summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2020-05-01soc/intel/broadwell: Fix 16-bit read/write PCI_COMMAND registerElyes HAOUAS
Change-Id: I0fd1a758d8838b3eea5640b41eee6a6893360aa3 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40850 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-05-01cpu/x86/mtrr/earlymtrr: Validate MTRR argumentsRaul E Rangel
The AMD64 Architecture Programmer's Manual, Volume 2: Systems Programming says the following about variable MTRRs: Variable Range Size and Alignment. The size and alignment of variable memory-ranges (MTRRs) and I/O ranges (IORRs) are restricted as follows: * The boundary on which a variable range is aligned must be equal to the range size. For example, a memory range of 16 Mbytes must be aligned on a 16-Mbyte boundary (i.e., naturally aligned). * The range size must be a power of 2 (2^n , 52 > n > 11), with a minimum allowable size of 4 Kbytes. For example, 4 Mbytes and 8 Mbytes are allowable memory range sizes, but 6 Mbytes is not allowable. Print out errors if these conditions are violated. I didn't assert since `set_var_mtrr` can be used in boot block before the serial console is enabled. BUG=b:147042464 TEST=Boot trembyle and see MTRR errors: MTRR Error: base 0xcc800000 must be aligned to size 0x1000000 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I8b8c734c7599bd89cf9f212ed43c2dd5b2c8ba7b Reviewed-on: https://review.coreboot.org/c/coreboot/+/40762 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-01sb/intel/i82801gx: Fix 16-bit read/write PCI_COMMAND registerElyes HAOUAS
Change-Id: I11b8743234cb1292db8c930edecf8fb5c47d63fd Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40741 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-05-01mb/google/dedede: Fix crossystem wpsw_cur errorSubrata Banik
Add GPIO_PCH_WP (GPP_C11) to associate GPP_PCH_WP with community zero. TEST=Build coreboot, flash, boot to and log into kernel, execute "wp enable" in console, execute "crossystem" at kernel prompt and verify that "wpsw_cur" shows as being "1", Execute "wp disable" in console, execute "crossystem" at kernel prompt and verify "wpsw_cur" is 0. Change-Id: Ie4ae1365a7611b8be3e795798c171e3f7ea9e417 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40744 Reviewed-by: Usha P <usha.p@intel.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-01soc/amd/picasso: initialize i2c controllers in SoC flowAaron Durbin
BUG=b:153642124 TEST=Saw I2C communication Change-Id: I31f8b97d1ff7b687d7e078d5b594d1ad73c815e7 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2145457 Commit-Queue: Furquan Shaikh <furquan@chromium.org> Tested-by: Furquan Shaikh <furquan@chromium.org> Reviewed-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40868 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-05-01soc/amd/picasso/bootblock: Remove duplicate sb_reset_i2c_slavesRaul E Rangel
sb_reset_i2c_slaves is called in fch_pre_init. BUG=b:153675916 TEST=Builds on trembyle Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I157e473984257d633ceb3ef9df45c71a31c5c00b Reviewed-on: https://review.coreboot.org/c/coreboot/+/40867 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-05-01soc/amd/picasso/bootblock/bootblock: Remove duplicate i2c initRaul E Rangel
fch_early_init already calls i2c_soc_early_init(). BUG=b:153675916 TEST=Boot trembyle and only see 1 i2c initialization message Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I689616fb617904df1781be3abe9d1dc580608173 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40866 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-05-01soc/amd/picasso: Allow mainboard to provide pci ddi descriptorsAaron Durbin
Mainboards must provide their DDI descriptors. BUG=b:153502861 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2146443 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2146439 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2146438 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2145453 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2145454 Change-Id: Ib3f115711e74d0e6eb5b063b3dccb36b265779af Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40875 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-01ec/google/chromeec: Fix incorrect diag messageVictor Ding
The expected error code observed in clear_pending_events() should be EC_RES_UNAVAILABLE(9), not EC_RES_INVALID_COMMAND(1). BUG=b:153896701 Change-Id: I609490ceef675267760d34b5e9775211da93347c Signed-off-by: Victor Ding <victording@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40900 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-01mb/google/deltaur: Add BT reset gpioEric Lai
Harrison Peak (HrP) 9560 module needs a reset pin for BT power sequence. BUG=b:155248677 TEST=Boot into OS and check BT is functional. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I55ed1b095ba53c414c44088f4a6e7720b970e2f2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40831 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-05-01soc/intel/{jsl,tgl}: Rename PcdDebugInterfaceFlags macros for better ↵Subrata Banik
understanding BIT 1 -> DEBUG_INTERFACE_UART_8250IO BIT 4 -> DEBUG_INTERFACE_LPSS_SERIAL_IO Change-Id: I566b9dc82b2289af42e58705ebeee51179886f1f Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40904 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2020-05-01mb/google/deltaur: Update USB/WWAN configIvy Jian
Update USB3 ports configuration as schematics design. BUG=b:155026295 TEST=Boot into OS and check WWAN device detected by lsusb. Signed-off-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com> Change-Id: Icb938e5a9c05fcc9772219b081a6f05334261baf Reviewed-on: https://review.coreboot.org/c/coreboot/+/40818 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-01acpi_device: Make integer array input variable constDuncan Laurie
An array of 64bit integers is passed to acpi_dp_add_integer_array() but it is not const so can't take a const array without a compiler error. The function does not modify the array so it can be made const without breaking anything and allowing a const array to be passed in the future. BUG=b:146482091 Signed-off-by: Duncan Laurie <dlaurie@google.com> Change-Id: I98ecdaef5ddfa2026390e2812f5ea841ee51f073 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40882 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-01arch/x86/acpi: Add define for generic container HIDDuncan Laurie
The generic container HID is defined in ACPI specification as PNP0A05. BUG=b:146482091 Signed-off-by: Duncan Laurie <dlaurie@google.com> Change-Id: I3632e77533a47f22b92259b469b03e63f51687e0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40881 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-05-01arch/x86/acpi_device: Allow empty child referencesDuncan Laurie
Currently if a child table is created and added to a property list without adding any properties to that child it will generate an empty package. For example: struct acpi_dp *dsd = acpi_dp_new_table("_DSD"); struct acpi_dp *prop = acpi_dp_new_table("PROP"); acpi_dp_add_child(dsd, "dsd-prop", prop); acpi_dp_write(dsd); Results in an empty PROP package: Name (_DSD, Package (2) { ToUUID("dbb8e3e6-5886-4ba6-8795-1319f52a966b") Package (1) { Package (2) { "dsd-prop", "PROP" } } } Name (PROP, Package (0) { } Empty packages don't seem to be explicitly forbidden, but they don't serve a purpose with device properties. Instead, if packages without any properties or children are skipped then this empty package is not written and the added child property can refer to another property that is already defined. This allows creating property references to existing tables, which can save duplication and namespace collision issues with nested properties. BUG=b:146482091 Signed-off-by: Duncan Laurie <dlaurie@google.com> Change-Id: I9fee2ceb8a4496b90c7210533eee8c2b186cdfff Reviewed-on: https://review.coreboot.org/c/coreboot/+/40880 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-05-01soc/intel/jasperlake: fix args of dimm_info_fill() for dram_part_numMarco Chen
BUG=b:152019429 BRANCH=None TEST=1. provision dram_part_num field of CBI 2. modify mainboard - dedede to report DRAM part number from CBI 3. check DRAM part number is correct in SMBIOS for memory device Change-Id: I509d06a81bd005c5afe6e74a2da2ca408dee7b29 Signed-off-by: Marco Chen <marcochen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40833 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-05-01mainboard/google/kahlee: move specific setting to variantKevin Chiu
Separate specific setting to variant from baseboard. baseboard/romstage.c in current release is only utilized by careena, we could remove it from the rest of variant build. BUG=b:154357210,b:154848243 BRANCH=master TEST=emerge-grunt coreboot Change-Id: I658526e44aadc47bdc5538f506a1bfe2e5f20f63 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40796 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2020-05-01soc/intel/cannonlake/bootblock: Fix FSP CARPatrick Rudolph
Fix FSP CAR on platforms that have ROM_SIZE of 32MiB. CodeRegionSize must be smaller than or equal to 16MiB to not overlap with LAPIC or the CAR area at 0xfef00000. Tested on Intel CFL, the new code allows to boot using FSP-T. Change-Id: I4dfee230c3cc883fad0cb92977c8f5570e1a927c Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39491 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Andrey Petrov <andrey.petrov@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-01mb/google/octopus/variants/bobba: Disable XHCI LFPS power managementSheng-Liang Pan
LTE module is lost after idle overnight, with this workaround, host will not initiate U3 wakeup at the same time with device, which will avoid the race condition. Disable XHCI LFPS power management. If the option is set in the devicetree, the bits[7:4] in XHCI MMIO BAR + offset 0x80A4 (PMCTRL_REG) will be updated from default 9 to 0. BUG=b:146768983 BRANCH=octopus TEST=build coreboot with DisableXhciLfpsPM being set to 1 and flash the image to the device. Run following command to check if bits[7:4] is set 0: >iotools mmio_read32 "XHCI MMIO BAR + 0x80A4" Signed-off-by: Pan Sheng-Liang <sheng-liang.pan@quanta.corp-partner.google.com> Change-Id: Ib8e5ae79e097debf0c75ead232ddbb2baced2a2a Reviewed-on: https://review.coreboot.org/c/coreboot/+/40303 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Henry Sun <henrysun@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2020-05-01mb/google/volteer/malefor: Enable touch screenWilliam Wei
Enable Goodix touch screen and ensure it works properly. BUG=b:154191288 TEST=FW_NAME=malefor emerge-volteer coreboot chromeos-bootimage Boot to kernel and check the Goodix touch screen function. Signed-off-by: William Wei <wenxu.wei@bitland.corp-partner.google.com> Change-Id: I236ac56dd0a1817092151bae93e699115ba88e4c Reviewed-on: https://review.coreboot.org/c/coreboot/+/40598 Reviewed-by: Alex Levin <levinale@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-01vc/eltan/security/verified_boot/vboot_check.c: Increase wb_buffer sizeFrans Hendriks
Running commit aee0baf0690681fae85d24e6887d6cbb9209de83 on Facebook fbg1701 results in an error: VB2:vb2_rsa_verify_digest() ERROR - vboot2 work buffer too small! ERROR: HASH table verification failed! The actual vboot structures require more space. Workbuffer size needs to be increased. We didn't determine the commit causing the issue because this change fixes the issue. BUG=N/A TEST=Build and boot Facebook fbg1701 Change-Id: I5caebc643eb493f4285c2f2fc164ff3a5d35e24e Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40526 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
2020-05-01soc/amd/common/block/graphics/graphics: Add missing const to fill_ssdtRaul E Rangel
BUG=none TEST=Made sure trembyle builds Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I9df70fd5c41a9a68edc7be3c2e920c4dc94d5af9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40871 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-01mb/purism/librem_skl: Use ACPI backlight controlsBenjamin Doron
Enables ACPI backlight controls. Change-Id: Iccf50f427b7555ee1a3ef9cc11a89d532789ac54 Signed-off-by: Benjamin Doron <benjamin.doron00@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40145 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2020-05-01soc/amd/picasso: Enable cache in bootblockFelix Held
Unlike prior AMD devices, picasso cannot rely on the cache-as-RAM setup code to properly enable MTRRs. Add that capability to the bootblock_c_entry() function. In addition, enable an MTRR to cache (WP) the flash boot device and another for WB of the non-XIP bootblock running in DRAM. BUG=b:147042464 TEST=Boot trembyle to payload and make sure bootblock isn't abnormally slow. Change-Id: I5615ff60ca196e622a939b46276a4a0940076ebe Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38691 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-01security/vboot: Convert reboot-related errors to vboot2-styleYu-Ping Wu
Error codes are renamed as follows: VBERROR_SHUTDOWN_REQUESTED --> VB2_REQUEST_SHUTDOWN VBERROR_REBOOT_REQUIRED --> VB2_REQUEST_REBOOT VBERROR_EC_REBOOT_TO_SWITCH_RW --> VB2_REQUEST_REBOOT_EC_SWITCH_RW VBERROR_EC_REBOOT_TO_RO_REQUIRED --> VB2_REQUEST_REBOOT_EC_TO_RO BRANCH=none BUG=b:124141368, chromium:988410 TEST=emerge-nami coreboot Cq-Depend: chromium:2143030 Change-Id: Id82cf85f49dfb63a9c3d41aacd3969786bffcac7 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40749 Reviewed-by: Joel Kitching <kitching@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-01soc/intel/tigerlake: Fill PcieRpClkReqDetect from devicetreeMeera Ravindranath
This CL adds support to fill PcieRpClkReqDetect UPD from devicetree. Filling this UPD will allow FSP to enable proper clksrc gpio configuration. BUG=None BRANCH=None TEST=Build and boot tglrvp. Change-Id: Iad0ba94fea019623a5b98fff0cb4a2cd1d2a7bd7 Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40832 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2020-05-01mb/google/hatch/vr/puff: Add psys_pmax calculationTim Chen
This patch adds psys_pmax calculation. There are two types of power sources. One is barrel jack and the other is USB TYPE-C. The voltage level is fixed for a barrel jack while TYPE-C may vary depending on power ratings. We need to get voltage information from EC and calculate correct psys_pmax value. The psys_pmax needs to be set before FSP-S since FSP-S will handle the setting passing to pcode, so move the routine ahead to variant_ramstage_init. BUG=b:151972149 TEST=emerge-puff coreboot chromeos-bootimage check firmware log and ensure psys_pmax is passed to FSP check the data from dump_intel_rapl_consumption in the OS and ensure the power data is close to an external power meter. Change-Id: Iff767d4b44a01e766258345545438a54a16d1af5 Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40828 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2020-05-01sb/common/smihandler: Fix 16-bit read/write to PCI_COMMAND registerElyes HAOUAS
Change-Id: Ib403f5a231f86bdc60b956e72a4ae631aa6a3899 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40742 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-05-01mb/google/dedede: Enable USB port for camera supportIan Feng
Support USB Chicony user facing camera. BUG=b:155109736 BRANCH=None TEST=Build and Boot waddledoo board and able to capture image using user facing camera. Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Change-Id: I7580a58086977e239dca49c1def4f03583831662 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-05-01sb/intel/i82801jx: Fix 16-bit read/write PCI_COMMAND registerElyes HAOUAS
Change-Id: If39cdfb21fec307141593f2482e014e146d4f1f2 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40795 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-05-01sb/intel/i82801ix: Fix 16-bit read/write PCI_COMMAND registerElyes HAOUAS
Change-Id: I5a07a00e1183ef834d97c11268935617cfe17faa Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40794 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-05-01sb/intel/lynxpoint: Fix 16-bit read/write PCI_COMMAND registerElyes HAOUAS
Change-Id: I81b740e0cfcf0e1bf096427b45ffba06d357fee6 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40792 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-05-01sb/intel/ibexpeak: Fix 16-bit read/write PCI_COMMAND registerElyes HAOUAS
Change-Id: I212ef304a03d068232f50a71c318e2b468336339 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40791 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-05-01soc/amd/stoneyridge: Fix 16-bit read/write PCI_COMMAND registerElyes HAOUAS
Change-Id: I7b39e895501c3bc672a9dffec06b7969dc2f911f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40789 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-05-01mb/intel/jasperlake_rvp: Select PcieRpClkReqDetect in device treeMeera Ravindranath
This CL selects the PcieRpClkReqDetect for the required root ports which is needed to allow proper clksrc gpio configuration. Also, sets the unused PcieClkSrcUsage to 0xFF. BUG=None BRANCH=None TEST=Build and boot jslrvp with NVMe Change-Id: Ie4ae1365a7621b8be3b795798c171e3f7ea9e487 Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40758 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: V Sowmya <v.sowmya@intel.com> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
2020-05-01soc/intel/jasperlake: Fill PcieRpClkReqDetect from devicetreeMeera Ravindranath
This CL adds support to fill PcieRpClkReqDetect UPD from devicetree. Filling this UPD will allow FSP to enable proper clksrc gpio configuration. BUG=None BRANCH=None TEST=Build and boot jslrvp with NVMe Change-Id: Iad0b394fea019223a5b98fff0cb4a2bd1d2a7bd7 Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40757 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: V Sowmya <v.sowmya@intel.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
2020-05-01src: Remove not used 'include <smbios.h>'Elyes HAOUAS
Change-Id: I12345a5b6c9ce94ca9f8b555154b2278a8ff97bf Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39816 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-01include/device/device.h: Include <smbios.h>Elyes HAOUAS
smbios_slot_{type,data_width,length,designation} used for smbios_type_9 needs "smbios.h" Also use already defined 'smbios_type11' in "smbios.h". This will also include <smbios.h> in "static.c" file, this we can remove indirect includes of <smbios.h> in "chip.h" Change-Id: Id412a504da2fd75648636febd150356569e07935 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40310 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-01mb/google/dedede: Remove pad termination for RAM_STRAP_4Karthikeyan Ramasubramanian
The stuffed resistor straps are weaker compared to the internal pull-up. This can cause the GPIO to read '1' always. Remove the internal pull-up. Also read the GPIO only on the boards where the board version is populated. BUG=b:154301008 TEST=Build and boot the mainboard. Change-Id: Ib640211b9f50dfb0174a570eda1625bacbebb855 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40531 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-05-01Helios: Update DPTF settings for smooth fan speed controlSumeet R Pawnikar
Update DPTF settings for smooth fan speed control. BRANCH=firmware-hatch-12672.B BUG=b:154074920 TEST=Built and test on Helios system Change-Id: I3f4d9fd9e17541dd5fb7982a8b43a039c41cba87 Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40530 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-05-01mb/google/dedede: Enable camera support for waddledooPandya, Varshit B
BUG=None BRANCH=None TEST=Build and Boot waddledoo board and able to capture image using world facing camera. Change-Id: I51dcf96a82535fc1e0b9247fd52af919885575e5 Signed-off-by: Pandya, Varshit B <varshit.b.pandya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40476 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-05-01mb/google/dedede: Add ACPI support for cameraPandya, Varshit B
1. Add support as per the schematics 2. Add 2 Ports and 2 Endpoints 3. Add support for OTVI8856 and OTVI5676 4. Add ON and OFF logic as Power Rails are same for both sensor BUG=None BRANCH=None TEST=Build and Boot waddledoo board and able to capture image using world facing camera. Change-Id: Ic8687bce4896d9fc17b2190b8d11618af3515cc1 Signed-off-by: Pandya, Varshit B <varshit.b.pandya@intel.com> Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39360 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-05-01sb/intel/common/{madt,rcba_pirq}.c: Convert to 96 characters line lengthElyes HAOUAS
Change-Id: I62a213013d9008d8a4a22b5908b7fc7d1b663c4b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40258 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-01src: Remove unused 'include <cpu/x86/cache.h>'Elyes HAOUAS
Change-Id: I2bf1eb87bb5476dd77b5a56dfe8846e82d414523 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40666 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-01mb/google/dedede: add new variant for wheeliePeichao Wang
Add initial support for wheelie variant board. BUG=b:154664137 BRANCH=None TEST=build Change-Id: Id638e987f45c247dae824f221a38ccf32626572f Signed-off-by: peichao.wang <peichao.wang@bitland.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40587 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-05-01mb/google/nightfury: Tune the usb2_port[0] strengthSeunghwan Kim
Update usb2 port strength parameter for usb2_port[0] to improve SI. BUG=b:154668734 BRANCH=firmware-hatch-12672.B TEST=Built and checked SI margin of USB2 ports Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Change-Id: I8b4b58a67dc0835a677770a2968e8d8d61e0374f Reviewed-on: https://review.coreboot.org/c/coreboot/+/40622 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-05-01soc/intel/jasperlake: Add support to generate ACPI GPIO operationsKarthikeyan Ramasubramanian
Add support to generate ACPI operations to get/set/clear RX/TX GPIOs. BUG=b:152936541 TEST=Build and boot the mainboard. Ensure that there are no errors in the coreboot logs regarding unsupported ACPI GPIO operations. Change-Id: Ibc4846fbd9baf4f22c48c82acefed960669ed7d4 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40536 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-05-01mb/ocp/tiogapass: Update UPD IIO bifurcation at run-timeJohnny Lin
Update UPD IIO bifurcation at run-time according to different Riser cards. For detail please reference Facebook Server Intel Motherboard v4.0, Sec. 10.1.2 Riser card types. With the engineering build FSP, it can only configure IIO for one socket so my local test needs to remove all socket1 elements from tp_iio_bifur_table. This change relies on [1] and need to add GPP_C15 and GPP_C16 to early_gpio_table for gpio configuration in bootblock. [1] https://review.coreboot.org/c/coreboot/+/39427/ Tested=OCP Tioga Pass can see socket0 IIO being updated with an engineering build FSP. Change-Id: I8e63a233a2235cd45b14b20542e6efab3de17899 Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39895 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
2020-04-30mb/cedarisland_crb: rework GPIOs configuration using macrosMaxim Polyakov
This format of PCH GPIOs configuration, unlike the raw DW0 and DW1 registers values from the inteltool dump, is more understandable and makes the code much cleaner. The gpio.h file with PAD_CFG macros was automatically generated using the util/intelp2m [1] utility: ./intelp2m -p lbg -file cedarisland/vendorbios/inteltool_gpio.log According to the documentation [2], the Host Software Pad Ownership register only affects the pads that are configured as input. The intelp2m utility takes this into account when converting macros and ignores bits from this register for the corresponding pads. [1] https://review.coreboot.org/c/coreboot/+/35643 [2] Intel Document Number: 549921 Change-Id: Id671a9021a8313d8c3359b89c2934b929bcab1a4 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40736 Reviewed-by: Andrey Petrov <andrey.petrov@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-30mb/cedarisland_crb: exclude GPIOs reconfiguration by FSP-MMaxim Polyakov
We should be sure that after romstage the pads will be configured according to the config from gpio.h only. This patch sets the GPIO configuration from gpio.h using the soc/intel/common/gpio.c driver again in ramstage. [1] https://review.coreboot.org/c/coreboot/+/40730 Change-Id: Ic49e504d96fe4fd44434e7b981f8d8d9e76880ef Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40735 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Andrey Petrov <andrey.petrov@gmail.com>
2020-04-30mb/intel/cedarisland_crb: use common driver to configure GPIOMaxim Polyakov
According to changes in the soc/xeon_sp code [1,2], server motherboards with Lewisburg PCH can use the soc/intel/common/gpio driver to configure GPIO controller. This patch adds pads configuration map, which has the format required by the GPIO driver. The data for this was taken from the inteltool register dump with vendors firmware. The gpio.h file with pad configuration was generated automatically using the util/intelp2m [3]: ./intelp2m -raw -p lbg -file cedarisland/vendorbios/inteltool_gpio.log [1] https: //review.coreboot.org/c/coreboot/+/39425 [2] https: //review.coreboot.org/c/coreboot/+/39428 [3] https: //review.coreboot.org/c/coreboot/+/35643 Change-Id: I90b91e6dbf8c65c747d0e0d94c61023e610f93ab Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40734 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Andrey Petrov <andrey.petrov@gmail.com>
2020-04-30mb/amd/padmelon: Remove PS/2 keyboard driver selectionPaul Menzel
Most payloads, like GRUB, SeaBIOS and Linux, are able to initialize the PS/2 keyboard themselves, so coreboot does not need to initialize it. Therefore, this option should not be hard-coded for the mainboard, and be left for the user to select. Change-Id: Ibfb7efa22c525e60399afc198af6632330faaac3 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40752 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-04-30mb/pcengines/apu1: Remove PS/2 keyboard driver configurationPaul Menzel
Since commit 6aa8c5bc (drivers/pc80: Do not initialize PS2 keyboard by default), the Kconfig option `DRIVERS_PS2_KEYBOARD` already defaults to `n`. So, remove it here, as this option should be user selectable anyway depending on the payload. Change-Id: I3d08fb6bbb3e9d53fd2fed96f26679e8b1e73f8c Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40751 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2020-04-30mb/purism/librem_bdw: Remove PS/2 keyboard driver selectionPaul Menzel
Most payloads, like GRUB, SeaBIOS and Linux, are able to initialize the PS/2 keyboard themselves, so coreboot does not need to initialize it. Therefore, this option should not be hard-coded for the mainboard, and be left for the user to select. Change-Id: Iac835d2e7a3232f8e5c76f10984ae3f172f9c0ca Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40750 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-04-30soc/amd/picasso: Add support for em100Furquan Shaikh
This change enables support for em100 for Picasso platform. Since em100 requires lower SPI speed, this change configures speed in all modes as 16MHz. BUG=b:147758054,b:153675510 BRANCH=trembyle-bringup TEST=Verified that em100 works fine on trembyle. Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: Ib5ea1fe094fda9b8dba63e94b37e61791629564f Reviewed-on: https://review.coreboot.org/c/coreboot/+/40825 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-30soc/amd/picasso: Allow mainboard to configure SPI settingsFurquan Shaikh
This change adds options to allow mainboard to configure SPI speed for different modes as well as the SPI read mode. BUG=b:153675510,b:147758054 BRANCH=trembyle-bringup TEST=Verified that SPI settings are configured correctly for trembyle. Change-Id: I24c27ec39101c7c07bedc27056f690cf2cc54951 Signed-off-by: Furquan Shaikh <furquan@google.com> Signed-off-by: Rob Barnes <robbarnes@google.com> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40421 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-30soc/amd/picasso: Move SPI init calls into sb_spi_init()Furquan Shaikh
This change adds a helper sb_spi_init() that makes all the required calls for configuring SPI to ROM. BUG=b:147758054,b:153675510 BRANCH=trembyle-bringup TEST=Verified that SPI configuration is correct for trembyle. Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: Ic5b395a8d3bdab449c24b05d1b6b8777e128b5e0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40824 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-30soc/amd/picasso: Introduce enums for SPI read mode and speedFurquan Shaikh
This change adds enums for spi_read_mode and spi100_speed in preparation for adding these to chip.h in follow-up CLs. This makes it easier to reference what the mainboard is expected to set for these SPI configs. BUG=b:147758054,b:153675510 BRANCH=trembyle-bringup TEST=Verified that SPI configuration is correct for trembyle. Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I7f9778b41bd059a50f20993415ebd8702a1ad58e Reviewed-on: https://review.coreboot.org/c/coreboot/+/40823 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-30soc/amd/picasso: Get rid of chip.h inclusion from southbridge.hFurquan Shaikh
southbridge.h does not really need chip.h. So, this change removes the inclusion of chip.h from it. Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I09c87b975ecd5f7798da8dd858be0c729aef42de Reviewed-on: https://review.coreboot.org/c/coreboot/+/40822 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-30soc/amd/common/block/smbus: Include acpimmio_map.h in sm.cFurquan Shaikh
sm.c requires acpimmio_map.h for ACPIMMIO_* macros. This change includes acpimmio_map.h in sm.c Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: Ia049254fa389a76bcf6538c0449229b4d856086e Reviewed-on: https://review.coreboot.org/c/coreboot/+/40821 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-30Revert "soc/mediatek/mt8183: Force retraining memory if requested"Julius Werner
This reverts commit 285975dbba8c7f3bbb9f9950e79a30bb983d5123. Reason for revert: VB2_RECOVERY_TRAIN_AND_REBOOT was never meant to have any special effect on memory training behavior. It was just supposed to be a "reboot automatically after reaching kernel verification" recovery reason. On x86 devices this was used to prime the separate recovery MRC cache in the factory (make sure it is initialized before shipping). This isn't used on Kukui anyway, but in order to make sure nobody copies this code and keep the behavior consistent between platforms, let's remove it. Change-Id: I5df5e00526e90cb573131de3c8bac9f85f4e3a5f Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40623 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-30mb/ocp/tiogapass: Implement port 80h direct to GPIO and init UART pinsBryantOu
Enable aspeed's function that port 80h direct to GPIO for LED display, refer to section 9.4 Port 80h Direct to GPIO Guide of aspeed's Application Design Guide, also configure GPIO to UART for output serial console messages. Tested=Check if port 80h LED debug card can display POST codes at early stage, and serial console can see the related messages. Change-Id: I087d5a81b881533b4550c193e4e9720a134fb8e7 Signed-off-by: BryantOu <Bryant.Ou.Q@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40481 Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-by: Andrey Petrov <andrey.petrov@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-30mb/google/voteer: Enable DevSlp for SATA port1Wonkyu Kim
BUG=b:152893285 BRANCH=none TEST=Build and boot to OS volteer with Intel SATA and reboot from OS console Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: Ibed8f8c445bf2ac2290ffb670d8dfb83fc960438 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40584 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-04-30mb/google/volteer: Create trondo variantDavid Wu
Create the trondo variant of the volteer reference board by copying the template files to a new directory named for the variant. BUG=b:154678884 BRANCH=None TEST=util/abuild/abuild -p none -t google/volteer -x -a make sure the build includes GOOGLE_TRONDO Change-Id: Ie4f9bfe4798e14f91c6cb439f5c5ab2b9ea52b51 Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40686 Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-30mb/google/puff: update USB2 strengthTim Chen
Based on USB SI report to fine tune the strength for USB2 port0. BRANCH=none BUG=b:153590143 TEST=build and test USB2 port0 function works fine. Change-Id: I070c9e1c8153a680fb8f827889738a764d7ea9f4 Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40482 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2020-04-30sc7180: Increase SPI flash frequency to 37.5MHzJulius Werner
It seems that all SC7180 boards we have can well handle 37.5MHz of SPI flash speed, so bump that up from the current 25MHz so that we don't leave boot speed on the table. (The next step would be 50MHz which currently doesn't work on all boards so we're not going there yet.) BUG=b:117440651 Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: Id6e98fcbc89f5f3bfa408c7e8bbc90b4c92ceeea Reviewed-on: https://review.coreboot.org/c/coreboot/+/40874 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philip Chen <philipchen@google.com>
2020-04-29soc/intel/tigerlake: Check SPD is not NULL before printEric Lai
Check SPD is not NULL before print. This can prevent the system from hanging up. BUG=b:154445630 TEST=Check NULL SPD is not print. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Iccd9fce99eda7ae2b8fb1b4f3c2e635c2a428f04 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40560 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-29nb/intel/haswell/pei_data.h: Add ULT system typeAngel Pons
Looks like 5 is a valid system type, as Google Beltino and Slippy are using it. According to comments on these mainboards' code, this value corresponds to ULT systems. So, add it to the comment on the pei_data struct, which was likely copied from Sandy Bridge and was not updated. Change-Id: I3654bb6022839dba3e1499cf43e8beaa97d1def1 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40692 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2020-04-29soc/amd/picasso: Enable secure debug unlock conditionallyFurquan Shaikh
This change adds a Kconfig option PSP_UNLOCK_SECURE_DEBUG which when enabled includes secure debug unlock blobs and sets the required softfuses and options for amdfwtool. By default this is set to 'N'. BUG=b:154880818 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I47d8af67989b06242d662c77b7d9db97f624edd5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40683 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-04-29device/pci_id: Add Tiger Lake TCSS device IDJohn Zhao
Add Tiger Lake TCSS USB xHCI, xDCI and Thunderbolt DMA device ID. BUG=None TEST=Built and booted image sucessfully. Change-Id: Idef3850666c9f393181e0a13974b9ad79ba258ad Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40693 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2020-04-29mb/intel/tigerlake: Include TCSS power managementJohn Zhao
Include TCSS RTD3 into ACPI DSDT table. BUG=b:140290596 TEST=Booted to kernel and verified tcss xhci/pcierp/dma power state D3 entry/exit. Change-Id: I8cc5cfb572e15121059eb1fba41f931c59afbdf6 Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40615 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-04-29mb/google/volteer: Include TCSS power managementJohn Zhao
Include TCSS RTD3 into ACPI DSDT table. BUG=b:140290596 TEST=Booted to kernel and verified tcss xhci/pcierp/dma power state D3 entry/exit. Change-Id: Iae31a29eb23f7370737d097dd401f4056b8b7052 Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40616 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-04-29mb/google/octopus/variants/garg: update Garfour SKU IDTony Huang
SKUID: 49 - Garfour EVT (touch, TypeA DB) 50 - Garfour EVT (non-touch, HDMI DB) BUG=b:152861752 BRANCH=octopus TEST=emerge-octopus coreboot chromeos-bootimage Change-Id: I656a2bb2404efded6da6697664748b6c8d2ca4e0 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40586 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Marco Chen <marcochen@google.com>
2020-04-29superio/aspeed/common: Add early configure functionsBryantOu
Add LPC read/write functions for access aspeed's memory, also create config data table to config memory and SIO. These functions are used at early stages to configure devices. Signed-off-by: Bryant Ou <Bryant.Ou.Q@gmail.com> Change-Id: Ib59c29a042b2c7bf196b8a5bd5218704d8075855 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40483 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-29soc/amd/picasso: Use a helper to set bits in PSP_SOFTFUSEFurquan Shaikh
This change updates Makefile.inc to use a helper function set-bit to set a bit for the soft fuses. It gets rid of the different checks that were done to set soft fuses to magic values in different places. This is still not the best way to handle the fuses and instead this logic should be embedded within the amdfwtool by making it aware of specific platforms. But until that happens, we want to avoid having to add PSP_SOFTFUSE setting in various places with different values. BUG=b:154880818 TEST=Verified that the softfuse values are same with and without this change. Change-Id: I73887eb9c56ca5bb1c08d298fa818d698da1080b Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40700 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-29soc/amd/picasso: Drop prompts from some Kconfig optionsFurquan Shaikh
Some of the PSP Kconfig options that are prompted to the user should really be selected by mainboard. This change updates such options to not make them user-visible any more. BUG=b:154880818 Change-Id: Iaff02fb1e720e0562b740799593322e59b022212 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40699 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-04-29soc/amd/picasso: Fix comment about SMU firmware2 typeFurquan Shaikh
SMU firmware2 has type 0x12 i.e. decimal 18 and not 0x18. This change updates the comment for SMU firmware2 type. Change-Id: Ia2e35aff3e460a3423f90d6ecdbe2362331391f3 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40698 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-04-29soc/amd/picasso: Drop addition of PSPTRUSTLETS_FILEFurquan Shaikh
PSPTRUSTLETS_FILE was including a binary for fTPM which according to BIOS architecture design guide is the firmware enabled TPM. Chrome OS does not really use firmware enabled TPM. Also, this is an option which is mainboard dependent. This change drops the addition of PSPTRUSTLETS_FILE to PSP directory. If this is something that is required by any mainboard, there should be a separate Kconfig to include the required files. BUG=b:154880818 TEST=Verified that trembyle still boots Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: Iaa2126c879986d00c921c85fb5cb5257c7065006 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40685 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-04-29soc/amd/picasso: Drop unused OPT_PSPNVRAM_FILEFurquan Shaikh
This change drops unused option OPT_PSPNVRAM_FILE from picasso Makefile. BUG=b:154880818 TEST=Verified that trembyle still boots to OS. Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I64b328a92f5ee76e198a2ad3ec72d2cc4aeb9e91 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40684 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-29soc/amd/picasso: Drop addition of PUBSIGNEDKEY_FILEFurquan Shaikh
This change drops the addition of PUBSIGNEDKEY_FILE to PSP directory. This file is used to add OEM key for BIOS, however this is currently unused for upcoming zork board. In the future, if any mainboard needs this, it can be added based on some Kconfig selection. BUG=b:154880818 TEST=Verified that trembyle still boots up fine. Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: Icd97856a94a100898678702d99bbe29b82956004 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40682 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-29soc/amd/picasso: Disable inclusion of S0i3 firmware by defaultFurquan Shaikh
Enabling of S0i3 is a mainboard decision. This change sets the option to include S0i3 firmware by default to 'n'. BUG=b:154880818 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I5d533e317535b01efe9dd32272483296bf4fafab Reviewed-on: https://review.coreboot.org/c/coreboot/+/40681 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-29soc/amd/picasso: Disable MP2 FW inclusion by defaultFurquan Shaikh
Inclusion of MP2 firmware is optional and dependent on mainboard. Set default option for including MP2 firmware in PSP directory to 'n'. BUG=b:154880818 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I1ff7527a409d8ac7f4d30e69eafc53975b63e49b Reviewed-on: https://review.coreboot.org/c/coreboot/+/40680 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-04-29soc/amd/hda: Move HDA PCI device from DSDT to SSDTFurquan Shaikh
This change adds support in common block HDA driver to add a PCI device for HDA in SSDT and removes the HDA device from DSDT for Stoneyridge and Picasso. _INI method is still retained in stoneyridge since I am unsure why it was added. In order to support the _INI method, HDA driver makes a callback hda_soc_ssdt_quirks() to allow SoCs to add any quirks required for the HDA device. This callback is implemented by Stoneyridge to provide the _INI method which retains the same functionality for HDA device. This makes it easier to ensure that we don't accidentally make the DSDT and SSDT entries inconsistent w.r.t. ACPI name and scope. BUG=b:153858769,b:155132752 TEST=Verified that audio still works fine on Trembyle. Change-Id: I89dc46b92fdcb785bd37e18f0456935c0e57eff5 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40785 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-29arch/x86/acpigen: Constify fieldlist parameter to acpigen_write_fieldFurquan Shaikh
acpigen_write_field() does not need to modify the fieldlist parameter. Thus, this change makes this parameter as const. Change-Id: I94688913cee8948f42ae5e184f2d24264876648d Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40784 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-29arch/x86/acpigen: Add helpers for Store() and If (Lequal (...))Furquan Shaikh
This change adds the following acpigen helpers: a. acpigen_write_store_op_to_namestr: This generates ACPI code for storing an ACPI OP to name string b. acpigen_write_if_lequal_namestr_int: This generates ACPI code for checking if operand1 and operand2 are equal where operand1 is namestring and operand2 is an integer. Change-Id: I84c158361c0725c2927f06be35391e61f627a453 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40783 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-29soc/amd/picasso: Drop _INI method and OperationRegion for AZHD deviceFurquan Shaikh
_INI method for AZHD device for Picasso family was just copied from Stoneyridge as part of initial change. There is no evidence that this is required for Picasso. Also, removing the _INI method works perfectly fine. Thus, this change drops the _INI method for AZHD device on Picasso. Since the _INI method was the only entity using the OperationRegion fields, this change also drops the operation region. BUG=b:155132752 TEST=Verified that audio still works on Trembyle Change-Id: If42abf91ee5cd47a881b0a3b4ca1916ea5169261 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40782 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-29soc/amd/hda: Add .acpi_name() callback to HDA driverFurquan Shaikh
This change adds .acpi_name() callback to HDA driver that returns "AZHD" as the ACPI device name for HDA controller. Since this is now done by the common HDA driver, this change also removes the HDA device name returned by stoneyridge in chip.c. BUG=b:153858769 Change-Id: I89eaa799518572f3c46c7ce9ef8dd3f85daa12bb Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40781 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-29soc/amd/common/block/hda: Use tabs instead of spaces in hda.cFurquan Shaikh
This is a cosmetic change to use tabs to align hda_audio_ops and hdaaudio_driver entries. Change-Id: I8e398706cbe7087d0178b2433606f8984651c0d6 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40780 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-29soc/amd/common/block/hda: Use default pci_dev_ops_pciFurquan Shaikh
This change sets ops_pci for hda_audio_ops to default pci_dev_ops_pci and removes the custom lops_pci since the driver does not really need a custom ops_pci. BUG=b:153858769 Change-Id: I4b46e22ef556c0f49152c41a07f3c54c513ae37a Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40779 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-29soc/amd/common/block/hda: Drop PCI_DEVICE_ID_AMD_FAM17H_HDA0Furquan Shaikh
PCI device PCI_DEVICE_ID_AMD_FAM17H_HDA0 does not really use the same vendor ID as PCI_VENDOR_ID_AMD. Thus, drop this device from the list of pci_device_ids[] that are supported by the common hda driver. BUG=b:153858769 Change-Id: If41dc7179e1e5b476878ee24c8a355b1cde762eb Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40778 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-29mb/google/hatch/romstage_spd_smbus.c: Fix missing DIMM issueEdward O'Callaghan
Since `commit 0ee9b14c09c` the SPD array is set to NULL if no DIMM is present. This causes failure due to an unconditional use of `blk.spd_array[i]`, : i={0,1}. This validates the spd_array is non-NULL before use otherwise it sets the DIMM as not present. Puff fails boot with the following log: ``` ... SPD: banks 16, ranks 2, rows 16, columns 10, density 8192 Mb SPD: device width 8 bits, bus width 64 bits SPD: module size is 16384 MB (per channel) ASSERTION ERROR: file 'src/soc/intel/cannonlake/cnl_memcfg_init.c', line 47 ``` BUG=b:155220125 BRANCH=none TEST=none Change-Id: I5f47c849344951d53fa8c67e779b7c46d632d124 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40820 Reviewed-by: Jamie Chen <jamie.chen@intel.com> Reviewed-by: Sam McNally <sammc@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Daniel Kurtz <djkurtz@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-29soc/amd/picasso: Add bootblock supportFelix Held
The original plan for Picasso was to combine the features of bootblock with romstage due to its unique way of coming out of reset. Early in development, all bootblock support was removed from the directory. All Picasso designs will now use a bootblock as their first stage. The reason being that it requires less invasive changes than using a hybrid romstage. Add a basic bootblock back to the directory, and compatible with the design of lib/bootblock.c. The files support RESET_VECTOR_IN_RAM and add appropriate settings in Kconfig. Make Makefile.inc calculates the size and base of bootblock from known parameters. * Future work may attempt to streamline this further, in conjunction with changes in amdfwtool. See b/154957411. BUG=b:147042464, b:153675909 Change-Id: I1d0784025f2b39f140b16f37726d4a7f36df6c6c Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37490 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-29arch/x86: Implement RESET_VECTOR_IN_RAMFelix Held
Add support for devices with the reset vector pointing into DRAM. This is a specific implementation that assumes a paradigm of AMD Family 17h (a.k.a. "Zen"). Until the first ljmpl for protected mode, the core's state appears to software like other designs, and then the actual physical addressing becomes recognizable. These systems cannot implement cache-as-RAM as in more traditional x86 products. Therefore instead of reusing CAR names and variables, a substitute called "earlyram" is introduced. This change makes adjustments to CAR-aware files accordingly. Enable NO_XIP_EARLY_STAGES. The first stage is already in DRAM, and running subsequent stages as XIP in the boot device would reduce performance. Finally, add a new early_ram.ld linker file. Because all stages run in DRAM, they can be linked with their .data and .bss as normal, i.e. they don't need to rely on storage available only at a fixed location like CAR systems. The primary purpose of the early_ram.ld is to provide consistent locations for PRERAM_CBMEM_CONSOLE, TIMESTAMP regions, etc. across stages until cbmem is brought online. BUG=b:147042464 TEST=Build for trembyle, and boot to ramstage. $ objdump -h cbfs/fallback/bootblock.debug Idx ,Name ,Size ,VMA ,LMA ,File off Algn 0 ,.text ,000074d0 ,08076000 ,08076000 ,00001000 2**12 1 ,.data ,00000038 ,0807d4d0 ,0807d4d0 ,000084d0 2**2 2 ,.bss ,00000048 ,0807d508 ,0807d508 ,00008508 2**2 3 ,.stack ,00000800 ,0807daf0 ,0807daf0 ,00000000 2**0 4 ,.persistent ,00001cfa ,0807e2f0 ,0807e2f0 ,00000000 2**0 5 ,.reset ,00000010 ,0807fff0 ,0807fff0 ,0000aff0 2**0 6 ,.debug_info ,0002659c ,00000000 ,00000000 ,0000b000 2**0 7 ,.debug_abbrev ,000074a2 ,00000000 ,00000000 ,0003159c 2**0 8 ,.debug_aranges,00000dd0 ,00000000 ,00000000 ,00038a40 2**3 9 ,.debug_line ,0000ad65 ,00000000 ,00000000 ,00039810 2**0 10 ,.debug_str ,00009655 ,00000000 ,00000000 ,00044575 2**0 11 ,.debug_loc ,0000b7ce ,00000000 ,00000000 ,0004dbca 2**0 12 ,.debug_ranges ,000029c0 ,00000000 ,00000000 ,00059398 2**3 Change-Id: I9c084ff6fdcf7e9154436f038705e8679daea780 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35035 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-29src/cpu/x86/mtrr/earlymtrr: Add clear_all_var_mtrrRaul E Rangel
Picasso does not define the state of variable MTRRs on boot. Add a helper function to clear all MTRRs. BUG=b:147042464 TEST=Build trembyle Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I21b887ce12849a95ddd8f1698028fb6bbfb4a7f6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40764 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-29cpu/x86/16bit/entry16.inc: Fix typos in commentRaul E Rangel
Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I89d4d9d3a4a8a7545921dabb50f33035a090ecda Reviewed-on: https://review.coreboot.org/c/coreboot/+/40696 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-29mb/google/volteer: Work around TPM issue by enabling GPIO PM in S0ixVenkata Krishna Nimmagadda
Setting the default values for GPIO community power management, causes issues in detecting TPM interrupts. So to avoid that GPIO PM has to be disabled in devicetree. But for S0ix it is needed. This patch implements a workaround in ASL code to enable GPIO PM on S0ix entry and disable it on S0ix exit. This patch adds the following three platform specific methods. 1. MS0X to enable power management features for GPIO communities on entry and on exit, it disables them. 2. MPTS to enable power management features for GPIO communities when preparing to sleep. 3. MWAK to disable power management features for GPIO communities on waking up. BUG=b:148892882 BRANCH=none TEST="Boot with this change on volteer proto1 and check for GPIO community config with debugger" Signed-off-by: Venkata Krishna Nimmagadda <venkata.krishna.nimmagadda@intel.com> Change-Id: If522c82c0069a4bf5738beb73a2b4f11ed6f51d3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40261 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Venkata Krishna Nimmagadda <Venkata.krishna.nimmagadda@intel.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-29soc/intel/tigerlake: Add method to look up GPIO com ID for an indexVenkata Krishna Nimmagadda
This patch adds GPID, a helper method to look up GPIO community ID for an index. This patch also includes Intel's common GPIO ASL code. CGPM method in the common code uses the GPID method introduced in this patch. BUG=b:148892882 BRANCH=none TEST="BUILD volteer and ripto" Signed-off-by: Venkata Krishna Nimmagadda <venkata.krishna.nimmagadda@intel.com> Change-Id: Id6a00fb8adef0285d6bbc35cd5a44539bd3be6b8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40478 Reviewed-by: Venkata Krishna Nimmagadda <Venkata.krishna.nimmagadda@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-29soc/intel/common: Add method to modify GPIO community PM configVenkata Krishna Nimmagadda
This patch adds CGPM, a helper method to configure GPIO power management bits that are part of miscellaneous config. This is needed for configuration of these bits on S0ix entry and exit. BUG=b:148892882 BRANCH=none TEST="BUILD volteer and ripto" Signed-off-by: Venkata Krishna Nimmagadda <venkata.krishna.nimmagadda@intel.com> Change-Id: Iac3a269d3071eb5d4100d516249eeb5ce23c02fa Reviewed-on: https://review.coreboot.org/c/coreboot/+/40260 Reviewed-by: Venkata Krishna Nimmagadda <Venkata.krishna.nimmagadda@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-28soc/amd/common/block/sata: Add missing .ops_pci memberFurquan Shaikh
This change sets .ops_pci for sata device_operations to default pci_dev_ops_pci. It is required to set the subsystem IDs making the behavior consistent with default_pci_ops_dev. BUG=b:153858769 Change-Id: I695ac8961c92a3061beca890f5d47413b251e22b Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40777 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-28soc/amd/picasso: Use AMD common SATA driverFurquan Shaikh
This change enables the use of AMD common block SATA driver for Picasso. Since the common driver provides ACPI device name and PCI device for SATA in SSDT, these are removed from picasso chip.c and sb_pci0_fch.asl. BUG=b:153858769 TEST=Verified that "STCR" device is correctly reported on trembyle in SSDT. Change-Id: Icfdcf9f5e08820b565aa9fcdd0cdc7b5c9eadcd5 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40770 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-02 08:01:25 +0000