteer variants that have GPIO power control
of the NVMe device attached to PCIe Root Port 9.
Enable the GPIO for power control for variants that do not already have
it configured to allow the power to be disabled in D3 state.
BUG=b:161270810
TEST=tested on eldrid
Signed-off-by: Nick Chen <nick_xr_chen@wistron.corp-partner.google.com>
Change-Id: I941c8a9bb3221ad90528c323cd0f267dc77d2af3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48687
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Add a hook for SOCs to provide an IOAPIC MADT table. If the
SOC doesn't provide a table then a standard setting is used.
Change-Id: Ic818a634e4912d88ef93971deb4da5ab708c9020
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48246
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Add UPDs for eDP phy tunning adjust
BUG=b:171269338
BRANCH=zork
TEST=Build, verify the parameter pass to picasso-fsp
Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com>
Change-Id: I6df063f828447841ac9a6dba00a4aad2001f04df
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48731
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
|
|
Change static calculate_power() function to global and update the name
to common_calculate_power_ratio() for SOC ACPI code use.
Change-Id: I0e2d118ad52b36859bfc6029b7dee946193841f4
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48739
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com>
|
|
When a different FSP binary was chosen in menuconfig, the split fd files
do not get updated. Thus, make them depend on `.config` to trigger a
rebuild when the config changes.
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Change-Id: I54739eae50fa1a47bf8f3fe2e79334bc7f7ac3d6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48663
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Falling back to default values for Imon slope and offset for Drawcia
This is as per recommendation from ODM based on calibration
This reverts commit 2ac88f2347352c5dff0af18d5130dbdd6f032930.
BUG=b:175629526
BRANCH=dedede
TEST=Debug FSP confirms that values are reverted to default
Change-Id: I605acdcd0de2c5dfc28af2aea8cefc6b629c0925
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48737
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Vidya Gopalakrishnan <vidya.gopalakrishnan@intel.corp-partner.google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add support for gpio driver for galtic
BUG=b:170913840
BRANCH=dedede
TEST=emerge-dedede coreboot
Signed-off-by: FrankChu <frank_chu@pegatron.corp-partner.google.com>
Change-Id: I01bb95545705efab1a2adf1582b6293fd89e6420
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48684
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable Acoustic noise mitigation for madoo and set slew rate to 1/8
which is calibrated value for the board. Other values like PreWake,
Rampup and RampDown are 0 by default.
BUG=b:173765599
BRANCH=dedede
TEST=Correct value is passed to UPD and Acoustic noise test passes.
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Change-Id: I968d8d43016e3569835b0a777335fa1d5c135f87
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48721
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
galtic memory table as follow:
value Vendor Part number
0x00 MICRON MT53E512M32D2NP-046 WT:E
0x00 HYNIX H9HCNNNBKMMLXR-NEE
0x01 MICRON MT53E1G32D2NP-046 WT:A
0x02 HYNIX H9HCNNNCPMMLXR-NEE
BUG=b:170913840
BRANCH=none
TEST=emerge-dedede coreboot
Signed-off-by: FrankChu <frank_chu@pegatron.corp-partner.google.com>
Change-Id: I30b8fe3f14e1af7bb5760530477f9311c6a4ee62
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48655
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
gumboz is the dalboz/dirinboz follower.
update gumboz variant to align dirinboz settings.
BUG=b:174277853,b:173662179
BRANCH=zork
TEST=emerge-zork coreboot
Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com>
Change-Id: I80c03d531761c02b68bd127d889c3ace2dd9e99e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48642
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
UART pads already get configured in bootblock by the UART driver in soc
code. Thus, drop the duplicated code from the mainboard.
Change-Id: I95565a74e19d693a7d5ead81e72592cc4ca2038c
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48594
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
UART pads already get configured in bootblock by the UART driver in soc
code. Thus, drop the duplicated code from the mainboard.
Tested successfully on Clevo L141CU.
Change-Id: I05a459b0af79c75c31b1bb26ea1a1a40857ef9bf
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48593
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Move sb_clk_output_48Mhz out of acp. It should be called unconditionally.
We may have another device need this clock e.g. superio chip.
BUG=b:174121847
BRANCH=zork
TEST= build passed
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I30ad6c60066f17cc83e7feb40675610f4853a022
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48722
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
If we have use external clock source for I2S, we don't need to enable
internal one. Add acp_i2s_use_external_48mhz_osc flag for the project
which uses external clock source.
BUG=b:174121847
BRANCH=zork
TEST= build passed
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: Ica68ee2da5a05231eb6db0218bd0f19907507273
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48637
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This still uses the common GPIO code that supports setting up SMI/SCI
support for the GPIOs in all stages, which will get removed in future
patches, so for now the SoC's gpio.c needs to be included in all stages.
Change-Id: I6c12d1d6c605b7eb063eef62a1f71860f602f8dd
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48565
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I83b9a91cbab297d032292997a4d5768b89fe97dd
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48645
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
List of changes:
FSP-S Header:
- Adjust UPD Offset for Reservedxx
- Rename UPD Offset UnusedUpdSpace44 -> UnusedUpdSpace45
Change-Id: If0c18cbb556fc41786391464b76d7c9cc19eab0d
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48695
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Also tidy up some adjacent comments.
Change-Id: I2e881900a52e42ab3f43ffe96cfbdcc63ff02e23
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48358
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
The `azalia_set_bits` will mask out all bits, so just use zero for
clarity. The resulting behavior is the same in both cases.
Change-Id: I27777f1e836fa973859629d48964060bec02c87a
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48357
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
coreboot already unconditionally enables CLKRUN_EN in SoC common code.
Tested on an out-of-tree Acer Aspire VN7-572G, PCCTL[CLKRUN_EN]
of LPC is still enabled.
Change-Id: I65e85015bdd0f766ca8021a3d4c0b0d799f0ccc5
Signed-off-by: Benjamin Doron <benjamin.doron00@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48325
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I67930267a89ba0c64ec7e40e2bfa30a0618d104b
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48564
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Change-Id: I346040eb6531dac6c066a96cd73033aa17f026d0
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48356
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
Many uses of `azalia_set_bits` are used to toggle the reset bit. To
avoid having to repeat the register operations and the corresponding
comment, create two helpers with self-explanatory names. They will be
put to use in subsequent commits, with one change for each function.
Change-Id: If0594fdaf99319f08a2e272cd37958f0f216e654
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48355
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
The `4` here doesn't have to do with the size of u32. Instead, it is
because the verb header contains the number of jacks, which is the
number of four-verb groups.
Change-Id: I3956ce5ec2a7abc29982504cf75b262a1c098af5
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48352
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
This function is equivalent to `azalia_find_verb` in its current form,
so replace them. Also, adapt and move the function description comment.
Change-Id: I40d1e634c31b00bd7808a651990d9bd6f0d054e9
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48351
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Allow to specify which table should the verb list be read from.
Change-Id: Id1bc40c4364cda848f416bad9eeab1b8ca3e9512
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48350
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
The `dev` parameter isn't used anywhere.
Change-Id: I05643f8201137ffe89ded1e3f989c5a0f04e0af1
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48349
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
To allow dropping copies of this function, make it non-static. Also,
rename it to `azalia_find_verb` as the function is now globally visible.
Finally, replace the copies in chipset code with `azalia_find_verb`.
Change-Id: Ie66323b2c62139e86d3d7e003f6653a3def7b5f2
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48348
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
The other five copies of this function in the tree do not have these
debug prints. Remove them from here for consistency. Note that this
information is already printed elsewhere, so nothing is being lost.
Change-Id: I999032af1628bf8d66a057dc72368f02ef6eb8d1
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48347
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
There's many copies of this function in the tree. Make the copy in
azalia_device.c non-static and rename it to `azalia_set_bits`, then
replace all other copies with it. Since azalia_device.c is only built
when AZALIA_PLUGIN_SUPPORT is selected, select it where necessary.
This has the side-effect of building hda_verb.c from the mainboard
directory. If this patch happens to break audio on a mainboard, it's
because its hda_verb.c was always wrong but wasn't being compiled.
Change-Id: Iff3520131ec7bc8554612969e3a2fe9cdbc9305e
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48346
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
One of the variants lacks an hda_verb.h, and hda_verb.c can't be built.
Follow-up changes will make mainboard hda_verb.c files always get built
through AZALIA_PLUGIN_SUPPORT, and breaks building this contraption.
Turn the headers into standalone compilation units to prevent this
issue. Since they contain definitions, including them from multiple
compilation units wasn't a good idea anyway.
Change-Id: I00d968563539a4e1b8d1e12145293439d8358555
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48360
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
from AMD USB phy specialist recommended that TXVREFTUNE0 shouldn't over 0xD (the maximum)
in order to have enough room to accomdate a safe disconnect threshhold in COMPDISTUNE0.
TXVREFTUNE0: 0xf -> 0xd
BUG=b:172687208
BRANCH=zork
TEST=emerge-zork coreboot
Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com>
Change-Id: Ia104454d95e5e8d6a212c97fb09d61125945eeea
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48653
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
For arch/arm[64], the offsets to board identification strings and
CONFIG_ROM_SIZE inside .id were never really used; it was only a
convenience to have the strings appear near the start of image.
Add the same strings in an uncompressed file in CBFS.
Change-Id: I35d3312336e9c66d657d2ca619cf30fd79e18fd4
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47602
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The strings in .id are expected to match the build for
the purpose of identifying the binary image. There is
no identified use for the offsets.
The files id.ld and prologue.inc were unused.
Change-Id: Ida332671e0ace3f6afd11020474ffda04614bad5
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47966
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
The location is hardcoded inside flashrom and FILO.
Only two offsets are supported, 0x10 and 0x80.
Change-Id: I8348f2ac0cab969ab78ecb50a55de486eee0cf9b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47598
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change enables PCIEXP_HOTPLUG to support resource allocation for
TCSS TBT/USB4 ports.
Referred from TGLRVP -> https://review.coreboot.org/c/coreboot/+/41543
Change-Id: I5f883dac0d7e5fa84ad2e1683f84c933a90cea51
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48619
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
Guybrush is a new Google mainboard with an AMD SOC.
BUG=b:175143925
TEST=builds
Change-Id: I1792f21ff7616f364ddc8b0c04481049b2a5fb04
Signed-off-by: Mathew King <mathewk@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48479
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use FSPS_UPD instead of FSP_S_CONFIG as argument as already done on
xeon_sp and denverton_ns. This allows to set test config UPDs from
mainboard code as well.
Change-Id: I6d67264e22df32b9210ce88b99d6a7a4f6b97ffb
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48644
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Currently it's not possible to add multiple graphics driver into
one coreboot image. This patch series will fix this issue by providing
a single API that multiple graphics driver can use.
This is required for platforms that have two graphic cards, but
different graphic drivers, like Intel+Aspeed on server platforms or
Intel+Nvidia on consumer notebooks.
The goal is to remove duplicated fill_fb_framebuffer(), the advertisment
of multiple indepent framebuffers in coreboot tables, and better
runtime/build time graphic configuration options.
Replace set_vbe_mode_info_valid with fb_add_framebuffer_info or
fb_new_framebuffer_info_from_edid.
Change-Id: I95d1d62385a201c68c6c2527c023ad2292a235c5
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39004
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
1. AGPIO5 to NC
2. EGPIO141 to NC
3. EGPIO144 to NC
BUG=b:174528384
BRANCH=zork
TEST=emerge-zork coreboot
Signed-off-by: Kane Chen <kane_chen@pegatron.corp-partner.google.com>
Change-Id: I51f291476e01982e1a3f92cd1b338a528434112d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48002
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I8c9eed5d0e320b02382c24304a44e51e89eb6ac5
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48633
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
On SKX FSP-M does not return if this is set too early.
Tested on OCP/Tiogapass, boots.
Change-Id: Ib8ef7bab36bfd4b62988768753d10b4d7b7d567f
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48657
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This fixes ocp/tiagopass not booting as after FSP-S the P2SB is
accessed to read out or reconfigure the HPET and PCH IOAPIC BDF.
Change-Id: Ia37bd0f14627980345cd07f20e935a10d4760b69
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48654
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The local function names were chosen such that they don't
collide with <gpio.h> so the prefix is unnecessary.
Change-Id: I4799a6d6b87e8081324d88b0773e61cbda0d4cfb
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48635
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com>
Change-Id: I7bc1971646a65db8eef5eb5223c919645c6e8ed9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44701
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Followup work forces gdtptr and gdt towards the top of
bootblock. They need to be realmode-addressable, i.e.
within top 64 KiB or same segment with .reset.
Change-Id: Ib6f23b2808d0a7e0d277d00a9b0f30c49fdefdd5
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47965
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Change-Id: Icc70adb0c3527a082622fd0ab70888e6cdf6b0ed
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46982
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
We have identical gdtptr16 and gdtptr. The reference in
gdtptr_offset calculation is not accounted for when
considering --gc-sections, so to support linking
gdt_init.S separately add dummy use of gdtptr symbol.
Realmode execution already accessed gdt that was located
outside [_start16bit,_estart16bit] region. Remove latter
symbol as the former was not really a start of region,
but entry point symbol.
With the romcc bootblock solution, entry32.inc may have
been linked into romstage before, but the !ENV_BOOTBLOCK
case seems obsolete now.
Change-Id: I0a3f6aeb217ca4e38b936b8c9ec8b0b69732cbb9
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47964
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Add wifi sar for magolor and maglia:
Using tablet mode of fw config to decide to load custom wifi sar or not.
same wifi sar value for magolor and maglia (shared firmware)
BUG=b:173001370, b:173001251
TEST=enable CHROMEOS_WIFI_SAR in config of coreboot,
emerge-dedede coreboot-private-files-baseboard-dedede coreboot chromeos-bootimage.
Cq-Depend: chrome-internal:3453724
Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Change-Id: I44ab68c9ee5deced90d3858161571ab4b39b4c8a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48448
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change adds memory part used by variant sasuke to
mem_part_used.txt and generates DRAM ID allocated to the part.
BUG=b:172104731
Change-Id: Ie8d66261cb5b4493afb1c677839f807bca994af5
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48451
Reviewed-by: Raymond Chung <raymondchung@ami.corp-partner.google.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The voltage of vm18 should be microvolt instead of millivolt.
BUG=b:155253454
BRANCH=none
TEST=boot asurada correctly
Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
Change-Id: Iea5b46c1df358dc350506d29cc033d01631b37b0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48110
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Keep the CONN MCU in reset state to prevent CONN from asserting the
clk26m request to SPM.
TEST=clk26m request from conn has been released.
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Change-Id: Ia1b706da497ba2827341051459c3628e2ae9240f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46447
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Newer kernels can re-schedule new acpi command calls during a Sleep().
This causes that the following trace fails to detect the cameras:
[ 15.764725] drivers/acpi/power.c:358 Power resource [OVFI] turned on start
[ 15.772180] drivers/acpi/power.c:358 Power resource [OVTH] turned on start
[ 15.834970] drivers/acpi/power.c:362 Power resource [OVFI] turned on start
[ 15.852456] drivers/acpi/power.c:415 Power resource [OVFI] turned off start
[ 15.955987] drivers/acpi/power.c:420 Power resource [OVFI] turned off end
ERROR!!
[ 16.030896] drivers/acpi/power.c:362 Power resource [OVTH] turned on end
Which can be triggered more frequently if the Sleep() commands in OVTH
_ON Method are increased.
To avoid the race condition, we create a new Power Resource that
handles the common resources of both cameras and make both cameras
depend on that resource. This also simplifies the acpi table by removing
a Mutex.
BRANCH=poppy
BUG=b:171955583
TEST=while true; do if ssh $DUT "dmesg | grep \"failed to find sensor\" "; then break; fi; ssh $DUT reboot; sleep 30 ; done
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Change-Id: I25df0225699759c1828b8791c5bdee66529858a7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48631
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
After checked, this project doesn't need this feature.
BUG=b:173066178
BRANCH=zork
TEST=check no WRDD method in acpi.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I9a662953f3047d771f2df919ac80d0440842738e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48621
Reviewed-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use a FMAP region to cache SPD data, providing improvements in boot
time and detection of change in DIMM population (which FSP will
sometimes fail to detect / fail to invalidate the MRC cache).
Adapted from implementation used in google/hatch.
Test: build/boot Librem Mini v2, verify SPD cache used, changes
in DIMM population properly detected.
Change-Id: I15cb9aa8b00d39d098a0f901aee026bac1161a80
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48549
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com>
Change-Id: Ie4877b69de1bfa4ff981d8eb386efbddb9e0f5c2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44700
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Change-Id: Ia3c4fb41b5851b1c0ffc6bbec7d1c051e232fc94
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42978
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change adds support zinitix touchpad for casta/bluebird.
BRANCH=firmware-octopus-11297.B
BUG=b:175618033
TEST=built and verified touchpad worked on casta
Change-Id: I1a8f562de19d1a8160d52c65400553f0c68393e0
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48634
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable DCM settings.
Change-Id: I5528d176b6bb1f9a5960de981766235510e6ebf1
Signed-off-by: mtk15698 <michael.kao@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46407
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
UFS reference clock (refclk) is enabled by default, which will cause
the UFSHCI to hold the SPM signal and lead to suspend failure. Since
UFS kernel driver is not built-in, disable refclk in coreboot stage.
Signed-off-by: Wenbin Mei <wenbin.mei@mediatek.com>
Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
Change-Id: If11c1b756ad1a0b85f1005f56a6cb4648c687cf0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46408
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Add AUDPLL TUNER init code.
TEST=Boots correctly on MT8192EVB.
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Change-Id: I1f1b5b55a0a16d42311b16b89b15b31e1aa04670
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46400
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
GEVENT_MASK should cover all GEVENT pins, but was missing
SMITYPE_G_AGPIO9 and SMITYPE_G_AGPIO8.
Change-Id: Ia676476e2d2cf468d82d6d90e9fc11d34f56f153
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48483
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Base address symbols for ACPIMMIO banks that would not get
assigned at runtime must not resolve at linker-stage either.
The build of PSP-verstage should pass without the preprocessor
macros that have x86-centric view of memory space.
Change-Id: I3cb1b5a90023ebc4359835be716c5e3f9451df60
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42523
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The file seems to be all about PCI configuration access.
Change-Id: I1e64d3d7df3caa33ee92961fe7246d03f2707ab4
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43328
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I31f2d04d9fc8bdd9e270fb3cb48d71f215999a50
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42894
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Replace SMBus base addresses with proper symbols.
Change-Id: I5e0ebd7609c5c83d0e443ffba74dae68017d3ebc
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42074
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The region top_of_ram -> cbmem_top is used by FSP and cbmem, but is
also just regular DRAM. Marking it as such improves the final MTRR
solution a lot and fixes MTRR starvation depending on the setup.
Change-Id: I19ff7cf2d699b4cc34caccd91cafd6a284d699d3
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47868
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
While the Librem Mini (v1/v2) are more than capable of higher
PL1/2, they currently ship with a 40W power supply, so set PL1/2
accordingly to avoid power spikes above the PSU rating (which can
result in unexpected showdowns/reboots)
Change-Id: Ia7f89e885f1af29cbbb67d6fb844257ba2b87417
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48586
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Enable ANX7625 panel and configure display in mainboard_init() to
support display in firmware screen.
BUG=b:155713214
BRANCH=none
TEST=Recovery screen is shown in recovery mode.
Signed-off-by: Huijuan Xie <huijuan.xie@mediatek.corp-partner.google.com>
Change-Id: If730c42451f7b392285df686abc4ca252d8d42cf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46578
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Kukui based devices may use different speaker amplifiers, for example
MAX98357A, RT1015, or RT1015Q/automode. To help payloads identifying
which component was installed on board, we want to pass the speaker GPIO
in different name. This can be set in Kconfig as CONFIG_SPEAKER_GPIO_NAME.
BUG=b:174534548
TEST=emerge-kukui coreboot depthcharge chromeos-bootimage
BRANCH=kukui
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Change-Id: I4b44b026bee4d3b58646eee207aea0120071dd46
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48558
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com>
Change-Id: Ifc64fb6c60d57184c4a2f9febe765b5cb69b39ae
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44699
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Program IA32_CR_SF_QOS_MASK_x MSRs under CAR_HAS_SF_MASKS config
option. Select CAR_HAS_SF_MASKS for Tigerlake.
During CAR teardown code, MSRs IA32_L3_MASK_x & IA32_CR_SF_QOS_MASK_x
are not being reset to default as
per the doc NEM-Enhanced-Mode-Whitepaper-Tigerlake-draft-WW46.5.
Resetting the value of IA32_PQR_ASSOC[32:33] to 00b is sufficient.
Bug=b:171601324
BRANCH=volteer
Test=Build and boot to ChromeOS on Delbin.
Signed-off-by: Shreesh Chhabbi <shreesh.chhabbi@intel.corp-partner.google.com>
Change-Id: Iabf7f387fb5887aca10158788599452c3f2df7e8
Signed-off-by: Shreesh Chhabbi <shreesh.chhabbi@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48286
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
SF Mask MSRs' Programming which was done under this config
selection will be moved under a new config option called
CAR_HAS_SF_MASKS. This segregates the eNEM programming
sequence based on sub features supported in each processor.
Bug=b:171601324
BRANCH=volteer
Test=Build volteer build and boot on Delbin EVT.
Change-Id: If4d8d1ec52b7b79965fe1a957c48f571ec56dc63
Signed-off-by: Shreesh Chhabbi <shreesh.chhabbi@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48284
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Using `pci_dev_read_resources` works just as well on bd82x6x (the
allocator does the same) and allows dropping the i82801gx check.
Change-Id: I1cb05131a82ebb7c45827eff8e09e445d9c695b3
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48538
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Turn on CNVi Bluetooth for UP4 in devicetree.
BUG=none
TEST=Boot to OS, check BT enumeration.
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Change-Id: I6a3ec7014c41713697e0fcc90e28bc7bbe6aa1e0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48484
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Selma Bensaid <selma.bensaid@intel.com>
Reviewed-by: Ravishankar Sarawadi <ravishankar.sarawadi@intel.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
|
|
* Drop PcieRpSlotImplemented on internal slots
* Add PCIe port 15 that connected to CNVi/M.2 E
Change-Id: Iaa05affa760b447fc1725e674b12366684a63720
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47239
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This patch sets up cse_fw_sync() call in the romstage. The cse_fw_sync()
must be called after DRAM initialization.
BUG=b:174694480
Test=Verified on Tigerlake platform
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: Ib485a4d1d15989b162105deb32bb317d7a0f2856
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48281
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch sets up cse_fw_sync() call in the romstage.The cse_fw_sync()
must be called after DRAM initialization.
BUG=b:174694480
Test=Verified on Drawlet
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I43030e77f6ede53c23e6c9e65d34db85c141e13a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48280
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The patch sets up the CSE Lite driver in the romstage instead of ramstage.
With this change, CSE Lite driver sets CSE's boot partition and triggers
CSE FW update in the romstage. The cse_fw_sync() must be called after DRAM
initialization as HMRFPO_ENABLE HECI command (which is used by
cse_fw_sync()) is expected to be executed after DRAM initialization. With
this change, it improves the cold boot time by ~154ms.
Test=Verified on JSL and TGL platforms
BUG=b:174694480
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I2fd562a5c6c8501226abbcb68021d9356bcf0b73
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48279
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch modifies CSE Lite driver to use 'if' C-lanugage construct
instead of #if macro and adds 'if SOC_INTEL_CSE_RW_UPDATE' to the prompts
of CSE Update related KConfigs to prevent appearing them in the menu.
TEST=Built the code for drawcia
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: Iecd5cf56ecd280de920f479e174762fe6b4164b0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48494
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
The patch triggeres CrOS recovery mode if the sizes of CSE CBFS RW blob
and CSE RW boot are different.
TEST=Verified on drawcia.
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I8be589eae905b1a54a8cf981ccd3a00bd5e733f5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48423
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
SoC selects HAVE_SMI_HANDLER, so TsegSize is always set to 8 MiB. Also,
use SMM_TSEG_SIZE in place of a magic number.
Change-Id: I139e1073426051fea5d30b6ce3dd9746e0e985a2
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48578
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Remove unreferenced settings and factor out common settings. Many of
these are not mainboard-specific, and all boards use the same value.
Change-Id: Iecae61994a068e8022638a2ad9ca10174427f0a4
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48577
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
