summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2012-02-10Remove non-existent includeSven Schnelle
Change-Id: I702d59371b4a57ce22623cbab6e936b653d57edf Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/619 Tested-by: build bot (Jenkins)
2012-02-10i5000: halt second BSPSven Schnelle
If both FSBs on i5000 are equipped with CPU packages, one CPU from each package is elected as BSP. To prevent races between both BSPs, hlt the second BSP. Change-Id: I6bfcb17d34e9f028280acff1694309e37307ec21 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/615 Tested-by: build bot (Jenkins)
2012-02-09Add Intel Socket LGA771Sven Schnelle
Change-Id: Iee7d3ff2884d8c43ff1af498160589e551bc9cc8 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/492 Tested-by: build bot (Jenkins)
2012-02-09VIA cpus: apply un-written naming rulesKyösti Mälkki
Rename files and directories: model_c3 -> c3 model_c7 -> c7 Change-Id: If144fc501e8ae44b347ac44fa90c689c33a8e126 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/614 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-02-09Remove no-op Makefiles under mainboard directoryKyösti Mälkki
Patch removes following files: src/mainboard/amd/serengeti_cheetah/Makefile.inc src/mainboard/amd/serengeti_cheetah_fam10/Makefile.inc src/mainboard/broadcom/blast/Makefile.inc src/mainboard/hp/dl145_g1/Makefile.inc src/mainboard/msi/ms9282/Makefile.inc src/mainboard/supermicro/h8dme/Makefile.inc src/mainboard/tyan/s2881/Makefile.inc src/mainboard/tyan/s2892/Makefile.inc src/mainboard/via/epia-m700/Makefile.inc Change-Id: I020776313abff1772be38afc896af51ca5ab6453 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/612 Tested-by: build bot (Jenkins) Reviewed-by: Kerry Sheh <shekairui@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-02-07Don't loop infinitely long on serial comm failuresKyösti Mälkki
If serial uart (8250/16x50) takes abnormally long to respond, give up on logging to serial console and instead let the system boot. Also reference bit in LSR register with correct name. Change-Id: I3796efc3e8690425f04a130af4bc99541b64d335 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/611 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2012-02-07Delete hard-coded driver includesKyösti Mälkki
Driver components are conditionally included in the build using the Kconfig options. Change-Id: I05417ee263a5b82e947600482dfb68f7a3f52d58 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/610 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-02-07Fix multipleVGA cards resource conflict on WindowsKerry Sheh
If multiple VGA-compatible legacy graphic cards decode the IO range 3B0-3BB, 3C0-3DF and MEM range A00000-BFFFF. Windows 7 complain a resource conflict, so only one VGA card can works at the same time. There is a discussion in coreboot mail list before, please reference thread: "how to prevent legacy resource conflictwith multipleVGA cards" http://www.coreboot.org/pipermail/coreboot/2010-October/061508.html Linux using VGA Arbiter module(vgaarb) to resolve this resource conflict, Please see the following linux dmesg log, more information can be found in Linux source dir Documentation/vgaarbiter.txt. But it seems that windows don't dealwith this conflict. ~# dmesg | grep -i vgaarb [ 0.774076] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem [ 0.776065] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,l [ 0.780051] vgaarb: loaded [ 0.784049] vgaarb: bridge control possible 0000:01:00.0 [ 0.788050] vgaarb: bridge control possible 0000:00:01.0 For the second legacy graphic device, coreboot already disabled the IO and MEM decode in function set_vga_bridge_bits(). But it will be enabled again in function pci_set_resource(), if the second legacy vga-compatible graphic device take any IO/MEM resources. Following log printed by enable_resources() shows the problem: ...snip... PCI: 00:00.0 cmd <- 06 PCI: 00:01.0 subsystem <- 1022/1410 PCI: 00:01.0 cmd <- 07 <== The first graphic device PCI: 00:01.1 subsystem <- 1022/1410 PCI: 00:01.1 cmd <- 02 PCI: 00:02.0 bridge ctrl <- 0003 PCI: 00:02.0 cmd <- 07 ...snip... PCI: 01:00.0 cmd <- 03 <== The second graphic device PCI: 01:00.1 cmd <- 02 PCI: 02:00.0 cmd <- 02 PCI: 03:00.0 cmd <- 03 done. ...snip... The IO & MEM decoding on the second vga graphic device should be disabled. Please reference PCI spec. section 3.10 in detail. set_vga_bridge_bits() would do this work for us, it did the right thing, but was put to the wrong place, the setting would be overwritten by assign_resources() later. In order to make sure the set_vga_bridge_bits() setting not be overwritten by others, moving the call of set_vga_bridge_bits() to the end of dev_configure(), instead of at the beginning. This patch resolved the dual graphic cards resource conflict in windows7, multiple vga-compatible graphic cards can work together in windows7. Signed-off-by: Kerry Sheh <shekairui@gmail.com> Signed-off-by: Kerry Sheh <kerry.she@amd.com> Change-Id: I0de5e3761b51e2723d9c1dc0c39fff692e3a779d Reviewed-on: http://review.coreboot.org/489 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-02-07Inagua: Indent and wihtespace cleanupKerry Sheh
Change-Id: Ie574e08f138c88084c8ce06d0d0acc489013e3d7 Signed-off-by: Kerry Sheh <shekairui@gmail.com> Signed-off-by: Kerry Sheh <kerry.she@amd.com> Reviewed-on: http://review.coreboot.org/547 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-02-07Inagua: mainboard specific GPIO settingKerry Sheh
Pcie device connected to Hudson/sb800 southbridge GPP training can works, by applying this mainbaind specific GPIO PCIE De-Assert setting. Change-Id: I563b2e6354a958a28f5d0162e7a4d60aa437fb9b Signed-off-by: Kerry Sheh <shekairui@gmail.com> Signed-off-by: Kerry Sheh <kerry.she@amd.com> Reviewed-on: http://review.coreboot.org/543 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-02-07Inagua: Inagua GNB ddi lanes and pcie lanes config updateKerry Sheh
DDI lanes configuration update to make LVDS works. Pcie lanes configuration update to make MiniPcie slot 1 works. Change-Id: I40aaf28119b946b3a6383ceff7c734c9c3fd313e Signed-off-by: Kerry Sheh <shekairui@gmail.com> Signed-off-by: Kerry Sheh <kerry.she@amd.com> Reviewed-on: http://review.coreboot.org/544 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-02-07Inagua: devicetree.cb updateKerry Sheh
Add the slots connection comments to devicetree.cb Change-Id: I3ccb2641c8d04a6a3c66ac11a562ba3b0dc0578a Signed-off-by: Kerry Sheh <shekairui@gmail.com> Signed-off-by: Kerry Sheh <kerry.she@amd.com> Reviewed-on: http://review.coreboot.org/545 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-02-07Move SeaBIOS output out of coreboot source treeStefan Reinauer
Make sure SeaBIOS build files live under $(OUT) instead of in the source tree. Change-Id: I7d357773e32bc25ba7e7eae3fb6ddc31feb413ec Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/552 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-02-07Add OPROM mapping support to corebootStefan Reinauer
This allows to add a PCI ID mapping function for option roms so that the same option rom can be used for a series of devices / PCI IDs. Intel and AMD often use the same option rom for a number of PCI devices with differend IDs. A function to implement such a mapping could look like this (or anything else appropriate): /* some vga option roms are used for several chipsets but they only have one * PCI ID in their header. If we encounter such an option rom, we need to do * the mapping ourselfes */ u32 map_oprom_vendev(u32 vendev) { u32 new_vendev=vendev; switch(vendev) { case 0xa0118086: new_vendev=0xa0018086; break; } return new_vendev; } Change-Id: I1be7fe113b895075d43ea48fe706b039cef136d2 Reviewed-on: http://review.coreboot.org/573 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-02-07Inagua: Synchronize AMD/inagua mainboard.Kerry Sheh
AMD/persimmon mainboard code is derived from AMD/inagua mainbard. Persimmom update a lot in the last few month, sync these modification to inagua. Change-Id: Ia038e5a2b9550fe81bb075f31e30b98354758e9e Signed-off-by: Kerry Sheh <shekairui@gmail.com> Signed-off-by: Kerry Sheh <kerry.she@amd.com> Reviewed-on: http://review.coreboot.org/542 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-02-05SIO: condition compile Nuvoton WPCM450 early_init.cKerry Sheh
Compile Nuvoton WPCM450 early_init.c when CONFIG_SUPERIO_NUVOTON_WPCM450 Change-Id: Ie31b8ae6aa45d6f77efa2b61e215ba0987abf878 Signed-off-by: Kerry Sheh <kerry.she@amd.com> Signed-off-by: Kerry Sheh <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/566 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-02-02i3100: configure pci irqsSven Schnelle
without it, you can't boot from PCI devices like scsi controllers which require an interrupt set. So preconfigure all pci devices. Change-Id: I2cd781227701e8363d83bd90e0e36994359fc194 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/603 Tested-by: build bot (Jenkins)
2012-02-02CIMX wrapper: remove redudant traversing sb800 and sb900 CIMX dirKerry Sheh
AGESA and CIMX build changed from commit 2a830d0b, sb800 and sb900 CIMX dir already traversed in vendorcode Makefile. Change-Id: I5101b22e140725337bf5074b9170e582c8e3bf40 Signed-off-by: Kerry Sheh <kerry.she@amd.com> Signed-off-by: Kerry Sheh <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/602 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-02-02SB700 southbridge: AMD SB700/SP5100 southbridge CIMX codeKerry Sheh
Support AMD SB700 and SP5100 chipsets. Change-Id: I0955abf7f48a79483f624b46a61b22711315f888 Signed-off-by: Kerry Sheh <kerry.she@amd.com> Signed-off-by: Kerry Sheh <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/560 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-02-02RD890 Northbridge: AMD RD890/SR56X0 Northbridge CIMX codeKerry Sheh
Change-Id: If9908ffeb5b707a660db38dc44f5118347cbcc06 Signed-off-by: Kerry Sheh <kerry.she@amd.com> Signed-off-by: Kerry Sheh <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/557 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-02-02Add Intel i5000 Memory Controller HubSven Schnelle
Change-Id: Ic169f3f61babfcfa2ddcb84fc0267ebcf8c5f3bb Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/491 Tested-by: build bot (Jenkins)
2012-01-31i3100: add sata_ports_implemented optionSven Schnelle
BIOS needs to set the bit mask which ports are iplemented on the board. Without setting this option, seabios fails to boot from SATA. Change-Id: I21de3fde3a9cff7c590226f70fa549274f36e2a8 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/601 Tested-by: build bot (Jenkins)
2012-01-31i3100: Add init sequenceSven Schnelle
i3100 misses the magic SATA init sequence, which makes all requests fail. Captured from the vendor BIOS, which writes those bits on all configurations. Change-Id: I293b7d9cd681181311ecaced6d7df9b2706c711f Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/600 Tested-by: build bot (Jenkins)
2012-01-31X86: fix cpu_phys_address_size()Sven Schnelle
CPUs with CPUID level >= 0x80000008 can return the number of physical address bits. Change-Id: I1c0523b6a091c476af838d173ed9030280360d7f Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/599 Tested-by: build bot (Jenkins)
2012-01-31X60/T60: Add option to enable/disable bluetoothSven Schnelle
Change-Id: I9761a8a9a7cc708fe95169cb8b79b413b97ee523 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/598 Tested-by: build bot (Jenkins)
2012-01-31X60: fix dockingSven Schnelle
Fix ordering of power/reset/undock procedure to prevent crashes seen with the old code. Also call dlpc_init() only once. Change-Id: I27d1f42e845fcccde40e6ca5af4a7762edab5d36 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/597 Tested-by: build bot (Jenkins)
2012-01-31mainboard/lenovo/t60, x60: Disable CHECK_SLFRCS_ON_RESUMEPeter Stuge
This makes resume from S3 work. Change-Id: I472baf2fbde46bfac223ce39fc81b8e09849fb7f Signed-off-by: Peter Stuge <peter@stuge.se> Reviewed-on: http://review.coreboot.org/591 Tested-by: build bot (Jenkins) Reviewed-by: Sven Schnelle <svens@stackframe.org>
2012-01-31northbridge/intel/i945: CHECK_SLFRCS_ON_RESUME Kconfig optionPeter Stuge
Originally brought up by Sven Schnelle in March 2011 http://patchwork.coreboot.org/patch/2801/ http://www.coreboot.org/pipermail/coreboot/2011-March/064277.html On some mainboards it may be neccessary to reset early during resume from S3 if the SLFRCS register indicates that a memory channel is not guaranteed to be in self-refresh. On other mainboards, such as Lenovo X60 and T60, the check always creates false positives, effectively making it impossible to resume. The SLFRCS register is documented on page 197 of Mobile Intel® 945 Express Chipset Family Datasheet Document Number: 309219-006 which is publically available, and the register indicates if a memory channel is guaranteed to be in self-refresh mode (if bit = 1), or that a memory channel *may or may not be* in self-refresh mode (if bit = 0). The register can thus only be used to positively learn that memory is in self-refresh. It is not known for sure that memory is *not* in self-refresh. The register is reset by the PWROK signal, which *should* go low during S3, and go high again when resuming, so it is unsurprising that SLFRCS has already been cleared when we read the register. Sven's measurements of the CKE signal on a ThinkPad shows that memory remains in self-refresh indefinitely, until coreboot re-initializes the memory controller, even when SLFRCS bits were = 0. Boards which require a warm reset when SLFRCS bits are cleared must now explicitly enable the check in the mainboard Kconfig file. This commit selects the new option in all existing i945 mainboards. A follow-up commit will remove the option for ThinkPads. Change-Id: I02320675efb8fde05c371ef243ba5093a4da6d11 Signed-off-by: Peter Stuge <peter@stuge.se> Reviewed-on: http://review.coreboot.org/590 Tested-by: build bot (Jenkins) Reviewed-by: Sven Schnelle <svens@stackframe.org>
2012-01-31X60/T60: fix default baudrateSven Schnelle
Value required to get 115200 is actually 0, not 5. Change-Id: Id1385822bf2213c035c4f378a72168ed6676ad03 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/592 Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: build bot (Jenkins)
2012-01-30pcengines: align VENDOR_ and BOARD_ names for PC enginesPhilip Prindeville
Coming changes to abuild require that VENDOR_ and BOARD_ names have common suffixes. Change-Id: I44cf759dd3b2d02c525eb325dc9c5c989f172ac5 Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> Reviewed-on: http://review.coreboot.org/548 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-01-27vga: removed inclusion of .c filesVikram Narayanan
Add local vga.h for prototypes. Change-Id: I5ff627c6420d4b7fd1bc9a537f406ef6d9597522 Signed-off-by: Vikram Narayanan <vikram186@gmail.com> Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/588 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-01-26Make Geode GX2 VGA setup work.Nils Jacobs
Add MSR register write for VGA memory setup Add missing license Add bit explanation Change-Id: I1cb36eeccd84f0056c829f50d9864047654ce906 Signed-off-by: Nils Jacobs <njacobs8@adsltotaal.nl> Reviewed-on: http://review.coreboot.org/580 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-01-26pci_ops_mmconf: Move conditional compilation to MakefileVikram Narayanan
Moved the conditional compilation out of the source file Change-Id: Ic4045006f39d70f4a0bc37d1bd5e073ed8477c68 Signed-off-by: Vikram Narayanan <vikram186@gmail.com> Reviewed-on: http://review.coreboot.org/578 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-01-26AGESA F15: AMD family15 AGESA codeKerry Sheh
AMD AGESA code to support Orochi platform family15 model 00-0fh processores, AMD C32, G34, and AM3r2 Sockets are supported. Change-Id: If79392c104ace25f7e01db794fa205f47746bcad Signed-off-by: Kerry Sheh <kerry.she@amd.com> Signed-off-by: Kerry Sheh <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/554 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-01-25Mahogany Fam10 MPtable fixDave Frodin
Make changes MPtable to match ACPI tables. Change-Id: I387f301370582fcb5e0d348d793333a919d2f373 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: http://review.coreboot.org/575 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-01-24RD890: pci_ids updateKerry Sheh
RD890 CIMX support AMD RD890TV, RX780, RD780, SR56x0, RD890 and 990FX chipsets, add their pci device id respectively. Change-Id: I30c62c5802279ff2ee8da1cae41395e6899339bb Signed-off-by: Kerry Sheh <kerry.she@amd.com> Signed-off-by: Kerry Sheh <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/558 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-01-24AMD Mahogany Fam10 ACPI table fixes.Marc Jones
Fix the ACPI IRQ routing. Also. fix the SSDT generations and TOM2 fixup. Change-Id: I03e6de7bb58440058306c9c9888eb2961748c385 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: http://review.coreboot.org/574 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-01-24pci_ops_conf: Indentation fixesVikram Narayanan
Indentation fixes in src/arch/x86/lib/pci_ops_conf{1,2}.c Change-Id: I56e8ff6d2ee3a0b871b40577e10c99dea4b3b1bd Signed-off-by: Vikram Narayanan <vikram186@gmail.com> Reviewed-on: http://review.coreboot.org/576 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-01-24pci_ops_mmconf: Indentation fixesVikram Narayanan
Indentation fixes in src/arch/x86/lib/pci_ops_mmconf.c Change-Id: If8337bae06295db16ed1c129ab76dea37eb465ae Signed-off-by: Vikram Narayanan <vikram186@gmail.com> Reviewed-on: http://review.coreboot.org/577 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-01-23post code: Replaced hard-coded post code with macroVikram Narayanan
Added a macro in the post code list, which replaces hard coded value in cpu/x86/cache/cache.c Change-Id: I27cb27827272584a8a17a41c111e2dc155196a97 Signed-off-by: Vikram Narayanan <vikram186@gmail.com> Reviewed-on: http://review.coreboot.org/572 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-01-21trivial: spelling fixes in commentsVikram Narayanan
Few spelling fixes in entry16.inc Change-Id: Iad3d18eee3f498171cb766589aaebefdcf0e9767 Signed-off-by: Vikram Narayanan <vikram186@gmail.com> Reviewed-on: http://review.coreboot.org/571 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-01-21adm1026: removed prototypeVikram Narayanan
Removed the prototype and restructured the code Change-Id: I13a648acf7bae30635e0469e301ce5635d9d7a8c Signed-off-by: Vikram Narayanan <vikram186@gmail.com> Reviewed-on: http://review.coreboot.org/570 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-01-20Leave SSE and MMX instructions enabled in corebootStefan Reinauer
In order to use SSE+MMX optimized payloads we don't want to disable SSE+MMX instructions in the CPU after romstage. Change-Id: I51aeb01f04492ad7bc8b1fe181a4ae17fe0ca61e Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/553 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-01-18Clean up AMD romstage.c serial outputMarc Jones
This cleans up the strings in romstage.c, removing the ugly "got past". Also, cleaned up comments and some spacing. Change-Id: I0124df76eb442f8a0009a31a8632e4fd67ed7782 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: http://review.coreboot.org/539 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-01-18Add subsystem callbacks for VT8237x and VT890 family of chipsetsRudolf Marek
Change-Id: Id34615f0c229d276d72cdf984cf82ea8cc1a85bb Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/523 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-01-18Remove duplicated line of code in AMD wrappers.Marc Jones
This line was unnecessary and was duplicated on several mainboards. Change-Id: I438da05c770ded0bd32256f1c157cabcc383667a Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: http://review.coreboot.org/541 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-01-18Remove old AMD #defineMarc Jones
The #define REQUIRED_CALLOUTS is no longer used on these platforms. Change-Id: I536eb94119f1bc8f81e59ebefacdd4e04d0ed3ef Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: http://review.coreboot.org/540 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-01-18Clean up AMD romstage.c whitespace indent issuesMarc Jones
Change-Id: I1713f1a3b548cb8e8ea5cf57eef95486ceb05ab9 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: http://review.coreboot.org/538 Tested-by: build bot (Jenkins) Reviewed-by: Vikram Narayanan <vikram186@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-01-18Add coreboot version to id areaPatrick Georgi
There was no good way to extract the build version from an image. This change will be mostly backward compatible: The only assumption that could break is that the board name string ends directly before the 3 dwords that represent .id's "header". Change-Id: I325491a0c42911d9d6ecd59e21ee1b756c987693 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/537 Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: build bot (Jenkins)
2012-01-18Unify ID_SECTION_OFFSET and mark it deprecatedPatrick Georgi
We used to put the id section at -0x10, with some boards overriding this to avoid collisions with romstraps. Hardcode the location at -0x80, at the possible expense of some space (0x70 bytes). This also makes the section easier to find in a binary image. At some point, CONFIG_ID_SECTION_OFFSET can be removed, so this option is moved to src/Kconfig.deprecated_options. Change-Id: I6ce2d6e94e57717939bda070bfe0c9df80ca2a89 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/549 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2012-01-12lib: add ram_check_nodieSven Schnelle
The current implementation calls die() if memory checking fails. This isn't always what we want: one might want to print error registers, or do some other error handling. Introduce ram_check_nodie() for that reason. It returns 0 if ram check succeeded, otherwise 1. Change-Id: Ib9a9279120755cf63b5b3ba5e0646492c3c29ac2 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/532 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-01-11W83627HF: remove unused functionSven Schnelle
When CONFIG_EXPERT is set, compilation fails with: src/superio/winbond/w83627hf/superio.c:61:13: error: ‘w83627hf_16_bit_addr_qual’ defined but not used [-Werror=unused-function] cc1: all warnings being treated as errors This function isn't used in the code, so just remove it. Change-Id: I117e221fb3c3a20a7d7e7e2e86d7dbfdffc2cbff Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/533 Tested-by: build bot (Jenkins)
2012-01-10MTRR: get physical address size from CPUIDSven Schnelle
The current code uses static values for the physical address size supported by a CPU. This isn't always the right value: I.e. on model_6[ef]x Core (2) Duo CPUs physical address size is 36, while Xeons from the same family have 38 bits, which results in invalid MTRR setup. Fix this by getting the right number from CPUID. Change-Id: If019c3d9147c3b86357f0ef0d9fda94d49d811ca Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/529 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-01-10Add missing HAVE_HARD_RESETSven Schnelle
Change-Id: I6b612dbd3eb6e8cc45f1c7abca85732fb64de98c Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/531 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2012-01-10i945: fix tsc udelay()Sven Schnelle
The comparision is the wrong way round: as long as tsc is below tsc1, the timeout is not reached Change-Id: I75de74ef750b5a45be0156efaf10d7239a0b1136 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/530 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-01-09Fix Geode GX2 + LX caching for tiny bootblock.Nils Jacobs
Change-Id: If681a33deb7df752b37c6a8a20482d3c374af936 Signed-off-by: Nils Jacobs <njacobs8@adsltotaal.nl> Reviewed-on: http://review.coreboot.org/528 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Philip Prindeville <philipp@redfish-solutions.com>
2012-01-09ACPI: mark empty get_cst_entries() weakSven Schnelle
This function prevents the linker from choosing the right get_cst_entries(), preventing writing the _CST tables. Change-Id: I4bc0168aee110171faeaa081f217dfd1536bb821 Signed-off-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/496 Tested-by: build bot (Jenkins)
2012-01-08rs780: correct comment in switching_gpp_configurations()Jonathan A. Kollasch
Change-Id: I6417a92523eea7307d080669fbc4e16ee28c8a6c Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-on: http://review.coreboot.org/524 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-01-08adm1027: add return statementVikram Narayanan
Adds a missing return statment which will stop misleading the users Change-Id: I53741f1136b396e9493ce959b54efc00c9b09764 Signed-off-by: Vikram Narayanan <vikram186@gmail.com> Reviewed-on: http://review.coreboot.org/522 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-01-07Update geode GX2 tree to match LX.Nils Jacobs
Change-Id: I5b99c531e44ea09990b9da0b97213fb7945f34ee Signed-off-by: Nils Jacobs <njacobs8@adsltotaal.nl> Reviewed-on: http://review.coreboot.org/512 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-01-05rs780: use bitwise rather than boolean notJonathan A. Kollasch
Change-Id: Ie3872c57990f9784aafda14f8c7fc842b3a65260 Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-on: http://review.coreboot.org/518 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-01-05Indentation: Various indentation fixesVikram Narayanan
Fixed indentation using indent tool in the src/drivers/i2c tree Change-Id: I5b396e5753544aff13ac5d16afc59e193a6b1da1 Signed-off-by: Vikram Narayanan <vikram186@gmail.com> Reviewed-on: http://review.coreboot.org/506 Tested-by: build bot (Jenkins) Reviewed-by: Kerry Sheh <shekairui@gmail.com> Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-01-05Fix Fam14 AGESA ACPI table generationMarc Jones
The AGESA wrapper init late call generates the SSDT and other ACPI tables. The call was failing without heap space allocated causing the ASSERT messages in the output. I think are there may still be other issues in integrating the SSDT table with the DSDT, but now it is there to debug. The changes were made in Persimmon and copied to the other Fam14 mainboards. Change-Id: I2cfd14e07cb46d2f46f5a8cd21c4c9aab44e4ffd Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: http://review.coreboot.org/517 Tested-by: build bot (Jenkins) Reviewed-by: Kerry Sheh <shekairui@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-01-05Clean up AMD Fam14 SSDTMarc Jones
The old SSDT ACPI code would only include the AGESA or the coreboot SSDT. Now include both. AGESA generates the Pstate SSDT and the second coreboot SSDT is for TOM and TOM2. Now, generate the coreboot SSDT instead of patching it. This fixes some ACPI errors in Linux and Windows bluescreens. The Persimmon acpi_tables.c is where the main changes were made and then replicated in the other Fam14 boards. Please test the other mainbords if you have one. Change-Id: I808c863597e024e3e8aeec0821e8618d96cc96a6 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: http://review.coreboot.org/516 Tested-by: build bot (Jenkins) Reviewed-by: Kerry Sheh <shekairui@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-01-05Fix Fam14 mainboard whitespaceMarc Jones
Fix whitespace and tab issues on fam14 mainbords in preperations for upcoming changes Change-Id: I6d63d428dde0a5d9748027e603b03de25d3be472 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: http://review.coreboot.org/515 Tested-by: build bot (Jenkins) Reviewed-by: Kerry Sheh <shekairui@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-01-05rs780: power down GPPSB SB lane pads in correct PCIe coreJonathan A. Kollasch
Change-Id: I059d5b155cae051f31cc2495f8a47d53e01af808 Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-on: http://review.coreboot.org/519 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2012-01-02F14 mainboard: mptable updateKerry Sheh
Add GNB internal graphic interrupt, correct southbridge hd audio device interrupt. and remove the dead code already commented out. south_station, union_station, inagua, persimmon and e350m1 mainboard are included herein. Change-Id: Ic7618d80e0432ed0e22d1c16e1adb8ba6cea2e59 Signed-off-by: Kerry Sheh <shekairui@gmail.com> Signed-off-by: Kerry Sheh <kerry.she@amd.com> Reviewed-on: http://review.coreboot.org/451 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-01-02F14 mainboard: update acpi interrupt routing in pic and apic modeKerry Sheh
Add interrupt routing for APU GNB internal Graphic and HD audio device, and other pcie bridge device in GNB. south_station, union_station, inagua, persimmon and e350m1 mainboard are included herein. Change-Id: I4b6e0fce8d34637c03de8ebfdadea008c98e193b Signed-off-by: Kerry Sheh <shekairui@gmail.com> Signed-off-by: Kerry Sheh <kerry.she@amd.com> Reviewed-on: http://review.coreboot.org/452 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-12-31White space and coding style fixes.Nils Jacobs
Change-Id: I14f39b5666fc18e8183723ec78a40a849d337736 Signed-off-by: Nils Jacobs <njacobs8@adsltotaal.nl> Reviewed-on: http://review.coreboot.org/511 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2011-12-26Fix Fam10 MMCONF_SUPPORT_DEFAULT setting.Marc Jones
I misunderstood how kconfig select works. It needs to be selected with a config option. Moved the select to the correct location. Change-Id: If9b1e21e6cbc5af4671efb76cf87dd18dbbe2234 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: http://review.coreboot.org/487 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-12-26trivial:change the value type of POST_PORT in Kconfig from int to hexVikram Narayanan
trivial change in src/console/Kconfig Change-Id: Ib6bb4ccfabaa3af18b48a23a51a576b872d807a8 Signed-off-by: Vikram Narayanan <vikram186@gmail.com> Reviewed-on: http://review.coreboot.org/505 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-12-24Only BSP CPU writes CMOS in bootblock codeKyösti Mälkki
CMOS accesses are not safe for multi-processor and only the BSP CPU should count reboots and test CMOS sanity. A questionable single byte CMOS read access from AP CPUs remains. AP CPUs should always select the same romstage prefix as BSP CPU. Change-Id: I29118e33c07c0080c94abb90f703e38312c72432 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/446 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-12-22south_station: Enable GNB hd audioKerry Sheh
Enable HD audio over HDMI. Tested in Ubuntu-11.10 with ATI Catalyst Proprietary Driver installed. Change-Id: I013c2c15ee56a7b134d980da1aa1856778a1eb4c Signed-off-by: Kerry Sheh <shekairui@gmail.com> Signed-off-by: Kerry Sheh <kerry.she@amd.com> Reviewed-on: http://review.coreboot.org/450 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-12-21Add RS780 defaut graphics ID to AMD Mahogany mainboard.Marc Jones
Added the default ID to the mainboard Kconfig. Change-Id: Ie5d39ccdda9d4f5a86214b5bd9ca629070ff152a Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: http://review.coreboot.org/488 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2011-12-21kbd: wait longer for self-test on keyboard resetMathias Krause
Some keyboards take pretty long to respond to a reset command, some even delay the ACK to the command. To make the keyboard driver more robust, increase the timeout for this special command. Also do an interface test after the self-test to ensure the keyboard is functioning properly. Another point is to reenable the keyboard *after* the scancode was set, not before. We also set the system bit when enabling the keyboard because this seems to be what older operating systems do expect. One of the problematic keyboards, which will work with this patch applied, is the DELL RT7D20. Without the patch an overly optimistic operating system, read Linux 2.4, will not recognise the keyboard because coreboot didn't fully initialize it. Change-Id: I28c8e05bdde61f71b7de084c96bc2447c1b9575e Signed-off-by: Mathias Krause <mathias.krause@secunet.com> Reviewed-on: http://review.coreboot.org/486 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-12-21Persimmon audio codec verb patch.Marc Jones
Verb data is required for the HDA audio codec in the sb800 southbridge. Verb data is not required for mainboards that use G-Series HDMI. It is also a setting the may be boards specific. This fixes issues with Windows audio on Persimmon. Change-Id: I067506871e92078d122cf79872363d8937d47e50 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: http://review.coreboot.org/490 Tested-by: build bot (Jenkins) Reviewed-by: Kerry Sheh <shekairui@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-12-14Lenovo X60/T60: add first_battery settingSven Schnelle
The EC allows to select the order in which batteries are (dis)charged. Make this setting available to the user. Change-Id: Id2a98192565419dbb53f3a7cf0b2c46b672a3ed8 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/475 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Peter Stuge <peter@stuge.se>
2011-12-14asus k8v-x: explicitly set RAM and bus voltagesFlorian Zumbiehl
Change-Id: I9426cafc252ee765d723af569c4a90e090d313d9 Signed-off-by: Florian Zumbiehl <florz@florz.de> Reviewed-on: http://review.coreboot.org/482 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2011-12-14k8: add CONFIG_K8_FORCE_2T_DRAM_TIMING and enable it for asus k8v-xFlorian Zumbiehl
Change-Id: Ia457f92f6fb7e287defb838db07f12d0f1766757 Signed-off-by: Florian Zumbiehl <florz@florz.de> Reviewed-on: http://review.coreboot.org/481 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2011-12-13Fix console output in real mode int10 implementation.Stefan Reinauer
Checking RBIL, int10 AH=0x10 does never output a character. The two output functions are AH=0x09 and AH=0x0e. Change-Id: Id7f4d260b63024748ef771f949e8b60f934bacbc Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/483 Tested-by: build bot (Jenkins) Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
2011-12-13Fix CMOS handling for non-USE_OPTION_TABLE configurationPatrick Georgi
The read_option macro still emitted CMOS_VSTART_*/CMOS_VEND_* symbols, which fail without an option table (as no option_table.h defines them). Discard them by using a macro instead of a static inline function. Change-Id: I8d001f971681277a344b6788725746491546b607 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/442 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-12-13Use MMCONF for all AMD family 10 CPUs.Marc Jones
This fixes problems in AP init when multiple APs are trying to access PCI config space. All Fam10 CPUs setup and support MMCONF. Change-Id: I00a25bbf4e4152c89024f14a3c4c1c36b48d0128 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: http://review.coreboot.org/455 Tested-by: build bot (Jenkins) Reviewed-by: Alec Ari <neotheuser@ymail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-12-08Change DSDT Table ID for M4A785T-M boardAlec Ari
Change the DSDT Table ID for M4A785T-M from M4A785-M to M4A785T-M. This fixes a small copypasta. This is an updated patch set. Change-Id: I43ee024222cf04d03685ffaee616971100cc9e6c Signed-off-by: Alec Ari <neotheuser@ymail.com> Reviewed-on: http://review.coreboot.org/474 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-12-08Fix ldscript for bootblock .rom sectionKyösti Mälkki
Allocation size for the section was miscalculated, so the section did not honour its upper-bound address. Also align the section start to 4 bytes, so it starts with code instead of pad bytes. Change-Id: Ic2a43981836a0873b50abecfcad2def7b6586a5d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/453 Tested-by: build bot (Jenkins) Reviewed-by: Alec Ari <neotheuser@ymail.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-12-06Fix AMD 8132 and 8151 southbridge buildsKyösti Mälkki
Untested, changes ramstage build for boards: supermicro/h8qme_fam10 amd/serengeti_cheetah amd/serengeti_cheetah_fam10 AMD 8132 was not built for any mainboard due to a typo. AMD Serengeti Cheetah: Chip 8151 is referenced in devicetree.cb but was not built. AMD Serengeti Cheetah Family10: There are indications the board has 8151, but it is not listed in the devicetree.cb. The 8151 chip is not added in the build. Change-Id: I03acdfcc3f3440bd32e81a9a696159903bbbcb50 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/471 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-12-05Bootblock does not need a unique boot_cpu()Kyösti Mälkki
Detection of a CPU being a BSP CPU is not dependent of the existence of northbridge and/or southbridge init code in the bootblock. Even if CONFIG_LOGICAL_CPUS==0, boot_cpu() can get executed on an AP CPU of a hyper-threading CPU and needs to return actual BSP bit from MSR. Change-Id: I9187f954bb357ba1dbd459cfe11cc96cb7567968 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/447 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-12-05RS780: print the vgainfoDenis 'GNUtoo' Carikli
With this commit the vgainfo is printed and looks like that on the serial console: vgainfo: ulBootUpEngineClock:50000 ulBootUpUMAClock:66700 ulBootUpSidePortClock:0 ulMinSidePortClock:0 ulSystemConfig:0 ulBootUpReqDisplayVector:0 ulOtherDisplayMisc:0 ulDDISlot1Config:0 ulDDISlot2Config:0 ucMemoryType:0 ucUMAChannelNumber:1 ucDockingPinBit:0 ucDockingPinPolarity:0 ulDockingPinCFGInfo:0 ulCPUCapInfo: 2 usNumberOfCyclesInPeriod:0 usMaxNBVoltage:0 usMinNBVoltage:0 usBootUpNBVoltage:0 ulHTLinkFreq:20000 usMinHTLinkWidth:8 usMaxHTLinkWidth:8 usUMASyncStartDelay:100 usUMADataReturnTime:300 usLinkStatusZeroTime:600 ulHighVoltageHTLinkFreq:20000 ulLowVoltageHTLinkFreq:20000 usMaxUpStreamHTLinkWidth:8 usMaxDownStreamHTLinkWidth:8 usMinUpStreamHTLinkWidth:8 usMinDownStreamHTLinkWidth:8 Change-Id: I17c2a13ab52a0f78588f812d4f42f45f9a7b7524 Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: http://review.coreboot.org/456 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-12-03adding support for the Asus K8V-XFlorian Zumbiehl
This pulls it all together and adds the real board-specific code. Confirmed to be working: - IDE - SATA - floppy - USB1.1 - USB2.0 - PS/2 keyboard - PS/2 mouse - serial - parport - sound - ethernet - PCI slots - AGP - powernow - fan speed monitoring - flashrom write Change-Id: Ifb97714c2f009d688be0ca3c38ddc01599ffd799 Signed-off-by: Florian Zumbiehl <florz@florz.de> Reviewed-on: http://review.coreboot.org/390 Reviewed-by: Rudolf Marek <r.marek@assembler.cz> Tested-by: build bot (Jenkins)
2011-12-03Fix Asus A8V-E SE DIMM slot mappingRudolf Marek
Fix the DIMM mappings, channel 0 is "B" on board, and secondary channel is on 0x51,0x53 Change-Id: I8c49c4efb90a4297aaea0be2159435dadab9ac0a Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Reviewed-on: http://review.coreboot.org/449 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-12-02make GPIOs and misc configurable via devicetreeFlorian Zumbiehl
Change-Id: I9f70da76b5ea451f28a1ad9252c5d879fc4fe315 Signed-off-by: Florian Zumbiehl <florz@florz.de> Reviewed-on: http://review.coreboot.org/387 Tested-by: build bot (Jenkins) Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
2011-12-02make INT[EFGH]# of vt8237 configurable as gpio via devicetreeFlorian Zumbiehl
Change-Id: I70202d81ddd1b0a00eddca4acabc621e5783e805 Signed-off-by: Florian Zumbiehl <florz@florz.de> Reviewed-on: http://review.coreboot.org/386 Tested-by: build bot (Jenkins) Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
2011-12-02copied asus a8v-e_se to k8v-xFlorian Zumbiehl
Change-Id: Ib66e8c5102ad45e73977a06aea109ed9544f4d08 Signed-off-by: Florian Zumbiehl <florz@florz.de> Reviewed-on: http://review.coreboot.org/389 Tested-by: build bot (Jenkins) Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
2011-12-02some black magic for initializing the old version of the k8t800Florian Zumbiehl
Change-Id: I1b5d23cee9f933aa090c9bd09890c7b335567e17 Signed-off-by: Florian Zumbiehl <florz@florz.de> Reviewed-on: http://review.coreboot.org/388 Tested-by: build bot (Jenkins) Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
2011-12-02implement usb2 termination and dpll delay setting for vt8237rFlorian Zumbiehl
Change-Id: I830c9a3daf5ac2e1ecd9a3e725a0b98f06509769 Signed-off-by: Florian Zumbiehl <florz@florz.de> Reviewed-on: http://review.coreboot.org/385 Tested-by: build bot (Jenkins) Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
2011-12-02i3100: Add HAVE_HARD_RESETSven Schnelle
and remove it from mainboard/intel/mtarvon, as this function is implemented in the southbridge code. Change-Id: Id3669aaf99b96b4a7a965f4957e5de7c365acaa6 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/469 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-12-02M4A785T-M: fix ACPI's P-States TableDenis 'GNUtoo' Carikli
Without that fix the linux kernel cannot change the frequency of the CPUs with cpufreq. Change-Id: Ie00e4b11b2561356952d8ae28bd0a00523b6d85f Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: http://review.coreboot.org/458 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-12-02Add ASUS M4A785T-M mainboard supportDenis 'GNUtoo' Carikli
This mainboard is very similar to the M4A785-M, but it has DDR3 instead of DDR2. That's why most of the code was copied or included from the m4a785-m directory Notable changes between the two mainboards include: * the selection of the last microcode (mc_patch_010000b6.h) which made it pass the CPU init. * the selection of DDR3 which made it pass the ram init This change was tested with the Trisquel 5.0 GNU/Linux distribution which uses the linux-libre version 2.6.38-12-generic The mainboard boots fine, however some special care is required for the onboard sound CODEC, and the onboard video chip: * the onboard sound CODEC(snd-hda-* has to be blacklisted), the issue is the same than the ASUS M4A785-M mainboard: It causes a flood of interupts which prevents booting * The internal video chip currently requires pci=nocrs, else the graphics are frozen as soon as the radeon module loads, and dmesg would print the following(the card only has 256M, and the mainboard was equiped with 2G of RAM): [ 3.674762] [drm] radeon: 3584M of VRAM memory ready [ 3.679863] [drm] radeon: 512M of GTT memory ready. instead of : [ 45.876088] [drm] radeon: 256M of VRAM memory ready [ 45.876089] [drm] radeon: 512M of GTT memory ready. * The screen(both VGA and HDMI) flickers at high resolution * Sometimes the computer freeze while changing the resolution (even the serial console stops responding) The following peripherals were tested: * The ath9k PCI wireless card was tested * The SATA hard disk works fine * the USB keyboard and mouse work fine * htop see 2 cores * serial port works under coreboot and GNU/Linux * power off and reboot works CPU frequency cannot be changed yet, this is addressed in a new commit. More detail are available here: http://www.coreboot.org/ASUS_M4A785T-M dmesg is available here: http://www.coreboot.org/pipermail/coreboot/2011-November/067604.html The mailing list thread on the graphic problem is here: http://www.coreboot.org/pipermail/coreboot/2011-November/067466.html Change-Id: I5df0bc1f9f0071b1e1ee7c8a356bf517aa8cf732 Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: http://review.coreboot.org/457 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-12-02Remove obsolete TINY_BOOTBLOCKKyösti Mälkki
Change-Id: I0edc69dc5f95cc32ee648eb094c9e5387f80db47 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/470 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-12-02Change AMD vendorcode buildKyösti Mälkki
Apply the normal method of recursively including subdirectories for src/vendorcode. Remove redundant references under mainboard and northbridge. Change-Id: I914a6e262ed2abe83f407df36fe5c1af5eb4bcb0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/468 Tested-by: build bot (Jenkins) Reviewed-by: Kerry Sheh <shekairui@gmail.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-12-01X60/T60: reset baudrate loglevel to sane valuesSven Schnelle
Change-Id: Iaf5861e9db0a41a184da6d2e515e3b9afe0655d6 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/459 Tested-by: build bot (Jenkins)
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-18 04:58:14 +0000