| Age | Commit message (Collapse) | Author |
|---|
|
Most AMD hardware requires at minimum two warm resets
when booting from S5 (power off). This is uncomfortably
close to the maximum bootblock execution count, and has resulted
in unstable normal/fallback operation on some machines.
Increase the default max bootblock execution count before fallback
to 6. This translates to roughly 2 - 3 failed boots before fallback
mode will engage, with an absolute worst case of pushing the reset
button 5 times to engage fallback mode in the absence of a dedicated
recovery jumper.
Change-Id: I1911f1b77f168835b516e6a915d5b6949f47219a
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12317
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Add a DMAR table to advertise IOMMU and IRQ remapping capabilities to
the OS.
Tested with kontron/ktqm77. Under Linux, the table is detected and
interrupt remapping is enabled automatically.
Change-Id: Id6ee601a0a8543ed09c6bb8d308a3a3549fc34e5
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/12195
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@google.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Sandy Bridge and Ivy Bridge processors have two IOMMU units. One for the
integrated graphics controller and one for all other PCI devices. Assign
resources for both IOMMUs and apply some quirks.
Tested with kontron/ktqm77 and a Muen based system that makes use of the
IOMMUs. Not tested on Sandy Bridge, but register dumps show the same
settings that are applied here.
Change-Id: I43b5e20b750e7529f448acac35de173185678fd9
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/12194
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@google.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Assign unique bus/dev/fn values for the I/O APIC and each HPET. The
values are taken from an example DMAR table. They are used as source-id
for MSI requests and as completer-id for reads from the device' MMIO
space [1, 2]. The former is usefull for source-id verfication during
interrupt remapping.
[1] Intel 6 Series Chipset and Intel C200 Series Chipset
Datasheet
Document-Number: 324645
[2] Intel 7 Series / C216 Chipset Family Platform Controller Hub (PCH)
Datasheet
Document-Number: 326776
Change-Id: Ib46f8cfb7d966dd1cf2b026f671bc45ffcc43d25
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/12193
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@google.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
On server boards with a recovery jumper, having the fallback path
less sensitive to power fluctuations or BMC issues makes sense.
Increase the maximum number of boot attempts before automatic
fallback to 10 on these boards.
Change-Id: Iabe0b0cbf332686db8e9380a8b65a1477173599c
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12320
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Refactor acpi_create_dmar_drhd_ds_pci() and add similar functions for
I/O-APICs and MSI capable HPETs. We violate the spec [1] here, which
talks about 16-bit source-ids spread over start_bus and path entries.
Intel actually uses bus/dev/fn identification for those devices too,
and so do we.
[1] Intel Virtualization Technology for Directed I/O
Architecture Specification
Document-Number: D51397
Change-Id: I0fce075961762610d44b5552b71e010511871fc2
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/12192
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@google.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Add a parameter to acpi_create_dmar() for the flags field and define
flags given by the spec [1].
[1] Intel Virtualization Technology for Directed I/O
Architecture Specification
Document-Number: D51397
Change-Id: I03ae32f13bb0061bd3b9bef607db175d9b0bc5e1
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/12191
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@google.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
All boards using this SuperIO have been removed from the tree already.
Change-Id: I52847bc2fc16b27ac0de0bc7c847221b1e5cb744
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/12245
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Fix a function call in the normal path using the original function
name and arguments in code that was changed in commit 3bfd7cc6
(drivers/pc80: Rework normal / fallback selector code)
This commit reworked most of the fallback / normal code,
however the normal code paths were not fully tested by Jenkins,
so this was missed.
Change-Id: Ied66334977272a13b7a7307ff4d9f34eb22040aa
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12315
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins)
|
|
Per IRC and Gerrit discussion, the normal / fallback
selector code is a rather weak spot in coreboot, and
did not function correctly for certain use cases.
Rework the selector to more clearly indicate proper
operation, and also remove dead code. Also tentatively
abandon use of RTC bit 385; a follow-up patch will
remove said bit from all affected mainboards.
The correct operation of the fallback code selector
approximates that of a power line recloser, with
a user option to attempt normal boot that can be
cleared by firmware, but never set by firmware.
Additionally, if cleared by user, the fallback
path should always be used on the next reboot.
Change-Id: I753ae9f0710c524875a85354ac2547df0c305569
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12289
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
The K8 PowerNow! state generator does not generate _PSS objects
for nodes other than the first CPU package. This patch backports
the PowerNow! core count fixes for Family 10h to the K8 CPUs.
Change-Id: I7b411ab75155dfb4bf51ae04301aa16fb2ae89f3
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12286
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Change-Id: I0180e0ae2aeeffcef46a97892356f1955f581efd
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/12295
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
In order to not expose the cbmem data structures to userland
that are used by coreboot internally add each of the cbmem
entries to a coreboot table record. The payload ABI uses
coreboot tables so this just provides a shortcut for cbmem
entries which were manually added previously by doing the
work on behalf of all entries.
A cursor structure and associated functions are added to
the imd code for walking the entries in order to be placed
in the coreboot tables. Additionally a struct lb_cbmem_entry
is added that lists the base address, size, and id of the
cbmem entry.
BUG=chrome-os-partner:43731
BRANCH=None
TEST=Booted glados. View coreboot table entries with cbmem.
Change-Id: I125940aa1898c3e99077ead0660eff8aa905b13b
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11757
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
TEST: Booted ASUS KGPE-D16 with single Opteron 6380
* Unbuffered DDR3 DIMMs tested and working
* Suspend to RAM (S3) tested and working
Change-Id: Idffd2ce36ce183fbfa087e5ba69a9148f084b45e
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/11966
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I07e517f239807cbe76037308f0beff80c9a6f2ba
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12101
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I34501d3fc68b71db7781dad11d5b883868932a60
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/11965
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: Id7441dacef2e46e283d1fc99d5e5fa3f20e0d097
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/11959
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I21777283ce0fd3c607951204a63ff67dc656c8cc
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/11956
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I67a76cf0e4ebc33fbd7dd151bb68dce1fc6ba680
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/11957
Tested-by: build bot (Jenkins)
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Some comments and leftover static USB devices whose function
numbers changed.
Change-Id: I4d7c7499fe436588ef7e5ae030212c2638a4505f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/12263
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
To store memory configuration in SPI flash currently adds
some 150 ms delay in ramstage, visible in timestamps listing
at 75:cbmem post.
Change-Id: I1160259054b58e9a8df2a105c730e0f4140be1f5
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/12215
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Disables mouse ps2 data/clock signals, not connected in hardware.
Purpose of other GPIOs is not really known, but match them
with superiotool dump taken from vendor bios.
Change-Id: I7b549fbd7dd3fa4cbd507d76882b60bc324a4bd0
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/12214
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
While the actual pins behind these devices are not exposed on the chip,
the enable registers are implemented in hardware. Allow to turn these LDNs
off, like the vendor bios for asrock/e350m1 does.
Change-Id: I4d6d5a8de12b09095138cacbad62b2dfbbe54028
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/12213
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Several ramstage files were inadvertently using Family 10h-specfic
structures, causing unstable operation. Use the K8-specific
structures instead.
Change-Id: I64066dfdca83557393499b77726051e25b814381
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12290
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
This resolves a Kconfig warning.
Change-Id: Ic77c8bf89613c116dfdc73572709aeb354e33b2a
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12287
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I7da84b064287a445fd75a947e2f96ce1ae30d3de
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/11954
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I8ab7b2cd9bf36d53b744a11d32dd40c750149567
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12272
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The acpi_get_sleep_type function in SB700 ramstage is only needed
for boards / CPUs that require late CBMEM initialization.
Providing this function in early CBMEM-compatible boards breaks
building of the ACPI S3 code due to multiple definitions of
acpi_get_sleep_type.
Change-Id: Ieebc2640a586812e3e2bfd410987205d64147314
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12267
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
One of the interrupts in intel_vga_int15_handler lacks
positive return status. Write correct status to avoid
error messages in log.
TEST=With this change `int15 call returned error` is not shown anymore
on a custom board with Intel Atom CPU, i945GME northbridge and
i82801gx southbridge.
Change-Id: I740b2df9bd6a7d261d89bef74b924edbb64354aa
Signed-off-by: Konstantin Aladyshev <aladyshev@nicevt.ru>
Reviewed-on: http://review.coreboot.org/12255
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
It encourages users from writing to the FSF without giving an address.
Linux also prefers to drop that and their checkpatch.pl (that we
imported) looks out for that.
This is the result of util/scripts/no-fsf-addresses.sh with no further
editing.
Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11888
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
The existing KFSN4-DRE support hung during ramstage while initializing
AP #3 if a second CPU package was installed. After analyzing the
Sun Ultra 40 M2 support code it became apparent that the K8 code
cannot function correctly if sequential RAM training is disabled,
and that there were a few other missing calls. This patch adds
the missing calls, adjust the CAR space to an appropriate level, and
explicitly defines the link numbers and connections in devicetree.cb
TEST: Booted ASUS KFSN4-DRE with 2x Opteron 8222 installed.
Change-Id: I96178b7367b0c13de5c9d5d90d032fb0c53639c2
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12285
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I15375ac1247b7cc8d80d910a767c7f3e67eb8739
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11904
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Disable the parallel CPU initialization for model_206ax, that is Sandy
Bridge and Ivy Bridge processors. We never did it the way that Intel
recommends and it became unreliable with the introduction of SMM_MODULES
in commit a3e41c0 Migrate 206ax to SMM_MODULES.
Tested by booting kontron/ktqm77 2.6k times into Linux user space. No
issues so far.
Change-Id: Idffc352341419f22a36bf772534a5e11e711edf1
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/12266
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I66ef081fa1a520f0199366587800783ea1ef8719
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/11023
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
|
|
All boards using this SuperIO have been removed from the tree already.
Change-Id: I57eacf2a88077d0d0bffdcf44b3c2ecbd301e625
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/12242
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
All boards using this SuperIO have been removed from the tree already.
Change-Id: Ifca91ae44ab222371808ff1e0027a7cbd4646b0a
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/12243
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
All boards using this SuperIO have been removed from the tree already.
Change-Id: Ic5604c75de249b945dca58aa904edec86558d3ec
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/12241
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
All boards using this SuperIO have been removed already.
Change-Id: I667a8d15a2d16671115f62de656b1c5c6a8259b9
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/12240
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
All boards using this SuperIO have been removed from the tree.
Change-Id: I1d13ec7c5f27e82523612af7f07fca3176953600
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/12239
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
All mainboards using this southbridge have been removed from
the tree already.
Change-Id: I4398ef1e270bd0f36c5dd1c6ec3bfec6c2c091e6
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/12238
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
All boards using this southbridge have been removed from
the tree already.
Change-Id: I08269931d845d1f57b34174238bcce245ad77894
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/12237
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
All boards using it have been deleted a long time ago.
Change-Id: Ib1c4018ab6ec27868c0e2fdbf9c91323ead076fb
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/12236
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
On x86_64 we need to leave long mode before we can switch to 16bit
mode. Oh joy! When's my 64bit resume pointer coming?
Why didn't this get caught earlier? Seems the Asrock E350M2 didn't
do Suspend/Resume?
Yes, I know it's Intel syntax. Will be converted to AT&T syntax
as soon as the whole thing actually works.. 8)
Change-Id: Ic51869cf67d842041f8842cd9964d72a024c335f
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/11106
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
It's unused and empty.
Change-Id: Ieb9225083cb779b7b94ca47488dad4d7beb30a94
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/12235
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Change-Id: I35dab4e66514948aafa912d993fb8d42c5a520a0
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/11089
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Change-Id: I3df66320d0bc18221f947b47e7f09533daafabad
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/11108
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Change-Id: I0f3297dff47dfb44da034ac6f305dcf1981b9de1
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/11080
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
There are some inconsistencies in AMDs APIs between the coreboot
code and the vendorcode code. Unify the API.
UINTN maps to uintptr_t in UEFI land. Do the same
here. Also switch the other UEFI types to map to
fixed size types.
Change-Id: Ib46893c7cd5368eae43e9cda30eed7398867ac5b
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Signed-off-by: Scott Duplichan <scott@notabs.org>
Reviewed-on: http://review.coreboot.org/10601
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Change-Id: I6a0752cf0c0e484e670acca97c4991b5578845fb
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/11081
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Change-Id: I2a6cd7ad27cb6d16dfe3267ea6fb844a5e2e20c6
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/11083
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Change-Id: I5ea0f9338ccdd658b5fbec72aa35b4f80d63d4f9
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/11084
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Change-Id: Ib4b643441a5b887abf73cc55930ea9b01037f6ea
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/11085
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Change-Id: I326c070398c72a877054969d3a03e6e427edc304
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/11086
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Change-Id: Ic97567851fa40295bc21cefd7537407b99d71709
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/11952
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Change-Id: I169fafc3a61e11c3e4781190053e57bf34502d7b
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/11951
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Bring http://review.coreboot.org/#/c/10582/ to Hudson
Change-Id: I1ba3047699c304a769215fe901dc3511bf23199d
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/11022
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
This is extending http://review.coreboot.org/#/c/10583/
(29e6548) to the remaining AGESA northbridge drivers.
Change-Id: I6fa53b36a1420e92cb4aecb0f7b4c71541a94c71
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/11021
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Change-Id: I2b4338927d56a2075c0a95f2ab981f1beaf69cc7
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/11082
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
This mirrors a similar commit made to Family 10h support
in changeset 11966 file model_10xxx_init.c
TEST: Booted ASS KFSN4-DRE with 1x Opteron 8222
Change-Id: I760ef27be00aed11c0ac21b9bd741189f4b05834
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12250
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The existing Kconfig option for FIDVID was permanently
set to "no" due to Kconfig stopping at the first matching
value set when parsing the file. This patch moves the
conditional set above the unconditional set, resolving
the issue.
Change-Id: Ic19f68f6b17943f9133ff32a9b6538f0bf942eca
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12224
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Backport a handful of debugging routines and the extended APIC
initialization code from Family 10h support to K8 support.
Change-Id: I08cc5c8bc65635ce09a69e32940dd7edd8d3be87
TEST: Booted ASUS KFSN4-DRE with 1x Opteron 8222
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12251
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
The recommendation to set DisFillP during CAR initialization
on K8 NPT CPUs was ignored. The consequences of this are
largely unknown; fix up coreboot to follow the recommendations.
Change-Id: Ide512bbc1d9aa284179628e2aa598ef5475e8eeb
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12249
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
These two mainboards contained trivial mistakes related
to FIDVID that broke build when FIDVID was enabled.
Change-Id: Ie7bec77f26ec37eada21308984db4a9fd7a1866f
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12226
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Change-Id: I74c285ff86993898e0120170cf07f48ef4dc9612
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12225
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Change-Id: Ifdb1d1f267af289d962effe1150c7bc0a39cb5d2
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12233
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This is a clone of the original Family 10h-compatible ASUS
KFSN4-DRE board, modified for basic K8 support to allow for
future K8 Socket F Opteron testing.
TEST: Booted KFSN4-DRE with 1 Opteron 8222 processor
KNOWN ISSUES:
* Second CPU package fails to initialize AP
This prevents use of a secondary CPU package
* Second memory channel of at least CPU package #0
does not function (crash at CAR handoff)
Change-Id: I591725babe685fa50a0d7473b17005fbd258056e
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12212
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Change-Id: If1df7f3ae9661fae49557c07def397b36b1d38f0
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12210
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
This reverts commit 785b3eb6e8fcafb38395eec00f4f0fc0e906c7cc.
The commit re-tuned the upstream link again, it does not tune secondary side.
Change-Id: I9be70e95b06ceff99beba8a7c7eb6402b32fcca1
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/12253
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Peter Stuge <peter@stuge.se>
|
|
Previously if we tried to read the HDMI EDID several times and failed
each time then we're return from hdmi_read_edid() with no error. Then
we'd interpret whatever happened to be in memory at the time as an
EDID--not so great.
Let's actually look at the error.
BRANCH=none
BUG=chrome-os-partner:46256
TEST=Monitor that can't read EDID not shows that in the log
Change-Id: I6e64b13ae3f8c61bf1baaa1cfc8b24987bd75cf3
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 44bda7311f9ee677235e4dc8db669226518b3895
Original-Change-Id: I9089755b75118499bec37bdb96d1635f66252e65
Original-Signed-off-by: Douglas Anderson <dianders@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/309298
Original-Commit-Ready: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/12231
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I4f0f6c1cb1fad5b65f196dc6b443252a0ecc70a1
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/11947
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
There are cases where one region_device needs to be
accessed using offset/sizes from one address space
that need the offset translated into a different
address space for operations to take place. The
xlate_region_device provides an offset that is
subtracted from the incoming transaction before
deferring to the backing access region.
Change-Id: I41d43924bb6fbc7b4d3681877543209e1085e15c
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/12227
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Issue observed:
In a multi GPU setup (IGD and PEG) the system still uses the IGD.
CONFIG_ONBOARD_VGA_IS_PRIMARY has no effect on Sandy/Ivy Bridge.
Test system:
* Gigabyte GA-B75M-D3H
* Intel Pentium CPU G2130
* ATI Radeon HD4780
Problem description:
The GMA is missing a disable function.
Problem solution:
Add a GMA disable function. Deactivate PCI device until remaining multi
GPU issues are resolved. Do not claim VGA decode any more.
Final testing results:
The system is able to boot using the PEG device as primary VGA
device.
Change-Id: I52af32df41ca22f808b119f3a4099849c74068b3
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: http://review.coreboot.org/11919
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Add a comment explaining what `abcfg_reg(0xc0, 0x01FF, 0x0F4)` does.
This is a follow-up for commit 24501cae (AMD cimx/sb800: Initially
enable all GPP ports).
Change-Id: I5ac263ee088d36a7f7a2d03c1454ed647faa7147
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/12190
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This patch addresses changes requested to commit 85c39a4c
(southbridge/amd/sb700: Add Suspend to RAM (S3) support)
- remove unused/commented out code
- remove unnecessary guards around acpi_get_sleep_type()
Change-Id: I2878e038d2f9f8d182615e1f4a75ddce5c45d5f3
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/12206
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I2f1373905ffd6460ac3c7c21738e2e2a9aa2e463
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/11992
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: Ie4b74f6d63c323ca499a6890defe9b8afe83ea96
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12209
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I09d2449af9c1562f4f3d5af1e8764b82b6550007
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: http://review.coreboot.org/12223
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: I93534082d379369352e367c9c24b213513a543b2
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12211
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: I254e9e9e65519edcf4d3f1ecc385af16d18c2367
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12208
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This mitigates the Memory Sinkhole issue (described on
https://github.com/xoreaxeaxeax/sinkhole) by checking for the issue and
crashing the system explicitly if LAPIC overlaps ASEG.
This needs to happen without a data access (only code fetches) because
data accesses could be tampered with.
Don't try to recover because, if somebody tried to do shenanigans like
these, we have to expect more.
Sandybridge is safe because it does the same test in hardware, and
crashes. Newer chipsets presumably do the same.
This needs to be extended to deal with overlapping TSEG as well.
Change-Id: I508c0b10ab88779da81d18a94b08dcfeca6f5a6f
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/11519
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
While migrating from vboot1 to vboot2, the tpm_init was moved out of
vboot library and implemented in coreboot. However, while doing this,
the initial factory flow was missed.
We need to ensure following flow for tpm_init:
1. Perform tpm_init
2. If tpm_init fails, set secdata_context flag to indicate to vboot
that tpm needs reboot.
3. Call vb2_api_phase1
4. If vb2_api_phase1 returns error code saying boot into recovery,
continue booting into recovery. For all other error codes, save
context if required and reboot.
[pg: everything but step 2 was already done, so this upstream commit is
quite minimal]
CQ-DEPEND=CL:300572
BUG=chrome-os-partner:45462
BRANCH=None
TEST=Verified behavior on smaug. Steps to test:
1. Reboot into recovery
2. tpmc clear
3. Reboot device
Expected Behavior: Device should reboot after Enabling TPM. Should not
enter recovery
Confirmed that the device behaves as expected.
Change-Id: I72f08d583b744bd77accadd06958c61ade298dfb
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 85ac93137f3cfb28668dcfa18dfc773bf910d44e
Original-Change-Id: I38ab9b9d6c2a718ccc8641377508ffc93fef2ba1
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/300570
Original-Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Randall Spangler <rspangler@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/12205
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Change the tuning setting for the type-c port that is over
the flex cable to use the max possible drive strength.
Also fix up the comments to indicate what Type-c port goes
where instead of just referring to them by number.
BUG=chrome-os-partner:45367
BRANCH=none
TEST=build and boot on glados
Change-Id: Iebcffc9ab95d56289258017248c273090c88bb06
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 824ca87c4bf556d493dc8cdec561f37ab135cd2d
Original-Change-Id: I081623bbb1b0f39f1569b9f5cf7933abefe202b3
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/309010
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/12204
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Add a new USB2_PORT_MAX with the max possible settings
(56mV) for the TX and Pre-emphasis bias values. Also fix
the settings for the detachable tablet config to match the
skylake HSIO tuning guide as it was incorrect before.
BUG=chrome-os-partner:45367
BRANCH=none
TEST=build and boot on glados
Change-Id: Id9ccc683fe92c962095347e0d1a0afeb082c821f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e5d56831e75f98a3c75ed333e4b79b1a37f14792
Original-Change-Id: Ia2e3e93236f1463201f83a1cae28349de2836110
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/308729
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/12203
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
If we boot without a heatsink then DPTF may power off the system when
it starts if the CPU temp is >90C. Since TJmax is 100C set the
critical threshold to just below that value.
Also remove the active thresholds as chell does not have a fan.
This will have DPTF use the default values but without the DPTF active
policy it shouldn't get used.
BUG=chrome-os-partner:46694
BRANCH=none
TEST=build and boot on chell w/o a heatsink
Change-Id: Id9e8f2c547468db8ad0edaf6c362a9a9bb5b95a2
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 23d9117d5d7a4b44fc2298352eba133747f8e246
Original-Change-Id: Ib8e074098e3956efeed0f9b7f8b16652658db374
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/308728
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/12202
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This is based on kunimitsu with minor changes:
- update GPIOs based on schematic
- update SPD data for memory config
- disable ALS
BUG=None
TEST=emerge-lars coreboot
Change-Id: Id1c9edfe3cc665e90683344f1662de2e65caf766
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 3201aa573a77fcad3b6b1335d23eb4c2a09c1708
Original-Change-Id: Ifae446e4668569b6100b29bc1f52b0fea1df2952
Original-Signed-off-by: David Wu <David_Wu@quantatw.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/308283
Original-Commit-Ready: David Wu <david_wu@quantatw.com>
Original-Tested-by: David Wu <david_wu@quantatw.com>
Original-Reviewed-by: Bernie Thompson <bhthompson@chromium.org>
Original-Reviewed-by: Shawn N <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/12201
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: I95129e6f519735e236c9c13b16e21df25b9ea607
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/12200
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
vboot handoff should look at flags in struct vb2_shared_data when
translating flags to VBSD_BOOT_REC_SWITCH_ON because
VBSD_BOOT_REC_SWITCH_ON is supposed to indicate whether manual recovery was
triggered or not while vb2_sd->recovery_reason will be able to provide
that information only in some cases after CL:307586 is checked in.
For example, this fixes a recovery loop problem: Without this fix,
vb2_sd->recovery_reason won't be set to VB2_RECOVERY_RO_MANUAL when user
hits esc+refresh+power at 'broken' screen. In the next boot,
recovery_reason will be set to whatever reason which caused 'broken'
screen. So, if we check recovery_reason == VB2_RECOVERY_RO_MANUAL, we
won't set vb_sd->flags to VBSD_BOOT_REC_SWITCH_ON. That'll cause a
recovery loop because VbBootRecovery traps us again in the 'broken'
screen after not seeing VBSD_BOOT_REC_SWITCH_ON.
BUG=chromium:501060
BRANCH=tot
TEST=test_that -b veyron_jerry suite:faft_bios
Change-Id: I69a50c71d93ab311c1f7d4cfcd7d454ca1189586
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d9679b02f6d21ed903bb02e107badb0fbf7da46c
Original-Change-Id: I3da642ff2d05c097d10db303fc8ab3358e10a5c7
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/307946
Original-Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: http://review.coreboot.org/12199
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Intel's FSP 1.0 platforms are moving back to loading microcode in
coreboot instead of in the FSP. Update the Ivy Bridge chips to
be compatible.
Change-Id: I4af155dea51e89ab9595b922c95ceade29a2dc52
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/12196
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: York Yang <york.yang@intel.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This aids the fuzzer test case.
Change-Id: Ic7d43b76cf5660e085e7b3b13499de0358c13197
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/12181
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins)
|
|
As of this commit S3 suspend does not work on any K10 boards,
including this board.
Change-Id: Idd3971422fb2473bff7c60fe8d8161d6e20808ed
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/11946
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: Ic643e31b721f11a90d8fb5f8c8f8a3b7892c0d73
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/11949
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Output how long it took to scan a bus.
Note, that the function `scan_bus()` is called recursively.
Change-Id: I6335e10db783f092ea18d3a1c79f93135bee5826
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/12103
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
`CONFIG_HAVE_MONOTONIC_TIMER`
Some platforms do not have `timer_monotonic_get()` implemented. So only
call `timer_monotonic_get()` if `CONFIG_HAVE_MONOTONIC_TIMER` is
selected and set the times to 0 otherwise.
Change-Id: If9cba4c0c17a7011aa357079d8fdd0aa47ad1b66
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/12105
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Instead of having many different arrays for USB configuration,
with each array containing one bit of information, have one
array containing all the information for each port.
This way we can put the basic tuning parameters into a
structure and then define structures for the basic supported
configurations.
The existing port definitions are taken from the Skylake HSIO
tuning guide.
BUG=chrome-os-partner:40635
BRANCH=none
TEST=build and boot on glados, verify USB functionality in
all ports.
Change-Id: I5873dee011ae9e250b6654c73a7bd5c17681095b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 864040412b2d2923d3acbfca8055724887c58506
Original-Change-Id: Id518b1086abbe4a8c25d77fd4efc2d0de856bd5f
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/306734
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/12163
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add default properties for NAU8825 codec
Change jack detecion irq to level to match the
codec driver
BUG=chrome-os-partner:44481
BRANCH=None
TEST=Build and Boot Kunimitsu board with this patch
Verify Audio jack detection IRQ working
Change-Id: Iaab7a7bfbab30fa0914e56477f7c6a93717b4518
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 58c45538ea6a85724f9ab1837e5cf0971611a1f8
Original-Change-Id: I11466b8fd64b768e1e826639ba37bd6e00810370
Original-Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Original-Signed-off-by: Fang, Yang A <yang.a.fang@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/303760
Original-Commit-Ready: Yang Fang <yang.a.fang@intel.com>
Original-Tested-by: Yang Fang <yang.a.fang@intel.com>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/12162
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
For SMT controllers to power gate, all SMT/SMS clock, data and alert signals should be inactive.
The SML0 blocks are not used for any functional purposes and are not configured in the GPIO tables.
SMT hardware will not allow the blocks to be power gated in this scenario. The SML* pins are
now configured as GPIOs - input and deep.
With this change, the SMT blocks are properly power gating.
BRANCH=none
BUG=chrome-os-partner:45618
TEST=build for Kunimitsu, boot on FAB3.
Change-Id: I16b31a8d5c3c9df0f37df15c751c5a0978ac0feb
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d2913a75969008583f454a4bfc9da2156266548b
Original-Change-Id: I00dca84a3f6ba7bda4ca1c206b49ff81482279a5
Original-Signed-off-by: Archana Patni <archana.patni@intel.com>
Original-Signed-off-by: Subramony Sesha <subramony.sesha@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/306391
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/12161
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
For SMT controllers to power gate, all SMT/SMS clock, data and alert signals should be inactive.
The SML0 blocks are not used for any functional purposes and are not configured in the GPIO tables.
SMT hardware will not allow the blocks to be power gated in this scenario. The SML* pins are
now configured as GPIOs - input and deep.
With this change, the SMT blocks are properly power gating.
BRANCH=none
BUG=chrome-os-partner:45618
TEST=build for Glados.
Change-Id: Ie5406f2a1e0c485ac1290e2154755085fa3bb7b9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 5b3fe3c2ddea4c5daedb04078b24cff14efa49d5
Original-Change-Id: I8dcc0bfc121e612a174e6fe3152650d0fcd68f39
Original-Signed-off-by: Archana Patni <archana.patni@intel.com>
Original-Signed-off-by: Subramony Sesha <subramony.sesha@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/306481
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/12160
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Spreadsheet as built indicates:
Samsung 4*8Gb - K4E8E304EE-EGCF - 0b0000
Samsung 4*16Gb - K4E6E304EE-EGCF - 0b0001
Hynix 4*8Gb H9CCNNN8GTMLAR-NUD - 0b0010
Hynix 4*16Gb H9CCNNNBJTMLAR-NUD - 0b0011
Adjust the Hynix spds to match accordingly.
BUG=chrome-os-partner:46573
TEST=None
BRANCH=None
Change-Id: I2ae0335af3557c787cced899bfb80db045f99cd0
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 35ed2b0a5af53203480c726b875875d7c2cfd855
Original-Change-Id: I3cb38b28c454fbd60b776954c377b4559c6efebd
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.orG>
Original-Reviewed-on: https://chromium-review.googlesource.com/306580
Original-Commit-Ready: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/12159
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Always use the common FSP code. Remove the FSP_RAM_INIT, FSP_ROMSTAGE,
FSP_STACK and FSP_STAGE_CACHE Kconfig values.
BRANCH=none
BUG=None
TEST=Build and run on Kunimitsu
Change-Id: Ib3d015cb2dc257e46c2340cc7bc09cf0ffb0492c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 5197b1354d138759dfaa428c665de6cbfb8e8911
Original-Change-Id: I3e3c1c9e6f73009a099c1ec3688dbd8c326fc766
Original-Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/306142
Original-Commit-Ready: Leroy P Leahy <leroy.p.leahy@intel.com>
Original-Tested-by: Leroy P Leahy <leroy.p.leahy@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/12158
Tested-by: build bot (Jenkins)
Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
|
|
Rename soc_display_upd_value to fsp_display_upd_value since the routine
was moved from src/soc/intel/common into src/drivers/intel/fsp1_1.
BRANCH=none
BUG=None
TEST=Build and run on Kunimitsu
Change-Id: Ifadf9dcdf8c81f8de961e074226c349fb9634792
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 95238782702999a178989467694ac1f15c079615
Original-Change-Id: Ibd26ea41bd5c7a54ecd3c237f7fb7bad6dbf7d8a
Original-Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/306351
Original-Commit-Ready: Leroy P Leahy <leroy.p.leahy@intel.com>
Original-Tested-by: Leroy P Leahy <leroy.p.leahy@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/12157
Tested-by: build bot (Jenkins)
Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
|
