summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2020-03-17sb/lynxpoint/gpio: fix interrupt stormMatt DeVillier
On newer kernels (> 4.9 LTS), the GPIO ACPI device's interrupt resource causes an interrupt storm which prevents the CPU from properly idling, significantly increasing power consumption. This was fixed for soc/broadwell (which also supports lynxpoint-lp) by removing the interrupt resource, so apply the same fix here. Original fix: https://chromium-review.googlesource.com/203645 Test: build/boot google/wolf, verify CPU0 idles correctly and power consumption drop via powertop in kernels 4.16.18 and 5.x. Change-Id: Ic4963f2f0225b5f44a7604b0107911640345c855 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39578 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-17src/mb/intel/tglrvp: Update camera ACPI configurationDaniel Kang
* Change power sequence to make it closer to ov8856 sensor data sheet version 2 * Handle different PWREN GPIO pins for up3 and up4 * Add link frequencies definitions to sensor side * Clean up format BUG=None BRANCH=None TEST=Build and boot TGLRVP U or Y. Start camera app and able to capture images. Signed-off-by: Daniel Kang <daniel.h.kang@intel.com> Change-Id: Ic11a36f1f82fe425c1a5796847ce020007064403 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39529 Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-17src/soc/intel/tigerlake: Fix incorrect use of Field objects in ASLRizwan Qureshi
Method RAOW is assuming that the first argument is a Field object and writing to it expecting the register to get updated. However, the callers are passing in the value of the Field object instead. This eventually is resulting the IMGCLK not getting enable/disabled on the platform. Fix this by sending the exact address of the register to be updated. Also MCCT was setting the clock frequency in both case i.e, Clock Enable and Disable. Split the MCCT method in two, MCON and MCOF to fix the sequencing like below MCON: Set frequency Enable clock MCOF: Disable clock Also, make use of MCON and MCOF methods for camera clock control in tglrvp. This is to avoid the buildbot marking the patch unstable. BUG=None BRANCH=None TEST=Build and Boot waddledoo board and verified that IMGCLKOUT for world facing camera is enabled/disabled and able to capture images. Build and Boot Tiger Lake RVP board and verified that IMGCLKOUT for world facing camera is enabled/disabled and able to capture images. Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Change-Id: I8b886255d5f38819502ae1f4af0851b5a0922b22 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39498 Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-17src/include/device: Add Intel Tiger Lake Thunderbolt device IdJohn Zhao
Tiger Lake Thunderbolt(TBT) has 4 PCIe root ports. Add those TBT root port devices Id from EDS #575683. BUG=None TEST=built image and booted to kernel successfully. Change-Id: Ia117d63daa15dfb21db28fd76723e97ab030da92 Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39526 Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Reviewed-by: Divya S Sasidharan <divya.s.sasidharan@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-17soc/intel/cannonlake: Set correct serirq modeJeremy Soller
Set FSP params PchSirqEnable/PchSirqMode based on board setting of serirq_mode. Matches implementation on Skylake. This is a no-change for existing boards since the default remains SERIRQ_QUIET mode. Tested on system76 galp3-c, out-of-tree WHL-U board Change-Id: I9ad4f5a6c7391fc6e813ec1306c708f449a69f59 Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31536 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Nathaniel L Desimone <nathaniel.l.desimone@intel.com>
2020-03-17src/device/pci_rom.c: Show device IDs on oprom failureMartin Roth
On a device/option-rom ID mismatch, the option rom's IDs would get shown twice instead of showing the actual device's IDs. This was very confusing because the error showed matching IDs. BUG=None TEST=Shows mismatched IDs when option rom doesn't match the hardware Change-Id: I5a06d6a7319aa653c8a5e32ec3c5afb651d83140 Signed-off-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2013180 Reviewed-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39586 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-17mb/google/octopus: Add custom SAR values for Foob360Peichao Wang
Foob360 would prefer to use different SAR values. Since Foob360 sku id is 9. BUG=b:149362272 BRANCH=octopus TEST=build Signed-off-by: peichao.wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: I8cc5d73629990f19d2c1044debdba4990c54d07e Reviewed-on: https://review.coreboot.org/c/coreboot/+/39424 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com>
2020-03-17soc/broadwell: remove unused function init_one_gpio()Matt DeVillier
Function was copied as part of upstreaming from Chromium tree, but isn't used and has never been used best I can tell. Change-Id: I53b8702c97d7a694450aa05ba49da6c26c30f725 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39576 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-17mb/purism: remove duplicate ACPI power buttonMatt DeVillier
These platforms use the standard fixed function power button and do not need a second power button device declared or the kernel will end up with two devices reporting the same event. Same change was applied to all google mainboards in CB:27272 which contains more detail. Change-Id: I17c85e43493530d04f4fa13f33bec6d027cb3147 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39577 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-17memrange: Add a helper function to determine if memranges is emptyFurquan Shaikh
This change adds a helper function memranges_is_empty() which returns true if there are no entries in memranges. BUG=b:149186922 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: If841c42a9722cbc73ef321568928bc175bf88fd5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39485 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-03-17memrange: Add support for stealing required memory from given rangesFurquan Shaikh
This change adds memranges_steal() which allows the user to steal memory from the list of available ranges by providing a set of constraints (limit, size, alignment, tag). It tries to find the first big enough range that can satisfy the constraints, creates a hole as per the request and returns base of the stolen memory. BUG=b:149186922 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: Ibe9cfae18fc6101ab2e7e27233e45324c8117708 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39484 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-03-17memrange: Enable memranges to support different alignmentsFurquan Shaikh
This change enables memranges library to support addresses with different alignments. Before this change, memranges library supported aligning addresses to 4KiB only. Though this works for most cases, it might not be the right alignment for every use case. Example: There are some resource allocator changes coming up that require a different alignment when handling the range list. This change adds a align parameter to struct memranges that determines the alignment of all range lists in that memrange. In order to continue supporting current users of memranges, default alignment is maintained as 4KiB. BUG=b:149186922 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I1da0743ff89da734c9a0972e3c56d9f512b3d1e8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39483 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-03-17mb/google/dedede: Add waddledee variantKarthikeyan Ramasubramanian
Add initial support for waddledee variant board. BUG=b:151576904 TEST=Build the mainboard and variant board. Change-Id: I20d41fbbb78c7fd2f964a97ffebbc9c3bbfb1c5c Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39580 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-03-16mb/intel/tglrvp: Enable ISH driver and register firmware nameli feng
BRANCH=none BUG=b:145946347 TEST=boot to OS with TGL RVP UP3, then copied ISH firmware to host file system /lib/firmware/intel/tglrvp_ish.bin check "dmesg |grep ish", it shows: ish-loader: ISH firmware intel/tglrvp_ish.bin loaded cros_ec_ishtp: Chrome EC device registered Those means shim loader in coreboot has loaded ISH firmware, and firmware is running successfully. Signed-off-by: Hu, Hebo <hebo.hu@intel.com> Signed-off-by: li feng <li1.feng@intel.com> Change-Id: I1ee8050aef6ec0828f16ef2695b5347278caa820 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39481 Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-16drivers/intel/ish: Add TGL ISH PCI idli feng
BRANCH=none BUG=b:145946347 TEST==boot to OS with TGL RVP UP3 Signed-off-by: Hu, Hebo <hebo.hu@intel.com> Signed-off-by: li feng <li1.feng@intel.com> Change-Id: I3a4f73e82f62def3adb2cb1332a315366078c918 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39478 Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-16soc/intel/tigerlake: Support ISHli feng
Add ACPI Object for ISH SSDT Enable/disable ISH based on devicetree BRANCH=none BUG=b:145946347 TEST=boot to OS with TGL RVP UP3 Signed-off-by: Hu, Hebo <hebo.hu@intel.com> Signed-off-by: li feng <li1.feng@intel.com> Change-Id: I30f4d936ece139cf67640e6df6a9f47579f87bca Reviewed-on: https://review.coreboot.org/c/coreboot/+/39480 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2020-03-16src/soc/tigerlake_dev: Update PMC IPC Hardware IDJohn Zhao
Change PMC IPC HID from INT34D2 to INTC1026 along with new kernel pmc ipc driver. BUG=b:148949891 BRANCH=none TEST=Boot on Volteer and validate DP tunneling. Change-Id: I987e7bf76ad1f8ff534101c80661f7c027a60b51 Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39479 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Divya S Sasidharan <divya.s.sasidharan@intel.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2020-03-16nb/intel/i945/raminit: Simplify if conditionPaul Menzel
Use De Morgan’s law to simplify the condition by getting rid of the negations. TEST=With `make BUILD_TIMELESS=1` getac/p470 remains unchanged. Change-Id: I041f2740d6991f9b4e6b8f77988b970c028ca512 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39534 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-16mb/51nb/x210: correct battery ACPIMatt DeVillier
The X210 EC reports battery values in broken mAh. These have to be adjusted by 10000 * DGVO, as documented in https://github.com/torvalds/linux/blob/master/drivers/acpi/battery.c. Taken from https://github.com/harrykipper/coreboot, commits 2f68f138adb25605e5715896636cf33f6de5bd95 c1c72cc43708a6647f263a767c39cf3072908e20 Change-Id: Ie097272443b18b16c3937034f874d3b5a6bdd62a Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39142 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-16mb/51nb/x210: update devicetreeMatt DeVillier
- Add USB ports for SD card reader, fingerprint reader, and internal port. - Enable PcieRpClkReqSupport on NVMe root port, correct values for ClkReq/ClkSrc. - Improve comment for M.2-2230 USB port (BT) Parts derived from x210_test branch of HarryKipper's repo: https://github.com/harrykipper/coreboot Change-Id: Ib64629ada4726e5edc080608f71a51f56a9b747c Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39143 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-03-16mb/51nb/x210: add libgfxinit supportMatt DeVillier
Derived from x210_test branch of HarryKipper's repo: https://github.com/harrykipper/coreboot Test: build/boot x210, test eDP, MiniDP, VGA outputs Change-Id: Ie2b79b236a458ebd243c992d6e615e41930eeb50 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39106 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-03-16mb/51nb: Add support for the 51nb X210Matthew Garrett
The 51nb X210 is a replacement motherboard for Thinkpad X200/X201 systems, based on a modern Kabylake CPU. It also ships with no firmware protection, (IFD is fully unlocked, no protected regions are set, no Bootguard), making it an ideal coreboot target. This port is based on the support for the Skylake-based Purism Librem 13v3, with the following significant changes: * EC firmware is contained within the system SPI flash, and so a blob of EC firmware must be injected to a defined location during image build. * GPIO layout is different - this is currently just a raw import of the GPIO configuration from the vendor firmware * The system has two DIMMs, so an additional SPD address has been added * The USB port layout is different * The EC must be enabled at boot time through SuperIO-style logical device configuration * EC register layout is different, necessitating changes in the ACPI tables * The HDA pins are different * The genx_dec config is different All hardware appears to work as expected, although the SD reader is untested. Signed-off-by: Matthew Garrett <mjg59@google.com> Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Change-Id: If74621e76d703f629b54f1feb1acfc95cc72d183 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32531 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-03-16ec/51nb: add support for NPCE985LA0DX ECMatt DeVillier
Add support for the NPCE985LA0DX, as used on the 51NB X210 (to be added in a follow-on commit, and from which this was extracted). Original source: https://review.coreboot.org/c/coreboot/+/32531/37 Change-Id: I5798fad7fd18083cde1aa647fd91ca9c5ce963b7 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Signed-off-by: Matthew Garrett <mjg59@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39567 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-03-15mb/google/kahlee/nuwani: support new Elan touch panel for NuwaniTommie
This is new Elan touch screen IC, which includes touch panel and USI pen. BUG=b:151514167 TEST=build bios and verify touch screen works fine Signed-off-by: Tommie Lin <tong.lin@bitland.corp-partner.google.com> Change-Id: I98801b8c31812637f71d7eaaa0f12b47901dc47a Reviewed-on: https://review.coreboot.org/c/coreboot/+/39494 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2020-03-15soc/intel/Kconfig: Avoid specifying dedicated chipset nameSubrata Banik
This patch ensures all IA chipsets and common Kconfig files are getting included without specifying dedicated chipset names. TEST=Able to compile CML and TGL RVP. Change-Id: Ic2d8a8ac1c4acfabd4ded1bfd4ff359e820e174b Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39530 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-15drivers/smmstore: default to selected for Tianocore payloadMatt DeVillier
Now that SMMSTORE is implemented across all platforms that Tianocore supports, default to selected so that NVRAM functions and Tianocore setting saved as users expect. Change-Id: I067e5faee73cba585a1123215ed2d80e3eaa7877 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39570 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Benjamin Doron <benjamin.doron00@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-15soc/intel/common: Check prerequisites for GLOBAL_RESET commandSridhar Siricilla
Check prerequisites before sending GLOBAL RESET command to CSE. TEST=Verified on hatch. Change-Id: Ia583e4033f15ec20e942202fa78e7884cf370ce4 Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38800 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-15soc/intel/common/block/cse: Modify handling of HMRFPO_ENABLE commandSridhar Siricilla
Below changes are done: 1. Allow execution of HMRFPO_ENABLE command if CSE meets below prerequisites: - Current operation mode(COM) is Normal and Curret working state(CWS) is Normal. -(or) COM is Soft Temp Disable and CWS is Normal if ME's Firmware SKU is Custom. 2. Check response status. 3. Add documentation for send_hmrfpo_enable_msg(). 4. Rename padding field of hmrfpo_enable_resp to reserved. The HMRFPO (Host ME Region Flash Protection Override) mode prevents CSE to execute SPI I/O cycles to CSE region, and unlocks the CSE region to perform updates to it. This command is only valid before EOP(End of Post). For Custom SKU, follow below procedure to place CSE in HMRFPO mode: 1. Ensure CSE boots from BP1. When CSE boots from BP1, it will have opmode Temp Disable Mode. 2. Send HMRFPO_ENABLE command to CSE. Then, CSE enters HMRFPO mode. CSE Firmware Custom SKU Image Layout: = [RO] + [RW + DATA PART] = [BP1] + [BP2 + DATA PART] Here, BP1 will have reduced functionality of BP2, and the BP1 will be CSE's RO partition and [BP2 + DATA PART] together will represent CSE's RW partition. CSE can boot from either BP1(RO) or BP2(RW). CSE Image Layout in Consumer SKU: BP2 + BP3 + DATA PART TEST=Verfied on hatch board. Change-Id: I7c87998fa105947e5ba4638a8e68625e46703448 Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37283 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-15nb/intel/pineview: Clean up code and commentsAngel Pons
- Reformat some lines of code - Put names to all MCHBAR registers in a separate file - Rewrite several comments - Use C-style comments for consistency - Rewrite some hex constants - Use HOST_BRIDGE instead of PCI_DEV(0, 0, 0) - Align a bunch of things Tested with BUILD_TIMELESS=1, foxconn/d41s remains unaffected. Change-Id: I29104b0c24d66c6f49844f99d62ec433bb31bdaf Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39414 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-03-15cpu/intel/model_2065x: Add missing CPU IDsAngel Pons
The missing CPU IDs were found on CPU-World's database: - 0x20650: http://www.cpu-world.com/cgi-bin/CPUID.pl?SIGNATURE=132688 - 0x20651: http://www.cpu-world.com/cgi-bin/CPUID.pl?SIGNATURE=132689 - 0x20652: http://www.cpu-world.com/cgi-bin/CPUID.pl?SIGNATURE=132690 - 0x20654: http://www.cpu-world.com/cgi-bin/CPUID.pl?SIGNATURE=132692 - 0x20655: http://www.cpu-world.com/cgi-bin/CPUID.pl?SIGNATURE=132693 Note that these CPUs are not Nehalem, but rather Arrandale on laptops and Clarkdale on desktops, so also update the comments accordingly. Change-Id: I285961b62b9a8ada5a1659cd9ad75f7075259664 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38943 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-15treewide: Replace uses of "Nehalem"Angel Pons
The code in coreboot is actually for the Arrandale processors, which are a MCM (Multi-Chip Module) with two different dies: - Hillel: 32nm Westmere dual-core CPU - Ironlake: 45nm northbridge with integrated graphics This has nothing to do with the older, single-die Nehalem processors. Therefore, replace the references to Nehalem with the correct names. Change-Id: I8c10a2618c519d2411211b9b8f66d24f0018f908 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38942 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-15nb/intel/nehalem: Rename to ironlakeAngel Pons
The code is for Arrandale CPUs, whose System Agent is Ironlake. This change simply replaces `nehalem` with `ironlake` and `NEHALEM` with `IRONLAKE`. The remaining `Nehalem` cases are handled later, as changing some of them would impact the resulting binary. Tested with BUILD_TIMELESS=1 without adding the configuration options into the binary, and packardbell/ms2290 does not change. Change-Id: I8eb96eeb5e69f49150d47793b33e87b650c64acc Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38941 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-15ec/google/wilco: Store LID status into LIDS and change device nameEric Lai
Store LID status into LIDS and change device name to LID0. Then Intel driver can reference it. BUG=b:151134069 TEST=check LID status by evtest Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Ifdac938730eac034b626aa8ad9d52462f65137ba Reviewed-on: https://review.coreboot.org/c/coreboot/+/39497 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-03-15nb/intel/i945/raminit: Use boolean type for helper variablesPaul Menzel
Change-Id: I465a68f281534cd9fc5a7bde02c32d1353cfdaed Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39536 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-15nb/intel/i945/raminit: Remove space for correct alignmentPaul Menzel
Change-Id: I35d14541e0eab4474b03a9d2f114c7aa3e92918c Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39535 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-03-15mb/asus/p8z77-m_pro: Use uppercase for *PRO*Paul Menzel
Consistently use the official uppercase spelling. Change-Id: I2e2d62389d1b965f4a391080a10e7f97fa787d14 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39350 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-15lib/spd_bin: Add spaces around operatorPaul Menzel
Change-Id: Ic0571d06e94708dd5e151621ab7790f3c9f775c2 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39528 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-15soc/intel/icelake: Re-flow comment for 96 charactersPaul Menzel
Change-Id: I7a5d7bb476c33ab995136eb47ef0258b483a42ef Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39457 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-15soc/intel/icelake: Correct past participle in commentPaul Menzel
Change-Id: I117c8d2f71824292c4ca87b6f9434d2106bb512d Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39456 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-15soc/intel/tigerlake: Match RP number with TGL EDSWonkyu Kim
Update RP number to 12 according to PCH EDS#576591 vol1 rev1.2. BUG=b:151208838 TEST=build RVP successfully Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: Iabdbfd99f7154741c16da53bcd9d1c7ca4f81129 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39490 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
2020-03-15lib/spd_bin: Cleanup spd_get_banksEric Lai
Remove the switch case in spd_get_banks. The LPDDR4X adapt DDR4 attributes. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Icfaefd1856d2350c6e5a91d233ccdb10d5259391 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39496 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-03-15lib/spd_bin: Add LPDDR4X SPD information and DDR5, LPDDR5 IDsEric Lai
Follow JESD 21-C: DDR4 SPD Document Release 4 to add new DDR type. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I455c9e4c884ae74c72572be6dc2bd281a660e517 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39495 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-03-15soc/intel/tigerlake: Enable CNVi through dev_enabledSrinidhi N Kaushik
Check for dev enabled status for CNVi and update the UPD accordingly. BUG=none BRANCH=none TEST=Build and boot tglrvp Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: I15a03cc70f12e094badf942dd81f22bd09531051 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39465 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2020-03-15soc/intel/tigerlake: Update Cpu Ratio settingsSrinidhi N Kaushik
Add config to override CpuRatio or setting CpuRatio to allowed maximum processor non-turbo ratio. BUG=151175469 BRANCH=none TEST=Build and boot tglrvp and observe there is no extra reset in meminit. Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: I2fa883b443d0a4c77d62275faeacd1ed2c67a97c Reviewed-on: https://review.coreboot.org/c/coreboot/+/39493 Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Caveh Jalali <caveh@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-15nb/intel/haswell: Tidy up code and commentsAngel Pons
- Reformat some lines of code - Put names to all used MCHBAR registers - Move MCHBAR registers into a separate file, for future expansion - Rewrite several comments - Use C-style comments for consistency - Rewrite some hex constants - Use HOST_BRIDGE instead of PCI_DEV(0, 0, 0) Tested, it does not change the binary of Asrock B85M Pro4. Change-Id: I926289304acb834f9b13cd7902801798f8ee478a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38434 Reviewed-by: David Hendricks <david.hendricks@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-15mb/intel/tglrvp: Enable CNVi in devicetree for Tiger Lake UP3Srinidhi N Kaushik
Enable CNVi in devicetree and add gpio pad configs for CNVi BUG=none BRANCH=none TEST=Build and boot tglrvp Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: I71146960e0d53dae87946a0365dac6f224a72391 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39464 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Caveh Jalali <caveh@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-15mb/google/hatch: Create palkia variantKane Chen
Add Palkia as a variant of Hatch. BUG=b:150254194 BRANCH=none TEST=none Signed-off-by: Kane Chen <kane_chen@pegatron.corp-partner.google.com> Change-Id: I6a303d9fc2be9ea358ad66cd648738187c974193 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38860 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-15mb/google/volteer: Use generic SPD filesNick Vaccaro
Volteer uses 4 bits (hardware straps) to indicate what memory configuration the board is populated with (i.e. which SPD file to use for the populated memory). This allows for only 16 different SPDs for supporting Volteer and all future variants of Volteer. Currently, each memory chip needs its own SPD file, so we can only support 16 different memory chip options for Volteer and all of its variants. Generic SPD files are just SPD files that have been stripped down to contain only fields that are important for the memory controller (strips out items like vendor info, for example). Using generic SPD files allows for more than 16 different memory options given it's no longer a 1-to-1 mapping as similar memory modules from different vendors can share the same generic SPD file. BUG=b:147857288 TEST="emerge-volteer coreboot chromeos-bootimage", flash ripto and verify ripto boots to kernel and "cat /proc/meminfo" reports 8GB of memory. Change-Id: I17bd4f4a00b4e3bbaf845d6d321962c11569a186 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39423 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-15soc/intel/tigerlake: Configure Vmx support using KconfigJohn Zhao
Change VmxEnable UPD value based on Kconfig ENABLE_VMX BUG=None TEST=Built image and booted to kernel. Change-Id: I725474643193223865a135813cf882fd7636d24a Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39438 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2020-03-14mb/google/dedede: Configure WLANKarthikeyan Ramasubramanian
Turn on CNVi device. Turn on PCIe Root port that hosts WLAN device. Configure PCIe Clk Source and Clk Request mapping. Configure GPIOs used for WLAN - both CNVi and M.2. BUG=None TEST=Build the mainboard. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I9bb8e57cdb688bc544929c94af380b9ef1d936a2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39115 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-03-14mb/google/dedede: Add BT Disable GPIO configurationKarthikeyan Ramasubramanian
Disable the BT module in bootblock and enable it in ramstage. This allows for loading the BT firmware during reboot. TEST=Build and boot the mainboard. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I0406a68ffcab2675a1aedb212cb7c8508a5b61fc Reviewed-on: https://review.coreboot.org/c/coreboot/+/39446 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-14mb/google/drallion: Enable GEO SAREric Lai
Enable GEO SAR function. BUG=b:150347463 BRANCH=drallion TEST=NA Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Iace9aa0245840328aa13920512747ca7f60e85dd Reviewed-on: https://review.coreboot.org/c/coreboot/+/39467 Reviewed-by: Mathew King <mathewk@chromium.org> Reviewed-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-14mb/intel/tglrvp: Update GPIO settingWonkyu Kim
Update GPIO reset type from PLTRST to DEEP. DEEP setting is more conservative for S3/S4/S5. Detail information is bug. BUG=b:151305120 TEST=Build and boot to OS Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: Ie7d08560ea2ef3623bbd4734b30c80e707869c7b Reviewed-on: https://review.coreboot.org/c/coreboot/+/39476 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Reviewed-by: Caveh Jalali <caveh@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-14ec/google/chromeec/acpi: Move ECPD under CRECPrashant Malani
Move the ECPD (GOOG0003) device under CREC (GOOG0004) so that the ECPD AP device drivers can access the parent EC device to communicate with the EC. Also, update the Notify() call to reflect the new location of the ECPD device. Signed-off-by: Prashant Malani <pmalani@chromium.org> Change-Id: I830b030c7a063506f50f9cd51df3a5018e248fc2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39469 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-03-13mb/google/volteer: Enable Audio DSP UPDSrinidhi N Kaushik
Provide settings for configuring the link between HD-Audio controller and display unit for purposes of HDMI/DP Audio playback. BUG=b:144708516, b:148385924 TEST=none Change-Id: I225faac68729b28be65b4d8f1f83769a874f84ff Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39356 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-13mb/google/hatch/Kconfig: Disable VBOOT_EARLY_EC_SYNC on PuffEdward O'Callaghan
Early ec sync needs to be disabled for EFS2 to function. BUG=b:151115320 BRANCH=none TEST=none Change-Id: I384d072d9614a5cd30837f7cdfb777ad5e4f6b19 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39461 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-03-12soc/intel/tigerlake: Enable VT-d and generate DMAR ACPI tableJohn Zhao
Tigerlake platform supports Virtualization Technology for Directed I/O. Enable VT-d feature and generate DMAR ACPI table. BUG=None TEST=Booted to kernel and "dmesg | grep DMAR" to verify the DMAR ACPI remapping table existence. Retrieve /sys/firmware/acpi/tables/DMAR and "iasl -d DMAR" to check all entries. Change-Id: Ib89d0835385487735c63062a084794d9da19605e Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38165 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2020-03-12soc/intel/*/smihandler: Only compile in TCO SMI handler if neededPatrick Georgi
commit 7f9ceef disables TCO SMIs unless specifically enabled, so help the linker throw out the function that handles them in that case. Change-Id: Ia3c93b46e979fb8b99282875b188415f249d38dd Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39452 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Michael Niewöhner
2020-03-12mb/google/dedede: Enable trackpad supportPandya, Varshit B
1. Configure trackpad interrupt GPIO. 2. Set i2c0 configuration. 3. Add trackpad ACPI support. TEST= Verify trackpad working. Verify I2C SCL frequency below 400Khz on trackpad operation. Change-Id: I52c578aef591f5be90fb709bab4c8342ea9729e6 Signed-off-by: Pandya, Varshit B <varshit.b.pandya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39236 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-03-12mb/google/hatch: Create nightfury variantraymondchung
Create new variant and build for nightfury. BUG=b:149226871 TEST=FW_NAME="nightfury" emerge-hatch coreboot chromeos-bootimage Change-Id: If08692f4a2d216c57499098cc0e35abd708d99d4 Signed-off-by: Raymond Chung <raymondchung@ami.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38826 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2020-03-12mb/google/volteer: configure L1Substate for PCIeWonkyu Kim
Limit PcieL1Substate for RP9, RP11 for ES1 NVMe warm reboot workaround. Reference: #613582 Tiger Lake PCH-LP Sightings Report issue id #1409566330 BUG=none BRANCH=none TEST= boot to OS and check warm reboot with NVMe Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: Ie85bf71c43427e326ef2ba674da4566f8f51495a Reviewed-on: https://review.coreboot.org/c/coreboot/+/39413 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2020-03-12soc/intel/tigerlake: Configure L1Substates for PCH Root portsWonkyu Kim
Set value for PcieRpL1Substates according to devicetree. Chip config parameter PcieRpL1Substates uses (UPD value + 1) because UPD value of 0 for PcieRpL1Substates means disabled for FSP. In order to ensure that mainboard setting does not disable L1 substates incorrectly, chip config parameter values are offset by 1 with 0 meaning use FSP UPD default. get_l1_substate_control() ensures that the right UPD value is set in fsp_params. Chip config parameter values 0: Use FSP UPD default 1: Disable L1 substates 2: Use L1.1 3: Use L1.2 (FSP UPD default) BUG=none BRANCH=none TEST=Boot up and check FSP log for PCIe config for this values Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: I66743a29ad182bd49b501ae73b79270a9eb88450 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39412 Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-12vboot: remove extraneous vboot_recovery_mode_memory_retrainJoel Kitching
Just call get_recovery_mode_retrain_switch() directly. BUG=b:124141368 TEST=make clean && make test-abuild BRANCH=none Change-Id: Icb88d6862db1782e0218276984e527638b21fd3a Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39343 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-12soc/intel/tigerlake: Enable HDA through dev_enabledSrinidhi N Kaushik
Check for dev enabled status for HDA controller and update the UPD accordingly. BUG=151174264 BRANCH=none TEST=Build and boot tglrvp Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: Id5dfff275ed9906852ef7eb7461fbe89a3a115c5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39441 Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-11mb/google/dedede: Add ACPI configuration for USB portsKarthikeyan Ramasubramanian
Enable USB ACPI driver. Add ACPI configuration for all the USB ports. Since one of the USB ports is used for Bluetooth configure the reset_gpio used by that port. TEST=Build the mainboard. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I3e7b8f00102c96dcc295601359d3ecfbcd1bea00 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39422 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2020-03-11mb/intel/tglrvp: Enable Hybrid storage modeWonkyu Kim
BUG=b:148604250 BRANCH=none TEST=Build and test booting TGLRVP form NVMe and Optane Check PCIe lane configuration Show all the NVMe devices lspci -d ::0108 Show all the NVMe devices and be really verbose lspci -vvvd ::0108 Print PCIe lane capabilities and configurations for all the NVMe devices. lspci -vvvd ::0108 | grep -e x[124] Print all the PCIe information of the device ae:00.0 lspci -vvvs ae: Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: I5fc8fa0897ad006de9ebe20115bf3033e1e1b499 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39233 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
2020-03-11soc/intel/common/block/smm: add case intrusion to SMI handlerMichael Niewöhner
This adds case intrusion detection to the SMI handler. At this point one can add the code to be executed when the INTRUDER signal gets asserted (iow: when the case is opened). Examples: - issue a warning - trigger an NMI - call poweroff() - ... Tested on X11SSM-F. Change-Id: Ifad675bb09215ada760efebdcd915958febf5778 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39265 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-03-11mb/google/dedede: Add SPD hex file for Samsung memory partMeera Ravindranath
BUG=b:150154457 BRANCH=none TEST=Build dedede, flash and boot to kernel. Change-Id: I7248861efd1edd5a0df0e17d39a47c168cab100e Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39348 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-11superio/nuvoton/nct5539d: Update documentation and remove DSDTPatrick Rudolph
There seems to be no board using this, but some currently under review. Remove the DSDT, which doesn't work together with the SSDT ACPI code generation. Also update the documentation pointing to the SSDT generator. Change-Id: I8b7daeadaaac93d74ee2fc9eb18f0eff5ef50eb3 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38864 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-11drivers/intel/gma/acpi: Prevent DivideByZero errorPatrick Rudolph
In case backlight control isn't enabled BCLM is zero. Return early instead of running into a DivideByZero error. This happens on devices that don't have backlight control, like desktops and servers. The proper fix is to not include those ACPI methods, but that requires a much bigger refactoring. Change-Id: Ie9bdb00949d6d44fd99321db556d6008d2d12a7f Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39158 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-11soc/intel/tigerlake: Save DIMM info by available nodesJamie Ryu
TEST=Verified that dmidecode produces output identical to private repo Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com> Change-Id: I951ea94c280b7dd5b67f320a264d13fca82a4596 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39359 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-11mb/google/drallion/variants/drallion: Set PCH Thermal Trip point to 77°CSumeet Pawnikar
PMC logic shuts down the PCH thermal sensor when CPU is in a C-state and DTS Temp <= Low Temp Threshold (LTT) in case of Dynamic Thermal shutdown when S0ix is enabled. BUG=None BRANCH=None TEST=Verified Thermal Device(B0: D18: F0) TSPM offset 0x1c [LTT (8:0)] value is 0xFE on Drallion. Change-Id: I146068d8019859be1c27e2a8174dfe7909d42d0a Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39395 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
2020-03-11mb/google/hatch: Add LP_4G_2133 SPDraymondchung
Add LPDDR3 4GB 2133MHz SPD file. BUG=b:149226871 TEST=Build and check cbfs has the spd.bin Change-Id: I1598774a87eecc76082286540beadaa3c26eda69 Signed-off-by: Raymond Chung <raymondchung@ami.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39271 Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Philip Chen <philipchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-11mb/google/volteer: Enable pcie rp11 for optaneVenkata Krishna Nimmagadda
Optane memory module shows up as 2 NVMe devices in x2 config - NVMe storage device and NVMe Optane memory. Storage device uses rp9 and optane memory uses rp11. This patch enables rp11. Please note that these two share clk related pins. Configuring pciecontroller3 to be set from 2x2. This will by done by auto detecting optane memory: enabling HybridStorageMode. BUG=b:148604250 BRANCH=chromeos TEST='Build, boot and look for two NVMe devices with lspci on Volteer' Cq-Depend: chrome-internal:2501837 Signed-off-by: Venkata Krishna Nimmagadda <venkata.krishna.nimmagadda@intel.com> Change-Id: I5430829b496ed275e2e3bda3c0bf21c3d2132628 Reviewed-on: https://chrome-internal-review.googlesource.com/c/chromeos/third_party/coreboot-intel-private/jsl-tgl/+/2424428 Tested-by: Wonkyu Kim <wonkyu.kim@intel.corp-partner.google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39420 Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Caveh Jalali <caveh@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-11soc/intel/tigerlake: Correct FSP log interfaceRonak Kanabar
select correct UART settings according to Kconfig DEBUG_INTERFACE_UART: Legacy UART DEBUG_INTERFACE_SERIAL_IO: PCH UART Add check for DEBUG_INTERFACE_TRACEHUB selection and set "PcdDebugInterfaceFlags" UPD accordingly. BUG=None TEST=boot jslrvp board with Debug FSP and check FSP UART log Change-Id: I7be7f93082f9c64c1c45963d70ee2e3b3d29986a Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39280 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
2020-03-11soc/intel/tigerlake: Fix stale device pointer usageKarthikeyan Ramasubramanian
TEST=Build the mainboard. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I43cccd32589d75a9b0c7e60f8c82b19bbe6b69a7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39405 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
2020-03-11mb/google/volteer: Disable WWAN PCIeAlex Levin
Disable WWAN PCIe to allow WWAN enumerate as USB on Volteer. BUG=b:146226689 BRANCH=none TEST=lsusb shows WWAN device Change-Id: I04e49e3ec989d20ea3469fce06051c475b0ed0c8 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39421 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-03-11commonlib/cbfs.c: Remove unused macroElyes HAOUAS
Change-Id: I330de4357fa48ee3d76a97a682b389ef42e7a135 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39410 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-03-11mb/intel/tglrvp: sync up variant folders with latest up3Wonkyu Kim
During intial UP4 patch, below UP3 patches merged which should be applied for UP4. https://review.coreboot.org/c/coreboot/+/39201 https://review.coreboot.org/c/coreboot/+/39229 Merge these patches to UP4 BUG=none BRANCH=none TEST=Build TGL UP4 Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: I7b24cb2b0d03309cf67c6c21ddc2031a054f6110 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39419 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Reviewed-by: Shaunak Saha <shaunak.saha@intel.com>
2020-03-11soc/intel/common/block: tco: enable intruder SMI if selectedMichael Niewöhner
Set TCO to issue an SMI when the case instrusion switch gets pressed. The SMI is controlled along with the general TCO SMI Kconfig. Tested on X11SSM-F. Change-Id: I3bc62c79ca3dc9e8896d9e2b9abdc14cfa46a9e7 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39264 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-03-11mb/biostar/am1ml: Remove old reference to olivehillplusElyes HAOUAS
Change-Id: I219fb2c12bb865288364f6e48b1e3d64c14bc036 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39079 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-03-11mb/asus/am1i-a: Remove old reference to olivehillplusElyes HAOUAS
Change-Id: Idfb8c834ae63226546a4e2860d9b206ba0288718 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39078 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-03-11mb/amd/olivehillplus: Drop unmaintained ROMCC boardElyes HAOUAS
Remove unmaintained and unsupported old ROMCC board. This board wasn't hooked up for build. Change-Id: Ie79637c992874bd06009ed9b3e9f470b44e749b7 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39064 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-11mb/amd/bettong: Drop unmaintained ROMCC boardElyes HAOUAS
Remove unmaintained and unsupported old ROMCC board. This board wasn't hooked up for build. Change-Id: I1bce09ba5041a6636f900de611846467653f35a9 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39069 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-11mb/amd/db-ft3b-lc: Drop unmaintained ROMCC boardElyes HAOUAS
Remove unmaintained and unsupported old ROMCC board. This board wasn't hooked up for build. Change-Id: Ib4a95c650cc4d1cddc2ba530c12ce448a1943b34 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39068 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-11mb/amd/lamar: Drop unmaintained ROMCC boardElyes HAOUAS
Remove unmaintained and unsupported old ROMCC board. This board wasn't hooked up for build. Change-Id: Iaa812dc66ddc14c24263a68e73115502ba5e2417 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39066 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-11intel/i945: Call fixup_i945_errata() only for mobile versionElyes HAOUAS
Per Mobile Intel ® 945 Express Chipset Family - Specification Update Document Number: 309220-013 (page 15), the power saving optimization Erratum is for Mobile Intel ® 945 Express Chipset family. So rename 'fixup_i945_errata()' to 'fixup_i945gm_errata()' and apply that function only for I945GM. Change-Id: I2656021b791061b4c22c0b252656a340de76ae5e Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37188 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-11prog_loaders: Remove CONFIG_MIRROR_PAYLOAD_TO_RAM_BEFORE_LOADINGJulius Werner
This option is not used on any platform and is not user-visible. It seems that it has not been used by anyone for a long time (maybe ever). Let's get rid of it to make future CBFS / program loader development simpler. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I2fa4d6d6f7c1d7a5ba552177b45e890b70008f36 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39442 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-03-11cbfs: Remove unused functionsJulius Werner
cbfs_boot_load_stage_by_name() and cbfs_prog_stage_section() are no longer used. Remove them to make refactoring the rest of the CBFS API easier. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: Ie44a9507c4a03499b06cdf82d9bf9c02a8292d5e Reviewed-on: https://review.coreboot.org/c/coreboot/+/39334 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-03-11mb/google/puff: Enable cros_ec_keyb deviceKangheui Won
This is required to transmit button information from EC to kernel. BUG=b:150830342 BRANCH=None TEST=firmware_ECPowerButton test passes on puff Change-Id: I10ba9d55e8997ce2412deb0613cfcaa8f24f271d Signed-off-by: Kangheui Won <khwon@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39391 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2020-03-10soc/intel/common: Add more GPIO definition macrosNico Huber
Make i/o-standby state and termination configurable for GPIs. Change-Id: Id1a3c00aa8a857afa08e745b0b6a578b01fa6d47 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31350 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-03-10soc/intel/dnv: Set INT_LINE accouting for PIRQ routing & swizzlingStephen Douthit
This code also sets unused interrupt lines to the recommended safe value of 0xff instead of ignoring such devices. Change-Id: I7582b41eb3288c400a949e20402e9820f6b72434 Signed-off-by: Stephen Douthit <stephend@silicom-usa.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34714 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-03-10soc/intel/dnv: Add ACPI _PRT methods for virtual root portsStephen Douthit
This eliminates Linux kernel warnings that look like: pcieport 0000:00:17.0: can't derive routing for PCI INT B ixgbe 0000:07:00.1: PCI INT B: no GSI - using ISA IRQ 10 Change-Id: I2029e7a8252b9e48c1df457d8da5adce7d1ac21d Signed-off-by: Stephen Douthit <stephend@silicom-usa.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34713 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-03-10soc/intel/dnv: Fix ACPI reporting of root port interrupt routingStephen Douthit
pcie_port.asl defines an IRQM method that looks up legacy interrupt swizzling based on incoming interrupt "pin" A-D and root port number. Unfortunately the 8-bit root port number stored at offset 0x4F in the config space matches the device number, not the 1-8 scheme used in the LUT reported to the OS. Fix the case values to match the hardware. Change-Id: I103d632a4bc99461f02e05aa0f9a9eb7376770d9 Signed-off-by: Stephen Douthit <stephend@silicom-usa.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34712 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-03-10mb/intel/{saddlebrook,kunimitsu}: Add macro for SaGv configPraveen Hodagatta Pranesh
Change-Id: Ia31da9997ba46c15cd385bf55e009cf299848b64 Signed-off-by: Praveen Hodagatta Pranesh <praveenx.hodagatta.pranesh@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36423 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-10src: Remove unneeded 'include <arch/cache.h>'Elyes HAOUAS
Change-Id: I6374bc2d397800d574c7a0cc44079c09394a0673 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37984 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-10winbond/w83667hg-a: Disable mouse controller also during resumePaul Menzel
There is no reason to not disable the controller during resume. That way, no ASL is needed. Change-Id: I282a03647ee0958abb118fafe306abe5782db71c Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/22286 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-03-10soc/intel/dnv: Don't clobber SATA_MAP while trying to set modeStephen Douthit
SATA Mode Select is bit 16 of the SATA General Configuration register. This code currently incorrectly pokes at the Port Clock Disable bits in the Port Mapping Register, and without clock the affected ports can't link. Change-Id: I37104f520a869bd45a32cfd271d0b893aec3c8ed Signed-off-by: Stephen Douthit <stephend@silicom-usa.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34663 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Vanessa Eusebio <vanessa.f.eusebio@intel.com> Reviewed-by: David Guckian Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-03-10soc/intel: fix eist enablingMatt Delco
There was a bug like this for skylake that seems to have been copied to other SoCs. Signed-off-by: Matt Delco <delco@chromium.org> Change-Id: Ib4651eda46a064dfb59797ac8e1cb8c38bb8e38c Reviewed-on: https://review.coreboot.org/c/coreboot/+/39411 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-03-10soc/intel/xeon-sp,mb/ocp/tiogapass: Don't fake binariesNico Huber
If we don't pretend to have binaries, there is no need to add fake ones. This also fixes building the default config. Change-Id: I8f933f24a734a9ce3d82ef57f7f234ee4dfa86e9 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39383 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: David Hendricks <david.hendricks@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>