summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2022-09-07mb/google/geralt: Pass reset gpio parameter to BL31Bo-Chen Chen
Pass the reset gpio parameter to BL31 to support SoC reset. TEST=build pass. BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: Ifdfbd6bd82f64b084f6349cb617443053c89a3f1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67357 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-07soc/mediatek: a common implementation to register BL31 resetHung-Te Lin
The implementations of register_reset_to_bl31() are the same for MedaiTek platforms, so we extract them to soc/common/bl31.c. BUG=None TEST=build pass Change-Id: I297ea2e18a6d7e92236cf415844b166523616bdf Signed-off-by: Hung-Te Lin <hungte@chromium.org> Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67359 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-09-07soc/mediatek/mt8188: Enable mfgpll properly and fix SPMI muxesJohnson Wang
Some of the pll settings are incorrect, which cause problems in GPU after booting into kernel. - MFGPLL opp_ck_en bit isn't located at MFGPLL_CON1, so we need to fix it to enable MFGPLL properly. - Switch SPMI clock muxes to 260M to avoid kernel hang while probing SPMI kernel driver. TEST=GPU bringup correctly. BUG=b:233720142 Signed-off-by: Johnson Wang <johnson.wang@mediatek.com> Change-Id: I971109a5f72e3307899daaf5a5f26022124b559b Reviewed-on: https://review.coreboot.org/c/coreboot/+/67355 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yidi Lin <yidilin@google.com>
2022-09-07mb/google/corsola: Fix ANX7625 power-on T4 sequenceZanxi Chen
The T4 of ANX7625 power on sequence should be larger than 0ms, but it's -59ms now. So add 70ms delay between DSI_TE and LCM_RST. BUG=b:242352915 TEST=The sequence T4 is larger than 0ms when power on. Change-Id: I6b888707ec3c0612e396564e77c4cdbe92614dc5 Signed-off-by: Zanxi Chen <chenzanxi@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67315 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: wen zhang <zhangwen6@huaqin.corp-partner.google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-09-06mb/google/skyrim/var/winterhold: Update devicetree settingEricKY Cheng
Initialize winterhold devicetree. BUG=b:241196632 TEST=emerge-skyrim coreboot Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com> Change-Id: I9fe224cdc2acb1f13d3bf9341b487892c15f8ea2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67308 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
2022-09-06src/soc/intel: remove force-included header compiler.h from fileMartin Roth
The header file `compiler.h` is automatically included in the build by the top level makefile using the command: `-include $(src)/commonlib/bsd/include/commonlib/bsd/compiler.h`. Similar to `config.h`, 'kconfig.h`, and 'rules.h`, this file does not need to be included manually, so remove it. Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: I5d3eb3f5e5f940910b2d45e0a2ae508e5ce91609 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67349 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2022-09-06src: remove force-included header rules.h from individual filesMartin Roth
The header file `rules.h` is automatically included in the build by the top level makefile using the command: `-include src/soc/intel/common/block/scs/early_mmc.c`. Similar to `config.h` and 'kconfig.h`, this file does not need to be included manually, so remove it. Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: I23a1876b4b671d8565cf9b391d3babf800c074db Reviewed-on: https://review.coreboot.org/c/coreboot/+/67348 Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-06mb/hp/z220_series: Add configs for integrated XHCIBill XIE
Without these, all SuperSpeed ports are wired to EHCI #2. "superspeed_capable_ports" and "xhci_switchable_ports" should fit both CMT and SFF variants, while "xhci_overcurrent_mapping" should be consistent with the first 4 elements of mainboard_usb_ports[]. With this commit, SuperSpeed devices plugged in SuperSpeed ports are wired to the XHCI on my own Z220 SFF. Signed-off-by: Bill XIE <persmule@hardenedlinux.org> Change-Id: Ifddecfd1d32ed6ab84d7eed8dc2d85d83cbebbcc Reviewed-on: https://review.coreboot.org/c/coreboot/+/67089 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-06mb/google/skyrim/var/winterhold: Add gpio override settingsEricKY Cheng
Follow FT6_SOC_GPIO_PM&Strap_20220815A.XLSX update Gpio setting BUG=b:240824497 BRANCH=None Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com> Change-Id: I2086c326cbf46ba6378d18d37dcbbe9fafa6b2bc Reviewed-on: https://review.coreboot.org/c/coreboot/+/67209 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-09-06allocator_v4: Disable top-down mode by defaultNico Huber
The top-down allocation feature was merged prematurely before platforms that don't report their resources correctly were fixed. Let's turn it off by default. Change-Id: I982e6d7355b9e689de10357d6c16ed718705270e Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67328 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Christian Walter <christian.walter@9elements.com>
2022-09-05Revert "allocator_v4: Treat above 4G resources more natively"Nico Huber
This reverts commit 117e436115484f0ce184114b22b716616592e77e. Depends on top-down allocation to keep the behavior to place hot-plug reservations above 4G. The latter was merged prema- turely, though. Change-Id: I5721cb84b29fc42240dff94f49a94461d88e7fbc Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67329 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Martin L Roth <gaumless@gmail.com>
2022-09-05soc/intel/alderlake: Remove dependency of FSP-S CpuMpPei ModuleSubrata Banik
This patch fixes a hidden issue present inside FSP-S while coreboot decides to skip performing MP initialization by overriding FSP-S UPDs as below: 1. CpuMpPpi ------> Passing `NULL` as coreboot assume FSP don't need to use coreboot wrapper for performing any operation over APs. 2. SkipMpInit -----> Set `1` to let FSP know that coreboot decided to skip FSP running CPU feature programming. Unfortunately, the assumption of coreboot is not aligned with FSP when it comes to the behaviour of `CpuMpPpi` UPD. FSP assumes ownership of the APs (Application Processors) upon passing `NULL` pointer to the `CpuMpPpi` FSP-S UPD. FSP-S creates its own infrastructure code after seeing the CpuMpPpi UPD is set to `NULL`. FSP requires the CpuMpPei module, file name `UefiCpuPkg/CpuMpPei/CpuMpPei.c`, function name `InitializeCpuMpWorker` to perform those additional initialization which is not relevant for the coreboot upon selecting the SkipMpInit UPD to 1 (a.k.a avoid running CPU feature programming on APs). Additionally, FSP-S binary size has increased by ~30KB (irrespective of being compressed) with the inclusion of the CpuMpPei module, which is eventually not meaningful for coreboot. Hence, this patch selects `MP_SERVICES_PPI_V2_NOOP` config unconditionally to ensure pass a valid pointer to the `CpuMpPpi` UPD and avoid APs getting hijacked by FSP while coreboot decides to set SkipMpInit UPD. Ideally, FSP should have avoided all AP related operations when coreboot requested FSP to skip MP init by overriding required UPDs. TEST=Able to drop CpuMpPei Module from FSP and boot to Chrome OS on Google/Redrix, Kano, Taeko devices with SkipMpInit=1. Without this patch: Here is the CPU AP logs coming from the EDK2 (open-source) [UefiCpuPkg/CpuMpPei/CpuMpPei.c] when coreboot sets `NULL` to the CpuMpPpi UPD. [SPEW ] Loading PEIM EDADEB9D-DDBA-48BD-9D22-C1C169C8C5C6 [SPEW ] Loading PEIM at 0x00076F9A000 EntryPoint=0x00076FA24E2 CpuMpPei.efi PROGRESS CODE: V03020002 I0 [SPEW ] Register PPI Notify: F894643D-C449-42D1-8EA8-85BDD8C65BDE [SPEW ] Notify: PPI Guid: F894643D-C449-42D1-8EA8-85BDD8C65BDE, Peim notify entry point: 76FA0239 AP Loop Mode is 2 GetMicrocodePatchInfoFromHob: Microcode patch cache HOB is not found. CPU[0000]: Microcode revision = 00000000, expected = 00000000 [SPEW ] Register PPI Notify: 8F9D4825-797D-48FC-8471-845025792EF6 Does not find any stored CPU BIST information from PPI! APICID - 0x00000000, BIST - 0x00000000 [SPEW ] Install PPI: 9E9F374B-8F16-4230-9824-5846EE766A97 [SPEW ] Install PPI: 5CB9CB3D-31A4-480C-9498-29D269BACFBA [SPEW ] Install PPI: EE16160A-E8BE-47A6-820A-C6900DB0250A PROGRESS CODE: V03020003 I0 With this patch: No instance of `CpuMpPei` has been found in the AP UART log with FSP debug enabled. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I8ebe0bcfda513e79e791df7ab54b357aa23d295c Reviewed-on: https://review.coreboot.org/c/coreboot/+/66706 Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-09-05ec/google/chromeec: Modify ufp from type-c roleDtrain Hsu
In order to fix the USB port of type-C dongle has no function after reboot/shutdown, modify ufp which is in google_chromeec_usb_pd_get_info from the bit1 of type-c role (PD_CTRL_RESP_ROLE_DATA). BUG=b:239138412 TEST=Built coreboot image and verified that using this patch can detect usb drive after reboot. Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: I73a4a6ec37129388783599125f067068d155d93f Reviewed-on: https://review.coreboot.org/c/coreboot/+/67168 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-04mb/google/rex: Correct GPSI0 muxing for pads requiring NF8Tarun Tuli
GSPI0 pads required muxing to NF8. Support for extended native functions was added in commit b6c32d7fe4ea98ba8b3a10cb5ce46448801855b8 BUG=b:244610269 TEST=build and booted on Rex Change-Id: Iab4e0bc6890cd8e976c513fe87dda0da9b5f2ee0 Signed-off-by: Tarun Tuli <taruntuli@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67317 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
2022-09-04drivers/intel/dptf: Add multiple fan support under dptfSumeet Pawnikar
Add multiple fan support for dptf policies BUG=b:235254828 BRANCH=None TEST=Built and tested on Redrix system for two fans Change-Id: I96ead90e3b805bd20de03e4bef4fa4b9fbaaaedd Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65611 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-09-04mb/google/brya/var/ghost: Delete variantJack Rosenthal
This project concluded and the coreboot implementation is no longer required. BUG=b:244596639 BRANCH=firmware-brya-14505.B TEST=none Signed-off-by: Jack Rosenthal <jrosenth@chromium.org> Change-Id: Ie647dac7ad4879ec1b11baa0a8cb0990af56852f Reviewed-on: https://review.coreboot.org/c/coreboot/+/67299 Reviewed-by: Caveh Jalali <caveh@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-04mb/google/dedede/var/shotzo: Update DPTF parametersTony Huang
Update DPTF parameters from internal thermal team. BUG=b:244373677 BRANCH=firmware-dedede-13606.B TEST=Build image and verified by thermal team. Change-Id: I8415e0d25a79764f0c1d11688728b7caa3b3d6a4 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67214 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2022-09-04allocator_v4: Treat above 4G resources more nativelyNico Huber
We currently have two competing mechanisms to limit the placement of resources: 1. the explicit `.limit` field of a resource, and 2. the IORESOURCE_ABOVE_4G flag. This makes the resource allocator unnecessarily complex. Ideally, we would always reduce the `.limit` field if we want to "pin" a specific resource below 4G. However, as that's not done across the tree yet, we will use the _absence_ of the IORESOURCE_ABOVE_4G flag as a hint to implicitly lower the `limit` of a resource. In this patch, this is done inside the effective_limit() function that hides the flag from the rest of the allocator. To automatically place resources above 4G if their limit allows it, we have to allocate from top down. Hence, we disable the prompt for RESOURCE_ALLOCATION_TOP_DOWN if resources above 4G are requested. One implication of the changes is that we act differently when a cold-plugged device reports a prefetchable resource with 32-bit limit. Before this change, we would fail to allocate the resource. After this change, it forces everything on the same root port below the 4G line. A possible solution to get completely rid of the IORESOURCE_ABOVE_4G flag would be rules to place resources of certain devices below 4G. For instance, the primary VGA device and storage and HID devices could be made available to a payload that can only address 32 bits. For now, effective_limit() provides us enough abstraction as if the `limit` would be the only variable to consider. With this, we get rid of all the special handling of above 4G resources during phase 2 of the allocator. Which saves us about 20% of the code :D Change-Id: I4c7fcd1f5146f6cc287bd3aa5582da55bc5d6955 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65413 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-04pciexp_device: Propagate above-4G flag to all hotplug devicesNico Huber
The `IORESOURCE_ABOVE_4G` flag was only explicitly set for our dummy device that reserves resources behind a hotplug port. The current re- source allocator implicitly extends this to all devices below the port, including real ones. Let's make that explicit, so future changes to the allocator can't break this rule. Change-Id: Id4c90b60682cf5c8949cde25362d286625b3e953 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66719 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-09-04allocator_v4: Introduce RESOURCE_ALLOCATION_TOP_DOWNNico Huber
Add option to resource allocator v4 that restores the top-down allocation approach at the domain level. This makes it easier to handle 64-bit resources natively. With the top-down approach, resources that can be placed either above or below 4G would be placed above, to save precious space below the 4G boundary. Change-Id: Iaf463d3e6b37d52e46761d8e210034fded58a8a4 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41957 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-09-04mb/prodrive/hermes: Use snake case for identifiersAngel Pons
There's no reason to use camel case for EEPROM region names or local variables. Use snake case for consistency with coreboot's code style. Change-Id: Id1200a0c778095b109d824a1ca4e3e69591e4165 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67274 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Martin L Roth <gaumless@gmail.com>
2022-09-04vc/intel/fsp: Update ADL N FSP headers from v3267.01 to v3301.00Saurabh Mishra
Update generated FSP headers for Alder Lake N from v3267.01 to v3301.00. Changes include: - FspsUpd.h: 1. Add VccInAuxImonSlope UPD 2. Update UPD Offset in FspsUpd.h BUG=b:242152105 BRANCH=None TEST=Build using "emerge-nissa intel-adlnfsp"and boot Nissa. Change-Id: I7b921e2aa467593a1c764fc554e2e83e8bb526e8 Signed-off-by: Saurabh Mishra <mishra.saurabh@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67167 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Reka Norman <rekanorman@chromium.org> Reviewed-by: Kangheui Won <khwon@chromium.org>
2022-09-04device/i2c_bus: Add routines to read and write multiple bytesWerner Zeh
Some devices require that several bytes are written with a single I2C write command. Extend the i2c_bus interface functions and add both, read and write for more than one byte at a defined byte offset. Change-Id: I0eec2e1d4185170f02b4ab35aa6546dc69569303 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67098 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2022-09-04security/vboot/tpm: Avoid duplicate vb2api_secdata_firmware_create callsYu-Ping Wu
For TPM2, vb2api_secdata_firmware_create() is already called from setup_firmware_space() from _factory_initialize_tpm(). Therefore move the duplicate call from factory_initialize_tpm() to TPM1's _factory_initialize_tpm(). Change-Id: I892df65c847e1aeeabef8a7578bec743b639a127 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67219 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aseda Aboagye <aaboagye@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2022-09-03soc/intel: Add SI_DESC region to GSCVD rangesJulius Werner
Intel platforms have soft straps stored in the SI_DESC FMAP section which can alter boot behavior and may open up a security risk if they can be modified by an attacker. This patch adds the SI_DESC region to the list of ranges covered by GSC verification (CONFIG_VBOOT_GSCVD). Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I0f1b297e207d3c6152bf99ec5a5b0983f01b2d0b Reviewed-on: https://review.coreboot.org/c/coreboot/+/66346 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-02cbfs/vboot: Adapt to new vb2_digest APIJulius Werner
CL:3825558 changes all vb2_digest and vb2_hash functions to take a new hwcrypto_allowed argument, to potentially let them try to call the vb2ex_hwcrypto API for hash calculation. This change will open hardware crypto acceleration up to all hash calculations in coreboot (most notably CBFS verification). As part of this change, the vb2_digest_buffer() function has been removed, so replace existing instances in coreboot with the newer vb2_hash_calculate() API. Due to the circular dependency of these changes with vboot, this patch also needs to update the vboot submodule: Updating from commit id 18cb85b5: 2load_kernel.c: Expose load kernel as vb2_api to commit id b827ddb9: tests: Ensure auxfw sync runs after EC sync This brings in 15 new commits. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I287d8dac3c49ad7ea3e18a015874ce8d610ec67e Reviewed-on: https://review.coreboot.org/c/coreboot/+/66561 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
2022-09-02amdblocks/alib.h: Add DPTC parameter IDsTim Van Patten
Add additional DPTC parameter IDs that are necessary when throttling the SOC due to low/no battery. These additional parameters are used in later CLs. BRANCH=none BUG=b:217911928 TEST=Build zork TEST=Build nipperkin TEST=Build skyrim Signed-off-by: Tim Van Patten <timvp@google.com> Change-Id: I9e944d7c620414ec92d08a3d1173ba281d593ffc Reviewed-on: https://review.coreboot.org/c/coreboot/+/67182 Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-09-02mb/google/skyrim: Remove elog_gsmi_cb_mainboard_log_wake_sourceRaul E Rangel
elog_gsmi_cb_mainboard_log_wake_source is called from SMI and causes eSPI transactions. If the SMI interrupts an ongoing eSPI transaction from the OS it will conflict and cause failures. Removing this call to avoid conflicts. This can be re-enabled after refactoring google_chromeec_get_mask to use ACPI MMIO. This is a copy of CB:63280 but for skyrim. BUG=b:227163985, b:243557044 TEST=suspend/resume skyrim and no longer see EC wake sources in elog. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Iac56840fe15101bc556d8cce9960f761c6ea7181 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67184 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jon Murphy <jpmurphy@google.com>
2022-09-02mb/google/rex: Enable DSP UPDEric Lai
Enable DSP setting. Make sure the SSP can work as expected. BUG=b:243123156 TEST=Dev beep working on Rex. Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Change-Id: I6ae28e414ac4ac33f596df57691c979eac5fe132 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67270 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com> Reviewed-by: Tarun Tuli <taruntuli@google.com>
2022-09-02soc/intel/cmn/graphics: Use pci_dev_request_bus_master for BM enablingSubrata Banik
Enabling Bus Master isn't required by the hardware, so we shouldn't need to enable it at all. However, some payloads do not set this bit before attempting DMA transfers, which results in functionality failure. For example: in this case, unable to see the developer screen in Depthcharge. In the prior IA SoC platform, FSP/GFX PEIM does the BM enabling for the IGD BAR resources but starting with the MTL platform, it fails to do so resulting into inability to see the Pre-OS display. BUG=b:243919230 ([Rex] Unable to see Pre-OS display although GFX PEIM Display Init is successful during AP boot) TEST=Able to see the developer screen with eDP/HDMI while booting the Google/Rex. Also, this change doesn't impact the previous platforms (ADL, TGL, CML etc.) where the BM is default enabled. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I9ad9eee8379b7ea1e50224e3fabb347e5f14c25b Reviewed-on: https://review.coreboot.org/c/coreboot/+/67273 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2022-09-01mb/google/guybrush: select SYSTEM_TYPE_LAPTOPMatt DeVillier
Select SYSTEM_TYPE_LAPTOP so the FADT PM profile is correctly set to mobile (vs the default of desktop). TEST=build/boot google/dewatt, run FWTS and verify FADT PM profile correct Change-Id: I480fbe85782e2c63efa8d2212d503a47d8149ab9 Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67245 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-09-01mb/google/skyrim: Add missing USB ports to device treeRaul E Rangel
As part of investigating b/240690391 I noticed that we were missing the daughter board ports. Not all SKUs have these ports connected, but it doesn't hurt to have the extra ACPI nodes. BUG=none TEST=build Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Id6fc34acbfa30bc15e697043bf93bcf584256128 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66605 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jon Murphy <jpmurphy@google.com>
2022-09-01drivers/elog/gsmi.c: Fix compiling for 64bitArthur Heymans
Change-Id: Ic8e04ae043145a3633c0b8379a797724f95fd7ea Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65880 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-09-01amd/*/Makefile.inc: Put common words into common Makefile.incZheng Bao
Definition of FIRMWARE_LOCATION, POUND_SIGN, DEP_FILES, amd_microcode_bins are moved to common Makefile.inc. Change-Id: I5a0ea27002e09d0b879bafad37a5d418ddb4e644 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62658 Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jon Murphy <jpmurphy@google.com>
2022-09-01vendorcode/intel/fsp2/glk: Add the FSP headers for version 2.2.3.1Sean Rhodes
Add the headers for 2.2.3.1, which includes the following changes over 2.2.0.0: • [Implemented]GLK: XHCLKGTEN Register setting causes S0ix entry failure in less than 5 cycles when a USB2 Ethernet Dongle is connected. Refer GLK BIOS Spec Volume1 CDI# 571118 under chapter 7.20.6 for new Register settings. • [Implemented] [GLK/GLK-R] DDR4 16Gb SDP Memory support for Gemini Lake/Gemini Lake – R • [Update] MRC new version update to 1.38. • [Fixed][GLK-R][WLAN] Removed the DSW function - Wake on LAN from S4 issue with latest Wifi driver. [Update] MRC new version update to 1.39. Included fix for MinRefRate2xEnable and support for Rowhammer mitigation. • [Fixed] Disable Dynamic DiffAmp and set CTLE from 7 to 5. This change specific to DDR4 memory configuration. • GLK Klocwork Fix • [Update] MRC new version update to 1.40. Added in a separate directory as the default. The 2.2.0.0 headers were left and will be used for Google boards, as some offsets have moved. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I09498368b116c2add816eeada2fa4d0dba6e5765 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64533 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2022-09-01mb/google/brya/acpi: Save/restore/clear some registers over GC6Tim Wawrzynczak
Nvidia recommends saving and restoring the LTR Enable bit in PCIe config space for the PCIe root port before/after GC6 entry. Also the detectable error bit should be cleared, as there may be errors expected during the GC6 flow. BUG=b:214581763 TEST=no more correctable errors after GC6 entry/exit Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I058ce1b3f17fb6cc59785a85efaf9ea0504cf2ee Reviewed-on: https://review.coreboot.org/c/coreboot/+/66808 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Anil Kumar K <anil.kumar.k@intel.corp-partner.google.com> Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
2022-09-01mb/google/nissa: Mark PCIe wifi device as untrustedReka Norman
BUG=b:238937091 TEST=Dump SSDT on nereid and check that the wifi device contains the DmaProperty. Also check that the kernel marks the device as untrusted. Change-Id: I0725ea18d52420a3161d6fcfa3bcb72ebe35f3a5 Signed-off-by: Reka Norman <rekanorman@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67194 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org>
2022-08-31soc/amd/mendocino/Kconfig: select extended eSPI decode range supportFelix Held
Select SOC_AMD_COMMON_BLOCK_ESPI_EXTENDED_DECODE_RANGES and remove the TODO from SOC_AMD_COMMON_BLOCK_HAS_ESPI. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I90e3bf3f196e22b428b01ea0437c1224702d2b44 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64055 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jon Murphy <jpmurphy@google.com>
2022-08-31acpi: Replace EC_ENABLE_AMD_DPTC_SUPPORT with Kconfig valueTim Van Patten
Compile-time support of DPTC is controlled by EC_ENABLE_AMD_DPTC_SUPPORT in each variant's ec.h file. This CL removes EC_ENABLE_AMD_DPTC_SUPPORT and replaces it with the Kconfig value SOC_AMD_COMMON_BLOCK_ACPI_DPTC. Each variant's run-time support of DPTC continues to be controlled by the variant's overridetree.cb "dptc_enable" value. BRANCH=none BUG=b:217911928 TEST=Build zork TEST=Boot skyrim Signed-off-by: Tim Van Patten <timvp@google.com> Change-Id: Ic101e74bab88e20be0cb5aaf66e4349baa1432e3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67180 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-08-31soc/intel/alderlake: Add new pcie5 alias for raptorlakeBora Guvendik
Pcie5_1 is added for DID 0xA72Dh and BDF 0/1/1. References: RaptorLake External Design Specification Volume 1 (640555) BUG=b:229134437 BRANCH=firmware-brya-14505.B TEST=Boot to OS Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Change-Id: Id7440bf202d5560ff92807877d48b94054cb1de9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67108 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-08-31mb/amd/chausie/Kconfig: Re-enable ESPI_RETAIN_PORT80Fred Reitberger
Chausie fails to boot without this option set. Enable in the mainboard rather than the SoC Kconfig to not impact Skyrim. TEST=boot to OS Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com> Change-Id: I9f2a1be9eddb9e17407d00ff50ceb70a2718ce3c Reviewed-on: https://review.coreboot.org/c/coreboot/+/67175 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-08-31soc/mediatek/mt8188: Add SPM loader and initialize SPM in RAM stageRex-BC Chen
Add support for loading SPM firmware from CBFS to SPM SRAM. SPM needs its own firmware to enable SPM suspend/resume function which turns off several resources such as DRAM/mainpll/26M clk when linux system suspend. SPM is an essential component on MediaTek SoC, so we initialize PPM in soc_init(). For MT8188, SPM will handshake with DPM to do initialization, so we need to call spm_init() after dpm_init(). This SPM flow adds 33ms to the boot time. firmware log: mtk_init_mcu: Loaded (and reset) spm_firmware.bin in 25 msecs SPM: spm_init done in 33 msecs, spm pc = 0x400 TEST=spm pc is 0x400 which is in idle state. BUG=b:236331724 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I1a1f49383e0ceadc259a18272fc1c277b65406ae Reviewed-on: https://review.coreboot.org/c/coreboot/+/66973 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-08-31soc/mediatek: Move some SPM functions to commonBo-Chen Chen
Some functions are the same in spm.c for MT8192, MT8195, MT8186 and MT8188, so we move them to common/spm.c. TEST=build pass. BUG=b:236331724 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I29ddefc47d8bd156fa1ca0cedd4deaed676ae7e4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66972 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-08-31soc/mediatek/mt8188: Use MHz as unit for current_clkBo-Chen Chen
The unit of current_clk in pmif_ulposc_check() should be MHz. We use pmif_get_ulposc_freq_mhz() to get the default hardware value in MHz. Without this modification, the judgement in pmif_ulposc_check() is alway wrong due to the wrong unit. TEST=build pass. BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I3bf80a23bb35ff657023eb4b7e009fa233f61244 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66971 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-08-31soc/mediatek/mt8188: Add DEVAPC basic driverNina Wu
Add basic DEVAPC (device access permission control) driver. DEVAPC driver is used to set up bus fabric security and data protection among hardwares. DEVAPC driver groups the master hardwares into different domains and gives secure and non-secure property. The slave hardware can configure different access permissions for different domains via DEVAPC driver. 1. Initialize DEVAPC. 2. Set master domain and secure side band. 3. Set default permission. TEST=check logs of DEVAPC ok. BUG=b:236331724 Signed-off-by: Nina Wu <nina-cm.wu@mediatek.com> Change-Id: Iad3569bc6f8ba032d478934ba839dc4b5387bafc Reviewed-on: https://review.coreboot.org/c/coreboot/+/66970 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-08-31soc/mediatek: Move common DEVPAC enums and functions to commonBo-Chen Chen
Some enums and functions are the same in DEVAPC driver for MT8195, MT8186, and MT8188, so we move them to common folder. TEST=build pass. BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: Ia7d2145780780fd54b76952db96424b8ea477594 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67171 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-08-31device/dram/ddr4.c: note that dimm size calculation won't work for 3DSKrystian Hebel
Change-Id: I52548e544165b4732d9989da6455c8fd77bf99d3 Signed-off-by: Krystian Hebel <krystian.hebel@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67185 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2022-08-31device/dram/ddr4.c: fill missing ECC info from SPDKrystian Hebel
Change-Id: I80fccfa6d108b68d6f33a3d47766205b423a41ff Signed-off-by: Krystian Hebel <krystian.hebel@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67058 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2022-08-31soc/mediatek/mt8188: Initialize DPM in ramstageXi Chen
Add initialization of DPM drvier for DRAM low power mode. DPM is an essential component on MediaTek SoC, so we initialize DPM in soc_init(). This DPM flow adds 22ms to the boot time. coreboot logs: CBFS: Found 'dpm.dm' @0x156c0 size 0xfc in mcache @0xfffdd110 mtk_init_mcu: Loaded (and reset) dpm.dm in 6 msecs (422 bytes) CBFS: Found 'dpm.pm' @0x15800 size 0x3c59 in mcache @0xfffdd140 mtk_init_mcu: Loaded (and reset) dpm.pm in 16 msecs (18910 bytes) TEST=build pass BUG=b:236331724 Signed-off-by: Xi Chen <xixi.chen@mediatek.corp-partner.google.com> Change-Id: I46baa7b49e90d53dd4d1d95af9c46622faf30419 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66969 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-31soc/mediatek/mt8188: Support 4 channel DRAM in DPM init flowXi Chen
TEST=build pass BUG=b:236331724 Signed-off-by: Xi Chen <xixi.chen@mediatek.corp-partner.google.com> Change-Id: Ia68aca1d1e8729739246157904727123e5d001e8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66968 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-31soc/mediatek/mt8188: Add DPM firmware filesXi Chen
DPM is a hardware module for DRAM power management, which is used for DRAM low power mode. TEST=build pass BUG=b:236331724 Signed-off-by: Xi Chen <xixi.chen@mediatek.corp-partner.google.com> Change-Id: I872396fe2c5accd92ba5c14b124125bd58257771 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66967 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-31soc/mediatek: Move dpm_4ch.c to commonXi Chen
MT8195 and MT8188 share the same dpm_4ch.c, so we move it to common folder. TEST=build pass BUG=b:236331724 Signed-off-by: Xi Chen <xixi.chen@mediatek.corp-partner.google.com> Change-Id: I13406707d3b331ced57af62f4ba4f365e9ac4f84 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66966 Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-08-31allocator_v4: Completely ignore resources with 0 limitNico Huber
It seems pass 1 and 2 were inconsistent. The first would account for resources with a limit of 0 even though the second can't assign anything for them. Change-Id: I86fb8edc8d4b3c9310517e07f29f73a6b859a7c4 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65402 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-08-31mb/google/rex: Correct EC-is-trusted logicKapil Porwal
Fix EC_IN_RW config for Rex. Dauntless on Rex does not have an EC_IN_RW GPIO pin. Port of commit 7f339c6050c5 ("mb/google/corsola: Correct EC-is-trusted logic") BUG=b:243950850 TEST=Built and booted to Google Rex. Signed-off-by: Kapil Porwal <kapilporwal@google.com> Change-Id: I97e5c752b4f36c9221137903f755837880f6b1c4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67208 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Tarun Tuli <taruntuli@google.com>
2022-08-31Revert "mb/google/rex: Disable LID_SHUTDOWN"Subrata Banik
This reverts commit 47fee08fc3a383e14dc974754d6e463fa320badf. The required EC changes are now in place to revert this W/A that disables the LID based shutdown. BUG=b:243920003 TEST=No shutdown request has triggered while booting AP at depthcharge. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I5ae56912f030f6f0e3cb49282bbffc920fb389c0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67206 Reviewed-by: Tarun Tuli <taruntuli@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
2022-08-31vendorcode/intel/fsp: Add Raptor Lake FSP headers for FSP v3301.03Selma Bensaid
The headers added are generated as per FSP v3301.03 In the future, when Alder Lake and Raptor Lake fsp align, Raptor Lake fsp headers can be deleted and Raptor Lake soc will also use headers from alderlake/ folder. BUG=b:243693364 BRANCH=firmware-brya-14505.B TEST=Boot to OS Signed-off-by: Selma Bensaid <selma.bensaid@intel.com> Change-Id: Idbd39ed53d4ba05248a0e83c104846960253931e Reviewed-on: https://review.coreboot.org/c/coreboot/+/67084 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2022-08-30mb/google/skyrim: Fix APCB_SBR_D5.gen build rulesKarthikeyan Ramasubramanian
CB:66978 introduced an incorrect condition to check for the presence of SPD binaries to be injected into APCB_SBR_D5.gen. This caused the SPDs to be not injected into the APCB and hence the system fails to boot. Fix it by updating the path of the SPD binaries correctly. BUG=b:244173966 TEST=Build and boot to OS in Skyrim. Change-Id: I5efa634fafdcc4769dfad5f533d5512e7c03644f Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67210 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-08-30soc/intel/cmn/block/acpi: Add new GPIO ASL MethodTim Wawrzynczak
Ths new Method, GSCI, allows control over whether or not IRQs are routed as SCI#s for the given GPIO. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: Ic61caaf77d2c6e295e67a1501544e8b8fc6f3b6a Reviewed-on: https://review.coreboot.org/c/coreboot/+/66813 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-30mb/google/nipperkin: Set BT enable_delay_ms to 10msRob Barnes
Override bluetooth enable_delay_ms to 10ms, per advise from vendor. BUG=b:233369179 BRANCH=guybrush TEST=Boot nipperkin, connect to headset, suspend and reboot, headset still functions. Change-Id: Ic00de6704018f27339512929f85531aa72205b0e Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67177 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jon Murphy <jpmurphy@google.com>
2022-08-30mb/google/guybrush: Set BT enable_delay_ms to 200msRob Barnes
Set bluetooth enable_delay_ms to 200ms. 200ms is the lowest common denominator between the two BT chipsets. BUG=b:233369179,b:236289478 BRANCH=guybrush TEST=Connect to headset, suspend and reboot, headset still functions Change-Id: Id4c23de37351d28d02aaa797fa19ff49e9dfa76c Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65180 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jon Murphy <jpmurphy@google.com>
2022-08-30soc/intel/cmn/block/acpi: Modify GPIO Methods to use bitfieldsTim Wawrzynczak
IMHO, using bitfields directly in the Field declaration makes the ASL code more readable then directly manipulating the entire 32-bit dword. TEST=ACPI code using several of these Methods still works (google/agah dGPU ACPI code) Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I9909700022d8b55db3f5208010bdff11ddaf4e7d Reviewed-on: https://review.coreboot.org/c/coreboot/+/66812 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-30mb/google/brya/variants/nivviks: Define DPTF policies for NirwenVidya Gopalakrishnan
Added DPTF passive, critical, active policies for Nirwen. Added additional TSR for Nivviks and updated the PL2 time window Ref: EDS doc#645550 BUG=b:238713292 TEST= Boot to OS and verify dptf policies are set based on fw_config. Signed-off-by: Vidya Gopalakrishnan <vidya.gopalakrishnan@intel.com> Change-Id: Iae46736d8d7723a20983dcaad42a7007d76cfad8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66833 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Reka Norman <rekanorman@chromium.org> Reviewed-by: V Sowmya <v.sowmya@intel.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2022-08-30mb/google/nissa: Configure the DPTF policies based on fw_configV Sowmya
This change adds support to configure the DPTF policies based on the fw_config THERMAL_SOLUTION. BUG=b:238713292 TEST=Boot to OS and verify that dptf policies are set based on fw_config. Signed-off-by: V Sowmya <v.sowmya@intel.com> Change-Id: I0ffb9d7cc6c963add001a31ba23a6d6c351dd621 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66589 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Reka Norman <rekanorman@chromium.org>
2022-08-30mb/google/brya/vell: Update amp SSIDShon Wang
The current subsystem ID used by the amps may end up getting used again for future products, therefore this CL updates the subsystem ID to 103C8C08, which was specifically generated for this amp. BUG=b:202484541 BRANCH=brya TEST='FW_NAME=vell emerge-brya coreboot' Change-Id: I399d8d99ead4fb6fdfa24c2a7a3e3d5e63603b8b Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67014 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-08-30mb/google/skyrim/var/winterhold: Update memory and RAMID tableEricKY Cheng
Update memory and RAMID table BRANCH=None BUG=b:243337816 TEST= emerge-coreboot Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com> Change-Id: Iec3c2098be86661249b1786a02f0768f9d8ad0ff Reviewed-on: https://review.coreboot.org/c/coreboot/+/67106 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Amanda Hwang <amanda_hwang@compal.corp-partner.google.com> Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
2022-08-30mb/google/rex: Change GPP_A17 programmingTarun Tuli
To match byra commit 7c2514fc072f95eed6483518811fb6c39f780f5b (mb/google/brya: Change GPP_F17 programming), update A17 pad configuration to the APIC only. TEST=Verified booting to OS on Google/Rex. Signed-off-by: Tarun Tuli <taruntuli@google.com> Change-Id: Ie9f071dc4a2755dd1f396e2afe730ead66bb1dd0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67183 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-30amd/soc/common: Update CPPC valueZheng Bao
The CPPC table value for UEFI BIOS has been changed. The code has been merged to AGESA. We can get the value by dumping ACPI table. Then we align the coreboot code with the new value. BUG=b:190420984 Change-Id: I091ab3bbc5f94961f8b366a3fa00f50f5c9fa182 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63632 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-08-30mb/google/nissa: Mark CNVi wifi device as untrustedReka Norman
BUG=b:238937091 TEST=Dump the SSDT on nivviks and check that the wifi device has the DmaProperty. Change-Id: I910b7da7050f9aebfe0eb58552c82b1b29de3772 Signed-off-by: Reka Norman <rekanorman@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67044 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org>
2022-08-29mb/prodrive/atlas: Fix SMBUS/SPD addressesMaximilian Brune
Commit 0e7cf3d81d121181a94b6a594b944628c2e5a939 (soc/intel/alderlake: Fix DDR5 channel mapping) fixed a bug in SoC code that messed up DDR5 SPD address mapping. Atlas uses the 0x50/0x52 addresses. However, the SoC code bug required commit 044883615d4471b7a0b883eb8b8224d95faf52af (mb/prodrive/atlas: Update correct SPD address) so that at least some RAM would work. Now that the SoC code bug is fixed, the workaround is no longer needed, so use the correct SPD address mapping. TEST=Boot Atlas and verify that both memory channels work Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com> Change-Id: I352d8f36eec63cffd3f63ab6e7421db16ca30163 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67075 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-08-29soc/intel/alderlake: Rename pcie5 aliasBora Guvendik
Rename pcie5 alias as pcie5_0 since raptorlake is adding a new pcie5 RC. BRANCH=firmware-brya-14505.B TEST=none Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Change-Id: Iee669e68e3607b7ffec9f0800e9f0a916defd498 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67107 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-08-29soc/amd/mendocino/psp_verstage/svc: Fix reset_system typeKarthikeyan Ramasubramanian
The size of the input parameter to RESET_SYSTEM svc call is expected to be 4 bytes. Fix the reset_system type from enum to uint32_t. BUG=b:243476183 TEST=Build and boot to OS in Skyrim with PSP verstage. Trigger a system reset to ensure that the system is reset successfully. Change-Id: I6319a1dfc89602722c1c2b1c4ee744493ae8b33f Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67117 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-29pciexp: Move PCI path check one level up to pciexp_enable_ltr()Nico Huber
If we have a PCIe root port without `ops_pci` or without `get_ltr_max_latencies`, the parent device wouldn't be PCI. Hence, check for a PCI path early. Change-Id: I358cb6756750bb10d0a23ab7133b917bfa25988b Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66845 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Zhang <jonzhang@fb.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2022-08-29drivers/i2c/tpm: Remove TI50_FIRMWARE_VERSION_NOT_SUPPORTEDReka Norman
This workaround was added since reading the firmware version on Ti50 versions < 0.0.15 will cause the Ti50 to become unresponsive. No one is using Ti50 this old anymore, so remove the workaround. BUG=b:224650720,b:236911319 TEST=Boot to OS on nivviks with Ti50 0.22.4. Check the log contains the firmware version: [INFO ] Firmware version: Ti50/D3C1 RO_B:0.0.26/- RW_B:0.22.4/ti50_common:v095c Change-Id: I3628b799e436a80d0512dabd356c4b2566ed600a Signed-off-by: Reka Norman <rekanorman@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67138 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2022-08-27soc/mediatek/mt8188: Enable USE_CBMEM_DRAM_INFOXi Chen
The feature "USE_CBMEM_DRAM_INFO" is supported in MT8188. Therefore, we select this configuration to enable it. TEST=build pass BUG=b:233720142 Signed-off-by: Xi Chen <xixi.chen@mediatek.com> Change-Id: I14f3d971fe861cbd09cc86c8a5a1fb531bfe78d7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66280 Reviewed-by: Yidi Lin <yidilin@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-27soc/mediatek: Move emi.c to common folderRex-BC Chen
The emi.c is the same for MT8186 and MT8188, so we could move it to the common folder and reuse it. TEST=build pass BUG=b:236331724 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I225f1d07c973129172f01bf7f4d7f5d5abe7c02b Reviewed-on: https://review.coreboot.org/c/coreboot/+/66328 Reviewed-by: Yidi Lin <yidilin@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-27drivers/mrc_cache: Don't compute checksum if TPM hash is usedReka Norman
When MRC_SAVE_HASH_IN_TPM is selected, mrc_data_valid() uses the TPM hash to verify the MRC cache data, not the checksum. However, we still calculate the checksum when updating the cache. Skip this calculation when MRC_SAVE_HASH_IN_TPM is selected to save boot time. On nissa, this reduces boot time by ~14 ms: Before: 3:after RAM initialization 854,298 (28,226) After: 3:after RAM initialization 849,626 (14,463) Note, the reason the calculation is so slow is that the new MRC data lives in CBMEM, which is not yet marked as cacheable in romstage. BUG=b:242667207 TEST=MRC caching still works as expected on nivviks. After clearing the MRC cache, memory training happens on the next boot, but doesn't on subsequent boots. Change-Id: Ifbb75ecfa17421c0565aec1f3eb48d950244f821 Signed-off-by: Reka Norman <rekanorman@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67042 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Shelley Chen <shchen@google.com>
2022-08-27mb/google/corsola: Add new board Magikarpvan_chen
Add a new board 'Magikarp', and enable SDCARD_INIT for it. BUG=b:242822419 BRANCH=None TEST=none Change-Id: Id7432e33b6fd5f1c25536cf068ff76612575e8ee Signed-off-by: van_chen <van_chen@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67043 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Chen-Tsung Hsieh <chentsung@chromium.org>
2022-08-27soc/mediatek/mt8188: Add DRAM fast calibration supportXi Chen
Define fields of sdram_params and enable MEDIATEK_BLOB_FAST_INIT to run fast calibration for MT8188 using blob. DRAM fast calibration logs: DRAM-K: Fast calibration passed in 19530 msecs dram size (romstage): 0x200000000 TEST=Fast calibration pass. BUG=b:233720142 Signed-off-by: Xi Chen <xixi.chen@mediatek.com> Change-Id: I2468d971fe861cbd09cc86c8a5a1fb531bfe78d7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66279 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-08-27mb/google/geralt: Fully calibrate DRAMXi Chen
Initialize and calibrate DRAM in romstage. DRAM full calibration logs: dram_init: dram init end (result: 0) DRAM-K: Full calibration passed in 50176 msecs TEST=Full calibration pass. BUG=b:233720142 Signed-off-by: Xi Chen <xixi.chen@mediatek.com> Change-Id: I31f5693ffe4a1e30defbc8a96dc128de03d6b7e7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66278 Reviewed-by: Yidi Lin <yidilin@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-27soc/mediatek/mt8188: Add DRAM full calibration supportXi Chen
- Use common SoC drivers for DRAM calibration support. - Remove emi.h because sdram_size() is already declared in common/include/soc/emi.h. - Add dramc_param.h and dramc_soc.h to prepare for implementation of DRAM full calibration. TEST=build pass BUG=b:233720142 Signed-off-by: Xi Chen <xixi.chen@mediatek.com> Change-Id: I2f88d971fe861cbd09cc86c8a5a1fb531bfe78d7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66277 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yidi Lin <yidilin@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-08-27mb/google/rex: Disable LID_SHUTDOWNSubrata Banik
This patch disables LID based shutdown requests. Google/Rex platform receives a forced shutdown request while booting to depthcharge due to EC wrongly detecting the LID is being closed. For now disable the LID based shutdown behaviour in depthcharge unless the EC issue gets resolved. BUG=b:243920003 TEST=Depthcharge no longer sees the force shutdown request now. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I03e33ea4d04dc48331d1cf98c47786b2a184c258 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67103 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2022-08-26soc/intel/meteorlake: Update MTL_USE_COREBOOT_MP_INIT descriptionSridhar Siricilla
The patch update MTL_USE_COREBOOT_MP_INIT Kconfig description. TEST=Build code for MTL Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I38609cb03714084dd9092f41dd6e5b418a7f120a Reviewed-on: https://review.coreboot.org/c/coreboot/+/67077 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tarun Tuli <taruntuli@google.com>
2022-08-26ec/google/chromeec: Call PNOT() when Battery Status ChangesTim Van Patten
PNOT() should be called when the battery status changes, to give the SOC an opportunity to handle it. This is in preparation for the low/no battery boot changes. This CL also updates the PNOT() comments to better match the name of the function and why it's called. BRANCH=none BUG=b:217911928 TEST=Boot skyrim Change-Id: I8b74313d242fd4959315a67579eb6c5f49a31a76 Signed-off-by: Tim Van Patten <timvp@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66993 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
2022-08-26x86: Zero SMBIOS region before writing tablesJonathon Hall
Clear the SMBIOS region before writing SMBIOS tables. On librem_mini and librem_mini_v2, CBMEM allocations are offset by 4K for reboots relative to the cold boot. This means the unused SMBIOS region could contain the first 4K of the ACPI tables from the last boot (including the signature), which prevents Linux from booting. The CBMEM 4K offset appears to be due to FSP allocating memory differently between cold boot and reboot, this appears to be normal and causes the CBMEM base address to change. It is not clear why Linux examines an ACPI signature found in this region, but boot logs over serial confirm that it sees the corrupt table. The table is supposed to be found just below 1M, and kernel source appears to look in this region, but it is definitely finding the corrupt table in CBMEM. Normal cold boot: [ 0.008615] ACPI: RSDP 0x00000000000F6190 000024 (v02 COREv4) [ 0.008619] ACPI: XSDT 0x0000000099B480E0 00005C (v01 COREv4 COREBOOT 00000000 CORE 20220331) [ 0.008624] ACPI: FACP 0x0000000099B4A2A0 000114 (v06 COREv4 COREBOOT 00000000 CORE 20220331) [ 0.008634] ACPI: DSDT 0x0000000099B48280 00201F (v02 COREv4 COREBOOT 20110725 INTL 20220331) ... Reboot with corrupt table: [ 0.008820] ACPI: RSDP 0x00000000000F6190 000024 (v02 COREv4) [ 0.008823] ACPI: XSDT 0x0000000099B480E0 00005C (v01 COREv4 COREBOOT 00000000 CORE 20220331) [ 0.008828] ACPI: ???G 0x0000000099B4A2A0 20002001 (v00 ?G?$ 47020100 ?, 47020100) [ 0.008831] ACPI: �y 0x0000000099B4A3C0 54523882 (v67 ?_HID? A�? 65520D4E al T 20656D69) ... There are no specific errors but it returns to the firmware soon after, presumably due to a fault. This appears to be so early in the boot that panic=0 on the kernel command line has no effect. Test: build/boot Librem Mini, Librem Mini v2 and reboot. Change-Id: Ia20d0b30160e89e8d96add34d7e0e881f070ec61 Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66377 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-08-26mb/google/nissa/var/pujjo: Add FW_CONFIG probe for new audio devicesLeo Chou
Add FW_CONFIG probe for new audio sku: ALC5682I + MAX98357 BUG=b:243474931 TEST=Boot to OS and verify audio devices are set based on fw_config. Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com> Change-Id: I16af6cf4644c473034e184e95ff2038ca31b20de Reviewed-on: https://review.coreboot.org/c/coreboot/+/67016 Reviewed-by: Reka Norman <rekanorman@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-26soc/intel/mtl: Activate TME on all CPUsTarun Tuli
This patch runs `set_tme_core_activate()` on all CPUs (BSP+APs) as per MTL processor EDS. TEST= Able to build and boot RVP. Confirmed TME supported mode detected via temporary debug prints and MSR 0x9ff indicates activated. Signed-off-by: Tarun Tuli <taruntuli@google.com> Change-Id: Id368925504d81025239e94698d2cb0e2266a5a96 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66949 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-26mb/google/nissa/var/craask: Enable Cnvi BT Audio Offload featureTyler Wang
This patch enables Cnvi BT Audio Offload feature and also configures the virtual GPIO for CNVi Bluetooth I2S pads. BUG=b:239670216 TEST=emerge-nissa coreboot Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Change-Id: Ibc7116e8dc5367fd94d29aba36b91778d0c21e4f Reviewed-on: https://review.coreboot.org/c/coreboot/+/66448 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org>
2022-08-26ec/starlabs/merlin/cml: Correct the offset for Max ChargeSean Rhodes
The offset for Max Charge is located at 0x1a, so correct this in the definitions and EC memory ACPI. Change-Id: I92cc452d1189e62db78aed787f2de65fd5096564 Signed-off-by: Sean Rhodes <sean@starlabs.systems> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66962 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-08-26mb/google/brask/variants/moli: Override tdp pl1 valueRaihow Shi
Follow the "619907 Alder Lake-S and Raptor Lake-S Platform" and "685472 Intel® Dynamic Tuning Technology (Intel® DTT)" to override tdp pl1 in 15w cpu MSR to 55w and in 28w cpu MSR to 64w. BUG=b:236294162 TEST=emerge-brask coreboot and check MSR_Package Power Limit-1 in 15w and 28w CPU is correct. Signed-off-by: Raihow Shi <raihow_shi@wistron.corp-partner.google.com> Change-Id: Icb3d7c72b672fbd3e2a9f7ad1f2d1cb2ffc798c6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66910 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-26soc/amd/picasso: Reserve space for BIOS SIG in BIOS imageRitul Guru
Change-Id: I68667d084001c753e74ba480fa7b6e09b1b88cb8 Signed-off-by: Ritul Guru <ritul.bits@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66369 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-26nb/intel/sandybridge: Align TOUUD down to 1 MiB granularityArthur Heymans
This register has a 1MiB granularity. The lowest bit is a lock bit. Change-Id: I688cb7818fc849784026ca0bc6acb7ef1ae92133 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66256 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-26mb/google/rex: Add mapping for GPIO_PCH_WPTarun Tuli
The define GPIO_PCH_WP needs to be mapped to GPP_H10 based on the Rex schematics 24/6/2022. TEST=Built and booted on Google Rex. Signed-off-by: Tarun Tuli <taruntuli@google.com> Change-Id: I2489c244bd4cbd9e10ed3db981a6e56a954b5e20 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67083 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-26mb/google/rex: Add mapping for EC_SYNC_IRQTarun Tuli
The define EC_SYNC_IRQ needs to be mapped to A17 based on the Rex schematics 24/6/2022. BUG=b:243781237 TEST=Successfully build rex and tested to ensure EC is now functional. Signed-off-by: Tarun Tuli <taruntuli@google.com> Change-Id: Ib61ddc9f73dd7b817d3b990bef8f0169f7cafbcd Reviewed-on: https://review.coreboot.org/c/coreboot/+/67082 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2022-08-26soc/intel/meteorlake: Provide access to IOE through P2SB SBI for TCSSJohn Zhao
This change provides access to IOE through P2SB Sideband interface for Meteor Lake TCSS functions of pad configuration and Thunderbolt authentication. There is a policy of locking the P2SB access at the end of platform initialization. The tbt_authentication is read from IOM register through IOE P2SB at early silicon initialization phase and its usage is deferred to usb4 driver. BUG=b:213574324 TEST=Built coreboot and validated booting to OS successfully on MTLRVP board. No boot hung was observed. Signed-off-by: John Zhao <john.zhao@intel.com> Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I8dcee90080c6e70dadc011cc1dbef3659fdbc8f7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66951 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-26soc/intel/p2sb: Refactor `p2sb_execute_sideband_access` functionSubrata Banik
This patch refactors p2sb_execute_sideband_access() to be able to handle SBI operations in both SMM and non-SMM scenarios. Prior to FSP-S operation being done, the IOE P2SB device will be visible on the PCI bus hence, performing the SBI operation using IOE P2SB doesn't involve unhide/hide operation. Post FSP-S, the IOE P2SB device is hidden. Additionally, SBI operations can't be performed as is. The only possible way to send SBI is inside SMM mode and to do that, coreboot needs to unhide the P2SB device prior to sending the SBI and hide it post sending SBI. As a result, the p2sb_execute_sideband_access() function has been refactored to manage these cases seamlessly without users of the p2sb_execute_sideband_access() actually being bothered about the calling mode. BUG=b:239806774 TEST=Able to perform p2sb_execute_sideband_access() function call in both SMM and non-SMM mode without any hang/die. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Iafebd5190deb50fd95382f17bf0248fcbfb23cb8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66950 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-08-25soc/amd: rework SPI flash MMIO region handlingFelix Held
Only 16 MByte of the SPI flash can be mapped right below the 4 GB boundary. In case of a larger SPI flash size, still only the 16 MByte region starting at 0xff000000 can be configured as WRPROT and be reserved for the MMIO mapped SPI flash region. The next 16 MByte MMIO region starting at address 0xfe000000 contain for example the LAPIC MMIO region, the ACPIMMIO region and the UART/I2C controller MMIO regions which shouldn't be configured as WRPROT. Reserving this region for the MMIO mapped SPI flash would also result in an overlap with the MMIO resources mentioned above. In the case of a smaller SPI flash, reserving the full 16 MByte flash MMIO region makes sure that the resource allocator won't try to put anything else in the lower parts of the 16 MByte SPI mapping region. To avoid the issues described above, always reserve/cache the maximum amount of 16 MBytes of flash that can be mapped below 4 GB. TEST=On boards with 16 MByte SPI flash chips, the resulting image of a timeless build doesn't change with this patch. Verified this on Chausie (Mendocino), Majolica (Cezanne), Cereme (Picasso) and Google/Careena (Stoneyridge). On Mandolin (Picasso) with an 8 MByte flash, the resulting image of a timeless build is different, but neither the coreboot console output nor the Linux dmesg output shows any errors that might be related to this change. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ie12bd48e48e267a84dc494f67e8e0c7a4a01a320 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66700 Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-25mb/google/brya/variants/crota: fine tune WWAN power sequencingTerry Chen
Because the poweron state of some of the WWAN GPIOs is the asserted state, this patch fixes the poweron sequence so that the WWAN module is always correctly powered on, in both cold and warm reboot scenarios. BUG=b:233564770 TEST=USE="project_crota emerge-brya coreboot" and verify it builds without error. Signed-off-by: Terry Chen <terry_chen@wistron.corp-partner.google.com> Change-Id: I4ec8312c30392b9ca0a3e0321cb4578e76ec5787 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64816 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-08-25mb/google/rex: Update DQS for RexTarun Tuli
Update the DQS for Rex as per the latest Rex schematics (08/25). BUG=b:243734885 TEST=Built successfully. Confirmed on HW. Change-Id: I2a458a3da725f953cbba8a194ac6f314f5467419 Signed-off-by: Tarun Tuli <taruntuli@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67041 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maulik Vaghela <maulikvaghela@google.com> Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
2022-08-25soc/intel/mtl: Hook up Lp5CccConfig FSP UPDKapil Porwal
Hook up Lp5CccConfig FSP UPD for Intel MeteorLake. BUG=b:243734885 TEST=Built and booted on Google Rex. Verified the UPD value in MRC log. Signed-off-by: Kapil Porwal <kapilporwal@google.com> Change-Id: I3d7ff8e08546f06cf7807ee825cfef84c14a6c5d Reviewed-on: https://review.coreboot.org/c/coreboot/+/67052 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Maulik Vaghela <maulikvaghela@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-08-25soc/intel/mtl: Hook up ECT FSP UPDKapil Porwal
Hook up ECT FSP UPD for Intel MeteorLake. BUG=b:243734885 TEST=Built and booted on Google Rex. Verified the UPD value in MRC log. Signed-off-by: Kapil Porwal <kapilporwal@google.com> Change-Id: Idc23717c3ce52e3635e2da41733058f912545e5f Reviewed-on: https://review.coreboot.org/c/coreboot/+/67051 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maulik Vaghela <maulikvaghela@google.com> Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-13 14:54:19 +0000