| Age | Commit message (Collapse) | Author |
|---|
|
Debug messages shown during IDE initialization are streamlined as
follows:
"Primary IDE interface" (and similar) are shortened to
"Primary interface".
We don't need to see "IDE" twice as messages are already prefixed.
Refactor "IDE: (Primary) IDE interface: (on)" into
"IDE: (Primary interface): (on)" to allow compiler to deduplicate
component strings, also used later in messages re UDMA/33.
This reduces uncompressed string size by 32 bytes and allows ramstage
to compress a wee bit better.
Change-Id: I16f5c2b3775c5a73b83d83817d7075e944089a12
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73331
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since it was the only super I/O in the serverengines folder, also drop
the parent folder.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I610c94bc100c9d5558da442b2847d8f26de07820
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77064
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Fix ethernet MAC address configuration. Currently, coreboot would
use ethernet_mac0 for both ports when setting the system's MAC
address. Instead, set the right device_index for the second controller
to pick up ethernet_mac1.
BUG=b:294856127
TEST=boot device and observe two different MAC addresses on the ethernet
ports.
Change-Id: I5ff6d62d2f837a120f7095f9b9aed487e6c5aee4
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77044
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add the RPL CPU power limits and system power limits based on
the suggestion of the thermal team for RPL SKUs.
The PL4 value suggested by the thermal team which is different from the reference document 686872.
BUG=b:292471206
BRANCH=firmware-brya-14505.B
TEST=built and booted into OS.
Change-Id: Ia030d13ca276c5e8340ae3b20d6e169bb162751d
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76769
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Bob Moragues <moragues@google.com>
|
|
Without setting these GPIO bits, you /can/ power on your board after
powering it down again. This includes after cutting the power.
The only way to recover from this is to pull the CMOS battery and cut
the power for 15mins. Then make sure you don't do this GPIO trickery or
you end up with the same state of basically an unresponsive "dead"
mainboard. So flash the chip before you pull the battery.
One small workaround I found when you like to flash from the system, is
to press the power button with 1 second after you enable power to the
board. In this small timeframe, apparently the superio chip didn't
intialise/restore/gets set with the settings that make it never want to
power on again. The other workaround is to connect the appriopriate
pins on the ATX power connector to force power to the mainboard.
Signed-off-by: Fabian Groffen <grobian@gentoo.org>
Change-Id: I4c9df200ba3ec5f315ad3d184588551d29fa68ce
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75212
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Use C99 flexible arrays instead of older style of one-element or
zero-length arrays.
It allows the compiler to generate errors when the flexible array does
not occur at the end in the structure.
Change-Id: I19c029968584fedbb6749e66c7ea2f74a7d580f4
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76811
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Copy jack detect GPIO config of NAMI variant, which uses the same
codec for the external jack/mic. The internal pull-up isn't needed,
and fixes issue of high CPU usage under Windows.
TEST=build/boot google/rammus, verify jack detect functional under
both Win11 and Linux 6.x, no high CPU usage from excessive interrupts.
Change-Id: Ifbe23a6b33343e54b43879a8971c7cb6475cf1f0
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76947
Reviewed-by: CoolStar <coolstarorganization@gmail.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Update eMMC DLL settings to prevent eMMC initialization error
BUG=b:290567342
TEST=warm/cold reboot stress test 2500 times pass
Change-Id: I418836ec3e2d2221c219eae35e2b22aeaacce4a5
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76823
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jamie Chen <jamie.chen@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
|
|
Update firmware to reflect schematics change for SD Card CLKSRC
from 7 to 6 for EVT board revision
BUG=b:291051683
TEST=emerge-rex coreboot
Change-Id: I3347f739650458c833d5a825742cf1d663853cc5
Signed-off-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77023
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Rui Zhou <zhourui@huaqin.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Once platform code has filled in the (legacy) ACPI PM register
map, added function will fill in the extended entries in FADT.
TEST=samsung/lumpy and amd/mandolin FADT stays unchanged.
Change-Id: I90925fce35458cf5480bfefc7cdddebd41b42058
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74913
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
The first platform samples came with IT8786E. The production units
switched to IT8784E in the final design.
Change the code to use IT8784E and reflect the proprietary firmware
configuration of the SIO chip.
TEST=Boot Ubuntu 22.04 on Protectli VP4670 (vault_cml) and dump the
configuration with superiotool and compare the configuration with
proprietary firmware.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I5dc6669b592484e445c8c4bbe95d73f0a9f0392e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74175
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
IT8784E is basically a IT8786E stripped from serial ports 3-6.
The patch creates a chip directory for IT8784E used by
protectli/vault_cml platforms.
TEST=Boot Ubuntu 22.04 on Protectli VP4670 (vault_cml) and dump the
configuration with superiotool and compare the configuration with
proprietary firmware.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ibe01358611f3ce3f155ddb01a7d177a3ff75765e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74174
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Add ramstage.c in Makefile.inc and update boxy power limits in
Boxy ramstage.c.
BUG=b:290293153
TEST=emerge-dedede coreboot and check psys and PLx value on boxy
Change-Id: I4257dab358f066ebd13b6f251e8a5258a72fbd39
Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76877
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use ARM architectual timer by initializing frequency to 13 MHz. Since
system timer is the source of the architectual timer, we also call
`timer_prepare` in `init_timer`.
BUG=b:229800119
TEST=run `suite:faft_bios` to verify the firmware stability.
check timestamps by cbmem.
Cq-Depend: chromium:4747539
Change-Id: I8b1348044e4c92984510604b7f61611e13284d86
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76919
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
All boards based on brya will have GFX devices to represent DRM
connectors in the kernel's /sys/class/drm/.
There should be no functional impact with or without this patch.
BUG=b:277629750
TEST=emerge-brya coreboot
Change-Id: I11afa9e8a1c8bf9f57bf6d195f07531182bd36f1
Signed-off-by: Won Chung <wonchung@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76873
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
To help identify the licenses of the various files contained in the
coreboot source, we've added SPDX headers to the top of all of the
.c and .h files. This extends that practice to Makefiles.
Any file in the coreboot project without a specific license is bound
to the license of the overall coreboot project, GPL Version 2.
This patch adds the GPL V2 license identifier to the top of all
makefiles in the device and soc directories that don't already have an
SPDX license line at the top.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I89c05c7c1c39424de2e3547c10661c7e3f58b8f7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76951
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Tim Crawford <tcrawford@system76.com>
|
|
To help identify the licenses of the various files contained in the
coreboot source, we've added SPDX headers to the top of all of the
.c and .h files. This extends that practice to Makefiles.
Any file in the coreboot project without a specific license is bound
to the license of the overall coreboot project, GPL Version 2.
This patch adds the GPL V2 license identifier to the top of all
makefiles in the mainboard directory that don't already have an SPDX
license line at the top.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ic451e68b1ad9ccdf34484dd98bd7fca7e177ef22
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68982
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Tim Crawford <tcrawford@system76.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
To help identify the licenses of the various files contained in the
coreboot source, we've added SPDX headers to the top of all of the
.c and .h files. This extends that practice to Makefiles.
Any file in the coreboot project without a specific license is bound
to the license of the overall coreboot project, GPL Version 2.
This patch adds the GPL V2 license identifier to the top of all
makefiles in the drivers directory that don't already have an SPDX
license line at the top.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I8442bc18ce228eca88a084660be84bcd1c5de928
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68980
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Tim Crawford <tcrawford@system76.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
To help identify the licenses of the various files contained in the
coreboot source, we've added SPDX headers to the top of all of the
.c and .h files. This extends that practice to Makefiles.
Any file in the coreboot project without a specific license is bound
to the license of the overall coreboot project, GPL Version 2.
This patch adds the GPL V2 license identifier to the top of all
makefiles in the cpu directory that don't already have an SPDX
license line at the top.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I3033f2a9eebc75220f7666325857b3ddd60c8f75
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68979
Reviewed-by: Tim Crawford <tcrawford@system76.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Select ENABLE_TCSS_USB_DETECTION for non-ChromeOS builds, to enable
booting from TCSS USB-C ports.
TEST=build/boot google/banshee, verify able to boot from all USB ports
using edk2 payload.
Change-Id: I998cc4a40950f43b4c511ead93ccc02c56c8367c
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76945
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Select ENABLE_TCSS_USB_DETECTION for non-ChromeOS builds, to enable
booting from TCSS USB-C ports.
TEST=build/boot google/drobit, verify able to boot from USB ports using
edk2 payload.
Change-Id: Ic6ab84dd5d1b980296eac043917d2cc7f14a5536
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76944
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Inspect all type-C USB ports, check if there is a USB device attached,
and if so, send the connection request to the PMC. This allows for any
attached USB2/USB3 devices to be used for booting by the payload.
Since this functionality is only needed by ChromeOS devices with TCSS
running upstream coreboot, introduce a new Kconfig to guard its use.
Boards needing it will select it in subsequent commits.
TEST=tested with rest of patch train
Change-Id: I69522dbcc8cae6bbf41659ae653107d0e031c812
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72909
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Variable 'i' is unsigned, so use %zu vs %zd.
Change-Id: I5f5b28796b30285e81a94c37e686a9e763cab204
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76943
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Similarly to te_relocate(), on success pe_relocate() should return 0.
It has never been an issue so far as pe_relocate() return value is not
tested.
Change-Id: I8e531662952d12e1f0ffa34042dab778ea602bfc
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76891
Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Anil Kumar K <anil.kumar.k@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Report CPU C10 state over eSPI so that the EC can use Virtual Wires to
detect if PECI can be used.
Change-Id: I301361f35caee8ba1c3fd9227219603897add92b
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76910
Reviewed-by: Jeremy Soller <jeremy@system76.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When lemp9 was converted to a variant in CB:64528, the Makefile was not
updated to handle the variant-specific `romstage.c`. This, as would be
expected, caused memory init errors and broke boot on CML-U boards.
Tested lemp9 boots to payload again.
Fixes: 5b7b04c938f2 ("mb/system76/cml-u: Convert lemp9 to a variant")
Change-Id: Ibc11d69a1662df653e6553421d67a9cd1b1d03e2
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76871
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
|
|
BUG=b:279097356
TEST=On dibbi:
- flash OS 15449.0.0 (where suspend is broken due to b:274531972)
- run `suspend_stress_test --count=1 --suspend_max=30 --suspend_min=28`
- check the AP wakes up immediately when the EC detects a sleep hang
Change-Id: I24a2aa5de1f76e6dd1c1ce726b648583756e5e55
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76938
Reviewed-by: Sam McNally <sammc@google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Add PLx from JSL PDG(ID: 613095) in boxy devicetree.
BUG=b:290293153
TEST=emerge-dedede coreboot and read correct value on boxy CPU log:
CPU TDP = 6 Watts, CPU PL4 = 60 Watts
Change-Id: I7b063dc235fb714ba47eb620b914f2f9e92a2715
Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76876
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
The prefix POSTCODE makes it clear that the macro is a post code.
Hence, replace related macros starting with POST to POSTCODE and
also replace every instance the macros are invoked with the new
name.
The files was changed by running the following bash script from the
top level directory.
header="src/soc/amd/common/block/include/amdblocks/post_codes.h \
src/include/cpu/intel/post_codes.h \
src/soc/intel/common/block/include/intelblocks/post_codes.h"
array=`grep -r "#define POST_" $header | \
tr '\t' ' ' | cut -d ":" -f 2 | cut -d " " -f 2`
for str in $array; do
splitstr=`echo $str | cut -d '_' -f2-`
grep -r $str src | cut -d ':' -f 1 | \
xargs sed -i'' -e "s/$str/POSTCODE_$splitstr/g"
done
Change-Id: Id2ca654126fc5b96e6b40d222bb636bbf39ab7ad
Signed-off-by: Yuchen He <yuchenhe126@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76044
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Add wifi sar table for craaskov
BUG=b:290739538
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot chromeos-bootimage
Change-Id: Ib21f674b6749e125bf76a196902c994bfac15e65
Signed-off-by: Jamie Chen <jamie_chen@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76576
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
_DSD "StorageD3Enable" property is needs to be set under the root
port in the DSDT or SSDT. The ACPI _DSD method is the preferred way
to opt D3hot support for storage devices.
This also bypasses the low LTR from SSD that blocking S0i2.2
LTR/latency SoC requirement.
Name (_DSD, Package () {
ToUUID("5025030F-842F-4AB4-A561-99A5189762D0"),
Package () {
Package (2) {"StorageD3Enable", 1},
// 1 - Enable; 0 - Disable
}
}
)
BUG=b:289028958
TEST=Check code compiles & boot rex, and verify the "StorageD3Enable"
SSDT entry.
Change-Id: I19decc2706954e73bc28fc2d9c3c4d18d2c384b7
Signed-off-by: Kangheui Won <khwon@chromium.org>
Signed-off-by: Sukumar Ghorai <sukumar.ghorai@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76835
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch configures external V1p05/Vnn/VnnSx rails for Craaskov
to follow best practices for power savings – untested though.
* Enable the external V1p05, Vnn, VnnSx rails in S0i1, S0i2, S0i3, S3,
S4, S5 , S0 states.
* Set the supported voltage states.
* Set the voltage for v1p05 and vnn.
* Set the ICC max for v1p05 and vnn.
BUG=b:290165011
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot
Change-Id: Ibaf6a285788e26688d3d42691ab40052ef6d6cdb
Signed-off-by: Rex Chou <rex_chou@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76926
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The DPTF parameters were verified by the thermal team.
Based on thermal table in 290705146#comment11.
Set "tcc_offset" = "8"
BUG=b:290705146
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot chromeos-bootimage
Change-Id: I2d9e1ad2e2fa98757d76578956101a482073885e
Signed-off-by: Van Chen <van_chen@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76712
Reviewed-by: John Su <john_su@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
To be consistent with other boards setting the keyboard backlight at
boot.
Change-Id: I40d8ebe468a967f0dfe1e82bff9c63f1986699c7
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76942
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This feature was originally present and then dropped, but turns out
that users prefer it. Set the backlight to 50% in romstage, back to
zero in ramstage; skip enabling on the S3 resume path.
TEST=build/boot google/eve, verify keyboard backlight turns on/off
as expected.
Change-Id: I33af888d614010538f69512bbd052ed2b83fcaa5
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76803
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Move the jack detect GpioInt resources under the codec (where they
belong), but also leave a copy under LPEA for since the Linux drivers
(incorrectly) require them there. Add pin list for Windows' SST driver.
Adapted from the Intel ValleyView edk2 ACPI reference code.
TEST=build/boot Win11, Linux on google/swanky; verify audio functional
OOTB under Linux, under Windows with coolstar's drivers.
Change-Id: I51c07013fc20f07d2fd3639f7fbc2af0e0e490a0
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76795
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: CoolStar <coolstarorganization@gmail.com>
|
|
- add HRV and GpioIO for coolstar's windows drivers
- fix interrupt type for TI jack detect switch
TEST=build/boot Win11, Linux on google/cyan; verify audio working
OOTB under Linux, under Windows with coolstar's audio drivers.
Change-Id: I6bf6bb9e9989ca8f42436800666d95dd05799838
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76800
Reviewed-by: CoolStar <coolstarorganization@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
Remove dummy SOUTH_BRIDGE_OPTIONS.
Change-Id: Ic2f10ef03844ff55addfa27035b54971ac41dbc9
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76949
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Remove dummy SOUTH_BRIDGE_OPTIONS.
Change-Id: Ifce7965040d96486ee8de2fba2ead9c54ee9a9f9
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76948
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Most of the components of this laptop are tested to work,
which is listed in the documentation.
Change-Id: Id8b3b7f735460c5e76a2dc9ab2d10154e6606ad6
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46630
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
The JPEG decoder, that was added many years ago to display a boot-
splash in coreboot, has a few quirks. People used to do some voodoo
with GIMP to convert images to the right format, but we can also
achieve the same with ImageMagick's `convert`. The currently known
constraints are:
* The framebuffer's color format is ignored,
* only YCC 4:2:0 color sampling is supported, and
* width and height have to be a multiple of 16 pixels.
Beside that, we can only display the bootsplash if it completely
fits into the framebuffer. As the latter's size is often decided
at runtime, we can't do much more than offering an option to set
a specific size.
Change-Id: I564e0d89fb46503ff4c11e095726616700009968
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76564
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Disable ASPM on ethernet, sd card, wwan, wlan, and ssd0 PCI devices.
This reduces kernel error logs such as:
[ 15.172613] r8169 0000:01:00.0: PCIe Bus Error: severity=Corrected,
type=Data Link Layer, (Transmitter ID)
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I7b1605f18a91ed20bfc6ab70547c415e0278d290
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74970
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Include multiple hash tables into relevant CBFS.
BUG=b:277292697
TEST=Ensure that all multiple hash tables are part of Myst BIOS image
with PSP verstage enabled.
Change-Id: I1601f4a01db5b2bbf8b5636ef9e69e41c1d9a980
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76589
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
On mainboards using Phoenix SoC with PSP verstage enabled, to
accommodate growing number of PSP binaries, multiple smaller hash tables
are introduced. Also some hash tables are in V2 format identifying the
concerned PSP binaries using UUID. Add SVC calls to support multiple
hash tables with different versions.
BUG=b:277292697
TEST=Build and boot to OS in Myst with PSP verstage enabled. Ensure that
all the hash tables are injected successfully. Ensure that PSP validated
all the signed PSP binaries using the injected hash tables successfully.
Change-Id: I64e1b1af55cb95067403e89da4fb31bec704cd4f
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76588
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Currently PSP verstage updates PSP bootloader with one unified hash
table containing hashes for all the signed PSP binaries to be validated.
With growing number of PSP binaries to validate and memory constraints
in PSP, there is a requirement to split and update the hash table into
multiple smaller chunks. Hence change the update_psp_fw_hash_table()
signature such that the hash tables are updated in a chipset specific
way.
BUG=b:277292697
TEST=Build and boot to OS in Myst with PSP verstage enabled. Build the
Skyrim BIOS image and confirm that the hash table is identical before
and after this change.
Change-Id: I75aac5bc5e7f61069be25d801d0838fdf565d3d1
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76587
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
As of OS/FW: 15276.0.0 - Skyrim is not able to wake from S1/standby.
The wake issue either needs to be fixed, or S1 should not be advertised
as a capability in the ACPI table.
Select ACPI_S1_NOT_SUPPORTED to indicate that ACPI state S1 is not
supported on Skyrim devices. This results in 'standby' being removed
from /sys/power/state.
BUG=b:263981434
TEST=suspend_stress_test
TEST=frostflow-rev2 ~ # cat /sys/power/state
freeze mem
Change-Id: I85fcdca34187a8c275cf5a93beb931dfb27a7c87
Signed-off-by: Tim Van Patten <timvp@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76863
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
C1-state auto demotion feature allows hardware to determine C1-state
as per platform policy. Since platform sets performance policy to
balanced from hardware, auto demotion can be disabled without
performance impact.
Also, disabling this feature results soc to enter PC2 and lower
state in camera preview case and save platform power.
Note: C1 demotion heuristics used EPB parameter to balance between power
and performance, i.e. low threshold when EPB is low in-order to get C1
demotion faster and vice-versa. ChromeOS operates at default EPB=0x7
(low EPB) in both AC/DC, so in DC mode it gets more C1 demotion hits
than expected (similar to AC mode) and losing power respectively.
BUG=b:286328295
TEST=Code compiles and correct value of c1-state auto demotion is
passed to FSP. Also verified PC residency improvement ~10% in
camera preview case.
Change-Id: I548e0e5340dec537d05718dd2f4652e10fb36ac0
Signed-off-by: Sukumar Ghorai <sukumar.ghorai@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76827
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Since all indirect data fabric register accesses will be non-broadcast
accesses that target a specific data fabric instance, the
cfg_inst_acc_en bit in the DF_FICAA_BIOS register will always be set
since that makes the indirect access target only a specific data fabric
instance.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I9aff01750c2c1e3506141b3ed293a980a64f8fac
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76885
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
FSP has a parameter to enable/disable c1-state autodemotion feature.
Boards/Baseboard can choose to use this feature as per requirement.
This patch hooks up this parameter to devicetree.
BUG=b:286328295
TEST=Check code compiles & boot google/rex, and correct value has been
passed to FSP.
Change-Id: I2cc60bd297271fcb3000c0298af71208e3be60fc
Signed-off-by: Sukumar Ghorai <sukumar.ghorai@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76826
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
USB DBC is very helpful for SoC debug. TraceHub needs to be enabled in
coreboot if debug consent == 2 or 4. Debug consent == 6 enables USB DBC without TraceHub enabled.
This patch updates the Kconfig help text to meet PlatformDebugOption in
MTL and changes debug consent to 6 in default to provide basic SoC
debug capability.
TEST=Boot to OS on screebo and DBC connection is OK.
Change-Id: Ic12528bdd8b1feda7f1b65045c863341f932d3a2
Signed-off-by: Kane Chen <kane.chen@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76880
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
commit 9a7a677 from opensbi project moved the fu540 platform to generic
code and commit 26998f3 from opensbi removed the old non generic
platform. Therefore opensbi platform needs to change to generic.
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: I76aa3d386936b331785a23edb8deb0d73609be47
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76688
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Tablet motion control is a function of the EC, and under Windows, the
TBMC device needs to be initialized after CREC, or driver init will
fail. The only way to ensure this happens is for TBMC to be a child
device under CREC.
TEST=build/boot Win11, Linux on google/eve, verify tablet mode drivers
loaded and orientation switching functional under both OSes.
Change-Id: I5e9eab9ae277b5a04dc2666960a727e5680bf6f4
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76792
Reviewed-by: CoolStar <coolstarorganization@gmail.com>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
cse_prep_for_rw_update() should return CB_ERR when
cse_data_clear_request fails. It was modified to CB_SUCCESS in this
commit ad6d3128f87c ("soc/intel/common: Use enum cb_err values")
BRANCH=None
BUG=None
TEST=Verify the system goes to recovery during downgrade when
cse_data_clear_request() fails.
Change-Id: Ibbccb827765afa54e5ab1b386fa46093b803977a
Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76918
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Enable config TME_KEY_REGENERATION_ON_WARM_BOOT for Intel Meteor
Lake SOCs. This config allows Intel FSP to programs TME engine to
generate a new key for each warm boot and exclude CBMEM region
from being encrypted by TME.
Bug=b:276120526
TEST= Boot up the system, generate kernel crash using following
commands:
$ echo 1 > /proc/sys/kernel/sysrq
$ echo "c" > /proc/sysrq-trigger
System performs warm boot automatically. Once it is booted,
execute following commands in linux console of the DUT and confirm
ramoops can be read.
$ cat /sys/fs/pstore/console-ramoops-0
S0ix also tested and found working.
Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com>
Change-Id: I3161ab99b83fb7765646be31978942f271ba1f9e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75627
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Add support for SD card reader GL9750 and RTS5227S
BUG=b:284273384
TEST=emerge-rex coreboot
Change-Id: I98aa0d3e52c355f6c1528c912a6fa0f32652dda8
Signed-off-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76912
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Rui Zhou <zhourui@huaqin.corp-partner.google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Add the new memory support:
Samsung K4U6E3S4AB-MGCL
BUG=b:294151054
BRANCH=firmware-dedede-13606.B
TEST=Run command "go run ./util/spd_tools/lp4x/gen_part_id.go JSL lp4x \
src/mainboard/google/dedede/variants/pirika/memory/ \
src/mainboard/google/dedede/variants/pirika/memory/\
mem_parts_used.txt"
Change-Id: Ief9bbf11fc05c8155f1da7188926a29dbbfbe488
Signed-off-by: Daniel_Peng <Daniel_Peng@pegatron.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76542
Reviewed-by: Daniel Peng <daniel_peng@pegatron.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Shou-Chieh Hsu <shouchieh@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Remove dummy CPU_SPECIFIC_OPTIONS.
Change-Id: I267b2a7c6dfc887b572e1b63b0f59fbfa4d20f0e
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76681
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I9241d713fb8cc26c768746c8e442b46292036d20
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76694
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I35742721e049102a3e153b857824073a5d257cc3
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76693
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ia4011a0f29d360fbe46a5e052e2acb3d23d8ceaf
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76695
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I5d9133f2255a96c8367f69dcbb198a1a142cdb82
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76696
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Change-Id: I5ad1a1bf51bb7a451239252f01a90c1d4d94ba49
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76685
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Iea0e55c6c55635976dad0422470f3927bdc26e35
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76683
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Change-Id: Id268943b9347fdb54e07b55c0a2a18ac77bb3a58
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76682
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Change-Id: Ic384ee804e217ba79f7e191f122ec61565abfc40
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76697
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Change-Id: I915e0e942adf33175fdc9fe055fce013824d6c0f
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76698
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I4ccb8d38f18cb440f54723cc1f29e25b82dac8ee
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76700
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add pirrha supported memory parts in mem_parts_used.txt, generate
SPD IDs for them.
1. K3KL8L80CM-MGCT (Samsung)
2. K3KL6L60GM-MGCT (Samsung)
BUG=b:292134655
BRANCH=nissa
TEST=FW_NAME=pirrha emerge-nissa coreboot chromeos-bootimage
Change-Id: Ib3f5a5e5c8296f976d92f0196026d7bb63845664
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76881
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Set UPD params GenerateNewTmeKey, TmeExcludeBase, and TmeExcludeSize
when TME_KEY_REGENERATION_ON_WARM_BOOT config is enabled. These UPDs
are programmed only when INTEL_TME is enabled.
Bug=b:276120526
TEST=Able to build REX platform.
Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com>
Change-Id: Ib8d33f470977ce8db2fd137bab9c63e325b4a32d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75626
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Merge TME_KEY_REGENERATION_ON_WARM_BOOT and
TME_EXCLUDE_CBMEM_ENCRYPTION config options under new config option
named TME_KEY_REGENERATION_ON_WARM_BOOT.
Program Intel TME to generate a new key for each warm boot. TME always
generates a new key on each cold boot. With this option enabled TME
generates a new key even in warm boot. Without this option TME reuses
the key for warm boot.
If a new key is generated on warm boot, DRAM contents from previous
warm boot will not get decrypted. This creates issue in accessing
CBMEM region from previous warm boot. To mitigate the issue coreboot
also programs exclusion range. Intel TME does not encrypt physical
memory range set in exclusion range. Current coreboot implementation
programs TME to exclude CBMEM region. When this config option is
enabled, coreboot instructs Intel FSP to program TME to generate
a new key on every warm boot and also exclude CBMEM region from being
encrypted by TME.
BUG=b:276120526
TEST=Able to build rex.
Change-Id: I19d9504229adb1abff2ef394c4ca113c335099c2
Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76879
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add more details to instruct future boards/models implementers regarding
how GFX devices should be added.
If HDMI and DP connectors are enumerated by the kernel in
/sys/class/drm/ then corresponding GFX device should be added to ACPI.
It is possible that some connectors do not have dedicated ports, but
still enumerated.
The order of GFX devices is DDIA -> DDIB -> TCPX.
BUG=b:277629750
TEST=emerge-brya coreboot
Change-Id: I59e82ee954a7d502e419046c1c2d7a20ea8a9224
Signed-off-by: Won Chung <wonchung@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76776
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
|
|
Add override devicetree based on schematics(ver. 20230714).
BUG=b:290248526
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot
Change-Id: Id002282d91dc94b00f5d133203b62ca39d6cae6d
Signed-off-by: Rex Chou <rex_chou@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76662
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Build issue introduced by patch CB:76418 (commit hash
01025d3ae78e02192d389f22abd36747e3d8c63b) for Google boards.
Patch has not been rebased to latest master and tested before
submission causing the Jenkins jobs to fail.
Change-Id: I95bd2485b98be4ab3a39eaaebb9efb34db93bbe8
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76915
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Introduce new symbol SOC_INTEL_RAPTORLAKE_PCH_S that can be selected
by board with RPL-S PCH.
For now only the IoT variant of RPL-S FSP is available for use with
700 series chipsets. Boards with 600 series chipsets can still use
RPL CPUs with the ADL-S C.0.75.10, which contains minimal RPL-S CPU
support.
Change-Id: I303fac78dac1ed7ccc9d531a6c3c10262f7273ee
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76322
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Kopeć <michal.kopec@3mdeb.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Only the headers on Intel FSP repository have the CnviWifiCore
present. Options guarded for RPL like: DisableDynamicTccoldHandshake
or EnableFastVmode and IccLimit is also supported by all public FSPs
(except ADL-N for the handshake).
Options like LowerBasicMemTestSize and DisableSagvReorder have to be
guarded when FSP_USE_REPO is not selected, as publci FSPs do not have
these options.
Use FSP_USE_REPO instead of/in addition to SOC_INTEL_RAPTORLAKE
as dependency on the guarded UPDs to make them available for FSPs
that support them as well. Also prioritize the headers from FSP repo
over vendorcode headers if FSP_USE_REPO is selected.
Change-Id: Id5a2da463a74f4ac80dcb407a39fc45b0b6a10a8
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76418
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Kopeć <michal.kopec@3mdeb.com>
|
|
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I406b9b470d6e76867e47cfda427b199e20cc9b32
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76293
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
If ACPI is above 4G it's not possible to have a valid RSDT pointer in
RSDP, therefore swap RSDT and XSDT. Both are always generated on x86.
On other architectures RSDT is often skipped, e.g. aarch64. On top of
that the OS looks at XSDT first. So unconditionally using XSDT and not
RSDT is fine.
This also deal with the ACPI pointer being above 4G. This currently
never happens with x86 platforms.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I6588676186faa896b6076f871d7f8f633db21e70
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76000
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This makes sure google/ovis don't get a random mac address on boot.
Additionally, program the LAN WAKE GPIO properly as per the Ovis
schematics dated July'23.
BUG=b:293905992
TEST=Verified on google/ovis that able to get the fixed MAC address across the power cycles.
Change-Id: I699e52e25f851de325f96ef885e04d15ca64badd
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76872
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: Ic1533cb520a057b29fc8f926db38338cd3401b18
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76295
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I4e5032fd02af7e8e9ffd2e20aa214a8392ab6335
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76070
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I9e6544c956cb3d516d2e5900357af9ae8976cc8e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76131
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
TESTED acpixtract -a is able to extract all the dumped tables including
FACS and DSDT.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I7fad86ead3b43b6819a2da030a72322b7e259376
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76350
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Arm needs very little of FADT. Just a HW reduced model bit and low power
idle bit set.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I197975f91cd47e418c8583cb0e7b7ea2330363b2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76180
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I84ab0068e8409a5e525ddc781347087680d80640
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76179
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Add supported memory parts in the mem_parts_used.txt and generate the
SPD ID for Samsung K4U6E3S4AB-MGCL.
BUG=b:293240969
TEST=emerge-dedede coreboot
Change-Id: I92a1f2110e74b5d25572e0e86e04b5b32112c1f5
Signed-off-by: tongjian <tongjian@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76866
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Configure GPIOs based on schematics and confirm with EE.
BUG=b:290248526
BRANCH=None
TEST=emerge-nissa coreboot
Change-Id: I17fc9333a0ef592ea36b196b3fd417be47fb82bb
Signed-off-by: Rex Chou <rex_chou@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76636
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
1. Joxer uses dptf.dv to distinguish 6W/15W by setting OEM variable.
2. Update passive policy and critical policy.
BUG=b:285477026, b:293540179
TEST=emerge-nissa coreboot and check the OEM variable.
Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com>
Change-Id: I4e52ac624f7d7628cce3035a2bac67fc527bc167
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76773
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Ivan Chen <yulunchen@google.com>
|
|
It's not expected that non-x86 arch implement x86 style sleep states and
resume.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I7a1f36616e7f6adb021625e62e0fdf81864c7ac3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76178
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Select this Kconfig to ensure the PSP_ADD_MSR is properly programmed
across all cores.
This resolves a Windows BSOD "CRYPTO_LIBRARY_INTERNAL_ERROR."
BUG=b:293571109
BRANCH=skyrim
TEST=build/boot google/skyrim, use rdmsr to verify MSR value identical
across all cores.
Change-Id: I67391b49496d767912f5d81c1758a52a70fca6f6
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76809
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
It is already selected here device/dram/Makefile.inc
Change-Id: I32a1ecc4e0f90725f9356158ce2978502b590d5c
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76390
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use C99 flexible arrays instead of older style of one-element or
zero-length arrays.
It allows the compiler to generate errors when the flexible array does
not occur at the end in the structure.
Change-Id: Ideed4b333632df5068b88dde6f89d3831e3046d1
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76840
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
In the datasheet of ILI9882T [1] section 3.11 Power On/Off Sequence,
the TReset-CMD (Reset to First Command in Display Sleep In Mode) should
be larger than 10ms, but it's 1.1ms now. This may cause abnormal
display as some commands may be lost during power on. Fix this and
leave some margins by increasing TReset-CMD to 20ms. Also, to align
with the kernel driver structure starry_ili9882t_init_cmd, add 20ms
delay at the end of command.
[1] ILI9882T_Datasheet_20220428.pdf
BUG=b:293380212
TEST=Boot and display normally
Signed-off-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com>
Change-Id: Ifdcaf0e34753fc906817c763f1c8e7389448d1dc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76766
Reviewed-by: cong yang <yangcong5@huaqin.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Use C99 flexible arrays instead of older style of one-element or
zero-length arrays.
It allows the compiler to generate errors when the flexible array does
not occur at the end in the structure.
Change-Id: Iad9cbe16a2d1881d74edcc702be843168df8a4ff
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76846
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Use C99 flexible arrays instead of older style of one-element or
zero-length arrays.
It allows the compiler to generate errors when the flexible array does
not occur at the end in the structure.
Change-Id: I16ac584781214350355e0625f8a2eca39a37cf85
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76841
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Use C99 flexible arrays instead of older style of one-element or
zero-length arrays.
It allows the compiler to generate errors when the flexible array does
not occur at the end in the structure.
Change-Id: I81ae8acb0365af102e513b3d7cfa1a824636eb06
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76812
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use C99 flexible arrays instead of older style of one-element or
zero-length arrays.
It allows the compiler to generate errors when the flexible array does
not occur at the end in the structure.
Change-Id: I3d5838b825c6ac2a2959388381004993024081c3
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76813
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use C99 flexible arrays instead of older style of one-element or
zero-length arrays.
It allows the compiler to generate errors when the flexible array does
not occur at the end in the structure.
Change-Id: I2d65e9dbefc8fa5d8288151995a587f76049c65a
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76837
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Use C99 flexible arrays instead of older style of one-element or
zero-length arrays.
It allows the compiler to generate errors when the flexible array does
not occur at the end in the structure.
Change-Id: Id19193b960935eeffca8e8db60073321592368fe
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76836
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use C99 flexible arrays instead of older style of one-element or
zero-length arrays.
It allows the compiler to generate errors when the flexible array does
not occur at the end in the structure.
Change-Id: Iab55c57ee5cac60911c9fe4cee8d86a252bde372
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76839
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use C99 flexible arrays instead of older style of one-element or
zero-length arrays.
It allows the compiler to generate errors when the flexible array does
not occur at the end in the structure.
Change-Id: I3ab3538b276fee5ed135bb4e88d9ef2cd6a00bb9
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76843
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
