| Age | Commit message (Collapse) | Author |
|---|
|
Add Raptor Lake (RPL) 28W dptf settings for Brya0
BUG=b:235311241
BRANCH=firmware-brya-14505.B
TEST=Built and tested on brya
Change-Id: I5d06c1ace5b481012ea39f2a57570eb6330479cb
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72887
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
|
|
Add Raptor Lake (RPL) 28W dptf settings for Skolas
BUG=b:235311241
BRANCH=firmware-brya-14505.B
TEST=Built and tested on skolas
Change-Id: I4364ca6a50906c2a6dd0e754238264c680e7ebd0
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72728
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Update Power Limit1 (PL1) minimum value to 15W based on the Brya
design.
BRANCH=firmware-brya-14505.B
BUG=b:235311241
TEST=Built and tested on Brya system
Change-Id: Ifd5256221b82eae2cfe8009918f8ff4791751b4d
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72868
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
|
|
Update Power Limit1 (PL1) minimum value to 15W based on the skolas
design.
BRANCH=firmware-brya-14505.B
BUG=b:235311241
TEST=Built and tested on Skolas system
Change-Id: I1027ca2bf2323ac959474ee6c38e47fa530113da
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72727
Reviewed-by: AlanKY Lee <alanky_lee@compal.corp-partner.google.com>
Reviewed-by: Vidya Gopalakrishnan <vidya.gopalakrishnan@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
|
|
Update dptf thermal settings as per suggested by thermal team.
Control fan based on TSR sensors, not based on CPU sensor temperature
which changes too fast.
BRANCH=firmware-brya-14505.B
BUG=b:235311241, b:261749371
TEST=Built and tested on Brya system
Change-Id: I58bc7132086b0776ee191a242bd1302554f3854f
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72867
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
|
|
Update dptf thermal settings as per suggested by thermal team.
Control fan based on TSR sensors, not based on CPU sensor temperature
which changes too fast. This change is based on the discussion on
bug:235311241 comment#7.
BRANCH=firmware-brya-14505.B
BUG=b:235311241, b:261749371
TEST=Built and tested on Skolas system
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Change-Id: Ibeddce61b0d73d82a85f486e7cb5cbfa9568953c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71692
Reviewed-by: AlanKY Lee <alanky_lee@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Vidya Gopalakrishnan <vidya.gopalakrishnan@intel.com>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
|
|
The keyboard reset is not being used on this board, so disable the
functionality.
BUG=None
TEST=Check register values
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I4a9f8f254dfefcb32a77f558f984bcdd6004d34b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72913
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
For MDN, PHX, & Glinda platforms, the Keyboard Reset functionality has
been moved from GPIO 129 to GPIO 21.
Additionally, the issue where the system would reset when the KBDRST_L
pin went low even when not configured for Keyboard reset seems to have
been fixed, so remove that text.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Iefe7e00d63777577b59ee98cb974b07afea1fd12
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72912
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
One of the main functions performed by the FSP GOP driver is to modify
the ATOMBIOS tables (part of the VBIOS) in memory based on the display
output configuration. This device-specific modified VBIOS can be cached
in a FMAP region specific for that purpose, then loaded into memory
instead of the "generic" VBIOS, saving the ~130ms execution time of the
GOP driver.
As this approach only works when no pre-OS display output is needed,
limit its use to ChromeOS builds, with the GOP driver enabled, and
not booting in either recovery or developer modes.
SoCs supporting this feature will need to selectively run the FSP GOP
driver as needed, using the same criteria used here to determine
whether to load the VBIOS from CBFS or from the FMAP cache.
Boards utilizing this feature will need to add a dedicated FMAP region
with the appropriate name/size, and select the required Kconfig options.
BUG=b:255812886
TEST=tested with rest of patch train
Change-Id: Ib9cfd192500d411655a3c8fa436098897428109e
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70858
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
|
|
The SPI BIOS decode lock bit needs to be set, according to
Intel EBG EDS dodcumentation.
Signed-off-by: Tim Chu <Tim.Chu@quantatw.com>
Change-Id: I3366817b42a5878f16575698ebc546fa7852e285
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71953
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
|
|
The patch adds support for new Meteor Lake MCH (ID:0x7d16).
TEST=Build and boot the system having MCH ID:0x7d16.
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: Ib0c9ce5c58e4bdec5e7245840f0892d651922cd9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72835
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Usha P <usha.p@intel.com>
|
|
Enable DPTF functionality for Meteor Lake based mtlrvp board
BRANCH=None
BUG=None
TEST=Built and booted on mtlrvp board
Change-Id: I8d3e1cd43cf67c3f2081be339589a6da358b668c
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71098
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Using a &uint64_t as a string argument does not include the required
NULL character termination. Update the format string to only print the 8
desired characters and not continue printing stack memory until a NULL
is found.
Before:
[EMERG] Invalid UPD signature! FSP provided "AMD_01_M;....`", expected was "CEZANE_MAMD_01_M;....`".
After:
[EMERG] Invalid UPD signature! FSP provided "AMD_01_M", expected was "CEZANE_M".
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: Ib334daa8518a92e0cf3d22c4d95908f4c84afe04
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72911
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Commit bf3c648fa7f6 ("soc/intel/skl; mb/google/eve,poppy: Update NHLT
methods") contained a copy/paste error for rammus, swapping the max98373
entry for the correct max98927 one. Change it back.
TEST=build/boot Windows on rammus, verify audio functional with
coolstar's AVS audio drivers.
Change-Id: Ibcd4b752e01866a3dd54997f1d2a6c079b07b7a3
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72473
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: CoolStar <coolstarorganization@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Commit ae20d4c78f9f ("mb/google/volteer: Fix USB4 enabling for volteer
family") reworked the USB4/TBT config for volteer, but drobit variant
was missed for some reason. Add the missing USB4/TBT entries.
TEST=build/boot Windows on drobit, verify USB4/TBT functional.
Change-Id: I43d771eeaf29b4e141b222ccb05af5cb7ceedc6f
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72141
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Commit 525c61f74e94 ("mb/google/hatch: Implement touchscreen power
sequencing") contained a copy/paste error; KOHAKU's enable GPIO is set
twice in ramstage, and the reset GPIO not at all, leading the
touchscreen to not be detected.
Correct the copy/paste error by replacing the 2nd instance of GPP_C12
with GPP_D15.
TEST=build/boot Windows/Linux on KOHAKU, verify touchscreen works.
Change-Id: I08d35f1e2a951cdaa463daa34df2134fdc8c65c8
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72119
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Enables display backlight control under Windows.
VBT extracted from stock ChromeOS firmware Google_Drallion.12930.543.0.
TEST=build/boot Win11 on drallion, verify OS backlight control
available and functional.
Change-Id: I85065f22b825a7616fa4ac632c42ae7972091e24
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72579
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Under Win11, a longer delay after asserting reset is needed for the
Goodix touchscreen to init properly. Increase the reset delay to match
that used for the Goodix touchscreen by other volteer variants (120ms).
TEST=build/boot Win11, Linux on eldrid variant with Goodix touchscreen,
verify functional.
Change-Id: I489f037f0bbade9567aad2ad64404a5ac66965d9
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72580
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Not all firmware which uses VPD uses both RO and RW regions, so either
one not existing is not necessarily an error.
Change-Id: I50f43a25ee24a642c39e2f0b52de2d4fef023f3b
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72476
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Some older devices use the vpd key 'ethernet_mac' vs 'ethernet_mac0'
for the first/only LAN NIC, so don't treat the key lookup as an error.
If no MAC is able to be found, another error will be printed later
in the driver init.
TEST=build/boot google/fizz, dump cbmem log, verify 'ethernet_mac0'
lookup failure printk output at warning level.
Change-Id: If5226f4686a819a7020fd14f130181420ee1462b
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72475
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Constitution will use SOLDERDOWN. Add memory.c to override baseboard.
Add mem_parts_used.txt and generate dram_id.generated.txt and
Makefile.inc
Memory:
SAMSUNG K4U6E3S4AB-MGCL
MICRON MT53E1G32D2NP-046 WT:B
BUG=b:267539938
BRANCH=None
TEST=util/abuild/abuild -p none -t google/brya -x -a
Change-Id: Id879b2a7491f29e9fca903dcf3c022ec8ffffab4
Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72775
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Add EC_HOST_EVENT_USB_MUX to MAINBOARD_EC_S0IX_WAKE_EVENTS for
brask. Without it EC won't send host event to wake AP when USB
MUX is changed during S0ix. It's there for brya but missing
for brask.
BUG=b:267573651
TEST=emerge-brask coreboot
Signed-off-by: Derek Huang <derekhuang@google.com>
Change-Id: Id08d9aec9ab3566176369f2ca25cd00b9f0a0ca5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72899
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
|
|
This reverts commit 8e1bb93fb88bc9cc20aab33a1fe09fb4c0c652a0.
Reason: Enabling L.2 breaks some devices on this bridge. Reverting
until a workaround is found and additional testing is done.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I9f721178244e7764e9b08e419db8a8c05ecc29a7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72916
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
|
|
Change-Id: I5b7b1c218a0e8c8ba713b370622fbc37a1e57097
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69259
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
The desktop 9 series PCHs should be the same as the 8 series PCHs.
Change-Id: Iee93fee4f28b88a72c537944159fb7cbb2796235
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68187
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Hook up the `wake_on_usb` EEPROM setting so that it works as intended.
TEST=Keysmash on a USB keyboard, verify Hermes does not wake from S3.
Change-Id: I81531b90abae6a62754ea66c47e934e1f440bda2
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72906
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
GPIO 67 is not currently used on skyrim, so set it as no-connect.
Since it's now free for other purposes, make sure that the
SPI-ROM-SHARING functionality is disabled.
BUG=b:268330591
TEST=Examine registers after change
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Id083baf41d25920eca09795453a01aac1d00d0f5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72908
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
BUG=None
TEST=Verify that DMI type 3 - Chassis Information Type field has changed
from Desktop to Laptop
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I76c8970fe3fdc2ea322a07f114ad03a0373e152c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72907
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Move the missing APCB warning to the end of the build and make it stand
out better. Prior to this patch, the warning would appear as one of the
first build messages and easily be missed due to the rest of the build
messages.
TEST=build with and without proper APCBs being found, warning message
appears only when APCB is not found and stands out more
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: Iabe32636b8e31fe781519533a329a08535bd661a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72901
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Instead of having a magic entry in the CPU device ID table list to tell
find_cpu_driver that it has reached the end of the list, introduce and
use CPU_TABLE_END. Since the vendor entry in the CPU device ID struct is
compared against X86_VENDOR_INVALID which is 0, use X86_VENDOR_INVALID
instead of the 0 in the CPU_TABLE_END definition.
TEST=Timeless build for Mandolin results in identical image.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Suggested-by: Angel Pons <th3fanbus@gmail.com>
Change-Id: I0cae6d65b2265cf5ebf90fe1a9d885d0c489eb92
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72888
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
1. add functions to generate if greater than conditions:
acpigen_write_if_lgreater_op_op:
if (op1 > op2)
acpigen_write_if_lgreater_op_int:
if (op > val)
acpigen_write_if_lgreater_namestr_int:
if (namestr > val)
2. add function to assignal value to a namestr
acpigen_write_store_namestr_to_op:
namestr = val
TEST=Use above functions and check the generated SSDT table after OS
boot.
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Change-Id: Iffe1b23362a7ab58bdc2aa8daf45cd6f086ee818
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72825
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Reviewed-by: Anil Kumar K <anil.kumar.k@intel.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When enable_gpio is used as active low output, the _STA returns
incorrect value.
Also, simply the logic for _STA method.
When enable pin is used for _STA:
| polarity | tx value| get_tx_gpio() | State |
| active high | 0 | 0 | 0 |
| active high | 1 | 1(active) | 1 |
| active low | 0 | 1(active) | 1 |
| active low | 1 | 0 | 0 |
When reset pin is used for _STA:
| polarity | tx value| get_tx_gpio() | State |
| active high | 0 | 0 | 1 |
| active high | 1 | 1(active) | 0 |
| active low | 0 | 1(active) | 0 |
| active low | 1 | 0 | 1 |
Generated _STA method:
Ex: for using active low power enable GPIO pin GPPC_H17:
Method (_STA, 0, NotSerialized) // _STA: Status
{
Local0 = \_SB.PCI0.GTXS (0x5C)
Local0 ^= One
Return (Local0)
}
TEST=Check the SSDT when booted to OS.
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Change-Id: Ie6f1e7a5b3e9fd0ea00e1e5b54058a14c6e9e09e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72421
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Mainboard name is Compal JBL00. This is based on the GM45/ICH9M chipset
and uses DDR2 RAM. The EC is a SMSC MEC5035 which has internal flash, so
there's no issue about making sure to include the EC firmware in the
BIOS region. This only supports the variant with integrated graphics
only, the version with a discrete Nvidia Quadro NVS 160M is not
supported.
This port was based on the Lenovo T400 port.
Working:
- USB EHCI debug (lower USB port on right side)
- Keyboard
- Touchpad/trackpoint
- VGA
- Displayport
- ExpressCard
- Audio
- Ethernet
- mPCIe WiFi
- mPCIe Bluetooth (uses USB)
Not working:
- Brightness hotkeys
- Physical Wireless switch
- SD card slot: Linux outputs an "irq 18: nobody cared" message when
inserting a card, after which it disables the IRQ
Unknown/untested:
- Dock
- Smartcard (slot and contactless)
- Firewire
- eSATA
- TPM
- Battery (my battery is at the end of its lifespan)
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Change-Id: I516ebbf4390a3f6d242050da8d35dc267b8b3a28
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59704
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
For Carrizo, the soc name was set as UNKNOWN.
The change is supposed to be binary unmodified, except the SPI
settings. According to the spec, the Stoneyridge and Carrizo have the
same definition of SPI setting in EFS.
Change-Id: I9704a44773b2f541f650451ed883a51e2939e12a
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66823
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Found by linter
Change-Id: I7a49cce0b56cf83d0e4490733f9190284a314c4a
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72896
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
"break" is useless after "return".
Change-Id: I84bc506a3d50e937797f42659299bf90ce392e09
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72895
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Also remove unnecessary whitespace before "\n"
Change-Id: Ia2c8fcb82658ed3e247759535d3112270d46e65d
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72893
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
The AMD SimNow tool supports fast logging through an IO port. Add a new
console to support SimNow logging through port 80.
TEST=observe significant speed improvements on SimNow console log
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I42a431f48ea14ba4adacbd4a32e15abe7c5e4951
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72751
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
For Geralt, we use BOE_TV110C9M_LL0 as MIPI firmware display, so add the
power-on sequence for BOE_TV110C9M_LL0.
BUG=b:244208960
TEST=test firmware display pass for BOE_TV110C9M_LL0 on Geralt.
Change-Id: I3ef0b2e26d8cc0dc35c2985363ee4c3557dac8a9
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Signed-off-by: Liju-Clr Chen <liju-clr.chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72749
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
The regulator MT6359P is needed by both firmware display and SD card.
To avoid duplicate initialization in ramstage, publicize init_pmif_arb()
as mt6359p_init_pmif_arb() and call it from mainboard_init(). This would
save 13 ms for boot time on Geralt.
BUG=b:244208960
TEST=test firmware display pass for BOE_TV110C9M_LL0 on Geralt.
Change-Id: I29498d186ba5665ae20e84985174fc10f8d4accd
Signed-off-by: Liju-Clr Chen <liju-clr.chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72839
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
The patch removes hybrid_storage_mode variable from
soc_intel_meteorlake_config struct since hybrid storage is no longer
supported on Meteor Lake platform.
TEST=Verify the build for Rex board
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I40ec3775b827ab6e1ebd4778c6c8e13eac1944e5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72871
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Move eMMC init from depthcharge into coreboot to remove it from the
critical boot path. Doing so saves us almost 35ms on villager:
before change:
finished storage device initialization 50,783
after change:
finished storage device initialization 16,255
BUG=b:254092907,b:218406702
BRANCH=None
TEST=flash new FW onto villager and make sure can boot from eMMC
Change-Id: I1af1ec162029120332e7f531f75c3780266d322b
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71830
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Remove the commented VBOOT_VBNV_CMOS Kconfig option as well as VBOOT for
emeraldlake2.
BUG=b:235293589
TEST=none
Change-Id: Ie583dcf615573784c657b9d220ad417b05704150
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72890
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
To deprecate VBOOT_VBNV_CMOS [1], replace VBOOT_VBNV_CMOS with
VBOOT_VBNV_FLASH for z220_series.
[1] https://web.archive.org/web/20230115020833/https://issuetracker.google.com/issues/235293589?pli=1
BUG=b:235293589
TEST=./util/abuild/abuild -t HP_Z220_CMT_WORKSTATION -a \
# with VBOOT enabled and a custom FMDFILE with RW_NVRAM region
Change-Id: I1c60a44fb12fd093f45cf54ef2f9e0e02afc80bd
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72891
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This reverts commit d6e04aa00bc5a8912a041a569eb57f6962d1119a.
Reason for revert: Breaks master.
Change-Id: If7daeaaffe3f9ae9f5e2fbecef5817b9b62827d3
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72917
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
|
|
Config GPP_B9 as LAN_CLKREQ_ODL based on latest schematic
BUG=265021899
BRANCH=dedede
TEST=emerge-dedede coreboot
Change-Id: Ia099bd64364b46240e0426aa57dfe8d230e7494d
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72865
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sam McNally <sammc@google.com>
Reviewed-by: Liam Flaherty <liamflaherty@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Add SoC config and .early_init = 1 in I2C1
BUG=b:263060849
TEST=FW_NAME=omnigul emerge-brya coreboot
Change-Id: I661bdee6c7b9e6ea4cd0ab2006967d7c7ddd0f67
Signed-off-by: Jamie Chen <jamie_chen@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72872
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
|
|
1. Add fw_config:STORAGE_UFS & STORAGE_NVME to switch storage.
2. rp11 off change to on.
BUG:b:263846075
TEST=FW_NAME=omnigul emerge-brya coreboot
Change-Id: I35c02ac9cbb8442d7b4aae57f6c7b576b2b5f77b
Signed-off-by: Jamie Chen <jamie_chen@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72090
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Add configuration to bump up the SPI flash bus speed from 66 MHz to 100
MHz for starting next phase.
BUG=b:267539952
TEST=None
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Change-Id: Id46201351780bb5bc05422ff36dad6972285690e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72870
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Chao Gui <chaogui@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
|
|
Create the aurash variant of the brask reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0).
BUG=b:263691099
BRANCH=None
TEST=util/abuild/abuild -p none -t google/brya -x -a
make sure the build includes GOOGLE_AURASH
Change-Id: I595102778071f822c5cf69ceadeed174e5ea4836
Signed-off-by: Zoey Wu <zoey_wu@wistron.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72837
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Scott Chao <scott_chao@wistron.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add NO_S0IX_SUPPORT for boards that do not support, or do not want
to support S0IX.
As all the boards in the tree that do this, don't support D3Cold,
add D3COLD_SUPPORT that defaults to `n` when NO_S0IX_SUPPORT is
selected to disable D3Cold support.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I04abc7efe2db06ae6daba9e09835441b62ee44f4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72799
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
This is required to prevent the EC from shutting down the system after
about 15 seconds after being turned on. If the EC doesn't receive a
command meaning "CPU OK" it assumes that the processor has failed and
flashes a diagnostic code on the keyboard LEDs to indicate this.
This also enables the keyboard and trackpad/trackpoint interfaces.
Parts of this code were derived from yet-to-be merged code in CB:44975
(ec: Add support for MEC5055 for Dell laptops) written by Iru Cai.
Tested on a Dell Latitude E6400
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Change-Id: Ia420cd51e9a64be5eee4af2c0d113618575522b0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59703
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update ec_commands.h from the EC repo at:
"8b6f7de2a7 fan: update fan stalled value reporting"
This is an exact copy of the EC repo's ec_commands.h with the
exception of updating the copyright message.
BUG=b:258110734
BRANCH=none
TEST=built coreboot for brya
Change-Id: I4ce15e1af40cc54a6cf2ebd6f5d5adf8953dee60
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72640
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
This is a format-only change: Reformat ec_commands.h using clang-format
according to the EC repo's current formatting style.
The command is:
clang-format --style=file:$EC/.clang-format -i ec_commands.h
where $EC points to the chromeos EC repo.
The EC repo has recently adpoted the practice of formatting all files
through clang-format using its own style. So, run ec_commands.h through
the EC's clang-format so future updates don't get overwhelmed by
inconsequential style changes.
BUG=b:258110734
BRANCH=none
TEST=built coreboot for brya
Change-Id: Icbd6d00922dc5fd4c44ee109d54cea612e15db06
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72639
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Move get_loglevel_from_vpd from mb/ocp/deltalake to driver
drivers/ocp/vpd/loglevel_vpd.c.
Change-Id: I70af1051f63c527fd8150f5ecbe4765b4aaacd20
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71936
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This patch enables PCI Express Advanced Error Reporting Capability for
WWAN, WLAN, and SSD root ports. On enabling PCIE_RP_AER, PCIE device
will automatically report (if any error) about the error nature to the
corresponding PCIe root port.
BUG=b:224325352
BRANCH=None
TEST=Build and boot mtlrvp to ChromeOS.
Signed-off-by: Harsha B R <harsha.b.r@intel.com>
Change-Id: Iab8619818e2219b41287b895513eb04b0464401e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72874
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
Use common sdhci driver in coreboot to initialize eMMC for sc7280.
This should allow us to initialize eMMC earlier in the boot process,
taking it out of the critical path.
BUG=b:254092907
BRANCH=None
TEST=emerge-herobrine coreboot chromeos-bootimage
Change-Id: Ifa88da500e82b44d7523f2e68763e01399c89f4d
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71829
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Porting from depthcharge changes for supporting eMMC driver
functionality with standard SDHC controller on Qualcomm chipsets.
sdhci_msm_init() needs to be run before the standard
sdhci_mem_controller initiailzation.
BUG=b:254092907
BRANCH=None
TEST=emerge-herobrine coreboot
Change-Id: I6f4fd1360af1082b335f9cc3046871ce9963b5d0
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72634
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Adding a attach callback function pointer in case a platform needs
to execute anything before the standard initialization of the sdhci
mem controller.
BUG=b:254092907
BRANCH=None
TEST=emerge-herobrine coreboot
Change-Id: I0f37ec09d083922cad5ecd3c47b184cf3311fe2d
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72633
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
|
|
Port over the remaining AMD SoCs to use CPUID_FROM_FMS. The Glinda CPUID
still needs to be updated to the actual CPUID, but for now just change
it to use CPUID_FROM_FMS.
TEST=Resulting image of timeless build for Gardenia (Stoneyridge),
Majolica (Cezanne), Chausie (Mendocino), Mayan (Phoenix) and Birman
(Glinda) don't change.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia508f857d06f3c15e3ac9f813302471348ce3d89
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72862
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Implement a get_soc_type function to determine if the silicon the code
is running on is Phoenix or Phoenix 2. This will for example be needed
to provide the correct DXIO descriptor table for the SoC.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I5f2b668b83432426b04e7f1354b694ddd6c300d6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72861
Reviewed-by: ritul guru <ritul.bits@gmail.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Now that there is a cpuid_match function, we can use it instead of doing
basically the same thing manually. In the functions is_fam17_1x and
is_fam17_2x both the stepping number and the lower nibble of the model
number are masked out. To avoid having magic constants in the code,
introduce the CPUID_ALL_STEPPINGS_AND_BASE_MODELS_MASK definition.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I758f9564c08c62c747cc4f93a8d6b540a1834a62
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72860
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since the functionality of cpuid_match is also useful outside of
arch/x86/cpu.c and it's a relatively simple function, move its
definition as inline function to the header file.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ic96746b33b01781543f60cf91904af35418e572d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72859
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Intel ADL-P USB Type-C ports are not compatible with Parade PS8815
retimer on USB U1/U2 transition. The usb_lpm_incapable config is
used to disable USB U1/U2 transition for these Type-C ports.
This patch add usb_lpm_incapable config for the following variants
with PS8815 retimer:
- kinox MLB: C0
- volmar DB: C1
- osiris MLB: C0/C1
- mithrax DB: C1
- felwinter DB: C1
- taeko DB: C1
- gimble DB: C1
- gimble4es DB: C1
- taniks DB: C1
- marasov DB: C2
- gaelin MLB: C0/C1
- skolas DB: C1
- skolas4es DB: C1
- brya0 DB: C1
BUG=b:253402457
TEST=Plug in device and check LPM sysfs nodes are disabled
localhost ~ # cat /sys/bus/usb/devices/2-X/power/usb3_hardware_lpm_u1
disabled
localhost ~ # cat /sys/bus/usb/devices/2-X/power/usb3_hardware_lpm_u2
disabled
Change-Id: Ie9246ff7908887404f49ec10ee781c8cba410557
Signed-off-by: Ron Lee <ron.lee@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71925
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Add regulator VM18 support to supply power for BOE_TV110C9M_LL0.
BUG=b:244208960
TEST=test firmware display pass for BOE_TV110C9M_LL0 on Geralt.
Change-Id: I13bafbe10a18a18e253575fd107c9b415f28ef01
Signed-off-by: Sen Chu <sen.chu@mediatek.corp-partner.google.com>
Signed-off-by: Liju-Clr Chen <liju-clr.chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72748
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
To provide power to MIPI panel BOE_TV110C9M_LL0, add support for
regulator VM18.
BUG=b:244208960
TEST=test firmware display pass for BOE_TV110C9M_LL0 on Geralt.
Change-Id: Ib8c3b2df1157b23b37492b1e9b1716903ea67799
Signed-off-by: Sen Chu <sen.chu@mediatek.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72747
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Enable is already a boolean, so the !! is not needed.
BUG=None
TEST=build pass.
Change-Id: I25a7cec632f21a258b8364c82e25b59e55ab7453
Signed-off-by: Liju-Clr Chen <liju-clr.chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72869
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
There might be inconsistence between regulator_id[] and
`enum mtk_regulator` when we need to add new regulator IDs for Geralt.
Therefore, we implement get_mt6366_regulator_id() to get regulator IDs.
BUG=None
TEST=build pass.
Change-Id: I3d28ebf2affe4e9464b1a7c1fb2bbb9e31d64a5e
Signed-off-by: Liju-Clr Chen <liju-clr.chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72838
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
TEST=Resulting image of timeless build for Mandolin doesn't change.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I44cb7759206e9e1ce79fd57f62b9a844e52f7394
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72857
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Introduce a macro to get the raw CPUID leaf 1 EAX value from a given set
of CPU family, model and stepping. The processor type in bits 12 and 13
is assumed to be always be zero; at least this is the case for all
CPUIDs that are currently in the coreboot tree. This can be used to
make the device values in the CPU device ID tables easier to read.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Idab77453712b14983b1d02ca365f7924239fc2bf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72856
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use CPUID_ALL_STEPPINGS_MASK as CPUID match mask to support all family
15h model 60h and 70h steppings.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id05f849d59c04efa9f38dd66892f3cb99d94e3ff
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72855
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use CPUID_ALL_STEPPINGS_MASK to only need one CPU device ID table entry
per family & model combination and not one per stepping.
TEST=Thinkpad x230 with Ivy Bridge stepping 9 CPU still boots with this
patch applied.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I46020d5b1b1fba8449c3823fac1369e5670d91c0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72854
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
There are multiple Phoenix steppings, but that is now covered by using
CPUID_ALL_STEPPINGS_MASK.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id4eb3502dec5ebdfdbba263b15b34621952d0554
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72853
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use CPUID_ALL_STEPPINGS_MASK as CPUID match mask to support all Glinda
steppings once GLINDA_A0_CPUID is updated.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ic9b8cbb2dc925a8258db6a4eb0d1b00b2745637f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72852
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use CPUID_ALL_STEPPINGS_MASK as CPUID match mask to support all
Phoenix 2 steppings that might be available in the future. Right now it
shouldn't change any behavior.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If9878b4687360250cac4cfe1409d5dbad7147cf3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72851
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use CPUID_ALL_STEPPINGS_MASK as CPUID match mask to support all
Mendocino steppings that might be available in the future. Right now it
shouldn't change any behavior.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I77ea8c6162667e0a318176e62078b1f57726c10c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72850
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use CPUID_ALL_STEPPINGS_MASK as CPUID match mask to support all Cezanne
steppings. This adds support for Cezanne stepping A1 and possible future
steppings.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Idb020052685d9369109f391797fdd8f8790a91d1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72849
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use CPUID_ALL_STEPPINGS_MASK to only need one CPU device ID table entry
per family & model combination and not one per stepping.
TEST=Mandolin with a Picasso APU with PICASSO_B1_CPUID (0x00810f81)
still finished mpinit and boots successfully even though now only
PICASSO_B0_CPUID (0x00810f80) with CPUID_ALL_STEPPINGS_MASK specified as
device match mask. When commenting out the line with PICASSO_B0_CPUID
as a negative test, mpinit fails as expected.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I00ba43834ad86ecffa09d60599b17d122acd0b99
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72848
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Instead of always doing exact matches between the CPUID read in
identify_cpu and the device entries of the CPU device ID table,
offer the possibility to use a bit mask in the CPUID matching. This
allows covering all steppings of a CPU family/model with one entry and
avoids that case of a missing new stepping causing the CPUs not being
properly initialized.
Some of the CPU device ID tables can now be deduplicated using the
CPUID_ALL_STEPPINGS_MASK define, but that's outside of the scope of this
patch.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I0540b514ca42591c0d3468307a82b5612585f614
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72847
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Use a more specific type in preparation for using bit masks on this
field in the next patch. Since uint32_t is a typedef of unsigned int,
this won't change behavior.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ic54f73dcd3496a5ad85291b9b9586bc740b734d5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72846
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Both Alder Lake and Tiger Lake have Kconfig options for S3, which
disables support for D3Cold. Unify these so that they are easier
to compare.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I6eaba99e5483053a91ca20df2b7788edac5d65b2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72798
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
update EC FW offset location in spirom to 0x81000
For mayan board EC FW is located at offset 0x81000 location,
0th location contains pointer to this EC FW location.
Change-Id: I63c797e12ed131e8411c11379f4db9bcc29b49a2
Signed-off-by: Ritul Guru <ritul.bits@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70540
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Since all SoCs define the df_mmio_control union for the bits used in the
code, data_fabric_print_mmio_conf can take advantage of that and also
print a decoded version of those bits.
Output on Mandolin before the patch:
=== Data Fabric MMIO configuration registers ===
idx control base limit
0 93 fc000000 febfffff
1 93 10000000000 ffffffffffff
2 93 d0000000 f7ffffff
3 1093 fed00000 fedfffff
4 90 0 ffff
5 90 0 ffff
6 90 0 ffff
7 90 0 ffff
Output on Mandolin with the patch:
=== Data Fabric MMIO configuration registers ===
idx base limit control R W NP F-ID
0 fc000000 febfffff 93 x x 9
1 10000000000 ffffffffffff 93 x x 9
2 d0000000 f7ffffff 93 x x 9
3 fed00000 fedfffff 1093 x x x 9
4 0 ffff 90 9
5 0 ffff 90 9
6 0 ffff 90 9
7 0 ffff 90 9
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I06e1d3a3e9abd664f59f2bb852394e7f723f2b30
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72880
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
In contrast to Mendocino and all other AMD SoCs in the coreboot tree,
Rembrandt, on which Mendocino is based on, has a DF_MMIO_REG_SET_SIZE of
3 instead of 4, so the next data fabric MMIO register is 3 DWORDs after
the last one instead of the 4 DWORDs on the other SoCs. This was checked
against PPR #56558 Rev 3.04.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I454ad5d182f0040db93c9b3a83941333392c6061
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72879
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
To be able to handle a special case, add a per-SoC define for
DF_MMIO_REG_SET_SIZE instead of having this hard-coded as 4 in the
DF_MMIO_* macros. To avoid some duplication, also introduce the
DF_MMIO_REG_OFFSET macro.
TEST=Output from data_fabric_print_mmio_conf doesn't change on Mandolin.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I67420a2973c8ef9a7f0ce19ddc0013de69731689
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72878
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Since the MMIO decode range registers in the data fabric are part of the
data fabric and not of the northbridge, replace the NB prefix with a DF
prefix to make this a bit clearer.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ife5e4581752825e9224b50252955d485a067af74
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72877
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
This should make it a bit clearer that those registers are in the data
fabric configuration registers. Also move those defines right after the
register definition those are related to.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ic107bd217f4af0a9ddfbe41aafd3c882aa968e22
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72876
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
CPUID 0x00a70f80 is Phoenix 2 and not Phoenix, so update the define name
to match.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie7500130d5470fdd824980b81746f3a0f6d277d4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72843
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: ritul guru <ritul.bits@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
This patch adds ACPI configuration for USB2/3 ports for mtlrvp as per
schematics. This helps in generating corresponding ACPI code at runtime
that includes port information.
BUG=b:224325352
BRANCH=None
TEST=Able to build and boot MTLRVP. Connect USB device and check if
corresponding enumeration of USB device (14.0) is observed on executing
lspci.
00:14.0 USB controller: Intel Corporation Device 7e7d (rev 01)
00:14.1 USB controller: Intel Corporation Device 7e7e (rev 01)
Signed-off-by: Harsha B R <harsha.b.r@intel.com>
Change-Id: Ie150247661322e3944be15dc70f66033266d8aac
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72787
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch describes BB retimer for tcss_dma0 and tcss_dma1 with respect
to GPP_B21 as per schematics.
+--------------+------------+
| tbt_pcie_rp0 | tcss_dma0 |
+--------------+------------+
| tbt_pcie_rp1 | tcss_dma0 |
+--------------+------------+
| tbt_pcie_rp2 | tcss_dma1 |
+--------------+------------+
| tbt_pcie_rp3 | tcss_dma1 |
+--------------+------------+
BUG=b:224325352
BRANCH=None
TEST=Able to build and boot MTLRVP to ChromeOS. Verify the enumeration
of tbt_pcie_rp as part of lspci.
00:07.0 PCI bridge: Intel Corporation Device 7ec4
00:07.1 PCI bridge: Intel Corporation Device 7ec5
00:07.2 PCI bridge: Intel Corporation Device 7ec6
00:07.3 PCI bridge: Intel Corporation Device 7ec7
Signed-off-by: Harsha B R <harsha.b.r@intel.com>
Change-Id: Ie1a0026b064aa4f7fcd27e75c0b0d052ec620dcc
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72786
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch describes the TCSS USB ports for mtlrvp as per schematics.
This patch describes TCSS ports for UPC_TYPE_C_USB2_SS_SWITCH as below,
tcss_usb3_port1: USB3 Type-C Port C0
tcss_usb3_port2: USB3 Type-C Port C1
tcss_usb3_port3: USB3 Type-C Port C2
tcss_usb3_port4: USB3 Type-C Port C3
BUG=b:224325352
BRANCH=None
TEST=Able to build and boot MTLRVP to ChromeOS. Verify the enumeration
of xhci (0d.0) as part of lspci. Also verify the enumeration of Type-C
ports as part of cbmem -c.
Signed-off-by: Harsha B R <harsha.b.r@intel.com>
Change-Id: I0054ac4e3d1d9b97cfea615831ec8f3d3e00c9e0
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72785
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch enables FM350GL 5G WWAN support for mtlrvp.
BUG=b:224325352
BRANCH=None
TEST=Build and boot mtlrvp to ChromeOS. Ensure that WWAN module 00:1c.6
is enumerated as part of lspci and cbmem -c in AP console. Also verify
generation of PXSX Device as part of SSDT. Able to connect WiFi and
access internet.
cbmem -c:
\_SB.PCI0.RP07: Enable RTD3 for PCI: 00:1c.6 (Intel PCIe Runtime D3)
\_SB.PCI0.RP07: Enable WWAN for PCI: 00:1c.6 (Fibocom FM-350-GL)
SSDT:
Scope (\_SB.PCI0.RP07)
{
Device (PXSX)
Signed-off-by: Harsha B R <harsha.b.r@intel.com>
Change-Id: I870cc0782fb989f1bdbe369a4a12630a62729d8e
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72779
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Krishna P Bhat D <krishna.p.bhat.d@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
Fix EVENT_OP value according to ACPI specs:
https://uefi.org/specs/ACPI/6.5/20_AML_Specification.html?highlight=aml%20byte%20stream%20byte%20values#aml-byte-stream-byte-values
Change-Id: I8c531e95f4fc741926bc883d869816f534ff3b7f
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72805
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Coding style requires a space before the question mark in ternary
operators. Fix that.
Found by the linter.
Signed-off-by: Yuchen He <yuchenhe126@gmail.com>
Change-Id: I894d6efd5673e9ad5f166ae59967a8d4bb42fb06
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72484
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
To deprecate VBOOT_VBNV_CMOS [1], replace VBOOT_VBNV_CMOS with
VBOOT_VBNV_FLASH for samsung boards lumpy and stumpy. 0x8000 unused
flash space is allocated for RW_NVRAM.
Previously BOOT_DEVICE_SPI_FLASH_NO_EARLY_WRITES was selected for
CPU_INTEL_HASWELL, CPU_INTEL_MODEL_{2065X,206AX} and others (see [2]).
However, there seems to be no particular reason on those platforms.
We've dropped the config for haswell. Now drop it for
CPU_INTEL_MODEL_{2065X,206AX}, so that VBOOT_VBNV_FLASH can be enabled.
[1] https://web.archive.org/web/20230115020833/https://issuetracker.google.com/issues/235293589?pli=1
[2] commit 6c2568f4f58b9a1b209c9af36d7f980fde784f08
("drivers/spi: Add BOOT_DEVICE_SPI_FLASH_NO_EARLY_WRITES config")
BUG=b:235293589
TEST=./util/abuild/abuild -a -t SAMSUNG_LUMPY -x
Change-Id: I833edd4f7a328b21e81c971ba8a9aec0aad7d3d3
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70296
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
Since things are done a bit differently on Stoneyridge, it's probably
safer to run a test instead of assuming that the test on Picasso was
sufficient to be reasonably sure that this will also work as expected on
Stoneyridge.
TEST=No change of ACPI-related messages in dmesg with this patch.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I432752fae8be08d3cbd7d30215b350c4528c7206
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72495
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Create the constitution variant of the brask reference board by
copying the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0).
BUG=b:267539938
TEST=util/abuild/abuild -p none -t google/brya -x -a
make sure the build includes GOOGLE_CONSTITUTION
Change-Id: Idb6089561d3aa5aac4448f9d46347c731f027e9c
Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72730
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add a new set of errors that will be used by the introduced EFI
non-volatile variable store in flash.
Change-Id: I6baea9fb138d1a2755d22a3d587105793adb9c90
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61960
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
ACPI Revision 6.0 deprecates Processor keyword, so use
acpigen_write_processor_device() instead.
Change-Id: I31626f4e323dd9053a63c0f5e89d1685103e4bd4
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72487
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I85fc5dabf10c6df7f11fd1defe8a39afc9f95325
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72797
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
