| Age | Commit message (Collapse) | Author |
|---|
|
When the configuration of Marvell PHY 88E1512 is finished, then switch
the page back to 0 only once at the end of the Init function.
Change-Id: I9e516870a7c5928724df2bd3ac9c5c8f3249af2e
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73017
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This mainboard is based on mc_ehl1. In a first step, it contains a copy
of mc_ehl1 directory with minimum changes. Special adaptations for
mc_ehl4 mainboard will follow in separate commits.
Change-Id: I3c1f2cf4a3dcae58895f6d14a7fce46b2825e6ba
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72427
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The commit fcff39f0ea47 ("vc/siemens/hwilib: Rename 'maxlen' to
'dstsize'") changed the 'dstsize' input parameter type from uint32_t to
size_t.
This patch changes also the return parameter, which is often directly
compared with the aforementioned input parameter value. This should
introduce no change on 32-bit builds and stay consistent across the
project in the case of 64-bit builds and avoid comparisons of integers
of different width here.
BUG=none
TEST=No changes to hwilib behavior on any of the siemens/mc_apl1 or
siemens/mc_ehl variants.
Change-Id: I0a623f55b596297cdb6e17232828b9536c9a43e6
Signed-off-by: Jan Samek <jan.samek@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72667
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
|
|
Add a new parameter STT_ALPHA_APU' for each DPTC mode.
BUG=b:257149501
BRANCH=None
TEST=Check if the STT value matches the expected setting.
Change-Id: Ib27572712d57585f66030d9e927896a8249e97a7
Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73123
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Reviewed-by: John Su <john_su@compal.corp-partner.google.com>
|
|
With the latest hardware revision, the two GPIOs GPP_B15 and GPP_E19 are
no longer connected to a native function.
BUG=none
TEST=Checked output verbose GPIO debug messages
Change-Id: I266612f041b749aa83b366497b4211fc075c7bd7
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73341
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jan Samek <jan.samek@siemens.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
The Common Clock Configuration (CCC) is a PCIe feature for cases where
the upstream and downstream device of a link share the same reference
clock. After a change in this setting a link re-training is mandatory
to make it effective.
On recent Intel platforms (tested on Elkhart Lake) the FSP code which is
executed before coreboot performs the PCI scan already enumerates all
PCI buses for its internal uses. While this is done, all the PCI express
features of a link are configured, which includes CCC. If the link
supports common clock, FSP performs the link re-training already. When the
execution flow is returned to coreboot, the same link treatment is
applied again (coded in 'pciexp_tune_dev()') and CCC is enabled a second
time, just a few milliseconds after FSP did this already.
Because enabling CCC requires a link re-training, there are two link
re-trainings on the PCIe link within a few milliseconds (one from the FSP
code and one from coreboot) which can lead to issues with a connected
PCIe device on this link. In particular, link issues were discovered
with a Pericom PCIe switch (PI7C9X2G608) on mc_ehl1 where the link has
stalled for a while after the second re-training. This in turn leads to
non-initialized PCI devices on the bus after coreboot has finished.
This patch checks if CCC is already enabled on a link and does not
perform the steps to enable it again in coreboot which safes a link
re-training (and thus execution time) and a potential link stability
issue.
Test=Check log output on mc_ehl1 which shows the following lines:
[DEBUG] PCI: pci_scan_bus for bus 09
[DEBUG] PCI: 09:00.0 [8086/1533] enabled
[INFO ] PCIe: Common Clock Configuration already enabled
Change-Id: I747fa406a120a215de189d7252f160c8ea2e3716
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73310
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add the support LP5 RAM parts for rex:
DRAM Part Name ID to assign
K3KL6L60GM-MGCT 3 (0011)
BUG=b:270708359
TEST=emerge-rex coreboot
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Id0925ccec014c9c535178ed3d908e60889df624d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73344
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Add the support LP5 RAM parts for rex:
DRAM Part Name ID to assign
H58G56BK7BX068 1 (0001)
BUG=b:270708359
TEST=emerge-rex coreboot
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I9eea7e277628992be9b7768a678a50425444002a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73342
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
The DRAM scramble feature enhances DRAM data protection. When it's
enabled, the written DRAM data will be scrambled and hence can prevent
the data from being hacked.
This feature would make debugging more difficult (for example ramoops
would be lost after reset). Therefore, add a new config to allow
enabling or disabling the feature from coreboot, without having to
maintain two versions of the DRAM calibration blob.
BUG=b:269049451
TEST=build pass and check scramble enable or disable successfully
Signed-off-by: Xi Chen <xixi.chen@mediatek.corp-partner.google.com>
Change-Id: Ib4279bc1cc960fae9c9f5da39f4448a5627288d4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73176
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Fast VMode makes the SoC throttle when the current exceeds the I_TRIP
threshold.
TEST=FW_NAME=constitution emerge-brask coreboot
Change-Id: I1e68f708b7740567e24f8a3ddb9832aeec7ee6b5
Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73247
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-by: Pablo Ceballos <pceballos@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
The DC boost bit was intended to be in the Controller Params word rather
than its own byte. Correct this error.
BUG=b:214581372
TEST=build
Change-Id: Ie65e57a351f0fc1f0c80ef320fd87043ee22916c
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73216
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Server platform doesn't have S4 state so select DISABLE_ACPI_HIBERNATE
to remove S4 state from available sleepstates.
Signed-off-by: Tim Chu <Tim.Chu@quantatw.com>
Change-Id: Ie5ddb1a98cd5bbd854b915c93694d1ebcb9bddd2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73248
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jon.zhixiong.zhang@gmail.com>
|
|
The currently used panel type could work with 500 ms but increasing
the value to 1 second allows to use a wider range of LVDS LCD panels,
as many of them specify the delay of 1 s as minimum.
BUG=none
TEST=Test link stability using a panel with minimum re-power delay of
1 s.
Change-Id: I2dd86e791c1212b67a80d7e6cfc474ad91b26c6b
Signed-off-by: Jan Samek <jan.samek@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72804
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
The comment that the PchHdaAudioLink UPDs only configure GPIOs is
incorrect. Setting this GPIO to 1 or 0 will not change the HDA
GPIO configuration; it will make the sound work when set to 1,
or not work when set to 0.
Remove the incorrect comment and make the UPD configurable from the
devicetree.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I6f27f41a4a4b3844a65d45d36aba37c3af1050a0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71715
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
|
|
Replace the SOC_INTEL_TIGERLAKE_S3 and SOC_INTEL_ALDERLAKE_S3 with
the D3COLD_SUPPORT symbol, as it allows for more granular control.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I07e8c84e5ad8f390bfbac017dd23736e7a6ced9e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73291
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Instead of adding the P-state number to the PSTATE_0_MSR number to get
the P-state MSR number for the rdmsr call, provide a macro that directly
calculates the MSR number for a given power state. Also drop the unused
PSTATE_[1..4]_MSR definitions which also didn't cover all P-state MSRs
available in the hardware.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If85acf556efe82c209e1608e56c05f7a2a748403
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73323
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
The latency values in the _CST package override the values in the
p_lvl2_lat and p_lvl3_lat FADT fields. In Picasso, Cezanne, Mendocino,
Phoenix and Glinda generate_cpu_entries generates the _CST packages for
each CPU device. The coreboot code for Stoneyridge doesn't generate _CST
packages for the CPU objects, but those are provided via the PSTATE SSDT
binaryPI generates and agesa_write_acpi_tables gets and adds to the ACPI
tables. The AGESA reference code also sets those two FADT entries to the
equivalents of ACPI_FADT_C2_NOT_SUPPORTED and ACPI_FADT_C3_NOT_SUPPORTED
so this also matches the AGESA behavior.
From the ACPI 6.4 spec: "Values provided by the _CST object override
P_LVLx values in P_BLK and P_LVLx_LAT values in the FADT."
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I1116a3013576b18b6f521604d6b0a9d75b971e0b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73231
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Use the ACPI_SCI_IRQ definition for both the PIC and APIC IRQ number in
the fch_irq_map table. Before the PIC mapping was set to PIRQ_NC, but
both mb/google/kahlee and the other amd mainboards using newer SoCs set
both the PIC and APCI IRQ number to ACPI_SCI_IRQ, so change this here to
match the other mainboards.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I29dde7ca8d2ecf00d8174c2d793ef1ad55ae3e28
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73322
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use the ACPI_SCI_IRQ definition instead of a magic value.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia860668b5c93b1b8882459d9f983cf3a23d16392
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73321
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
IRQ9 is used as ACPI SCI IRQ, so add a define for that and use it in the
code like it is also done in the other SoCs in soc/amd.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iddb51d70c15ab1d7088f62b61e22510bd1b30b1e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73320
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since there's a define for the ACPI_SCI_IRQ 9, use the define instead of
a magic number in the code.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I23c8f62929f3f66192698e10826d10329ef3d8cc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73319
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The FADT data structure is zero-initialized in acpi_create_fadt which
then calls the SoC-specific acpi_fill_fadt function, therefore it's not
needed to assign 0 to the res2 FADT field in acpi_fill_fadt.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ifa69ae61bea82acf66e7210c4103ef48e36dbdd2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73318
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use enum cb_err to return an error/success state instead of an int in
get_nv_rdev and get_nv_rdev_rw.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I73706a93bc1dbc8556e11885faf7f486c468bea9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73317
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The bool type is used although stdbool.h isn't included. Include types.h
which will include both stdint.h and stdbool.h
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I5213ddae3ceb36e0b2e09f8ef3f7f414ebdf187f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73316
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The directory holds boards other than ADL-P, such as ADL-U and ADL-H.
Change-Id: I8e1b67f83d649cd07645a4a519ba1bf2f6f5e7c6
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72802
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
|
|
Select `HAVE_HYPERTHREADING` and hook up the hyper-threading setting
from the FSP to the option API so that related mainboards don't have to
do that. Unless otherwise configured (e.g. the CMOS setting or
overridden by the mainboard code), the value from the Kconfig setting
`FSP_HYPERTHREADING` is used.
Port of commit a182faeb88a0 ("soc/intel/alderlake: Hook up FSP hyper-threading setting to option API")
Change-Id: I0b3e1a4049312c6b1ec950382c92274e0350001f
Signed-off-by: Eran Mitrani <mitrani@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71115
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Fix typo in the comment for Common Clock Configuration.
Change-Id: Idd01e787458a9090d53b9a57547b8158480dcc16
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73311
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
|
|
Enable HAS_RECOVERY_MRC_CACHE config and add RECOVERY_MRC_CACHE FMAP
section to cache the MRC training data in recovery mode.
BUG=b:270569389
TEST=Build and boot to OS in Skyrim. Ensure that the Type 0x63 BIOS
directory entry is populated with the appropriate MRC_CACHE FMAP
section.
Change-Id: I3f0f41c20b61c96473e887521f84f3ad240adc2b
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73250
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
|
|
Use fw_config to probe fingerprint.
BUG=b:269986245
TEST=emerge-skyrim coreboot chromeos-bootimage. Test result is pass
with 1000 reboot cycles.
Change-Id: I4b4bca42dd78dfd5b8636ff3cb05406d2d0c94f7
Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73262
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
|
|
Fast VMode nmakes the SoC throttle when the current exceeds the I_TRIP
threshold.
BUG=b:270640775
BRANCH=firmware-brya-14505.B
TEST=Verify that the feature is enabled by reading from fsp log
Change-Id: I35f577e1bab0f8dda10061903df13730e2c8ee04
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73243
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Bob Moragues <moragues@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
To support an RPL SKU on osiris, osiris must use the FSP for RPL.
Select SOC_INTEL_RAPTORLAKE for osiris so that it will use the RPL
FSP headers for osiris.
BUG=b:270640775
BRANCH=firmware-brya-14505.B
TEST=cherry-pick Cq-Depends, then "emerge-brya intel-rplfsp
coreboot-private-files-baseboard-brya coreboot chromeos-bootimage",
flash and boot osiris to kernel.
Cq-Depend: chromium:4290627, chrome-internal:5516851
Change-Id: If8de42a82fd85ffa8b9836e6024f119bc798f4fc
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73242
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Bob Moragues <moragues@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
It's sufficient to generate CPU devices for all available CPU cores/
threads instead of for the maximum number of possible CPU cores/threads.
TEST=google/careena with 2 cores still boots and Linux doesn't complain
about ACPI errors due to referenced but not present CPU objects.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I6850edfa305304060092cb5480f4296f4f5ddacc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73070
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
On boards with RECOVERY_MRC_CACHE FMAP section, populate type 0x63 BIOS
directory entry in RO with that section. If the RECOVERY_MRC_CACHE
section is not present, then fall back to RW_MRC_CACHE.
BUG=b:270569389
TEST=Build and boot to OS in Skyrim. Ensure that the Type 0x63 BIOS
directory entry is populated with the base and size of appropriate MRC
cache.
Change-Id: I49ec4f64e33c4d5780a7fe6a5540eab42b6cec9f
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73169
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
If a mainboard has RECOVERY_MRC_CACHE and the recovery mode is enabled,
then use APOB data from that section and make any updates to that
section. Otherwise continue to use DEFAULT_MRC_CACHE section.
BUG=b:270569389
TEST=Build and boot to OS in Skyrim.
When in normal mode, DEFAULT_MRC_CACHE is used.
Normal Mode Boot1:
------------------
[DEBUG] FMAP: area RW_MRC_CACHE found @ 0 (122880 bytes)
[INFO ] APOB RAM hash differs from flash
[SPEW ] Copy APOB from RAM 0x02001000/0x1db18 to flash 0x0/0x1e000
[DEBUG] FMAP: area RW_MRC_CACHE found @ 0 (122880 bytes)
[DEBUG] SF: Successfully erased 122880 bytes @ 0x0
[INFO ] Updated APOB in flash
Normal Mode Boot2:
-----------------
[DEBUG] FMAP: area RW_MRC_CACHE found @ 0 (122880 bytes)
[DEBUG] APOB hash matches flash
When the device is in recovery mode, RECOVERY_MRC_CACHE is used.
Recovery Mode Boot1:
--------------------
[DEBUG] FMAP: area RECOVERY_MRC_CACHE found @ 650000 (122880 bytes)
[INFO ] APOB RAM hash differs from flash
[SPEW ] Copy APOB from RAM 0x02001000/0x1db18 to flash 0x650000/0x1e000
[DEBUG] FMAP: area RECOVERY_MRC_CACHE found @ 650000 (122880 bytes)
[DEBUG] SF: Successfully erased 122880 bytes @ 0x650000
[INFO ] Updated APOB in flash
Recovery Mode Boot2:
--------------------
[DEBUG] FMAP: area RECOVERY_MRC_CACHE found @ 650000 (122880 bytes)
[DEBUG] APOB hash matches flash
Switch from Recovery Mode to Normal Mode:
-----------------------------------------
[DEBUG] FMAP: area RW_MRC_CACHE found @ 0 (122880 bytes)
[DEBUG] APOB hash matches flash
Switch from Normal Mode to Recovery Mode:
-----------------------------------------
[DEBUG] FMAP: area RECOVERY_MRC_CACHE found @ 650000 (122880 bytes)
[DEBUG] APOB hash matches flash
Change-Id: I93f357e407c98b6e5fca495f4f779fad54a3430f
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73168
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
This commit separates setting FSP debug params from the rest of code and
configures FSP serial port parameters. Other ports (0x3E8 and 0x2E8)
are omitted since Elkhart Lake FSP only supports 0x3F8 and 0x2F8.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I84f7c19a7c2fd5a4db18f5a37e1c667da017aace
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72404
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
|
|
Remove world-facing microphone for xivu360.
Switching to world-facing camera will use the
user-facing microphone to record sound.
BUG=b:263927799
TEST=emerge-nissa coreboot chromeos-bootimage
Change-Id: Ibb720974b6488ce4453081e0bc5b4e7f34a6b0f6
Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73233
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Reviewed-by: John Su <john_su@compal.corp-partner.google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
|
|
BUG=b:269786649
TEST=build and test USB2 port function works fine
BRANCH=dedede
Change-Id: I63928a0d8ce6b2365250fd96572f4a2db948c19d
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73204
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sam McNally <sammc@google.com>
|
|
To support an RPL SKU on constitution, it must use the FSP for RPL.
Select SOC_INTEL_RAPTORLAKE for constitution so that it will use the RPL
FSP headers.
BUG=b:267539938
TEST=emerge-brask intel-rplfsp coreboot
coreboot-private-files-baseboard-brya
Change-Id: Ie4f5eb6ebb372ad07308ff25c9eb69a83793c656
Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73246
Reviewed-by: Pablo Ceballos <pceballos@google.com>
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update override devicetree based on schematics.
BUG=None
TEST=FW_NAME=constitution emerge-brask coreboot
Change-Id: I883a806950821e6306242975764930035a94888e
Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73110
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Pablo Ceballos <pceballos@google.com>
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
|
|
Remove `fixme` from gpio.h since it has been addressed.
BUG=none
TEST=Only a cosmetic change
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I79a2493dba6becd4b8c1ebf37e452a5a173eb396
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73270
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
Update ec_commands.h from the EC repo at:
"8441cf4 Add host event: EC_HOST_EVENT_BODY_DETECT_CHANGE"
This is an exact copy of the EC repo's ec_commands.h with the
exception of updating the copyright message.
BUG=b:261141172
BRANCH=none
TEST=built coreboot for skyrim
Change-Id: I9892c0c3518f63d357459861e8fa1b7f5f494e68
Signed-off-by: Tim Van Patten <timvp@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73258
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
|
|
Because the ChromeOS boards don't fill a manufacturer in for the memory
SPDs, that information isn't available from the FSP. We can get the
Manufacturer ID based on the memory name from CBI instead. Use this
information to fill in an ID so that the manufacturer name is available
in the SMBIOS information.
BUG=None
TEST=Look at dmidecode output
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I810c3191180dd3b566d7ea64006f29b625b10526
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73255
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
There is a Nanya device used on one of the Google Guybrush devices,
so add it to the list of SPD manufacturer names.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ia449f4d14385cdd5a2548e2a05e3928ea3602c12
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73254
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
The DMI error correction type was not being filled in, so was reporting
as "Error Correction Type: <OUT OF SPEC>". This patch fixes that.
Since it's now filling in information for both Type 16 & 17, rename
the function to reflect that.
BUG=None
TEST=dmidecode now reports the type correctly.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I6b51612d808c63de1acd2be952cb6c152f8a1be5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73253
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
SimNow does not support the Birman EC, so skip the EC configuration
steps when building for SimNow.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I6e879a13a119d593674d3403d4e1b32e0e244d9f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73166
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: Ia7e594ca2b6ea3cd9d6f60e7dcd1ba6ebabf85cb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73165
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Add option for mainboards to target builds for SimNow.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: Id765437b69f1bc3a9f9d7858edcd27e687d5a7f3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73164
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Move 'asmlinkage' before the function type for consistency.
Change-Id: I293590ef917b78c6ed3d151cd0080e42d0f10651
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73259
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I42856424d3b55107f1758fb05f7ddbee3550d8b2
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73200
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
'pragma Compiler_Unit_Warning' is removed upstream:
https://gcc.gnu.org/git/?p=gcc.git&a=search&h=HEAD&st=commit&s=pragma+Compiler_Unit_Warning
Fix:
GCC libgnat-x86_32/lib/gnat/interfac.o
interfac.ads:36:08: warning: unrecognized pragma "Compiler_Unit_Warning" [-gnatwg]
Change-Id: I6d7efab132441dd3cc62a53b7322e9fd355e5059
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73162
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
This patch optimizes CPU MP Init related configs being used within
multiple SoC directory and moving essential configs into common code
to let the SoC user to choose as per the requirement.
TEST=Able to build and boot google/kano and google/rex.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I12adcc04e84244656a0d2dcf97607bd036320887
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73196
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
Remove ACPI node for pen eject event to meet project design.
BUG=b:265106657
TEST=emerge-skyrim coreboot chromeos-bootimage
Change-Id: I732de49c6319397d93671c48a6518c7c7e955fdc
Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73154
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
This reverts commit 363202b43589ec240c4a0c8f5b449fbd5c1333f8.
Reason for revert: Seeing some bit flips on the SPI bus, but cannot
repro reliably on local builds. Going to downgrade back to 50 MHz
to see if builder builds are more stable on each variant as a result.
Signed-off-by: Shelley Chen <shchen@google.com>
Change-Id: I4fe76bac915e3b3c794821cd160a66824e38ea83
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73214
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add new memory parts in the mem_parts_used.txt and generate the
SPD ID for the parts. The memory parts being added are:
DRAM Part Name ID to assign
MT62F512M32D2DR-031 WT:B 0 (0000)
MT62F1G32D4DR-031 WT:B 1 (0001)
MT62F1G32D2DS-026 WT:B 2 (0010)
H9JCNNNBK3MLYR-N6E 0 (0000)
K3LKBKB0BM-MGCP 3 (0011)
BUG=b:265190498
BRANCH=None
TEST=emerge-skyrim coreboot
Signed-off-by: Yunlong Jia <yunlong.jia@ecs.corp-partner.google.com>
Change-Id: I860f10552e4e4180e09ab805ca82b108fdc8f21a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73049
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This reverts commit 3eb17b91daac0b3acaffb01568d724d23c6f0eea.
Reason for revert:
PLTRST only keeps 18xms and it's too short for eMMC disk fully reset.
Change-Id: If4277cb600bfe4e071959dacaf204fe7d3518f68
Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73202
Reviewed-by: Kevin Chiu <kevin.chiu.17802@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
This reverts commit 0e0f9e51c4c4f190cbe7ef5bffa138601c644d3c.
Reason for revert:
PLTRST only keeps 18xms and it's too short for eMMC disk fully reset.
Change-Id: I13b93747bdb4d39de1ffcfdc020648871fa6e048
Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73203
Reviewed-by: Kevin Chiu <kevin.chiu.17802@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Update GPP_E12,GPP_E13,GPP_H19 in ramstage.
Update GPP_F11 in bootblock.
TEST=emerge-brask coreboot
Change-Id: Icdca7f574282da140ec64cea9cdda3ebccbe3eb8
Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73194
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Pablo Ceballos <pceballos@google.com>
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Elkhartlake based SoCs uses Intel's Management Engine (ME), version 15.
This patch selects ME 15 specification defined at common code and
removes elkhartlake SoC specific ME code and data structures.
BUG=b:260309647
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: I3186f509c63b3a892c72cb1fa08fc094735d6eeb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73245
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Alderlake based SoCs uses Intel's Management Engine (ME), version 16.
This patch selects ME 16 specification defined at common code and
removes alderlake SoC specific ME code and data structures.
BUG=b:260309647
Test=Build verified for brya.
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: Ib94e4662c735b1c31c8dfca1cfa881e6fa4070fa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73244
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Cannonlake based SoCs uses Intel's Management Engine (ME), version 12.
This patch selects ME 12 specification defined at common code and
removes cannonlake SoC specific ME code and data structures.
BUG=b:260309647
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: Ifc64cf63736bb730492b1732a22669a0415816a3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73140
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Jasperlake based SoCs uses Intel's Management Engine (ME), version 13.
This patch selects ME 13 specification defined at common code and
removes jasperlake SoC specific ME code and data structures.
BUG=b:260309647
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: Icf4bc651e94d6ec977ed8f2381d7184337dc1ea5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73139
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Tigerlake based SoCs uses Intel's Management Engine (ME), version 15.
This patch selects ME 15 specification defined at common code and
removes tigerlake SoC specific ME code and data structures.
BUG=b:260309647
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: If4fbfd7c591794ed945c1e9e8487a9e9723c7551
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73138
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Meteorlake based SoCs uses Intel's Management Engine (ME), version 18.
This patch selects ME 18 specification defined at common code and
removes meteorlake SoC specific ME code and data structures.
BUG=b:260309647
Test=Build verified for rex.
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: I36ee66f94f0c37ab6a134e79e49da9abc83b93cb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73137
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
This patch adds ME specific source code at common location in order to
reduce maintenance efforts at SoC level and improve readability. The
functionality and code are redundant for various SoC platforms and
require more maintenance.
BUG=b:260309647
Test=Build verified for brya and rex.
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: Ic6622662fd3b8bcc9d9ac8bd6ffa732f5d78801a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73133
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch includes ME specification datastructures for various ME
versions. Including the ME specification in common code will help
current and future SoC platforms to select the correct version based on
the applicable configuration. It might be also beneficial if two
different SoC platforms would like to use the same ME specification and
not necessarily share the same SoC directory.
BUG=b:260309647
Test=Build verified for brya and rex.
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: I83df41d7180d2df419849a0c01c728ff0fe75378
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73129
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch includes ME specification configuration for various versions,
which will allow SoCs to get ME support by selecting the correct
version.
BUG=b:260309647
Test=Build verified for brya and rex.
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: I817d14e52b0d353bbb4316d6362fcb80cbec3cda
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73128
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Rather than explicitly checking for Recovery or Developer mode via
vboot, use display_init_required() so that vboot is not required, and
other instances where the display is needed pre-OS (such as when
applying a critical system update) are covered as well.
With this change, SoCs implementing selective GOP init will need to
select VBOOT_MUST_REQUEST_DISPLAY in order for display_init_required()
to not assert on compilation.
BUG=b:255812886
TEST=build/boot skyrim
Change-Id: Iac7e06863764a9f21c8a50fc19050cb5a6627df2
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73046
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Rather than explicitly checking for Recovery or Developer mode via
vboot, use display_init_required() so that vboot is not required, and
other instances where the display is needed pre-OS (such as when
applying a critical system update) are covered as well.
Select VBOOT_MUST_REQUEST_DISPLAY in order for display_init_required()
to function properly (and not assert on compilation).
BUG=b:255812886
TEST=build/boot skyrim
Change-Id: If2fee71bcc11468fd2db0abaafe4ea35e2953993
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73047
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
The headers added are generated as per FSP v4031.01
BUG=b:270416522
BRANCH=firmware-brya-14505.B
TEST=Boot to OS
Cq-Depend: chrome-internal:5513169, chrome-internal:5511170
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Change-Id: Ia21807ee71c98489fd96f870c2d61f54e094c3d0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73198
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
Define some actions based on probe results for audio:
- Disable the SoundWire GPIOs when I2S option is selected.
- Disable the I2S GPIOs when SoundWire option is selected.
- Disable all the GPIOs when no audio is enabled.
BUG=b:269497731
TEST=Test that GPIOs are configured based on the current
value of the fw_config field in cbi.
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I0ed452a0d08e6779add318d9bbd1e97b50b6aea9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73121
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
In order to improve gpio merge mechanism. Change iteration override
to padbased table override. And the following patch will change fw
config override with ramstage gpio table override.
Port of commit 7aef2b1294f2 ("mb/google/nissa: Apply gpio padbased
table override")
BUG=none
TEST=Verify devbeep at depthcharge console
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I2ee86bbec7d25a35d726f29ad79891f1054bf52c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73182
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
The reset bit mapping was incorrectly assigned to GPIO groups. The
reset mapping for Community 0 actually reflects the GPD reset mapping.
Change the Community 0 reset mapping to the correct default map and fix
the GPD reset mapping.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I2b9d093ca7ea0f5087f49671ca457c0b45927918
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72406
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Change-Id: I5f534a898de4ba58ac7d65c5bd6ee10eafa648e4
Signed-off-by: Jonathan Zhang <jonzhang@meta.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72614
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
|
|
Introduce at new config option CONFIG_FSP_PUBLISH_MBP_HOB to control
the creation of ME_BIOS_PAYLOAD_HOB (MBP HOB) by FSP.
This new option is hooked with `SkipMbpHob` UPD and is always disabled
for RPL & ADL-N based ChromeOS platforms.
It is not disabled for ADL-P based platforms because ADL-P FSP relies
on MBP HOB for ChipsetInit version for ChipsetInit sync. As ChipsetInit
sync doesn't occur if no MBP HOB, so it results S0ix issue. This
limitation is addressed in the later platforms so creation of MBP HOB
can be skipped for ADL-N and RPL based platforms.
This made skip_mbp_hob SOC chip config variable redundant which is also
removed as part of this change.
BUG=none
TEST=Build and boot to Google/Taniks.
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: Ia396b633a71aedf592c45b69063ee0528840fd2b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71996
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
In the current Kconfig option MEDIATEK_BLOB_FAST_INIT, the meaning of
"BLOB" is unclear. Add "DRAM" to the name.
BUG=b:204226005
TEST=./util/abuild/abuild -t GOOGLE_STEELIX -x
Change-Id: Ida7bda770f1d1a40cae205b08c8cb22f2329e49f
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73155
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
MX98357A is not a soundwire codec, so move it out of
drivers/intel/soundwire node.
BUG=none
TEST=Build and boot MTL-P RVP to Chrome OS. Verify I2S audio card
enumeration and no max98357a entry under /sys/bus/soundwire/devices.
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Change-Id: I24fc7084ea18445c341eed012cfacde8de126fd8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73189
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Usha P <usha.p@intel.com>
|
|
Setup FW_Config for our project.
Configure USBHub\PIXA Touchpad\Audio(rt5682s & alc1019).
BRANCH=None
BUG=b:262798445, b:268621319
TEST=emerge-skyrim coreboot
Signed-off-by: Yunlong Jia <yunlong.jia@ecs.corp-partner.google.com>
Change-Id: I2c590ae36d4d089f70e1799189cd414f825e5b8b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73048
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Chao Gui <chaogui@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This reverts commit 272c9c07bd9c7dcd684614c67487504ce06f7a36.
Reason for revert: Sorry was going to give +2 but pressed the submit
button and accidentally merged this out of train.
Change-Id: I8a2c6407832bdcf3d475209356501f8fc3672f6b
Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73213
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Alderlake based SoCs uses Intel's Management Engine (ME), version 16.
This patch selects ME 16 specification defined at common code and
removes alderlake SoC specific ME code and data structures.
BUG=b:260309647
Test=Build verified for brya.
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: I94cb8a9cbb6167d1a11a012efbd6a135a8692969
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73135
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This fixes MP init on xeon_sp SoCs which was broken by 69cd729 (mb/*:
Remove lapic from devicetree).
Alderlake cpu code was linked in romstage but unused so drop it.
Change-Id: Ia822468a6f15565b97e57612a294a0b80b45b932
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72604
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Use the existing IO_APIC2_ADDR definition instead of a magic value.
TEST=Timeless build results in identical image for pcengines/apu2
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I7ee039e23309fdae0d614bb1fb0610d82564bf3b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73186
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
The coreboot-common acpi_create_fadt writes a pointer to the FACS table
into both firmware_ctrl and x_firmware_ctl_l FADT fields and sets
x_firmware_ctl_h to zero. When x_firmware_ctl_[l,h] is non-zero, the
pointer in firmware_ctrl will be ignored, but that's what is already
done on Cezanne and newer.
TEST=Linux doesn't complain about any new ACPI problem on Mandolin.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ib9eab4dcf828f28a60c6312ec96872aac4cfb266
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73190
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
The FADT data structure is zero-initialized in acpi_create_fadt which
then calls the SoC-specific acpi_fill_fadt function, therefore it's not
needed to assign 0 to the ARM_boot_arch FADT field in acpi_fill_fadt.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id2d24a9b8d5b04271eb4da6a622b5bba66dbc501
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73188
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
The FADT data structure is zero-initialized in acpi_create_fadt which
then calls the SoC-specific acpi_fill_fadt function, therefore it's not
needed to assign 0 to the ARM_boot_arch FADT field in acpi_fill_fadt.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ica968db1228a2d63e83f2b6c4ea57c5f02bf1504
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73187
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
This patch makes EC wake up AP from s3/s0ix for OS shutdown/hibernate
when the state of charge drops to low_battery_shutdown_percent.
BUG=b:255465618
TEST=emerge-nissa chromeos-bootimage (EC: https://crrev.com/c/4243898)
Verify system resumes from s0ix and then enter S5 on nivviks with steps:
1. disconnect AC
2. powerd_dbus_suspend --disable_dark_resume=false
3. fakebatt 5
4. fakebatt 4
Change-Id: I63b5246432687e38ddfc5733ac3a115c3456d7e9
Signed-off-by: Ivan Chen <yulunchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73082
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
|
|
Add common device tree used for EGS platform. Also add register
setting shared for all EGS platform.
Signed-off-by: Tim Chu <Tim.Chu@quantatw.com>
Change-Id: I812f621ee9d1643fd4fa35df92443d64f7aaabc3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73077
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: Simon Chou <simonchou@supermicro.com.tw>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This reverts commit 2e6fa8206e0a3bdd2e53542b6377fe2b37e3f26e.
Reason for revert: causing `redefinition` issue.
src/mainboard/google/poppy/variants/nami/gpio.c:527:26: error: redefinition of 'variant_romstage_gpio_table'
const struct pad_config *variant_romstage_gpio_table(size_t *num)
^
src/mainboard/google/poppy/variants/nami/gpio.c:426:26: note: previous definition is here
const struct pad_config *variant_romstage_gpio_table(size_t *num)
^
Change-Id: I107cce8bf3a5bf38edb39b9d46512ee0d467d354
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73210
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The current clock register definition is wrong, which results in wrong
audio sampling rate. Fix it by adjusting the POSTDIV registers of
APLL1-APLL5.
TEST=build pass
BUG=b:250459803, b:250464574
Change-Id: I7a627169593f41906856777d738c6b13ff72d5a0
Signed-off-by: Johnson Wang <johnson.wang@mediatek.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73134
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
MT8188 supports port0/port1 download. The hardware needs a trapping pin
to select the port to use. When port1 is selected, the phy of port1 will
be switched to port0. That is, port1 connector will be the physical line
of port0. Since port0 phy isn't initialized in coreboot, switch back to
port1 phy.
BUG=b:269059211
TEST=can detect USB2 devices in depthcharge.
Change-Id: Ic97d0bd9d0233883196b2e73ac2a22cd8ea9466b
Signed-off-by: Shaocheng Wang <shaocheng.wang@mediatek.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73170
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
USB2 port 6 may be used for a PL2303 USB to UART bridge, so enable the
port.
BUG=b:269690930
TEST=kernel can detect a PL2303 USB device
BRANCH=dedede
Change-Id: I0ba421c3a502e69d101de40bbd31122211d3fb05
Signed-off-by: Sam McNally <sammc@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73125
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
|
|
Add functionality such that the FPMCU is power cycled long enough
on boot to ensure proper reset.
This solution relies solely on coreboot to sequence the power and reset
signals appropriately (150ms on boot).
BUG=b:245954151
TEST=Confirmed FPMCU is still functional on Nami.
Confirmed power is off for 150ms seconds on boot.
Confirmed RCC_CSR of FPMCU indicates power cycle occurred.
Confirmed reset is de-asserted approx 3ms after power application
(target >2.5ms)
Change-Id: I21eb85dc11e0ea0eb5de8a6092b01663d3c3df91
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68820
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Phoenix2 VBIOS PCI DID is 15c8 though the VBIOS image uses a different
PCI ID i.e. 0x1205, so we need to implement map_oprom_vendev for the SoC.
Change-Id: I7eef5eb41b781f02abb9dd4098e92a8652a431f5
Signed-off-by: Ritul Guru <ritul.bits@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73122
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
VGA defineds the extended ASCII set based on CP437, but there is a bug
on printing them: in vga_write_at_offset(), we perform a bitwise or
between 'unsigned short' and 'signed char':
```
p[i] = 0x0F00 | string[i];
```
If we want to show an extended ASCII character, string[i] will be
negative and this bitwise operation will fail due to their implicit
casting rule: convert signed char to unsigned short by adding 65536.
To fix this, we need to cast the string to unsigned char manually
somewhere. Since we still want to leverage the built-in string utilities
which only accepts const char*, we still preserve the original
prototypes before, and cast it until we write into the frame buffer.
BRANCH=brya
BUG=b:264666392
TEST=emerge-brya coreboot chromeos-bootimage
and verify drawing characters with code > 127.
Change-Id: I9cd65fe9794e5b0d338147924f28efd27fc8a1e8
Signed-off-by: Hsuan Ting Chen <roccochen@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73090
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ice15f0ce591104a2ace186f9049748219c2bc097
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73141
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Based on product spec v1.4, update T3 timing from 180 ms to 150 ms.
BRANCH=none
BUG=b:262734395
TEST=emerge-skyrim coreboot chromeos-bootimage
Then the Elan touchscreen works fine.
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Change-Id: I0d8f1e008276fccdfbb8c76cfebaccbe71160b64
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73130
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
|
|
After first recovery request coreboot would get stuck in bootloop with
VB2_RECOVERY_PREAMBLE as recovery reason due to not checking whether
coreboot is alread in recovery mode, and calling failing code.
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Change-Id: Idc947a1d150ff6487cf973b36bf4f0af41daa220
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73091
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Package C state demotion is now disabled for all RPL SoCs from within
soc/intel/alderlake/fsp_params, so no need to duplicate that in the
skolas devicetree.cb.
BUG=268296760
BRANCH=firmware-brya-14505.B
TEST=Boot and verified that S0ix issue is resolved.
Change-Id: I1c630e2efbdddd18a5423c79b73269e9b1be79c7
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73074
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
The EFS entry at offset 0x14 can point to either the first level PSP
directory table or to the PSP combo directory structure that was used
before the introduction of the AMD A/B recovery scheme. This scheme is
not to be confused with the VBOOT scheme. The PSP verstage code checks
if the header this entry points to begins with the PSP_COOKIE, which
indicates the entry is a first level PSP directory table. Due to that,
the EFS entry at offset 0x14 is always expected to point to a PSP
directory table, so rename combo_psp_directory to new_psp_directory to
match the actual usage. This EFS entry that points to the PSP directory
table is called new_psp_directory, since the entry at EFS offset 0x10
was used on some early AMD chips to point to the older PSP directory
table and that one is already called psp_directory. amdfwtool uses the
same naming scheme for those two PSP directory table pointers.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I10f19ee63f8d422433dba64402d84fd6bb9e0f9e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73083
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Select NO_S0IX_SUPPORT for `starlabs/starbook` and `atlas/prodrive`
so their configurations are unchanged.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I718952165daa6471f11e8025e745fe7c249d3b46
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72800
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Report `4` in `_S0W` only when D3COLD_SUPPORT is enabled, as if it
is not, it will break S3 exit.
When D3COLD_SUPPORT is not enabled, return `3` (D3Hot).
This fixed S3 exit on both TGL and ADL. Tested on StarBook
Mk V and Mk VI.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I3a4b89132b594ad568a5851137575f921f8e2a2e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72765
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
