summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2021-03-15mb/intel/adlrvp: Select ADL_ENABLE_USB4_PCIE_RESOURCESTim Wawrzynczak
This change select the Kconfig to pre-allocate the Intel-recommended bus and memory resources per-PCIe TBT root port for the adlrvp mainboard. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: Ic56ebab02e50a466662a07d122d8f40eaf16b54b Reviewed-on: https://review.coreboot.org/c/coreboot/+/51461 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-15mb/google/brya: Select ADL_ENABLE_USB4_PCIE_RESOURCES for brya0Tim Wawrzynczak
This change select the Kconfig to pre-allocate the Intel-recommended bus and memory resources per-PCIe TBT root port for the brya0 mainboard. TEST=snippet from dmesg logs shows the correct resources being allocated: PCI: 00:07.0 resource base 27fc00000 size 1c000000 align 20 gran 20 limit 29bbfffff flags 60181202 index 24 PCI: 00:07.0 resource base 83000000 size c200000 align 20 gran 20 limit 8f1fffff flags 60080202 index 20 PCI: 00:07.1 resource base 29bc00000 size 1c000000 align 20 gran 20 limit 2b7bfffff flags 60181202 index 24 PCI: 00:07.1 resource base a0000000 size c200000 align 20 gran 20 limit ac1fffff flags 60080202 index 20 PCI: 00:07.2 resource base 2b7c00000 size 1c000000 align 20 gran 20 limit 2d3bfffff flags 60181202 index 24 PCI: 00:07.2 resource base ac200000 size c200000 align 20 gran 20 limit b83fffff flags 60080202 index 20 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I6b520ae50f19a730263de7918594718f3b4b1c1a Reviewed-on: https://review.coreboot.org/c/coreboot/+/51455 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-15soc/intel/alderlake: Add Kconfig for recommended PCIe TBT resourcesTim Wawrzynczak
The Intel ADL BIOS specification #627270 recommends reserving the following resources for each PCIe TBT root port: - 42 buses - 192 MiB Non-prefetchable memory - 448 MiB Prefetchable memory Add a mainboard Kconfig which will auto-select these recommended values, in addition to PCIEXP_HOTPLUG. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: Icdfa2688d69c2db0f98d0523d5aba42eec1824db Reviewed-on: https://review.coreboot.org/c/coreboot/+/51460 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-15soc/intel/alderlake: Remove _DSD from tcss_pciexp ASL fileTim Wawrzynczak
The _DSD is generated at runtime using the Intel common pcie driver, therefore remove it from the ASL files. BUG=b:182522802, b:182478306 TEST=boot into latest kernel, no thunderbolt driver errors seen Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: Iee25a77bf5cc6636f46a5c32f3eeabe8524e0a04 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51454 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-15soc/intel/alderlake: Remove _DSD from tcss_dma ASL fileTim Wawrzynczak
The _DSD is generated at runtime using the Intel common USB4 driver, therefore remove it from the ASL files. BUG=b:182522802, b:182478306 TEST=boot into latest kernel, no thunderbolt driver errors seen Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I77dc283aeb5f52191255137e941487cf68cb7970 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51453 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-15mb/google/dedede/var/blipper: Enable touchpad supportZanxi Chen
Add touchpad into devicetree for blipper. BUG=b:172787208 BRANCH=dedede TEST=built blipper firmware and verified touchpad function the kernel log: found RMI device, manufacturer: Synaptics Change-Id: I2c9b61ba9d282f994e2f756bafe4af1091d4d617 Signed-off-by: Zanxi Chen <chenzanxi@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51188 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-15sb/intel/lynxpoint: Move S3 check out of `early_pch_init`Angel Pons
Done for consistency with other platforms. This also drops redundant S3 resume logging, as `southbridge_detect_s3_resume` already prints it. Tested on Asrock B85M Pro4, still boots and still resumes from S3. Change-Id: Id96c5aedad80702ebf343dd0a351fbd4e7b1c6c1 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51438 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-03-15sb/intel/lynxpoint: Replace HPET_ADDRAngel Pons
The `HPET_ADDRESS` Kconfig option has the same value. Use it instead. Change-Id: I268e949d4396aa20e38f719b36cc4e6226efe082 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49743 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-03-15Revert "mb/google/zork: restore stamp_boost parameter to 2500 for dirinboz"Kevin Chiu
This reverts commit 87a1bd696d47f80101e46132efae8cad8cfe5c7e. Reason for revert: skin temperature is overheating due to boost time is too long BUG=b:175364713 TEST=1. emerge-zork coreboot 2. run balance performance and skin temperature test => pass Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Change-Id: I31db06f4bcb986398e7bd2ac2858ffbedb257e2b Reviewed-on: https://review.coreboot.org/c/coreboot/+/51391 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Daniel Kurtz <djkurtz@google.com> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2021-03-15soc/mediatek/mt8192: devapc: Add domain remap settingNina Wu
MT8192 devapc supports remapping domains. There may be different domain bit for different subsys. For example, domain bit in INFRA is 4-bit, while in MMSYS, domain bit is 2-bit. For INFRA master to access MM registers, the domain bit will change from 4 to 2 and need to be remapped. In this patch we have remapped: 1. TINYSYS (3-bit to 4-bit) - domain 3 to domain 3 - others to domain 15 2. MMSYS slave (4-bit to 2-bit) - domain X to domain X, for X = 0 ~ 3 - others to domain 0 Change-Id: Id10a4c0bdf141cc76a386159896c861d0dc302aa Signed-off-by: Nina Wu <nina-cm.wu@mediatek.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49790 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-03-15mb/google/asurada: get SKU ID from AP strapping pinsHung-Te Lin
The SKU ID for Asurada should come from AP ADC channel 5 and 6. BUG=None TEST=make; boots on asurada Change-Id: I6a00c555f20aca4cd7f8bcee46ee81c17ef6ca3c Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51405 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-03-15mb/google/asurada: revise PMIC and RTC initializationYidi Lin
Move the initialization from bootblock to romstage for following reasons: - Follow MT8183 initialization sequence. - PMIC and RTC functions are only called after verstage. - Reduce bootblock size. - PMIC initialization setting is complex and may need to be changed by an RW firmware update. TEST=boot to kernel successfully Change-Id: I3e4c3f918639590ffc73076450235771d06aae91 Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51409 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Xi Chen <xixi.chen@mediatek.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2021-03-15soc/amd/cezanne: Add i2c controllers to chipset.cbMathew King
BUG=b:180531661 TEST=builds Signed-off-by: Mathew King <mathewk@chromium.org> Change-Id: I5feeead1dcb368c5173901f5cab411f439dffede Reviewed-on: https://review.coreboot.org/c/coreboot/+/51475 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-14device/pciexp_device.c: Remove CPP guardingArthur Heymans
Let the linker do its job. This fixes building with !CONFIG_PCIEXP_HOTPLUG on some platforms. Change-Id: I46560722dcb5f1d902709e40b714ef092515b164 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51417 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-03-14mb/google/guybrush: Enable PCIe devices in devicetreeMathew King
BUG=b:181690884 TEST=builds Signed-off-by: Mathew King <mathewk@chromium.org> Change-Id: I8ceeb8db24be34588b370c13d865753f095e4be6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51472 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2021-03-14soc/amd/cezanne/Kconfig: turn on GOPNikolai Vyssotski
To use this, Enable "CONFIG_RUN_FSP_GOP" in the platform's Kconfig. BUG=b:171234996 TEST=Boot Majolica with GOP graphics Change-Id: Ic9401cc93ee50fb7dbd84fe26ef24306a1673f58 Signed-off-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51422 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Mathew King <mathewk@chromium.org>
2021-03-14soc/amd/picasso/mca: don't do out of bounds array accessesFelix Held
The Picasso APUs advertise 23 MCA banks in the lower byte of the IA32_MCG_CAP MSR, which is more than the 7 core MCA banks. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I3e1c8ed437820b350c78b0517e6521582002ee1e Reviewed-on: https://review.coreboot.org/c/coreboot/+/51477 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-03-14soc/amd/picasso/mca: fix core MCA bank namesFelix Held
The bank names were copied over from Stoneyridge, but they don't match for Picasso. TEST=Checked the Picasso PPR. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ia86cf3874f8b16b007bad46535af6dafb776fbdd Reviewed-on: https://review.coreboot.org/c/coreboot/+/51476 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-14mb/google/guybrush: Add SPDs into buildMartin Roth
This enables the standard library method of adding SPDs to CBFS. BUG=b:178715165 TEST=Build Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: I2ec94fd866409e1dfa5cb65f6960ea07cbe22f2a Reviewed-on: https://review.coreboot.org/c/coreboot/+/51022 Reviewed-by: Mathew King <mathewk@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-14mb/google/guybrush: Enable EM100 support on guybrushMathew King
Add the option to build guybrush firmware with support for EM100. This will assist in bringup of the new board. BUG=b:180723776 TEST=builds Signed-off-by: Mathew King <mathewk@chromium.org> Change-Id: I2246d2952f341cd8fff8fd486cf989cdb7929411 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51071 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-13mb/amd/majolica,google/guybrush,google/mancomb: select HAVE_ACPI_RESUMERaul E Rangel
Since not all mainboards based on the Cezanne SoC have to support ACPI resume, select this option in the mainboard's Kconfig and not in the SoC's Kconfig. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I988276ccb5b61837d7f3f015d1d1aba783324b02 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51305 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-13soc/amd/cezanne/acpi/soc.asl: Include sleepstates.aslRaul E Rangel
Needed to get the _SX ASL methods. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I6323ba413a21d9d867727dbb28340e6df807c86a Reviewed-on: https://review.coreboot.org/c/coreboot/+/51303 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-13soc/intel/common/fast_spi: Fix check-fmap-16mib-crossing checkFurquan Shaikh
Currently, `check-fmap-16mib-crossing` compares the offset and end of each SPI flash region to 16MiB to ensure that no region is placed across this 16MiB boundary from the start of SPI flash. What really needs to be checked is that the region isn't placed across the 16MiB boundary from the end of BIOS region. Thus, current check works only if the SPI flash is 32MiB under the assumption that the BIOS region is mapped at the top of SPI flash. However, this check will not work if a flash part greater than 32MiB is used. This change replaces the hardcoded boundary value of 16MiB with a value calculated by subtracting 16MiB from the SPI flash size (if it is greater than 16MiB). This calculated value is used as the boundary that no region defined in the flashmap should be placed across. The assumption here is that BIOS region is always placed at the top of SPI flash. Hence, the standard decode window would be from end_of_flash - 16M to end_of_flash (because end_of_flash = end_of_bios_region). Currently, there is no consistency in the name used for BIOS region in flashmap layout for boards in coreboot. But all Intel-based boards (except APL and GLK) place BIOS region at the end of SPI flash. Since APL and GLK do not support the extended window, this check does not matter for these platforms. Change-Id: Icff83e5bffacfd443c1c3fbc101675c4a6f75e24 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51359 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-13soc/intel/fast_spi/Makefile: Rewrite 16mib check for legibilityNico Huber
Perform some cosmetical changes: * Override the first prerequisite so we can use `$<`. * Add/remove whitspace to align things (recipe needs to be indented by a single tab only). * We can use shell variables inside double quotes. To make the end of the variable name clear, use braces, e.g. "${x}". NB. Most of the double quotes are unnecessary. They only change the way the script would be failing in case of spurious whitespace. * Break some lines doing multiple things at once. * To reduce remaining clutter, put reading numbers into a shell function. And functional changes: * No need to spawn `cat`, the shell can redirect input as well as output (using `<`). * To read a number from the `fmap_config.h`, we spawned 4 processes where a single one can achieve the same. With one exception: GNU awk refuses to parse hex numbers by default. Luckily, it turned out that we don't need intermediate decimal numbers: Shells can do arithmetic with hex values as well. Change-Id: Ia7bfba0d7864fc091ee6003e09b705fd7254e99b Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51325 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-03-13soc/intel/fast_spi/Makefile: Fix exit of 16mib-check recipeNico Huber
Currently, if everything worked fine, `$fail` will be unset, leading to the following `if` statement: if [ -eq 1 ] Resulting in the error message: /bin/sh: line 9: [: -eq: unary operator expected Fix this by removing the whole `if`, we can just use `exit`. Change-Id: I1bc7508d2a45a2bec07ef46b9c5d9d0b740fbc74 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51324 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-03-13mb/google/guybrush: Add guybrush APCBs into buildMartin Roth
This adds the Guybrush APCBs into the AMD firmware binary. BUG=b:182510885 TEST=Build Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: Iba40cab1d68e9f8d7291e7d715be185a3b6249f3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51418 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mathew King <mathewk@chromium.org>
2021-03-13soc/amd/cezanne/fsp_params.c: GOP: pass VBIOS pointer to FSPNikolai Vyssotski
Pass PCI_VGA_RAM_IMAGE_START as VBIOS image pointer for GOP driver. BUG=b:171234996 Change-Id: I504f808d85d8084e6f32f73cebf02fb0f784cd73 Signed-off-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51421 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-03-13soc/amd/picasso/fsp_params.c: GOP: pass VBIOS pointer to FSPNikolai Vyssotski
Pass PCI_VGA_RAM_IMAGE_START as VBIOS image pointer for GOP driver. BUG=b:171234996 BRANCH=Zork Change-Id: I49adcacf2abb914e460fbc87b488a22dca8c8af2 Signed-off-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51420 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-03-13soc/amd/common/block/graphics/graphics: GOP: load VBIOSNikolai Vyssotski
Load VBIOS in pci set_resources to PCI_VGA_RAM_IMAGE_START (0xc0000) since pci_dev_init() will not load it in GOP case (VGA_ROM_RUN is not set). Add Cezanne GFX PID. BUG=b:171234996 BRANCH=Zork Change-Id: I4a6fea9b6cd60c862e15ed2ed539869c0f9bd363 Signed-off-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49867 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-03-13mb/google/guybrush: Add ACPI support for Chrome ECMathew King
BUG=b:180507937 TEST=builds Signed-off-by: Mathew King <mathewk@chromium.org> Change-Id: Icb8aba87390475cad7a2a9911c3832a59c987b65 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51240 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2021-03-13soc/amd/cezanne: Move globalnvs.asl to the correct locationMathew King
BUG=b:180507937 TEST=guybrush builds without globalnvs in dsdt.asl Signed-off-by: Mathew King <mathewk@chromium.org> Change-Id: I3ffe94f7b575126e61245bed9c9560313df2d725 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51291 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-13mb/google/guybrush: Configure eSPI GPIOs in early stageMathew King
BUG=b:181961514, b:180721208 TEST=builds Signed-off-by: Mathew King <mathewk@chromium.org> Change-Id: I0d22de977f09cbf46b28243d9f0c1e9a36e1398f Reviewed-on: https://review.coreboot.org/c/coreboot/+/51295 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Justin Frodsham <justin.frodsham@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-13mb/google/guybrush: Configure early GPIOs in earliest stageMathew King
Configure early GPIOs in verstage if it is run in PSP otherwise configure them in bootblock. BUG=b:181961514, b:180721208 TEST=builds Signed-off-by: Mathew King <mathewk@chromium.org> Change-Id: Ib9410089592776ffe198901f2de914fd04bdbade Reviewed-on: https://review.coreboot.org/c/coreboot/+/51348 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2021-03-13mb/google/guybrush: Enable verstageMathew King
BUG=b:181961514 TEST=builds Signed-off-by: Mathew King <mathewk@chromium.org> Change-Id: I289a2ad1adc5dcc33c5863d6138f66b9b6dc6590 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51294 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2021-03-12pci_def.h: Introduce PCI_EXP_DEVCAP2 & PCI_EXP_DEVCTL2 properNico Huber
Replace the existing, odd looking, unordered definitions used for LTR configuration with the usual names used by upstream libpci. TEST=Built google/brya0 with BUILD_TIMELESS=1: no changes. Fixes: Code looked like UEFI copy-pasta. Header file was a mess. Change-Id: Icf666692e22730e1bdf4bcdada433b3219af568a Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51327 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-12device: Give `pci_ops.set_L1_ss_latency` a proper nameNico Huber
Rename `set_L1_ss_latency` to what it does: `set_ltr_max_latencies`. TEST=Built google/brya0 with BUILD_TIMELESS=1: no changes. Change-Id: I7008aa18bf80d6709dce1b2d3bfbb5ea407a0574 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51326 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-12soc/amd: GOP: add UPD for VBIOS bufferNikolai Vyssotski
This UPD will be used to pass VBIOS buffer pointer to FSP PEI GOP driver. BUG=b:171234996 BRANCH=Zork Change-Id: I0c5d4a9d96e5c3d47e262072b689ed62e59129b3 Signed-off-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49866 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-12soc/amd/common/amdblocks/chip.h,psp.h: add missing stdint.h includeFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I6fb53d88a840a782af7502660ff85205f84523b8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51416 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-03-12soc/amd/cezanne: add XHCI SCI/GEVENT setupFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I32fd9b7165306266613e8497b5d07473b5fea02d Reviewed-on: https://review.coreboot.org/c/coreboot/+/51415 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-03-12soc/amd/common/amdblocks/smi.h: include types.h instead of stdint.hFelix Held
gpe_configure_sci has a size_t type parameter, so we need to include types.h instead of stdint.h here. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I2879d5cf27c432871a2b9c5c90bdd539b97f9d3e Reviewed-on: https://review.coreboot.org/c/coreboot/+/51414 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-03-12cpu/intel/microcode: Fix caching logic in intel_microcode_findFurquan Shaikh
CB:49896 added support in `intel_microcode_find()` to cache the found microcode for faster subsequent accesses. This works okay when the function succeeds in finding the microcode on BSP. However, if for any reason, `cpu_microcode_blob.bin` does not contain a valid microcode for the given processor, then the logic ends up attempting to find microcode again and again every time it is called (because `ucode_updates` is set to NULL on failed find, thus retriggering the whole find sequence every time). This leads to a weird race condition when multiple APs are running in parallel and executing this function. A snippet of the issues observed in the scenario described above: ``` ... microcode: Update skipped, already up-to-date ... Microcode header corrupted! ... ``` 1. AP reports that microcode update is being skipped since the current version matches the version in CBFS (even though there is no matching microcode update in CBFS). 2. AP reports microcode header is corrupted because it thinks that the data size reported in the microcode is larger than the file read from CBFS. Above issues occur because each time an AP calls `intel_microcode_find()`, it might end up seeing some intermittent state of `ucode_updates` and taking incorrect action. This change fixes this race condition by separating the logic for finding microcode into an internal function `find_cbfs_microcode()` and maintaining the caching logic in `intel_microcode_find()` using a boolean flag `microcode_checked`. BUG=b:182232187 TEST=Verified that `intel_microcode_find()` no longer makes repeated attempts to find microcode from CBFS if it failed the first time. Change-Id: I8600c830ba029e5cb9c0d7e0f1af18d87c61ad3a Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51371 Reviewed-by: Patrick Rudolph Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-12mb/google/dedede/var/boten: Increase Goodix touchscreen reset delay to 180 msStanley Wu
1. Follow GT7375P Programming Guide_Rev.0.6 to increase reset delay to 180ms. 2. Add TOUCH_RPT_EN pin(GPP_A11) control to fix TOUCH_RPT_EN pin keep high after system suspend. BUG=b:181711141 TEST=Build and boot boten to OS. Confirm TOUCH_RPT_EN pin keep low after system suspend. Change-Id: I98efbe68dab538906802647582eba0e068d9c11f Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51254 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-12mb/google/dedede/var/boten: Configure I2C5 p-sensor high and low timeStanley Wu
Configure I2C bus 5 high and low time for p-sensor device. BUG=b:181727056 TEST=Measured the I2C bus frequency reduce to 387 KHz. Change-Id: I4b6d78d84b8ea145093f52bbb13684e2c6aa979c Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51198 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-03-12soc/intel/braswell: Factor out common `acpi_fill_madt`Angel Pons
Function is identical for all mainboards, so factor it out. Change-Id: Ibe08fa7ae19bfc238d09158309f0a9fdb31ad21c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50028 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-12arch/x86/smbios_defaults.c: Default to motherboard typeAngel Pons
Nearly every board that coreboot supports is a motherboard. Change-Id: I1419874a0ba3f2e21568fa4b07b88f2048d10203 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50180 Reviewed-by: Jonathan Zhang <jonzhang@fb.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-12soc/intel/common/block/fast_spi: Clean up headerAngel Pons
Suffix `SPIBAR_HWSEQ_XFER_TIMEOUT` with its units, use lowercase for hex values and rename BIOS_CONTROL macros, as the register is not in SPIBAR. Change-Id: I3bc1f5a5ebc4c562536829e63550c0b562b67874 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50752 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-03-12soc/intel/*: drop UART pad configuration from common codeMichael Niewöhner
UART pad configuration should not be done in common code, because that may cause short circuits, when the user sets a wrong UART index. Since all boards do pad setup on their own now, finally drop the pad configuration from SoC common code. Change-Id: Id03719eb8bd0414083148471ed05dea62a895126 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48829 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lance Zhao
2021-03-12mb/intel/adlrvp: do UART pad config at board-levelMichael Niewöhner
UART pad configuration should not be done in common code, because that may cause short circuits, when the user sets a wrong UART index. Thus, add the corresponding pads to the early UART gpio table for the board as a first step. Common UART pad config code then gets dropped in CB:48829. Also switch to `bootblock_mainboard_early_init` to configure the pads in early bootblock before console initialization, to make the console work as early as possible. The board does not do any other gpio configuration in bootblock, so this should not influence behaviour in a negative way (e.g. breaking overrides). Change-Id: I55815a824ea3a77e6e603ba4beb17457f37c48f5 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49433 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-03-12mb/intel/shadowmountain: Enable Type-C subsystemV Sowmya
This patch adds the changes to enable the TCSS. BUG=b:175808146 TEST= Boot shadowmountain board, Test the functionality of the Type-C ports on both the mainboard and daughterboard by plugging in the Type-C devices and verified the devices are detected via EC console and in the OS. Signed-off-by: V Sowmya <v.sowmya@intel.com> Change-Id: Ieaf1170ca718a14d24b773a4a85516e0bbfbb569 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51026 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-12soc/amd/common/block/smu: rename mailbox register definesFelix Held
Since we have the SMN access block now, rename the SMU mailbox interface registers to clarify that those are in the SMN register space. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ic5b7093f99eabd3c29610072b186ed156f335bd8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51400 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-03-12soc/amd/common: factor out SMN access function from SMU codeFelix Held
The SMU mailbox interface gets accessed over the SMN register space, so factor out those access functions into a separate common code SMN access building block. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Iabac181972c02ae641da99f47b2aa9aa28dae333 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51399 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-03-12mb/google/dedede/var/boten: Adjust p-sensor detect distance to 20mmStanley Wu
P-sensor vendor fine-tune detect distance as 20mm for WWAN SAR table switch. BUG=b:179000150 BRANCH=dedede TEST=run "i2cdump -y -f 15 0x28" to confirm registers as expected. un-approach： => register address: 0x01 value: 0x00 approach: => register address: 0x01 value: 0x02 Confirm WWAN SAR table work as expected. Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com> Change-Id: I659721e60aa0766ed4c277dae43ded222e18ad1c Reviewed-on: https://review.coreboot.org/c/coreboot/+/51343 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-11mb/system76/lemp9: Drop unneeded memcfg values and commentsAngel Pons
This mainboard uses a Comet Lake SoC and mixed-topology DDR4 memory. Drop LPDDR-specific DQ and DQS mappings and comment about Cannon Lake. Change-Id: Icb986d1c074e64b3cfad3897b69d35d108f64bff Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51336 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Crawford <tcrawford@system76.com> Reviewed-by: Jeremy Soller <jeremy@system76.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-03-11driver/intel/fsp2_0: Allow function to run serially on all APsAamir Bohra
EFI_PEI_MP_SERVICES_STARTUP_ALL_APS passes in a boolean flag singlethread which indicates whether the work should be scheduled in a serially on all APs or in parallel. Current implementation of this function mp_startup_all_aps always schedules work in parallel on all APs. This implementation ensures mp_startup_all_aps honors to run serialized request. BUG=b:169114674 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Change-Id: I4d85dd2ce9115f0186790c62c8dcc75f12412e92 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51085 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-11src/cpu/x86: Add helper mp_run_on_all_apsAamir Bohra
Add a helper function mp_run_on_all_aps, it allows running a given func on all APs excluding the BSP, with an added provision to run func in serial manner per AP. BUG=b:169114674 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Change-Id: I74ee8168eb6380e346590f2575350e0a6b73856e Reviewed-on: https://review.coreboot.org/c/coreboot/+/51271 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-11soc/amd: move warm reset flag function prototypes to common codeFelix Held
Even though the implementation is different on Stoneyridge compared to Picasso and Cezanne, the function prototypes are identical, so move them to the AMD SoC common reset header file. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I8d3a3a9ea568ea18658c49612efabdbe36d5f957 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51395 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-03-11mb/google/mancomb: Add eSPI configurationEric Lai
BUG=b:182211161 TEST=builds Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Ie3a3bb7526d734ae1936b8c4db43543b1174829d Reviewed-on: https://review.coreboot.org/c/coreboot/+/51370 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mathew King <mathewk@chromium.org>
2021-03-11mb/google/mancomb: Enable mancomb variantEric Lai
BUG=b:182211161 TEST=builds Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I554e7193494a4bbf005aaf2fb4efd6ded383fe07 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51369 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mathew King <mathewk@chromium.org>
2021-03-11mb/google/mancomb: Enable console UARTEric Lai
BUG=b:182211161 TEST=builds Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Ia03169c524dd12b8e7803ea8039c0e98a2b069e9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51368 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mathew King <mathewk@chromium.org>
2021-03-11mb/google/mancomb: Enable ACPI tablesEric Lai
BUG=b:182211161 TEST=builds Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I623fd052404a08cf0adb471bb654622960f1aa62 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51367 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mathew King <mathewk@chromium.org>
2021-03-11mb/google/mancomb: Enable CONFIG_CHROMEOSEric Lai
BUG=b:182211161 TEST=builds Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I45dcaa8b430721f864d4e5d78ae60883175085c3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51366 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mathew King <mathewk@chromium.org>
2021-03-11mb/google/mancomb: Add stubs to configure GPIOsEric Lai
BUG=b:182211161 TEST=builds Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I7de5e4a4d2273d0ea5a84210ea0ce28d312eaa95 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51365 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mathew King <mathewk@chromium.org>
2021-03-11soc/intel/common/block/cpu: Use tab instead of spaceSubrata Banik
Convert the lines starts with whitespace with tab as applicable. TEST=Built google/brya0 and ADLRVP with BUILD_TIMELESS=1: no changes. Change-Id: Ibd11ad12caa1be866a851a8cd4bd23349e8ffbbe Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51375 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-11soc/intel/common/block: Add PCI IDs for EmmitsBurg PCHJonathan Zhang
According to Intel EmmitsBurg EDS, doc# 606161: * Add PCI devid for SPI. * Add PCI devid for ESPI (LPC). EmmitsBurg (EBG) PCH is used in the chipset with Sapphire Rapids Scalable Processor (SPR-SP). Signed-off-by: Reddy Chagam <anjaneya.chagam@intel.com> Signed-off-by: Subrata Banik <subrata.banik@intel.com> Signed-off-by: Jonathan Zhang <jonzhang@fb.com> Change-Id: Ie8925cb739c95c34febf9002149de437d19c8234 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51321 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-03-11mb/google/guybrush: Enable USB ports in devicetreeMathew King
BUG=b:180529005 TEST=builds Signed-off-by: Mathew King <mathewk@chromium.org> Change-Id: I94d97a38d992f46b32c2c6aca4c8da688d3b76fc Reviewed-on: https://review.coreboot.org/c/coreboot/+/51257 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-11mb/amd/majolica: Enable USB ACPI in devicetreeMathew King
BUG=b:180529005 TEST=boot majolica, all USB ports work Signed-off-by: Mathew King <mathewk@chromium.org> Change-Id: I6d3506bb4d54c7f8ea1e53576ef68d2aface6c89 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51256 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-03-11mb/google/guybrush: Enable Chrome EC SKUID and BOARDIDMathew King
BUG=b:181910592 TEST=builds Signed-off-by: Mathew King <mathewk@chromium.org> Change-Id: I7851d3b11ea3b026b999019d02df1144f8393753 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51270 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-03-11mb/google/guybrush: Log mainboard events to elogMathew King
BUG=b:180653357 TEST=builds Signed-off-by: Mathew King <mathewk@chromium.org> Change-Id: Ifd43d9cc1832d8ed8d90c68ba88b5667e3c04f89 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51269 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-03-10mb/google/guybrush: Add chomeec device to lpc bridgeMathew King
BUG=b:180507937 TEST=builds Signed-off-by: Mathew King <mathewk@chromium.org> Change-Id: I7b8b2ab73d66e0aaa0e9b7570661c885f7f777ca Reviewed-on: https://review.coreboot.org/c/coreboot/+/51296 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-10soc/amd/cezanne: Add USB ports to chipset.cbMathew King
BUG=b:180529005 TEST=builds Signed-off-by: Mathew King <mathewk@chromium.org> Change-Id: I16de0869abd1eff4e89cf1b8128775858702acb3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51255 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-03-10mb/google/zork/var/shuboz: support regular/numpad touchpadKane Chen
Define the 26th bit of the fw_config for the regular touchpad and numpad touchpad selection. REGULAR_TOUCHPAD: 1 NUMPAD_TOUCHPAD: 0 BUG=b:174964012 BRANCH=zork TEST=build pass Signed-off-by: Kane Chen <kane_chen@pegatron.corp-partner.google.com> Change-Id: Ie2055d6bb45a64bc0e59209cecc0f8a31c0f3718 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51278 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org>
2021-03-10mb/{amd/padmelon,google/zork}: Do not select `VGA_BIOS`Angel Pons
The VGA BIOS for AMD Padmelon and Google Zork are stored in `amd_blobs`. Do not force inclusion of VGA BIOS when `USE_AMD_BLOBS` is not enabled. Change-Id: I206e8fadc14ec0d9b162dc4d72813fdd3d43958b Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51341 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-03-10mainboard: Drop unnecessary `VGA_BIOS` defaultAngel Pons
This option defaults to n already. Change-Id: I9f6407152f7cf2e2ac6fd1fff874e400f89a27ae Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51339 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-03-10soc/amd/picasso: Fix PSP_SHAREDMEM_BASERaul E Rangel
PSP_SHAREDMEM_BASE made the assumption that _psp_sharedmem_dram would only match once. With CB:49332 there are now two symbols, and it was grabbing the wrong one. This change makes it so we match the exact symbol. It also switches to using awk to simplify the code. The bootblock.elf target that is added to the list of prerequisites also creates the bootblock.map file that gets used to extract the base address of the _psp_sharedmem_dram symbol. BUG=b:181354692 TEST=Boot zork past bootblock Fixes: 82d16b150ce3 ("memlayout: Store region sizes as separate symbols") Suggested-by: Julius Werner <jwerner@chromium.org> Signed-off-by: Raul E Rangel <rrangel@chromium.org> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I79675bd73f964282b54bca858830e26de64037c7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51300 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2021-03-10mb/amd/majolica: Update to use proper APCBs built for MajolicaMatt Papageorge
Some of the previous binaries were incorrect and should not be used for Majolica because they are templates instead of APCBs specifically built for the board. This APCB update also places the UMA region under 4G and size 32 MB which is essential for video output. TEST=Boot with UEFI BIOS and verify we can get to OS. Also verify memory region size, base and alignment. Change-Id: Id797e2ad5bd67815c09752aedc19dad7dcf8ad12 Signed-off-by: Matt Papageorge <matthewpapa07@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51014 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2021-03-10mb/google/zork/var/shuboz: adjust I2C2 data hold time for TPKane Chen
Add ".data_hold_time_ns" to follow I2C specification. The adjusted result aobut 0.315us(more than 0.3us) BUG=b:181091107 BRANCH=zork TEST=emerge-zork coreboot chromeos-bootimage Signed-off-by: Kane Chen <kane_chen@pegatron.corp-partner.google.com> Change-Id: Id92fadcb54b9722709e32ced1f0be001b8c97975 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51361 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2021-03-10soc/amd/common/block/graphics/graphics: GOP: implement vbt_get()Nikolai Vyssotski
Even though AMD does not need VBT we still need to implement the vbt_get() function to not break the build with GOP driver enabled (see fsps_return_value_handler() in fsp2_0/silicon_init.c BUG=b:171234996 BRANCH=Zork Change-Id: I80a5131a9852a05998b55b847243748d24cf535f Signed-off-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49865 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-03-10mb/google/zork: Use SOC defines instead of magic numbersMathew King
BUG=b:182269526 TEST=builds Signed-off-by: Mathew King <mathewk@chromium.org> Change-Id: I351fb4fc493bb92b31e2c8bc946dfb048045335c Reviewed-on: https://review.coreboot.org/c/coreboot/+/51384 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-03-10soc/amd/picasso: Allow GPIO defines to be used in ASLMathew King
BUG=b:182269526 TEST=builds Signed-off-by: Mathew King <mathewk@chromium.org> Change-Id: Ib33a46a6eead84eaff2c4ac320800b7993f5c3f6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51383 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-03-10mb/google/zork/var/vilboz: Add Mainboard Type for VCORE ICJohn Su
To define Mainboard Type config, use the fw_config bit[26]. Check MB Type to modify SDLE settings for different VCORE IC. BUG=b:177193131 BRANCH=zork Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Change-Id: If153c0a3e641ae32ef89737925bd9f62dfb71f3d Reviewed-on: https://review.coreboot.org/c/coreboot/+/49683 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Kangheui Won <khwon@chromium.org>
2021-03-10mb/google/zork: add UPDM updating function before runing FSP-MChris Wang
Add the UPD updating hook in early stage for customization. BUG=b:117719313 BRANCH=zork TEST=build,check the hook function been executed. Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com> Change-Id: I4954a438a51b29b086015624127e651fd06f971b Reviewed-on: https://review.coreboot.org/c/coreboot/+/51181 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Kangheui Won <khwon@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-10soc/amd/cezanne: select common APOB NV cache codeFelix Held
BUG=b:181766974 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I660f19d18810c35dafcd75bcd1993216b7b09644 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51268 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-10vendorcode/intel/fsp: Add Alder Lake FSP headers for FSP v2081_02Ronak Kanabar
The headers added are generated as per FSP v2081_02. Previous FSP version was v2037. Changes Include: - Adjust UPD Offset in FspmUpd.h and FspsUpd.h - Add DevIntConfigPtr and NumOfDevIntConfig UPDs in Fsps.h BUG=b:180758116 BRANCH=None TEST=Build and boot ADLRVP Cq-Depend: chrome-internal:3669105 Change-Id: Ib99748a428709ffad27d47f600e00bd91b70d8f3 Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51248 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-10drivers/i2c: sx9310: Replace register map with descriptive namesGwendal Grignou
The current driver is using chip registers map to configure the SAR sensor, which is opaque, especially when the datasheet is not published widely. Use more descriptive names, as defined in Linux kernel documentation at https://www.kernel.org/doc/Documentation/devicetree/bindings/iio/proximity/semtech%2Csx9310.yaml BUG=b:173341604 BRANCH=volteer TEST=Dump all tables, check semtech property: for i in $(find /sys/firmware/acpi/tables/ -type f) ; do f=$(basename $i); cat $i > /tmp/$f.dat ; iasl -d /tmp/$f.dat done In SSDT.dsl, we have: Package (0x06) { Package (0x02) { "semtech,cs0-ground", Zero }, Package (0x02) { "semtech,startup-sensor", Zero }, Package (0x02) { "semtech,proxraw-strength", Zero }, Package (0x02) { "semtech,avg-pos-strength", 0x0200 }, Package (0x02) { "semtech,combined-sensors", Package (0x03) { Zero, One, 0x02 } }, Package (0x02) { "semtech,resolution", "finest" } } Change-Id: I8d1c81b56eaeef1dbb0f73c1d74c3a20e8b2fd7b Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50210 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-03-10soc/amd/stoneyridge/smihandler: sort includes alphabeticallyFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ib317493fe938fe961aed06557e655ed8498e2694 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51382 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-03-10soc/amd/stoneyridge/smihandler: remove unused device/pci_def.h includeFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I388cdb1fb9b3decaa6eb6e0e4e538c620d3048a2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51381 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-03-10nb/intel/haswell: Finalize northbridge in ramstageAngel Pons
There's no need to finalize the northbridge in SMM. This also makes unification with Broadwell easier. Tested on Asrock B85M Pro4, still boots and registers get locked. Change-Id: I8b2c0d14a79e4fcd2e8985ce58542791cef9b1fe Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51157 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-03-10nb/intel/haswell/pcie.c: Add missing pre-ASPM initAngel Pons
Add devicetree configuration parameters for mainboard-specific settings, and provide reasonable defaults, which should usually be good enough. This is based on Haswell SA Reference Code version 1.9.0 (Nov 2014). Tested on Asrock B85M Pro4, registers now have the expected values. Change-Id: I0dcdd4ca431c2ae1e62f2719c376d8bdef3054bd Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47223 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-10soc/intel/common/block/smm: Ignore PM1 and GPE0 events in SCI modeAngel Pons
When the SCI_EN bit is set, PM1 and GPE0 events will trigger a SCI instead of a SMI#. However, SMI_STS bits PM1_STS and GPE0_STS can still be set. Therefore, when SCI_EN is set, ignore PM1 and GPE0 events in the SMI# handler, as these events have triggered a SCI. Do not ignore any other SMI# types, since they cannot cause a SCI. Note that these bits are reserved on APL and GLK. However, SoC-specific code already accounts for it. Thus, no special handling is needed here. Change-Id: I5998b6bd61d796101786b57f9094cdaf0c3dfbaa Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50750 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2021-03-10soc/mediatek/mt8192: mt6315: revise initial settingHsin-Hsiung Wang
Remove unused boot status settings. Reset the power-off sequence to zero to meet hardware requirement. BUG=b:179000151 BRANCH=none TEST=boot asurada correctly Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com> Change-Id: Ie9d39be532ec378bd6df6bf1b93307dae4068fc6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51246 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-10soc/mediatek/mt8192: mt6315: update initial flowHsin-Hsiung Wang
We saw EXT_PMIC_EN1 and PPVAR_DVDD_PROC_BC power off sequence failure, and after checking MT6315 MT6315 PMIC protection key summary.xlsx and MT6315 Top and CLK programming guide.docx, we found there are something wrong about the sequence of magic key protection flow and clk setting. Update correct initial flow. BUG=b:179000151 BRANCH=none TEST=boot asurada correctly Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com> Change-Id: I1b7f970a44904fda09a97f4064eef7c95feefad7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51245 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-10soc/mediatek/mt8192: mt6315: update correct slave idHsin-Hsiung Wang
The initial settings for MT6315 were not applied correctly because the setup process didn't specify correct slave id (incorrectly always sending 0), and may cause failure in power off sequence. BUG=b:179000151 BRANCH=none TEST=boot asurada correctly Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com> Change-Id: Ifd04da8ac55bcc9f9fdbc088d430522c2725ad47 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51056 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2021-03-10drivers/usb/pci_xhci: Add cezanne xhci pci devce idMathew King
BUG=b:180529005 TEST=builds Signed-off-by: Mathew King <mathewk@chromium.org> Change-Id: I836bb838cc97593451f869490ff3c9dd156245b8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51349 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-10mb/google/guybrush: Add smihandlerMathew King
BUG=b:180507707 TEST=builds Signed-off-by: Mathew King <mathewk@chromium.org> Change-Id: I25ce0ca869ca854ff33242d2c416319e9688cc6f Reviewed-on: https://review.coreboot.org/c/coreboot/+/51264 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-10mb/google/guybrush: Enable Chrome ECMathew King
BUG=b:180507937 TEST=builds Signed-off-by: Mathew King <mathewk@chromium.org> Change-Id: I3cdd6422b1bc53ea934346327359cbc6d86baeeb Reviewed-on: https://review.coreboot.org/c/coreboot/+/51043 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-10soc/amd/picasso/smihandler: sort includes alphabeticallyFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I674cff3352cd9f5d20b3d8f7e77339d045cadbb8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51357 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-10soc/amd/cezanne/smihandler: add ELOG and SMMSTORE supportFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I6bad684bc6a36bb4a2b83d10ff9da1c136f8bbd9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51356 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Mathew King <mathewk@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-10soc/amd/picasso/smihandler: remove unused device/pci_def.h includeFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: If4f75eadca101593cf37faf2722f4ea8f509a1f7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51355 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-10soc/amd/*/smihandler: factor out ELOG and SMMSTORE handlerFelix Held
This also replaces the southbridge_ prefix of the handler functions with a handle_ prefix. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ib6ea1f4e2700c508a8bf72c488043e276ba4a062 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51354 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-09soc/amd/cezanne/Makefile: pass APOB NV parameters to amdfwtoolFelix Held
BUG=b:181766974 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I99d5984da82cfc98a106fc5c27e32fdc3cc13b3b Reviewed-on: https://review.coreboot.org/c/coreboot/+/51266 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 15:11:58 +0000