Age | Commit message (Collapse) | Author |
|
This simplifies the code flow of the cpu init. APL can do CPU init after
calling FSP-S, while GLK needs to do that before. This is now reflected
directly in the cpu ops rather than using
CONFIG_SOC_INTEL_COMMON_BLOCK_CPU_MPINIT as a proxy.
Change-Id: I7fd1db72ca98f0a1b8fd03a979308a7c701a8a54
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72705
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
By default this limits PCI buses to CONFIG_MMCONF_BUS_NUMBER.
Some platforms have multiple PCI root busses (e.g. xeon_sp), where bus
numbers are limited. This provides a basic check. On some platforms it
looks like programming 0xff to the subordinate bus number confuses and
hangs the hardware.
Change-Id: I0582b156df1a5f76119a3687886c4d58f2d3ad6f
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59395
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
|
|
This patch adds below chip configuration for I2C devices for mtlrvp.
+-----------+--------------------+-------------+
| INTERFACE | PCI Number (B:D:F) | DEVICE |
+-----------+--------------------+-------------+
| I2C0 | 0:0x15:0 | CAM1 |
+-----------+--------------------+-------------+
| I2C1 | 0:0x15:1 | CAM0 |
+-----------+--------------------+-------------+
| I2C2 | 0:0x15:2 | NC |
+-----------+--------------------+-------------+
| I2C3 | 0:0x15:3 | HID |
+-----------+--------------------+-------------+
| I2C4 | 0:0x15:4 | NC |
+-----------+--------------------+-------------+
| I2C5 | 0:0x15:5 | NC |
+-----------+--------------------+-------------+
BUG=b:224325352
BRANCH=None
TEST=Able to boot mtlrvp (LP5/DDR5) to ChromeOS. Also verify serial bus
enumeration through lspci.
00:15.0 Serial bus controller: Intel Corporation Device 7e78 (rev 01)
00:15.1 Serial bus controller: Intel Corporation Device 7e79 (rev 01)
00:15.3 Serial bus controller: Intel Corporation Device 7e7b (rev 01)
Signed-off-by: Harsha B R <harsha.b.r@intel.com>
Change-Id: Ia5964472be902041f961187c0072a89055badd4f
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72647
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
This patch enables display configuration for mtlrvp. The change follows
mtlrvp schematics.
BUG=b:224325352
BRANCH=None
TEST=Able to observe corresponding UPD configuration with FSP dump.
Also verify display over eDP and HDMI.
DdiPortAConfig : 0x1
DdiPortBConfig : 0x0
DdiPortAHpd : 0x0
DdiPortBHpd : 0x1
DdiPortCHpd : 0x0
DdiPort1Hpd : 0x0
DdiPort2Hpd : 0x0
DdiPort3Hpd : 0x0
DdiPort4Hpd : 0x0
DdiPortADdc : 0x0
DdiPortBDdc : 0x1
Signed-off-by: Harsha B R <harsha.b.r@intel.com>
Change-Id: I05bd7427d6a339ee200731a8dd448e85efc694e0
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72645
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
This patch removes the configuration of GPP_A12 for mtlrvp. Garfield
Peak (WLAN) doesn't use GPP_A12 for WAKE_N. Configuring GPP_A12 pin
prevents system entering G3 (reboots) on issuing shutdown -h now. Hence
configuring GPP_A12 as PAD_NC.
BUG=b:224325352
BRANCH=None
TEST=On issuing 'shutdown -h now' system enters G3
Signed-off-by: Harsha B R <harsha.b.r@intel.com>
Change-Id: I5e46b8afd3e0055440fd3c3db4aa5a9f1d4aa556
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72742
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Usha P <usha.p@intel.com>
|
|
We don't need flashrom support just for vboot payloads. The current
default (USE_FLASHROM=1) is mostly harmless, especially if libflashrom
is not present (the autodetection in vboot_reference just spits out a
pkg-config error but doesn't actually fail the build), but it's better
to be clear we don't need it.
BUG=b:172225709
TEST=build
Change-Id: I53bcc2d1e7666646ddad58ba3717cfdd321014e8
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72716
Reviewed-by: Jack Rosenthal <jrosenth@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
1. Enable Cnvi BT Audio Offload feature and also
configure the virtual GPIO for CNVi Bluetooth I2S pads.
2. According to the SOC_GPIO_Table_20230116,
Change GPIO GPP_D15, GPP_D16 to NC.
BUG=b:264834572
TEST=FW_NAME=omnigul emerge-brya coreboot
Change-Id: I4901c8cd660f2d47018e4cccdb67f666f0800423
Signed-off-by: Jamie chen <jamie_chen@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72035
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
|
|
This variant was added without a devicetree, so add the board
specific devicetree according to schematic_20230110.
BUG=b:263060849
BRANCH=None
TEST=FW_NAME=omnigul emerge-brya coreboot
Change-Id: Ie05c152a20953e3e2d5f4ba5f9c00160a3e418e1
Signed-off-by: Jamie Chen <jamie_chen@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71883
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
|
|
NVMe PCIe 9-12 using clk_src1 and clk_req2 mapping to hardware design,
Due to inconsistency between PMC firmware and FSP, we need to set
clk_src to clk_req number, not same as hardware mapping in coreboot.
Then swap correct setting to clk_src=1,clk_req=2 in mFIT.
BUG=b:265720813
TEST=build firmware and veirfy suspend function on DUT.
Cq-Depend: chrome-internal:5351299
Change-Id: Ia057dfa98cb9293d9e212edb4e4ac198e94e8985
Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72051
Reviewed-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Turn off camera power during S0ix to improve power consumption.
BUG=b:265754302
BRANCH=firmware-brya-14505.B
TEST=emerge-brya coreboot chromeos-bootimage
Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com>
Change-Id: Ie2b300783adfc1cab30bc897d086a3674436724a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72089
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Add configuration to bump up the SPI flash bus speed from 66 MHz to 100
MHz starting the board version of the current phase.
BUG=b:260127676
TEST=Build and boot to OS in Frostflow with 100 MHz SPI bus speed.
Observe that the boot time improved by 100 ms compared to 66 MHz SPI
flash bus speed.
firmware log:
SPI fast read speed: 100 MHz
At 66 MHz:
Total Time: 1,563,384
At 100 MHz:
Total Time: 1,462,570
Change-Id: I9435f4ad0d3541b040703dc9a453badbd080dc09
Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72694
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Fix:
cc1: error: src/vendorcode/amd/pi/00670F00: No such file or directory [-Werror=missing-include-dirs]
cc1: error: src/vendorcode/amd/pi/00670F00/binaryPI: No such file or directory [-Werror=missing-include-dirs]
cc1: error: src/vendorcode/amd/pi/00670F00/Include: No such file or directory [-Werror=missing-include-dirs]
cc1: error: src/vendorcode/amd/pi/00670F00/Proc: No such file or directory [-Werror=missing-include-dirs]
cc1: error: src/vendorcode/amd/pi/00670F00/Proc/Common: No such file or directory [-Werror=missing-include-dirs]
cc1: error: src/vendorcode/amd/pi/00670F00/Proc/CPU: No such file or directory [-Werror=missing-include-dirs]
cc1: error: src/vendorcode/amd/pi/00670F00/Proc/CPU/Family: No such file or directory [-Werror=missing-include-dirs]
cc1: error: src/vendorcode/amd/pi/00670F00/Proc/Fch: No such file or directory [-Werror=missing-include-dirs]
cc1: error: src/vendorcode/amd/pi/00670F00/Proc/Fch/Common: No such file or directory [-Werror=missing-include-dirs]
Change-Id: I745f4fc421c91c413fe0d3155d3494ed9704eeb6
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71855
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Not exactly sure about the usb4_xhci controllers, but for now I assume
those will behave like any other XHCI controller.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I22384f58e245a1486793831d29d22e9c618f646c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72773
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
The PCI Device ID Assignments table from PPRs #57019 Rev 1.65 and
PPR #57396 Rev 1.54 were used as a reference. Some devices will need to
have ops added in future patches. Since the xhci_2 device isn't there
any more, also drop it from the mainboard devicetrees. The actual USB
port configuration on xhci_0 and xhci_1 is updated in the next patch.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I49721bc44fa1e2a0118a8c3ac79a36aee64be687
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72771
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Now that the PCIe ports on device 1 are added, rename the aliases for
the PCIe ports on device 2 to have a common naming scheme. For phoenix
the device alias names are based on the device and function number the
bridge is connected to.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I5f5698408019bb9222b599dd78540ca1b187b56d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72737
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Only the PCIe ports on the functions of device 2 were present in the
devicetree and had the amd_external_pcie_gpp_ops ops assigned. Add the
missing PCIe ports on the functions of device 1 and assign the
amd_external_pcie_gpp_ops ops to them.
This SoC uses a slightly different naming scheme for its PCIe GPP ports.
Previously the PCIe GPP bridge number from the PCI Device ID Assignments
table from the PPR was used. Those bridge numbers are one less than the
function numbers of the device. This is due to function 0 being a dummy
bridge to avoid having to shuffle around the function numbers when the
first bridge is unused, since the PCIe specification mandates the
function 0 to be implemented if any other function on the same device is
implemented. In order for the device aliases to be consistent with the
PCIe device and function numbers which is way more commonly used and
also what lspci shows and what goes into the DXIO descriptors, change
the naming scheme of the aliases.
This was checked with PPR #57019 Rev 1.65 and PPR #57396 Rev 1.54.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ib5c62c1df585877d9b6986a462a3636d4f2eb4c7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72736
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This enables L1.2 for the SSD port.
link_hotplug is unused on Mendocino, so remove it while I'm here, just
as code cleanup. This has no functional difference.
Enabling L1.2 on other devices currently causes problems. Debug is
ongoing.
BUG=b:265890321
TEST=Build & boot, look at states enabled in lspci. Test device
functionality.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I8940856a127c8a4ba45148cbbf07a08b621beb4d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72391
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This patch requests FSP to enable the MRC fast boot feature along
with FSP v2473.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: If4a621e55c853505f7a702181ae5a70dc56d5b5a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72745
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch drops the WFC sensor OV8856 (reused from the Brya chassis)
support for Rex and added support for Rex specific UFC sensor OV13B10.
BUG=b:267264348
TEST=WFC MIPI cameras have been enabled using google/rex Proto 1.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ic785b82db4368f40d91921f29c218cf417938541
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70226
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
Enabling `SaGv` along with FSP v2473 is causing blank display issue.
Mostly likely we shouldn't enable SaGv yet on Intel MeteorLake.
BUG=b:267446159
TEST=Able to see ChromeOS UI in consecutive boot.
This reverts commit cbca81c5946384843197c08401c4266f45fef4a2.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ifbcc36515f7550c183c40e5af94684f5c3e39a7a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72774
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Commit b171f768127d ("soc/amd/*: Hook up GPP bridges ops to devicetree")
missed adding the amd_external_pcie_gpp_ops ops to the gpp_gfx_bridge
PCIe ports, so add them. Those devices were previously covered by the
PCI_DID_AMD_FAM17H_MODEL60H_PCIE_GPP_D1 PCI device ID in the list that
got removed in the referenced commit.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I55434bf486569b32901b3840193a09cc5955abb2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72735
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
This switches the Picasso SoC to use the common reset code.
Picasso supports warm resets, so set the SOC_AMD_SUPPORTS_WARM_RESET
flag.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I52515b20ef6c70b137f176d95480757b16bd8735
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72755
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This switches the Phoenix & Glinda SoCs to use the common reset code.
Cezanne and newer do not support warm reset, so use cold resets in all
cases (including the OS).
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I4593fa9766ac9e988722a02e355c971e147b8fae
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72754
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This switches the Cezanne & Mendocino SoCs to use the common reset code.
This patch does not change any behavior on those chips.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ie05c790573e4e68f3ec91bacffcc7d7efb986d79
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72659
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This allows us to use the same file for PCO, CZN, MDN, PHX, & Glinda.
PCO supports the warm reset, and future chips can support it by setting
the SOC_AMD_SUPPORTS_WARM_RESET option.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ib6459e7ab82aacbe57b4c2fc5bbb3759dc5266f7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72658
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Removing default on/off from mainboard devicetrees is left as a follow-up.
Change-Id: I74c34a97ea4340fb11a0db422a48e1418221627e
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69502
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
No BS_ON_EXIT hooks are run on BS_PAYLOAD_BOOT or BS_OS_RESUME, so don't
allow these hooks.
Change-Id: I318165f0bd510aed3138d3612dd3e264901aba96
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72708
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Benjamin Doron <benjamin.doron00@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
No bootstate hook is called on exit of BS_OS_RESUME or BS_PAYLOAD_BOOT.
Change-Id: I2b5b834d0663616a9523fd119f007e3bac8e7bf2
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72707
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Benjamin Doron <benjamin.doron00@gmail.com>
|
|
Adding EC_HOST_EVENT_PANIC to SCI mask allows the EC to interrupt the
Kernel when an EC panic occurs. If system safe mode is also enabled
on the EC, the kernel will have a short period to extract and save info
about the EC panic.
BUG=b:266696987
BRANCH=None
TEST=Observe kernel ec panic handler run when ec panics
Change-Id: I9b50ab3c0bcef192ef89f173852cda222f1533c7
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72455
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
|
|
Enable the HPD GPIO so that the USB-C port can be used for
DisplayPort.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: If93d08f64cf7b09bb47622bdc7f22280b8a48174
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72431
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch enables CNVi_BT Core and Wifi for mtlrvp based on mtlrvp
schematics.
1. Enable CNVi BT Core in device tree
2. Enable CNVi Wifi (pci 14.3) device in device tree
BUG=b:224325352
BRANCH=None
TEST=Able to observe corresponding UPD configuration with FSP dump and
able to boot mtlrvp (LP5/DDR5) to ChromeOS.
CNVi Mode = 1
Wi-Fi Core = 1
BT Core = 1
BT Audio Offload = 0
BT Interface = 1
Signed-off-by: Harsha B R <harsha.b.r@intel.com>
Change-Id: I22575bf31b540f9dc1149a2766268285001b72f4
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72695
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This patch moves ME host firmware status register structures to ME
header file. It also marks unused structure fields to reserved.
The idea here is to decouple ME specification defined structures from
the source file `.c` and keep those into header files so that in future
those spec defined header can move into common code.
The current and future SoC platform will be able to select the correct
ME spec header based on the applicable config. It might be also
beneficial if two different SoC platforms would like to use the same
ME specification and not necessarily share the same SoC directory.
BUG=b:260309647
Test=Able to build and boot.
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: Ib96fcb86fd2c3fe16f23c8f038f4930a832a5b01
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72416
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Change-Id: I7eaf625e5acfcefdae7c81e186de36b42c06ee67
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72704
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
The patch disables Tccold Handshake to prevent possible display
flicker issue for skolas board. Please refer to Intel doc#723158
for more information.
BUG=b:221461379
BRANCH=firmware-brya-14505.B
TEST=Boot to OS on Skolas, verify upd setting.
Change-Id: Ic184a61c27abd729667cd181d8f9954f58b67856
Signed-off-by: Selma Bensaid <selma.bensaid@intel.com>
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68636
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This commit provides a dev tree setting for partners to enable/disable
TccoldHandshake for the sighting in doc:723158
BUG=b:221461379
BRANCH=firmware-brya-14505.B
TEST=compile ok and FSP UPD is config properly
Change-Id: Ica13b98204acebef7f0b9a4411b4ac19f53cad6e
Signed-off-by: Kane Chen <kane.chen@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68635
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Expose DisableDynamicTccoldHandshake in header so that
coreboot can disable it.
BUG=b:221461379
BRANCH=firmware-brya-14505.B
TEST=Boot to OS, check UPD value in debug FSP build.
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Change-Id: I0d953f37a2f0dac58fd339e3fe0dc847d5e6d892
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72693
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Some reserved address range listed in Alder Lake Platform Firmware
Architecture Specification document 626540 section 6.4 ADL - System
Memory Map such as North TraceHub ranges were missing. Details about
North TraceHub (aka. Intel TraceHub) can be found in Intel Trace
Hub (Intel TH) Developer's Manual document 671536.
BUG=b:264648959
TEST=Compilation successful
Change-Id: I14803a7297c8c5edefe564d92bfe7314f6769942
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72635
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: YH Lin <yueherngl@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
This patch adds the {MCH:a706, TDP:28W} missing 28W configuration.
BUG=b:267666609
BRANCH=firmware-brya-14505.B
TEST=Power Limit are properly set on skolas 28W
Change-Id: Ice35d622eeec5799c53de086430d00dc8789097e
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72734
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Add ADL-N 15W CPU thermal settings.
BUG=b:265101768
TEST=emerge-nissa coreboot
Change-Id: I325704d6fc4ddaf56eaddd6a69bc619588df99cd
Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71860
Reviewed-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Reviewed-by: Vidya Gopalakrishnan <vidya.gopalakrishnan@intel.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Removed workaround since the latest schematics fixed.
Power Sequencing of ELAN6918 (in ACPI) after this patch
`POWER enabled -> RESET deasserted -> Report EN enabled`
BUG=b:247029304
TEST=Verified ELAN touch panel is working as expected after booting
Google/rex device to ChromeOS.
Signed-off-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Change-Id: I19629262776f7e0cccbdebb2285890d177a8a8a6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72725
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
If we show the user early signs of life during CSE FW sync or MRC
(re)training, log these to the eventLog (ELOG_TYPE_FW_EARLY_SOL).
These can be used to ensure persistence across global reset (e.g. after
CSE sync) so that they can be later retrieved in order to build things
such as test automation ensuring that we went through the SOL
path/display initialized.
BUG=b:264648959
TEST=event shows in eventlog after CSE sync and/or MRC
Change-Id: I8181370633a1ecff77b051d3110f593c3eb484a2
Signed-off-by: Tarun Tuli <taruntuli@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71295
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Add a new eventLog type of ELOG_TYPE_FW_EARLY_SOL to support logging
when we show early signs of life to the user.
BUG=b:266113626
TEST=event shows in eventlog after CSE sync and/or MRC
Change-Id: I3bd5a250c0be824dbbad0236cee7d61a1ffdbc6c
Signed-off-by: Tarun Tuli <tarun.tuli@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72670
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Intel SPR-SP (Sapphire Rapids Scalable Processor) was product launched
on Jan. 10, 2023.
Change-Id: I14cf115b02d8edff9b48e744b798a3b1ba18b8bf
Signed-off-by: Jonathan Zhang <jonzhang@meta.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72439
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Simon Chou <simonchou@supermicro.com.tw>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
|
|
Create overridetree and GPIO config based on latest schematic:
1. Update PCIe ports
2. Update USB ports
3. Remove unused I2Cs
4. Remove unused peripherals (SD card, eDP, speakers)
5. Add LAN
6. Thermal policy for updated temp sensors
BUG=b:260934185, b:260934719
BRANCH=dedede
TEST=build
Change-Id: I4789be2eee1d01288031bc1e8ee5c9d6df71f9fe
Signed-off-by: Liam Flaherty <liamflaherty@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71882
Reviewed-by: Adam Mills <adamjmills@google.com>
Reviewed-by: Sam McNally <sammc@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Contents of the EDID are passed by a reference to an array
of length 0x80, for which the macro 'PTN_EDID_LEN' has already
been around.
This patch makes use of this macro within the driver and mainboard
implementation utilizing it.
BUG=none
TEST=A successful build of mc_apl{1,4,5,7} and mc_ehl3 mainboards.
Change-Id: If7d254aaf45d717133bb426bd08f8f9fe5c05962
Signed-off-by: Jan Samek <jan.samek@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72653
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
|
|
This is regarding issues observed on multiple Brya and Nissa
variant such as Skolas and Nivviks. Issue is that once coreboot
sets GPE_EN bit for the GPIO pin and locks it, kernel is not able
to change the control bit. Hence kernel is not able to control the
IRQ on the pin when required.
This issue was root caused to the patch which was setting GPE_EN
bits for the GPIOs before locking.
Ref: commit 38b8bf02d820
("intelblocks: Add function to program GPE_EN before GPIO locking")
This patch skips the locking for GPP_F14 to allow kernel to
configure it later during reboot or shutdown as required.
BUG=b:254064671
BRANCH=None
TEST=Shutdown works on Skolas and Brya board with the patch.
Signed-off-by: Maulik Vaghela <maulikvaghela@google.com>
Change-Id: I7e4a6ac4668028bcd5fa400b9aa8eccf36a79620
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72648
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
There is an existing issue for skolas boards where board wakes up
from shutdown immediately due to touchpad wake signal.
This issue was root caused to the patch which was setting GPE_EN
bits for the GPIOs before locking.
Ref: commit 38b8bf02d820 ("intelblocks: Add function to program GPE_EN before GPIO locking")
Later issue was found to be with GPP_F14 configuration for skolas
boards. While shutting down, kernel is not able to disable IRQ for
touchpad due to GPE_EN register getting locked and it is preventing
shutdown of the board.
This patch skips the locking for GPP_F14 to allow kernel to
configure it later.
BUG=b:254064671
BRANCH=None
TEST=Shutdown works on Skolas board with the patch.
Nissa Bug: 234097956
Signed-off-by: Maulik Vaghela <maulikvaghela@google.com>
Change-Id: I09cf1af1f5ab11b06073755374ee8a306984d557
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72426
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Neither TOP_MEM_MASK nor TOP_MEM_MASK_KB is used, so drop the two
definitions.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I0b2dfb7be27884dffb948876aabb73f99834c281
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72649
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
This patch enables S0i2.2 by letting 1.5V Phy supply to control the
externa FET.
BUG=b:256805904
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I8771c11ce3b305343c7e96510e1375538d5e7f04
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72709
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sukumar Ghorai <sukumar.ghorai@intel.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
Use acpi_create_dmar_ds_ioapic_from_hw() to generate DMAR entries.
This can restore s3 resume capability for Sandy Bridge platforms lost
after commit d165357ec37c ("sb,soc/intel: Use
register_new_ioapic_gsi0()").
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Change-Id: I83e735707cd9ff30aa339443593239cd7e3e4656
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72513
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
USB1_DRV_VBUS is used to provide 5V power for USB on MT8188 EVB and it's
not used on Geralt. Therefore, remove the GPIO setting of USB1_DRV_VBUS.
TEST=read usb data successfully.
BUG=b:236331724
Change-Id: Iffea7b288c83c81648d4c7ca30d2f0961f9853ff
Signed-off-by: Liju-Clr Chen <liju-clr.chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72641
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
With New Crypto upgrade we need to have 1 block of 4Kb increase in
romstage, by which we can see an improvement of Boot performance
by 100 msec.
BUG=b:218406702
TEST=Validated on qualcomm sc7280 development board
Boot performance improved by 100 msec observed.
Change-Id: I9f5c8a79993fc1c529fae5cea4c4182663643ddd
Signed-off-by: Sudheer Kumar Amrabadi <quic_samrabad@quicinc.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72646
Reviewed-by: Shelley Chen <shchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
During boot, gpi_firmware_load gets called twice because there are
2 serial engines. Thus gsi_fw blob is also decompressed twice and is
written to base addresses of SEs. This is redundant.
Perform the decompression once on first call and save the header
in static variable which can be reused in next call.
BUG=b:262426214
TEST=Validated on qualcomm sc7280 development board
Saving of 80ms observed while testing with 130 boot cycles.
Change-Id: If98a3974f0791dffdf675c02cc28375d0485c485
Signed-off-by: Vijaya Nivarthi <vnivarth@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71927
Reviewed-by: Shelley Chen <shchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Like Cezanne, Mendocino does not support warm resets. Change all resets
(including resets in the OS) to cold resets (like Cezanne).
BUG=b:248221908
TEST=Run suspend_stress_test, then reboot
Change-Id: I1fbb4cc6eb6e6de9616d00d0191ccf3c0ac55278
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72486
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
|
|
This patch moves ME host firmware status register structures to ME
header file. It also marks unused structure fields to reserved.
The idea here is to decouple ME specification defined structures from
the source file `.c` and keep those into header files so that in future
those spec defined header can move into common code.
The current and future SoC platform will be able to select the correct
ME spec header based on the applicable config. It might be also
beneficial if two different SoC platforms would like to use the same
ME specification and not necessarily share the same SoC directory.
BUG=b:260309647
Test=Able to build and boot.
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: I58faed286718f5eab714cd39001177e50feb4f8b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72414
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This patch moves ME host firmware status register structures to ME
header file. It also marks unused structure fields to reserved.
The idea here is to decouple ME specification defined structures from
the source file `.c` and keep those into header files so that in future
those spec defined header can move into common code.
The current and future SoC platform will be able to select the correct
ME spec header based on the applicable config. It might be also
beneficial if two different SoC platforms would like to use the same
ME specification and not necessarily share the same SoC directory.
BUG=b:260309647
Test=Able to build and boot.
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: Ic42c67163fe42392952499293e91e35537cb9147
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72415
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This patch moves ME host firmware status register structures to ME
header file. It also marks unused structure fields to reserved.
The idea here is to decouple ME specification defined structures from
the source file `.c` and keep those into header files so that in future
those spec defined header can move into common code.
The current and future SoC platform will be able to select the correct
ME spec header based on the applicable config. It might be also
beneficial if two different SoC platforms would like to use the same
ME specification and not necessarily share the same SoC directory.
BUG=b:260309647
Test=Able to build and boot.
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: I34d3c4a60653fe0c1766cd50c96b8d3fe63637d1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72412
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
The D-state list lists the devices with the corresponding
D-state that the devices should be in, in order to enter LPM.
DPTF is not mentioned in Intel's document 595644 as one of
the devices.
This CL removes it to avoid a potential error seen in ADL
devices as mentioned in commit 3fd5b0c4cdeb ("soc/intel/adl:
remove DPTF from D-states list used to enter LPM")
TEST=Built and tested on Rex, saw SSDT generated properly.
BUG=b:231582182
Signed-off-by: Eran Mitrani <mitrani@google.com>
Change-Id: I9192ed9a7fb59ebba14f6d5082b400534b16ca72
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72603
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The Windows DPTF drivers expect this method, and if not present appear
to hang. Adding this method fixes DPTF under Windows on drallion.
Modeled after existing method used by chrome-ec.
TEST=build/boot Win11 on google/drallion, verify DPTF functional.
Change-Id: I6570345379da413273251ecf5209c4997aac9b11
Original-patch-by: Coolstar <coolstarorganization@gmail.com>
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72578
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
|
|
Configure the rcomp, dqs and dq tables based on the schematic.
BUG=b:264340545
BRANCH=firmware-brya-14505.B
TEST=FW_NAME=omnigul emerge-brya coreboot
Change-Id: I82ca8aa9c3535983d5c506c15dbc69e7be926fa0
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71930
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Marx Wang <marx.wang@intel.com>
|
|
This patch selects USE_UNIFIED_AP_FIRMWARE_FOR_UFS_AND_NON_UFS for
Google/Omnigul variant which intends to achieve a unified AP firmware
image across UFS and non-UFS skus.
BUG=b:263846075
TEST=FW_NAME=omnigul emerge-brya coreboot
Change-Id: I90ae116ccccde48792aeafaa683c7420a95c9886
Signed-off-by: Jamie Chen <jamie_chen@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72509
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
After powering on the device, we need to pull USB3_HUB_RST_L up to
enable USB3 Hub.
TEST=boot kernel from USB ok
BUG=b:264841530
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Signed-off-by: Liju-Clr Chen <liju-clr.chen@mediatek.com>
Change-Id: I8df35efb78e90a5b3314840fe2eae81d6e501242
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72594
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Currently there is a problem, where two Displayports are not working. To
be precise: TCP0 and TCP1 (Type-C Port 0/1) are not working.
Setting the lane count of the TCP0 and TCP1 to x1 works fine.
Setting the lane count of the TCP0 and TCP1 to x2 does not work.
Setting the lane count of the TCP0 and TCP1 to x4 does not work.
The reason for that is currently unknown.
This change sets the lane count of the TCP0 and TCP1 Port to x1 length
in the VBT binary.
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: I182b528275152bf5adcb01a56816afd65674aed3
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72610
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch updates the print message to start with uppercase, 'board'
to 'Board'.
BUG=b:224325352
BRANCH=None
TEST=Able to observe proper print message when invalid board id is
configured.
Signed-off-by: Harsha B R <harsha.b.r@intel.com>
Change-Id: Ie82df940cbd1eba9c5d485b48648c2bc8f234aae
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72638
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Usha P <usha.p@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
<device/pci.h> chain-includes <device/pci_def.h> & <device/pci_type.h>.
Change-Id: I4e5999443e81ee1c4b1fd69942050b47f21f42f8
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72626
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iec9cf7c195fa5cb5c8d992aeab400d05cbe801c2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72494
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I103cdce8c23ff4adbf1057fa26bd67275f2ab0e5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72493
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I036dcddf89e8d865d0dc3ef0bd9e48842d8bf6c3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72492
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I77a91c0a6d937772bf25fa936cec8a710b9acf72
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72491
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
In CB:71614 Kyösti pointed out that ACPI_GPE0_BLK is the wrong address
to assign to proc_blk_addr; the correct one would be ACPI_CPU_CONTROL.
When looking a bit closer into this, it turned out that
acpigen_write_processor is generating deprecated AML opcodes, so replace
the acpigen_write_processor call with a call to the newly added
acpigen_write_processor_device function that also doesn't have the
proc_blk_addr and proc_blk_len parameters. The information about the IO
port for entering C-states is already written into an SSDT by
acpigen_write_CST_package which is likely also the reason why the wrong
proc_blk_addr value wasn't noticed for a very long time.
TEST=Mandolin still boots Ubuntu 22.04 LTS and Windows 10 and no
possibly related errors show up. Linux gets the expected C-state
information from the _CST package inside the processor device scope.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie67416e19e431029dd12da66ad44ddfa8586df03
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72490
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
The ACPI PROCESSOR_OP has been deprecated in ACPI 6.0 and dropped in
ACPI 6.4 and is now permanently reserved. As a replacement, DEVICE_OP
with the special HID ACPI0007 should be used instead. This special HID
was introduced in version 3 of the ACPI spec. To have a function to
generate this, acpigen_write_processor_device is introduced. The CPU
index is used as UID which can be assumed to be unique.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ifb0da903a972be134bb3b9071f81b441f60917d1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72469
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Follow thermal team's request on b/248086651 comment#27. Update the
thermal table setting for each mode and the conditions of temperature
switching.
BUG=b:248086651
TEST=emerge-skyrim coreboot
Change-Id: Ida10d9b10c33dea11440879afda07c04c1eccb9f
Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72006
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
|
|
Add the EDK2 variable format header in order to access the SPI flash
variable store.
https://github.com/tianocore/edk2/blob/edk2-stable202005/MdeModulePkg/Include/Guid/VariableFormat.h
Commit Hash: 9d510e61fceee7b92955ef9a3c20343752d8ce3f
Change-Id: Ibe44925555a7d1d2361dd48c0325b840bd68e0ca
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61959
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This register isn't used in coreboot and isn't defined in the Picasso
PPR #55570 Rev 3.18.
To enter a lower C-state, a read request to a special IO port is done.
The base address of this group of IO ports is configured in
set_cstate_io_addr via the MSR_CSTATE_ADDRESS and that read won't leave
the CPU. IIRC trying to put the MMIO mapping for entering the lower
C-states into the _CST package didn't work as expected when it was tried
on I think Cezanne.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ib189993879feaa0a22f6810c4bd5c1a0bc8c5a27
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72497
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
This patch moves ME host firmware status register structures to ME
header file. It also marks unused structure fields to reserved.
The idea here is to decouple ME specification defined structures from
the source file `.c` and keep those into header files so that in future
those spec defined header can move into common code.
The current and future SoC platform will be able to select the correct
ME spec header based on the applicable config. It might be also
beneficial if two different SoC platforms would like to use the same
ME specification and not necessarily share the same SoC directory.
BUG=b:260309647
Test=Able to build and boot.
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: I7dfd331e70f6d03c88248ca5147dbe6785a8e69d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72413
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
It turns out that the [0xfa000000-0xfaffffff] range conflicts with
some North TraceHub address space ranges ([0xfad00000-0xfadfffff] and
[0xfacfc000-0xfacfffff]).
Experiments have established that this conflicting range results in an
unpected PIPE A underrun issue reported by i915 and some visible
flickers on the display during boot.
The [0xf0000000-0xffffffff] range is a crowded memory space with
resources statically assigned to some devices but also some ranges
used at various point in the boot flow by the FSP.
To not run into any other potential conflicts, we want to pick a
unused memory space. But at this early stage of the boot, we do not
have full knowledge of what memory space is going to be used by the
FSP. As a result, we decided to pick the [0xaf000000-0xafffffff] range
as:
1. It does not conflicting with any coreboot memory space usage
2. It is the address the FSP uses by default for GFX MMIO BAR0 and as
such should not conflict with any FSP memory space usage.
BUG=b:264648959
BRANCH=firmware-brya-14505.B
TEST=No flickers observed on boot
Change-Id: I6a00350ff4007bb7692d2ff6598b946cc6123302
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72605
Reviewed-by: YH Lin <yueherngl@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Useful to see which architecture x86_32 or x86_64 coreboot was built for.
Change-Id: I34eec64ac32254c270dcbb97e20a7e6be0f478fc
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59761
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
|
|
This fixes a NULL pointer deref introduced by 69cd729 (mb/*: Remove
lapic from devicetree).
Change-Id: I816fddfe3efe3c3aefe1b2ee28426dc1e1f3c962
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72599
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Functionality wise nothing changed, except that the first misspellings
caused SBOM_BIOS_ACM_PATH and SBOM_SINIT_ACM_PATH to not work before.
- Fix misspelling of CONFIG_BIOS_ACM_PATH -> CONFIG_SBOM_BIOS_ACM_PATH
- Fix misspelling of CONFIG_SINIT_ACM_PATH -> CONFIG_SBOM_SINIT_ACM_PATH
- Put SBOM_COMPILER_ handling into Kconfig instead of Makefile
- Reorder CONFIG_ paths (for readablity)
- Add in code comments (for readablity)
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: If67bc3bd0d330b9b5f083edc4d1697e92ace1ea0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72379
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
The LPC BIOS decode lock bit is defined in EBG EDS documentation.
Signed-off-by: Tim Chu <Tim.Chu@quantatw.com>
Change-Id: I60df7e6da2b22b8eeb2094aeb5ee9667043bb30b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71954
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This uses a simpler form of #if to check if CONFIG_SAVE_MRC_AFTER_FSPS
is enabled, referencing the Kconfig variable only once and defaulting
to the original behavior if not.
Change-Id: I4711c1474d9a3a5c685dd31561619c568fab075c
Signed-off-by: David Hendricks <david.hendricks@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72587
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
<gpio.h> chain-include <soc/gpio.h>.
Change-Id: I48191064fcee53ca843a537aa36bdbbd57736bf2
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72588
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: Id8e1a52279e6a606441eefe30e24bcd44e006aad
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69815
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Jonathon Hall <jonathon.hall@puri.sm>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
|
|
Since the PSE GBE0 MAC has been disabled on this board in
commit 343644006f89 ("mb/siemens/mc_ehl3/devicetree.cb:
Remove TSN GbE 0"), therefore disable the corresponding
GPIOs as well.
BUG=none
TEST=Test link detection and IP assignment on the remaining
ports (PSE GBE1 and PCH GBE0) of mc_ehl3.
Change-Id: Ifa055f58894688471d68b9b93fcb994fdcb2a568
Signed-off-by: Jan Samek <jan.samek@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72449
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The parallel mp code picks up lapics at runtime, so remove it from all
devicetrees that use this codebase.
Change-Id: I5258a769c0f0ee4bbc4facc19737eed187b68c73
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69303
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
This patch adds initial romstage code and spd data for LP5 memory
parts for MTL-RVP. This also configures memory based on the board id.
Memory - x32 LPDDR5
Vendor/Model - Micron/MT62F2G32D8DR-031 WT:B
Board ID -
0b0000 - Empty spd hex file
0b0001 - DDR5 (Empty spd hex file)
0b0010 - LPDDR5 (MT62F2G32D8DR-031 WT:B)
BUG=b:224325352
TEST=Able to boot intel/mtlrvp (LP5 SKU) to ChromeOS
Signed-off-by: Ashish Kumar Mishra <ashish.k.mishra@intel.com>
Change-Id: I15b352eb246aed23da273e56490c7094eae9d176
Signed-off-by: Harsha B R <harsha.b.r@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69741
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This patch selects USE_UNIFIED_AP_FIRMWARE_FOR_UFS_AND_NON_UFS for
Google/Marasov variant which intends to achieve a unified AP firmware
image across UFS and non-UFS skus.
Note: Enabling this config would introduce an additional warm reset
during the cold-reset scenarios due to the function disabling of the
UFS controller as results we are expecting ~300ms higher boot time
(which might not be user visible because `cbmem -t` can't include
impacted boot time due to in-between resets).
BUG=b:264838335
TEST=Able to enter S0ix on Marasov NVMe sku after disabling UFS
during boot path.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ie8b8814cdb5e0d97a382cebfe82868ada5762341
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71990
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Intel SPR-SP processor has socket type as
PROCESSOR_UPGRADE_SOCKET_LGA4677 which is different
from the socket type of CPX-SP and SKX-SP.
Change-Id: Id2279cc0c1fa3f007d7c081af6f78e5aa98d2f3d
Signed-off-by: Christian Walter <christian.walter@9elements.com>
Signed-off-by: David Hendricks <ddaveh@amazon.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71947
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Intel SPR-SP (Sapphire Rapids Scalable Processor) chipset
belongs to Xeon-SP family. It was product launched on
Jan. 10, 2023.
Signed-off-by: Jonathan Zhang <jonzhang@meta.com>
Signed-off-by: Tim Chu <Tim.Chu@quantatw.com>
Change-Id: Ifece05e2fbcc454cdee8e849cb4f146c89f54333
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71946
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Now that we support >1 Xeon-SP, XEON_SP_COMMON_BASE no longer
reflects the socket type. This uses SOC_INTEL_* Kconfig variables and
returns the correct socket type for Cooper Lake-SP.
Signed-off-by: David Hendricks <ddaveh@amazon.com>
Change-Id: I142de5f040f3b76e352f27c00fe9e50787df5712
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72498
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Intel Sapphire Rapids Scalable Processor was product launched
on Jan. 10, 2023.
Add the FSP/HOB header files corresponding to 2022 ww43 git tag
EGLSTRM.0.RPB.0090.D.03.
Change-Id: I818da37c10f40045d98a9f73e82034c3fe6459e2
Signed-off-by: Jonathan Zhang <jonzhang@meta.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71948
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
|
|
When Kconfig SAVE_MRC_AFTER_FSPS is selected, save MRC training
data after FSP-S instead of FSP-M. For now only SPR-SP server
FSP supports this.
This issue surfaces with SPR-SP, because of the memory type
(DDR5 support) and memory capacity (more memory controllers, bigger
DRAM capacity). Therefore Intel decided to save MRC training data after
FSP-S with SPR-SP FSP.
Change-Id: I3bab0c5004e717e842b484c89187e8c0b9c2b3eb
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71950
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The PMC registers are quite different between LBG and EBG. Move pmc.h
to lbg directory to differentiate.
Change-Id: I6f14059942210c222631e11cced0b5c05d3c1dc6
Signed-off-by: Jonathan Zhang <jonzhang@meta.com>
Signed-off-by: David Hendricks <ddaveh@amazon.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72399
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I43590f0f792fca1c90ee8f8b32e6be47943c59df
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72453
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This functionality is used in multiple places, so factor it out into a
function. Compared to acpigen_write_processor_cnot, the buffer size is
decreased from 40 to 16 bytes, but the format string specified by
CONFIG_ACPI_CPU_STRING results in 9 chars and a NULL byte which will fit
into the buffer without any issue. I've seen the CPU devices being put
into another scope within \_SB, but even in that case that would be 14
chars and a NULL byte whist still fits into the 16 byte buffer. For
acpigen_write_processor and acpigen_write_processor_package this doesn't
change any edge case behavior. In the unrealistic case of the format
string resulting in a longer CPU device string, this would have been a
problem before this patch too.
Also drop the curly braces of the for loop in
acpigen_write_processor_package. This makes the code a bit harder to
read and isn't a very good idea, but with the curly braces in place, the
linter breaks the build :(
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I5d8291a2aaae2011cb185d72c7f7864b6e2220ec
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72452
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
ACPI_CPU_STRING specifies the format string for the scope of the
processor devices in the generated ACPI code. Also point out that the
resulting string will be truncated to at most 15 chars to fit into the
16 byte buffer used in two functions in acpigen.c.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I1fb1db8adeecd783c835a500d28a13b823cda155
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72451
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Not all Chrome-EC devices have a keyboard or use Vivaldi for key
remapping, so demote the printk output when the EC doesn't support
it from ERROR to INFO. Adjust the printk text for clarity.
Change-Id: I14059f4e3e56ff891f302601d5acc1bb842cffc1
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72474
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The current CMOS option causes Linux to not boot, as the GRUB EFI
loader will report an incorrect parameter.
Update the CMOS option so that the corresponding UPD is changed when
the wireless is set to disable, so that the root port for the wireless
is also disabled.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I607d700319d6a58618ec95b3440e695c82dff196
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71896
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change the Type-C USB 2.0 interface to a standard port, as the
Type-C macro will not work in Linux (dmesg says the cable is
faulty),
This makes the port work reliably in Linux, tested with:
* Manjaro 21
* Ubuntu 22.04
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I6dbf31b6e4603685297e9e5203b0db6ac1b9e24a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72387
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add functions that allow checking and changing PTT state at runtime.
Can be useful for platforms that want to use dTPM instead and have no
means to stitch ME firmware binary with disabled PTT.
The changing function also checks for the current feature states via
HECI to ensure that the feature state will not be changed if not
needed.
TEST=Successfully switch to dTPM on Comet Lake i5-10210U SoC.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I8426c46eada2d503d6ee72324c5d0025da3f2028
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68919
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
|