summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2020-12-08mb/google/volteer/variants: Update Power Limit2 minimum valueSumeet R Pawnikar
Update Power Limit2 (PL2) minimum value to the same as maximum value for volteer variants like baseboard, delbin, eldrid, terrador and todor. All other variants uses the DTT entries from baseboard devicetree since there is no override present for those variants. DTT does not throttle PL2, so this minimum value change here does not impact any existing behavior on the system. BUG=None BRANCH=volteer TEST=Build and test on volteer system Change-Id: I568e87c87ef517e96eaab3ff144b1674d26ae1e6 Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48292 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-12-08soc/intel/common/gpio_defs: Add PAD_TRIG(OFF) in PAD_CFG_GPI_GPIO_DRIVERKaiyen Chang
Probabilistic interrupt storm is observed while kernel is configuring the GPIO for SD card CD pin. The root cause is that the macro PAD_CFG_GPI_GPIO_DRIVER isn't configuring trigger as PAD_TRIG(OFF). The way GPIO interrupts are handled is: 1. Pad is configured as input in coreboot. 2. Pad IRQ information is passed in ACPI tables to kernel. 3. Kernel configures the required pad trigger. Therefore, PAD_TRIG(OFF) should be added in PAD_CFG_GPI_GPIO_DRIVER to turn off the trigger while pad is configured as input in coreboot and then let kernel to configure the required pad trigger. BUG=b:174336541 TEST=Run 1500 reboot iterations successfully without any interrupts storm. Signed-off-by: Kaiyen Chang <kaiyen.chang@intel.corp-partner.google.com> Change-Id: Icc805f5cfe45e5cc991fb0561f669907ac454a03 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48302 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2020-12-08drivers/i2c/tpm: Unconditionally allow I2C TPM ACPI nodeJes Klinke
DRIVER_I2C_TPM_ACPI is used to enable the "driver" needed for coreboot to present a TPM node in the devicetree. It would usually only do so, if coreboot itself is communicating with the TPM via I2C (I2C_TPM). However, technically, there is no dependency. In order to not show the ACPI option in menuconfig if the board is not using I2C, a dependency was declared in Kconfig. However, the same can be achieved without making it an error to manually declare DRIVER_I2C_TPM_ACPI without I2C_TPM. For Volteer, we have just such a need, since it has two "sub-variants" sharing the same overridetree.cb, one having SPI TPM and another having I2C TPM. The former will have a disabled ACPI node representing the I2C TPM, while its Kconfig is such that coreboot itself does not have I2C TPM support. In order to export even a disabled ACPI node representing the I2C connected TPM, coreboot needs DRIVER_I2C_TPM_ACPI. Hence, that will have to be enabled in a case where coreboot does not have I2C_TPM (for one of the two sub-variants, namely volteer2). BUG=b:173461736 TEST=Tested as part of next CL in chain Change-Id: I9717f6b68afd90fbc294fbbd2a5b8d0c6ee9ae55 Signed-off-by: Jes Bodi Klinke <jbk@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48222 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-08soc/intel/common/usb4: Add ADL-P DMA0/1 ID into USB4 common codeSubrata Banik
Change-Id: Id014828d282350bcb1f4de295d5cfb72b6950634 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48393 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: V Sowmya <v.sowmya@intel.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-12-08soc/intel/common/block/cpu/car: Fix two whitespace issuesSubrata Banik
This patch removes 1 unnecessary whitespace and add 1 whitespace into IA common car code block. Change-Id: I3690b5f219f5326cfca7956f21132062aa89648e Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48381 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-12-07nb/intel/ironlake: Introduce memmap.hAngel Pons
Move all memory map definitions into a separate header. Tested with BUILD_TIMELESS=1, Packard Bell MS2290 remains identical. Change-Id: I1f37ad9cae39041f98871c613b308b5ac5da01b3 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45379 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-07nb/intel/ironlake: Drop casts from DEFAULT_{MCHBAR,DMIBAR}Angel Pons
There's no need to wrap these macros with casts. Removing them allows dropping more casts in `early_init.c`. To avoid binary changes the casts are put into the {MCH,DMI,EP}BAR{8,16,32} macros instead where they are needed to reach the right memory locations. Change-Id: Icff7919f7321a08338db2f0a765ebd605fd00ae2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45378 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-07nb/intel/i945: Introduce memmap.hPatrick Georgi
Inspired by Idca25b2e4bf65abcb and Ib275f9ad8ca9ff move all memory map definitions into a header with a common name. Change-Id: I32a99f70f4d2eb52367c9edfc0aa6d5da2fec03f Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48234 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-12-07soc/intel/skl: set PEG port state to autoMichael Niewöhner
Setting PegXEnable to 1, statically enables the PEG ports, which blocks the SoC from going to deeper PC states. Instead, set the state to "auto" (2), so the port gets disabled, when no device was detected. Note: Currently, this only works with the AST PCI bridge disabled or the VGA jumper set to disabled on coreboot, while it works on vendor in any case. The reason for this is still unclear. Test: powertop on X11SSM-F shows SoC in PC8 like on vendor firmware instead of just PC3 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: I3933a219b77d7234af273217df031cf627b4071f Reviewed-on: https://review.coreboot.org/c/coreboot/+/48304 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-12-07sb/intel/common: Modify CONFIG_LOCK_MANAGEMENT_ENGINE behaviorSridhar Siricilla
The patch modifies KConfig behaviour if CSE Lite SKU is integrated into the coreboot. When the CSE Lite SKU is integrated, the KConfig prevents writing to ME region but keeps read access enabled. Since CSE Lite driver checks the signature of RW partition to identify the interrupted CSE firmware update, so host must have read access to the ME region. Also, the patch modifies the KConfig's help text to reflect the change. When CSE Lite SKU is integrated, master access permissions: FLMSTR1: 0x002007ff (Host CPU/BIOS) EC Region Write Access: disabled Platform Data Region Write Access: disabled GbE Region Write Access: disabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: enabled Flash Descriptor Write Access: disabled EC Region Read Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: disabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: enabled Flash Descriptor Read Access: enabled BUG=b:174118018 TEST=Built and verified the access permissions. Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I2f6677ab7b59ddce827d3fcaae61508a30dc1b28 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48267 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
2020-12-07mb/google/volteer/var/elemi: use devtree aliases for PMC MUX connectorsWisley Chen
refer to cb:45878 Now that soc_get_pmc_mux_device() is gone, the PMC MUX connector devices can be hooked up together via devicetree aliases. BUG=b:174735512 BRANCH=volteer TEST=build and type-c display work Change-Id: I0bf84e2691856c9760d8fa9b6d853b04be10390a Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48268 Reviewed-by: YH Lin <yueherngl@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-07common/block/cse: Rename cbfs_boot_load_file() to cbfs_load()V Sowmya
This patch renames the cbfs_boot_load_file() to cbfs_load() to avoid the build errors for cselite and align with the new changes to API https://review.coreboot.org/c/coreboot/+/39304 . Change-Id: I717f0a3291f781cc3cf60aae88e7479762ede9f9 Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48291 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-07vc/intel/fsp/fsp2_0/cooperlake_sp: Update WW47 FSP Memory map HOBJohnny Lin
Tested=On OCP Delta Lake, verify the memory map hob data are correct. Change-Id: I7bb2e9f41daa4cbce49169535eadf7f0d4972716 Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48228 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Zhang <jonzhang@fb.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-12-07mb/intel/adlrvp: Remove GPP_E0Meera Ravindranath
Remove the unused UART_BT_WAKE GPIO as BT is over USB. Change-Id: I638b4528fa5c4c378a1e8ff7bb88546da1513df2 Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48240 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2020-12-06soc/amd/picasso: drop unused cpu/amd/mtrr from MakefileFelix Held
TEST=Timeless build of mb/amd/mandolin results in identical image. Change-Id: Ib1337f64ea7057cf04ca92bdef66e35cc350625d Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48365 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-12-06soc/amd/cezanne: add config.c and minimal chip.hFelix Held
Change-Id: I89f08c201bd7d9a11b186ef960abe9714a76fb97 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48317 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-12-06soc/amd/picasso/config: add comment about cfg never being NULLFelix Held
Change-Id: I39cf2d28749536cb7d9462fa4af412850677f2e3 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48354 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-12-06soc/amd/picasso: remove config_t typedefFelix Held
Change-Id: Idc0061e7b88134ab17cb65429133cffd16ca5651 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48316 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-12-06soc/amd/picasso/chip.h: remove unneeded extern pci_domain_opsFelix Held
Now pci_domain_ops in chip.c can also be marked as static. Change-Id: Ia92b778a5882d991b391dc29aeee0a5615677913 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48315 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-06soc/amd/stoneyridge: remove unused config_t typedefFelix Held
Change-Id: I1456fe069c4b0cf859f769e0144ec62cff0f3987 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48319 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-12-06soc/amd/stoneyridge/chip.h: remove unneeded extern pci_domain_opsFelix Held
Now pci_domain_ops in chip.c can also be marked as static. Change-Id: I5e481fe311c9db4aacfd94bbf671edf679528946 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48318 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-12-06soc/amd/stoneyridge/acpi/sb_fch: use existing base address definesFelix Held
TEST=Identical timeless build for amd/gardenia. Change-Id: I04952cdbbe7893f35a674a156a9bc22202fbdc2f Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48311 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-06include/device/device: add comment that config_of_soc never returns NULLFelix Held
Since config_of() calls die() if dev or dev->chip_info are NULL, config_of_soc() will either return a non-NULL pointer or won't return. Change-Id: I6de6bb1610e823af215436c94ff1a78ff6b86b78 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48359 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2020-12-06soc/amd/picasso/Makefile: use all-y for adding config.c to the buildFelix Held
Since config.c also gets linked into verstage on PSP and not only into the stages running on the x86 cores, use all-y instead of adding config.c to all classes separately. Change-Id: Icacb13e73e80e6f3d8c2141784702fb895daf7db Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48313 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-12-06soc/amd/cezanne: use common TSC and monotonic timer codeFelix Held
Change-Id: I9bc82f1e64f2cf21bfa4bf1ac75d17247208686c Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48306 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-06soc/amd: factor out common family 17h&19h TSC and monotonic timer codeFelix Held
The corresponding MSRs of all AMD family 17h and 19h CPUs/APUs match the code. Change-Id: I29cfef5d8920c29e36c55fc46a90eb579a042b64 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48305 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-12-06soc/amd/common/block/cpu: move Makefile guards into subfoldersFelix Held
The next patch will add a tsc subfolder that might end up containing code that is guarded with different Kconfig options, so move the guards into the Makefiles in the subfolders instead of guarding the inclusion of the Makefiles in the subdirectories with the corresponding Kconfig option. Change-Id: Iafc867eb9adcb23e9a4878cc381684db6f9692d5 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48312 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-12-06mb/*: Remove unnecessary selectsFelix Singer
Remove SOC_INTEL_COMMON_BLOCK_HDA from mainboards Kconfig since it is selected by their SoC soc/intel/cannonlake. Change-Id: I9597746a217575b42f6325998b948e16b452231a Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48289 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-06mb/siemens/chili: Move mainboard/gpio.h to variant/gpio.hFelix Singer
Move mainboard/gpio.h to variant/gpio.h and rename its methods to make clear that these methods are implemented on variant level. Change-Id: Ib4e7ec948ca4d019ad82ebc5abe39fc408281cf4 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48299 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-06mb/clevo/kbl-u: Add a seperate method for early GPIOsFelix Singer
Add variant_configure_early_gpios() configuring early GPIOs to make the difference clear. Change-Id: I6e7c8c32963c9eeab4399947dac511442987cb45 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48298 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-06mb/clevo/kbl-u: Move mainboard/gpio.h to variant/gpio.hFelix Singer
Move mainboard/gpio.h to variant/gpio.h and rename its methods to make clear that these methods are implemented on variant level. Change-Id: Ibcb6322067285984bad70761fce34cfcb6ed8e0f Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48297 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-06mb/clevo/cml-u: Move mainboard/gpio.h to variant/gpio.hFelix Singer
Move mainboard/gpio.h to variant/gpio.h and rename its methods to make clear that these methods are implemented on variant level. Change-Id: I1ae9b54ed683000f65323b11747ce3280a1c7f2a Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48296 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-05soc/amd/stoneyridge: order selected Kconfig options alphabeticallyFelix Held
TEST=Timeless build doesn't change for amd/gardenia. Change-Id: I5f1873111c07f6dc823b06654e463830d83acc9e Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48308 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-12-05soc/amd: Fix X86_RESET_VECTOR location in commentsKyösti Mälkki
Change-Id: I3e4b3cbed8abe3988d9f48c13d01400af75a4776 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48307 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-05amd_blobs: Always set default pathsNico Huber
Don't make the default paths to AMD blobs depend on USE_AMD_BLOBS. This way we get error messages about the missing files when the blobs repos aren't checked out. Change-Id: I754fdc5e1414c8a3dc88b364bcfbea9a26b59eb0 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38044 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-12-05mb/prodrive/hermes: Generalise `check_signature` functionAngel Pons
Allow to specify which signature is to be checked. Change-Id: Ica874b1c4283fdb8dbd702c34ccb3315a2cf160d Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48147 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-12-05mb/google/dedede: Create storo variantTao Xia
Create the storo variant of the waddledee reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.3.1). BUG=b:174284884 BRANCH=None TEST=util/abuild/abuild -p none -t google/dedede -x -a make sure the build includes GOOGLE_STORO Signed-off-by: Tao Xia <xiatao5@huaqin.corp-partner.google.com> Change-Id: I5ad41e0b2bc95b44733a2ad3c543267f3f56f9e7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48227 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Xuxin Xiong <xuxinxiong@huaqin.corp-partner.google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2020-12-05soc/amd/picasso/tsc: fix clock divisor range checkFelix Held
The CPU core clock divisor ID needs to be in the range from 8 to 0x30 including both numbers. TEST=Compared with Picasso's PPR #55570 Change-Id: Ie5ee342d22294044a68d2f4b2484c50f9e345196 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48287 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-12-05mb/amd/majolica: add functionality to add EC blob to buildFelix Held
Without the EC blob being present in the SPI flash, the board won't even power up. Change-Id: Ia3c50e86414bbc707bc33e28c636196c1be2f1e6 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48250 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-12-05mb/amd/majolica: add skeleton of Cezanne reference boardFelix Held
This is an adapted copy of mainboard/example/min86 that is currently only used for Jenkins to test the SoC code in soc/amd/cezanne and isn't expected to reach boot block at the moment. It will be extended in future follow-up commits. Change-Id: I6806955952fbfa3227294cfc44fdf9156140e933 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48238 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-12-05soc/amd/cezanne: add skeleton for new SoCFelix Held
This is based on the minimal example code in soc/example/min86 and was adapted to use the AMD non-CAR boot block and the common AMD PCI MMCONF support. In its current state this won't even reach the boot block, but will pass the build bot. The missing parts for that will be added in future patches. This is an attempt to not go the usual route to create a copy of a previous SoC generation and the make changes to the code to work for the new SoC, but to start from a nearly empty directory and then add the actual code stage by stage and component by component. Change-Id: I70aeb9ae010e943abfa667a0ea95c6fa9f15b7f5 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48237 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-12-05mb/google/volteer/var/voema: Add MIPI camera supportDavid Wu
1. Add VARIANT_HAS_MIPI_CAMERA to Kconfig.name 2. Add mipi_camera.asl BUG=b:169356808,b:169551066 TEST=FW_NAME=voema emerge-volteer coreboot chromeos-bootimage Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I63d133246dbdc6aff7bf97d98f95052edf53bac9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47668 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-05mb/google/puff/var/dooly: Update DPTF parametersTony Huang
DPTF paramerters form thermal team. Set PL1 Min/Max 15/25W, PL2 Min/Max 40/49W. BUG=b:174514010 BRANCH=puff TEST=build image and verified by thermal team. Change-Id: I9e6c4bae181e87f87f2e92337bb9d989f5b7d955 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48206 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sam McNally <sammc@google.com> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2020-12-05mb/google/zork: set APU_EDP_BL_DISABLE to low as defaultChris Wang
set APU_EDP_BL_DISABLE(GPIO_85) to low to avoid the VARY_BL fast than APU_DP_BLON. BUG=b:171954512 BRANCH=zork TEST=validate the panel sequence with scope. Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com> Change-Id: Ia6d3f4335583bb2d91a6bce96d89cff84247d0ad Reviewed-on: https://review.coreboot.org/c/coreboot/+/48203 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org>
2020-12-05mb/google/volteer: Create copano variantFrankChu
Create the copano variant of the volteer reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.3.1). BUG=b:174413884 BRANCH=None TEST=util/abuild/abuild -p none -t google/volteer -x -a make sure the build includes GOOGLE_COPANO Signed-off-by: FrankChu <frank_chu@pegatron.corp-partner.google.com> Change-Id: Ib06625f492f68a6a6f5c6b382772b68f1eb681ef Reviewed-on: https://review.coreboot.org/c/coreboot/+/48136 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Zhuohao Lee <zhuohao@chromium.org>
2020-12-05drivers/intel/fsp2_0/memory_init: Wrap calls into FSPPatrick Rudolph
Use a wrapper code that does nothing on x86_32, but drops to protected mode to call into FSP when running on x86_64. Tested on Intel Skylake when running in long mode. Successfully run the FSP-M which is compiled for x86_32 and then continued booting in long mode. Change-Id: I9fb37019fb0d04f74d00733ce2e365f484d97d66 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48202 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-05cpu/x86/64bit: Add code to call function in protected modePatrick Rudolph
This adds a helper function for long mode to call some code in protected mode and return back to long mode. The primary use case is to run binaries that have been compiled for protected mode, like the FSP or MRC binaries. Tested on Intel Skylake. The FSP-M runs and returns without error while coreboot runs in long mode. Change-Id: I22af2d224b546c0be9e7295330b4b6602df106d6 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48175 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-12-05mb/google/volteer/variant/lindar: Correct SD card reader power sequenceKevin Chang
According to the spec provided by Bayhub, the 3.3V power rail must be enabled at least 100ms before reset is released. To ensure this, set the power enable signal in the bootblock GPIO table. BUG=b:173676531 BRANCH=firmware-volteer-13521.B TEST=Built and booted into OS, test USB function normally. Change-Id: I0c536f36c138ace93766f3024f6ec5d47b38269f Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47799 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-05mb/google/zork: Replace generic driver with sx9324 driverEric Lai
Use a new driver for the SX9324 proximity detector device. This is first draft settings, will modify it after fine tuning. BUG=b:172397658 BRANCH=zork TEST=run "i2cdump -y -f 0 0x28" and checked all registers are expected. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I869d0b6640247099ca489e96ed94e03811a04bf4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47867 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Kangheui Won <khwon@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-05drivers/i2c/sx9324: Add more registers and reorderEric Lai
Export all registers that driver is looking for. And put in alphabetic order. The missing registers for kernel v5.4 sx93xx are: reg_irq_msk reg_irq_cfg0 reg_irq_cfg2 reg_afe_ph0/1/2/3 BUG=b:172397658 BRANCH=zork TEST=Build passed Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Ic9d7a959b1769b6846bba302e3aeab9a3a1cedac Reviewed-on: https://review.coreboot.org/c/coreboot/+/47866 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-05mb/google/zork/var/vliboz: Add LTE_RST power sequenceEric Lai
Latest HW schematic add LTE_RST pin to control module power sequence. BUG=b:173490220 BRANCH=zork TEST=measure the waveform is meet the LTE module spec. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I0f0a35a905d711dd8d17dea2ae82a8dfa1fa05ed Reviewed-on: https://review.coreboot.org/c/coreboot/+/47912 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-12-05mb/google/dedede/var/drawcia: Configure Acoustic noise mitigation UPDsMaulik V Vaghela
Enable Acoustic noise mitigation for drawcia and set slew rate to 1/4 which is calibrated value for the board. Other values like PreWake, Rampup and RampDown are 0 by default. BUG=b:162192346 BRANCH=dedede TEST=Correct value is passed to UPD and Acoustic noise test passes. Change-Id: Iadcf332d59dac2ba191b82742a18a1ab326940d1 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48231 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-12-05soc/intel/jasperlake: Add Acoustic noise mitigation configurationMaulik V Vaghela
This patch exposes acoustic noise mitigation related UPDs/configuration to be filled from devicetree. For each variant, we might have different values for various parameters. Filling it from devicetree will allow us to fill separate values for each board/variant. Note that since JasperLake only has one VR, we're only filling index 0 for slew rate and FastPkgCRampDisable. BUG=b:162192346 BRANCH=dedede TEST=code compilation is successful and values from devicetree are getting reflected in UPDs Change-Id: Id022f32acc3fd3fe62f78e3053bacdeb33727c02 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47879 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-12-05soc/intel/xeon_sp: Don't use common block acpi.hMarc Jones
Don't use the common block acpi.h when we aren't using the COMMON_ACPI config. Fixes a dependency build issue in an upcoming commit. Change-Id: I3b80f7bbdf81e594fdde5b750c666edd8ca7268d Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48254 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com> Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
2020-12-05soc/intel/common/block/usb4: Add the PCI ID for ADLV Sowmya
This patch adds the PCI device ID for Alderlake CPU xHCI. Change-Id: I4074a81aa9be2ef3a0956da08bece32a613415ab Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48271 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2020-12-05device/pci_id: Add TCSS PCI IDs for AlderlakeV Sowmya
Add the PCI IDs for Alderlake TCSS, * USB xHCI * USB xDCI * TBT DMA * TBT PCIe Change-Id: I28bb310c7b031d2766c9e03dbcbe1c79901a7d87 Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48242 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-04cbfs: Add more error messages for lookupJulius Werner
The new CBFS stack will log messages for found files but leaves error messages up to the caller. This patch adds appropriate generic error messages to cbfs_lookup(), matching the behavior of the old CBFS stack for not found files. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I8cf44026accc03c466105d06683027caf1693ff0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48278 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-12-04soc/amd/picassso/acpi: increase MMIO region size of GPIO controllerFelix Held
The GPIO controller on Picasso has 4 banks of GPIOs with a size of 256 bytes each, so increase the reserved size to match the hardware. Also replace the base GPIO address with the corresponding define. Change-Id: I453f1c531d612a0e82ee0d91762fec6cdb2b8556 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48270 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-12-04mb/google/brya: Initiate device treeEric Lai
Initiate device tree based on latest schematic. BUG=b:174266035 TEST=Build Test Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Ia94119cb6d7eff6ea13c7d6a7dfd6ce891f706fd Reviewed-on: https://review.coreboot.org/c/coreboot/+/48139 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-12-04soc/intel/alderlake: Align chipset.cb with pci_devs.hEric Lai
Refer pci_devs.h naming to align chipset.cb. Correct thc0, thc1 and add cnvi_bt. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Iac33983dc12ed4e5b9257c50d82adc8e4e728ad6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48153 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-04mb/google/brya: Add EC smihandlerEric Lai
Add implementation of EC smihandler BUG=b:174266035 TEST=Build Test Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I211f5755ff44514ab7ab4083f684ddd88c23fe48 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48115 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-04mb/google/brya: Enable ECEric Lai
Perform EC initialization in bootblock and ramstages. Add associated ACPI configuration. BUG=b:174266035 TEST=Build Test Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Ie1305706134ca7cc58b8a9941231d1ee14f80949 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48114 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-12-04mb/google/brya: Enable building for Chrome OSEric Lai
Enable building for Chrome OS and add associated ACPI configuration. BUG=b:174266035 TEST=Build Test Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I5311879a127a2c8da1bbb086449019d932d57b72 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48111 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-12-04mb/google/brya: Set UART consoleEric Lai
Follow latest schematic UART_PCH_DBG is UART 0. BUG=b:174266035 TEST=Build Test Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I8e334fee1adcd79d058b7ab07127f8ecf1735202 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48070 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-04mb/google/brya: Enable ACPI and add ACPI tableEric Lai
Enable ACPI configuration and add DSDT ACPI table. BUG=b:174266035 TEST=Build Test Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I08513ec159b69535f742a1fd70cdec9ec845d414 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48069 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-12-04Coachz: change EN_PP3300_DX_EDP from gpio52 to gpio67yuanliding
Coachz rev1 has changed EN_PP3300_DX_EDP from gpio52 to gpio67. BRANCH=none BUG=b:174123578 TEST=emerge-strongbad coreboot chromeos-bootimage. flash coreboot and boot up normally. Signed-off-by: yuanliding <yuanliding@huaqin.corp-partner.google.com> Change-Id: I32a721d0d725bf217debe35a5cdc01aa8f5d5daf Reviewed-on: https://review.coreboot.org/c/coreboot/+/48224 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2020-12-04cpu/x86/smm_module_loaderv2: Fix compiling for x86_64Arthur Heymans
Change-Id: I9288ede88f822ff78dd9cb91020451dc935203a0 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48263 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Christian Walter <christian.walter@9elements.com>
2020-12-04soc/amd: move smi_util to common blockFelix Held
The functionality in smi_util applies for all 3 AMD SoCs in tree. This patch additionally drops the HAVE_SMI_HANDLER guards in the common block's Makefile.inc, since all 3 SoCs unconditionally select HAVE_SMI_HANDLER in their Kconfig and smi_util doesn't use any functionality that is only present when that option is selected. Change-Id: I2f930287840bf7aa958f19786c7f1146c683c93e Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48220 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-12-04mb/amd/mandolin: Unify devicetree formatting for 00:14 devicesPaul Menzel
To accommodate also `off`, two spaces are used after `on` to align comments. This unifies the devicetree files of the two variants. Change-Id: I7908fe2313ddccb6a4448a6338d6cd4938264f62 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46560 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-12-04mb/amd/mandolin: mandolin: Fix typo in *Coprocessor* in commentPaul Menzel
This reduces the difference with Cereme’s devicetree file. Change-Id: I1e6ba5891245562d5132307eab224623031e11c8 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46559 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-12-04mb/amd/mandolin: use more readable size formats in FMAP filesFelix Held
Since the FMD file isn't parsed any more by a shell script in the SoC's Makefile.inc, we can use better human-readable numbers for the section sizes. TEST=Timeless build results in identical image. Change-Id: I2117064a694f67767284f6fd4ac3604b254a2734 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48245 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-12-04mb/amd/mandolin: removed unused MANDOLIN_MICROCHIP_FW_OFFSETFelix Held
TEST=Timeless build results in identical image. Change-Id: Ifa5c14add555b382f74ba1165131b1569bbef123 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48243 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-12-04mb/emulation/x86: Add optional parallel_mp init supportArthur Heymans
This makes it possible to select both the legacy LAPIC AP init or the newer parallel MP init. Tested on i440fx with -smp 32. Change-Id: I007b052ccd3c34648cd172344d55768232acfd88 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48210 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-12-04cpu/qemu-x86: Increase MAX_CPUS to have actual AP initArthur Heymans
CONFIG_MAX_CPUS=4 is the maximum supported with SMM_ASEG. TESTED: on q35 and i440fx -smp 4/32. Change-Id: I696856870e34e7a7ad580bc83c6b38f1dfb4511d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48209 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-12-04cpu/x86/lapic/secondary.S: Adapt for x86_64Arthur Heymans
Adapt the old lapic init code for x86_64. Change-Id: I5128ed574323025e927137870fb10b23d06bc01d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48221 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-12-04cpu/qemu-x86: Add the option to have no SMMArthur Heymans
Qemu i440fx does not support an smihandler at the moment. Change-Id: I5526b19b8294042a49e5bca61036e47db01fd28a Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48208 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-12-04drivers/intel/fsp2_0: FSP-T requires NO_CBFS_MCACHEArthur Heymans
When FSP-T is used, the first thing done in postcar is to call FSP-M to tear down CAR. This is done before cbmem is initialized, which means CBFS_MCACHE is not accessible, which results in FSP-M not being found, failing the boot. TESTED: ocp/deltalake boots again. Change-Id: Icb41b802c636d42b0ebeb3e3850551813accda91 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48282 Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-04src/soc/intel/alderlake: Enable the PCH HDAV Sowmya
This patch enables the PCH HDA device based on the devicetree configuration. Change-Id: I1791b769f4ab41cf89d82cf59049a2980c6c1eb0 Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48272 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-04mb/supermicro/x11ssm-f: correct trigger for SMI/NMI interrupt inputsMichael Niewöhner
All four SMI/NMI interrupt inputs have an external pull-up resistor and get triggered by pulling the line low. Thus, correct the trigger to active-low. Also document the signals by adding appropriate comments. The pads' connections have been determined by dissecting a dead board. Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: Id1a8c1e0b9fe723a15d04a88d565a53eeba9b085 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48093 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-04mb/supermicro/x11ssm-f: drop NMI overridesMichael Niewöhner
Drop the NMI overrides, since NMI now gets configured in gpio common code. Also remove the variant init mechanism, which is unused now. Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: I02e0c679f9aafe33108320a8dfc62dcb278202ef Reviewed-on: https://review.coreboot.org/c/coreboot/+/48092 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-04soc/intel/{skl,cnl}: add NMI_{EN,STS} registersMichael Niewöhner
Add NMI_EN and NMI_STS registers, so they can be configured for using NMI gpios. References: - CMP-LP: Intel doc# 615146-1.2 - CMP-H: Intel doc# 620855-002 - SPT-H: Intel doc# 332691-003 - SPT-LP: Intel doc# 334659-005 - CNP-H: Intel doc# 337868-002 Test: trigger NMI via gpio on Supermicro X11SSM-F did not work before but now makes the Linux kernel complain about a NMI. Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: I4d57ae89423bdaacf84f0bb0282bbb1c9df94598 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48091 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-04soc/intel/common/block/gpio: add code for NMI enablingMichael Niewöhner
Especially server boards, like the Supermicro X11SSM-F, often have a NMI button and NMI functionality that can be triggered via IPMI. The purpose of this is to cause the OS to create a system crashdump from a hang system or for debugging. Add code for enabling NMI interrupts on GPIOs configured with PAD_CFG_GPI_NMI. The enabling mechanism is the same as SMI, so the SMI function was copied and adapted. The `pad_community` struct gained two variables for the registers. Also register the NMI for LINT1 in the MADT in accordance to ACPI spec. Test: Linux detects the NMI correctly in dmesg: [ 0.053734] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: I4fc1a35c99c6a28b20e08a80b97bb4b8624935c9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48090 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-04intel/common/block/gpio: only reset configured SMI instead of allMichael Niewöhner
Currently, when a SMI GPIO gets configured, the whole status register is get written back and thus, all SMIs get reset. Do it right and reset only the correspondig status bit of the GPIO to be configured. Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: Iecf789d3009011381835959cb1c166f703f1c0cc Reviewed-on: https://review.coreboot.org/c/coreboot/+/48089 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-03mb/google/zork: Set S0IX_SLP_L high in S0, low in S3Martin Roth
This is used as a signal to show the system state. It hadn't been used up to this point as we're not currently using S0i3, but the fingerprint sensor will use it to go into a low power mode, so set it appropriately on Trembyle. Dalboz devices don't use the FPMCU, but set there as well so that the state matches. BUG=b:174695987 TEST=Verify GPIO state in S0 and S3 with the EC BRANCH=Zork Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: Ibc725905909830d44f77c2498a26edf6d7a3dc05 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48255 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Vincent Palatin <vpalatin@google.com> Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-03spi/flashconsole: Fix internal buffer overflowNico Huber
Once the console's FMAP region is full, we stop clearing the line buffer and `line_offset` is not reset anymore. Hence, sanity check `line_offset` everytime before writing to the buffer. The issue resulted in boot hangs and potentially a brick if the log was very verbose. Change-Id: I36e9037d7baf8c1ed8b2d0c120bfffa58c089c95 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48074 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-03mb/hp/z220_sff_workstation/Kconfig: Select MAINBOARD_USES_IFD_GBE_REGIONAo Zhong
Select MAINBOARD_USES_IFD_GBE_REGION to make CONFIG_HAVE_GBE_BIN (Add gigabit ethernet configuration) selection available. Without that onboard Ethernet won't work. Signed-off-by: Ao Zhong <hacc1225@gmail.com> Change-Id: I9fe138363fc47254285ebaa4a7dbe5b94a0a8784 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48007 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-03soc/intel/skylake: Add chipset devicetreeFelix Singer
Set most of the devices to off to keep current behaviour. Change-Id: Ic4dbd965c84c3679e42a181dea0e7e618c12fb97 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46314 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-12-03cbfs: mcache: Fix end-of-cache checkJulius Werner
After the mcache is copied into CBMEM, it has *just* the right size to fit the final tag with no room to spare. That means the test to check if we walked over the end must be `current + sizeof(tag) <= end`, not `current + sizeof(tag) < end`. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I25a0d774fb3294bb4d15f31f432940bfccc84af0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48277 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-12-03cbfs: Add verification for RO CBFS metadata hashJulius Werner
This patch adds the first stage of the new CONFIG_CBFS_VERIFICATION feature. It's not useful to end-users in this stage so it cannot be selected in menuconfig (and should not be used other than for development) yet. With this patch coreboot can verify the metadata hash of the RO CBFS when it starts booting, but it does not verify individual files yet. Likewise, verifying RW CBFSes with vboot is not yet supported. Verification is bootstrapped from a "metadata hash anchor" structure that is embedded in the bootblock code and marked by a unique magic number. This anchor contains both the CBFS metadata hash and a separate hash for the FMAP which is required to find the primary CBFS. Both are verified on first use in the bootblock (and halt the system on failure). The CONFIG_TOCTOU_SAFETY option is also added for illustrative purposes to show some paths that need to be different when full protection against TOCTOU (time-of-check vs. time-of-use) attacks is desired. For normal verification it is sufficient to check the FMAP and the CBFS metadata hash only once in the bootblock -- for TOCTOU verification we do the same, but we need to be extra careful that we do not re-read the FMAP or any CBFS metadata in later stages. This is mostly achieved by depending on the CBFS metadata cache and FMAP cache features, but we allow for one edge case in case the RW CBFS metadata cache overflows (which may happen during an RW update and could otherwise no longer be fixed because mcache size is defined by RO code). This code is added to demonstrate design intent but won't really matter until RW CBFS verification can be supported. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I8930434de55eb938b042fdada9aa90218c0b5a34 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41120 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-12-03x86: Put bootblock startup code into .text._start sectionJulius Werner
The initial bootblock assembly code on x86 is just put into the .text section, which just happens to come before all the individual .text.* function sections in the program.ld script. So it tends to be at the start of the image, but if you inserted another linker script section with contents before .text, it would cause a problem. (I'm not sure if it's an architectural requirement for _start16bit to come at the start of the image, but at least its 4K alignment requirement would waste a lot of space if it didn't.) This patch moves the section to .text._start which is the name other architectures use for the code they want in the very front of the image and which is listed first in program.ld. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: Ia84e6e33ec29584d356e226e8fdcb8c9334d49af Reviewed-on: https://review.coreboot.org/c/coreboot/+/46834 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-03src: Remove redundant use of ACPI offset(0)Elyes HAOUAS
IASL version 20180927 and greater, detects Unnecessary/redundant uses of the Offset() operator within a Field Unit list. It then sends a remark "^ Unnecessary/redundant use of Offset" example: OperationRegion (OPR1, SystemMemory, 0x100, 0x100) Field (OPR1) { Offset (0), // Never needed FLD1, 32, Offset (4), // Redundant, offset is already 4 (bytes) FLD2, 8, Offset (64), // OK use of Offset. FLD3, 16, } We will have those remarks: dsdt.asl 14: Offset (0), Remark 2158 - ^ Unnecessary/redundant use of Offset operator dsdt.asl 16: Offset (4), Remark 2158 - ^ Unnecessary/redundant use of Offset operator Change-Id: I260a79ef77025b4befbccc21f5999f89d90c1154 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43283 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-03cbfstool: Use cbfs_serialized.h and standard vboot helpersJulius Werner
This patch reduces some code duplication in cbfstool by switching it to use the CBFS data structure definitions in commonlib rather than its own private copy. In addition, replace a few custom helpers related to hash algorithms with the official vboot APIs of the same purpose. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I22eae1bcd76d85fff17749617cfe4f1de55603f4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41117 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
2020-12-03cbfs: Introduce cbfs_ro_map() and cbfs_ro_load()Julius Werner
This patch introduces two new CBFS API functions which are equivalent to cbfs_map() and cbfs_load(), respectively, with the difference that they always operate on the read-only CBFS region ("COREBOOT" FMAP section). Use it to replace some of the simple cases that needed to use cbfs_locate_file_in_region(). Change-Id: I9c55b022b6502a333a9805ab0e4891dd7b97ef7f Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39306 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-02lib/trace: Remove TRACE supportKyösti Mälkki
Looks like the option is generally not compatible with garbage collections. Nothing gets inlined, for example is_smp_boot() no longer evaluates to constant false and thus the symbols from secondary.S would need to be present for the build to pass even if we set SMP=n. Also the addresses of relocatable ramstage are currently not normalised on the logs, so util/genprof would be unable dress those. Change-Id: I0b6f310e15e6f4992cd054d288903fea8390e5cf Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45757 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-12-02mb/google/brya: Add GPIO stubsEric Lai
Add stubbed out GPIO configuration and perform GPIO initialization during bootblock and ramstage. BUG=b:174266035 TEST=Build Test Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Ia658ab4b466242cf8658abb239f19a9c0a03849a Reviewed-on: https://review.coreboot.org/c/coreboot/+/48065 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-12-02mb/google/brya: Add entry stubs of each stageEric Lai
Add entry point stubs of each stage for Brya. More functionalities will be added later. BUG=b:174266035 TEST=Build Test Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I44934c05ee32090b6e34648ee02f004c83e93d57 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48063 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-02mb/google/brya: Add flashmap descriptorEric Lai
BUG=b:174266035 TEST=Build Test Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Ia1ba8c997680c60ee1eabfae82459e127f664117 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48062 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-02drivers/i2c/nct7802y: Move the sensor initialization procedureMaxim Polyakov
The current location for the sensor initialization procedure was chosen by mistake. Move this into a separate function in nct7802y.c . Change-Id: I093ae75db5f0051bff65375b0720c86642b9148a Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47861 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-12-02cbfs: Port cbfs_load() and cbfs_map() to new APIJulius Werner
This patch adapts cbfs_load() and cbfs_map() to use the new CBFS API directly, rather than through cbfs_boot_locate(). For cbfs_load() this means that attribute metadata does not need to be read twice. Change-Id: I754cc34b1c1471129e15475aa0f1891e02439a02 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39305 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-12-02cbfs: Simplify load/map API names, remove type argumentsJulius Werner
This patch renames cbfs_boot_map_with_leak() and cbfs_boot_load_file() to cbfs_map() and cbfs_load() respectively. This is supposed to be the start of a new, better organized CBFS API where the most common operations have the most simple and straight-forward names. Less commonly used variants of these operations (e.g. cbfs_ro_load() or cbfs_region_load()) can be introduced later. It seems unnecessary to keep carrying around "boot" in the names of most CBFS APIs if the vast majority of accesses go to the boot CBFS (instead, more unusual operations should have longer names that describe how they diverge from the common ones). cbfs_map() is paired with a new cbfs_unmap() to allow callers to cleanly reap mappings when desired. A few new cbfs_unmap() calls are added to generic code where it makes sense, but it seems unnecessary to introduce this everywhere in platform or architecture specific code where the boot medium is known to be memory-mapped anyway. In fact, even for non-memory-mapped platforms, sometimes leaking a mapping to the CBFS cache is a much cleaner solution than jumping through hoops to provide some other storage for some long-lived file object, and it shouldn't be outright forbidden when it makes sense. Additionally, remove the type arguments from these function signatures. The goal is to eventually remove type arguments for lookup from the whole CBFS API. Filenames already uniquely identify CBFS files. The type field is just informational, and there should be APIs to allow callers to check it when desired, but it's not clear what we gain from forcing this as a parameter into every single CBFS access when the vast majority of the time it provides no additional value and is just clutter. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: Ib24325400815a9c3d25f66c61829a24a239bb88e Reviewed-on: https://review.coreboot.org/c/coreboot/+/39304 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Mariusz Szafrański <mariuszx.szafranski@intel.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 21:30:07 +0000