| Age | Commit message (Collapse) | Author |
|---|
|
Currently FSP-M does not implement the spec completely, e.g it is unable
to use user-provided heap location in CAR. While this is being resolved,
this workaround is a stop-gap solution that allows multi-socket usage.
TEST=tested on OCP Sonora Pass EVT and Intel Cedar Island CRB
Change-Id: Ia2529526a8724cf54377b0bd2339b04fa900815a
Signed-off-by: Andrey Petrov <anpetrov@fb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40555
Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add a dummy implementation (currently FSP defaults are meant for CRB).
It is needed only to prevent build breakage.
Change-Id: I67b1a693886a29bdaf23f1f3f249da52ba65451a
Signed-off-by: Andrey Petrov <anpetrov@fb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40553
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
|
|
We need to allow motherboards to configure certain parameters that
are specific to it. Hence, invoke this function. Also, provide a
weak motherboard implementation that does nothing.
Change-Id: Ifa2824811273236a66e742404856fbe17d4cf496
Signed-off-by: Andrey Petrov <anpetrov@fb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40552
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
It's supposed to be selected by default on devices that ship with the
device, while there's little need to add it on other devices.
Change-Id: I57badee9ce1e8a3c8df313953aba02cc3489ff97
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40660
Reviewed-by: Michael Niewöhner
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
It's supposed to be selected by default on devices that ship with the
device, while there's little need to add it on other devices.
Change-Id: I2747c4f825601b2fbffc908821035e4f66c5a3b8
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40659
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
1) Allows MKBP events from the EC to wake the system from suspend states.
2) Remove EC_HOST_EVENT_MKBP from the EC_SCI_EVENTS mask, so that MKBP
events don't generate an SCI. The EC is also being changed to use host
events to wake up the system, and use the EC_INT_L line for MKBP IRQ
signalling. Otherwise, there would be two IRQs generated for MKBP events.
BUG=b:148976961
BRANCH=firmware-hatch-12672.B
TEST=Verify MKBP events wake system
TEST=Verify MKBP IRQs are run
Change-Id: I8420a996cb1975007cbbbefe9e2f8f1fca91b666
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38735
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Shelley Chen <shchen@google.com>
|
|
I2C0&1 are either not available or not functional. Add place holders
instead, so that the array index matches the I2C controller number. I2C4
is slave device only, so do not initialize it as I2C host controller.
Also do some slight refactoring.
BUG=b:153152871
BUG=b:153675916
Change-Id: I397b074ef9c14bf6a4f6680696582f5173a5d0d3
Signed-off-by: Martin Roth <martinroth@chromium.org>
Signed-off-by: Paul Ma <magf@bitland.corp-partner.google.com>
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1897071
Reviewed-on: https://chromium-review.googlesource.com/2057468
Reviewed-on: https://chromium-review.googlesource.com/2094855
Reviewed-on: https://chromium-review.googlesource.com/2149870
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40247
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add acpigen methods which generate operations to get/set/clear RX/TX GPIOs.
Verify it matches https://doc.coreboot.org/acpi/gpio.html.
BUG=b:149588766
TEST=confirmed with touchscreen gpios.
Signed-off-by: Alex Levin <levinale@chromium.org>
Change-Id: Id9fe26f14a606ceedb9db02d76fe8d466d3a21af
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40550
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Jes Klinke <jbk@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Remove double space and limit lines to 96 column.
BUG=N/A
TEST=Build and boot Facebook fbg1701
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Change-Id: Ib6373bbf9b666540304e8a2bdaa9add9914476bc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40528
Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:154071868
BRANCH=none
TEST=builds
Change-Id: I9c602476a80a97438af01e3c48fac385532373a4
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40510
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Daniel Kurtz <djkurtz@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Copy over DPTF parameters from Puff.
BUG=b:153589525
BRANCH=none
TEST=none
Change-Id: Ic619826205be06f30055fbbc537f3d302dd039bd
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40423
Reviewed-by: Sam McNally <sammc@google.com>
Reviewed-by: Daniel Kurtz <djkurtz@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Chen <tim-chen@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Copy over DPTF parameters from Puff.
BUG=b:153589525
BRANCH=none
TEST=none
Change-Id: I7270db1283a9c0ee4746da038020e432aeb6dc5e
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40422
Reviewed-by: Sam McNally <sammc@google.com>
Reviewed-by: Daniel Kurtz <djkurtz@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Chen <tim-chen@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The device is always there, the Chromium OS configs always enable it,
so let's mirror that here for a better out of the box experience.
Change-Id: Ia2073ee7ecbdb37473e1f1002bc9ae0f7df58e42
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40657
Reviewed-by: Michael Niewöhner
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The device is always there, the Chromium OS config always enables it,
so let's mirror that here for a better out of the box experience.
Change-Id: Ic43a314aaed635ae2943df02abc5d163cc3c4ffd
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40658
Reviewed-by: Michael Niewöhner
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I5bb1a819475383719dbda32d9b5fea63da1e6713
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40611
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I9ebba0ee9e59cb7d18b5ce89b048f591a4402543
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40613
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Switch USB2 port1 and port3 for duffy and kaisa due to circuit change.
BUG=b:153682207, b:154451230, b:154445635
BRANCH=None
TEST=emerge-puff coreboot chromeos-bootimage
boot on puff board
Change-Id: I9c0cbcbefd045085fb70cf4f41869ab9b98103c4
Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40301
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
When CONFIG_SEPARATE_VERSTAGE=n, all verstage code gets linked into the
appropriate calling stage (bootblock or romstage). This means that
ENV_VERSTAGE is actually 0, and instead ENV_BOOTBLOCK or ENV_ROMSTAGE
are 1. This keeps tripping up people who are just trying to write a
simple "are we in verstage (i.e. wherever the vboot init logic runs)"
check, e.g. for TPM init functions which may run in "verstage" or
ramstage depending on whether vboot is enabled. Those checks will not
work as intended for CONFIG_SEPARATE_VERSTAGE=n.
This patch renames ENV_VERSTAGE to ENV_SEPARATE_VERSTAGE to try to
clarify that this macro can really only be used to check whether code is
running in a *separate* verstage, and clue people in that they may need
to cover the linked-in verstage case as well.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I2ff3a3c3513b3db44b3cff3d93398330cd3632ea
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40582
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This patch restores the permission check for the kernel space which
was dropped when read_space_kernel was moved from Depthcharge by
CL:2155429.
BUG=chromium:1045217, chromium:1020578
BRANCH=none
TEST=none
Signed-off-by: dnojiri <dnojiri@chromium.org>
Change-Id: If6d487940f39865cadc0ca9d5de6e055ad3e017d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40579
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Romstage is now where software sync is performed for chromebooks.
EFS2 has been ported to romstage from Depthcharge. Puff should
follow.
This patch enables CONFIG_EARLY_EC_SYNC and disables
CONFIG_VBOOT_EC_EFS. EFS2 will be done in romstage.
BUG=b:147298634, chromium:1045217
BRANCH=none
TEST=Verify software sync succeeds on Puff.
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Change-Id: I8d7c25f8281496c7adb282f5d4e0fc192d746e3e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40390
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change adds a helper function dev_find_matching_device_on_bus()
which scans all the child devices on the given bus and calls a
match function provided by the caller. It returns the first device
that the match function returns true for, else NULL if no such device
is found.
Change-Id: I2e3332c0a175ab995c523f078f29a9f498f17931
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40543
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change enables support for generating ACPI nodes for I2C tunnel for
any GOOG0012 device that is sitting behind the Chrome EC. It accepts a
config "remote_bus" which allows mainboard to configure the id of the
remote bus that is being tunneled.
BUG=b:154290952
BRANCH=None
TEST=Verified that SSDT node for I2C tunnel behind Chrome EC is
generated correctly.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: Icfc0ec3725d7f1d20bcb5cb43a0a23aac72bf4eb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40515
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Add keymaps for keys that are not present in US keyboards.
Change-Id: I1ad4c483e81438456533b4c071a4a56cbee88f9c
Signed-off-by: Rajat Jain <rajatja@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40542
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This change adds scan_static_bus() as .scan_bus() callback for Chrome EC
device which allows scanning of devices sitting behind the EC using
the topology provided by mainboard's devicetree.cb.
BUG=b:154290952
TEST=Verified with follow-up changes that devices behind EC are scanned
correctly.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: Id3630db56774fba1e3fc53bf349588c4c585773b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40514
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In ACPI tables, Chrome EC device (CREC - HID GOOG0004) is a child of
EC device (EC0 - HID PNP0C09). However, in coreboot device tree, there
is no separate chip/device for EC0. Thus, acpi_name() needs to return
EC0.CREC as the ACPI name for the Chrome EC device. By returning the
ACPI name as EC0.CREC, all devices that live under Chrome EC device
can simply call acpi_device_path()/acpi_device_scope() to emit the
right path/scope.
In the future, if we ever add a special chip driver for handling EC0
(HID PNP0C09), then the ACPI name for Chrome EC can be fixed to return
CREC.
BUG=b:154290952
TEST=Verified that acpi_device_path()/acpi_device_scope() return the
correct name for Chrome EC device.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: Iec4b0226d1e98ddeb0f8ed8b89477fc4f453d221
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40513
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change adds a helper function to find PCI device with dev# and
function# behind a PCI-to-PCI bridge device.
BUG=b:153858769
BRANCH=None
TEST=None
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: Ie5672b35cda66431a0f1977f217bdf61d3012ace
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40474
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change checks to ensure that device/path passed into any of the
functions in device_const.c is not NULL. Since NULL is not expected to
be passed into these functions, this change adds a die() call in case
the assumption is broken.
Change-Id: I1ad8d2bcb9d0546104c5e065af1eeff331cdf96d
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40475
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The EDID and command sequence are from BOE, the vendor.
BUG=b:148997748
TEST=Boots on Chromebook Kakadu and displayed developer firmware screen successfully.
Change-Id: Ieb510cb28882afc5b8023c2a57b31187e4a09fbd
Signed-off-by: Scott Chao <scott.chao@bitland.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40396
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Some PCI peripherals, such as discrete VGA adapters, require a great
amount of memory mapped IO. This patch allows the user to select at
build time the bottom IO to leave enough space for such devices.
We cannot calculate this value at runtime because it has to be set
before the PCI devices are enumerated. 0x80000000 has been successfully
boot-tested on A88XM-E (fam15tn), G505S (fam15tn) and AM1I-A (fam16kb).
Signed-off-by: Mike Banon <mikebdp2@gmail.com>
Change-Id: Ie235631231bcb4aeebaff2e0026da2ea9d82f9d0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38472
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
|
|
USB routing has changed on reference schematics after Puff rev1 has
built. This may confuse people trying to c&p devicetree from the Puff.
So add comment to clearly note that there was change, hopefully
preventing c&p errors.
BUG=b:153682207
BRANCH=None
TEST=None
Signed-off-by: Kangheui Won <khwon@chromium.org>
Change-Id: I5c43a5c04c81b6708c9eeabc48ef11961d7c8561
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40546
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
SMBus uses 7-bits address, change it from 8-bits to 7-bits.
BUG=b:151702387
TEST=Check Memory SPD data is correct in console log.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I1720b4d6aa0bc785ad86234b3523bb0676ec5c82
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40519
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Deltan will be using the integrated Intel GbE for LAN
functionality. Deltaur will not have a LAN port, and so does not need
the GbE region. This patch adds a new FMAP descriptor file which
explicitly supports the GbE region (chromeos-gbe.fmd), and removes the
GbE region from chromeos.fmd. Deltan is then assigned chromeos-gbe.fmd,
and Deltaur is assigned chromeos.fmd.
BUG=b:150165131
TEST=emerge-deltaur coreboot chromeos-bootimage
and use ifdtool -p tgl -t image-delta{ur,n}.bin to make sure FMAP aligns with IFWI
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Ib93d5ba7f8dbf273ba7c1163022661ede1f44ab4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40501
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Add Type-C subsystem power management support for RTD3.
BUG=b:140290596
TEST=Include "tcss.asl" in platform "dsdt.asl" for coreboot build
with the firmware CM. Added acpi debug and booted to kernel. Probed
devices PM_STATE transition from D0 to D3 entry/exit while system at S0.
TBT PCIe root ports: 00:07.0/00:07.1/00:07.2/00:07.3, offset:0xA4, PM_STATE:D3HT.
xhci:00:0d.0, offset:0x74, PM_STATE:D0D3.
dma:00:0d.2/00.0d.3, offset:0x84, PM_STATE:PMST.
Verified xhci/dma/pcie root ports power runtime_status to be suspended and suspended
time tick through /sys/bus/pci/devices/bus:device:func/power.
Change-Id: I127d3700ad426a44639ee93b4477be6638b42e1b
Signed-off-by: John Zhao <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39785
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
The WDB (Write Data Buffer) is a data region in CAR, used as a
scratchpad in the read and write training algorithms of memory
initialization. Both SNB and IVB use this buffer, but HSW does not.
Unlike earlier chipsets, Haswell contains much more in-hardware memory
training machinery, known as REUT (Robust Electrical Unified Testing).
Among other changes, the REUT hardware has a pattern storage buffer,
which renders the need for a pattern storage buffer in CAR obsolete.
Deprecate the WDB-related parameters in the pei_data structure for
Haswell, as they are leftovers from the previous generation's MRC.
Remove them from the mainboards, and explain why they are not required.
Because the MRC ABI has to remain the same, the layout of pei_data must
not be changed, so rename the WDB parameters instead of deleting them.
Tested on Asrock B85M Pro4, still boots with the MRC from Google Wolf.
Change-Id: I7acc9353a22f8c6f9fe6407617162f35849a79dd
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40406
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Add I2C functionality in coreboot.
Change-Id: I61221ffff8afe5c7ede5abb9e194e242ab0274d8
Signed-off-by: Roja Rani Yarubandi <rojay@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36830
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This implements the SPI driver for the QUP core.
Change-Id: I86f4fcff6f9537373f70a43711130d7f28bd5e09
Signed-off-by: Roja Rani Yarubandi <rojay@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36517
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This implements the UART driver in SoC
Developer/Reviewer, be aware of this patch from Napali:
https://review.coreboot.org/c/coreboot/+/25373/78
Change-Id: I6494daa108197c030577ac86dab71f9ca6c21bdb
Signed-off-by: Roja Rani Yarubandi <rojay@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35500
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
UART driver requires firmware loading
Developer/Reviewer, be aware of this patch from Napali:
https://review.coreboot.org/c/coreboot/+/25372/78
https://review.coreboot.org/c/coreboot/+/27483/58
Change-Id: I4d91dd10488931247f81a87b0bdcc598f4bceb31
Signed-off-by: Roja Rani Yarubandi <rojay@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35499
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
The frequency to be used by UART client is 7.3728MHz, thus define it in
the clock header to be used by the driver.
Tested: UART frequency request by client driver.
Change-Id: I1ced350fe9826ea05b03ffc11aced2c21fe85c9e
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40329
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Enable Wifi and Bluetooth for Jasper Lake RVP with following changes:
1. Enable related pci root ports for WLAN and BT
2. Disable unused root ports and clkreq for unused clocks
3. Configure GPIOs properly for M.2 port
BUG=None
BRANCH=None
TEST=Code compiles and able to detect Wifi/BT module on board.
Change-Id: Ifbd07022c05769c04ecd49c81a4430947125b32a
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39933
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
M.2 WWAN interface has GPIOs which requires coreboot to
configure all related GPIOs as per board schematics.
BUG=None
BRANCH=None
TEST=code compiles and WWAN device is detected in OS
Change-Id: I8ad978a619b50e16ad754177f1eb05cf7670b79f
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39877
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
Each physical port should have the same group and position for both USB2
and USB3, but puff and its variants use different layout than the
baseboard so they must override PLD.
Ports are split into two groups for front and back, with positions in
each group numbered from left to right.
BUG=b:151579409
BRANCH=none
TEST=PLD_GroupToken and PLD_GroupPosition are set as expected in SSDT.
Change-Id: Ibe19e4faa1fbc7117687d789e9bd5584852a48c0
Signed-off-by: Peter Marheine <pmarheine@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40516
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Query the EC to get the top row layout, and if it provides one,
generate the SSDT for the PS2 keyboard.
Signed-off-by: Rajat Jain <rajatja@google.com>
Change-Id: I75d2eee32c82b9bee73436b08b5f615d1b388148
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40032
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add a wrapper command for the subject command
Signed-off-by: Rajat Jain <rajatja@google.com>
Change-Id: I29a4021c2ea0d1cbb4a72f56bf2232d8f9c80ac3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40313
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Add new file to generate ACPI _DSD code for PS2 keyboards. The
following 2 device properties are generated as needed:
function-row-phymap: A list of ordered scancodes for function row.
linux,keymap: Symantically, this is an array of "scancode,keycode"
tuple entries. Each entry teaches linux the keycode corresponding
to a scancode.
Signed-off-by: Rajat Jain <rajatja@google.com>
Change-Id: I5ee05173106a125793e91c263610731543c85472
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40031
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
There have been two cases of incompatibilities between overlapping
changes, and they need to be resolved in a single commit to unbreak the
tree:
1. CB:40389 introduced a new use of write_secdata while CB:40359 removed
that function in favor of safe_write.
Follow the refactor of the latter in the code introduced by the former.
2. CB:39849 changed google_chromeec_get_usb_pd_power_info()'s interface
and adapted all its users. Except for duffy and kaisa which were only
added in CB:40223 and CB:40393 respectively, so reapply the patch to
puff's mainboard.c to their mainboard.c files.
Change-Id: Ib8dfcd61bb79e0a487eaa60e719bd93561f2d97a
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40518
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
This patch adds psys_pmax calculation. There are two types of power
sources. One is barrel jack and the other is USB TYPE-C. The voltage
level is fixed for a barrel jack while TYPE-C may vary depending
on power ratings. We need to get voltage information from
EC and calculate correct psys_pmax value. The psys_pmax needs to be
set before FSP-S since FSP-S will handle the setting passing to pcode,
so move the routine ahead to variant_ramstage_init.
BUG=b:151972149
TEST=emerge-puff coreboot chromeos-bootimage
check firmware log and ensure psys_pmax is passed to FSP
check the data from dump_intel_rapl_consumption in the OS and
ensure the power data is close to an external power meter.
Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com>
Change-Id: I8ea01f856411e05a533489280fc2b4a46a1440c5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39850
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
|
|
This is a micro ATX board with a LGA1155 socket and two DDR3 DIMM slots.
Porting was done using autoport and then doing a bunch of manual edits.
Actually, I have the PLUS variant, but they use the same PCB. The only
difference is the capacitor quality.
Working:
- Both DIMM slots
- PS/2 keyboard
- S3 suspend/resume
- Rear USB ports
- Integrated graphics (libgfxinit)
- VGA
- All PCIe ports
- Realtek GbE (coreboot must set the MAC address)
- SATA ports
- Native raminit
- Flashing with flashrom
- Rear audio output
- VBT
- Arch Linux using CorebootPayloadPkg
Untested:
- PS/2 mouse
- The other audio jacks
- EHCI debug
- Front USB headers
- Non-Linux OSes
Change-Id: I385ee72673202d896041209ff2911995307cb6af
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39099
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Update memory topology for spd info. Deltan supports SODIMM and
Deltaur supports MEMORYDOWN.
BUG=b:151702387
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: If314894325d6f222807030a36f8c4cefecfe5bd3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40486
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This patch adds voltage and curent parameters in
google_chromeec_get_usb_pd_power_info and remove power parameter. Caller could
use the voltage and current information to calculate charger power rating.
The reason for this change is, some applications need the voltage information
to calculate correct system power eg PsysPmax.
BUG=b:151972149
TEST=emerge-puff coreboot; emerge-fizz coreboot
Change-Id: I11efe6f45f2f929fcb2763d192268e677d7426cb
Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39849
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
|
|
Remove explicit setting of iDisp Link parameters. These settings are
related to configuration for the link between HD-Audio controller and
Display unit for purposes of HDMI/DP Audio playback. During PO,
observed that without setting these params display part was not
binding. With the latest code verified that we dont need to explicitly
set these parameters anymore. HDMI/DP audio playback works fine with
default settings.
BUG=b:151451125
BRANCH:none
TEST= build and boot volteer/ripto and verify HDMI/DP audio playback
Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Change-Id: Ie003d119918d363e2ff9172936b70416fd73c7f4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40263
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Jairaj Arava <jairaj.arava@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Changing the local pointer "start" has no effect.
Changing the value it points to has.
Change-Id: I1b689896fcf255b795b27d7a7163849d6dfdb00e
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40506
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
All variants will use the same lid/thermal-polarity config as a result,
which looks the same for all recently boot-tested variants anyway.
Change-Id: Iaaae4eae41ab0037e72375b255d9d1c3eca8d383
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39905
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
H1 uses I2C3 in the HW schematics and connects to GPP_H6 and GPP_H7.
Previous setting was wrong so correct it.
BUG=b:150165131
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I43c18baea66b927d51689579a40a53f72b94ef36
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40487
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:154279851
TEST=none
Change-Id: Ibb56d97d5180ab199c52119135f7eff265908667
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40494
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Change-Id: Ib45e93faebc2d24389f8739911419dfec437bd59
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40505
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This patch adds _DSM Method in LPIT table for entering and exiting
S0ix. This method get injected into DSDT table and called from kernel.
LPIT table is hardcoded in this patch but the proper way to implement
is to use inject_dsdt to make the _DSM methods available for soc's to
implement.
Calling the LPIT table from mainboard here so that with the current
implementation the platforms which do not have lpit support throw
compilation error.
BUG=b:148892882
BRANCH=none
TEST="BUILD"
Signed-off-by: Venkata Krishna Nimmagadda <venkata.krishna.nimmagadda@intel.com>
Change-Id: Ib58f2e33a33bac9cc5f6aca28e85a8066413a5cf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40259
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Venkata Krishna Nimmagadda <Venkata.krishna.nimmagadda@intel.com>
|
|
Disable dynamic clock gating for the community cr50's IRQ lives on.
That IRQ is pulsed very quickly, and with clock gating enabled pulses
tend to be missed. This is expecially true on the default 0.0.22
firmware that cr50 comes with out of the factory.
BUG=b:154178408 b:154293730
BRANCH=None
TEST=build waddledoo successful and Linux has no TPM IRQ timeout error.
Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Change-Id: I2b1b3ee59ebf6adce0653e7550b457e02d3c87df
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40480
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Configure DRAM population strap GPIO according to the schematics.
Configure an internal pull-up to support the boards in which the strap
is not populated. Read the strap and pass that information to FSP for
memory initialization.
BUG=b:152275658, b:154301008
TEST=Build and boot the mainboard. Ensure that the strap information is
read as expected and passed to FSP.
Change-Id: I69583f35ffc219bae9ce06bd4ba9898ed0d4d21d
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39812
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Original AMD_PLATFORM_MOBILE is incorrect because this board is a desktop one.
Signed-off-by: Mike Banon <mikebdp2@gmail.com>
Change-Id: I02adedffe8624c38e7b93fadd0449ddf094388fd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33919
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Looks like the guard was dropped by mistake.
Signed-off-by: Mike Banon <mikebdp2@gmail.com>
Change-Id: Ie73c4d6cb557820ae7427fef15ca8110722c5b68
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33916
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
These comments exist in other buildOpts.c files, but not in this one.
Tested with BUILD_TIMELESS=1, hashes do not change.
Signed-off-by: Mike Banon <mikebdp2@gmail.com>
Change-Id: Ic0aab06f1956bc0bf9f96d6176643c113a1e4cc5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33915
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
|
|
This makes it easier to know which files are being included.
Tested with BUILD_TIMELESS=1, hashes do not change.
Signed-off-by: Mike Banon <mikebdp2@gmail.com>
Change-Id: Ic096848f23910e2ad9183e44d882450ab8d4fdf1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33914
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Reorder lines to make it more similar to buildOpts.c of Lenovo G505S.
This improves diff results, which is convenient for debugging.
Tested with BUILD_TIMELESS=1, hashes do not change.
Signed-off-by: Mike Banon <mikebdp2@gmail.com>
Change-Id: I1674252fab2fc6fbf9be2b37e97a6f5ff97a04b3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33913
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Merge the recent change from other platform(ICL/JSL).
- Update SKpMpInit setting
- Update APIs for getting dev info
- Update IGD related setting
- Update debug interface setting
BRANCH=none
TEST=build and boot ripto/volteer
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: Ie4dd4bcef3d8afc71ae4a542dbe8e4ba385593cd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40349
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update device enable/disable based on PCH EDS#576591 vol1 rev1.2
BRANCH=none
BUG=b:154037185
TEST= boot up OS in volteer and check and check lspci
Unsupported IP should be visable from lspci result
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: I61a328da1014ab7584c3ec789971a106c7a0a403
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40394
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For bit fields with 31 bits (e.g: DEFINE_BITFIELD(MYREG, 30, 0) ),
the calculation of mask value will go overflow:
"error: integer overflow in expression '-2147483648 - 1' of
type 'int' results in '2147483647'".
And for bit fields with 32 bits (e.g: DEFINE_BITFIELD(MYREG, 31, 0) ),
the error will be:
"error: left shift count >= width of type [-Werror=shift-count-overflow]"
To fix these issues, the bit field macros should always use unsigned
integers, and use 64bit integer when creating mask value.
Change-Id: Ie3cddf9df60b83de4e21243bfde6b79729fb06ef
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40404
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
The samsung-K4U6E3S4AA-MGCL.spd.hex is not used and planed by anyone
yet. On the other hand, the spd content is not correct based on JSL
spec as well.
BUG=b:153426401
TEST=build waddledoo and waddledee successfully.
Change-Id: If71e3ef2e3385378633549bf8709a1cd6ecc0dd3
Signed-off-by: Marco Chen <marcochen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40433
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Change-Id: Idea18f437c31ebe83dd61a185e614106a1f8f976
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38199
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I8b56df6de7529772b0f1a59002f92c4f31486bf0
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38196
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I379a5664776624600ff1c2919bffa77c877d87ab
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38191
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I605d39d907e083e73af4c72607216384e7ce166a
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38190
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Do this to remove elog header dependency from pc80/ and
remove some preprocessor guards.
Change-Id: I98044a28c29a2b1756fb25fb593f505e914a71c0
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38189
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Configure write protect and card detect SD Card GPIO for JSLRVP
as per schematics.
BUG=None
BRANCH=None
TEST=Build, boot JSLRVP and verified SD Card detection.
Change-Id: I8114d6980a2a542538b05f812ca2cffc15c88c22
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39492
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Depthcharge trusts that our TPM driver is working reliably,
and so should we. Also remove CRC check -- the value returned
by antirollback_read_space_firmware() is dropped in vboot_logic.c
verstage_main(), and vboot handles this check internally.
BUG=b:124141368, chromium:972956
TEST=make clean && make test-abuild
BRANCH=none
Change-Id: I5d3f3823fca8507fd58087bb0f7b78cfa49417ab
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40359
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
These constants were left behind after the code using them
was relocated in CB:34510.
BUG=b:124141368, chromium:972956
TEST=make clean && make test-abuild
BRANCH=none
Change-Id: I6ce7c969a9e9bdf6cdce3343ba666a08b3521f27
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40358
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Configure lockdown and i2c speed setting.
BUG:b:151161585
BRANCH=none
TEST=build and boot tglrvp and check FSP logs to lockdown
parameters
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: Id7a1e9bd94ff86faa390b5de0518e8b3cb668bff
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40116
Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Reference Arcada to add device tree for Cirque touchpad.
BUG=b:152931802
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: Ia354702c8054b5826d45896f7bff268335726028
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40114
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Modify stop_delay as 115ms to waiting for Melfas device I2C interface
ready after touch fw auto update and rebind driver.
BUG=b:153708773
BRANCH=drallion
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Change-Id: Ib392190d2b4188ee228d8ca4873e03176d2f127f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40357
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Mathew King <mathewk@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
It is not necessary to pass its value around various function calls.
Move it closer to where it is actually used, so as to make it static.
Also, use config_of_soc and flip the branches of the first conditional.
Tested on Asus P8Z77-V LX2, still boots.
Change-Id: I5c49c943c87218d4d40d3168bd8b7b900b0ec2e9
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39851
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I80786042b1c464268cae8093bd5d3e8d73be5aee
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40320
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Reserve bytes 50 and 55 as they are handled as century bytes by QEMU.
Change-Id: I9271253bce560d4ec8a51a24c45473acec469187
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40319
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: If4c4dc9467154a18168550538fc8e655636e87a0
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40318
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The weak definition of board_id() in coreboot_table.c returns a
uint32_t, so update this function to match. This fixes a compiler error
when using LTO.
Change-Id: I6ad03ecedcf4a4d9f0c917cdc760f81ddde06d11
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39015
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Guckian
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
These variables are declared to be arrays of MICROCODE_PATCHES_4K (which
is a struct containing a UINT8 array). However, the actual definitions
of these arrays ignore the wrapping struct and just use the underlying
UINT8 arrays directly, which causes a compiler error when using LTO
because of the type mismatch. Fix the type declaration so that it
matches.
Change-Id: I6bef27507092fe72fe2f836c427ebb2c19009e78
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40436
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This array is declared to have length MAX_FF_TYPES (aka 6) in several
other places, so update it here so the length matches. This fixes a
-Wlto-type-mismatch compiler error when using LTO. Extending the length
is harmless, since the only code that uses this array will stop once it
reaches the NULL pointer.
Change-Id: Ie00e969fa8cda88a934bf416c8775f7ae0b2747e
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39014
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Align the whitespace and do some cosmetic changes. This makes it easier
to fold these two boards into a variant setup.
Change-Id: I53bdd90ae47b52dfdfec27229c6b904487fa2081
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40380
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
sb/intel/i82371eb/isa.c has code that fills this path with CPU info.
Because it was not declared in the DSDT, Linux kernel 4.4.18 as used in
Slackware 14.2 complains.
Change-Id: Ib85dd02504b068bb7ea71be2f22e425f3831595a
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38601
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
These are declared by superio.
Change-Id: I1db4aca7d682ec298b8f53cfab6ffe661e8ff6e0
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38600
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
With this bootblock messages are transmitted over serial too.
TEST=Serial messages transmitted normally on asus/p2b-ls.
Change-Id: I6f3ee68e7c76a8c6db6d75956e6a7fb75ef83850
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38670
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
TEST=build with BUILD_TIMELESS=1, binary does not change
Change-Id: I864f939a84ee9e90013ba9d3fcc8a7e4bf03e4ee
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39904
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
TEST=build with BUILD_TIMELESS=1, binary does not change
Change-Id: I1161c726c8c752b5b1e152e1617811989631096e
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39903
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Boot tested on hardware.
Change-Id: I24afd67dada135a8c2597f5ac1c7e91ce43897c9
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39901
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The error message has been copy-pasted across various functions, so it
is nearly impossible to know which function printed it. So, use __func__
to print that information.
Change-Id: I55438c2b36cc3b21f3f168bf98b0aca5fd50bbbc
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40446
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
F14GetNbCofVidUpdate() is declared elsewhere to be of type
F_CPU_IS_NBCOF_INIT_NEEDED, which is supposed to return a boolean value
(not an AGESA status). This is fixed in the corresponding f15tn and
f16kb code, so apply the same change here. This fixes a compiler error
when using LTO.
Change-Id: Ifc44e2c0467f8bd1f537b5a69c501ba51053d3d9
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39013
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Allocate storage for the BERT reserved memory in cbmem, and add it in
response to a romstage hook. Add a Kconfig option for adjusting the
size reserved. This is different from the Stoney Ridge implementation
where it was intentionally oversized to ease MTRR use and to keep TSEG
aligned.
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I4759154d394a8f5b35c0ef0a15994bbef25492e5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38694
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Tioga Pass platform use GPIO pin of GPP_B20 for POST complete,
BIOS needs to configure this pin for BMC to poll,
so it knows when to start to access other components.
Tested=Read GPIO status (GPIOAA7) in OpenBMC, the value is 0,
the command and result are shown as below,
root@bmc-oob:~# cat /tmp/gpionames/FM_BIOS_POST_CMPLT_N/value
0
root@bmc-oob:~#
Change-Id: I134f80153461c5acd872587038a2207586b658dd
Signed-off-by: BryantOu <Bryant.Ou.Q@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40426
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
EFS2 allows EC RO to enable PD for special cases. When doing so, it sets
NO_BOOT flag to avoid booting the OS. AP needs to get NO_BOOT flag from
Cr50 and enforce that.
This patch makes verstage get a boot mode and a mirrored hash stored
in kernel secdata from Cr50.
This patch also makes romstage write an expected EC hash (a.k.a. Hexp) to
Cr50 (if there is an update).
BUG=b:147298634, chromium:1045217, b:148259137
BRANCH=none
TEST=Verify software sync succeeds on Puff.
Signed-off-by: dnojiri <dnojiri@chromium.org>
Change-Id: I1f387b6e920205b9cc4c8536561f2a279c36413d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40389
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
tlcl_cr50_get_boot_mode gets the boot mode from Cr50. The boot mode
tells coreboot/depthcharge whether booting the kernel is allowed or
not.
BUG=b:147298634, chromium:1045217, b:148259137
BRANCH=none
TEST=Verify software sync succeeds on Puff.
Signed-off-by: dnojiri <dnojiri@chromium.org>
Change-Id: Iadae848c4bf315f2131ff6aebcb35938307b5db4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40388
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Tigerlake platform does not have built in eMMC/SD support so all
this code is unused and can be removed.
Change-Id: I70ff983d175375171d5a649378f32f1062c0876d
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40372
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
