summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2019-10-20cbmem: Add IDs for TSEG and BERT table dataMarshall Dawson
Prepare for products that can use any DRAM for TSEG. Include an ID for data pointed to by an ACPI BERT table. This region's only requirement is it is marked reserved. Change-Id: Ia6518e881b0add71c622e65572474e0041f83d61 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36115 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-20soc/amd/picasso: Adjust I2C ASLMarshall Dawson
Clarify names as I2C2, etc. Use iomap.h defines for base addresses. Update IRQs. Change-Id: I3800592e4b0bcb681d0dcf24f69e269f845be025 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34915 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-10-20soc/amd/picasso: Update iomapMarshall Dawson
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Change-Id: Ieedc2062948a0d1563f82e4d0b1ca9c5bc3291a9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/33991 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-20soc/amd/picasso: Update UARTsMarshall Dawson
Add a function to uart.c to ensure the right IOMux settings are programmed for the console UART. Update Kconfig to reflect the new addresses. Give the user the ability to downclock the UARTs' refclock to 1.8342MHz. Add the abiltiy to use an APU UART at a legacy I/O address. Update the AOAC register configuration for the two additional UARTs. Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Change-Id: I74579674544f0edd2c0e6c4963270b442668e62f Reviewed-on: https://review.coreboot.org/c/coreboot/+/33767 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-10-20soc/amd/picasso: Add display identification and vbios nameMarshall Dawson
Add Picasso's Device ID and default filename. Only a single Device ID is documented for Picasso so remove the oprom remapper function. Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Change-Id: Iaf43d7c8da41beb05b58c494f0a6814f8f571b18 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34422 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-20soc/amd/picasso: Remove unused SATA configurationsMarshall Dawson
Picasso's SATA controller operates only in AHCI mode. Remove the Kconfig symbols previously used to select between other possibilities. Change-Id: Iaeb8b4a2540e976d2e7361faf8c6d261e60398fd Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36113 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-10-20soc/amd/picasso: Remove SATA from AOAC registersMarshall Dawson
SATA is no longer defined in AOAC so remove its definitions. Change-Id: Ief0ab6b5f69f2d17c11d8e2ee40941ac56c077f6 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36112 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-10-20soc/amd/picasso: Update southbridgeMarshall Dawson
Picasso's FCH has many similarities to Stoney Ridge, so few changes are necessary. The most notable changes are: * Update the index values for the C00/C01 interrupt routing * FORCE_STPCLK_RETRY is not present * PCIB is not defined * FCH MISC Registers 0xfed80e00 numbering has changed * C-state base moves from PM register to MSR * Add option to determine the intended MUX settion for LPC vs. eMMC * Remove the LEGACY_FREE option Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Change-Id: I69dfc4a875006639aa330385680d150331840e40 Reviewed-on: https://review.coreboot.org/c/coreboot/+/33770 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-10-20soc/amd/common: Add AcpiMmio access for SMBus PCI deviceMarshall Dawson
The standard PCI register space for D14F0 is accessible at 0xfed80000. Add functions for use as helpers. Change-Id: Icbf5bdc449322c3f5e59e6126d709cb2808591d5 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34914 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-10-20soc/amd/common/lpc: Add SuperIO decode functionMarshall Dawson
The LPC-ISA bridge supports two ranges for SuperIO control registers. Add a generic function to allow a mainboard to enable the appropriate range. Provide #define values that are more descriptive than the register's field names. Change-Id: Ic5445cfc137604cb1bb3ee3ea4c3a4ebdb9a9cab Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35271 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-20soc/amd/picasso: Update for USB3.1Marshall Dawson
Change to the appropriate device IDs. Remove the ehci resource call. Remove overcurrent settings, as this will be passed to AGESA in later change. Remove unused USB2 ACPI name assignment. Change-Id: Ic287a05b30ca03e3371cc4a30aaa93b236c6d3fb Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34420 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-10-20soc/amd/picasso: Update all PSP and amdfw.rom buildingMarshall Dawson
Add Kconfig options and Makefile command line options to generate the amdfw.rom image. A new intermediate image is introduced, which is the initial BIOS image the PSP places into DRAM prior to releasing the x86 reset. The amd_biospsp.img is a compressed version of the romstage.elf program pieces. Additional details of the PSP items are not public information. See NDA document PID #55758. Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Change-Id: Ib5e393e74ed60e968959012b6275686167a2d78a Reviewed-on: https://review.coreboot.org/c/coreboot/+/33764 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-10-20superio: Use 'include <stdlib.h>' when appropriateElyes HAOUAS
Change-Id: I55e7b680e128f29a9fd549edfb676e6571330677 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32830 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-10-20superio: Remove unused include <device/smbus.h>Elyes HAOUAS
Change-Id: Ic8a28493c386c0097dbf3478e6d046fdfbf28724 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35996 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-10-20security/memory: Add x86_64 supportPatrick Rudolph
Fix compiler warning by adding an additional check for the fastpath memset. Change-Id: I9a80438995bafe7e436f3fe2180b8c9574eeff23 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35682 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-20mb/lenovo/x200: Add ThinkPad X301 as a variantBill XIE
It is similar to X200s, with U-series CPU, slightly different gpio setup, no docking support, and no superio chip. Tested: - CPU Core 2 Duo U9400 - Slotted DIMM 4GiB*2 from samsung - Camera - pci-e slots - sata and usb2 - libgfxinit-based graphic init - NVRAM options for North and South bridges - Sound - Thinkpad EC - S3 - Linux 4.19.67-2 within Debian GNU/Linux stable, loaded from Linux payload (Heads) and Seabios. TODO: repurpose and/or rename flag H8_DOCK_EARLY_INIT (introduced in CB:4294 ) for h8-using devices without a dock. Change-Id: Ic6a6059ccf15dd2e43ed4fc490c1d3c36aa1e817 Signed-off-by: Bill XIE <persmule@hardenedlinux.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36093 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-10-19mb/lenovo/x201/dock.c: Use common southbridge gpio codeArthur Heymans
Change-Id: I885f57f68e30c2a641e84655dc7ea9da141fb83f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36128 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-19mb/lenovo/x200/dock.c: Use common southbridge gpio codeArthur Heymans
Change-Id: I5b527a23aa0b0038936bb4b77176331fdfd6d914 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36127 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-10-18mb/google/octopus: Create Dood variantTim Chen
This commit creates a dood variant for Octopus. The initial settings override the baseboard was copied from variant bobba. BUG=b:141960652 BRANCH=octopus TEST=emerge-octopus coreboot Change-Id: Id8852e1f04f4356fac5445f6da6d56d430c88ad0 Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35768 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Martin Roth <martinroth@google.com>
2019-10-18src: Remove unused include '<device/pci_ids.h>'Elyes HAOUAS
Change-Id: Ic90dcff9d0b49a75a26556e4a1884a2954ef68f6 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36063 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-18build: Mark bootblock files on x86 as IBBPatrick Rudolph
* Add cbfsoption --ibb to mark files as IBB * Will be used by "Legacy FIT TXT" boot Change-Id: I83313f035e7fb7e1eb484b323862522e28cb73d4 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31497 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2019-10-18util/cbfstool: Add optional argument ibbPhilipp Deppenwiese
* Mark files in CBFS as IBB (Initial BootBlock) * Will be used to identify the IBB by any TEE Change-Id: Idb4857c894b9ee1edc464c0a1216cdda29937bbd Signed-off-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29744 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-18soc/intel/common: lpc/espi: fix wrong lock bitMichael Niewöhner
This corrects the LPC/eSPI lock bit from bit 2 to bit 1 in accordance with doc#332691-003EN and doc#334819-001. Change-Id: I45335909b1f2b646e4fafedd78cb1aaf7052d60c Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36100 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-10-18superio/nuvoton/nct5539d: Add nuvoton NCT5539D specific superio.aslPavel Sayekat
This port is based on NCT6776 Change-Id: Ib8d64e8faa74802ab0213d87881e57d4d9bd1c35 Signed-off-by: Pavel Sayekat <pavelsayekat@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35028 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-18mb/facebook/fbg1701: Add Kingston B511ECMDXGGB memory supportFrans Hendriks
FBG-1701 revision 1.3 will use Kingston onboard memory. Add Kingston SPD file. When Samsung memory configuration is disabled use cpld_read_pcb_version() for using correct SPD data. BUG=N/A TEST=Boot and verified on Facebook FBG-1701 revision 1.3 Change-Id: I2e1d1b933d5a49a7005685ed530c882429019027 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35792 Reviewed-by: Wim Vervoorn Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-18superio/smsc: Restore sio1036Marshall Dawson
Change d3a1a417 "src/superio: Remove unused superio chips" removed all unused devices except for ones used on mainboards still under review. The SMSC 1036 was inadvertenly also removed as well. This device is used in debug cards that may be connected to AMD CRBs. This patch restores the smsc1036 directory as-is and then corrects the following lint messages. * WARNING: Prefer 'unsigned int' to bare use of 'unsigned' * ERROR: else should follow close brace '}' * WARNING: braces {} are not necessary for single statement blocks Change-Id: I851826e12032f802b9b2ff86d5a0eb99871bee6d Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36119 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-18mb/facebook/fbg1701: separate cpld supportWim Vervoorn
Move all code involving the cpld to a single file. Rename mainboard_read_pcb_version() to cpld_read_pcb_version(). BUG=N/A TEST=tested on fbg1701 board Change-Id: I9ee9a2c605e8b63baa7d64af92f45aa07e0d9d9e Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36095 Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-18mb/google/hatch/var/dratini: Update DPTF parametersWisley Chen
The change applies the DPTF parameters. BUG=b:142849037 TEST=build and verified by thermal team Change-Id: I5da8d373f38d23929ffec95bc1c9e942f131297f Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36098 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-10-18soc/mediatek/mt8183: Compress calibration blob with LZ4Hung-Te Lin
The DRAM calibration blob can be compressed using pre-RAM algorithm (currently LZ4), which will save ~12ms in boot time. On Kodama, boot time difference: Before: 1,082,711 After: 1,070,309 BUG=b:139099592,b:117953502 TEST=build and boot, cbfstool coreboot.rom print -v (see dram compressed) BRANCH=kukui Change-Id: Ic3bd49d67ee6f80a0e4d8f6945744642611edf64 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36054 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-10-18mb/google: Shrink GBB section sizeHung-Te Lin
Chrome OS firmware images have moved bitmap resources from GBB into CBFS for a long time, so the GBB should only hold firmware keys and HWID, that is usually less than 10k. ARM boards usually limit GBB to 0x2f00 (see gru, cheza and kukui) but many recent x86 simply copy from old settings and may run out of space when we want to add more resources, for example EC RO software sync. Note, changing the GBB section (inside RO) implies RO update, so this change *must not* be cherry-picked back to old firmware branches if some devices were already shipped. BRANCH=none BUG=None TEST=make # board=darllion,hatch,kahlee,octopus,sarien Change-Id: I615cd7b53b556019f2d54d0df7ac2723d36ee6cf Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36088 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Mathew King <mathewk@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-10-18mb/siemens/mc_apl{3,5}: Remove __weak symbol from GPIO functionsWerner Zeh
The two GPIO functions variant_gpio_table() and variant_early_gpio_table() provide the pointer to the variants GPIO table for late and early GPIO init. As these functions are variant dependent the keyword __weak must not be used as otherwise the linker might choose the tables from the baseboard. This patch removes the __weak definition making these functions overriding the general ones in baseboard/gpio.c. Change-Id: Ic7fc816d40cb112d7ab51089c3962a77798c08a8 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36094 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-18soc/mediatek/mt8183: Pass impedance data as a function argumentYu-Ping Wu
To make data flow more explicit, global variable 'impedance' is replaced with a local variable, which is passed as a function argument. BUG=none BRANCH=kukui TEST=Krane boots correctly Change-Id: I0f6dacc33fda013a3476a10d9899821b7297e770 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35766 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-10-18soc/mediatek/mt8183: Run calibration with multiple frequencies for DVFS switchHuayang Duan
The patch adds config MT8183_DRAM_DVFS to enable DRAM calibration with multiple frequencies to support DVFS switch. BUG=b:80501386,b:142358843 BRANCH=kukui TEST=Boots correctly on Kukui Change-Id: I97c8e513dc3815a2d62b2904a246a1d8567704a4 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35555 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-10-18soc/mediatek/mt8183: Adjust DRAM voltages for each DRAM frequencyHuayang Duan
This patch supports voltage adjustment for each DRAM frequency, which is neccesary to support DVFS switch. BUG=b:80501386,b:142358843 BRANCH=none TEST=Boots correctly and stress test pass on Kukui. Change-Id: I9539473ff708f9d0d39eb17bd3fdcb916265d33e Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35017 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-10-18soc/mediatek/mt8183: Allow modifying vddq voltageHsin-Hsiung Wang
DRAM DVFS needs to be calibrated with different vddq voltages to get correct parameters. A new API is added to allow changing vddq voltage. BUG=b:80501386 BRANCH=none TEST=measure vddq voltage with multimeter Change-Id: I5f0d82596a1709bf0d37885f257646133f18f210 Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35147 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-18soc/mediatek/mt8183: Allow modifying vdram1 voltageHsin-Hsiung Wang
DRAM DVFS needs to be calibrated with different vdram1 voltages to get correct parameters. A new API is added to allow changing vdram1 voltage. BUG=b:80501386 BRANCH=none TEST=measure vdram1 voltage with multimeter Change-Id: Ia15ab3a2e1668e5b4873d317b57a38ebee037709 Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33186 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-18soc/mediatek/mt8183: Share console for calibration blob outputHung-Te Lin
Most coreboot debug messages are sent to UART and cbmem console, and we also want to collect DRAM calibration module output, especially for cbmem console (so we can see the logs after kernel is up). Instead of sharing whole cbmem/cbtable/cbmemconsole implementations, we want to simplify that by a simple function pointer so output can be preserved by do_putchar, which internally sends data to all registered consoles (usually cbmem console and UART). BUG=b:139099592 TEST=make; boots properly for full-k, with and without serial console. BRANCH=kukui Change-Id: I1cf16711caf3831e99e17b522b86694524425116 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36056 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-17cpu/amd/{agesa,pi}: Select NO_FIXED_XIP_ROM_SIZEArthur Heymans
AGESA and binaryPI set the whole CACHE_ROM_SIZE to WRPROT during the romstage and do not reference the CONFIG_XIP_ROM_SIZE symbol. Change-Id: I548b9c9066d825c2f03749353b9990b2efddfd9c Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35825 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-10-17mb/lenovo/x201: Add VBOOT supportArthur Heymans
Tested with CONFIG_H8_FN_KEY_AS_VBOOT_RECOVERY_SW to switch between RW_A and recovery, which works quite well as a developer mode to test RW_A with the COREBOOT slot as a fallback. Change-Id: I9d524988e991457032f63a947606d1b3581de5e7 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35959 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-10-17nb/intel/nehalem/vboot: Ignore invalid POSTINIT on TPM startupArthur Heymans
During the raminit the CPU gets reset but the platform does not. To deal with TPM init failure (a TPM can only be started up once) ignore the invalid POSTINIT return code. Change-Id: Ib15e796914d3e6d5f01b35fa46b3ead40f56122b Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36055 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-17security/tpm: Add a Kconfig to disregard INVALID_POSTINIT on startupArthur Heymans
There are use cases where TPM has already been set up in a previous stage, e.g. TXT or when a CPU reset without a platform reset happens. If this is the case the TPM startup will return a INVALID_POSTINIT (return code 0x26). This adds a Kconfig to allow platforms to disregard that return code. Change-Id: I238b30866f78608c414de877b05a73cf8fdb9bbd Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36027 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-10-17soc/mediatek/mt8183: Verify checksum of cached calibration dataYu-Ping Wu
The checksum is stored in the header of calibration data and saved to SPI flash. After reading the data from flash, checksum is used to verify the integrity of the calibration parameters. BUG=b:139099592 BRANCH=kukui TEST=Calibration data successfully loaded from flash Change-Id: Ie4a0688ed6e560d4c0c6b316f44e52fd10d71a9d Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36014 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-10-17soc/mediatek/mt8183: Remove unnecessary DRAM register settingsYu-Ping Wu
In broadcast mode we only need to set registers for channel 0 instead of all channels. BUG=none BRANCH=kukui TEST=emerge-kukui coreboot Change-Id: I22a4b69fd40d1978fa7b12e8edaba00ce5d7787d Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36075 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-10-17soc/mediatek/mt8183: Fix DDR phy config numberYu-Ping Wu
Some typos are fixed to make DVFS switch work. BUG=b:142358843 BRANCH=kukui TEST=emerge-kukui coreboot Change-Id: I064d4a2c46187ac5780352da742bd56e82c22c14 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36074 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-10-17soc/mediatek/mt8183: Refactor DRAM init by bit fields APIHung-Te Lin
Replace the magic clrsetbits_le32, read32, write32 by SET_BITFIELDS and other bit field helpers. Change-Id: I327297dd10718fbef7275fe95c95d00d3ab6ac84 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35471 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-17soc/mediatek/mt8183: Improve code formattingYu-Ping Wu
This patch contains some minor changes including: - Use lowercase hex literals - Combine short lines - Remove unnecessary curly braces - Simplify struct initialization - Leverage macro _SELPH_DQS_BITS - Ensure whitespaces around binary operators - Remove extra whitespaces after commas - Change log level and remove unnecessary debug logs BUG=none BRANCH=kukui TEST=emerge-kukui coreboot Change-Id: I33616e6142325920c2fd7e6dc1dc88eb29c5cf34 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36011 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-10-17soc/mediatek/mt8183: Handle memory test failureYu-Ping Wu
If DRAM calibration fails or mem test fails using the cached calibration results stored in flash, rerun DRAM full calibration. If partial calibration fails or the mem test following it fails, hang forever. Partial calibration acts as a fallback approach in case of full calibration failure. Therefore, if it fails, there would be no other ways to initialize DRAM. Instead of falling into reboot loop and draining out of battery, it is better to just hang so that the end user may notice that and send to RMA. BUG=b:80501386,b:139099592 BRANCH=kukui TEST=Boots correctly on Kukui Change-Id: I8e1d4f5bc7b45f45a8bfef74e86ec0ff6a556af4 Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35481 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-17nb/intel/nehalem: Only enable_smbus onceArthur Heymans
This is already done in nb/intel/nehalem/romstage.c. Change-Id: I2dc34af874ac96af31ca9ebe6a43b2805da32d18 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36039 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-10-17nb/intel/nehalem: use pmclib to detect S3 resumeArthur Heymans
During the raminit the CPU gets reset, so reprogram those bits in PM1_CNT such that the CPU remains aware that this is a S3 resume path after the reset. Change-Id: I8f5cafa235c8ab0d0a59fbeeee3465ebca4cc5d0 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36038 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-10-17nb/intel/nehalem: Add some debug outputArthur Heymans
Change-Id: Icbdada0a8cdbcface5124a5f9ebd3d667c376902 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36037 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-10-17nb/intel/nehalem: Change the output verbosity of raminit timingsArthur Heymans
This decreases the output verbosity of RAM_DEBUG to be useful. Change-Id: I9fa681303da0e063dd2ca789d7711151b2365f16 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36036 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-16mb/google/hatch/akemi: Tune I2C bus 1 clockPeichao Wang
Tune I2C bus 1 clock and insure it meets I2C spec. BUG=b:142683257 TEST==flash coreboot to the DUT and measure I2C bus 1 clock frequency less than 400KHz Signed-off-by: Peichao.Wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: Id4cdbad4dd9d451763fb536988402d6e6fe3a378 Reviewed-on: https://review.coreboot.org/c/coreboot/+/36050 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-10-16mb/google/hatch/var/dratini: Add enable pin for elan touchscreenWisley Chen
Add enable pin for elan touchscreen BUG=b:142710871 TEST=touchscreen work Change-Id: I09b6ffb962272bfe46e63b057be885b1bdf13554 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36061 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2019-10-16mb/google/hatch/var/dratini: update goodix power sequenceWisley Chen
Update power sequence to meet spec. BUG=b:142710867 TEST=touchscreen work, and make sure power sequence to meet spec with vendor. Change-Id: I98f8b095374caa8c3540307a51f9d3b69baec905 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36060 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-16mb/google/drallion: Add new SPD file for drallionBora Guvendik
Add the SPD data for MT40A1G16KD-062E:E BUG=b:139397313 TEST=Compile successfully. Change-Id: I3d1ae9269ff3129845a7f53dbacbab6e1b66b6d5 Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35945 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2019-10-16mb/google/octopus: Override VBT selection for BlooguardTony Huang
Disable DRRS on Blooguard SKU - 49, 50, 51, 52 BUG=b:142632381 BRANCH=octopus TEST=emerge-octopus coreboot chromeos-bootimage check i915_drrs_status shows DRRS supported NO when SKU ID is blooguard. Cq-Depend: chrome-internal:1983227 Change-Id: I36a313fd2beacb878da7383f733e206067c1c0fb Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36015 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2019-10-16soc/sifive/fu540: test and fix code of fu540 spiXiang Wang
I tested the SPI through the SD card and fixed sd card communication problem. Added two functions (claim_bus and release_bus). Setting CS signal is invalid by default. Change-Id: I60033a148c21bbd5b4946580f6cab0b439d346c6 Signed-off-by: Xiang Wang <merle@hardenedlinux.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35117 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-10-16mainboard/ocp/monolake: Hide IIO root ports before memory initAndrey Petrov
It turned on some SKUs FSP hangs in Notify stage if IIO root ports are disabled after MemoryInit. To address that hide IIO root ports earlier in romstage. TEST=the patch was ran on affected HW and success was reported Change-Id: I6a2a405f729df14f46bcf34a24e66e8ba9415f9d Signed-off-by: Andrey Petrov <anpetrov@fb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35968 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-10-16mb/facebook/fbg1701: correct clang issuesWim Vervoorn
Corrected clang issues in fbg1701 directory. BUG=N/A TEST=build Change-Id: I968bf8418aa457a7ebd28096bd92a64211bf86dd Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35963 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2019-10-16sb/intel/bd82x6x/lpc: Set up default LPC decode rangesArthur Heymans
This sets up some common default LPC decode ranges in a common place. This may set up more decode ranges than needed but that typically does not hurt. Mainboards needing additional ranges can do so in the mainboard pch_enable_lpc hook. Change-Id: Ifeb5a862e56f415aa847d0118a33a31537ab8037 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33549 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-10-16intel/broadwell: Hook libgfxinit upNico Huber
As VGA_ROM_RUN and libgfxinit are mutually exclusive in Kconfig, we don't have to guard all the VGA BIOS if's and can assume gfx_get_init_done() returns 0 until all the quirks are handled. Then, we can run libgfxinit. Change-Id: Id5d0c2c12b1ff8f95ba4e0223a3e9aff27547acd Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/20100 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-10-16intel/broadwell: Implement proper backlight PWM configNico Huber
Port the backlight-PWM handling from Skylake instead of the previously used Haswell version. We use a 200Hz PWM signal for all boards. Which is higher than the previous devicetree value, 183Hz, but that was over- ridden by the VBIOS anyway. 200Hz is still very low, considering LED backlights, but accurate values are unknown at this time. Lynx Point, the PCH for Haswell and Broadwell, is a transition point for the backlight-PWM config. On platforms with a PCH, we have: o Before Lynx Point: The CPU has no PWM pin and sends the PWM duty-cycle setting to the PCH. The PCH can choose to ignore that and use its own setting (BLM_PCH_OVERRIDE_ENABLE). We use the CPU setting on these platforms. o Lynx Point + Haswell: The CPU has an additional PWM pin but can be set up to send its setting to the PCH as before. The PCH can still choose to ignore that. We use the CPU setting with Haswell. o Lynx Point + Broadwell: The CPU can't send its setting to the PCH anymore. BLM_PCH_ OVERRIDE_ENABLE must always be set(!) if the PCH PWM pin is used (it virtually always is). We have to use the PCH setting in this case. o After Lynx Point: Same as with Broadwell, only BLM_PCH_OVERRIDE_ENABLE is implied and the bit not implemented anymore. Change-Id: I1d61d9b3f1802ebe18799fc4d06f1f1d3b54c924 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35897 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-10-16mb/lenovo/x201: Fix Linux shutting down on s3 resumeArthur Heymans
On some configuration coreboot boots too fast and the EC reports the max temperature, resulting in Linux shutting down immediately. Change-Id: I610c7c9fbf2130566d3c2c758f1796314d3a0973 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36059 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2019-10-16src/superio: Remove unused 'include <console/console.h>'Elyes HAOUAS
Change-Id: Iaeb69c5e7cb3345f4f2ff90eef4f97d72c722ca2 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36048 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-10-16src/mb: Remove unused 'include <arch/io.h>'Elyes HAOUAS
Change-Id: I03461cb9e87b4ddd599e5601637a75b012694e7c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36047 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-10-16src/superio: Remove unused 'include <arch/io.h>'Elyes HAOUAS
Change-Id: Ia08e27da51f1f523232379960dc21c1ba4849932 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36046 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-10-16postcar: Fix linking error with disabled postcar consolePatrick Rudolph
Link files to provide snprintf used by VBOOT code. Change-Id: I040c3952c22893da5aae11b20a618aa4006c6c58 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36053 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-10-16drivers/usb: Enable EHCI debug during verstageArthur Heymans
Change-Id: I14843c1944f2c1e0a26870b576bac549c0cac7f9 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36040 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-10-16vboot: add new vb2ex_abort callbackJoel Kitching
Required for new VB2_ASSERT and VB2_DIE macros in vboot code. (See chromium:972956.) BUG=b:124141368, chromium:1005700 TEST=make clean && make test-abuild BRANCH=none Change-Id: I61a1036ccab80862d6eb12f9f72286f29e8478cf Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36035 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-10-15helios: Add TEMP_SENSOR4 to DPTFPaul Fagerburg
Helios adds TEMP_SENSOR4 to the EC ADC2 pin. Add this to the DPTF. BRANCH=None BUG=b:142266102 TEST=`emerge-hatch coreboot` Verify that Helios builds correctly. Change-Id: I3bc19f9b9bd644e134987749ad9a4d875ad8b40a Signed-off-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35920 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2019-10-15mb/google/hatch: set wifi sar for dragonairWisley Chen
Enable wifi sar feature and set wifi sar name for dragonair sku. BUG=b:142109545 TEST=emerge-hatch coreboot chromeos-bootimage 1. Check wifi_sar-dragonair.hex in /cbfs-rw-raw/dratini 2. Add iwlwifi.debug into kernel params. 3. check SAR value from dmesg only when sku id is 21/22 Change-Id: I0e08610b7c7d2d8da5a749d278bcde26af590e31 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35807 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-10-15mb/google/hatch: Initialize FPMCU_PCH_BOOT1Wisley Chen
FPMCU_PCH_BOOT1 pin is connected to GPP_C12. So, config GPP_C12. BUG=b:142188003 TEST=emerge-hatch coreboot Change-Id: I73a5c3529330ef3e72f4c7d5fcbbd2f6693494d8 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35845 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-15soc/intel/skylake/chip: Unhide P2SB devicePatrick Rudolph
APL unhides the P2SB device in coreboot already. Do the same on SKL/KBL. As the coreboot PCI allocator needs to be able to find the device, unhide it after FSP-S. The device is hidden in the SoC finalize function already and not visible in the OS, as more P2SB device IDs have been added. Other SoCs aren't updated, because they are too broken. Fixes "BUG: XXX requests hidden ...." warnings in coreboot log. Tested on Supermicro X11SSH-TF. Change-Id: I0d14646098c34d3bf5cd49c35dcfcdce2c57431d Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35620 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Michael Niewöhner
2019-10-15soc/intel/common/block/sgx: Fix crash in MP initPatrick Rudolph
On Hyper-Threading enabled platforms the MSR_PRMRR_PHYS_MASK was written when already locked by the sibling thread. In addition it loads microcode updates on all threads. To prevent such race conditions only call the code on one thread, such that the MSRs are only written once per core and the microcode is only loaded once for each core. Also add comments that describe the scope of the MSR that is being written to and mention the Intel documents used for reference. Fixes crash in SGX MP init. Tested on Supermicro X11SSH-TF. Change-Id: I7102da028a449c60ca700b3f9ccda9017aa6d6b5 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35312 Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-15mainboard/lenovo/t410: Add new portNicolas Reinecke
The port is based on the x201 / t410s. 2537-vg5 / i5, no discrete gpu Tested and working: * Native raminit * Native gfxinit * Booting Seabios 1.12.1 * Booting from EHCI * Running GNU/Linux 5.0.0 * No errors in dmesg * EHCI debug on the devices left side, bottom-right * Keyboard * Fn keys (Mute, Volume, Mic) * Touchpad * TPM * Wifi * Sound * USB * Ethernet * S3 resume * VBOOT Testing in progress. Untested: * VGA * Displayport * Docking station Bugs: * AC adapter can't be read from ACPI * TPM not working with VBOOT and C_ENV BB Details for flashing externally: 1. Disconnect all power 2. Connect the external flasher 3. Connect the power cord (This fixes internal power control) 4. Remove the power cord Change-Id: Id9d872e643dd242e925bfb46d18076e6ad100995 Signed-off-by: Nicolas Reinecke <nr@das-labor.org> Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/11791 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-10-14nb/intel/gm45: Don't run graphics init on s3 resumeArthur Heymans
This assumes ACPI aware OS also have a driver for this particular hardware, which is the case for at least Linux. This saves ~60ms on S3 resume. Change-Id: I2dcd399fee8e2d1cd1b70e60e1669a49c7aa8cb4 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35995 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-10-14sb/intel/i82801ix: Add common code to set up LPC IO decode rangesArthur Heymans
This does the following: - Add gen[1-4]_dec options to the devicetree to set up generic LPC decode ranges in the southbridge code. - Move setting up some default decode ranges to a common place. If somehow a board needs to override this behavior it can happen in the mb_setup_superio() hook (that will be renamed when moving to C_ENVIRONMENT_BOOTBLOCK). Change-Id: I3d904b1125bc410c11aa73a89b1969284e88dac1 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35991 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-10-13src/superio: Remove unused superio chipsMartin Roth
These SIOs are not being used or tested by abuild, so remove them from the tree. The only 3 currently unused SIOs that don't get removed here have board ports in review. src/superio/fintek/f71805f src/superio/fintek/f71872 src/superio/intel/i8900 src/superio/ite/it8671f src/superio/ite/it8716f src/superio/nsc/pc87309 src/superio/nsc/pc87360 src/superio/nsc/pc87366 src/superio/nsc/pc97317 src/superio/smsc/dme1737 src/superio/smsc/lpc47b272 src/superio/smsc/lpc47b397 src/superio/smsc/sch4037 src/superio/smsc/sio1036 src/superio/via/vt1211 src/superio/winbond/w83697hf src/superio/winbond/wpcd376i Signed-off-by: Martin Roth <martin@coreboot.org> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I61d486d2c1e2b85eb292eaa78316c36e1735ebf4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35428 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-10-13superio/common: Remove unused include 'pnp_def.h'Elyes HAOUAS
Change-Id: I2d0b3d73d646fc43f2562aa5af2358398eaf28b0 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35987 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-10-13mb/hp/z220_sff_workstation: Remove unused include 'pnp_def.h'Elyes HAOUAS
Change-Id: Id8e25caf2868c37c9d7c7717dd908152dfc583a3 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35986 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-10-13nb/intel/nehalem: Start VBOOT in bootblock with a separate verstageArthur Heymans
Tested on Lenovo Thinkpad X201, selects slot or recovery just fine. Change-Id: Ia2b2f2b95510388599266264eaed0d64ce9b6ec5 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35952 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-10-13nb/intel/nehalem: Move to C_ENVIRONMENT_BOOTBLOCKArthur Heymans
A few notable changes: - Microcode init is done in assembly during the CAR init. - The DCACHE_BSP_STACK_SIZE is set to 0x2000, which is the same size against which the romstage stack guards protected. - The romstage mainboard_lpc_init() hook is removed in favor of the existing bootblock_mainboard_early_init(). Change-Id: Iccd7ceaa35db49e170bfb901bbff1c1a11223c63 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35951 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-10-13sb/intel/ibexpeak: Move some early PCH init after console initArthur Heymans
Some of the initialization isn't necessary before console INIT is done. EHCI debug still works fine on the Lenovo Thinkpad X201. Change-Id: I0c33efd98844f7188e0258cf9f90049d45145e7c Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35949 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-12ec/acpi/ec.c Link EC code in bootblock & verstageArthur Heymans
This allows to read and set bits in the EC ram in the bootblock or verstage. This can be useful if one needs to read a keyboard key as an input for get_recovery_mode_switch in vboot. Change-Id: I20b2264012b2a364a4157d85bfe5a2303cc5e677 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35950 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-10-12mb/biostar/am1ml: Use ite's common functionsElyes HAOUAS
Change-Id: I0b1356420c9ae419b2a0a247b9dc6c8e92b7689a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35966 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-10-12mb/roda/rk886ex: Use pnp_write_config functionElyes HAOUAS
Change-Id: Ic56367d64b9304b36f5ba5a4b7d5237574eb73ae Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35965 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-10-12mb/getac/p470: Use pnp_write_config functionElyes HAOUAS
Change-Id: Iaf9a4608f1b7d25cf5d8dbe2c1489b3d2d00f25a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35964 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-10-11mb/{razer,purism}: Don't select NO_POSTNico Huber
The NO_POST option covers more than classical port 80 output, hence selecting it seems wrong in any case. The default is still rather user patronizing, but let's keep it. As a side effect, this fixes the ability to override the default for NO_POST which Kconfig rejected while these boards selected it. (Seems like a bug in Kconfig, though.) Change-Id: I896b08812b1aa6ce249d7acc8073ebcc0f72eace Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35956 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2019-10-11sb/intel/i82801gx: Move CIR init to a common placeArthur Heymans
Some boards with the G41 chipset lacked programming CIR, so this change add that to those boards too. Change-Id: Ia10c050785170fc743f7aef918f4849dbdd6840e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35795 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-10-11vendorcode/eltan/Kconfig: Hide the Kconfig options when lacking supportArthur Heymans
The vendorcode/eltan mboot and verified boot options only build if a few other Kconfig options are defined. Change-Id: Ie333d2fbf294e23ec01df06ee551e2d09541c744 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35954 Reviewed-by: Wim Vervoorn Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-11vendorcode/siemens: Remove sourcing non existing Kconfig filesArthur Heymans
There is only one subdir in vendorcode/siemens and it does not feature a Kconfig file. Change-Id: I136743344465cea9c769234aa84d9ebe874ef0d2 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35953 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-10-11mb/google/hatch: Add new touchscreen option for KohakuTim Wawrzynczak
The next board rev will have a new option for an Elan touchscreen. Add support for this in the devicetree, as well as use the 'probed' property on both touchscreen options. BUG=b:141957731 BRANCH=none TEST=compiles (next board rev not available yet) Change-Id: I135e693304cbb8dffc0caf4c07846033d6802208 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35944 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Shelley Chen <shchen@google.com>
2019-10-10mb/google/octopus/variants/fleex: Update GPIOs to fix EMRJohn Su
Update GPIO_138 and GPIO_139 setting to fix EMR function. BUG=b:141729962,b:141281846 BRANCH=octopus TEST=verify EMR function in Grob360S. Change-Id: I28cef592374fb4aeee2f3d3010cc0e237d62a2fd Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35881 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-10-10nb/intel/pineview/Kconfig: Remove romcc leftoverArthur Heymans
This is unused since C_ENVIRONMENT_BOOTBLOCK is used. Change-Id: Id5af41e455d211eba89cfeb625f4c728b4145da7 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35948 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-10-10soc/intel: sgx: get rid of UEFI-style usage of global variableMichael Niewöhner
Rework SGX enable status in a clean way without using a global variable. Change-Id: Ida6458eb46708df8fd238122aed41b57ca48c15b Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35882 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-10-10mb/{ibase/mb899,kontron/986lcd-m}: Use pnp_write_hwm5_index functionElyes HAOUAS
Change-Id: If30a17d053da8f0758085fc36469b564d46049cd Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35901 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-10-09soc/qualcomm: Remove default ops to generate bootblock.binArthur Heymans
This is done by default in the main Makefile.inc. TEST: With BUILD_TIMELESS=1 the resulting binary is identical before and after the change. Change-Id: Ie85e023df1f1c2b0f115e4f92719a511f60019c3 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35899 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-10-09soc/mediatek/mt8183: Change argument type of mt_set_emiYu-Ping Wu
Since struct dramc_param has been defined, we can pass the struct directly from mt_mem_init(). BUG=b:139099592 BRANCH=none TEST=emerge-kukui coreboot Change-Id: If7333fb579eff76dd9d1c2bf6fdfe7eccb22050f Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35846 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-09soc/mediatek/mt8183: Run DRAM full calibrationHuayang Duan
Load the calibration params from flash first and check the correctness of the params. If the params have correct format, perform DRAM fast calibration with these params to reduce bootup time. Otherwise, load the DRAM blob and perform DRAM full calibration. Bootup time of DRAM partial calibration: - 1,349,385 usecs with low frequency - 924,698 usecs with middle frequency - 1,270,089 usecs with high frequency 3,544,172 usecs in total. Bootup time of DRAM fast calibration: - 216,663 usecs with low frequency - 328,220 usecs with middle frequency - 322,612 usecs with high frequency 867,495 usecs in total. BUG=b:139099592 BRANCH=none TEST=emerge-kukui coreboot Change-Id: I8de29b14b1fb24b3b4f351c855c5c4d8f350cc34 Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35110 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-10-09soc/mediatek/mt8183: Use cached calibration result for faster bootupHuayang Duan
Load calibration params from flash. If the format of the params is correct, use these calibration params for fast calibration to reduce the bootup time. Bootup time of DRAM partial calibration: - 1,349,385 usecs with low frequency - 924,698 usecs with middle frequency - 1,270,089 usecs with high frequency 3,544,172 usecs in total. Bootup time of DRAM fast calibration: - 216,663 usecs with low frequency - 328,220 usecs with middle frequency - 322,612 usecs with high frequency 867,495 usecs in total. BUG=b:139099592 BRANCH=none TEST=Boots correctly on Kukui Change-Id: I9ef4265dd369a1c276bb02294696556df927e7bc Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35164 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 14:41:26 +0000