summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2019-01-23mb/intel/glkrvp: Fix termination for dual voltage pinsShamile Khan
These pins should not have pull downs configured in standby state as that can cause contention on the termination circuitry and lead to incorrect behavior as per Doc# 572688 Gemini Lake Processor GPIO Termination Configuration. BUG=b:79982669 TEST=Checked that code compiles with changes. Change-Id: I8156c67df152555ecf9e7be9e4851468538bcff1 Signed-off-by: Shamile Khan <shamile.khan@intel.com> Reviewed-on: https://review.coreboot.org/c/30867 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: John Zhao <john.zhao@intel.corp-partner.google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-01-23google/kukui: Revise FMAP layout for larger CBFSHung-Te Lin
Kukui with vboot enabled will build with `detachable_ui`, which needs larger space in CBFS for more complicated assets. So we need to revise FMAP sections: - BOOTBLOCK (not really used) only needs <= 32K. - GBB can be much smaller since assets moved from GBB to CBFS. - FMAP is re-ordered (with the cost of less efficient in bsearch) so CBFS can get larger continuous space. - COREBOOT(CBFS) should take all space left. Since FMAP and COREBOOT have changed location, the system will need to reflash EC (which contains the new bootblock) as well. BUG=b:123202015 TEST=Builds and boots on Kukui P1 Change-Id: I22cff99dca8c396c5897c3f6631721af40f3ffbd Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/31035 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: You-Cheng Syu <youcheng@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-01-23mb/google/poppy/variant/nami: disable unused usb2 portsRen Kuo
disable unused usb2 ports of bard and ekko skus BUG=120874946 TEST=build a test firmware and run lsusb to check usb ports Change-Id: I2ef3cd17ada8b65c96bc80675650905949f235e1 Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/30986 Reviewed-by: Vincent Wang <vwang@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-23mb/google/arcada: Add settings for noise mitgationCasper Chang
Enable acoustic noise mitgation for arcada platform, the slow slew rates are fast time dived by 2. BUG=none BRANCH=none TEST=none Signed-off-by: Casper Chang <casper_chang@wistron.corp-partner.google.com> Change-Id: Ia838818a76a7f638b24146f3eb48493a4091c9cb Reviewed-on: https://review.coreboot.org/c/coreboot/+/31034 Reviewed-on: https://review.coreboot.org/c/31034 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-01-23mb/lenovo/x131e: add VBTJames Ye
VBT was extracted from VBIOS ROM. Tested with libgfxinit, booting SeaBIOS into Linux. Change-Id: Ibedb43852dc9b846850e1070b84f708c847b7dbf Signed-off-by: James Ye <jye836@gmail.com> Reviewed-on: https://review.coreboot.org/c/31003 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-23nb/intel/pineview: Use parallel MP initArthur Heymans
Remove guards around CPU code on which all platforms use parallel MP init code. This removes the option to disable HT siblings. Tested on Foxconn D41S. Change-Id: I89f7d514d75fe933c3a8858da37004419189674b Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/25602 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-23nb/intel/x4x: Use parallel MP initArthur Heymans
Use parallel MP init code to initialize all AP's. Also remove guards around CPU code where all platforms now use parallel MP init. This also removes the code required on lapic init path for model_6fx, model_1017x and model_f4x as all platforms now use the parallel MP code. Tested on Intel DG41WV, shaves off about 90ms on a quad core. Change-Id: Id5a2729f5bf6b525abad577e63d7953ae6640921 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/25601 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-23nb/intel/i945: Use parallel MP initArthur Heymans
Use the parallel mp init path to initialize AP's. This should result in a moderate speedup. Tested on Intel D945GCLF (1 core 2 threads), still boots fine and is 26ms faster compared to lapic_cpu_init. This removes the option to disable HT siblings. Change-Id: I955551b99e9cbc397f99c2a6bd355c6070390bcb Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/25600 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-01-23nb/intel/gm45: Use parallel MP initArthur Heymans
This places the parallel mp ops up in the model_1067x dir and is included from other Intel core2 CPU dirs that can use the same code. Tested on Thinkpad X200 on which boot time is reduced by ~35ms. Change-Id: Iac416f671407246ee223075eee1aff511e612889 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/23434 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-23mediatek/mt8183: Add Micron 4GB LPDDR4X DDR supportHuayang Duan
BUG=b:80501386 BRANCH=none TEST=Boots correctly and stress test pass on Kukui. Change-Id: I985c5061ce4ed4d88a17619aa5cde7d0121dd3a3 Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/c/31033 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-01-23soc/intel/baytrail/romstage: Remove unneeded white spaceElyes HAOUAS
Change-Id: I6725d1130a40d3c458a3cd5a116d6e91354ec41b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/30953 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-23src/drivers: Remove needless '&' on function pointersElyes HAOUAS
Change-Id: I7a99d0dcbc8ea1362a12a68fa519c49058d30a05 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/29868 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-01-23soc/{amd,intel}: Remove needless '&' on function pointersElyes HAOUAS
Change-Id: I7a59fd2f370d2b0d830ca83be9a9bc1abe2750f5 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/29862 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Alex Thiessen <alex.thiessen.de+coreboot@gmail.com>
2019-01-23mb/purism/librem_skl: add 13v3 variantMatt DeVillier
The 13v3 is just a 13v2 with TPM added, so duplicate 13v2 config and change strings where needed. Leave MAINBOARD_PART_NUMBER unchanged since boards were initially shipped with 13v2 firmware, and changing it now would cause flashrom to throw a board mismatch error. Change-Id: I1a5e4c84cc9444bb9731b6dcc4de2ce7427dbbb1 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/31010 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-23mb/purism/librem_skl: add support for 13v4/15v4 boardsMatt DeVillier
Add support for Kabylake Librem 13v4/15v4 boards, reusing existing 13v2/15v3 variants since board design unchanged (only SoC). Adjust identification strings, add Kabylake VGA PCI ID. Change-Id: Ia795b9c7373ea2e2acd3bef309320b58e9e8449d Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/31009 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-23mb/purism/librem_skl: adjust CBFS_SIZEMatt DeVillier
Adjust default CBFS_SIZE to match that used in configs for building Change-Id: Ibe1312560a923dcdefb8af52a721ab76c0b08a2e Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/31008 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-23mb/google/poppy/variants/nami: close the FP power in S5Ren Kuo
close the FP module power in power off (s5) BUG=122887366 BRANCH=Nami TEST= build test firmware and measure the fp power enable pin Change-Id: I80ddfbf1edf7c6435d263d5f5e0edb8b8701817d Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/30910 Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Vincent Wang <vwang@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-23mb/google/hatch: Enable SD card support for hatchMaulik V Vaghela
Enable support for SD card support for hatch 1. Enable PCI device for SD and also configure SD detect GPIO 2. Configure SD card related GPIOs in gpio.c BUG=b:120914069 BRANCH=none TEST=Verify GPIO configuration with schematics Change-Id: I8ccaa28323b1e1fcc192e245347a96309227660b Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/30545 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2019-01-23arch/x86: Align _start16bit with C_ENVIRONMENT_BOOBLOCKKyösti Mälkki
Followup removes SIPI_VECTOR_IN_ROM and it seems reasonable enough to force the alignment unconditionally to page size. Reason for the conditionals is the alignment is not possible with romcc bootblocks having total size less than 4 kiB. Change-Id: I0ff2786f80a319ebb3215d4fd696cda3e15c3012 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30855 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-23Drop leftover debug function declarationsKyösti Mälkki
Change-Id: Ib93b816e7ab3146f6f70ad4089327cd6b7bc7c24 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30893 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: David Guckian Reviewed-by: Vanny E <vanessa.f.eusebio@intel.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-01-23mb/google/octopus: Override emmc DLL values for MeepKane Chen
New emmc DLL values for Meep. BUG=b:122308271 TEST=Boot to OS on 13 Meep system Change-Id: I4247114ed69ff3aa283f0f72d5531ad0f37309ad Signed-off-by: Kane Chen <kane.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/31021 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-22mb/asus/kgpe-d16: Add BMC KCS to ACPITimothy Pearson
The BMC KCS interface must be advertised to the host OS in order for automatic load of the ipmi module to work. Expose the KCS interface via ACPI. Change-Id: Ia251334ae44668c2260d8d2e816f85f1f62faac7 Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com> Reviewed-on: https://review.coreboot.org/c/19822 Reviewed-by: Piotr Kubaj <pkubaj@anongoth.pl> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-22mb/asus/kgpe-d16: Enable IPMI KCS accessTimothy Pearson
The on-board BMC contains a hardware KCS interface. Allow access to it over LPC. Change-Id: Ia251334ae44668c2260d8d2e816f85f1f62faac6 Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com> Reviewed-on: https://review.coreboot.org/c/19821 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-22Revert "UPSTREAM: mainboard/google/kahlee: Also configure GPIO_9 in RAM stage"Daniel Kurtz
This reverts commit 3278f859c3dd97a6d6d885a91dfd33d44e95d58b. Reason for revert: It turns out all we want to set in RAM stage is GPIO's DEBOUNCE config, not its SCI configuration. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> BUG=b:113880780 BRANCH=none TEST=Boot grunt, does not go to recovery screen Change-Id: I500934f3e03e66c97873accd4a979a23d4509675 Reviewed-on: https://review.coreboot.org/c/30997 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2019-01-22AGESA/binaryPI: Add NULL pointers checkKyösti Mälkki
Fix regression after commits 4ad7f5b AGESA: Use pcidev_on_root() 33ff44c binaryPI: Use pcidev_on_root() Previously used call dev_find_slot() returned pointers to PCI device nodes that were actually not present in the hardware at all. Register reads would come back with invalid (0xff) values and writes would be ignored. After change to pcidev_on_root(), attempting to do register operations with non-present PCI hardware immediately halts with error get_pbus: dev is NULL! Change-Id: I785350c171a642207c5fab884a953d45a3bfe592 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/31026 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-22cpu/intel/model_206ax: Use parallel MP initArthur Heymans
This patch adds a few southbridge calls needed for parallel MP init. Moves the smm_relocate() function to smm/gen1/smi.h, since that is where this function is defined now. Tested on Thinkpad X220, shaves off ~30ms on a 2 core, 4 threads CPU. Change-Id: Ia1d547ed4a3cb6746a0222c3e54e94e5848b0dd7 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/25618 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-22cpu/intel/smm/gen1: Add pineview to the check for alt SMRR MSR'sArthur Heymans
Intel pineview has the same alternative SMRR MSR and IA32_FEATURE_CONTROL enable bit as core2 CPUs so properly check for that before enabling this feature. This also exposes a function to fetch whether alternative SMRR MSR's ought to be used. Change-Id: Iccaabfa95b8dc4366b8e7e2c2a526081d4af0efa Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30868 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-22mb/google/hatch: Remove MAINBOARD_USES_IFD_EC_REGION selectionSubrata Banik
hatch shouldn't make use of internal ec.bin through IFD tool. Change-Id: Ib1a324291b1c8ac90a7d790b63427b2e85c74fd1 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/31022 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2019-01-21Revert "soc/amd/stoneyridge/gpio: Configure debounce for irq gpios"Raul Rangel
This reverts commit b82afce18aff24b6e5e3b73a67a6533cc4865a26. Reason for revert: This causes depthcharge to not boot due to TPM timeout errors. Because there is no wait after setting the debounce register, we lose data because the read-modify-write loses the interrupt status bit. e.g., GPIO 5 sets debounce, without a wait. Then GPIO 9 has it's debounce set. Because the interrupt controller is masking the interrupt enable status bit, the read-modify-write for GPIO9 loses the interrupt enable status bit and it never gets set again. This causes the interrupt to never latch. We should possibly make depthcharge set the interrupt enable status bit for latched GPIOs. Change-Id: Idd7259b14b24c441529d64e173be9faec03f4fc8 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/c/30981 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Daniel Kurtz <djkurtz@google.com>
2019-01-21lib/boot_device: Add API for write protect a regionRizwan Qureshi
Add API that should be implemented by the boot media drivers for write-protecting a subregion. Change-Id: I4c9376e2c2c7a4852f13c65824c6cd64a1c6ac0a Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/c/28724 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-01-21drivers/spi: Add controller protection typeRizwan Qureshi
Some SPI controllers support both READ and WRITE protection add a variable to the protect API for the callers to specify the kind of protection they want (Read/Write/Both). Also, update the callers and protect API implementation. BUG=None BRANCH=None TEST=test that the mrc cache is protected as expected on soraka. Also tried if the read protection is applied correctly. Change-Id: I093884c4768b08a378f21242ac82e430ac013d15 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/c/30559 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-01-20mb/google/octopus/variants: Disable xHCI compliance mode for FleexAmanda Huang
Some usb devices exhibits signal loss which causes xHCI entering compliance mode. The resolution is to disable xHCI compliance mode. BRANCH=octopus BUG=b:120009029 TEST=Verified usb operation successfully. Change-Id: Ic7fa08c894397598dee3c4ff9a764e43383a0627 Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/30984 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2019-01-20mb/google/octopus/variants/meep: Disable xHCI compliance modeWisley Chen
Some usb devices exhibit signal loss which causes xHCI entering compliance mode. The resolution is to disable xHCI compliance mode. BUG=b:122671995 TEST=check "Disable Link Compliance Mode" bit of "SuperSpeed Port Link control" register and usb operation successfully. Change-Id: Ia2ae7e52391fadc8ed23b8b76c45d410757d22ec Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/30948 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-20src/soc/intel/braswell: Use DEVICE_NOOPElyes HAOUAS
Use already defined DEVICE_NOOP instead. Change-Id: Ie6182f273cba3073c84a502c34a002dee6122c2f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/29857 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-18soc/intel/denverton_ns: Select CPU_INTEL_FIRMWARE_INTERFACE_TABLEVanessa Eusebio
* Add CPU_INTEL_FIRMWARE_INTERFACE_TABLE Change-Id: I9d4901ea56d5bf5225a8f3a6015d2ea80a9e46b5 Signed-off-by: Vanessa Eusebio <vanessa.f.eusebio@intel.com> Reviewed-on: https://review.coreboot.org/c/26928 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: David Guckian Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-18mb/google/sarien/variants: Add Thermal Sensors informationSumeet Pawnikar
Add available thermal sensors information for CPU throttling action. BRANCH=None BUG=b:120058043 TEST=Built and tested on Arcada system Change-Id: I748ca0ce43915c96d71e63fb03fc3d1a02adc56c Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/30919 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-01-18drivers/spi/winbond.c: Add the rest of >=1MB Winbond W25 chipsMike Banon
Required for ACPI S3 suspend support at some motherboards. Synchronizing with flashchips.c/h flashrom source code. Signed-off-by: Mike Banon <mikebdp2@gmail.com> Change-Id: I4d15d5acf0e2044e5128ce809c282fbcb35f24f0 Reviewed-on: https://review.coreboot.org/c/30746 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2019-01-18mb/google/sarien/variants/sarien: Adjust TP/TS/H1 I2C CLK to meet specDtrain Hsu
After adjustment on Sarien EVT TouchScreen: 380.7 KHz TouchPad: 379.3 KHz H1: 392.2 KHz BUG=b:122657195 BRANCH=master TEST=emerge-sarien coreboot chromeos-bootimage measure by scope Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: I0dd92b054d934b38a17898dc8ce9cc18bda1633f Reviewed-on: https://review.coreboot.org/c/30949 Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-17mb/lenovo/x220: Add x1 as a variantBill XIE
ThinkPad X1 ( https://www.thinkwiki.org/wiki/Category:X1 ) is nearly a clone of X220, with additional USB3 controller on pci-e (as i7 variant of x220), and a powered ESATA port wired to ata4 (Linux' annotation). Documentation added. Tested: - CPU i5-2520M - Slotted DIMM 8GiB - Camera - Mini pci-e on wlan slot - Msata on wwan slot - On board SDHCI connected to pci-e - USB3 controller connected to pci-e - NVRAM options for North and South bridges - S3 - TPM1 on LPC - Linux 4.9.110-3 within Debian GNU/Linux stable, loaded from SeaBIOS, or Linux payload (Heads) Not tested: - Fingerprint reader on USB2 - Onboard USB2 interfaces (wlan slot, wwan slot) Change-Id: Ibbc45f22c63b77ac95c188db825d0d7e2b03d2d1 Signed-off-by: Bill XIE <persmule@gmail.com> Reviewed-on: https://review.coreboot.org/c/29434 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-01-17mb/kontron/986lcd-m: Implement disabling ethernet NIC in ramstageArthur Heymans
With the i82801gx code automatically disabling devices ethernet NICs attached to the southbridge PCIe ports can now be disabled during the ramstage. Change-Id: If4163f8101d37cc09c0b51b1be20bf8388ed2b89 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30245 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-17sb/intel/i82801gx: Implement PCIe coalescingArthur Heymans
The implementation is a simplified version of the haswell/broadwell code. This also adds a chip option to enable coalescing from the devicetree. Change-Id: I6d7ddef96e4f45e163f7017175398a0938a18273 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30320 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-01-17vendorcode/{amd,cavium,intel}: Remove trailing whitespacePeter Lemenkov
find src -type f "!" -regex ".*\.\(vbt\|bin\)" -exec sed -i -e "s,\s\+$,,g" {} \; Change-Id: Ic70cf8524dcd0a0f5700f91b704b3c545dd8a01a Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/30959 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-17superio/nsc: fix IO masksFelix Held
The IO mask shouldn't contain zeros inside the block of ones. Change-Id: Icfebbf1d1d88ceef58800339bf899931fdc61ab7 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/30954 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-01-17soc/intel/cannonlake: drop extra newlinePatrick Georgi
Change-Id: I614ea7f0f74326e306649779266001cf25ce5e07 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/30955 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2019-01-17cpu/intel/car: Remove unneeded white spaceElyes HAOUAS
Change-Id: Ib711560838ee0b5cd317ec573e97c4004751d3ff Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/30952 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-17console/init: Print log level in coreboot bannerPaul Menzel
Sometimes, it’s not clear, what log level is configured (in Kconfig and CMOS), so print the log level in the banner. coreboot-4.9-354-gff6e99cebe Tue Jan 15 15:23:20 UTC 2019 bootblock starting (log level: 7)... Change-Id: I82c87ae90cd53fd47458fc6df3ef2c7f238f0f3d Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/30935 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-01-17tss/tcg-2.0: remove unnecessary break from marshaling codeJoel Kitching
BUG=None TEST=None Change-Id: I054e0799469bf39499666342a5c639b1f766cd85 Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/c/29652 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-17lib/libgcc.c: Fix shift warningsPaul Menzel
``` if (!(a & (0xffff << 16))) { ^~ src/lib/libgcc.c:40:18: error: result of '255 << 24' requires 33 bits to represent, but 'int' only has 32 bits [-Werror=shift-overflow=] if (!(a & (0xff << 24))) { ^~ src/lib/libgcc.c:45:17: error: result of '15 << 28' requires 33 bits to represent, but 'int' only has 32 bits [-Werror=shift-overflow=] if (!(a & (0xf << 28))) { ^~ ``` Change-Id: I7bdd75c20a76b303743d7e7e0d3a6503760284fd Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/23361 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-01-17mb/google/hatch: Configure miscellaneous featuresRonak Kanabar
set SaGv = SaGv_Enabled , To Enable System Agent dynamic frequency support set HeciEnabled = 1, To Enable heci communication set speed_shift_enable = 1 To Enable Speed Shift Technology support Change-Id: Iea90a65a77ef5e45a802cfe6fd31e1921163b02b Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/30774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2019-01-17soc/intel/cannonlake: Change in SaGv optionsRonak Kanabar
CNL,WHL and CFL all are not using midfixed option in SaGv so keeping it for CNL only and removing it for others. Change-Id: I754515c2f8e249479c603872c61ac9a006e962ff Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/30917 Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-17soc/intel/icelake: Fix AG3E programming in PMCLijian Zhao
According to EDS #571034 4.3.2, GEN_PMCON_A stays in pmc mmio mapped register but not pci configuration spaces, hence change the programming method in icelake pmc driver. Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Change-Id: I29883b50cdca99b45f5362f78cbee32beaa669f7 Reviewed-on: https://review.coreboot.org/c/30947 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2019-01-17src/mainboard/google/sarien: query recovery mode from Cr50Keith Short
On the Sarien/Arcada platforms, the EC is not trusted to provide the state of the ESC+REFRESH+PWR recovery combination. On these platforms the Cr50 latches the state of REFRESH+PWR for use as the recovery mode key combination. BUG=b:122715254 BRANCH=none TEST=Verify recovery mode screen shown after pressing REFRESH+PWR Change-Id: If336e9d7016987be151ab30d5c037ead3a998fe0 Signed-off-by: Keith Short <keithshort@chromium.org> Reviewed-on: https://review.coreboot.org/c/30937 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-01-17src/security/tpm: query recovery mode from Cr50Keith Short
On the Sarien/Arcada platforms, the EC is not trusted to provide the state of the ESC+REFRESH+PWR recovery combination. On these platforms the Cr50 latches the state of REFRESH+PWR for use as the recovery mode key combination. BUG=b:122715254 BRANCH=none TEST=Verify recovery mode screen shown after pressing REFRESH+PWR Signed-off-by: Keith Short <keithshort@chromium.org> Change-Id: Ie3ce519956f916023c8c52f1d11fa93331f52f3c Reviewed-on: https://review.coreboot.org/c/30929 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2019-01-17soc/intel/fsp_broadwell_de: Enable FIT supportPatrick Rudolph
* Add CPU_INTEL_FIRMWARE_INTERFACE_TABLE Tested on wedge100s. Microcode is placed in FIT. Change-Id: Ie0003f597aa5f272847b4f8895a1e3571caa3464 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/30956 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-17soc/intel/fsp_broadwell_de: Fix TSEG size computationPatrick Rudolph
The address bits 19:0 of TSEG_LIMIT read as zero, but are ignored on comparison. The result is that the limit is effectively FFFFFh. Add one MiB to the register value to make TSEG 8MiB instead of 7MiB. Fixes a crash related to SMRR not matching the TSEG region. Change-Id: I1a625f7bb53a3e90d3cbc0ce16021892861367d8 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/30932 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-01-17hatch: Add sbmios_mainboard_sku functionShelley Chen
BUG=b:122578255 BRANCH=None TEST=mosys platform id/name/family Change-Id: I6288ea1a4e9f692b6e04440e61f59ea53f01ebec Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/30944 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-01-17hatch: disable sw syncShelley Chen
Disabling software sync since EC patches haven't landed yet. BUG=b:120914069 BRANCH=None TEST=build bios image and make sure gbb flag 0x200 is set Change-Id: I1661bcd6ebbee6d9aa8068efcc18b259fb4c8203 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/30943 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-01-17riscv: create Kconfig architecture features for new partsRonald G. Minnich
RISCV parts can be created with any one of four CPU modes enabled, with or without PMP, and with either 32 or 64 bit XLEN. In anticipation of parts to come, create the Kconfig variables for these architecture attributes. Change-Id: I32ee51b2a469c7684a2f1b477bdac040e972e253 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: https://review.coreboot.org/c/30348 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-16mb/google/sarien/variants/sarien: Set up tcc offset for sarienJohn Su
Change tcc offset from 15 to 3 for sarien. BUG=b:122636962 TEST=Match the result from TAT UI Change-Id: I1c5d144e92d1e6e9c81b3e6686805ccf744b7203 Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/30808 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-16soc/intel/cannonlake: Fix afterg3 programmingLijian Zhao
According to EDS #565870 chapter 5.3.1, AG3E bit in PMC located in PMC memory mapped register but not pci config spaces. Change the programming to affect that difference. BUG=b:122425492 TEST=Change System Power State after failure to "s5 off", and boot up onto sarien platform, check the register with iotools mmio_read32 0xfe001020 and bit 0 is set. Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Change-Id: I0934894558fd9cbc056dea8e7ac30426c2529e4e Reviewed-on: https://review.coreboot.org/c/30945 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-16mainboard/google/kahlee: Also configure GPIO_9 in RAM stageDaniel Kurtz
The general rule is to configure GPIOs used by coreboot in bootblock (using the reset table), and GPIOs used by OS in RAM stage. However, GPIO_9 will be used as both, and we need to reconfigure it to properly set up debounce, however, it is no longer possible to change bootblock, so we also configure it in RAM stage to make the new debounce configuration take affect. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> BUG=b:113880780 BRANCH=none TEST=Reboot stress test grunt (>100 times); no messages in dmesg like: tpm tpm0: Timeout waiting for TPM ready Change-Id: I0f1bca176ed3f9cebf6b9e9e1008905e492a2f03 Reviewed-on: https://review.coreboot.org/c/30922 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-01-16soc/amd/stoneyridge/gpio: Configure debounce for irq gpiosDaniel Kurtz
FT4 has a strange property where whenever the debounce registers for any one gpio are changed, the FT4 disables interrupt propagation for ALL gpio irqs for ~4ms. In other words, if an edge interrupt of one gpio happens exactly during this debounce-irq-off window immediately following the configuration of another gpio, the interrupt will be lost. It is quite difficult to deal with this in the kernel, since during kernel boot time, drivers & devices are probed asynchronously, meaning it may happen that an already loaded driver may miss an interrupt when some later driver is being probed and configuring its gpio interrupt. To eliminate this possibility, we pre-configure the debounce registers in ram stage for all gpios that will be used as irqs later by the kernel using the same configuration as used by the kernel, as per this table: IRQ Debounce Edge Remove Glitch Level High Preserve Low Glitch Level Low Preserve High Glitch Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> BUG=b:113880780 BRANCH=none TEST=Reboot stress test grunt (>100 times); no messages in dmesg like: tpm tpm0: Timeout waiting for TPM ready Change-Id: I94c7ecfb14e5bb209b3598e10287c80eb19da25b Reviewed-on: https://review.coreboot.org/c/30921 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-01-16soc/amd/stoneyridge/gpio: Remove redundant definitionsDaniel Kurtz
Thes are already defined identically ~20 lines above. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> BUG=none BRANCH=none TEST=compile Change-Id: Ic3faeb97788b2b524345cdbfb368e98d43bac075 Reviewed-on: https://review.coreboot.org/c/30920 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-01-16mb/google/kahlee/careena: Add 20ms delay to captureAkshu Agrawal
define wakeup-delay-ms to 20ms. This avoids the pop noise heard at the start of capture. BUG=b:119926436 TEST=with kernel patch https://lore.kernel.org/patchwork/patch/1029806/ no pop sound heard at start of capture Change-Id: I299a584ef2ba66d1e752515100cbe3919b2108f6 Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com> Reviewed-on: https://review.coreboot.org/c/30726 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-16mb/google/kahlee/liara: Add 20ms delay to captureAkshu Agrawal
define wakeup-delay-ms to 20ms. This avoids the pop noise heard at the start of capture. BUG=b:119926436 TEST=with kernel patch https://lore.kernel.org/patchwork/patch/1029806/ no pop sound heard at start of capture Change-Id: I2593afa69cfb955f6a2b695406855e0f31f28468 Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com> Reviewed-on: https://review.coreboot.org/c/30725 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-16drivers/generic/adau7002: Add wakeup-delay-ms propertyAkshu Agrawal
Passes out wakeup-delay to driver. This delay is applied at the start of capture to make sure dmics are ready before we start recording. This avoids pop noise at begining of capture. BUG=b:119926436 TEST= With kernel patch https://lore.kernel.org/patchwork/patch/1029806/ No pop sound heard at start of capture Change-Id: I32b18bf80fad5899ab4093a127dfd52d589bc365 Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com> Reviewed-on: https://review.coreboot.org/c/30724 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-01-16string.h: Add isprint()Nico Huber
Change-Id: If179687f0a15cf5b16723ad18d8eb86a2d5fa48d Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/29479 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-16mb/purism: Select NO_POST instead of overriding its dependenciesNico Huber
Declaring a Kconfig symbol ahead to override its default also always sets implicit dependencies. If the original symbol doesn't have any, Kconfig gets confused. Change-Id: Ie6d9ca96e4b6037eefd432dd386cb5e540deb0ed Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/30925 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-16nb/intel/sandybridge: Remove the C native graphic initArthur Heymans
Libgfxinit provides a better alternative to the native C init. While libgfxinit mandates an ada compiler, we want to encourage use of it since it is in much better shape and is actually maintained. This way libgfxinit also gets build-tested by Jenkins. Change-Id: Ic6678d3455f1116e7e67a67b465a79df020b2399 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/27532 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-16mainboard/intel: Update mainboard UART KconfigSubrata Banik
After a96e66a (soc/intel: Clean mess around UART_DEBUG) got merged, all mainboard using intel cannonlake,coffeelake, kabylake, skylake, icelake and whiskeylake get affected. Using INTEL_LPSS_UART_FOR_CONSOLE instead of UART_DEBUG and set default console for each platform. TEST=Intel client and IoT team has verified that LPSS uart is working fine on CNL, WHL and ICL RVPs. Change-Id: I0381a6616f03c74c98f837e3c008459fefd4818c Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/30913 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-16mb/google/sarien: Enable Camarillo DeviceLijian Zhao
Whiskeylake processor have an internal device called Camarillo dedicated for thermal management support, turn it on so processor thermal driver can be loaded. BUG=N/A TEST=Boot up and run lspci on Sarien board, Bus 0 Device 4 Funcion 0 can be seen. Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Change-Id: I937960fde2704cddb1fe0058ab622f4b5de401d7 Reviewed-on: https://review.coreboot.org/c/30858 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-01-16src/mainboard/pcengines/apu1: Enable LPC TPMMichał Żygowski
PC Engines apu1 has a 20 pin LPC header that allows connection of external TPM module. Add necessary Kconfig option and devicetree entry for TPM. Change-Id: Ic9f3d41c6e8346a12553386b9c00de6b8fd21abd Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/30354 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-16AGESA fam16kb boards: Clean up devicetreeKyösti Mälkki
Remove double nesting of chip northbridge/amd. There is requirement to keep SPD address map in the same chip block with device 0:18.2. Change-Id: Id3a161c54341d0c5c569ea6118ee6f890b7f62e6 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30735 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-16AGESA fam15tn boards: Clean up devicetreeKyösti Mälkki
Remove double nesting of chip northbridge/amd. There is requirement to keep SPD address map in the same chip block with device 0:18.2. Change-Id: I67fcb59a63046865f660e628a61c2944b0f89a74 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30734 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: mikeb mikeb <mikebdp2@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-16AGESA fam14 boards: Clean up devicetreeKyösti Mälkki
Remove double nesting of chip northbridge/amd. There is requirement to keep SPD address map in the same chip block with device 0:18.2. Change-Id: Ib212f24c3d697a009d2ca8e2c77220de4bfb7573 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30733 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-16soc/intel/skylake: Access conf pointer only if its not nullPratik Prajapati
conf pointer could be null, access it only if its not null. Foundby=klocwork BUG=N/A TEST=N/A Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Change-Id: I0611e15d52edd8e69e4234b8ac602f35efba4015 Reviewed-on: https://review.coreboot.org/c/30862 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-01-16soc/intel/cannonlake: Access conf pointer only if its not nullPratik Prajapati
conf pointer could be null, access it only if its not null. Foundby=klocwork BUG=N/A TEST=N/A Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Change-Id: I1b3d6f53d2bfd9845ad7def91c4e6ca92651d216 Reviewed-on: https://review.coreboot.org/c/30860 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-01-16soc/intel/cannonlake: Add processor power limits control supportSumeet Pawnikar
Add processor power limits control support to configure values. BRANCH=None BUG=b:122343940 TEST=Built and tested on Arcada system Change-Id: I5990dc05b51481a0074855914cef20cf07378cde Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/30907 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-01-16mb/google/sarien: Set PL1 and PL2 valuesSumeet Pawnikar
Set PL1 and PL2 values to 25W and 51W respectively for processor power limits control. BRANCH=None BUG=b:122343940 TEST=Built and tested on Arcada system Change-Id: I4098f334ed5cb6c4a6f35f1a7b12809f34c23fa3 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/30908 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-01-16mb/intel/kblrvp: Fix unsigned val casting of smaller sizePraveen hodagatta pranesh
Signed-off-by: Praveen hodagatta pranesh <praveenx.hodagatta.pranesh@intel.com> Change-Id: I519ed4b5b403622d6bb01ad0bdd04e01dedff7d8 Reviewed-on: https://review.coreboot.org/c/30794 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-01-16mb/intel/kblrvp: Add new Kaby lake RVP11 supportPraveen hodagatta pranesh
The RVP11 is a dual-channel DDR4 SO-DIMM on skylake H platform. This patch add following chages - Add overridetree.cb for RVP11 - Select skylake PCH-H chipset config for RVP11. - Add GPIO table as per board schematics. - Add audio verb table for RVP11. - Set the UserBd UPD to BOARD_TYPE_DESKTOP. BUG=None TEST= Build and flash, confirm boot into yocto OS on KBL RVP11 platform. verified PCI, USB, ethernet, SATA, display, audio and power functionalities. Signed-off-by: Praveen hodagatta pranesh <praveenx.hodagatta.pranesh@intel.com> Change-Id: Id86f56df06795601cc9d7830766e54396d218e00 Reviewed-on: https://review.coreboot.org/c/29809 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-16buildsystem: Promote rules.h to default includeKyösti Mälkki
Does not fix 3rdparty/, *.S or *.ld or yet. Change-Id: I66b48013dd89540b35ab219d2b64bc13f5f19cda Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/17656 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-01-16soc/samsung/exynos5420: Disable BOOTBLOCK_CONSOLENico Huber
Add a new Kconfig NO_BOOTBLOCK_CONSOLE to disable the BOOTBLOCK_CONSOLE option completely. The commit message of fbb11cf (ARM: Separate the early console (romstage) from the bootblock console.) states that it doesn't work before romstage on Exynos 5420. Change-Id: I9b56a52f2555b5233300f27031a9ef50e7ab7cea Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/30926 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-01-16siemens/mc_apl4: Change UART_FOR_CONSOLE indexMario Scheithauer
This mainboard uses SOC internal UART 1 instead of UART 2 like all other mc_apl1 mainboards. Change-Id: Ib986962ed068fee019ffcec0391d43d5ab178458 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/30933 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-16mb/google/sarien: Set Vref Config to 2Lijian Zhao
Accoding to desciption in FSP header, Vref Configuration will be set to 2 if VREF_CA to CH_A and VREF_DQ_B to CH_B. BUG=N/A TEST=Build and boot up on Arcada platform. Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Change-Id: I02e16e141b81d766a6060ca08283f432abd96647 Reviewed-on: https://review.coreboot.org/c/30280 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-16drivers/spi/stmicro.c: Add the rest of >=1MB STMicro M25/N25 chipsMike Banon
Required for ACPI S3 suspend support at some motherboards. Synchronizing with flashchips.c/h flashrom source code. Signed-off-by: Mike Banon <mikebdp2@gmail.com> Change-Id: I69809fb638f59f0b399f3a1615f5d8d2b2ddae45 Reviewed-on: https://review.coreboot.org/c/30928 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-01-16drivers/spi/sst.c: Add three remaining SST25*F080 chipsMike Banon
Required for ACPI S3 suspend support at some motherboards. Synchronizing with flashchips.c/h flashrom source code. Signed-off-by: Mike Banon <mikebdp2@gmail.com> Change-Id: Idc63665937ab1bfdf15c4054001daa288bfdd47b Reviewed-on: https://review.coreboot.org/c/30927 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-01-15mb/google/atlas: Enable camera module NVMChen, JasonX Z
Enable at24 EEPROM by adding ASL of nvm BUG=b:122583978 BRANCH=master TEST=Build and run for basic camera functions Change-Id: Ifc2060c2ceb7d1a8ef490f36f484deb425a37c95 Signed-off-by: Chen, JasonX Z <jasonx.z.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/30795 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2019-01-15mb/*/*: Use libgfxinit on sandy and ivy bridge boardsArthur Heymans
Change-Id: I41ad1ce06d9afcc99941affa232fa76ffa6631fb Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/27531 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-15cpu/intel/socket_FCBGA559: Use the non-evict cache as ram setupArthur Heymans
Pineview CPUs support a non-eviction mode that ought to be used during cache as ram setup. This assumes that all atoms that need to set a special register to enable L2 cache are socketed and hence uses a static Kconfig option to set that MSR on affected CPUs. Tested on Foxconn D41S, still boots. Change-Id: Iec943f5710314fb7a644d89dbd6d8c425f4ed735 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30863 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-15src/superio/smsc/smscsuperio/superio.c: Add SCH5504Angel Pons
Based on previous reverse-engineering done on "util/superiotool". TEST=NOT TESTED (yet) Change-Id: I6c433fa04c01ba6315bcdca699030dfce18a169a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/28971 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-15soc/intel/apl: Hook microcode updates upNico Huber
Only tested on APL. Change-Id: I53f680fc4342a9bd1cd0ba9d72e025995e25f7f2 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/29902 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-01-15mainboard/ocp/wedge100s: Fix uartPatrick Rudolph
* Route IO 0x6e/0x6f to LPC bus * Setup ITE8526 in early_mainboard_romstage_entry * Fix romstage serial console by disabling internal uart default setting * Unselect CONFIG_INTEGRATED_UART, as it doesn't use internal UARTs * Select CONFIG_DRIVERS_UART_8250IO, as it has a SuperIO serial * Configure UPDs related to serial Change-Id: I59cd83ed43dbf4ee26685e4a573de153291f7074 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/30827 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-01-15vendorcode/intel/fsp1_0/broadwell_de: Use FSP from 3rdparty/fspPatrick Rudolph
Default to FSP binary and headers shiped in 3rdparty/fsp. * Drop headers and code from vendorcode/intel/fsp1_0/broadwell_de * Select HAVE_FSP_BIN to build test the platform * Fetch FSP repo as submodule * Make FSP_HEADER_PATH known from FSP2.0 useable on FSP1.0 * Introduce FSP_SRC_PATH for FSP source file * Add sane defaults for FSP_FILE Tested on wedge100s. Change-Id: I46f201218d19cf34c43a04f57458f474d8c3340d Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/30742 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com>
2019-01-14[RFC]util/checklist: Remove this functionalityArthur Heymans
It was only hooked up for galileo board when using the obsolete FSP1.1. I don't see how it can be useful... Change-Id: Ifd7cbd664cfa3b729a11c885134fd9b5de62a96c Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30691 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-14AGESA: Drop CONFIG_CBB and CONFIG_CDBKyösti Mälkki
Static values, copy paste from multi-node fam15 code. Add header that shall have declarations of functions common to different families factored out. Change-Id: I07bc046c74280f49e46793c119d36b87b8789949 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30732 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-01-14binaryPI: Drop CONFIG_CBB and CONFIG_CDBKyösti Mälkki
Static values, copy paste from multi-node fam15 code. Add header that shall have declarations of functions common to different families factored out. Change-Id: I2401acb9269674bac054fa9a6dd60ca8a21b36a9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30731 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-01-14binaryPI: Drop invalid northbridge.h fileKyösti Mälkki
Pointless to declare static struct in a header. Change-Id: I757f6346017681e32900f67b25fb5700a68d86b8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30900 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-14AGESA/binaryPI: Drop invalid AMD_AGESA_BOLTONKyösti Mälkki
I refused bolton under agesa/ once it turned out to be blobbed. We have AMD_PI_BOLTON. Change-Id: Ic3cb9ada2d4f14b49f6ad54c58e6b950a1732b70 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30899 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-01-14Revert "mb/google/kalista: Disable EC-EFS"Patrick Georgi
This reverts commit 4e3cd744492c7a3d80bca55a35276efeada731e5. Reason for revert: Daisuke says "We'll keep EFS on Kalista/Karma enabled" Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Change-Id: I2f11ffc9dd7eb05a2560261bbf472e8488c274d9 Reviewed-on: https://review.coreboot.org/c/30857 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-30 03:28:42 +0000