| Age | Commit message (Collapse) | Author |
|---|
|
Add override devicetree based on schematic_20240607.
BUG=b:333486830
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot
Change-Id: Id3ceff41fdb8e4a57bd6dab6247b622a5d13587d
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82714
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
BUG=none
TEST=Build and verify on Screebo
TEST=make unit-tests
```
$ make tests/commonlib/bsd/string-test
[==========] tests_commonlib_bsd_string-test(tests): Running 1 test(s).
[ RUN ] test_skip_atoi
[ OK ] test_skip_atoi
[==========] tests_commonlib_bsd_string-test(tests): 1 test(s) run.
[ PASSED ] 1 test(s).
```
Change-Id: Ifaaa80d0c696a625592ce301f9e3eefb2b4dcd98
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82910
Reviewed-by: Jakub Czapiga <czapiga@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This commit adds the VBIOS table, extracted from Linux sysfs running on
the stock firmware version 8.02, to the coreboot tree, required for
some graphics backends.
Change-Id: I0d1c9795741e112154bfe6885eea744538373d5a
Signed-off-by: Reagan Bohan <xbjfk.github@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82460
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
This commit defines the panel_cfg register for the Razer Blade Stealth
(Kaby Lake). This enables libgfxinit support. These values are derived
from the stock firmware. First, VBIOSes were extracted from the stock
firmware. Then, intelvbtool was used to extract the VBT from each of the
VBIOS tables. Finally, intel_vbt_decode from igt-gpu-tools was used to
extract the register values. Although there were multiple VBIOSes
present in the firmware, all VBIOSes across both firmwares (on version
1.50 for the H2U and 8.02 for the H3Q) had the same register values.
Change-Id: I4c8b26ffb7a70d08655986084a714206d9d0c96a
Signed-off-by: Reagan Bohan <xbjfk.github@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82458
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Commit 88decca14f84 ("ACPI: Add helper fill_fadt_extended_pm_io()")
moved the population of the extended FADT to a separate function, but
incorrectly placed that function call before various length fields were
populated, leading to spurious validation errors in the cbmem boot log.
Correct this by moving the call to fill_fadt_extended_pm_io() after
the required fields are populated.
TEST=build/boot google/slippy (wolf), verify no FADT errors in cbmem
console log.
Change-Id: I1f8522e4813e6071692206f2b7ad2a2f5086071e
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83035
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I0e5fba7db7d97835001934cb140f4c76bdc46d3e
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82889
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: Icb9e72edf3a982a095dceee4da19f90c53fcddd0
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83021
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Fill in memory config based on the the schematic_20240607.
BUG=b:333486830
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot
Change-Id: I1456f7385e092b606fc0a35b25f3454600af8b23
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82662
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Refer to the reference board of nivviks, and update GPIO settings
based on latest schematic (Riven(ZDK)_MB_Proto_0601.pdf).
BUG=b:337169542
TEST=Local build successfully.
Change-Id: Ic43c743fcc2ec89b5a9e2fbe1a87b833d59f1e74
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82973
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The word "experimental" has been removed from the help text for
HAVE_X86_64_SUPPORT Kconfig. This is because the x86_64 architecture
has now been officially tested and enabled for several x86 SoC
platforms.
This work will provide us with the foundation we need to begin working
with Intel's next-generation SoC platform (which requires to support
64-bit mode of booting by default).
Therefore, we can now remove the word "experimental" from the
"HAVE_X86_64_SUPPORT" Kconfig help text.
TEST=Able to build and boot google/rex64 in 64-bit mode to ChromeOS.
Change-Id: Ibd629f4e2722f3cbabbe297d4481790c9fa9226a
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83009
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Looks like PCIe root port device IDs for 9-series PCH-H are missing from
commit 434d7d45829e (sb/intel/lynxpoint: Add PCI DIDs for 9 series PCHs)
for some reason. Add them, so that coreboot performs PCIe initialisation
for 9-series PCH-H.
Change-Id: I1589418e5e25daabbf09c66c637e9c4f86aa02a6
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82947
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The H110M does not use memory down, and the spd directory doesn't exist
in the board's directory in the first place. This was probably just copy
and paste leftover from some existing Skylake board in the initial port.
TEST=Timeless build does not change.
Change-Id: I35744310b2bf8a14165dae9808c982e6dc274a74
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83010
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: Ia0a5c48c6314f53c4ed72958f5d6f839f0a5c2ca
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77973
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Based on the non-public "ITE IT8659E-I Preliminary Specification V0.7.2
(For H Version)".
TEST=Initialize IT8659E on the new Protectli platform
Change-Id: I11657ec6e1c880f0cee247071486a904a92bb7a1
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80497
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Add coreboot support for qemu's sbsa-ref (Server Base System
Architecture) machine (-m sbsa-ref).
The qemu-sbsa coreboot port runs on EL2 and is the payload of the
EL3 firmware (Arm Trusted Firmware).
Note that, coreboot expects a pointer to the FDT in x0. Make sure
to configure TF-A to handoff the FDT pointer.
Example qemu commandline:
qemu-system-aarch64 -nographic -m 2048 -M sbsa-ref \
-pflash <path/to/TFA.fd> \
-pflash <path/to/coreboot.rom>
The Documentation can be found here:
Documentation/mainboard/emulation/qemu-sbsa.md
Change-Id: Iacc9aaf065e0d153336cbef9a9b5b46a9eb24a53
Signed-off-by: David Milosevic <David.Milosevic@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79086
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Based on autoport output.
It boots to Arch Linux (Linux 6.6.3) from USB and mSATA with SeaBIOS.
Change-Id: I6933bdbcc8d0bbb85d62657624740266284ac71c
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79746
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
The UsbTcPortEn UPD for FSP-S is being set in ramstage, however the
equivalent FSP-M UPD, the UsbTcPortEnPreMem, was not being set.
Following the Meteor Lake example, set the UsbTcPortEnPreMem UPD
as well for Alder Lake.
Setting this FSP-M UPD will cause FSP to properly program sideband
use BSSB_LSx pins for the enabled Type-C ports. Required for proper
DCI debug and TCSS initialization flow.
Change-Id: If3b79167ec1769ddfb7d28a6c78a3e80bd10afe7
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80500
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Mainboard is QAL80/LA-7781P (UMA). The version with an Nvidia dGPU was
not tested. This is based on the autoport output with some manual fixes.
The VBT was obtained using `intelvbttool --inlegacy --outvbt data.vbt`
while running version A24 (latest version) of the vendor firmware.
The flash is 8MiB + 4MiB, and can be easily accessed by removing the
keyboard. It can also be internally flashed by sending a command to the
EC, which causes the EC to pull the FDO pin low and the firmware to skip
setting up any chipset based write protections [1]. The EC is the SMSC
MEC5055, which seems to be compatible with the existing MEC5035 code.
Working:
- Libgfxinit
- USB EHCI debug (left side usb port is HCD index 2, middle port on the
right side is HCD index 1) with the CH347
- Keyboard
- Touchpad/trackpoint
- ExpressCard (tested with USB 3.0 card)
- Audio
- Ethernet
- SD card reader
- mPCIe WiFi
- SeaBIOS 1.16.3
- edk2 (MrChromebox's fork, uefipayload_202309)
- Internal flashing using dell-flash-unlock
Not working:
- S3 suspend: Possibly EC related, DRAM power is getting cut when
entering S3
- Physical wireless switch: this triggers an SMI handler in the vendor
firmware which sends commands to the EC to enable/disable wireless
devices, and has not been reimplemented
- Battery reporting: needs ACPI code for the EC
- Brightness hotkeys: probably EC related
- The system reports that the power button was pressed and shuts down
when the CPU hits around 86 degrees Celsius, before the CPU can
thermal throttle. Likely EC and possibly PECI related.
- Integrated keyboard with upstream GRUB 2.12 payload: Upstream GRUB
initializes the 8042 PS/2 controller in a way that is incompatible
with how the EC firmware emulates it. GRUB tries to initialize the
controller with scan code set 2 without translation, but the EC only
ever returns set 1 scan codes to the system and thus is only works as
an untranslated set 1 keyboard or a translated set 2 keyboard,
regardless of commands to set the scan code. A USB keyboard works
fine.
Unknown/untested:
- Dock
- eSATA
- TPM
- dGPU on non-UMA model
- Bluetooth module (not included on my system)
[1] https://gitlab.com/nic3-14159/dell-flash-unlock
Change-Id: I93c6622fc5da1d0d61a5b2c197ac7227d9525908
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77444
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ia3df14ebd365c00902b5d2ba300d8ade4c2d6c26
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82690
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
Introduce HAVE_SHARED_PS2_PORT Kconfig for this Super I/O to have
mainboards indicate if they have one shared PS/2 port on the rear
panel. On these boards (where a Y-cable cannot allow both
keyboard and mouse to work off the same port), if a PS/2 keyboard is
not present, SIO should be configured to swap its role to mouse, to
allow the OS to find and initialize any mouse connected.
Supporting code will come in a separate patch. Idea is to condition
them on this Kconfig.
Change-Id: I156b15c6ba233cbe8b9ba4d2cfbca6836ad7483a
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82631
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Remove USB configurations and data structures from northbridge
devicetree (SNB+MRC boards) and bootblock/romstage C code
(native-only SNB boards). All USB configurations are drawn from
southbridge devicetree going forward.
Change-Id: Ie1cd21077136998a6e90050c95263f2efed68a67
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81882
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Transfer all USB responsibilities to southbridge/intel/bd82x6x,
using one set of USB port configuration supplied by mainboards
in the southbridge section of their devicetree.
For MRC raminit, export southbridge_fill_pei_data() as a hook for
southbridge code to implement. With new code via this hook, bd82x6x
fills pei_data based on this one set of USB port config.
For native raminit, early_usb_init() now goes directly to the devicetree
and no longer get passed an address to it.
TEST=abuild passes for all affected boards. All USB ports still work
on asus/p8x7x-series/v/p8z77-m.
Change-Id: I38378c7ee0701abc434b030dd97873f2af63e6b0
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81881
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This board has used the USB current map from asus/p8z77-m_pro since it
first landed in coreboot, which actually doesn't match vendor firmware.
Apply values obtained from hardware while running vendor firmware
to both native and MRC config.
Change-Id: I7ce13493c3ecac8154460c1fedf05e2d70a8e394
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82756
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For each sandybridge boards with option to use MRC or native platform
init code, add a copy of the board's USB port config, consolidated between
both code paths, into the southbridge devicetree, using special values
allocated for this consolidation.
These get hooked up in a separate patch.
Change-Id: I53efca3d29b3c5d4d5b7e3d6dc3e6ce6c34201e6
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81880
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This map is found stored in plain text in vendor firmware image.
They will take effect when USB config is transitioned to southbridge
devicetree.
Change-Id: Iab0a225560856771407bb815ff4d8bc95d0f884f
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82755
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
|
|
For mainboards using southbridge/intel/bd82x6x, copy the contents
of mainboard_usb_ports array into southbridge devicetree. In-line
comments are maintained.
Boards also capable of using MRC raminit are done in a separate
patch.
Change-Id: Ia8a967eb3466106f3a34e024260e13d02f449a25
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81879
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Replace 3 unused values in the map with those found during a Ghidra
examination of MRC binary, and on hardwares running vendor firmware
(asus/p8z77-m and HP Z210 CMT Workstation).
The outgoing values were introduced in commit 216ad2170ca8
("sb/intel/bd82x6x: Add new USB currents") in anticipation for
Gigabyte GA-Z77-DS3H mainboard, but effort to land it was eventually
abandoned. Since commit xxxxxxxxxxxx, such values can be placed
directly in the port config, so there should be no hurdle should that
effort be resurrected.
Add a few #defines in pch.h to place some inline documentation
on MRC values, but more will be documented in the future when this
mapping is introduced MRC-side.
Finally, update autoport to match.
Change-Id: I195c7f627994e48f7a6e6698589504dc96248cff
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82754
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
|
|
This is the first step to:
- Move USB port configs, which are static, from C code to devicetree;
- Unify USB port configs between MRC and native code path.
Change-Id: I59af466d41790e2163342cac8676457ac19371ea
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81878
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Incorporate fixed constants and simple data members into struct
pei_data as it gets initialized and make more use of existing helpers.
Compiler zeroes structs set up this way so the memset() is no longer
needed.
Drop northbridge_fill_pei_data() as it gets replaced entirely.
Gut southbridge_fill_pei_data() in preparation for having southbridge
code fill in USB-related members.
This is to make the code easier to maintain, and realizes small savings
in compiled code size too.
Change-Id: I3140cb99b0106669aa27788641c2895ced048e95
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82480
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For USB to work under native code path, the USB port config needs to
include a current setting for each port, which gets mapped to an
initialization value that gets programmed into the USBIRx register
for the respective port. This map resides in early_usb.c.
The need to update it, whenever we see a previously unaccounted for
initialization value, is getting out of hand.
Instead this patch will allow specifying those values, presumably
taken from an inteltool dump while running vendor firmware,
directly in the USB port map.
Because all USBIRx values are always in the 0x20000yyy form, we only
need the lowest 12 bits. We have more than enough space in the USB
port config structure for this.
As the lowest yyy value we saw so far is 0x53, a note is included to
limit the map to not more than 80 entries. Any value that is too big
to be an index into the map is programmed directly, + 0x20000000, into
the registers.
This opens the future possibility to use the map for a simpler
mapping for boards also using MRC, and remove the need for any
mapping at all for the rest.
Change-Id: I3d79b33bac742faa9bd4fc9852aff73fe326de4e
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82655
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
|
|
Skip CSE sync in coreboot when payload is doing it.
BUG=b:305898363
TEST=Verify CSE sync from depthcharge on Screebo
Change-Id: Ifa942576c803b8ec9e1e59c61917a14154fb94b2
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82660
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
|
|
Change-Id: I90fbd7ce0e1c6cd15d73cb73dc774df2de56b346
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82932
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
If the EC doesn't know a value, it will report it as 0xffff. In these
cases, calculate a value to used based on others. For example, if the
EC doesn't know the last full charge capacity, report the design
capacity to the OS.
Change-Id: I310555ff913c2e492bbaec4d77281ac32c0de7a3
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81408
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I559aca98044b7f0e6b08c475b5383c014bb4cd3f
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81407
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Rename the BRPR (Battery Remaining Percentage) to B1RP to match
the format of the other variables.
Change-Id: I64a744d78180156e16dbd483a35c7f97ac84bcba
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81406
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Iccb60d3530227fb71a3ce5a3ab1421627cc86611
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81405
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The BT1T (temperature) and BT1C (control) are not used so remove
them.
Change-Id: Ie6e85042ec59851bcfb4c88a2e04181c3c39f89c
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81404
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The battery remaining percentage is a uint16_t, so correct this in
the EC memory. This change is non-function, as the EC is little
endian.
Change-Id: I56a0ae8199a95c9722e9bcb4c0739f4ef1d6ab05
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81403
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add BIX Method to report extended battery information.
Change-Id: Ie5baecb20c7d4600e0cf1d19ff5f67ce2003fa1d
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81402
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Add wifi sar table support for xol. Bit 31 in CBI/FW_CONFIG
is used to select different sar table (index 0 or 1) but only
0 is in used at the moment.
BUG=b:344274789
BRANCH=firmware-brya-14505.B
TEST=emerge-brya coreboot chromeos-bootimage
Change-Id: Id4dc74c4f2a807d2e531b419ecb7b590d4c32ac2
Signed-off-by: YH Lin <yueherngl@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82945
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Current existing temperature thresholds of TSR1 sensor are set at 60C
to start fan. Due to this CPU gets hot and temperature goes over 80C.
In this situation, fan does not even start to lower down CPU temperature.
With updated new settings based on tuning from thermal team, start fan
early at 40C for TSR0 and TSR1 so the CPU temperature stays below 80C.
BUG=b:339493551
TEST=Built and tested on google/brox board
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Change-Id: I4765c13c10e436733d8c9d017085968daa561ccc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82784
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Change-Id: If43089560a391d6a844ef1716b277e3146c66945
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82861
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
This change restores the EN_PP3300_SSD GPIO configuration in the
ramstage for the Rex0 variant. This is necessary to enable testing
of RO lockdown scenarios on FSI'ed Screbo devices, where bootblock
changes are not applicable.
Additionally, ensures locking the GPIO PAD from getting misconfigured
after booting to OS.
BUG=b/337971452
BRANCH=firmware-rex-15709.B
TEST=Able to boot google/rex with RO locked to an older version without
SSD GPIO refactored, and RW is with the latest revision.
Change-Id: Ia7564b14a20d00e9bb2c9466b7a737dd97f01351
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82909
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Add AX211 and AX203 wifi sar table for pujjoga wifi sar config.
Use fw_config to separate different wifi card settings.
WIFI_SAR_TABLE_AX211: 0
WIFI_SAR_TABLE_AX203: 1
BUG=b:336167281
Test=emerge-nissa coreboot
Change-Id: If0f542cb13e93e99960bf65d616b26cee7617a43
Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82702
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Add FW_CONFIG probe based on pujjoga boxster of below devices:
WWAN
Schematic version: 500E_GEN4S_ADL_N_MB_0418
BUG=b:336167281
TEST=Boot to OS and verify the WWAN devices is set based on
fw_config.
Change-Id: I94cb9ffe47888a8b7b5c6837ddfc390a1d2e77d1
Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82701
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Add bookem new supported memory parts in mem_parts_used.txt.
Generate SPD id for this part.
Zilia SDVB8D8A34XGCL3N3T
BUG=b:344482259
TEST=Use part_id_gen to generate related settings
Change-Id: I1cbf641e2bbe4fd4eea02a1bfa3d6b3c06e567e4
Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82783
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Enable type-c port 0 USB2 function.
BUG=b:327549688
TEST= USE="-project_all project_bujia" emerge-brask coreboot
Change-Id: I0d7adc329a8c26941957d7a7472a5166b07bda5b
Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82903
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add Kconfig strings for the battery:
* Model
* OEM
* Technology
Change-Id: Ibbce87ad54874f490af45c41f31956a7e9e996f3
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81401
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
These values were configured based on a default value of 110, but for
CML, it's actually 100.
Adjust it accordingly.
Change-Id: Ibffeeab67a7277625db9bdedca36d759ff0e72f6
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81414
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Configure the TCC Offset based on the active power profile
Change-Id: I58940441a7cefc7a2a07e5e9f7e8a15cb8730ef3
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81413
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
All other variants use a function and definitions to get the power
profile. Make this board to the same.
Change-Id: I07ce71e20bd71229bb0cd3438ab59140cd0d8b42
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81412
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I27062c38c10df1d03f563b2f5391f79a3b6ee4fe
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81411
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I3eea1a6d5bf652b9d9b430e9cd59ef9a3ea9fe2f
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82408
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
It is now possible to hook up device ops directly to devices in
devicetree which removes the need for a fake chip.
This also fixes Hermes booting as the PCI ops were incorrectly hooked up
to a dummy device. The intel uart driver was requesting a resource from
the generic device and died since it does not exist:
[EMERG] GENERIC: 0.0 missing resource: 10
This was broken in commit b9165199c32a (mb/prodrive/hermes: Rework UART
devicetree entry).
Change-Id: I3b32d1cc52afaed2a321eea5815f2957fe730f79
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82940
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Replace `0x411111f0` with `AZALIA_PIN_CFG_NC(0)`, which evaluates to the
same value and conveys additional information to the reader. Done with a
bulk search and replace operation.
Change-Id: Ibd84daec017bc1ab1ee4edd906fda80231c134cc
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82394
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
This patch introduces support for storing the MRC cache based on the
MRC version for both ADL-N and TWL platforms. It select the
MRC_CACHE_USING_MRC_VERSION option when client SOC_INTEL_ALDERLAKE_PCH_N
is chosen.
BUG=b:296433836
Change-Id: Icc7e4ecd84a7d2818d54acc6ac5d0592544bb9ce
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81038
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Brandon Weeks <bweeks@google.com>
|
|
This patch is to switch Client ADL-N FSP headers to vendorcode from IOT
headers. Also guard IOT headers & bin path with FSP_TYPE_IOT Kconfig.
BUG=b:296433836
TEST=Able to build and boot google/nivviks
Change-Id: I1ffcc3f284c213ff0533de3a0e228aacf523b380
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82781
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Currently, the 3rdparty/fsp submodule contains only the IoT FSP for
ADL-N. However, coreboot's Kconfig is incorrectly applying the IoT
FSP for both Client and IoT configurations, despite the Client FSP
requiring distinct headers.
The CWWK CW-ADL-4L-V1.0 board relies on the FSP provided by the
3rdparty/fsp submodule, which means it has been using the IoT FSP by
default. To ensure the board continues to use the correct FSP as we
plan to introduce Client FSP headers into vendorcode, we are now
explicitly select FSP_TYPE_IOT for the CWWK CW-ADL-4L-V1.0 board.
Change-Id: Ie3844cb24740e4d95ee835a44e55b4d5cb6854e5
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82915
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Brandon Weeks <bweeks@google.com>
|
|
Currently, the 3rdparty/fsp submodule contains only the IoT FSP for
ADL-N. However, coreboot's Kconfig is incorrectly applying the IoT
FSP for both Client and IoT configurations, despite the Client FSP
requiring distinct headers.
The aoostar/wtr_r1 board relies on the FSP provided by the 3rdparty/fsp
submodule, which means it has been using the IoT FSP by default. To
ensure the board continues to use the correct FSP as we plan to
introduce Client FSP headers into vendorcode, we are now explicitly
select FSP_TYPE_IOT for the aoostar/wtr_r1 board.
Change-Id: I68feeaaffd825013ae1012694047b067535e7341
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82914
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
PchPcieClockGating & PchPciePowerGating UPDs are not available for ADL_N
FSP headers. Add guard to Avoid PchPcieClockGating & PchPciePowerGating
programming for ADL_N FSP.
Change-Id: I2f1625038896b07c354498fe431cad97fb9b5bdb
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82917
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Both, the list of IDs that we hooked our driver up to and the list
that we use for VBIOS mapping, had gaps. Fill those.
Change-Id: I97c09bb113cf0f35ae158abbd0ba2632dbad7cad
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82787
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Remove the entries which have the same state as the ones from the
chipset devicetree.
Change-Id: I4981cd835ef28a673d480808dd486fed4d9b45e5
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80043
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The QEMU Bochs display driver and the QEMU Firmware Configuration
interface code (in the qemu-i440fx mainboard dir) were written for x86.
These devices are available in QEMU VMs of other architectures as well,
so we want to port them to be independent from x86.
The main problem is that the drivers use x86 port I/O functions to
communicate with devices over PCI I/O space. These are currently not
available for ARM* and RISC-V, although it is often still possible to
access PCI I/O ports over MMIO through a translator.
Add implementations of port I/O functions that work with PCI I/O space
on these architectures as well, assuming there is such a translator at a
known address configured at build-time.
Change-Id: If7d9177283e8c692088ba8e30d6dfe52623c8cb9
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80372
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Based on lotso EVT schematics add dq map settings.
BUG=b:333494257
TEST=emerge-brox coreboot chromeos-bootimage and boot on
Change-Id: I4f03e8a90522cbf2fe06f4160414202dcc4a2199
Signed-off-by: Jian Tong <tongjian@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82600
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
Reviewed-by: Dengwu Yu <yudengwu@huaqin.corp-partner.google.com>
|
|
This was done using Haswell autoport, with manual fixes to get the
output to build against current main. I do not physically have this
board; I was sent the output of autoport with some fixes on top of
which I added additional changes. The VBT was copied from
/sys/kernel/debug/dri/0/i915_vbt on version 2.70 of the vendor firmware.
The flash chip is 8MiB in a socketed DIP8 package, making it easy to
externally flash to recover from a brick.
Working:
- Haswell MRC.bin
- S3 suspend and resume
- Libgfxinit
- HDMI
- DVI-I (including passive DVI to VGA adapter)
- DisplayPort
- SATA ports
- mSATA SSD
- mPCIe WiFi slot
- Rear USB ports
- USB 3.0 header
- Audio header
- Ethernet
- x16 PCIe slot
- EHCI debug with the CH347 (top USB 2.0 port by the PS/2 connector)
- edk2 (MrChromebox uefipayload_202309)
Not Tested:
- PS/2 keyboard/mouse
- eSATA
- USB 2.0 header
Change-Id: I56c22d8f5505f9a4da25f8b4406b00978af1a586
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81022
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I98aa3f582963f76690f907b678ac322ed4cc99d1
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82846
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I972516443bc57e193aefd54516ca994087d92054
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82844
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
This patch flips the polarity of CONFIG_USE_1G_PAGES_TLB into
CONFIG_NEED_SMALL_2MB_PAGE_TABLES which is off by default, meaning
CPUs added in the future will automatically build the smaller 1GB pages.
We can expect support for this feature to be available on all future CPU
generations (with the possible exception of embedded edge cases), so
this default setting should make mistakes less likely and keep
maintenance effort lower. (Besides, enabling the support where it
doesn't work fails fast, whereas keeping it disabled where it could work
is an inefficiency that can easily go overlooked for a long time.)
While this is technically a CPU feature, not a northbridge feature, we
support a lot more individual CPUs than northbridges in the pre-SoC era,
and they tend to be closely coupled anyway. So select the option at the
northbridge level for older CPUs to keep things simpler.
Change-Id: I2cf1237a7fb63b8904c2a3d57fead162c66bacde
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82792
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Based on lotso EVT schematics update gpio settings.
BUG=b:333494257
TEST=emerge-brox coreboot chromeos-bootimage and boot on
Change-Id: I13485cc7ccd8b15352f5e21ad9336aa2b3d35749
Signed-off-by: Jian Tong <tongjian@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82573
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Shelley Chen <shchen@google.com>
|
|
ARM SoC supports FEAT_CCIDX after ARMv8.3. The register field
description of CCSIDR_EL1 is different when FEAT_CCIDX is implemented.
If numsets and associativity from CCSIDR_EL1 are not correct, the system
would hang during mmu_disable().
Rather than assuming that FEAT_CCIDX is not implemented, this patch
adds a check to dcache_apply_all to use the right register format.
Reference:
- https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/12770
BUG=b:317015456
TEST=mmu_disable works on the FEAT_CCIDX supported SoC.
TEST=manually add mmu_disable to emulation/qemu-aarch64/bootblock.c and
verify with the command
qemu-system-aarch64 -bios \
./coreboot-builds/EMULATION_QEMU_AARCH64/coreboot.rom -M \
virt,secure=on,virtualization=on -cpu max -cpu cortex-a710 \
-nographic -m 8192M
Change-Id: Ieadd0d9dfb8911039b3d36c9419af4ae04ed814c
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82635
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Based on schematic, update slot number for PCIe port used for NIC
controller.
Change-Id: I7a1ead8f7e4588db45303041e60dbfe27ee12ea7
Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82899
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
|
|
There's two copies of the `get_cxl_mode()` function to map the OCP VPD
value to the values expected by platform code. As this is unnecessary,
have a single copy of this function in the OCP VPD driver code. As the
`get_cxl_mode()` function is Xeon-SP only, keep it in a separate file.
This change simplifies things for boards using OCP VPD for CXL and has
no impact for boards *not* using OCP VPD:
- Boards not using OCP VPD can still define get_cxl_mode() in mainboard
code as needed, just like they were able to do before.
- Boards using OCP VPD but without CXL (`SOC_INTEL_HAS_CXL` is not
enabled), this code won't get compiled in at all (see `Makefile.mk`).
- Boards using OCP VPD and CXL will automatically make use of this
`get_cxl_mode()` definition, which should be the same for all boards.
It is possible that this may need to be expanded/adapted in the future,
which is easy to handle in a follow-up commit when the need arises.
TEST=Build and boot on intel/archercity CRB
Change-Id: I935c4eb5b2392e2d0dc01b9f66d46c79b8141ea7
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82224
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
POSTCAR_STAGE is already selected in XEON_SP_COMMON_BASE
Change-Id: I3f94e6cc76c8f376119ffa8ec43fa1a43fb40977
Signed-off-by: Jincheng Li <jincheng.li@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82795
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Set GSC_SOC_INT_ODL to GPP_A17 instead of GPP_A13.
BUG=b:333486830
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot
Change-Id: I065fdf2a66036c6df1e16dda3b2a684b5202cccc
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82717
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ib8f7ac7e586390a1d25cbe84d6d4c3ba31ff078f
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82843
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
Change-Id: I950b8859b51fb61edc0cf1115f6665378bc0b836
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82887
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I50e874790dedcb6bf3b3ac8368821f22611aa3b7
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82894
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Set LpDdrDqDqsReTraining to 1 for xol. Value 0 will cause black screen
issue.
Reference: https://review.coreboot.org/c/coreboot/+/79527
> FSP default value for LpDdrDqDqsReTraining is 1. For boards
> that didn't set LpDdrDqDqsReTraining to any value, 0 was being
> assigned and it caused black screen issue.
BUG=b:332980211
BRANCH=brya
TEST=Built and verified there is no black screen issue during power
on/off test for over 100 cycles.
Change-Id: Ia346ce559b4509ea1a63abe28b12ad909f9b7b0d
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82778
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Due to system spec change, change audio codec ALC5650 to ALC5682I-VS
BUG=b:329787697
TEST= USE="-project_all project_bujia" emerge-brask coreboot
Change-Id: I38e5c58b3ef3fbe709b98601975ae3821bb77213
Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82774
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Update generated FSP headers for Alder Lake N from v5021.00
Changes include:
- Add FspProducerDataHeader.h header file
- Open Usb4CmMode & CnviWifiCore Upd in FspsUpd.h
- Update UPD Offset in FspsUpd.h
BUG=b:296433836
TEST=Able to build and boot google/nivviks
Change-Id: Ieb4cc8f2f83d8f6e821894f0ec2e56262a25743c
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82780
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
This reverts commit 79503ef515967ffceab7bd2a16a381e6a02c3d30.
The Intel FSP repository at https://github.com/intel/FSP.git currently
lacks the Client ADL-N headers. The existing coreboot code references
the "IoT/AlderLakeN/" directory for these headers, but it is missing the
crucial FspProducerDataHeader.h file. Without this header, the ADL-N
platform is unable to utilize the appropriate MRC version needed for
updating MRC caches. This patch aims to restore the necessary FSP
headers for the ADL-N platform within the vendorcode directory.
Change-Id: I99e9d5a07b4ca8d1666e3fd50d3d363ed5d4618e
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82779
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Change-Id: I5e67e370d4eb8fe28227843bbca34db06ad84b26
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82786
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The Razer Blade Stealth Kaby Lake has 2 variants. One is the H2U
variant, as originally committed, with the SKU number RZ09-01962, also
known as the 2016 model, and the H3Q model with SKU numbers RZ09-01963
and RZ09-01964, known as the Mid 2017 model. This commit adds support
for the H3Q model. With respect to coreboot, there are few known
differences:
1. Only the H2U has TPM.
2. The USB ports are different.
3. The screen size (and therefore VBIOS Table) is different.
4. The hda_verb is very slightly different.
5. The gpio is different.
Change-Id: I493a651e52c2eb938daa67a05e9caaa784020fa4
Signed-off-by: Reagan Bohan <xbjfk.github@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82506
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Apply commit c6b65c1a811e ("soc/intel/alderlake: Enable USB2 port reset
message on Type-C ports") to Meteor Lake.
This change is added to address the issue of USB3 ports downgrading to
high speed during low power modes and not returning back to super speed.
The patch enables port reset event on USB2 ports. This event is
is passed to USB3 upstream ports to upgrade back to super speed (USB3)
after a downgrade during low power state.
Change-Id: Iac702a8d8edd2b3b7e03abcac020be7e45335821
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82730
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I1ed280c1e62e0f094fd40d2165892240f76de390
Fixes: 29f1b791270b ("mb/system76/rpl: Add Adder WS 4 as a variant")
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82725
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Ensure per-board smart amp init is configured. Fixes speaker output on
oryp12.
Change-Id: I40ff1889dd144bf83ef85979a55535493aa7abdd
Fixes: 8b9716e2269d ("mb/system76/rpl: Add Oryx Pro 12 as a variant")
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82726
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
|
|
Change-Id: I55f2730f7277a3c699b86ded5864e9690d92d518
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82700
Reviewed-by: Jeremy Soller <jeremy@system76.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The comment that the PchHdaAudioLink UPDs only configure GPIOs is
incorrect. Setting this to 1 is needed to enable HDA audio link.
Same exact situation as with Alder Lake in CL 71715.
Change-Id: Iecbe106ae18b5a8b53c04a5335a4e4c4ae27c7a0
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82685
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Crawford <tcrawford@system76.com>
|
|
Initial commit is a copy of ec/system76/ec from tag v24.02.1 (commit
0a280ff7) with string changes. Dasharo-specific features will be added
in subsequent commits, similar to how Librem EC support was added in
changes 52390 and 52391.
Change-Id: Ic7c3d9413488026548514963eb78accc28e41e06
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82671
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
coreboot needs to figure out top of memory to place CBMEM data. On some
non-x86 QEMU virtual machines, this is achieved by probing the RAM space
to find where the VM starts discarding data since it's not backed by
actual RAM. This behaviour seems to have changed on the QEMU side since
then, VMs using the "virt" model have started raising exceptions/errors
instead of silently discarding data (likely [1] for example) which has
previously broken coreboot on these emulation boards.
The qemu-aarch64 and qemu-riscv mainboards are intended for the "virt"
models and had this issue, which were mostly fixed by using exception
handlers in the RAM detection process [2][3]. But on 32-bit RISC-V we
fail to initialize CBMEM if we have 2048 MiB or more of RAM, and on
64-bit RISC-V we had to limit probing to 16383 MiB because it can run
into MMIO regions otherwise.
The qemu-armv7 mainboard code is intended for the "vexpress-a9" model VM
which doesn't appear to suffer from this issue. Still, the issue can be
observed on the ARMv7 "virt" model via a port based on qemu-aarch64.
QEMU docs for ARM and RISC-V "virt" models [4][5] recommend reading the
device tree blob it provides for device information (incl. RAM size).
Implement functions that parse the device tree blob to find described
memory regions and calculate the top of memory in order to use it in
mainboard code as an alternative to probing RAM space. ARM64 code
initializes CBMEM in romstage where malloc isn't available, so take care
to do parsing without unflattening the blob and make the code available
in romstage as well.
[1] https://lore.kernel.org/qemu-devel/1504626814-23124-1-git-send-email-peter.maydell@linaro.org/T/#u
[2] https://review.coreboot.org/c/coreboot/+/34774
[3] https://review.coreboot.org/c/coreboot/+/36486
[4] https://qemu-project.gitlab.io/qemu/system/arm/virt.html
[5] https://qemu-project.gitlab.io/qemu/system/riscv/virt.html
Change-Id: I8bef09bc1bc4e324ebeaa37f78d67d3aa315f52c
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80322
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
This reverts commit b3db3abd6311924930f3250c9f9fc3157fbbf7da.
Reason for revert: `Wcalloc-transposed-args` is new command option came with GCC-14. older versions will not support it.
Change-Id: I74ef8de1f7d38e1e0519c3b41e79fd9b11d8e16f
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82759
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Obviously one should return NULL if a FDT is not valid an not the other
way around.
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: I77c0e187b841e60965daac17025110181bdd32bc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82773
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Change-Id: Ibe551a4c83f416ba30326077aa165818cf79c1fd
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82648
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
- Add Rex64 board to Kconfig menu
- Enable building for Rex64 with x86_64 support
Change-Id: I02e2c49b4aeb2cb98d9d0cb66717db18c3f96d45
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82625
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
The crashlog code in intel/common/block and meteorlake soc
was casting integer addresses directly to pointer types,
which caused compilation errors in x86_64 bit builds.
This commit fixes the issue by using uintptr_t for casting
integer addresses to pointer types before dereferencing.
BUG=b:329034258
TEST=Successfully build Meteor Lake (rex) in both x86_32 and
x86_64 modes.
Change-Id: I2d0814a8b767270ec140341bfb51d0782469545d
Signed-off-by: Appukuttan V K <appukuttan.vk@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82481
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Update used USB port[2][3](type-a) setting for nova.
BUG=b:328711879
TEST=emerge-constitution coreboot chromeos-bootimage
Change-Id: I63cf97b23627feac05743f2a6e514a33fcaf7dff
Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82703
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
|
|
For multi-SKU/SoC supports, IIO domain layouts are returned from FSP
HOBs. Add _OSC ASL generation utils so that static IIO domain layout
definition file per SKU/SoC are not needed any more.
The _OSC generation codes is a thin AML generation layer which
further invokes \_SB.POSC which is defined in ASL. The ASL handler
is able to handle boot-time generated info as parameters while keeps
good readability for the ease of maintenance. In this case, firmware
granted capabilities are calculated in boot time and passed to ASL
handler as parameters.
TEST=Build and boot on intel/archercity CRB
Change-Id: Ibd3bfa2428725fe593754436d5ed75a3a11b4cdc
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82034
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
|
|
This commit removes config guard around FSPM_ARCH_UPD from the
FspApi.h header file. This change is done to ensure
that this header file can be used with both x86_32 and x86_64
architectures and also with different FSP specification versions.
The following modifications are made:
- Removes PLATFORM_USES_FSP2_X86_32 config guard around
FSPM_ARCH_UPD, this was added to isolate the structure from
x64 build. This is not really required since the x64 build uses
FSP2.4 structures.
BUG=b:343428206
TEST=Verified x86_32 and x86_64 builds on Meteor Lake board (Rex)
Change-Id: Idc849de73723036323f81dfd055730f6669cd52e
Signed-off-by: Appukuttan V K <appukuttan.vk@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82425
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
The devicetree entry and gpio.c updated as per the schematics of Trulo
to map the OC fault signals from A0/A1 USB ports.
BUG=b:335858378
TEST= Able to build google/trulo
Change-Id: Ic17debc5eecebca8c000c43a660e1b52d2932f2a
Signed-off-by: Pranava Y N <pranavayn@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82637
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
|
|
EnableMultiPhaseSiliconInit upd is deprecated and has been
removed starting with v2.4 of FSP specification. Multi-phase
silicon initialization is mandatory for all FSP implementations
compliant to v2.4.
The following modifications are made:
- In fsp_params.c and silicon_init.c EnableMultiPhaseSiliconInit
update is guarded so that it will get included only if FSP2.4
is not selected.
BUG=b:329034258
TEST=Verified x86_32 and x86_64 builds on Meteor Lake board (Rex)
Change-Id: Icdbf3bacc0a05975fc941b264fd400d74f506fce
Signed-off-by: Appukuttan V K <appukuttan.vk@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82699
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
