| Age | Commit message (Collapse) | Author |
|---|
|
Function gpio_output() is only setting the pin as an output, when in fact
it should also set the state (high/low) of the pin. Fix the procedure to
set the state of the pin.
BUG=b:78328773
TEST=None
Change-Id: I516192a0782a9bbb40124029f264a2711114c800
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/25871
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Currently, google_chromeec_pd_get_amode infinitely loops if a TCPC port
is connected to a device with alternate mode(s) and the call is made
for the mode with the index higher than 0 (e.g. Zinger).
Cros EC manages alternative modes entered in an array (amode[]). The
command is designed to accept a query for an particular index and a
particular SVID.
Zinger has a 'Google' mode. It's stored in amode[0]. When AP queries
first time for DisplayPort with index=0, EC says 'no' as expected.
AP sends the next query with index=1 but EC_CMD_PROTO_VERSION (0x00)
is sent instead because cmd_code is cleared by google_chromeec_command.
res.svid is supposed to be 0 when EC hits the last index + 1 but
res.svid is set to 2 by the EC_CMD_PROTO_VERSION handler because
EC_PROTO_VERSION is currently 2. So, the call succeeds and AP goes to
the next index and this repeats forever.
Any USB-C device with non-DisplayPort alternate mode can cause this
hang unless HDMI port is used.
This patch resets all the fields of chromeec_command in each iteration
in case google_chromeec_command changes them.
BUG=b:78630899
BRANCH=none
TEST=Verify Fizz boots without monitors on Zinger. Verify the svid
enumeration happens as expected.
Change-Id: I388ed4bdfac9176d8e690c429e99674ed267004f
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://review.coreboot.org/25878
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
All ARM architecture boards are supposed to have a TTB region for their
page tables. ARM systems cannot use the data cache without enabling
paging, so it is imperative to do that as soon as possible. They will
also fault on unaligned accesses when not using the cache, which breaks
assumptions in CBFS code.
Unfortunately, we have some old boards in various stages of disrepair in
the tree that don't always follow these sorts of standard conventions.
It's not clear whether they actually boot anymore and if anyone still
has the respective hardware available to maintain them. I cannot really
fix and test them right now, but we should at least create a fake TTB
section for them so that common architecture code may make the correct
assumptions about which regions exist.
Change-Id: I51aa259fbb7a9c0ade72db905b1762c1c721f387
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/25903
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
SoC sdm845 uses ARCH Timer
Change-Id: I45e2d4d2c16a2cded3df20d393d2b8820050ac80
Signed-off-by: T Michael Turney <mturney@codeaurora.org>
Reviewed-on: https://review.coreboot.org/25612
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
New API required by sdm845 DDR init/training protocol
TEST=build & run
Change-Id: I8442442c0588dd6fb5e461b399e48a761f7bbf29
Signed-off-by: T Michael Turney <mturney@codeaurora.org>
Reviewed-on: https://review.coreboot.org/25818
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
This creates a phaser variant for octopus. Nothing is set in the variant
files here; everything is picked up from baseboard.
BUG=b:78572180
TEST=None
Change-Id: Ia03e8af91741f1f7aa3a42ac28688b8b6a708932
Signed-off-by: Justin TerAvest <teravest@chromium.org>
Reviewed-on: https://review.coreboot.org/25877
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Save FSP provided memory HOB info as SMBIOS Table-17 format.
Firmware tools such as mosys, dmidecode uses SMBIOS Table-17 to
report memory metadata.
BUG=b:78651920
TEST=Build for Octopus and check 'dmidecode -t17' and
'mosys memory spd print all' to verify dimm info.
Change-Id: I9b032b766a2927725b2378f7f720644d4459f602
Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com>
Reviewed-on: https://review.coreboot.org/25881
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Linux (4.16) assumes that the PIT interrupt is connected to the pin 0 of the
IOAPIC[0] and panics otherwise.
This might be a Linux bug. The MP Specification 1.4 does seem to mandate
sequential ordering for bus entries, but not for the I/O APICs.
Change-Id: Ibf823eb5b3a29e4590cba915069cdfe5f780edcd
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-on: https://review.coreboot.org/25799
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I6830a65bc9cea2907f4209bb97a53ccebcbf248d
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-on: https://review.coreboot.org/25873
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
With only one entry for Write Protect gpio in the OIPG package, the sysfs
entry /sys/devices/platform/chromeos_acpi/GPIO.x is created as "GPIO"
instead of "GPIO.x". This was causing crossytem to return error for wpsw_cur.
BUG=b:78009842
Change-Id: Ica60f342420d95d09a45580f2f940443c03601de
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/25892
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
scan-build from Clang 4.0.1-3 from Debian Sid/unstable warns about the
issue below.
```
CC ramstage/southbridge/amd/cimx/sb800/lpc.o
src/southbridge/amd/cimx/sb800/lpc.c:102:6: warning: Value stored to 'end' is never read
end = resource_end(res);
^ ~~~~~~~~~~~~~~~~~
1 warning generated.
```
The variable is only used in the commented out print statement. So,
remove the unused variable, and directly use the value directly in the
print statement.
Change-Id: I3f759f6361ffeb07980cb10e17930e11d738a6a7
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://review.coreboot.org/21463
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: I190d41816eef2a5b27a9026ed3d3c822eee8b42b
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://review.coreboot.org/21462
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Use acpigen method to return _STA instead of hardcoding unreadable
bytecode.
Change-Id: I290fb918675857e8ef798e3ab820bcfbdc6f5bdc
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/20982
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
There is no physical LPC connector on apu3 mainboard. This board
contains only LPC debug test points with not all required pins exposed.
Change-Id: I83de16bb651846340788c6fa52c04b8e09e46a99
Signed-off-by: Piotr Król <piotr.krol@3mdeb.com>
Reviewed-on: https://review.coreboot.org/22630
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: I9495b47a85a6fb9d8d06d9a82c0444b794ec4933
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/23481
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: I489780d205e0784914063454c6071b046df6cc30
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/23539
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: I380368873e0508c3a55ac1c4ea0de172e675cf3a
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/23538
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: I8d6f738d358a0a3d4b602a2a607143d98f4710ed
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/23537
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: I6fb31238afff56ff16cf58104f8bed8e9832544c
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/23535
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: Ic1ea93ec54f6ca52e1af8ff09998b8859358b5a0
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/23534
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: I3e3bb9a0e9670fca67016523eac437140ff03188
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/23533
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Fix coding style
Change-Id: Id1c7104eb8520f20c826f5936029739a093d4dba
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/23529
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: Ic8218078f4b1075b41f769e26e34adf9c9b113ac
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/23577
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: I94a87d631c9336b861523592ff217fe823436b36
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/25879
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This variable needs to be in byte so a division by 8 needs to happen.
This problem was introduced by 3cf94032b "nb/x4x/raminit: Rewrite SPD
decode and timing selection", but was probably not encountered because
such dimms are rather uncommon.
Change-Id: I2d57f5e584ac7fa1479791c239432005fe8c178d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/22991
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: If4f3d3ed43fca1bff52ea99cc3eab29beb4e2a08
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/25872
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: I61ff3adb573ffc99f37a1cdcbf5d0d83b2dec0ed
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/25854
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ic81601cef841076a7548ccb3bdf0ed1b5420873e
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/25853
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: I559e71ddc71115167ea4fa380c3c48ac68154f86
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/25855
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Fix regression after commit
0cc2ce4 arch/x86: Clean up CONFIG_SMP and MAX_CPUS test
In case PARALLEL_CPU_INIT=y BSP CPU no longer waited for APs to stop
before proceeding to next bootstates or device initialization.
Change-Id: Ie47e7896ed3d57d98a3ce6766e5c37b6dc22523b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/25874
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Currently, native VGA initialization takes 90 ms during resume. But, it
is not needed. So, skip it to save that time.
Note, it is assumed that ACPI aware operating systems ship the
appropriate drivers to initialize the graphics device. With Linux, if
the module/driver *i915* is not loaded, then the display will stay
black.
TEST=On Lenovo X60t with Debian and Linux 4.15.11-1~bpo9+1, suspend and
resume system and notice display is correctly initialized by the driver
i915 after resume. Notice the messages below.
```
PCI: 00:02.0 init ...
Skipping native VGA initialization when resuming from ACPI S3.
PCI: 00:02.0 init finished in 56 usecs
PCI: 00:02.1 init ...
```
Change-Id: I6cc9dde94c18671d077132daf648e8ba557e7887
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://review.coreboot.org/25676
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This helps with meeting the line length limit.
Also, join some lines with the one above, as the line length is now met.
Change-Id: If457b3b592211aba1a3218501146b17abb5b799f
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/25876
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
This change configures a weak internal pull-up on ESPI_IO1 line for
octopus baseboard and variant bip. ESPI_IO1 is used as ALERT# line and
is expected to be open-drain. However, there is no external pull on
this line and so an internal pull-up is required to ensure proper eSPI
communication.
BUG=b:78497502
TEST=Verified that there is no eSPI communication failure between AP
and EC during boot-up and on suspend/resume.
Change-Id: Ic494aa7397b94bfd233ce10da8287660997b3377
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/25900
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Hannah Williams <hannah.williams@intel.com>
|
|
Add support and enalbe cache-as-ram paging for glk to work around
a cache-as-ram corruption issue. glk executes verstage, romstage,
and FSP-M directly out of cache-as-ram (just like apl). However,
the front end on glk is very agressive about pulling cache lines
into L1I for potential execution. When the snoops hit in the L1D
and the cache lines are dirty the processor writes the line back.
However, there is no backing store for the dirty lines to go. As
such when the line is pulled back in the value is all 0xff's,
corrupting cache-as-ram.
To fix the issue one needs to enable paging with NX (no execute)
permissions which prevents the above actions from happening because
the TLB will indicate that shouldn't be fetched into the instruction
cache since data will be marked no execute.
The generated page tables are added to cbfs and only added to the
COREBOOT cbfs as they are only consumed in the early cache-as-ram
stages.
The page tables generated with:
$ go run util/x86/x86_page_tables.go \
--iomap_file=src/soc/intel/apollolake/glk_page_map.txt \
--metadata_base_address=0xfef00000 \
--pdpt_output_c_file=src/soc/intel/apollolake/pdpt.c \
--pt_output_c_file=src/soc/intel/apollolake/pt.c
Merged address space:
00000000d0000000 -- 00000000fef00000 UC NX : 375 big 256 small
00000000fef00000 -- 00000000fef20000 WB NX : 0 big 32 small
00000000fef20000 -- 00000000fefc0000 WB : 0 big 160 small
00000000fefc0000 -- 00000000ff000000 WB NX : 0 big 64 small
00000000ff000000 -- 0000000100000000 WP : 8 big 0 small
Total Pages of page tables: 5
Pages linked using base address of 0xfef00000.
BUG=b:72728953
Change-Id: Icde9cc0bf5079bb5821f4e59eb61e939c13d7062
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/25719
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Change-Id: If72ce868cdd06183e5055deb94b9d0cf12ed8738
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/25858
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Id13eef7f0fca0b929372490859aa4734ea7a9f23
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/25868
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: Iaed9c0882847511642d8eaab25e10d1ecf24bf90
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/25867
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: I147b3a2c79cd5e6b0e5fa3d23221a6afda8ba8f7
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/25866
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
When smi.h is included to southbridge.h (to use SCI/SMI definitions within
southbridge.h definitions), this causes a collision of the definition of NONE
(ioapic.h also has a NONE definition). As NONE is an enumeration of interrupt
types (SCI/SMI), add INTERRUPT_ at the start of each definition.
This is preparation to have GPIO table/code also declare/program SCI/SMI.
BUG=b:72875858
TEST=Build grunt.
Change-Id: I5c7b798f9f4d7c2a9f9c606c7ebffb7004a37b99
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/25845
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The following things are specific characteristic of mc_apl1 board
variant:
- initialization for the eDP to LVDS converter
- enable decoding address range for COM 3
- legacy IRQ routing for PCI devices
- wait function for old legacy devices
- set coreboot ready LED
Change-Id: I5c853e6caae6cc880ead436f232cabddeee6d09a
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/25822
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
To be selected by mainboard Kconfig if the board hosts an ASMedia chip
that spuriously advertises ASPM features.
Change-Id: I05f9789bc14db56d2ac085f4f14047d80c3aefb5
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/25619
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Remove VBOOT_VBNV_CMOS from the mainboard. It is selected in the
stoneyridge Kconfig.
BUG=b:77347873
TEST=Manually clear CMOS and check coreboot restores VBNV from flash.
Change-Id: I30e517e06ab9d8f7d4a93bf82f12726756c44966
Signed-off-by: Marc Jones <marc.jones@scarletltd.com>
Reviewed-on: https://review.coreboot.org/25844
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add RW_NVRAM area to FMAP for VBOOT_VBNV_CMOS_BACKUP_TO_FLASH support.
BUG=b:77347873
TEST=Manually clear CMOS and check coreboot restores VBNV from flash.
Change-Id: Id8c6f54634b94bf6ae3755a827e80d0862a42dd2
Signed-off-by: Marc Jones <marc.jones@scarletltd.com>
Reviewed-on: https://review.coreboot.org/25843
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Now that we have SPI flash writes working, we can support
VBOOT_VBNV_CMOS_BACKUP_TO_FLASH. This requires the mainboard to reserve
the area in FMAP.
BUG=b:77347873
TEST=Manually clear CMOS and check coreboot restores VBNV from flash.
Change-Id: I488dbfc4c200f5100374d47feb0a0522e6a60e88
Signed-off-by: Marc Jones <marc.jones@scarletltd.com>
Reviewed-on: https://review.coreboot.org/25842
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ic81a172cdeb6c0dca396312393897613c1c51191
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/25841
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Change-Id: I0c59cefa4067d3fc01b8425184e10d3caf1c81ac
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/25839
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
RISC-V doesn't set up page tables anymore, since commit b26759d703
("arch/riscv: Don't set up virtual memory").
Change-Id: Id1e759b63fb0bc88ab256994d3849d16814affa0
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/25701
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
The driver relies on I/O space access functions (inb, etc.), which are
only available on x86.
Rather than explicitly disallowing it on ARM, allow it only on x86.
TEST=Configure for RISC-V, and see that "Serial port on SuperIO" is not
available in the "Generic Drivers" menu anymore.
Change-Id: Ib8e8c402264afeba6dc098683c5464af6edb3ba3
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/25631
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Update FSP header files to match FSP Reference Code Release v2.0.2 for
Gemimilake
CQ-DEPEND=CL:*594651,CL:*598345
Change-Id: I78d064db41a54d97e98d6e44e0832724127e5bfc
Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Reviewed-on: https://review.coreboot.org/25757
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This change enables xDCI controller on poppy, nautilus and soraka.
BUG=b:78577893
BRANCH=poppy
Change-Id: I9b0f81bda889b822479ead4d1acc2b613151a304
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/25849
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change uses the newly added vboot_can_enable_udc to decide if it
is okay to enable xDCI in vboot developer mode.
BUG=b:78577893
BRANCH=poppy
Change-Id: Ia83b91ce17eec782faf5bb318ad8c00c09e2db05
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/25848
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Add a function that will check the various requirements to
enable USB Device Controller (UDC):
- developer mode enabled
- GBB flag set or VBNV flag set
If VBOOT is not enabled, then default is to allow UDC enabling.
BUG=b:78577893
BRANCH=poppy
Change-Id: Id146ac1065f209865372aeb423f66ae734702954
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/25847
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change adds a helper function to read USB Device Controller (UDC)
enable flag from VBNV.
BUG=b:78577893
BRANCH=poppy
Change-Id: Ifd1e9b0781ffee242d695b72287632bc944a50c7
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/25846
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Set the SPI speed for Normal, Fast, AltIO, and TPM in bootblock.
This setup is needed when moving AGESA out of the bootblock. It sets the
SPI bus speed of the TPM access in verstage.
BUG=b:70558952
TEST=Boot with AGESA moved out of the bootblock.
Change-Id: Ida77d78eb1f290e46b57a46298400ed6c8015e2c
Signed-off-by: Marc Jones <marc.jones@scarletltd.com>
Reviewed-on: https://review.coreboot.org/25756
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
It was decided to not add the buffers definitions, so the todo message
is obsolete. Replace it with minimum instructions about when a new buffer
will be needed.
It was also noticed a typo in one command. MBOX_BIOS_CMD_C3_DATA_INFO is
about S3 transition, so it should be called MBOX_BIOS_CMD_S3_DATA_INFO.
BUG=b:77940747
TEST=None.
Change-Id: I6143d7e85476061395962b95ad8864ac32a1d4a3
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/25740
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change "mttrs" to mtrrs.
Change-Id: I4e5930cdcba5e8f5366bb2d4ebbcb659c0c2eb27
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/25823
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
For broken devices that spuriously advertise ASPM, make it possible to
decide ASPM activation in the device driver.
Change-Id: I491aa32a3ec954be87a474478609f0f3971d0fdf
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/25617
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch enables dptf for Octopus by adding dptf.asl in dsdt.asl.
BUG=b:74263914
BRANCH=None
TEST=None
Change-Id: I7194cdd2af88ff062ebcc92cc97b3cdc3d21ecd6
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/25809
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
|
|
The grunt touchpad interrupt can be used as a wake source. For grunt,
the touchpad interrupt uses GPIO5 which corresponds to GEVENT7.
BUG=b:77602771
TEST=In OS: # cat /proc/acpi/wakeup
=> D015 S3 *enabled i2c:i2c-ELAN0000:00
TEST=powerd_dbus_suspend, touching touchpad (> 1 sec) wakes from S3.
Change-Id: I510642108a1257f6601f18c77cf3107573427f39
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Reviewed-on: https://review.coreboot.org/25827
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The grunt EC uses GPIO24 (EC_PCH_WAKE_L) to signal wake-up events to the AP.
On Stoney, GPIO24 maps to GEVENT (GPE) 15.
The kahlee EC uses GPIO2 (EC_PCH_WAKE_L) to signal wake-up events to the AP.
On Stoney, GPIO2 maps to GEVENT (GPE) 8.
BUG=b:78461678
TEST=powerd_dbus_suspend, tap any key on keyboard wakes from S3.
TEST=sign in, EC: lidclose, EC: lidopen => system wakes from S3.
Change-Id: Ib1809740837e686992ff70b81933159a5dff7595
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Reviewed-on: https://review.coreboot.org/25816
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
On the kahlee variant, EC_SMI_ODL is connected to GPIO6, which uses
GEVENT 10 (GPE10). Fix this up, and also clean up the EC_*_GPI
definition format a bit to match the format in the baseboard/gpio.h.
BUG=b:78461678
TEST=build coreboot for kahlee
Change-Id: I9445efbc02559c2a7c90f67bcb0154b04b03a1aa
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Reviewed-on: https://review.coreboot.org/25826
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Apply commit 12d681b2 (intel/i945 gm45: Use acpi_s3_resume_allowed())
also to the Lenovo X200.
Change-Id: I4e1e0ccf2abbe175c0e5ddcbb6ee7bf6afb1ae88
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://review.coreboot.org/25793
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Now that an idt is available in every stage utilize it for exception
processing to help catch and debug issues.
BUG=b:72728953
Change-Id: I69e7f938f36f2e522b787e311fd148bb8fd41247
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/25764
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Now that assembly code isn't processing the idt gates there's
no need to ensure each vector entry is the same amount of code.
BUG=b:72728953
Change-Id: I2b248b26b9df36d6543163762c74622f79278961
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/25765
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Even though most x86 systems don't run with paging on, it's
helpful to always print it out for the ones that do without
making a more complicated handler. New dump will look like
the following:
Unexpected Exception: 6 @ 10:7ab84be2 - Halting
Code: 0 eflags: 00010006 cr2: 00000000
eax: 7abb80ec ebx: deadbeef ecx: 00000000 edx: 00000002
edi: 7abb3000 esi: 00000004 ebp: 7abb2fd8 esp: 7abb2fb0
7ab84ba0: 00 01 00 83 ec 0c 6a 39
7ab84ba8: e8 8a 02 01 00 e8 e1 08
7ab84bb0: 00 00 e8 4e 3d 00 00 59
7ab84bb8: 5b 52 50 e8 f5 3c 00 00
7ab84bc0: c7 04 24 0a 00 00 00 e8
7ab84bc8: 3c 3d 00 00 c7 04 24 80
7ab84bd0: 00 00 00 e8 5f 02 01 00
7ab84bd8: e8 1e 38 01 00 e8 7e 50
7ab84be0: 01 00 0f 0b bb 98 ec ba
7ab84be8: 7a 83 c4 10 8b 03 85 c0
7ab84bf0: 0f 84 be 00 00 00 83 78
7ab84bf8: 04 00 8d 50 08 75 0c 56
7ab84c00: 56 ff 30 52 e8 f8 fe ff
7ab84c08: ff eb 0a 51 51 ff 30 52
7ab84c10: e8 2e ff ff ff 83 c4 10
7ab84c18: 83 c3 04 eb cf 89 d8 e8
BUG=b:72728953
Change-Id: I0e87bbe776f77623ad8297f5d80167998daec6ed
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/25762
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add Kconfig IDT_IN_EVERY_STAGE to optionally specify having
the interrupt handling code available to all stages. In order
to do this the idt setup is moved to a C module. The vecX
entries are made global so that a table of references to all
the interrupt vector entry points can be used to dynamically
initialize the idt. The ramification for ramstage is that
exceptions are initialized later (lib/hardwaremain.c). Not
all stages initialize exceptions when this Kconfig variable
is selected, but bootblock for the C, stages using
assembly_entry.S, and of course ramstage do. Anything left
out just needs a call to exception_init() at the right
location.
BUG=b:72728953
Change-Id: I4146a040e5e43bed7ccc6cb0a7dc2271f1e7b7fa
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/25761
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Change-Id: Ic525c92e73097752a7c690186dc2034785cac678
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/25821
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I52ef2da9148809923c90178a00ba94babba8d2f8
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/25790
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
The FU540 is the first RISC-V SoC with the necessary resources to run
Linux (an external memory interface, MMU, etc).
More information is available on SiFive's website:
https://www.sifive.com/products/hifive-unleashed/
Change-Id: Ic2a3c7b1dfa56b67cc0571969cc9cf67a770ae43
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/25789
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
CSRs are XLEN bits wide (i.e. the same width as general purpose
registers), so size_t seems a little more correct than int.
This change doesn't affect functionality because MSTATUS_MPRV already
fits in 31 bits.
Change-Id: I003c1b88b4493681dc9b6178ac785be330203ef5
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/25625
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
The argument order for smi_write32() is offset, value. Current code had
it backwards.
So, when disable_all_smi_status() was called by sb_slp_typ_handler(),
instead of clearing pending flag SlpTypeEvent65 (0x2) in SMIx88 SmiStatus2
by writing 0x00000002 to 0xfed80288, it would instead write
0x00000088 to 0xfed80202 - clearing the lower 2 bytes of SMIx04
Event_Enable, which disabled the lower 16 GPEs from waking the system from S3.
Thus, the EC events (Keyboard / lid switch) [GPE15] and touchpad [GPE7]
did not work as wake up sources.
BUG=b:78461678
TEST=powerd_dbus_suspend, tapping any key on keyboard wakes from S3.
Change-Id: Ie4fbe6db1bb73f603dcf409117fcce93479a1f46
Fixes:081851a9e4 ("amd/stoneyridge: Add SlpTyp SMI handler")
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Reviewed-on: https://review.coreboot.org/25815
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
smi_sources is a file local array of constants.
Change-Id: I431f181449a591ccaf8395f01a84c8e006a29b52
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Reviewed-on: https://review.coreboot.org/25814
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
CR 24h Bit 0 is PNPCVS.
Change-Id: Ia79a42ed60e82a84b60f254a0895ec52c1fcda0b
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/23790
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When employing PAGING_IN_CACHE_AS_RAM more areas need to be
mapped in at runtime. Therefore, paging_identity_map_addr() is
added to support adding identity mappings. Because there are a
fixed amount of pages in cache-as-ram paging only the existing
paging structures can be used. As such that's a limitation on
what regions and length one can map. Using util/x86/x86_page_tables.go
to generate page tables will always populate all the page directory
pages. Therefore, 2MiB mappings are easy to map in.
BUG=b:72728953
Change-Id: Ibe33aa12972ff678d2e9b80874529380b4ce9fd7
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/25718
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Siemens will provide further boards based on Apollo Lake. These differ
only slightly. To avoid copying the complete directory of the reference
board we simply create variants that only contain the differences, like
google/reef does.
To further the ability of multiple variant boards to share code provide
a place to land the split-up changes. This patch provides the tooling
by using a new Kconfig value, VARIANT_DIR, as well as the Make plumbing.
The directory layout with a single variant mc_apl1 (which is also the
baseboard) looks like this:
variants/baseboard - code
variants/baseboard/include/baseboard - headers
variants/mc_apl1 - code
variants/mc_apl1/include/variant - headers
New boards would then be added under their board name within the
'variants' directory.
No split has been done with providing different logic yet. This is
purely an organizational change.
Change-Id: Ia3c1f45daee3b9690a448b82edbeec552ee05973
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/25785
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
In some cases it may be useful to be able to bitbang a UART, such as
during early bring-up when a driver for the actual controller isn't
available yet. On some platforms we may even want to use this
permanently, such as on the SDM845 where the hardware UART controller
needs to have firmware loaded and is thus unavailable for most of the
bootblock.
This patch adds some helper code that makes it easy to implement this on
a platform, you just have to pass it a function to control the Tx pin
state and it will do the rest. It relies on the mono_time API and is
thus bound to microsecond timing granularity, but that seems to be
barely good enough for 115200 baud if the bit times are calculated
carefully.
Change-Id: If7dcecc7b8a95ec15f456efd2ec1f1e0dde239b4
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/25812
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
It's going to be necessary to know the i/o hole size as well
the amount of memory configured in the sytsem. Therefore, add
two helper functions:
memory_in_system_in_mib()
iohole_in_mib()
Both return values in units of MiB.
BUG=b:72728953
Change-Id: I481ba517c37f769e76d9e12b3631f5f99b5427a9
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/25738
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When tearing down cache-as-ram disable paging if PAGING_IN_CACHE_AS_RAM
is enabled.
BUG=b:72728953
Change-Id: I86e8a57a1187876dcbedce9f4f6b05be30aea7c6
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com>
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/25732
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Processors, such as glk, need to have paging enabled while
in cache-as-ram mode because the front end is agressive about
fetching lines into the L1I cache. If the line is dirty and in
the L1D then it writes it back to "memory". However, in this case
there is no backing store so the cache-as-ram data that was written
back transforms to all 0xff's when read back in causing corruption.
In order to mitigate the failure add x86 architecture support for
enabling paging while in cache-as-ram mode. A Kconfig variable,
NUM_CAR_PAGE_TABLE_PAGES, determines the number of pages to carve
out for page tables within the cache-as-ram region. Additionally,
the page directory pointer table is also carved out of cache-as-ram.
Both areas are allocated from the persist-across-stages region
of cache-as-ram so all stages utilizing cache-as-ram don't corrupt
the page tables.
The two paging-related areas are loaded by calling
paging_enable_for_car() with the names of cbfs files to load the
initial paging structures from.
BUG=b:72728953
Change-Id: I7ea6e3e7be94a0ef9fd3205ce848e539bfbdcb6e
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/25717
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
|
|
Additional LPC and SPI setup needed to move AGESA out of the bootblock.
Setup the prefetch, sio decode, and a bugfix for SPI.
BUG=b:70558952
TEST=Boots with AGESA moved out of bootblock.
Change-Id: I2c0d8632b25c036ff977c21477feb4778575189c
Signed-off-by: Marc Jones <marc.jones@scarletltd.com>
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/25755
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Remove Fch.h from being included in
src/vendorcode/amd/pi/00670F00/agesa_headers.h. It is not needed.
BUG=b:69220826
BRANCH=master
TEST=build Gardenia and Grunt systems.
Change-Id: Ifde58421d20c813ae5708b1d9c6ec76433051d33
Signed-off-by: Garrett Kirkendall <garrett.kirkendall@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/25808
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
It's broken for years and nobody noticed (%ei for %esi and stackerr for
.Lhlt). It would also leave CAR not zeroed out.
Change-Id: Ib1ca8e8e71ea8d1bf834c349fd6e2ca81538b6eb
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-on: https://review.coreboot.org/25797
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
We need to ensure the cache as ram area is set to all zeroes so that
car_migrated works.
Despite a comment claims the previous value is a test pattern it's
actually not used for any testing. Drop the comment too.
Change-Id: I1c91acbca8a860c2ed9c691d08d18718604682d8
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-on: https://review.coreboot.org/25796
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This patch sets the NPK device off for octopus.
BUG=b:76115112
TEST=Build for Octopus and check that the logs do not
report "PCI: 00:00.2 not found, disabling it".
Change-Id: I3ac01f90cf946b019a6604a38dd1d6782f8d5759
Signed-off-by: Shaunak Saha <shaunak.saha@intel.com>
Reviewed-on: https://review.coreboot.org/25801
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch makes our devicetree in sync with the FSP configuration.
Without this we see in boot logs "PCI: 00:00.2 not found,
disabling it". The reason being in FSP NPK device is disabled by
default. We can enable it by enabling the UPD parameter TraceHubEn.
If we enable it in FSP then the logs complain the NPK pcie device
is not seen.
BUG=b:76115112
TEST=Build for Octopus and check that the logs do not report
"PCI: 00:00.2 not found, disabling it".
Change-Id: I8fe3a36dac2eff2225dacb0e6e16500a5750261e
Signed-off-by: Shaunak Saha <shaunak.saha@intel.com>
Reviewed-on: https://review.coreboot.org/25333
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
There's no good reason to use the more complicated name.
Change-Id: I515e2df3b87580ddd31d18fe63451a98e92ead61
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/25700
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
These are redundant -- the actual APIC Ids and addresses are in the
devicetree.
Change-Id: I895563dd574a8f4631866ceec91a20cbc3b158e4
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-on: https://review.coreboot.org/25800
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This UART is used in the SiFive FU540 SoC, and will probably be used in
other SoCs in the future.
Change-Id: I915edf39666b7a5f9550e3b7e743e97fe3cacfd3
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/25768
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Found-by: Coverity (CID 1387031: Memory - illegal accesses
(BUFFER_SIZE_WARNING)). Calling strncpy with a maximum size argument of
19 bytes on destination array "dimm->module_part_number" of size 19 bytes
might leave the destination string unterminated. Fix the size parameter.
BUG=b:76202696
TEST=Build and boot kahlee, using special debug code to see the output
strings, which was later removed.
Change-Id: I18fa5e9c73401575441b6810f1db80d11666368c
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/25419
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
When GPIO tables were created, there was no study on which pins had to be
programmed ASAP and which could be programmed later. Execute such study and
move all non-critical gpios from reset to late.
BUG=b:76097508
TEST=Build and boot grunt to OS, test OS for lost functionality (WIFI, video
playback, track pad, keyboard).
Change-Id: Icbc9370050d619800026035caaac3e89536a460a
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/25395
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
With the increase of dimm->module_part_number size from 19 to 21 (commit
35b273eea3) "include/memory_info.h: Change part number field from 19 bytes
to 21", this code is now advancing outside DDR3 SPD designated space. The
correct size is already defined as LPDDR3_SPD_PART_LEN, use it. Also make
sure to 0 terminate the string.
BUG=b:77943312
TEST=Build cyan.
Change-Id: Iba0ef4149acfc09b7672fce079df06bf1a01dff6
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/25702
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
DDR4 reserves 20 bytes for part number without termination. Therefor
coreboot buffer for part number has to be increased to 21 bytes, to
account termination.
BUG=b:77943312
TEST=Build kahlee.
Change-Id: I57aa8e06d907a1e6b11ce88f612a0d6c14b7c65b
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/25650
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add ENV_CACHE_AS_RAM to indicate to compilation units if cache-as-ram
is employed for that particular stage.
BUG=b:72728953
Change-Id: I06dfa7afe2d967229549090d5aa95455687b0bb9
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/25716
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
|
|
In commit d87e4b34 (stage_cache: Add rmodule params in metadata)
the cbmem stage cache was updatd to keep track of the arg from
struct prog in the metadata. However, external stage cache did
not get the same change. Fix that.
BUG=b:72728953
Change-Id: Ifdaaa255cac0f413856410ff61bfb411a9554a31
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/25794
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Certain platforms need to pass different stack pointer values to
postcar depending on S3 resume or not. Add comments to ease the
reader in understanding the point. If different stack values weren't
needed the program was already cached in stage cache with the correct
value.
Change-Id: I7202c62e6202a14416cb49ad5348740174747c7d
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/25795
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Instead of writing out '__attribute__((weak))' use a shorter form.
Change-Id: If418a1d55052780077febd2d8f2089021f414b91
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/25767
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
|
|
Entry points from assembly to C need to have the stacks aligned
to 16 bytes with the newer compilers. This entry point was
missed. Correct it.
BUG=b:72728953
Change-Id: Idb29daf830c05fd5543c2194690364ce31b6a22c
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/25763
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Currently the idt setup and handling is only in ramstage. In
order to prepare having an exception handler in other stages
move the interrupt vector entry code to its own compilation
unit. vec0 and int_hand need to be global so c_start.S
references will resolve at link time.
BUG=b:72728953
Change-Id: I435b96d987d69fb41ea27a73e2dd634b5d6ee3d9
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/25760
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Current patch fixes problem with validation of ACPI in Linux kernel:
ACPI BIOS Error (bug): A valid RSDP was not found (20180313/tbxfroot-210)
1. function acpi_checksum() returns u8, so seems that is not good idea to
use write_le32().
2. at least RSDP (https://wiki.osdev.org/RSDP#Validating_the_RSDP) has
u8 checksum.
Change-Id: I1fb29ef4e58982aab0c54b1f715c5658d2a663d8
Signed-off-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Reviewed-on: https://review.coreboot.org/25753
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This change adds keyboard backlight feature for Nami platform
BUG=b:78360907
BRANCH=none
TEST=keyboard backlight works when EC reports correct info.
Change-Id: I3fceb83e155032b6e9f1763c4e2a29e7521269d2
Signed-off-by: Zhuohao Lee <zhuohao@chromium.org>
Reviewed-on: https://review.coreboot.org/25782
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
